Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Joachim Eastwood | a583c24 | 2016-03-12 13:30:14 +0100 | [diff] [blame] | 2 | /* |
| 3 | * IIO ADC driver for NXP LPC18xx ADC |
| 4 | * |
| 5 | * Copyright (C) 2016 Joachim Eastwood <manabian@gmail.com> |
| 6 | * |
Joachim Eastwood | a583c24 | 2016-03-12 13:30:14 +0100 | [diff] [blame] | 7 | * UNSUPPORTED hardware features: |
| 8 | * - Hardware triggers |
| 9 | * - Burst mode |
| 10 | * - Interrupts |
| 11 | * - DMA |
| 12 | */ |
| 13 | |
| 14 | #include <linux/clk.h> |
| 15 | #include <linux/err.h> |
| 16 | #include <linux/iio/iio.h> |
| 17 | #include <linux/iio/driver.h> |
| 18 | #include <linux/io.h> |
| 19 | #include <linux/iopoll.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/mutex.h> |
| 22 | #include <linux/of.h> |
| 23 | #include <linux/of_device.h> |
| 24 | #include <linux/platform_device.h> |
| 25 | #include <linux/regulator/consumer.h> |
| 26 | |
| 27 | /* LPC18XX ADC registers and bits */ |
| 28 | #define LPC18XX_ADC_CR 0x000 |
| 29 | #define LPC18XX_ADC_CR_CLKDIV_SHIFT 8 |
| 30 | #define LPC18XX_ADC_CR_PDN BIT(21) |
| 31 | #define LPC18XX_ADC_CR_START_NOW (0x1 << 24) |
| 32 | #define LPC18XX_ADC_GDR 0x004 |
| 33 | |
| 34 | /* Data register bits */ |
| 35 | #define LPC18XX_ADC_SAMPLE_SHIFT 6 |
| 36 | #define LPC18XX_ADC_SAMPLE_MASK 0x3ff |
| 37 | #define LPC18XX_ADC_CONV_DONE BIT(31) |
| 38 | |
| 39 | /* Clock should be 4.5 MHz or less */ |
| 40 | #define LPC18XX_ADC_CLK_TARGET 4500000 |
| 41 | |
| 42 | struct lpc18xx_adc { |
| 43 | struct regulator *vref; |
| 44 | void __iomem *base; |
| 45 | struct device *dev; |
| 46 | struct mutex lock; |
| 47 | struct clk *clk; |
| 48 | u32 cr_reg; |
| 49 | }; |
| 50 | |
| 51 | #define LPC18XX_ADC_CHAN(_idx) { \ |
| 52 | .type = IIO_VOLTAGE, \ |
| 53 | .indexed = 1, \ |
| 54 | .channel = _idx, \ |
| 55 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 56 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| 57 | } |
| 58 | |
| 59 | static const struct iio_chan_spec lpc18xx_adc_iio_channels[] = { |
| 60 | LPC18XX_ADC_CHAN(0), |
| 61 | LPC18XX_ADC_CHAN(1), |
| 62 | LPC18XX_ADC_CHAN(2), |
| 63 | LPC18XX_ADC_CHAN(3), |
| 64 | LPC18XX_ADC_CHAN(4), |
| 65 | LPC18XX_ADC_CHAN(5), |
| 66 | LPC18XX_ADC_CHAN(6), |
| 67 | LPC18XX_ADC_CHAN(7), |
| 68 | }; |
| 69 | |
| 70 | static int lpc18xx_adc_read_chan(struct lpc18xx_adc *adc, unsigned int ch) |
| 71 | { |
| 72 | int ret; |
| 73 | u32 reg; |
| 74 | |
| 75 | reg = adc->cr_reg | BIT(ch) | LPC18XX_ADC_CR_START_NOW; |
| 76 | writel(reg, adc->base + LPC18XX_ADC_CR); |
| 77 | |
| 78 | ret = readl_poll_timeout(adc->base + LPC18XX_ADC_GDR, reg, |
| 79 | reg & LPC18XX_ADC_CONV_DONE, 3, 9); |
| 80 | if (ret) { |
| 81 | dev_warn(adc->dev, "adc read timed out\n"); |
| 82 | return ret; |
| 83 | } |
| 84 | |
| 85 | return (reg >> LPC18XX_ADC_SAMPLE_SHIFT) & LPC18XX_ADC_SAMPLE_MASK; |
| 86 | } |
| 87 | |
| 88 | static int lpc18xx_adc_read_raw(struct iio_dev *indio_dev, |
| 89 | struct iio_chan_spec const *chan, |
| 90 | int *val, int *val2, long mask) |
| 91 | { |
| 92 | struct lpc18xx_adc *adc = iio_priv(indio_dev); |
| 93 | |
| 94 | switch (mask) { |
| 95 | case IIO_CHAN_INFO_RAW: |
| 96 | mutex_lock(&adc->lock); |
| 97 | *val = lpc18xx_adc_read_chan(adc, chan->channel); |
| 98 | mutex_unlock(&adc->lock); |
| 99 | if (*val < 0) |
| 100 | return *val; |
| 101 | |
| 102 | return IIO_VAL_INT; |
| 103 | |
| 104 | case IIO_CHAN_INFO_SCALE: |
| 105 | *val = regulator_get_voltage(adc->vref) / 1000; |
| 106 | *val2 = 10; |
| 107 | |
| 108 | return IIO_VAL_FRACTIONAL_LOG2; |
| 109 | } |
| 110 | |
| 111 | return -EINVAL; |
| 112 | } |
| 113 | |
| 114 | static const struct iio_info lpc18xx_adc_info = { |
| 115 | .read_raw = lpc18xx_adc_read_raw, |
Joachim Eastwood | a583c24 | 2016-03-12 13:30:14 +0100 | [diff] [blame] | 116 | }; |
