|  | /* | 
|  | *	ALi M7101 PMU Computer Watchdog Timer driver | 
|  | * | 
|  | *	Based on w83877f_wdt.c by Scott Jennings <linuxdrivers@oro.net> | 
|  | *	and the Cobalt kernel WDT timer driver by Tim Hockin | 
|  | *	                                      <thockin@cobaltnet.com> | 
|  | * | 
|  | *	(c)2002 Steve Hill <steve@navaho.co.uk> | 
|  | * | 
|  | *  This WDT driver is different from most other Linux WDT | 
|  | *  drivers in that the driver will ping the watchdog by itself, | 
|  | *  because this particular WDT has a very short timeout (1.6 | 
|  | *  seconds) and it would be insane to count on any userspace | 
|  | *  daemon always getting scheduled within that time frame. | 
|  | * | 
|  | *  Additions: | 
|  | *   Aug 23, 2004 - Added use_gpio module parameter for use on revision a1d PMUs | 
|  | *                  found on very old cobalt hardware. | 
|  | *                  -- Mike Waychison <michael.waychison@sun.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/watchdog.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/system.h> | 
|  |  | 
|  | #define OUR_NAME "alim7101_wdt" | 
|  | #define PFX OUR_NAME ": " | 
|  |  | 
|  | #define WDT_ENABLE 0x9C | 
|  | #define WDT_DISABLE 0x8C | 
|  |  | 
|  | #define ALI_7101_WDT    0x92 | 
|  | #define ALI_7101_GPIO   0x7D | 
|  | #define ALI_7101_GPIO_O 0x7E | 
|  | #define ALI_WDT_ARM     0x01 | 
|  |  | 
|  | /* | 
|  | * We're going to use a 1 second timeout. | 
|  | * If we reset the watchdog every ~250ms we should be safe.  */ | 
|  |  | 
|  | #define WDT_INTERVAL (HZ/4+1) | 
|  |  | 
|  | /* | 
|  | * We must not require too good response from the userspace daemon. | 
|  | * Here we require the userspace daemon to send us a heartbeat | 
|  | * char to /dev/watchdog every 30 seconds. | 
|  | */ | 
|  |  | 
|  | #define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */ | 
|  | static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ | 
|  | module_param(timeout, int, 0); | 
|  | MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); | 
|  |  | 
|  | static int use_gpio = 0; /* Use the pic (for a1d revision alim7101) */ | 
|  | module_param(use_gpio, int, 0); | 
|  | MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog.  (required by old cobalt boards)"); | 
|  |  | 
|  | static void wdt_timer_ping(unsigned long); | 
|  | static struct timer_list timer; | 
|  | static unsigned long next_heartbeat; | 
|  | static unsigned long wdt_is_open; | 
|  | static char wdt_expect_close; | 
|  | static struct pci_dev *alim7101_pmu; | 
|  |  | 
|  | static int nowayout = WATCHDOG_NOWAYOUT; | 
|  | module_param(nowayout, int, 0); | 
|  | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); | 
|  |  | 
|  | /* | 
|  | *	Whack the dog | 
|  | */ | 
|  |  | 
|  | static void wdt_timer_ping(unsigned long data) | 
|  | { | 
|  | /* If we got a heartbeat pulse within the WDT_US_INTERVAL | 
|  | * we agree to ping the WDT | 
|  | */ | 
|  | char	tmp; | 
|  |  | 
|  | if(time_before(jiffies, next_heartbeat)) | 
|  | { | 
|  | /* Ping the WDT (this is actually a disarm/arm sequence) */ | 
|  | pci_read_config_byte(alim7101_pmu, 0x92, &tmp); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); | 
|  | if (use_gpio) { | 
|  | pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 
|  | | 0x20); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 
|  | & ~0x20); | 
|  | } | 
|  | } else { | 
|  | printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); | 
|  | } | 
|  | /* Re-set the timer interval */ | 
|  | timer.expires = jiffies + WDT_INTERVAL; | 
|  | add_timer(&timer); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Utility routines | 
|  | */ | 
|  |  | 
|  | static void wdt_change(int writeval) | 
|  | { | 
|  | char	tmp; | 
|  |  | 
|  | pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); | 
|  | if (writeval == WDT_ENABLE) { | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); | 
