commit f933d383df6b42e3262426d35593f18ff21aad57
author Abhishek Sahu <absahu@codeaurora.org> Wed Dec 13 19:55:32 2017 +0530
committer Stephen Boyd <sboyd@codeaurora.org> Thu Dec 21 16:03:19 2017 -0800
tree 2215a4f453fbc6e75c4966bdd807b91970c787b6
parent 23c68cc9683efbd08457f06fb5eacd7c8616dfae

clk: qcom: add read-only divider operations

Some of the divider settings are preconfigured and should not
be changed by the clock framework during frequency change. This
patch adds the read-only divider operation for QCOM dividers
which is equivalent to generic divider operations in
'commit 79c6ab509558 ("clk: divider: add CLK_DIVIDER_READ_ONLY flag")'.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/qcom/clk-regmap-divider.c

diff --git a/drivers/clk/qcom/clk-regmap-divider.c b/drivers/clk/qcom/clk-regmap-divider.c
index 5348491..6cf9005 100644
--- a/drivers/clk/qcom/clk-regmap-divider.c
+++ b/drivers/clk/qcom/clk-regmap-divider.c
@@ -23,6 +23,29 @@
 	return container_of(to_clk_regmap(hw), struct clk_regmap_div, clkr);
 }
 
+static long div_round_ro_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *prate)
+{
+	struct clk_regmap_div *divider = to_clk_regmap_div(hw);
+	struct clk_regmap *clkr = &divider->clkr;
+	u32 div;
+	struct clk_hw *hw_parent = clk_hw_get_parent(hw);
+
+	regmap_read(clkr->regmap, divider->reg, &div);
+	div >>= divider->shift;
+	div &= BIT(divider->width) - 1;
+	div += 1;
+
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
+		if (!hw_parent)
+			return -EINVAL;
+
+		*prate = clk_hw_round_rate(hw_parent, rate * div);
+	}
+
+	return DIV_ROUND_UP_ULL((u64)*prate, div);
+}
+
 static long div_round_rate(struct clk_hw *hw, unsigned long rate,
 			   unsigned long *prate)
 {
@@ -68,3 +91,9 @@
 	.recalc_rate = div_recalc_rate,
 };
 EXPORT_SYMBOL_GPL(clk_regmap_div_ops);
+
+const struct clk_ops clk_regmap_div_ro_ops = {
+	.round_rate = div_round_ro_rate,
+	.recalc_rate = div_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_div_ro_ops);