[media] v4l: vsp1: Add Cubic Look Up Table (CLU) support
The CLU processing block is a 2D/3D lookup table that converts the input
three color component data into desired three color components using a
lookup table.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/platform/vsp1/vsp1_clu.c b/drivers/media/platform/vsp1/vsp1_clu.c
new file mode 100644
index 0000000..cea86e7
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_clu.c
@@ -0,0 +1,278 @@
+/*
+ * vsp1_clu.c -- R-Car VSP1 Cubic Look-Up Table
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_clu.h"
+#include "vsp1_dl.h"
+
+#define CLU_MIN_SIZE 4U
+#define CLU_MAX_SIZE 8190U
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline void vsp1_clu_write(struct vsp1_clu *clu, struct vsp1_dl_list *dl,
+ u32 reg, u32 data)
+{
+ vsp1_dl_list_write(dl, reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+#define V4L2_CID_VSP1_CLU_TABLE (V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_VSP1_CLU_MODE (V4L2_CID_USER_BASE | 0x1002)
+#define V4L2_CID_VSP1_CLU_MODE_2D 0
+#define V4L2_CID_VSP1_CLU_MODE_3D 1
+
+static int clu_set_table(struct vsp1_clu *clu, struct v4l2_ctrl *ctrl)
+{
+ struct vsp1_dl_body *dlb;
+ unsigned int i;
+
+ dlb = vsp1_dl_fragment_alloc(clu->entity.vsp1, 1 + 17 * 17 * 17);
+ if (!dlb)
+ return -ENOMEM;
+
+ vsp1_dl_fragment_write(dlb, VI6_CLU_ADDR, 0);
+ for (i = 0; i < 17 * 17 * 17; ++i)
+ vsp1_dl_fragment_write(dlb, VI6_CLU_DATA, ctrl->p_new.p_u32[i]);
+
+ swap(clu->clu, dlb);
+
+ vsp1_dl_fragment_free(dlb);
+ return 0;
+}
+
+static int clu_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct vsp1_clu *clu =
+ container_of(ctrl->handler, struct vsp1_clu, ctrls);
+
+ switch (ctrl->id) {
+ case V4L2_CID_VSP1_CLU_TABLE:
+ clu_set_table(clu, ctrl);
+ break;
+
+ case V4L2_CID_VSP1_CLU_MODE:
+ clu->mode = ctrl->val;
+ break;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops clu_ctrl_ops = {
+ .s_ctrl = clu_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config clu_table_control = {
+ .ops = &clu_ctrl_ops,
+ .id = V4L2_CID_VSP1_CLU_TABLE,
+ .name = "Look-Up Table",
+ .type = V4L2_CTRL_TYPE_U32,
+ .min = 0x00000000,
+ .max = 0x00ffffff,
+ .step = 1,
+ .def = 0,
+ .dims = { 17, 17, 17 },
+};
+
+static const char * const clu_mode_menu[] = {
+ "2D",
+ "3D",
+ NULL,
+};
+
+static const struct v4l2_ctrl_config clu_mode_control = {
+ .ops = &clu_ctrl_ops,
+ .id = V4L2_CID_VSP1_CLU_MODE,
+ .name = "Mode",
+ .type = V4L2_CTRL_TYPE_MENU,
+ .min = 0,
+ .max = 1,
+ .def = 1,
+ .qmenu = clu_mode_menu,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Pad Operations
+ */
+
+static int clu_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ static const unsigned int codes[] = {
+ MEDIA_BUS_FMT_ARGB8888_1X32,
+ MEDIA_BUS_FMT_AHSV8888_1X32,
+ MEDIA_BUS_FMT_AYUV8_1X32,
+ };
+
+ return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes,
+ ARRAY_SIZE(codes));
+}
+
+static int clu_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ return vsp1_subdev_enum_frame_size(subdev, cfg, fse, CLU_MIN_SIZE,
+ CLU_MIN_SIZE, CLU_MAX_SIZE,
+ CLU_MAX_SIZE);
+}
+
+static int clu_set_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vsp1_clu *clu = to_clu(subdev);
+ struct v4l2_subdev_pad_config *config;
+ struct v4l2_mbus_framefmt *format;
+
+ config = vsp1_entity_get_pad_config(&clu->entity, cfg, fmt->which);
+ if (!config)
+ return -EINVAL;
+
