| Sat Jan 18 15:51:45 1997 Richard Henderson <rth@tamu.edu> |
| |
| * Don't play with usage_count directly, instead hand around |
| the module header and use the module macros. |
| |
| Fri May 17 00:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com> |
| |
| * BusLogic Driver Version 2.0.3 Released. |
| |
| Tue Apr 16 21:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com> |
| |
| * BusLogic Driver Version 1.3.2 Released. |
| |
| Sun Dec 31 23:26:00 1995 Leonard N. Zubkoff <lnz@dandelion.com> |
| |
| * BusLogic Driver Version 1.3.1 Released. |
| |
| Fri Nov 10 15:29:49 1995 Leonard N. Zubkoff <lnz@dandelion.com> |
| |
| * Released new BusLogic driver. |
| |
| Wed Aug 9 22:37:04 1995 Andries Brouwer <aeb@cwi.nl> |
| |
| As a preparation for new device code, separated the various |
| functions the request->dev field had into the device proper, |
| request->rq_dev and a status field request->rq_status. |
| |
| The 2nd argument of bios_param is now a kdev_t. |
| |
| Wed Jul 19 10:43:15 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all |
| attached devices. |
| |
| * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and |
| eata_dma_proc.c to produce some device info for /proc/scsi. |
| |
| * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done): |
| Changed handling of internal SCSI commands send to the HBA. |
| |
| |
| Wed Jul 19 10:09:17 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.11 released. |
| |
| * eata_dma.c (eata_queue)(eata_int_handler): Added code to do |
| command latency measurements if requested by root through |
| /proc/scsi interface. |
| Throughout Use HZ constant for time references. |
| |
| * eata_pio.c: Use HZ constant for time references. |
| |
| * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD |
| to GNU style. |
| |
| * scsi.h: Added READ_12 command opcode constant |
| |
| Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.10 released. |
| |
| * scsi_proc.c (dispatch_scsi_info): Removed unused variable. |
| |
| Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.9 released. |
| |
| * scsi.c Blacklist concept expanded to 'support' more device |
| deficiencies. blacklist[] renamed to device_list[] |
| (scan_scsis): Code cleanup. |
| |
| * scsi_debug.c (scsi_debug_proc_info): Added support to control |
| device lockup simulation via /proc/scsi interface. |
| |
| |
| Wed Jul 19 09:22:34 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.7 released. |
| |
| * scsi_proc.c: Fixed a number of bugs in directory handling |
| |
| Wed Jul 19 09:18:28 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.5 released. |
| |
| * Native wide, multichannel and /proc/scsi support now in official |
| kernel distribution. |
| |
| * scsi.c/h, hosts.c/h et al reindented to increase readability |
| (especially on 80 column wide terminals). |
| |
| * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added |
| /proc/scsi/scsi which allows root to scan for hotplugged devices. |
| |
| * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi. |
| (scan_scsis): Added some 'spaghetti' code to allow scanning for |
| single devices. |
| |
| |
| Thu Jun 20 15:20:27 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * proc.c: Renamed to scsi_proc.c |
| |
| Mon Jun 12 20:32:45 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * Linux 1.3.0 released. |
| |
| Mon May 15 19:33:14 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * scsi.c: Added native multichannel and wide scsi support. |
| |
| * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries): |
| Updated /proc/scsi interface. |
| |
| Thu May 4 17:58:48 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> |
| |
| * sd.c (requeue_sd_request): Zero out the scatterlist only if |
| scsi_malloc returned memory for it. |
| |
| * eata_dma.c (register_HBA) (eata_queue): Add support for |
| large scatter/gather tables and set use_clustering accordingly |
| |
| * hosts.c: Make use_clustering changeable in the Scsi_Host structure. |
| |
| Wed Apr 12 15:25:52 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.2.5 released. |
| |
| * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff). |
| Fixed interrupt routine to avoid races when handling multiple |
| complete commands per interrupt. Seems to come up with faster |
| cards. |
| |
| * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling |
| throughout and fixed bug interrupt routine which resulted in shifted |
| status bytes. Added blink LED state checks for ISA and EISA HBAs. |
| Memory management bug seems to have disappeared ==> increasing |
| C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for |
| performance reasons. |
| |
| * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan |
| the bus, assume that it was just noise on the bus, and ignore |
| the device. |
| |
| * scsi.h: Update and add a bunch of missing commands which we |
| were never using. |
| |
| * sd.c: Use restore_flags in do_sd_request - this may result in |
| latency conditions, but it gets rid of races and crashes. |
| Do not save flags again when searching for a second command to |
| queue. |
| |
| * st.c: Use bytes, not STP->buffer->buffer_size when reading |
| from tape. |
| |
| |
| Tue Apr 4 09:42:08 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.2.4 released. |
| |
| * st.c: Fix typo - restoring wrong flags. |
| |
| Wed Mar 29 06:55:12 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.2.3 released. |
| |
| * st.c: Perform some waiting operations with interrupts off. |
| Is this correct??? |
| |
| Wed Mar 22 10:34:26 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.2.2 released. |
| |
| * aha152x.c: Modularize. Add support for PCMCIA. |
| |
| * eata.c: Update to version 2.0. Fixed bug preventing media |
| detection. If scsi_register_host returns NULL, fail gracefully. |
| |
| * scsi.c: Detect as NEC (for photo-cd purposes) for the 84 |
| and 25 models as "NEC_OLDCDR". |
| |
| * scsi.h: Add define for NEC_OLDCDR |
| |
| * sr.c: Add handling for NEC_OLDCDR. Treat as unknown. |
| |
| * u14-34f.c: Update to version 2.0. Fixed same bug as in |
| eata.c. |
| |
| |
| Mon Mar 6 11:11:20 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.2.0 released. Yeah!!! |
| |
| * Minor spelling/punctuation changes throughout. Nothing |
| substantive. |
| |
| Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.95 released. |
| |
| * qlogic.c: Update to version 0.41. |
| |
| * seagate.c: Change some message to be more descriptive about what |
| we detected. |
| |
| * sr.c: spelling/whitespace changes. |
| |
| Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.94 released. |
| |
| Mon Feb 20 08:57:17 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.93 released. |
| |
| * hosts.h: Change io_port to long int from short. |
| |
| * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP, |
| NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output |
| fixed, should initialize correctly if left running, now loadable, |
| new memory allocation, extraneous diagnostic output suppressed, |
| splx() replaced with save/restore flags. [ Drew ] |
| |
| * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c, |
| sr_ioctl.c: Add special junk at end that Emacs will use for |
| formatting the file. |
| |
| * qlogic.c: Update to v0.40a. Improve parity handling. |
| |
| * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in |
| many places. Use scsi_init_malloc to get command block - may |
| need this to be dma compatible for some host adapters. |
| Restore interrupts after unregistering a host. |
| |
| * sd.c: Use sti instead of restore flags - causes latency problems. |
| |
| * seagate.c: Use controller_type to determine string used when |
| registering irq. |
| |
| * sr.c: More photo-cd hacks to make sure we get the xa stuff right. |
| * sr.h, sr.c: Change is_xa to xa_flags field. |
| |
| * st.c: Disable retries for write operations. |
| |
| Wed Feb 15 10:52:56 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.92 released. |