|  | if (use_gpio) { | 
|  | pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); | 
|  | if (use_gpio) { | 
|  | pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wdt_startup(void) | 
|  | { | 
|  | next_heartbeat = jiffies + (timeout * HZ); | 
|  |  | 
|  | /* We must enable before we kick off the timer in case the timer | 
|  | occurs as we ping it */ | 
|  |  | 
|  | wdt_change(WDT_ENABLE); | 
|  |  | 
|  | /* Start the timer */ | 
|  | timer.expires = jiffies + WDT_INTERVAL; | 
|  | add_timer(&timer); | 
|  |  | 
|  |  | 
|  | printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); | 
|  | } | 
|  |  | 
|  | static void wdt_turnoff(void) | 
|  | { | 
|  | /* Stop the timer */ | 
|  | del_timer_sync(&timer); | 
|  | wdt_change(WDT_DISABLE); | 
|  | printk(KERN_INFO PFX "Watchdog timer is now disabled...\n"); | 
|  | } | 
|  |  | 
|  | static void wdt_keepalive(void) | 
|  | { | 
|  | /* user land ping */ | 
|  | next_heartbeat = jiffies + (timeout * HZ); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * /dev/watchdog handling | 
|  | */ | 
|  |  | 
|  | static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) | 
|  | { | 
|  | /* See if we got the magic character 'V' and reload the timer */ | 
|  | if(count) { | 
|  | if (!nowayout) { | 
|  | size_t ofs; | 
|  |  | 
|  | /* note: just in case someone wrote the magic character | 
|  | * five months ago... */ | 
|  | wdt_expect_close = 0; | 
|  |  | 
|  | /* now scan */ | 
|  | for (ofs = 0; ofs != count; ofs++) { | 
|  | char c; | 
|  | if (get_user(c, buf+ofs)) | 
|  | return -EFAULT; | 
|  | if (c == 'V') | 
|  | wdt_expect_close = 42; | 
|  | } | 
|  | } | 
|  | /* someone wrote to us, we should restart timer */ | 
|  | wdt_keepalive(); | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int fop_open(struct inode * inode, struct file * file) | 
|  | { | 
|  | /* Just in case we're already talking to someone... */ | 
|  | if(test_and_set_bit(0, &wdt_is_open)) | 
|  | return -EBUSY; | 
|  | /* Good, fire up the show */ | 
|  | wdt_startup(); | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static int fop_close(struct inode * inode, struct file * file) | 
|  | { | 
|  | if(wdt_expect_close == 42) | 
|  | wdt_turnoff(); | 
|  | else { | 
|  | /* wim: shouldn't there be a: del_timer(&timer); */ | 
|  | printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); | 
|  | } | 
|  | clear_bit(0, &wdt_is_open); | 
|  | wdt_expect_close = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | void __user *argp = (void __user *)arg; | 
|  | int __user *p = argp; | 
|  | static struct watchdog_info ident = | 
|  | { | 
|  | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, | 
|  | .firmware_version = 1, | 
|  | .identity = "ALiM7101", | 
|  | }; | 
|  |  | 
|  | switch(cmd) | 
|  | { | 
|  | case WDIOC_GETSUPPORT: | 
|  | return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; | 
|  | case WDIOC_GETSTATUS: | 
|  | case WDIOC_GETBOOTSTATUS: | 
|  | return put_user(0, p); | 
|  | case WDIOC_KEEPALIVE: | 
|  | wdt_keepalive(); | 
|  | return 0; | 
|  | case WDIOC_SETOPTIONS: | 
|  | { | 
|  | int new_options, retval = -EINVAL; | 
|  |  | 
|  | if(get_user(new_options, p)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if(new_options & WDIOS_DISABLECARD) { | 
|  | wdt_turnoff(); | 
|  | retval = 0; | 
|  | } | 
|  |  | 
|  | if(new_options & WDIOS_ENABLECARD) { | 
|  | wdt_startup(); | 
|  | retval = 0; | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | case WDIOC_SETTIMEOUT: | 
|  | { | 
|  | int new_timeout; | 
|  |  | 
|  | if(get_user(new_timeout, p)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ | 
|  | return -EINVAL; | 
|  |  | 
|  | timeout = new_timeout; | 
|  | wdt_keepalive(); | 
|  | /* Fall through */ | 
|  | } | 
|  | case WDIOC_GETTIMEOUT: | 
