# Copyright (c) 2012-2013, NVIDIA CORPORATION.  All rights reserved.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

if ARCH_TEGRA

comment "NVIDIA Tegra options"

config ARCH_TEGRA_2x_SOC
	bool "Enable support for Tegra20 family"
	depends on !ARCH_TEGRA_3x_SOC
	depends on !ARCH_TEGRA_11x_SOC
	select ARM_CPU_SUSPEND if PM
	select ARCH_TEGRA_HAS_ARM_SCU
	select ARCH_TEGRA_HAS_PCIE
	select CPU_V7
	select ARM_GIC
	select ARM_SAVE_DEBUG_CONTEXT if PM_SLEEP
	select ARCH_REQUIRE_GPIOLIB
	select PINCTRL
	select PINCTRL_TEGRA20
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_ULPI if USB
	select USB_ULPI_VIEWPORT if USB_SUPPORT
	select ARM_ERRATA_720789
	select ARM_ERRATA_751472
	select ARM_ERRATA_754327
	select ARM_ERRATA_764369
	select ARM_ERRATA_742230 if SMP
	select PL310_ERRATA_769419 if CACHE_L2X0
	select CPU_FREQ_TABLE if CPU_FREQ
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_ULPI if USB_SUPPORT
	select USB_ULPI_VIEWPORT if USB_SUPPORT
	select ARCH_SUPPORTS_MSI if TEGRA_PCI
	select PCI_MSI if TEGRA_PCI
	select CPA
	select ARM_ERRATA_716044
	select NVMAP_CACHE_MAINT_BY_SET_WAYS
	select NVMAP_OUTER_CACHE_MAINT_BY_SET_WAYS
	select NVMAP_DEFERRED_CACHE_MAINT
	select SOC_BUS
	help
	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

config ARCH_TEGRA_3x_SOC
	bool "Enable support for Tegra30 family"
	depends on !ARCH_TEGRA_11x_SOC
	select ARM_CPU_SUSPEND if PM
	depends on !ARCH_TEGRA_11x_SOC
	select ARCH_TEGRA_HAS_ARM_SCU
	select ARCH_TEGRA_HAS_PCIE
	select ARCH_TEGRA_HAS_SATA
	select ARCH_TEGRA_HAS_DUAL_3D
	select ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	select CPU_V7
	select ARM_GIC
	select ARM_SAVE_DEBUG_CONTEXT if PM_SLEEP
	select GIC_SET_MULTIPLE_CPUS if SMP
	select ARCH_REQUIRE_GPIOLIB
	select PINCTRL
	select PINCTRL_TEGRA30
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_ULPI if USB
	select USB_ULPI_VIEWPORT if USB_SUPPORT
	select REPORT_PRESENT_CPUS if TEGRA_AUTO_HOTPLUG
	select ARCH_SUPPORTS_MSI if TEGRA_PCI
	select PCI_MSI if TEGRA_PCI
	select ARM_ERRATA_743622
	select ARM_ERRATA_751472
	select ARM_ERRATA_754322
	select ARM_ERRATA_764369
	select PL310_ERRATA_769419 if CACHE_L2X0
	select CPU_FREQ_TABLE if CPU_FREQ
	select TEGRA_LP2_CPU_TIMER if HAVE_ARM_TWD && !TEGRA_RAIL_OFF_MULTIPLE_CPUS
	select CPA
	select NVMAP_CACHE_MAINT_BY_SET_WAYS
	select NVMAP_OUTER_CACHE_MAINT_BY_SET_WAYS
	select NVMAP_DEFERRED_CACHE_MAINT
	select PL310_ERRATA_727915
	select TEGRA_LATENCY_ALLOWANCE if !TEGRA_FPGA_PLATFORM
	select TEGRA_LATENCY_ALLOWANCE_SCALING if !TEGRA_FPGA_PLATFORM
	select SOC_BUS
	help
	  Support for NVIDIA Tegra T30 processor family, based on the
	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

