ASoC: rt5651: Only configure LDO voltage once at boot
Now that rt5651_set_bias_level(BIAS_OFF) no longer modifies the LDO
voltage selection bits, there is no need to set them each time we move
to standby. Instead configure them once at component-probe() time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 74f83af..9460bdc 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -1540,9 +1540,6 @@
snd_soc_component_update_bits(component, RT5651_PWR_ANLG1,
RT5651_PWR_FV1 | RT5651_PWR_FV2,
RT5651_PWR_FV1 | RT5651_PWR_FV2);
- snd_soc_component_update_bits(component, RT5651_PWR_ANLG1,
- RT5651_PWR_LDO_DVO_MASK,
- RT5651_PWR_LDO_DVO_1_2V);
snd_soc_component_update_bits(component, RT5651_D_MISC, 0x1, 0x1);
}
break;
@@ -1662,6 +1659,9 @@
rt5651->component = component;
+ snd_soc_component_update_bits(component, RT5651_PWR_ANLG1,
+ RT5651_PWR_LDO_DVO_MASK, RT5651_PWR_LDO_DVO_1_2V);
+
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
rt5651_apply_properties(component);