Paul Mundt | 02bf6cc | 2010-01-14 20:58:58 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Renesas Technology Europe SDK7786 Support. |
| 3 | * |
| 4 | * Copyright (C) 2010 Matt Fleming |
| 5 | * Copyright (C) 2010 Paul Mundt |
| 6 | * |
| 7 | * This file is subject to the terms and conditions of the GNU General Public |
| 8 | * License. See the file "COPYING" in the main directory of this archive |
| 9 | * for more details. |
| 10 | */ |
| 11 | #include <linux/init.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/smsc911x.h> |
| 15 | #include <linux/i2c.h> |
| 16 | #include <linux/irq.h> |
| 17 | #include <asm/machvec.h> |
| 18 | #include <asm/sizes.h> |
| 19 | |
| 20 | static struct resource smsc911x_resources[] = { |
| 21 | [0] = { |
| 22 | .name = "smsc911x-memory", |
| 23 | .start = 0x07ffff00, |
| 24 | .end = 0x07ffff00 + SZ_256 - 1, |
| 25 | .flags = IORESOURCE_MEM, |
| 26 | }, |
| 27 | [1] = { |
| 28 | .name = "smsc911x-irq", |
| 29 | .start = evt2irq(0x2c0), |
| 30 | .end = evt2irq(0x2c0), |
| 31 | .flags = IORESOURCE_IRQ, |
| 32 | }, |
| 33 | }; |
| 34 | |
| 35 | static struct smsc911x_platform_config smsc911x_config = { |
| 36 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| 37 | .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, |
| 38 | .flags = SMSC911X_USE_32BIT, |
| 39 | .phy_interface = PHY_INTERFACE_MODE_MII, |
| 40 | }; |
| 41 | |
| 42 | static struct platform_device smsc911x_device = { |
| 43 | .name = "smsc911x", |
| 44 | .id = -1, |
| 45 | .num_resources = ARRAY_SIZE(smsc911x_resources), |
| 46 | .resource = smsc911x_resources, |
| 47 | .dev = { |
| 48 | .platform_data = &smsc911x_config, |
| 49 | }, |
| 50 | }; |
| 51 | |
| 52 | static struct resource smbus_fpga_resource = { |
| 53 | .start = 0x07fff9e0, |
| 54 | .end = 0x07fff9e0 + SZ_32 - 1, |
| 55 | .flags = IORESOURCE_MEM, |
| 56 | }; |
| 57 | |
| 58 | static struct platform_device smbus_fpga_device = { |
| 59 | .name = "i2c-sdk7786", |
| 60 | .id = 0, |
| 61 | .num_resources = 1, |
| 62 | .resource = &smbus_fpga_resource, |
| 63 | }; |
| 64 | |
| 65 | static struct resource smbus_pcie_resource = { |
| 66 | .start = 0x07fffc30, |
| 67 | .end = 0x07fffc30 + SZ_32 - 1, |
| 68 | .flags = IORESOURCE_MEM, |
| 69 | }; |
| 70 | |
| 71 | static struct platform_device smbus_pcie_device = { |
| 72 | .name = "i2c-sdk7786", |
| 73 | .id = 1, |
| 74 | .num_resources = 1, |
| 75 | .resource = &smbus_pcie_resource, |
| 76 | }; |
| 77 | |
| 78 | static struct i2c_board_info __initdata sdk7786_i2c_devices[] = { |
| 79 | { |
| 80 | I2C_BOARD_INFO("max6900", 0x68), |
| 81 | }, |
| 82 | }; |
| 83 | |
| 84 | static struct platform_device *sh7786_devices[] __initdata = { |
| 85 | &smsc911x_device, |
| 86 | &smbus_fpga_device, |
| 87 | &smbus_pcie_device, |
| 88 | }; |
| 89 | |
| 90 | #define SBCR_REGS_BASE 0x07fff990 |
| 91 | |
| 92 | #define SCBR_I2CMEN (1 << 0) /* FPGA I2C master enable */ |
| 93 | #define SCBR_I2CCEN (1 << 1) /* CPU I2C master enable */ |
| 94 | |
| 95 | static int sdk7786_i2c_setup(void) |
| 96 | { |
| 97 | void __iomem *sbcr; |
| 98 | unsigned int tmp; |
| 99 | |
| 100 | sbcr = ioremap_nocache(SBCR_REGS_BASE, SZ_16); |
| 101 | |
| 102 | /* |
| 103 | * Hand over I2C control to the FPGA. |
| 104 | */ |
| 105 | tmp = ioread16(sbcr); |
| 106 | tmp &= ~SCBR_I2CCEN; |
| 107 | tmp |= SCBR_I2CMEN; |
