mtd: rawnand: Deprecate ->erase()
The ->erase() hook have been overloaded by some drivers for bad reasons:
either the driver was not fitting in the NAND framework and should have
been an MTD driver (docg4), or the driver uses a specific path for the
ERASE operation (denali), instead of implementing it generically.
In any case, we should discourage people from overloading this method
and encourage them to implement ->exec_op() instead.
Move the ->erase() hook to the nand_legacy struct to make it clear.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index c14493e..8583580 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1275,7 +1275,7 @@
chip->ecc.write_page_raw = denali_write_page_raw;
chip->ecc.read_oob = denali_read_oob;
chip->ecc.write_oob = denali_write_oob;
- chip->erase = denali_erase;
+ chip->legacy.erase = denali_erase;
ret = denali_multidev_fixup(denali);
if (ret)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d71a3d3..57c89e2 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4730,7 +4730,11 @@
(page + pages_per_block))
chip->pagebuf = -1;
- status = chip->erase(chip, page & chip->pagemask);
+ if (chip->legacy.erase)
+ status = chip->legacy.erase(chip,
+ page & chip->pagemask);
+ else
+ status = single_erase(chip, page & chip->pagemask);
/* See if block erase succeeded */
if (status) {
@@ -5756,7 +5760,6 @@
chip->options |= NAND_ROW_ADDR_3;
chip->badblockbits = 8;
- chip->erase = single_erase;
/* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command)