| |
| * eata.c: Update to 1.17. |
| |
| * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi. |
| Continuing modularization. Less crashes because of the bug in the |
| memory management ==> increase C_P_L_CURRENT_MAX to 10 |
| and decrease C_P_L_DIV to 4. |
| |
| * hosts.c: If we remove last host registered, reuse host number. |
| When freeing memory from host being deregistered, free extra_bytes |
| too. |
| |
| * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt. |
| Change memory allocation to work around bugs in __get_dma_pages. |
| Do not free host if usage count is not zero (for modules). |
| |
| * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000. |
| |
| * st.c: Allow for ST_EXTRA_DEVS in st data structures. |
| |
| * u14-34f.c: Update to 1.17. |
| |
| Thu Feb 9 10:11:16 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.91 released. |
| |
| * eata.c: Update to 1.16. Use wish_block instead of host->block. |
| |
| * hosts.c: Initialize wish_block to 0. |
| |
| * hosts.h: Add wish_block. |
| |
| * scsi.c: Use wish_block as indicator that the host should be added |
| to block list. |
| |
| * sg.c: Add SG_EXTRA_DEVS to number of slots. |
| |
| * u14-34f.c: Use wish_block. |
| |
| Tue Feb 7 11:46:04 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.90 released. |
| |
| * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15. |
| Update interrupt handler to take pt_regs as arg. Allow blocking |
| even if loaded as module. Initialize target_time_out array. |
| Do not put sti(); in timing loop. |
| |
| * hosts.c: Do not reuse host numbers. |
| Use scsi_make_blocked_list to generate blocking list. |
| |
| * script_asm.pl: Beats me. Don't know perl. Something to do with |
| phase index. |
| |
| * scsi.c (scsi_make_blocked_list): New function - code copied from |
| hosts.c. |
| |
| * scsi.c: Update code to disable photo CD for Toshiba cdroms. |
| Use just manufacturer name, not model number. |
| |
| * sr.c: Fix setting density for Toshiba drives. |
| |
| * u14-34f.c: Clear target_time_out array during reset. |
| |
| Wed Feb 1 09:20:45 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.89 released. |
| |
| * Makefile, u14-34f.c: Modularize. |
| |
| * Makefile, eata.c: Modularize. Now version 1.14 |
| |
| * NCR5380.c: Update interrupt handler with new arglist. Minor |
| cleanups. |
| |
| * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi. |
| New version 2.3.0a. Add code in interrupt handler to allow |
| certain CDROM drivers to be detected which return a |
| CHECK_CONDITION during SCSI bus scan. Add opcode check to get |
| all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag. |
| Improvements in HBA identification. Various other minor stuff. |
| |
| * hosts.c: Initialize ->dma_channel and ->io_port when registering |
| a new host. |
| |
| * qlogic.c: Modularize and add PCMCIA support. |
| |
| * scsi.c: Add Hitachi to blacklist. |
| |
| * scsi.c: Change default to no lun scan (too many problem devices). |
| |
| * scsi.h: Define QUEUE_FULL condition. |
| |
| * sd.c: Do not check for non-existent partition until after |
| new media check. |
| |
| * sg.c: Undo previous change which was wrong. |
| |
| * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000. |
| |
| * st.c: Patches from Kai - improve filemark handling. |
| |
| Tue Jan 31 17:32:12 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.88 released. |
| |
| * Throughout - spelling/grammar fixups. |
| |
| * scsi.c: Make sure that all buffers are 16 byte aligned - some |
| drivers (buslogic) need this. |
| |
| * scsi.c (scan_scsis): Remove message printed. |
| |
| * scsi.c (scsi_init): Move message here. |
| |
| Mon Jan 30 06:40:25 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.87 released. |
| |
| * sr.c: Photo-cd related changes. (Gerd Knorr??). |
| |
| * st.c: Changes from Kai related to EOM detection. |
| |
| Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.86 released. |
| |
| * 53c7,8xx.h: Change SG size to 127. |
| |
| * eata_dma: Update to version 2.10i. Remove bug in the registration |
| of multiple HBAs and channels. Minor other improvements and stylistic |
| changes. |
| |
| * scsi.c: Test for Toshiba XM-3401TA and exclude from detection |
| as toshiba drive - photo cd does not work with this drive. |
| |
| * sr.c: Update photocd code. |
| |
| Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.85 released. |
| |
| * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c: |
| include linux/mm.h |
| |
| * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h. |
| |
| Sun Jan 22 22:08:46 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.84 released. |
| |
| * Makefile: Support for loadable QLOGIC boards. |
| |
| * aha152x.c: Update to version 1.8 from Juergen. |
| |
| * eata_dma.c: Update from Michael Neuffer. |
| Remove hard limit of 2 commands per lun and make it better |
| configurable. Improvements in HBA identification. |
| |
| * in2000.c: Fix biosparam to support large disks. |
| |
| * qlogic.c: Minor changes (change sti -> restore_flags). |
| |
| Wed Jan 18 23:33:09 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.83 released. |
| |
| * aha1542.c(aha1542_intr_handle): Use arguments handed down to find |
| which irq. |
| |
| * buslogic.c: Likewise. |
| |
| * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards. |
| |
| * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK. |
| |
| * sd.c: Fail if we are opening a non-existent partition. |
| |
| * sr.c: Bump SR_TIMEOUT to 15000. |
| Do not probe for media size at boot time(hard on changers). |
| Flag device as needing sector size instead. |
| |
| * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl. |
| |
| * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args). |
| |
| Mon Jan 16 07:18:23 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.82 released. |
| |
| Throughout. |
| - Change all interrupt handlers to accept new calling convention. |
| In particular, we now receive the irq number as one of the arguments. |
| |
| * More minor spelling corrections in some of the new files. |
| |
| * aha1542.c, buslogic.c: Clean up interrupt handler a little now |
| that we receive the irq as an arg. |
| |
| * aha274x.c: s/snarf_region/request_region/ |
| |
| * eata.c: Update to version 1.12. Fix some comments and display a |
| message if we cannot reserve the port addresses. |
| |
| * u14-34f.c: Update to version 1.13. Fix some comments and display a |
| message if we cannot reserve the port addresses. |
| |
| * eata_dma.c: Define get_board_data function (send INQUIRY command). |
| Use to improve detection of variants of different DPT boards. Change |
| version subnumber to "0g". |
| |
| * fdomain.c: Update to version 5.26. Improve detection of some boards |
| repackaged by IBM. |
| |
| * scsi.c (scsi_register_host): Change "name" to const char *. |
| |
| * sr.c: Fix problem in set mode command for Toshiba drives. |
| |
| * sr.c: Fix typo from patch 81. |
| |
| Fri Jan 13 12:54:46 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.81 released. Codefreeze for 1.2 release announced. |
| |
| Big changes here. |
| |
| * eata_dma.*: New files from Michael Neuffer. |
| (neuffer@goofy.zdv.uni-mainz.de). Should support |
| all eata/dpt cards. |
| |
| * hosts.c, Makefile: Add eata_dma. |
| |
| * README.st: Document MTEOM. |
| |
| Patches from me (ERY) to finish support for low-level loadable scsi. |
| It now works, and is actually useful. |
| |
| * Throughout - add new argument to scsi_init_malloc that takes an |
| additional parameter. This is used as a priority to kmalloc, |
| and you can specify the GFP_DMA flag if you need DMA-able memory. |
| |
| * Makefile: For source files that are loadable, always add name |
| to SCSI_SRCS. Fill in modules: target. |
| |
| * hosts.c: Change next_host to next_scsi_host, and make global. |
| Print hosts after we have identified all of them. Use info() |
| function if present, otherwise use name field. |
| |
| * hosts.h: Change attach function to return int, not void. |