| 117 | |
| 118 | static int lpc18xx_adc_probe(struct platform_device *pdev) |
| 119 | { |
| 120 | struct iio_dev *indio_dev; |
| 121 | struct lpc18xx_adc *adc; |
| 122 | struct resource *res; |
| 123 | unsigned int clkdiv; |
| 124 | unsigned long rate; |
| 125 | int ret; |
| 126 | |
| 127 | indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); |
| 128 | if (!indio_dev) |
| 129 | return -ENOMEM; |
| 130 | |
| 131 | platform_set_drvdata(pdev, indio_dev); |
| 132 | adc = iio_priv(indio_dev); |
| 133 | adc->dev = &pdev->dev; |
| 134 | mutex_init(&adc->lock); |
| 135 | |
| 136 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 137 | adc->base = devm_ioremap_resource(&pdev->dev, res); |
| 138 | if (IS_ERR(adc->base)) |
| 139 | return PTR_ERR(adc->base); |
| 140 | |
| 141 | adc->clk = devm_clk_get(&pdev->dev, NULL); |
| 142 | if (IS_ERR(adc->clk)) { |
| 143 | dev_err(&pdev->dev, "error getting clock\n"); |
| 144 | return PTR_ERR(adc->clk); |
| 145 | } |
| 146 | |
| 147 | rate = clk_get_rate(adc->clk); |
| 148 | clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); |
| 149 | |
| 150 | adc->vref = devm_regulator_get(&pdev->dev, "vref"); |
| 151 | if (IS_ERR(adc->vref)) { |
| 152 | dev_err(&pdev->dev, "error getting regulator\n"); |
| 153 | return PTR_ERR(adc->vref); |
| 154 | } |
| 155 | |
| 156 | indio_dev->name = dev_name(&pdev->dev); |
| 157 | indio_dev->dev.parent = &pdev->dev; |
| 158 | indio_dev->info = &lpc18xx_adc_info; |
| 159 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 160 | indio_dev->channels = lpc18xx_adc_iio_channels; |
| 161 | indio_dev->num_channels = ARRAY_SIZE(lpc18xx_adc_iio_channels); |
| 162 | |
| 163 | ret = regulator_enable(adc->vref); |
| 164 | if (ret) { |
| 165 | dev_err(&pdev->dev, "unable to enable regulator\n"); |
| 166 | return ret; |
| 167 | } |
| 168 | |
| 169 | ret = clk_prepare_enable(adc->clk); |
| 170 | if (ret) { |
| 171 | dev_err(&pdev->dev, "unable to enable clock\n"); |
| 172 | goto dis_reg; |
| 173 | } |
| 174 | |
| 175 | adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) | |
| 176 | LPC18XX_ADC_CR_PDN; |
| 177 | writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR); |
| 178 | |
| 179 | ret = iio_device_register(indio_dev); |
| 180 | if (ret) { |
| 181 | dev_err(&pdev->dev, "unable to register device\n"); |
| 182 | goto dis_clk; |
| 183 | } |
| 184 | |
| 185 | return 0; |
| 186 | |
| 187 | dis_clk: |
| 188 | writel(0, adc->base + LPC18XX_ADC_CR); |
| 189 | clk_disable_unprepare(adc->clk); |
| 190 | dis_reg: |
| 191 | regulator_disable(adc->vref); |
| 192 | return ret; |
| 193 | } |
| 194 | |
| 195 | static int lpc18xx_adc_remove(struct platform_device *pdev) |
| 196 | { |
| 197 | struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| 198 | struct lpc18xx_adc *adc = iio_priv(indio_dev); |
| 199 | |
| 200 | iio_device_unregister(indio_dev); |
| 201 | |
| 202 | writel(0, adc->base + LPC18XX_ADC_CR); |
| 203 | clk_disable_unprepare(adc->clk); |
| 204 | regulator_disable(adc->vref); |
| 205 | |
| 206 | return 0; |
| 207 | } |
| 208 | |
| 209 | static const struct of_device_id lpc18xx_adc_match[] = { |
| 210 | { .compatible = "nxp,lpc1850-adc" }, |
| 211 | { /* sentinel */ } |
| 212 | }; |
| 213 | MODULE_DEVICE_TABLE(of, lpc18xx_adc_match); |
| 214 | |
| 215 | static struct platform_driver lpc18xx_adc_driver = { |
| 216 | .probe = lpc18xx_adc_probe, |
| 217 | .remove = lpc18xx_adc_remove, |
| 218 | .driver = { |
| 219 | .name = "lpc18xx-adc", |
| 220 | .of_match_table = lpc18xx_adc_match, |
| 221 | }, |
| 222 | }; |
| 223 | module_platform_driver(lpc18xx_adc_driver); |
| 224 | |
| 225 | MODULE_DESCRIPTION("LPC18xx ADC driver"); |
| 226 | MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); |
| 227 | MODULE_LICENSE("GPL v2"); |