config ARCH_TEGRA_11x_SOC
	bool "Tegra 11x family SOC"
	select ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	select CPU_V7
	select ARM_L1_CACHE_SHIFT_6
	select ARM_ARCH_TIMER
	select ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	select ARM_CPU_SUSPEND if PM
	select ARM_GIC
	select ARCH_REQUIRE_GPIOLIB
	select ARM_SAVE_DEBUG_CONTEXT if PM_SLEEP
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_EHCI_TEGRA if USB_SUPPORT
	select USB_ULPI if USB_SUPPORT
	select USB_ULPI_VIEWPORT if USB_SUPPORT
	select REPORT_PRESENT_CPUS if TEGRA_AUTO_HOTPLUG
	select TEGRA_LP2_CPU_TIMER if !TEGRA_RAIL_OFF_MULTIPLE_CPUS
	select CPA
	select NVMAP_CACHE_MAINT_BY_SET_WAYS
	select NVMAP_DEFERRED_CACHE_MAINT
	select ARCH_TEGRA_HAS_CL_DVFS
	select TEGRA_DUAL_CBUS
	select ARCH_TEGRA_4GB_MEMORY
	select TEGRA_LATENCY_ALLOWANCE if !TEGRA_FPGA_PLATFORM
	select TEGRA_MC_PTSA if !TEGRA_FPGA_PLATFORM
	select SOC_BUS
	select PINCTRL
	select TEGRA_ISOMGR
	select TEGRA_ISOMGR_SYSFS
	select TEGRA_ISOMGR_DEBUG
	select TEGRA_ERRATA_1157520
	select TEGRA_CORE_EDP_LIMITS
	select TEGRA_THERMAL_THROTTLE_EXACT_FREQ
	select ARM_ERRATA_799270
	select ARM_ERRATA_798181
	help
	  Support for NVIDIA Tegra 11x family of SoCs, based upon the
	  ARM Cortex-A15MP CPU

config ARCH_TEGRA_HAS_ARM_SCU
	bool

config ARCH_TEGRA_HAS_DUAL_3D
	bool

config ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	bool

config ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	bool

config ARCH_TEGRA_HAS_PCIE
	bool

config ARCH_TEGRA_HAS_SATA
	bool

config ARCH_TEGRA_HAS_CL_DVFS
	bool

config TEGRA_PCI
	bool "PCIe host controller driver"
	select PCI
	depends on ARCH_TEGRA_HAS_PCIE
	help
	  Adds PCIe Host controller driver for tegra based systems

config TEGRA_IRDA
	bool "IRDA on UARTB Port of Verbier"
	select IRDA_CPLD
	depends on ARCH_TEGRA_3x_SOC && MACH_CARDHU
	help
	  Adds support for Vishay IrDA transceiver at UARTB port
	  of Verbier Boards(E1186 and E1198) with no ULPI rework done.

comment "Tegra board type"

config MACH_HARMONY
       bool "Harmony board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       help
         Support for NVIDIA Harmony development platform

config MACH_VENTANA
       bool "Ventana board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       help
         Support for NVIDIA Ventana development platform

config MACH_KAEN
       bool "Kaen board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_SEABOARD
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       help
         Support for the Kaen version of Seaboard

config MACH_PAZ00
       bool "Paz00 board"
       depends on ARCH_TEGRA_2x_SOC
       help
         Support for the Toshiba AC100/Dynabook AZ netbook

config MACH_SEABOARD
       bool "Seaboard board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       help
         Support for nVidia Seaboard development platform. It will
	 also be included for some of the derivative boards that
	 have large similarities with the seaboard design.

config MACH_TEGRA_DT
	bool "Generic Tegra20 board (FDT support)"
	depends on ARCH_TEGRA_2x_SOC
	select USE_OF
	help
	  Support for generic NVIDIA Tegra20 boards using Flattened Device Tree

config MACH_TRIMSLICE
       bool "TrimSlice board"
       depends on ARCH_TEGRA_2x_SOC
       select TEGRA_PCI
       help
         Support for CompuLab TrimSlice platform

config MACH_WARIO
       bool "Wario board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_SEABOARD
       help
         Support for the Wario version of Seaboard

config MACH_VENTANA
       bool "Ventana board"
       depends on ARCH_TEGRA_2x_SOC
       help
         Support for the nVidia Ventana development platform

config MACH_WHISTLER
       bool "Whistler board"
       depends on ARCH_TEGRA_2x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8753 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X if SND_SOC
       help
         Support for NVIDIA Whistler development platform

config MACH_ARUBA
       bool "Aruba board"
       depends on ARCH_TEGRA_3x_SOC
       select TEGRA_FPGA_PLATFORM
       help
         Support for NVIDIA Aruba2 FPGA development platform

config MACH_CURACAO
       bool "Curacao board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       select TEGRA_FPGA_PLATFORM
       help
         Support for NVIDIA Curacao FPGA development platform

config MACH_CARDHU
       bool "Cardhu board"
       depends on ARCH_TEGRA_3x_SOC
       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_MAX98095 if SND_SOC
       help
         Support for NVIDIA Cardhu development platform

config MACH_P1852
       bool "P1852 board"
       depends on ARCH_TEGRA_3x_SOC
       help
         Support for NVIDIA P1852 development platform