| Define number of device slots to allow for loadable devices. |
| Define tags to tell scsi module code what type of module we |
| are loading. |
| |
| * scsi.c: Fix scan_scsis so that it can be run by a user process. |
| Do not use waiting loops - use up and down mechanism as long |
| as current != task[0]. |
| |
| * scsi.c(scan_scsis): Do not use stack variables for I/O - this |
| could be > 16Mb if we are loading a module at runtime (i.e. use |
| scsi_init_malloc to get some memory we know will be safe). |
| |
| * scsi.c: Change dma freelist to be a set of pages. This allows |
| us to dynamically adjust the size of the list by adding more pages |
| to the pagelist. Fix scsi_malloc and scsi_free accordingly. |
| |
| * scsi_module.c: Fix include. |
| |
| * sd.c: Declare detach function. Increment/decrement module usage |
| count as required. Fix init functions to allow loaded devices. |
| Revalidate all new disks so we get the partition tables. Define |
| detach function. |
| |
| * sr.c: Likewise. |
| |
| * sg.c: Declare detach function. Allow attachment of devices on |
| loaded drivers. |
| |
| * st.c: Declare detach function. Increment/decrement module usage |
| count as required. |
| |
| Tue Jan 10 10:09:58 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.79 released. |
| |
| Patch from some undetermined individual who needs to get a life :-). |
| |
| * sr.c: Attacked by spelling bee... |
| |
| Patches from Gerd Knorr: |
| |
| * sr.c: make printk messages for photoCD a little more informative. |
| |
| * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl. |
| |
| Mon Jan 9 10:01:37 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.78 released. |
| |
| * Makefile: Add empty modules: target. |
| |
| * Wheee. Now change register_iomem to request_region. |
| |
| * in2000.c: Bugfix - apparently this is the fix that we have |
| all been waiting for. It fixes a problem whereby the driver |
| is not stable under heavy load. Race condition and all that. |
| Patch from Peter Lu. |
| |
| Wed Jan 4 21:17:40 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.77 released. |
| |
| * 53c7,8xx.c: Fix from Linus - emulate splx. |
| |
| Throughout: |
| |
| Change "snarf_region" with "register_iomem". |
| |
| * scsi_module.c: New file. Contains support for low-level loadable |
| scsi drivers. [ERY]. |
| |
| * sd.c: More s/int/long/ changes. |
| |
| * seagate.c: Explicitly include linux/config.h |
| |
| * sg.c: Increment/decrement module usage count on open/close. |
| |
| * sg.c: Be a bit more careful about the user not supplying enough |
| information for a valid command. Pass correct size down to |
| scsi_do_cmd. |
| |
| * sr.c: More changes for Photo-CD. This apparently breaks NEC drives. |
| |
| * sr_ioctl.c: Support CDROMMULTISESSION ioctl. |
| |
| |
| Sun Jan 1 19:55:21 1995 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.76 released. |
| |
| * constants.c: Add type cast in switch statement. |
| |
| * scsi.c (scsi_free): Change datatype of "offset" to long. |
| (scsi_malloc): Change a few more variables to long. Who |
| did this and why was it important? 64 bit machines? |
| |
| |
| Lots of changes to use save_state/restore_state instead of cli/sti. |
| Files changed include: |
| |
| * aha1542.c: |
| * aha1740.c: |
| * buslogic.c: |
| * in2000.c: |
| * scsi.c: |
| * scsi_debug.c: |
| * sd.c: |
| * sr.c: |
| * st.c: |
| |
| Wed Dec 28 16:38:29 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.75 released. |
| |
| * buslogic.c: Spelling fix. |
| |
| * scsi.c: Add HP C1790A and C2500A scanjet to blacklist. |
| |
| * scsi.c: Spelling fixup. |
| |
| * sd.c: Add support for sd_hardsizes (hard sector sizes). |
| |
| * ultrastor.c: Use save_flags/restore_flags instead of cli/sti. |
| |
| Fri Dec 23 13:36:25 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.74 released. |
| |
| * README.st: Update from Kai Makisara. |
| |
| * eata.c: New version from Dario - version 1.11. |
| use scsicam bios_param routine. Add support for 2011 |
| and 2021 boards. |
| |
| * hosts.c: Add support for blocking. Linked list automatically |
| generated when shpnt->block is set. |
| |
| * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for |
| kicking things loose when we deadlock. |
| |
| * scsi.c: Recognize scanners and processors in scan_scsis. |
| |
| * scsi_ioctl.h: Increase timeout to 9 seconds. |
| |
| * st.c: New version from Kai - add better support for backspace. |
| |
| * u14-34f.c: New version from Dario. Supports blocking. |
| |
| Wed Dec 14 14:46:30 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.73 released. |
| |
| * buslogic.c: Update from Dave Gentzel. Version 1.14. |
| Add module related stuff. More fault tolerant if out of |
| DMA memory. |
| |
| * fdomain.c: New version from Rik Faith - version 5.22. Add support |
| for ISA-200S SCSI adapter. |
| |
| * hosts.c: Spelling. |
| |
| * qlogic.c: Update to version 0.38a. Add more support for PCMCIA. |
| |
| * scsi.c: Mask device type with 0x1f during scan_scsis. |
| Add support for deadlocking, err, make that getting out of |
| deadlock situations that are created when we allow the user |
| to limit requests to one host adapter at a time. |
| |
| * scsi.c: Bugfix - pass pid, not SCpnt as second arg to |
| scsi_times_out. |
| |
| * scsi.c: Restore interrupt state to previous value instead of using |
| cli/sti pairs. |
| |
| * scsi.c: Add a bunch of module stuff (all commented out for now). |
| |
| * scsi.c: Clean up scsi_dump_status. |
| |
| Tue Dec 6 12:34:20 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.72 released. |
| |
| * sg.c: Bugfix - always use sg_free, since we might have big buff. |
| |
| Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.71 released. |
| |
| * sg.c: Clear buff field when not in use. Only call scsi_free if |
| non-null. |
| |
| * scsi.h: Call wake_up(&wait_for_request) when done with a |
| command. |
| |
| * scsi.c (scsi_times_out): Pass pid down so that we can protect |
| against race conditions. |
| |
| * scsi.c (scsi_abort): Zero timeout field if we get the |
| NOT_RUNNING message back from low-level driver. |
| |
| |
| * scsi.c (scsi_done): Restore cmd_len, use_sg here. |
| |
| * scsi.c (request_sense): Not here. |
| |
| * hosts.h: Add new forbidden_addr, forbidden_size fields. Who |
| added these and why???? |
| |
| * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in |
| the forbidden regions. I am not sure - I think this is so that |
| we can deal with boards that do incomplete decoding of their |
| address lines for the bios chips, but I am not entirely sure. |
| |
| * buslogic.c: Set forbidden_addr stuff if using a buggy board. |
| |
| * aha1740.c: Test for NULL pointer in SCtmp. This should not |
| occur, but a nice message is better than a kernel segfault. |
| |
| * 53c7,8xx.c: Add new PCI chip ID for 815. |
| |
| Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.70 released. |
| |
| * ChangeLog, st.c: Spelling. |
| |
| Tue Nov 29 18:48:42 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.69 released. |
| |
| * u14-34f.h: Non-functional change. [Dario]. |
| |
| * u14-34f.c: Use block field in Scsi_Host to prevent commands from |
| being queued to more than one host at the same time (used when |
| motherboard does not deal with multiple bus-masters very well). |
| Only when SINGLE_HOST_OPERATIONS is defined. |
| Use new cmd_per_lun field. [Dario] |
| |
| * eata.c: Likewise. |
| |
| * st.c: More changes from Kai. Add ready flag to indicate drive |
| status. |
| |
| * README.st: Document this. |
| |
| * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd |
| code. |
| |
| * sg.c: Bugfix - fix problem where opcode is not correctly set up. |
| |
| * seagate.[c,h]: Use #defines to set driver name. |
| |
| * scsi_ioctl.c: Zero buffer before executing command. |
| |
| * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate. |
| Add Sony CDU55S to blacklist. |
| |
| * hosts.h: Add new cmd_per_lun field to Scsi_Hosts. |