|  | return put_user(timeout, p); | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct file_operations wdt_fops = { | 
|  | .owner=		THIS_MODULE, | 
|  | .llseek=	no_llseek, | 
|  | .write=		fop_write, | 
|  | .open=		fop_open, | 
|  | .release=	fop_close, | 
|  | .ioctl=		fop_ioctl, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice wdt_miscdev = { | 
|  | .minor=WATCHDOG_MINOR, | 
|  | .name="watchdog", | 
|  | .fops=&wdt_fops, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *	Notifier for system down | 
|  | */ | 
|  |  | 
|  | static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) | 
|  | { | 
|  | if (code==SYS_DOWN || code==SYS_HALT) | 
|  | wdt_turnoff(); | 
|  |  | 
|  | if (code==SYS_RESTART) { | 
|  | /* | 
|  | * Cobalt devices have no way of rebooting themselves other than | 
|  | * getting the watchdog to pull reset, so we restart the watchdog on | 
|  | * reboot with no heartbeat | 
|  | */ | 
|  | wdt_change(WDT_ENABLE); | 
|  | printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n"); | 
|  | } | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	The WDT needs to learn about soft shutdowns in order to | 
|  | *	turn the timebomb registers off. | 
|  | */ | 
|  |  | 
|  | static struct notifier_block wdt_notifier= | 
|  | { | 
|  | .notifier_call = wdt_notify_sys, | 
|  | }; | 
|  |  | 
|  | static void __exit alim7101_wdt_unload(void) | 
|  | { | 
|  | wdt_turnoff(); | 
|  | /* Deregister */ | 
|  | misc_deregister(&wdt_miscdev); | 
|  | unregister_reboot_notifier(&wdt_notifier); | 
|  | pci_dev_put(alim7101_pmu); | 
|  | } | 
|  |  | 
|  | static int __init alim7101_wdt_init(void) | 
|  | { | 
|  | int rc = -EBUSY; | 
|  | struct pci_dev *ali1543_south; | 
|  | char tmp; | 
|  |  | 
|  | printk(KERN_INFO PFX "Steve Hill <steve@navaho.co.uk>.\n"); | 
|  | alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, | 
|  | NULL); | 
|  | if (!alim7101_pmu) { | 
|  | printk(KERN_INFO PFX "ALi M7101 PMU not present - WDT not set\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Set the WDT in the PMU to 1 second */ | 
|  | pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02); | 
|  |  | 
|  | ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, | 
|  | NULL); | 
|  | if (!ali1543_south) { | 
|  | printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n"); | 
|  | goto err_out; | 
|  | } | 
|  | pci_read_config_byte(ali1543_south, 0x5e, &tmp); | 
|  | pci_dev_put(ali1543_south); | 
|  | if ((tmp & 0x1e) == 0x00) { | 
|  | if (!use_gpio) { | 
|  | printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n"); | 
|  | goto err_out; | 
|  | } | 
|  | nowayout = 1; | 
|  | } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { | 
|  | printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ | 
|  | { | 
|  | timeout = WATCHDOG_TIMEOUT; | 
|  | printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", | 
|  | timeout); | 
|  | } | 
|  |  | 
|  | init_timer(&timer); | 
|  | timer.function = wdt_timer_ping; | 
|  | timer.data = 1; | 
|  |  | 
|  | rc = misc_register(&wdt_miscdev); | 
|  | if (rc) { | 
|  | printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", | 
|  | wdt_miscdev.minor, rc); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | rc = register_reboot_notifier(&wdt_notifier); | 
|  | if (rc) { | 
|  | printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", | 
|  | rc); | 
|  | goto err_out_miscdev; | 
|  | } | 
|  |  | 
|  | if (nowayout) { | 
|  | __module_get(THIS_MODULE); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", | 
|  | timeout, nowayout); | 
|  | return 0; | 
|  |  | 
|  | err_out_miscdev: | 
|  | misc_deregister(&wdt_miscdev); | 
|  | err_out: | 
|  | pci_dev_put(alim7101_pmu); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | module_init(alim7101_wdt_init); | 
|  | module_exit(alim7101_wdt_unload); | 
|  |  | 
|  | MODULE_AUTHOR("Steve Hill"); | 
|  | MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |