ethernet: Use octal not symbolic permissions
Prefer the direct use of octal for permissions.
Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.
Miscellanea:
o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 5e34b34..9ffc4a8 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -87,7 +87,7 @@
static int disable_msi = 0;
-module_param(disable_msi, int, S_IRUGO);
+module_param(disable_msi, int, 0444);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
typedef enum {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index b8388e9..fd97250 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -97,29 +97,29 @@
MODULE_FIRMWARE(FW_FILE_NAME_E2);
int bnx2x_num_queues;
-module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO);
+module_param_named(num_queues, bnx2x_num_queues, int, 0444);
MODULE_PARM_DESC(num_queues,
" Set number of queues (default is as a number of CPUs)");
static int disable_tpa;
-module_param(disable_tpa, int, S_IRUGO);
+module_param(disable_tpa, int, 0444);
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
static int int_mode;
-module_param(int_mode, int, S_IRUGO);
+module_param(int_mode, int, 0444);
MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
"(1 INT#x; 2 MSI)");
static int dropless_fc;
-module_param(dropless_fc, int, S_IRUGO);
+module_param(dropless_fc, int, 0444);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
static int mrrs = -1;
-module_param(mrrs, int, S_IRUGO);
+module_param(mrrs, int, 0444);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
static int debug;
-module_param(debug, int, S_IRUGO);
+module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, " Default debug msglevel");
static struct workqueue_struct *bnx2x_wq;
diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index ecdef42..ef4a0c32 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -63,24 +63,24 @@
/* 1 normal messages, 0 quiet .. 7 verbose. */
static int debug = 1;
-module_param(debug, int, S_IRUGO);
+module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "Debug messages");
#ifdef CONFIG_SBMAC_COALESCE
static int int_pktcnt_tx = 255;
-module_param(int_pktcnt_tx, int, S_IRUGO);
+module_param(int_pktcnt_tx, int, 0444);
MODULE_PARM_DESC(int_pktcnt_tx, "TX packet count");
static int int_timeout_tx = 255;
-module_param(int_timeout_tx, int, S_IRUGO);
+module_param(int_timeout_tx, int, 0444);
MODULE_PARM_DESC(int_timeout_tx, "TX timeout value");
static int int_pktcnt_rx = 64;
-module_param(int_pktcnt_rx, int, S_IRUGO);
+module_param(int_pktcnt_rx, int, 0444);
MODULE_PARM_DESC(int_pktcnt_rx, "RX packet count");
static int int_timeout_rx = 64;
-module_param(int_timeout_rx, int, S_IRUGO);
+module_param(int_timeout_rx, int, 0444);
MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
#endif
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index f259397..08bbb63 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -10799,11 +10799,11 @@
}
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tg3_show_temp, NULL,
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, tg3_show_temp, NULL,
TG3_TEMP_SENSOR_OFFSET);
-static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, tg3_show_temp, NULL,
+static SENSOR_DEVICE_ATTR(temp1_crit, 0444, tg3_show_temp, NULL,
TG3_TEMP_CAUTION_OFFSET);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, tg3_show_temp, NULL,
+static SENSOR_DEVICE_ATTR(temp1_max, 0444, tg3_show_temp, NULL,
TG3_TEMP_MAX_OFFSET);
static struct attribute *tg3_attrs[] = {