| |
| * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template. |
| |
| * buslogic.c: Use cmd_per_lun field - initialize to different |
| values depending upon bus type (i.e. use 1 if ISA, so we do not |
| hog memory). Use other patches which got lost from 1.1.68. |
| |
| * aha1542.c: Spelling. |
| |
| Tue Nov 29 15:43:50 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.68 released. |
| |
| Add support for 12 byte vendor specific commands in scsi-generics, |
| more (i.e. the last mandatory) low-level changes to support |
| loadable modules, plus a few other changes people have requested |
| lately. Changes by me (ERY) unless otherwise noted. Spelling |
| changes appear from some unknown corner of the universe. |
| |
| * Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len. |
| |
| * Throughout: Change info() low level function to take a Scsi_Host |
| pointer. This way the info function can return specific |
| information about the host in question, if desired. |
| |
| * All low-level drivers: Add NULL in initializer for the |
| usage_count field added to Scsi_Host_Template. |
| |
| * aha152x.[c,h]: Remove redundant info() function. |
| |
| * aha1542.[c,h]: Likewise. |
| |
| * aha1740.[c,h]: Likewise. |
| |
| * aha274x.[c,h]: Likewise. |
| |
| * eata.[c,h]: Likewise. |
| |
| * pas16.[c,h]: Likewise. |
| |
| * scsi_debug.[c,h]: Likewise. |
| |
| * t128.[c,h]: Likewise. |
| |
| * u14-34f.[c,h]: Likewise. |
| |
| * ultrastor.[c,h]: Likewise. |
| |
| * wd7000.[c,h]: Likewise. |
| |
| * aha1542.c: Add support for command line options with lilo to set |
| DMA parameters, I/O port. From Matt Aarnio. |
| |
| * buslogic.[c,h]: New version (1.13) from Dave Gentzel. |
| |
| * hosts.h: Add new field to Scsi_Hosts "block" to allow blocking |
| all I/O to certain other cards. Helps prevent problems with some |
| ISA motherboards. |
| |
| * hosts.h: Add usage_count to Scsi_Host_Template. |
| |
| * hosts.h: Add n_io_port to Scsi_Host (used when releasing module). |
| |
| * hosts.c: Initialize block field. |
| |
| * in2000.c: Remove "static" declarations from exported functions. |
| |
| * in2000.h: Likewise. |
| |
| * scsi.c: Correctly set cmd_len field as required. Save and |
| change setting when doing a request_sense, restore when done. |
| Move abort timeout message. Fix panic in request_queueable to |
| print correct function name. |
| |
| * scsi.c: When incrementing usage count, walk block linked list |
| for host, and or in SCSI_HOST_BLOCK bit. When decrementing usage |
| count to 0, clear this bit to allow usage to continue, wake up |
| processes waiting. |
| |
| |
| * scsi_ioctl.c: If we have an info() function, call it, otherwise |
| if we have a "name" field, use it, else do nothing. |
| |
| * sd.c, sr.c: Clear cmd_len field prior to each command we |
| generate. |
| |
| * sd.h: Add "has_part_table" bit to rscsi_disks. |
| |
| * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e. |
| override command length in COMMAND_SIZE). |
| |
| * sr.c: Bugfix from Gerd in photocd code. |
| |
| * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer - |
| we cannot guarantee that the stack is < 16Mb. |
| |
| Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.67 released. |
| |
| * sr.c: Change spelling of manufactor to manufacturer. |
| |
| * scsi.h: Likewise. |
| |
| * scsi.c: Likewise. |
| |
| * qlogic.c: Spelling corrections. |
| |
| * in2000.h: Spelling corrections. |
| |
| * in2000.c: Update from Bill Earnest, change from |
| jshiffle@netcom.com. Support new bios versions. |
| |
| * README.qlogic: Spelling correction. |
| |
| Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.66 released. |
| |
| * u14-34f.c: Spelling corrections. |
| |
| * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr. |
| |
| * scsi.h: Add manufactor field for keeping track of device |
| manufacturer. |
| |
| * scsi.c: More spelling corrections. |
| |
| * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha. |
| |
| * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest. |
| |
| * fdomain.c: Spelling correction. |
| |
| * eata.c: Spelling correction. |
| |
| Fri Nov 18 15:22:44 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.65 released. |
| |
| * eata.h: Update version string to 1.08.00. |
| |
| * eata.c: Set sg_tablesize correctly for DPT PM2012 boards. |
| |
| * aha274x.seq: Spell checking. |
| |
| * README.st: Likewise. |
| |
| * README.aha274x: Likewise. |
| |
| * ChangeLog: Likewise. |
| |
| Tue Nov 15 15:35:08 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.64 released. |
| |
| * u14-34f.h: Update version number to 1.10.01. |
| |
| * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template. |
| |
| * eata.[c,h]: New driver for DPT boards from Dario Ballabio. |
| |
| * buslogic.c: Use can_queue field. |
| |
| Wed Nov 30 12:09:09 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.63 released. |
| |
| * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with |
| 1024 byte sectors. |
| |
| * scsicam.c: Make sure we do read from whole disk (mask off |
| partition). |
| |
| * scsi.c: Use can_queue in Scsi_Host structure. |
| Fix panic message about invalid host. |
| |
| * hosts.c: Initialize can_queue from template. |
| |
| * hosts.h: Add can_queue to Scsi_Host structure. |
| |
| * aha1740.c: Print out warning about NULL ecbptr. |
| |
| Fri Nov 4 12:40:30 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.62 released. |
| |
| * fdomain.c: Update to version 5.20. (From Rik Faith). Support |
| BIOS version 3.5. |
| |
| * st.h: Add ST_EOD symbol. |
| |
| * st.c: Patches from Kai Makisara - support additional densities, |
| add support for MTFSS, MTBSS, MTWSM commands. |
| |
| * README.st: Update to document new commands. |
| |
| * scsi.c: Add Mediavision CDR-H93MV to blacklist. |
| |
| Sat Oct 29 20:57:36 1994 Eric Youngdale (eric@andante.aib.com) |
| |
| * Linux 1.1.60 released. |
| |
| * u14-34f.[c,h]: New driver from Dario Ballabio. |
| |
| * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c, |
| README.aha274x: New files, new driver from John Aycock. |
| |
| |
| Tue Oct 11 08:47:39 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.54 released. |
| |
| * Add third PCI chip id. [Drew] |
| |
| * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric]. |
| |
| * ultrastor.c: Fix asm directives for new GCC. |
| |
| * sr.c, sd.c: Use new end_scsi_request function. |
| |
| * scsi.h(end_scsi_request): Return pointer to block if still |
| active, else return NULL if inactive. Fixes race condition. |
| |
| Sun Oct 9 20:23:14 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.53 released. |
| |
| * scsi.c: Do not allocate dma bounce buffers if we have exactly |
| 16Mb. |
| |
| Fri Sep 9 05:35:30 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.51 released. |
| |
| * aha152x.c: Add support for disabling the parity check. Update |
| to version 1.4. [Juergen]. |
| |
| * seagate.c: Tweak debugging message. |
| |
| Wed Aug 31 10:15:55 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.50 released. |
| |
| * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen]. |
| |
| * scsi.c: Add Quantum PD1225S to blacklist. |
| |
| Fri Aug 26 09:38:45 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.49 released. |
| |
| * sd.c: Fix bug when we were deleting the wrong entry if we |
| get an unsupported sector size device. |
| |
| * sr.c: Another spelling patch. |
| |
| Thu Aug 25 09:15:27 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.48 released. |
| |
| * Throughout: Use new semantics for request_dma, as appropriate. |
| |
| * sr.c: Print correct device number. |
| |
| Sun Aug 21 17:49:23 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.47 released. |
| |
| * NCR5380.c: Add support for LIMIT_TRANSFERSIZE. |
| |
| * constants.h: Add prototype for print_Scsi_Cmnd. |
| |
| * pas16.c: Some more minor tweaks. Test for Mediavision board. |
| Allow for disks > 1Gb. [Drew??] |
| |
| * sr.c: Set SCpnt->transfersize. |
| |
| Tue Aug 16 17:29:35 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.46 released. |
| |
| * Throughout: More spelling fixups. |
| |
| * buslogic.c: Add a few more fixups from Dave. Disk translation |
| mainly. |
| |
| * pas16.c: Add a few patches (Drew?). |
| |
| |
| Thu Aug 11 20:45:15 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.44 released. |
| |
| * hosts.c: Add type casts for scsi_init_malloc. |
| |
| * scsicam.c: Add type cast. |
| |
| Wed Aug 10 19:23:01 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.43 released. |
| |
| * Throughout: Spelling cleanups. [??] |
| |
| * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c, |
| t128.c: Use request_irq, not irqaction. [??] |
| |
| * aha1542.c: Move test for shost before we start to use shost. |
| |
| * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new |
| calling sequence for request_irq. |
| |
| * buslogic.c: Update from Dave Gentzel. |
| |
| Tue Aug 9 09:32:59 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.42 released. |
| |
| * NCR5380.c: Change NCR5380_print_status to static. |
| |
| * seagate.c: A few more bugfixes. Only Drew knows what they are |
| for. |
| |
| * ultrastor.c: Tweak some __asm__ directives so that it works |
| with newer compilers. [??] |
| |
| Sat Aug 6 21:29:36 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.40 released. |
| |
| * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function. |
| |
| * aha1542.c: Reset mailbox status after a bus device reset. |
| |
| * constants.c: Fix typo (;;). |
| |
| * g_NCR5380.c: |
| * pas16.c: Correct usage of NCR5380_init. |
| |
| * scsi.c: Remove redundant (and unused variables). |
| |
| * sd.c: Use memset to clear all of rscsi_disks before we use it. |
| |
| * sg.c: Ditto, except for scsi_generics. |
| |
| * sr.c: Ditto, except for scsi_CDs. |
| |
| * st.c: Initialize STp->device. |
| |
| * seagate.c: Fix bug. [Drew] |
| |
| Thu Aug 4 08:47:27 1994 Eric Youngdale (eric@andante) |
| |
| * Linux 1.1.39 released. |
| |
| * Makefile: Fix typo in NCR53C7xx. |
| |
| * st.c: Print correct number for device. |
| |
| Tue Aug 2 11:29:14 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.38 released. |
| |
| Lots of changes in 1.1.38. All from Drew unless otherwise noted. |
| |
| * 53c7,8xx.c: New file from Drew. PCI driver. |
| |
| * 53c7,8xx.h: Likewise. |
| |
| * 53c7,8xx.scr: Likewise. |
| |
| * 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise. |
| |
| * scsicam.c: New file from Drew. Read block 0 on the disk and |
| read the partition table. Attempt to deduce the geometry from |
| the partition table if possible. Only used by 53c[7,8]xx right |
| now, but could be used by any device for which we have no way |
| of identifying the geometry. |
| |
| * sd.c: Use device letters instead of sd%d in a lot of messages. |
| |
| * seagate.c: Fix bug that resulted in lockups with some devices. |
| |
| * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open |
| device for write. |
| |
| * hosts.c, Makefile: Update for new driver. |
| |
| * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support |
| 53C400 chip. |
| |
| * constants.c: Define CONST_CMND and CONST_MSG. Other minor |
| cleanups along the way. Improve handling of CONST_MSG. |
| |
| * fdomain.c, fdomain.h: New version from Rik Faith. Update to |
| 5.18. Should now support TMC-3260 PCI card with 18C30 chip. |
| |
| * pas16.c: Update with new irq initialization. |
| |
| * t128.c: Update with minor cleanups. |
| |
| * scsi.c (scsi_pid): New variable - gives each command a unique |
| id. Add Quantum LPS5235S to blacklist. Change in_scan to |
| in_scan_scsis and make global. |
| |
| * scsi.h: Add some defines for extended message handling, |
| INITIATE/RELEASE_RECOVERY. Add a few new fields to support sync |
| transfers. |
| |
| * scsi_ioctl.h: Add ioctl to request synchronous transfers. |
| |
| |
| Tue Jul 26 21:36:58 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.37 released. |
| |
| * aha1542.c: Always call aha1542_mbenable, use new udelay |
| mechanism so we do not wait a long time if the board does not |
| implement this command. |
| |
| * g_NCR5380.c: Remove #include <linux/config.h> and #if |
| defined(CONFIG_SCSI_*). |
| |
| * seagate.c: Likewise. |
| |
| Next round of changes to support loadable modules. Getting closer |
| now, still not possible to do anything remotely usable. |
| |
| hosts.c: Create a linked list of detected high level devices. |
| (scsi_register_device): New function to insert into this list. |
| (scsi_init): Call scsi_register_device for each of the known high |
| level drivers. |
| |
| hosts.h: Add prototype for linked list header. Add structure |
| definition for device template structure which defines the linked |
| list. |
| |
| scsi.c: (scan_scsis): Use linked list instead of knowledge about |
| existing high level device drivers. |
| (scsi_dev_init): Use init functions for drivers on linked list |
| instead of explicit list to initialize and attach devices to high |
| level drivers. |
| |
| scsi.h: Add new field "attached" to scsi_device - count of number |
| of high level devices attached. |
| |
| sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new |
| scheme. |
| |
| Sat Jul 23 13:03:17 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.35 released. |
| |
| * ultrastor.c: Change constraint on asm() operand so that it works |
| with gcc 2.6.0. |
| |
| Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.33 released. |
| |
| * sr.c(sr_open): Do not allow opens with write access. |
| |
| Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.31 released. |
| |
| * sd.c: Increase SD_TIMEOUT from 300 to 600. |
| |
| * sr.c: Remove stray task_struct* variable that was no longer |
| used. |
| |
| * sr_ioctl.c: Fix typo in up() call. |
| |
| Sun Jul 17 16:25:29 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.30 released. |
| |
| * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives |
| that report themselves as disk drives. |
| |
| * (Throughout): Use request.sem instead of request.waiting. |
| Should fix swap problem with fdomain. |
| |
| Thu Jul 14 10:51:42 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.29 released. |
| |
| * scsi.c (scan_scsis): Add new devices to end of linked list, not |
| to the beginning. |
| |
| * scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save |
| the task state before sleeping. |
| |
| Sat Jul 9 15:01:03 1994 Eric Youngdale (eric@esp22) |
| |
| More changes to eventually support loadable modules. Mainly |
| we want to use linked lists instead of arrays because it is easier |
| to dynamically add and remove things this way. |
| |
| Quite a bit more work is needed before loadable modules are |
| possible (and usable) with scsi, but this is most of the grunge |
| work. |
| |
| * Linux 1.1.28 released. |
| |
| * scsi.c, scsi.h (allocate_device, request_queueable): Change |
| argument from index into scsi_devices to a pointer to the |
| Scsi_Device struct. |
| |
| * Throughout: Change all calls to allocate_device, |
| request_queueable to use new calling sequence. |
| |
| * Throughout: Use SCpnt->device instead of |
| scsi_devices[SCpnt->index]. Ugh - the pointer was there all along |
| - much cleaner this way. |
| |
| * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions - |
| allow us to pretend that we have a working malloc when we |
| initialize. Use this instead of passing memory_start, memory_end |
| around all over the place. |
| |
| * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use |
| scsi_init_malloc, remove all arguments, no return value. |
| |
| * scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd |
| structs. |
| |
| * scsi.c (scsi_dev_init): Set up for scsi_init_malloc. |
| (scan_scsis): Get SDpnt from scsi_init_malloc, and refresh |
| when we discover a device. Free pointer before returning. |
| Change scsi_devices into a linked list. |
| |
| * scsi.c (scan_scsis): Change to only scan one host. |
| (scsi_dev_init): Loop over all detected hosts, and scan them. |
| |
| * hosts.c (scsi_init_free): Change so that number of extra bytes |
| is stored in struct, and we do not have to pass it each time. |
| |
| * hosts.h: Change Scsi_Host_Template struct to include "next" and |
| "release" functions. Initialize to NULL in all low level |
| adapters. |
| |
| * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked |
| list scsi_hosts, linked together with the new "next" field. |
| |
| Wed Jul 6 05:45:02 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.25 released. |
| |
| * aha152x.c: Changes from Juergen - cleanups and updates. |
| |
| * sd.c, sr.c: Use new check_media_change and revalidate |
| file_operations fields. |
| |
| * st.c, st.h: Add changes from Kai Makisara, dated Jun 22. |
| |
| * hosts.h: Change SG_ALL back to 0xff. Apparently soft error |
| in /dev/brain resulted in having this bumped up. |
| Change first parameter in bios_param function to be Disk * instead |
| of index into rscsi_disks. |
| |
| * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index |
| to array. |
| |
| * sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk. |
| |
| * scsi.c: Remove redundant Maxtor XT8760S from blacklist. |
| In scsi_reset, add printk when DEBUG defined. |
| |
| * All low level drivers: Modify definitions of bios_param in |
| appropriate way. |
| |
| Thu Jun 16 10:31:59 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.20 released. |
| |
| * scsi_ioctl.c: Only pass down the actual number of characters |
| required to scsi_do_cmd, not the one rounded up to a even number |
| of sectors. |
| |
| * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support |
| larger SG lists. |
| |
| * ultrastor.c: Changes from me - use scsi_register to register |
| host. Add some consistency checking, |
| |
| Wed Jun 1 21:12:13 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.19 released. |
| |
| * scsi.h: Add new return code for reset() function: |
| SCSI_RESET_PUNT. |
| |
| * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for |
| now. |
| |
| * aha1542.c: If the command responsible for the reset is not |
| pending, return SCSI_RESET_PUNT. |
| |
| * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return |
| SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE. |
| |
| Tue May 31 19:36:01 1994 Eric Youngdale (eric@esp22) |
| |
| * buslogic.c: Do not print out message about "must be Adaptec" |
| if we have detected a buslogic card. Print out a warning message |
| if we are configuring for >16Mb, since the 445S at board level |
| D or earlier does not work right. The "D" level board can be made |
| to work by flipping an undocumented switch, but this is too subtle. |
| |
| Changes based upon patches in Yggdrasil distribution. |
| |
| * sg.c, sg.h: Return sense data to user. |
| |
| * aha1542.c, aha1740.c, buslogic.c: Do not panic if |
| sense buffer is wrong size. |
| |
| * hosts.c: Test for ultrastor card before any of the others. |
| |
| * scsi.c: Allow boot-time option for max_scsi_luns=? so that |
| buggy firmware has an easy work-around. |
| |
| Sun May 15 20:24:34 1994 Eric Youngdale (eric@esp22) |
| |
| * Linux 1.1.15 released. |
| |
| Post-codefreeze thaw... |
| |
| * buslogic.[c,h]: New driver from David Gentzel. |
| |
| * hosts.h: Add use_clustering field to explicitly say whether |
| clustering should be used for devices attached to this host |
| adapter. The buslogic board apparently supports large SG lists, |
| but it is apparently faster if sd.c condenses this into a smaller |
| list. |
| |
| * sd.c: Use this field instead of heuristic. |
| |
| * All host adapter include files: Add appropriate initializer for |
| use_clustering field. |
| |
| * scsi.h: Add #defines for return codes for the abort and reset |
| functions. There are now a specific set of return codes to fully |
| specify all of the possible things that the low-level adapter |
| could do. |
| |
| * scsi.c: Act based upon return codes from abort/reset functions. |
| |
| * All host adapter abort/reset functions: Return new return code. |
| |
| * Add code in scsi.c to help debug timeouts. Use #define |
| DEBUG_TIMEOUT to enable this. |
| |
| * scsi.c: If the host->irq field is set, use |
| disable_irq/enable_irq before calling queuecommand if we |
| are not already in an interrupt. Reduce races, and we |
| can be sloppier about cli/sti in the interrupt routines now |
| (reduce interrupt latency). |
| |
| * constants.c: Fix some things to eliminate warnings. Add some |
| sense descriptions that were omitted before. |
| |
| * aha1542.c: Watch for SCRD from host adapter - if we see it, set |
| a flag. Currently we only print out the number of pending |
| commands that might need to be restarted. |
| |
| * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still |
| full, and attempt to recover. Otherwise give up. |
| |
| * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass |
| DID_RESET back up to the upper level code for all commands running |
| on this target (even on different LUNs). |
| |
| Sat May 7 14:54:01 1994 |
| |
| * Linux 1.1.12 released. |
| |
| * st.c, st.h: New version from Kai. Supports boot time |
| specification of number of buffers. |
| |
| * wd7000.[c,h]: Updated driver from John Boyd. Now supports |
| more than one wd7000 board in machine at one time, among other things. |
| |
| Wed Apr 20 22:20:35 1994 |
| |
| * Linux 1.1.8 released. |
| |
| * sd.c: Add a few type casts where scsi_malloc is called. |
| |
| Wed Apr 13 12:53:29 1994 |
| |
| * Linux 1.1.4 released. |
| |
| * scsi.c: Clean up a few printks (use %p to print pointers). |
| |
| Wed Apr 13 11:33:02 1994 |
| |
| * Linux 1.1.3 released. |
| |
| * fdomain.c: Update to version 5.16 (Handle different FIFO sizes |
| better). |
| |
| Fri Apr 8 08:57:19 1994 |
| |
| * Linux 1.1.2 released. |
| |
| * Throughout: SCSI portion of cluster diffs added. |
| |
| Tue Apr 5 07:41:50 1994 |
| |
| * Linux 1.1 development tree initiated. |
| |
| * The linux 1.0 development tree is now effectively frozen except |
| for obvious bugfixes. |
| |
| ****************************************************************** |
| ****************************************************************** |
| ****************************************************************** |
| ****************************************************************** |
| |
| Sun Apr 17 00:17:39 1994 |
| |
| * Linux 1.0, patchlevel 9 released. |
| |
| * fdomain.c: Update to version 5.16 (Handle different FIFO sizes |
| better). |
| |
| Thu Apr 7 08:36:20 1994 |
| |
| * Linux 1.0, patchlevel8 released. |
| |
| * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios. |
| |
| Sun Apr 3 14:43:03 1994 |
| |
| * Linux 1.0, patchlevel6 released. |
| |
| * wd7000.c: Make stab at fixing race condition. |
| |
| Sat Mar 26 14:14:50 1994 |
| |
| * Linux 1.0, patchlevel5 released. |
| |
| * aha152x.c, Makefile: Fix a few bugs (too much data message). |
| Add a few more bios signatures. (Patches from Juergen). |
| |
| * aha1542.c: Fix race condition in aha1542_out. |
| |
| Mon Mar 21 16:36:20 1994 |
| |
| * Linux 1.0, patchlevel3 released. |
| |
| * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt |
| to open a non-existent device. |
| |
| * scsi.c: Add Chinon cdrom to blacklist. |
| |
| * sr_ioctl.c: Check return status of verify_area. |
| |
| Sat Mar 6 16:06:19 1994 |
| |
| * Linux 1.0 released (technically a pre-release). |
| |
| * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist. |
| |
| Tue Feb 15 10:58:20 1994 |
| |
| * pl15e released. |
| |
| * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned |
| off. |
| |
| * constants.c: Fix typo in definition of CONSTANTS. |
| |
| * pl15d released. |
| |
| Fri Feb 11 10:10:16 1994 |
| |
| * pl15c released. |
| |
| * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist. |
| |
| * scsi.c: Allow tagged queueing for scsi 3 devices as well. |
| Some really old devices report a version number of 0. Disallow |
| LUN != 0 for these. |
| |
| Thu Feb 10 09:48:57 1994 |
| |
| * pl15b released. |
| |
| Sun Feb 6 12:19:46 1994 |
| |
| * pl15a released. |
| |
| Fri Feb 4 09:02:17 1994 |
| |
| * scsi.c: Add Teac cdrom to blacklist. |
| |
| Thu Feb 3 14:16:43 1994 |
| |
| * pl15 released. |
| |
| Tue Feb 1 15:47:43 1994 |
| |
| * pl14w released. |
| |
| * wd7000.c (wd_bases): Fix typo in last change. |
| |
| Mon Jan 24 17:37:23 1994 |
| |
| * pl14u released. |
| |
| * aha1542.c: Support 1542CF/extended bios. Different from 1542C |
| |
| * wd7000.c: Allow bios at 0xd8000 as well. |
| |
| * ultrastor.c: Do not truncate cylinders to 1024. |
| |
| * fdomain.c: Update to version 5.9 (add new bios signature). |
| |
| * NCR5380.c: Update from Drew - should work a lot better now. |
| |
| Sat Jan 8 15:13:10 1994 |
| |
| * pl14o released. |
| |
| * sr_ioctl.c: Zero reserved field before trying to set audio volume. |
| |
| Wed Jan 5 13:21:10 1994 |
| |
| * pl14m released. |
| |
| * fdomain.c: Update to version 5.8. No functional difference??? |
| |
| Tue Jan 4 14:26:13 1994 |
| |
| * pl14l released. |
| |
| * ultrastor.c: Remove outl, inl functions (now provided elsewhere). |
| |
| Mon Jan 3 12:27:25 1994 |
| |
| * pl14k released. |
| |
| * aha152x.c: Remove insw and outsw functions. |
| |
| * fdomain.c: Ditto. |
| |
| Wed Dec 29 09:47:20 1993 |
| |
| * pl14i released. |
| |
| * scsi.c: Support RECOVERED_ERROR for tape drives. |
| |
| * st.c: Update of tape driver from Kai. |
| |
| Tue Dec 21 09:18:30 1993 |
| |
| * pl14g released. |
| |
| * aha1542.[c,h]: Support extended BIOS stuff. |
| |
| * scsi.c: Clean up messages about disks, so they are displayed as |
| sda, sdb, etc instead of sd0, sd1, etc. |
| |
| * sr.c: Force reread of capacity if disk was changed. |
| Clear buffer before asking for capacity/sectorsize (some drives |
| do not report this properly). Set needs_sector_size flag if |
| drive did not return sensible sector size. |
| |
| Mon Dec 13 12:13:47 1993 |
| |
| * aha152x.c: Update to version .101 from Juergen. |
| |
| Mon Nov 29 03:03:00 1993 |
| |
| * linux 0.99.14 released. |
| |
| * All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi. |
| |
| * Throughout: Grammatical corrections to various comments. |
| |
| * Makefile: fix so that we do not need to compile things we are |
| not going to use. |
| |
| * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c, |
| pas16.h, t128.c, t128.h: New files from Drew. |
| |
| * aha152x.c, aha152x.h: New files from Juergen Fischer. |
| |
| * aha1542.c: Support for more than one 1542 in the machine |
| at the same time. Make functions static that do not need |
| visibility. |
| |
| * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we |
| know to restart the command. Change prototype of aha1740_reset |
| to take a command pointer. |
| |
| * constants.c: Clean up a few things. |
| |
| * fdomain.c: Update to version 5.6. Move snarf_region. Allow |
| board to be set at different SCSI ids. Remove support for |
| reselection (did not work well). Set JUMPSTART flag in reset |
| code. |
| |
| * hosts.c: Support new low-level adapters. Allow for more than |
| one adapter of a given type. |
| |
| * hosts.h: Allow for more than one adapter of a given type. |
| |
| * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set |
| after a low-level reset, start the command again. Sort blacklist, |
| and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N. |
| |
| * scsi.h: Add constants for tagged queueing. |
| |
| * Throughout: Use constants from major.h instead of hardcoded |
| numbers for major numbers. |
| |
| * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use |
| verify_area in GET_IDLUN ioctl. Add new ioctls for |
| TAGGED_QUEUE_ENABLE, DISABLE. Only allow IOCTL_SEND_COMMAND by |
| superuser. |
| |
| * sd.c: Only pay attention to UNIT_ATTENTION for removable disks. |
| Fix bug where sometimes portions of blocks would get lost |
| resulting in processes hanging. Add messages when we spin up a |
| disk, and fix a bug in the timing. Increase read-ahead for disks |
| that are on a scatter-gather capable host adapter. |
| |
| * seagate.c: Fix so that some parameters can be set from the lilo |
| prompt. Supply jumpstart flag if we are resetting and need the |
| command restarted. Fix so that we return 1 if we detect a card |
| so that multiple card detection works correctly. Add yet another |
| signature for FD cards (950). Add another signature for ST0x. |
| |
| * sg.c, sg.h: New files from Lawrence Foard for generic scsi |
| access. |
| |
| * sr.c: Add type casts for (void*) so that we can do pointer |
| arithmetic. Works with GCC without this, but it is not strictly |
| correct. Same bugfix as was in sd.c. Increase read-ahead a la |
| disk driver. |
| |
| * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack |
| since we cannot guarantee that the stack is < 16Mb. |
| |
| ultrastor.c: Update to support 24f properly (JFC's driver). |
| |
| wd7000.c: Supply jumpstart flag for reset. Do not round up |
| number of cylinders in biosparam function. |
| |
| Sat Sep 4 20:49:56 1993 |
| |
| * 0.99pl13 released. |
| |
| * Throughout: Use check_region/snarf_region for all low-level |
| drivers. |
| |
| * aha1542.c: Do hard reset instead of soft (some ethercard probes |
| screw us up). |
| |
| * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are |
| in a loop whereby the device returns null sense data. |
| |
| * sd.c: Add code to spin up a drive if it is not already spinning. |
| Do this one at a time to make it easier on power supplies. |
| |
| * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl. |
| |
| * seagate.c: Switch around DATA/CONTROL lines. |
| |
| * st.c: Change sense to unsigned. |
| |
| Thu Aug 5 11:59:18 1993 |
| |
| * 0.99pl12 released. |
| |
| * constants.c, constants.h: New files with ascii descriptions of |
| various conditions. |
| |
| * Makefile: Do not try to count the number of low-level drivers, |
| just generate the list of .o files. |
| |
| * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests |
| for addresses > 16Mb, panic if we find one. |
| |
| * aha1740.c: Ditto with sizeof(). |
| |
| * fdomain.c: Update to version 3.18. Add new signature, register IRQ |
| with irqaction. Use ID 7 for new board. Be more intelligent about |
| obtaining the h/s/c numbers for biosparam. |
| |
| * hosts.c: Do not depend upon Makefile generated count of the number |
| of low-level host adapters. |
| |
| * scsi.c: Use array for scsi_command_size instead of a function. Add |
| Texel cdrom and Maxtor XT-4380S to blacklist. Allow compile time |
| option for no-multi lun scan. Add semaphore for possible problems |
| with handshaking, assume device is faulty until we know it not to be |
| the case. Add DEBUG_INIT symbol to dump info as we scan for devices. |
| Zero sense buffer so we can tell if we need to request it. When |
| examining sense information, request sense if buffer is all zero. |
| If RESET, request sense information to see what to do next. |
| |
| * scsi_debug.c: Change some constants to use symbols like INT_MAX. |
| |
| * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl |
| calls from kernel space. |
| |
| * sd.c: Increase timeout to 300. Use functions in constants.h to |
| display info. Use scsi_malloc buffer for READ_CAPACITY, since |
| we cannot guarantee that a stack based buffer is < 16Mb. |
| |
| * sd_ioctl.c: Add BLKFLSBUF ioctl. |
| |
| * seagate.c: Add new compile time options for ARBITRATE, |
| SLOW_HANDSHAKE, and SLOW_RATE. Update assembly loops for transferring |
| data. Use kernel_scsi_ioctl to request mode page with geometry. |
| |
| * sr.c: Use functions in constants.c to display messages. |
| |
| * st.c: Support for variable block size. |
| |
| * ultrastor.c: Do not use cache for tape drives. Set |
| unchecked_isa_dma flag, even though this may not be needed (gets set |
| later). |
| |
| Sat Jul 17 18:32:44 1993 |
| |
| * 0.99pl11 released. C++ compilable. |
| |