| 108 | iowrite16(tmp, sbcr); |
| 109 | |
| 110 | iounmap(sbcr); |
| 111 | |
| 112 | return i2c_register_board_info(0, sdk7786_i2c_devices, |
| 113 | ARRAY_SIZE(sdk7786_i2c_devices)); |
| 114 | } |
| 115 | |
| 116 | static int __init sdk7786_devices_setup(void) |
| 117 | { |
| 118 | int ret; |
| 119 | |
| 120 | ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); |
| 121 | if (unlikely(ret != 0)) |
| 122 | return ret; |
| 123 | |
| 124 | return sdk7786_i2c_setup(); |
| 125 | } |
| 126 | __initcall(sdk7786_devices_setup); |
| 127 | |
| 128 | #define FPGA_REGS_BASE 0x07fff800 |
| 129 | #define FPGA_REGS_SIZE 1152 |
| 130 | |
| 131 | #define INTASR 0x010 |
| 132 | #define INTAMR 0x020 |
| 133 | #define INTBSR 0x090 |
| 134 | #define INTBMR 0x0a0 |
| 135 | #define INTMSR 0x130 |
| 136 | |
| 137 | #define IASELR1 0x210 |
| 138 | #define IASELR2 0x220 |
| 139 | #define IASELR3 0x230 |
| 140 | #define IASELR4 0x240 |
| 141 | #define IASELR5 0x250 |
| 142 | #define IASELR6 0x260 |
| 143 | #define IASELR7 0x270 |
| 144 | #define IASELR8 0x280 |
| 145 | #define IASELR9 0x290 |
| 146 | #define IASELR10 0x2a0 |
| 147 | #define IASELR11 0x2b0 |
| 148 | #define IASELR12 0x2c0 |
| 149 | #define IASELR13 0x2d0 |
| 150 | #define IASELR14 0x2e0 |
| 151 | #define IASELR15 0x2f0 |
| 152 | |
| 153 | static void __iomem *fpga_regs; |
| 154 | |
| 155 | static u16 fpga_read_reg(unsigned int reg) |
| 156 | { |
| 157 | return __raw_readw(fpga_regs + reg); |
| 158 | } |
| 159 | |
| 160 | static void fpga_write_reg(u16 val, unsigned int reg) |
| 161 | { |
| 162 | __raw_writew(val, fpga_regs + reg); |
| 163 | } |
| 164 | |
| 165 | enum { |
| 166 | ATA_IRQ_BIT = 1, |
| 167 | SPI_BUSY_BIT = 2, |
| 168 | LIRQ5_BIT = 3, |
| 169 | LIRQ6_BIT = 4, |
| 170 | LIRQ7_BIT = 5, |
| 171 | LIRQ8_BIT = 6, |
| 172 | KEY_IRQ_BIT = 7, |
| 173 | PEN_IRQ_BIT = 8, |
| 174 | ETH_IRQ_BIT = 9, |
| 175 | RTC_ALARM_BIT = 10, |
| 176 | CRYSTAL_FAIL_BIT = 12, |
| 177 | ETH_PME_BIT = 14, |
| 178 | }; |
| 179 | |
| 180 | static void __init init_sdk7786_IRQ(void) |
| 181 | { |
| 182 | unsigned int tmp; |
| 183 | |
| 184 | fpga_regs = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE); |
| 185 | if (!fpga_regs) { |
| 186 | printk(KERN_ERR "Couldn't map FPGA registers\n"); |
| 187 | return; |
| 188 | } |
| 189 | |
| 190 | /* Enable priority encoding for all IRLs */ |
| 191 | fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); |
| 192 | |
| 193 | /* Clear FPGA interrupt status registers */ |
| 194 | fpga_write_reg(0x0000, INTASR); |
| 195 | fpga_write_reg(0x0000, INTBSR); |
| 196 | |
| 197 | /* Unmask FPGA interrupts */ |
| 198 | tmp = fpga_read_reg(INTAMR); |
| 199 | tmp &= ~(1 << ETH_IRQ_BIT); |
| 200 | fpga_write_reg(tmp, INTAMR); |
| 201 | |
| 202 | plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); |
| 203 | plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); |
| 204 | } |
| 205 | |
| 206 | /* Initialize the board */ |
| 207 | static void __init sdk7786_setup(char **cmdline_p) |
| 208 | { |
| 209 | printk(KERN_INFO "Renesas Technology Corp. SDK7786 support.\n"); |
| 210 | } |
| 211 | |
| 212 | /* |
| 213 | * The Machine Vector |
| 214 | */ |
| 215 | static struct sh_machine_vector mv_sdk7786 __initmv = { |
| 216 | .mv_name = "SDK7786", |
| 217 | .mv_setup = sdk7786_setup, |
| 218 | .mv_init_irq = init_sdk7786_IRQ, |
| 219 | }; |