ath5k: fix formatting errors found by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 4e982b6..7e28676 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -173,7 +173,7 @@
data = ath5k_hw_bitswap(val, num_bits);
for (bits_shifted = 0, bits_left = num_bits; bits_left > 0;
- position = 0, entry++) {
+ position = 0, entry++) {
last_bit = (position + bits_left > 8) ? 8 :
position + bits_left;
@@ -472,7 +472,7 @@
level[0] = 0;
level[1] = (step == 63) ? 50 : step + 4;
level[2] = (step != 63) ? 64 : level[0];
- level[3] = level[2] + 50 ;
+ level[3] = level[2] + 50;
ah->ah_gain.g_high = level[3] -
(step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
@@ -549,7 +549,7 @@
for (ah->ah_gain.g_target = ah->ah_gain.g_current;
ah->ah_gain.g_target <= ah->ah_gain.g_low &&
- ah->ah_gain.g_step_idx < go->go_steps_count-1;
+ ah->ah_gain.g_step_idx < go->go_steps_count - 1;
g_step = &go->go_step[ah->ah_gain.g_step_idx])
ah->ah_gain.g_target -= 2 *
(go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
@@ -614,7 +614,7 @@
ath5k_hw_rf_gainf_corr(ah);
ah->ah_gain.g_current =
ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
- (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
+ (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) :
0;
}
@@ -1331,7 +1331,7 @@
static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
{
struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
- hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1);
+ hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1);
hist->nfval[hist->index] = noise_floor;
}
@@ -1344,10 +1344,10 @@
memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
- if (sort[j] > sort[j-1]) {
+ if (sort[j] > sort[j - 1]) {
tmp = sort[j];
- sort[j] = sort[j-1];
- sort[j-1] = tmp;
+ sort[j] = sort[j - 1];
+ sort[j - 1] = tmp;
}
}
}
@@ -1355,7 +1355,7 @@
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
"cal %d:%d\n", i, sort[i]);
}
- return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2];
+ return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2];
}
/*
@@ -2080,7 +2080,7 @@
* always 1 instead of 1.25, 1.75 etc). We scale up by 100
* to have some accuracy both for 0.5 and 0.25 steps.
*/
- ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left));
+ ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left));
/* Now scale down to be in range */
result = y_left + (ratio * (target - x_left) / 100);
@@ -2159,7 +2159,7 @@
u8 *vpd_table, u8 type)
{
u8 idx[2] = { 0, 1 };
- s16 pwr_i = 2*pmin;
+ s16 pwr_i = 2 * pmin;
int i;
if (num_points < 2)
@@ -2437,7 +2437,7 @@
}
if (edge_pwr)
- ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr);
+ ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr);
}
@@ -2475,8 +2475,8 @@
/* Copy values from pcdac_tmp */
pwr_idx = min_pwr;
- for (i = 0 ; pwr_idx <= max_pwr &&
- pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+ for (i = 0; pwr_idx <= max_pwr &&
+ pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
pcdac_out[pcdac_i++] = pcdac_tmp[i];
pwr_idx++;
}
@@ -2552,7 +2552,7 @@
}
/* This is used when setting tx power*/
- ah->ah_txpower.txp_min_idx = min_pwr_idx/2;
+ ah->ah_txpower.txp_min_idx = min_pwr_idx / 2;
/* Fill Power to PCDAC table backwards */
pwr = max_pwr_idx;
@@ -2561,10 +2561,10 @@
* edge flag and set pcdac_tmp to lower
* power curve.*/
if (edge_flag == 0x40 &&
- (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+ (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
edge_flag = 0x00;
pcdac_tmp = pcdac_low_pwr;
- pwr = mid_pwr_idx/2;
+ pwr = mid_pwr_idx / 2;
}
/* Don't go below 1, extrapolate below if we have
@@ -2604,8 +2604,8 @@
*/
for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
ath5k_hw_reg_write(ah,
- (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) |
- (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16),
+ (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) |
+ (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16),
AR5K_PHY_PCDAC_TXPOWER(i));
}
}
@@ -2789,10 +2789,10 @@
*/
for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
ath5k_hw_reg_write(ah,
- ((pdadc_out[4*i + 0] & 0xff) << 0) |
- ((pdadc_out[4*i + 1] & 0xff) << 8) |
- ((pdadc_out[4*i + 2] & 0xff) << 16) |
- ((pdadc_out[4*i + 3] & 0xff) << 24),
+ ((pdadc_out[4 * i + 0] & 0xff) << 0) |
+ ((pdadc_out[4 * i + 1] & 0xff) << 8) |
+ ((pdadc_out[4 * i + 2] & 0xff) << 16) |
+ ((pdadc_out[4 * i + 3] & 0xff) << 24),
AR5K_PHY_PDADC_TXPOWER(i));
}
}