| * Throughout: Add type casts all over the place, and use "ip" instead |
| of "info" in the various biosparam functions. |
| |
| * Makefile: Compile seagate.c with C++ compiler. |
| |
| * aha1542.c: Always set ccb pointer as this gets trashed somehow on |
| some systems. Add a few type casts. Update biosparam function a little. |
| |
| * aha1740.c: Add a few type casts. |
| |
| * fdomain.c: Update to version 3.17 from 3.6. Now works with |
| TMC-18C50. |
| |
| * scsi.c: Minor changes here and there with datatypes. Save use_sg |
| when requesting sense information so that this can properly be |
| restored if we retry the command. Set aside dma buffers assuming each |
| block is 1 page, not 1Kb minix block. |
| |
| * scsi_ioctl.c: Add a few type casts. Other minor changes. |
| |
| * sd.c: Correctly free all scsi_malloc'd memory if we run out of |
| dma_pool. Store blocksize information for each partition. |
| |
| * seagate.c: Minor cleanups here and there. |
| |
| * sr.c: Set up blocksize array for all discs. Fix bug in freeing |
| buffers if we run out of dma pool. |
| |
| Thu Jun 2 17:58:11 1993 |
| |
| * 0.99pl10 released. |
| |
| * aha1542.c: Support for BT 445S (VL-bus board with no dma channel). |
| |
| * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50. |
| |
| * scsi.c: First attempt to fix problem with old_use_sg. Change |
| NOT_READY to a SUGGEST_ABORT. Fix timeout race where time might |
| get decremented past zero. |
| |
| * sd.c: Add block_fsync function to dispatch table. |
| |
| * sr.c: Increase timeout to 500 from 250. Add entry for sync in |
| dispatch table (supply NULL). If we do not have a sectorsize, |
| try to get it in the sd_open function. Add new function just to |
| obtain sectorsize. |
| |
| * sr.h: Add needs_sector_size semaphore. |
| |
| * st.c: Add NULL for fsync in dispatch table. |
| |
| * wd7000.c: Allow another condition for power on that are normal |
| and do not require a panic. |
| |
| Thu Apr 22 23:10:11 1993 |
| |
| * 0.99pl9 released. |
| |
| * aha1542.c: Use (void) instead of () in setup_mailboxes. |
| |
| * scsi.c: Initialize transfersize and underflow fields in SCmd to 0. |
| Do not panic for unsupported message bytes. |
| |
| * scsi.h: Allocate 12 bytes instead of 10 for commands. Add |
| transfersize and underflow fields. |
| |
| * scsi_ioctl.c: Further bugfix to ioctl_probe. |
| |
| * sd.c: Use long instead of int for last parameter in sd_ioctl. |
| Initialize transfersize and underflow fields. |
| |
| * sd_ioctl.c: Ditto for sd_ioctl(,,,,); |
| |
| * seagate.c: New version from Drew. Includes new signatures for FD |
| cards. Support for 0ws jumper. Correctly initialize |
| scsi_hosts[hostnum].this_id. Improved handing of |
| disconnect/reconnect, and support command linking. Use |
| transfersize and underflow fields. Support scatter-gather. |
| |
| * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl. |
| Use buffer and buflength in do_ioctl. Patches from Chris Newbold for |
| scsi-2 audio commands. |
| |
| * ultrastor.c: Comment out in_byte (compiler warning). |
| |
| * wd7000.c: Change () to (void) in wd7000_enable_dma. |
| |
| Wed Mar 31 16:36:25 1993 |
| |
| * 0.99pl8 released. |
| |
| * aha1542.c: Handle mailboxes better for 1542C. |
| Do not truncate number of cylinders at 1024 for biosparam call. |
| |
| * aha1740.c: Fix a few minor bugs for multiple devices. |
| Same as above for biosparam. |
| |
| * scsi.c: Add lockable semaphore for removable devices that can have |
| media removal prevented. Add another signature for flopticals. |
| (allocate_device): Fix race condition. Allow more space in dma pool |
| for blocksizes of up to 4Kb. |
| |
| * scsi.h: Define COMMAND_SIZE. Define a SCSI specific version of |
| INIT_REQUEST that can run with interrupts off. |
| |
| * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If |
| a removable device says ILLEGAL REQUEST to a door-locking command, |
| clear lockable flag. Add SCSI_IOCTL_GET_IDLUN ioctl. Do not attempt |
| to lock door for devices that do not have lockable semaphore set. |
| |
| * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST |
| instead of INIT_REQUEST. Allow sector sizes of 1024 and 256. For |
| removable disks that are not ready, mark them as having a media change |
| (some drives do not report this later). |
| |
| * seagate.c: Use volatile keyword for memory-mapped register pointers. |
| |
| * sr.c: Fix race condition, a la sd.c. Increase the number of retries |
| to 1. Use INIT_SCSI_REQUEST. Allow 512 byte sector sizes. Do a |
| read_capacity when we init the device so we know the size and |
| sectorsize. |
| |
| * st.c: If ioctl not found in st.c, try scsi_ioctl for others. |
| |
| * ultrastor.c: Do not truncate number of cylinders at 1024 for |
| biosparam call. |
| |
| * wd7000.c: Ditto. |
| Throughout: Use COMMAND_SIZE macro to determine length of scsi |
| command. |
| |
| |
| |
| Sat Mar 13 17:31:29 1993 |
| |
| * 0.99pl7 released. |
| |
| Throughout: Improve punctuation in some messages, and use new |
| verify_area syntax. |
| |
| * aha1542.c: Handle unexpected interrupts better. |
| |
| * scsi.c: Ditto. Handle reset conditions a bit better, asking for |
| sense information and retrying if required. |
| |
| * scsi_ioctl.c: Allow for 12 byte scsi commands. |
| |
| * ultrastor.c: Update to use scatter-gather. |
| |
| Sat Feb 20 17:57:15 1993 |
| |
| * 0.99pl6 released. |
| |
| * fdomain.c: Update to version 3.5. Handle spurious interrupts |
| better. |
| |
| * sd.c: Use register_blkdev function. |
| |
| * sr.c: Ditto. |
| |
| * st.c: Use register_chrdev function. |
| |
| * wd7000.c: Undo previous change. |
| |
| Sat Feb 6 11:20:43 1993 |
| |
| * 0.99pl5 released. |
| |
| * scsi.c: Fix bug in testing for UNIT_ATTENTION. |
| |
| * wd7000.c: Check at more addresses for bios. Fix bug in biosparam |
| (heads & sectors turned around). |
| |
| Wed Jan 20 18:13:59 1993 |
| |
| * 0.99pl4 released. |
| |
| * scsi.c: Ignore leading spaces when looking for blacklisted devices. |
| |
| * seagate.c: Add a few new signatures for FD cards. Another patch |
| with SCint to fix race condition. Use recursion_depth to keep track |
| of how many times we have been recursively called, and do not start |
| another command unless we are on the outer level. Fixes bug |
| with Syquest cartridge drives (used to crash kernel), because |
| they do not disconnect with large data transfers. |
| |
| Tue Jan 12 14:33:36 1993 |
| |
| * 0.99pl3 released. |
| |
| * fdomain.c: Update to version 3.3 (a few new signatures). |
| |
| * scsi.c: Add CDU-541, Denon DRD-25X to blacklist. |
| (allocate_request, request_queueable): Init request.waiting to NULL if |
| non-buffer type of request. |
| |
| * seagate.c: Allow controller to be overridden with CONTROLLER symbol. |
| Set SCint=NULL when we are done, to remove race condition. |
| |
| * st.c: Changes from Kai. |
| |
| Wed Dec 30 20:03:47 1992 |
| |
| * 0.99pl2 released. |
| |
| * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix |
| eliminates need for it here. |
| |
| * sd.c: Return ENODEV instead of EACCES if no such device available. |
| (sd_init) Init blkdev_fops earlier so that sd_open is available sooner. |
| |
| * sr.c: Same as above for sd.c. |
| |
| * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops |
| sooner, so that it is always there even if no tapes. |
| |
| * seagate.c (controller_type): New variable to keep track of ST0x or |
| FD. Modify signatures list to indicate controller type, and init |
| controller_type once we find a match. |
| |
| * wd7000.c (wd7000_set_sync): Remove redundant function. |
| |
| Sun Dec 20 16:26:24 1992 |
| |
| * 0.99pl1 released. |
| |
| * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against |
| NR_SCSI_DEVICES. |
| |
| * sr_ioctl.c: Verify that device exists before allowing an ioctl. |
| |
| * st.c: Patches from Kai - change timeout values, improve end of tape |
| handling. |
| |
| Sun Dec 13 18:15:23 1992 |
| |
| * 0.99 kernel released. Baseline for this ChangeLog. |