blob: 8b5a7a28a35b27060fc5ddcea0890d881f7d067c [file] [log] [blame]
mvebu armada 38x comphy driver
This comphy controller can be found on Marvell Armada 38x. It provides a
number of shared PHYs used by various interfaces (network, sata, usb,
Required properties:
- compatible: should be "marvell,armada-380-comphy"
- reg: should contain the comphy register location and length.
- #address-cells: should be 1.
- #size-cells: should be 0.
Optional properties:
- reg-names: must be "comphy" as the first name, and "conf".
- reg: must contain the comphy register location and length as the first
pair, followed by an optional configuration register address and
length pair.
A sub-node is required for each comphy lane provided by the comphy.
Required properties (child nodes):
- reg: comphy lane number.
- #phy-cells : from the generic phy bindings, must be 1. Defines the
input port to use for a given comphy lane.
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
reg-names = "comphy", "conf";
reg = <0x18300 0x100>, <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
cpm_comphy0: phy@0 {
reg = <0>;
#phy-cells = <1>;
cpm_comphy1: phy@1 {
reg = <1>;
#phy-cells = <1>;