+ /* Default to YUV if the requested format is not supported. */
+ if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
+ fmt->format.code != MEDIA_BUS_FMT_AHSV8888_1X32 &&
+ fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
+ fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
+
+ format = vsp1_entity_get_pad_format(&clu->entity, config, fmt->pad);
+
+ if (fmt->pad == CLU_PAD_SOURCE) {
+ /* The CLU output format can't be modified. */
+ fmt->format = *format;
+ return 0;
+ }
+
+ format->code = fmt->format.code;
+ format->width = clamp_t(unsigned int, fmt->format.width,
+ CLU_MIN_SIZE, CLU_MAX_SIZE);
+ format->height = clamp_t(unsigned int, fmt->format.height,
+ CLU_MIN_SIZE, CLU_MAX_SIZE);
+ format->field = V4L2_FIELD_NONE;
+ format->colorspace = V4L2_COLORSPACE_SRGB;
+
+ fmt->format = *format;
+
+ /* Propagate the format to the source pad. */
+ format = vsp1_entity_get_pad_format(&clu->entity, config,
+ CLU_PAD_SOURCE);
+ *format = fmt->format;
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static const struct v4l2_subdev_pad_ops clu_pad_ops = {
+ .init_cfg = vsp1_entity_init_cfg,
+ .enum_mbus_code = clu_enum_mbus_code,
+ .enum_frame_size = clu_enum_frame_size,
+ .get_fmt = vsp1_subdev_get_pad_format,
+ .set_fmt = clu_set_format,
+};
+
+static const struct v4l2_subdev_ops clu_ops = {
+ .pad = &clu_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void clu_configure(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe,
+ struct vsp1_dl_list *dl)
+{
+ struct vsp1_clu *clu = to_clu(&entity->subdev);
+ struct v4l2_mbus_framefmt *format;
+ u32 ctrl = VI6_CLU_CTRL_AAI | VI6_CLU_CTRL_MVS | VI6_CLU_CTRL_EN;
+
+ format = vsp1_entity_get_pad_format(&clu->entity, clu->entity.config,
+ CLU_PAD_SINK);
+
+ mutex_lock(clu->ctrls.lock);
+
+ /* 2D mode can only be used with the YCbCr pixel encoding. */
+ if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D &&
+ format->code == MEDIA_BUS_FMT_AYUV8_1X32)
+ ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D
+ | VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D
+ | VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D;
+
+ if (clu->clu) {
+ vsp1_dl_list_add_fragment(dl, clu->clu);
+ clu->clu = NULL;
+ }
+
+ mutex_unlock(clu->ctrls.lock);
+
+ vsp1_clu_write(clu, dl, VI6_CLU_CTRL, ctrl);
+}
+
+static const struct vsp1_entity_operations clu_entity_ops = {
+ .configure = clu_configure,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_clu *vsp1_clu_create(struct vsp1_device *vsp1)
+{
+ struct vsp1_clu *clu;
+ int ret;
+
+ clu = devm_kzalloc(vsp1->dev, sizeof(*clu), GFP_KERNEL);
+ if (clu == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ clu->entity.ops = &clu_entity_ops;
+ clu->entity.type = VSP1_ENTITY_CLU;
+
+ ret = vsp1_entity_init(vsp1, &clu->entity, "clu", 2, &clu_ops,
+ MEDIA_ENT_F_PROC_VIDEO_LUT);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ /* Initialize the control handler. */
+ v4l2_ctrl_handler_init(&clu->ctrls, 2);
+ v4l2_ctrl_new_custom(&clu->ctrls, &clu_table_control, NULL);
+ v4l2_ctrl_new_custom(&clu->ctrls, &clu_mode_control, NULL);
+
+ clu->entity.subdev.ctrl_handler = &clu->ctrls;
+
+ if (clu->ctrls.error) {
+ dev_err(vsp1->dev, "clu: failed to initialize controls\n");
+ ret = clu->ctrls.error;
+ vsp1_entity_destroy(&clu->entity);
+ return ERR_PTR(ret);
+ }
+
+ v4l2_ctrl_handler_setup(&clu->ctrls);
+
+ return clu;
+}