[media] v4l: vsp1: wpf: Add flipping support
Vertical flipping is available on both Gen2 and Gen3, while horizontal
flipping is only available on Gen3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c
index 9385bc7..3198316 100644
--- a/drivers/media/platform/vsp1/vsp1_wpf.c
+++ b/drivers/media/platform/vsp1/vsp1_wpf.c
@@ -37,6 +37,97 @@
}
/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+enum wpf_flip_ctrl {
+ WPF_CTRL_VFLIP = 0,
+ WPF_CTRL_HFLIP = 1,
+ WPF_CTRL_MAX,
+};
+
+static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct vsp1_rwpf *wpf =
+ container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
+ unsigned int i;
+ u32 flip = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_VFLIP:
+ for (i = 0; i < WPF_CTRL_MAX; ++i) {
+ if (wpf->flip.ctrls[i])
+ flip |= wpf->flip.ctrls[i]->val ? BIT(i) : 0;
+ }
+
+ spin_lock_irq(&wpf->flip.lock);
+ wpf->flip.pending = flip;
+ spin_unlock_irq(&wpf->flip.lock);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops vsp1_wpf_ctrl_ops = {
+ .s_ctrl = vsp1_wpf_s_ctrl,
+};
+
+static int wpf_init_controls(struct vsp1_rwpf *wpf)
+{
+ struct vsp1_device *vsp1 = wpf->entity.vsp1;
+ unsigned int num_flip_ctrls;
+
+ spin_lock_init(&wpf->flip.lock);
+
+ if (wpf->entity.index != 0) {
+ /* Only WPF0 supports flipping. */
+ num_flip_ctrls = 0;
+ } else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) {
+ /* When horizontal flip is supported the WPF implements two
+ * controls (horizontal flip and vertical flip).
+ */
+ num_flip_ctrls = 2;
+ } else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) {
+ /* When only vertical flip is supported the WPF implements a
+ * single control (vertical flip).
+ */
+ num_flip_ctrls = 1;
+ } else {
+ /* Otherwise flipping is not supported. */
+ num_flip_ctrls = 0;
+ }
+
+ vsp1_rwpf_init_ctrls(wpf, num_flip_ctrls);
+
+ if (num_flip_ctrls >= 1) {
+ wpf->flip.ctrls[WPF_CTRL_VFLIP] =
+ v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ }
+
+ if (num_flip_ctrls == 2) {
+ wpf->flip.ctrls[WPF_CTRL_HFLIP] =
+ v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+
+ v4l2_ctrl_cluster(2, wpf->flip.ctrls);
+ }
+
+ if (wpf->ctrls.error) {
+ dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n",
+ wpf->entity.index);
+ return wpf->ctrls.error;
+ }
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
* V4L2 Subdevice Core Operations
*/
@@ -85,10 +176,32 @@
static void wpf_set_memory(struct vsp1_entity *entity, struct vsp1_dl_list *dl)
{
struct vsp1_rwpf *wpf = entity_to_rwpf(entity);
+ const struct v4l2_pix_format_mplane *format = &wpf->format;
+ struct vsp1_rwpf_memory mem = wpf->mem;
+ unsigned int flip = wpf->flip.active;
+ unsigned int offset;
- vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, wpf->mem.addr[0]);
- vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, wpf->mem.addr[1]);
- vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, wpf->mem.addr[2]);
+ /* Update the memory offsets based on flipping configuration. The
+ * destination addresses point to the locations where the VSP starts
+ * writing to memory, which can be different corners of the image
+ * depending on vertical flipping. Horizontal flipping is handled
+ * through a line buffer and doesn't modify the start address.
+ */
+ if (flip & BIT(WPF_CTRL_VFLIP)) {
+ mem.addr[0] += (format->height - 1)
+ * format->plane_fmt[0].bytesperline;
+
+ if (format->num_planes > 1) {
+ offset = (format->height / wpf->fmtinfo->vsub - 1)
+ * format->plane_fmt[1].bytesperline;
+ mem.addr[1] += offset;
+ mem.addr[2] += offset;
+ }
+ }
+
+ vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]);
+ vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]);
+ vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]);
}
static void wpf_configure(struct vsp1_entity *entity,
@@ -105,8 +218,22 @@
u32 srcrpf = 0;
if (!full) {
- vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, wpf->outfmt |
- (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT));
+ const unsigned int mask = BIT(WPF_CTRL_VFLIP)
+ | BIT(WPF_CTRL_HFLIP);
+
+ spin_lock(&wpf->flip.lock);
+ wpf->flip.active = (wpf->flip.active & ~mask)
+ | (wpf->flip.pending & mask);
+ spin_unlock(&wpf->flip.lock);
+
+ outfmt = (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT) | wpf->outfmt;
+
+ if (wpf->flip.active & BIT(WPF_CTRL_VFLIP))
+ outfmt |= VI6_WPF_OUTFMT_FLP;
+ if (wpf->flip.active & BIT(WPF_CTRL_HFLIP))
+ outfmt |= VI6_WPF_OUTFMT_HFLP;
+
+ vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt);
return;
}
@@ -149,6 +276,12 @@
format->plane_fmt[1].bytesperline);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap);
+
+ if (vsp1->info->features & VSP1_HAS_WPF_HFLIP &&
+ wpf->entity.index == 0)
+ vsp1_wpf_write(wpf, dl, VI6_WPF_ROT_CTRL,
+ VI6_WPF_ROT_CTRL_LN16 |
+ (256 << VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT));
}
if (sink_format->code != source_format->code)
@@ -234,7 +367,7 @@
}
/* Initialize the control handler. */
- ret = vsp1_rwpf_init_ctrls(wpf);
+ ret = wpf_init_controls(wpf);
if (ret < 0) {
dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n",
index);