config MACH_E1853
       bool "E1853 board"
       depends on ARCH_TEGRA_3x_SOC
       help
         Support for NVIDIA E1853 development platform

config MACH_TEGRA_ENTERPRISE
       bool "Enterprise board"
       depends on ARCH_TEGRA_3x_SOC
       select MACH_HAS_SND_SOC_TEGRA_MAX98088 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X if SND_SOC
       select TEGRA_SLOW_CSITE
       help
         Support for NVIDIA Enterprise development platform

config MACH_TAI
       bool "Tai board"
       depends on MACH_TEGRA_ENTERPRISE
       help
         Support for NVIDIA Tai development platform

config MACH_KAI
       bool "Kai board"
       depends on ARCH_TEGRA_3x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5640 if SND_SOC
       help
         Support for NVIDIA KAI development platform

config MACH_DALMORE
       bool "Dalmore board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5640 if SND_SOC
       help
         Support for NVIDIA DALMORE development platform

config MACH_MACALLAN
       bool "Macallan board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5640 if SND_SOC
       help
         Support for NVIDIA MACALLAN development platform

config MACH_TEGRA_PLUTO
       bool "Pluto board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_CS42L73 if SND_SOC
       select EDP_FRAMEWORK
       select MACH_HAS_SND_SOC_TEGRA_TLV320AIC326X if SND_SOC
       help
         Support for NVIDIA PLUTO development platform

config MACH_ROTH
       bool "Thor board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5640 if SND_SOC
       help
         Support for NVIDIA THOR development platform

config MACH_TEGRATAB
       bool "Tegratab board"
       depends on ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5640 if SND_SOC
       help
         Support for NVIDIA TEGRATAB development platform

choice
       prompt "Tegra platform type"
       default TEGRA_SILICON_PLATFORM

config TEGRA_SILICON_PLATFORM
        bool "Silicon"
        help
          This enables support for a Tegra silicon platform.

config TEGRA_SIMULATION_PLATFORM
        bool "Simulation"
	select LESS_GCC_OPT if DEBUG_KERNEL
        help
          This enables support for a Tegra simulation platform.
          Select this only if you are an NVIDIA developer working
          on a simulation platform.

config TEGRA_FPGA_PLATFORM
        bool "FPGA"
        help
          This enables support for a Tegra FPGA platform.
          Select this only if you are an NVIDIA developer working
          on a FPGA platform.
endchoice

source "arch/arm/mach-tegra/p852/Kconfig"

choice
        prompt "Low-level debug console UART"
        default TEGRA_DEBUG_UART_NONE

config TEGRA_DEBUG_UART_NONE
        bool "None"

config TEGRA_DEBUG_UARTA
        bool "UART-A"
	depends on DEBUG_LL

config TEGRA_DEBUG_UARTB
        bool "UART-B"
	depends on DEBUG_LL

config TEGRA_DEBUG_UARTC
        bool "UART-C"
	depends on DEBUG_LL

config TEGRA_DEBUG_UARTD
        bool "UART-D"
	depends on DEBUG_LL

config TEGRA_DEBUG_UARTE
        bool "UART-E"
	depends on DEBUG_LL
endchoice

config TEGRA_SYSTEM_DMA
	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
	default y
	help
	  Adds system DMA functionality for NVIDIA Tegra SoCs, used by
	  several Tegra device drivers

config TEGRA_PWM
	tristate "Enable PWM driver"
	select HAVE_PWM
	help
	  Enable support for the Tegra PWM controller(s).

config TEGRA_FIQ_DEBUGGER
	bool "Enable the FIQ serial debugger on Tegra"
	default n
	select FIQ_DEBUGGER
	help
	  Enables the FIQ serial debugger on Tegra

config TEGRA_P1852_TDM
	bool "Enable TDM mode for P1852 SKUs"
	default n
	depends on MACH_P1852
	help
		Enables TDM mode driver for P1852 SKUs. If this
		is not defined then I2S mode is selected by default.

config TEGRA_CARDHU_DSI
	bool "Support DSI panel on Cardhu"
	depends on MACH_CARDHU
	select TEGRA_DSI
	help
		Support for DSI Panel on Nvidia Cardhu

config TEGRA_CARDHU_DUAL_DSI_PANEL
	bool "Support Dual DSI panel on Cardhu"
	default n
	depends on TEGRA_CARDHU_DSI
	help
		Support for Dual DSI Panel on Nvidia Cardhu

config TEGRA_EMC_SCALING_ENABLE
	bool "Enable scaling the memory frequency"
	depends on TEGRA_SILICON_PLATFORM
	default n

config TEGRA_CPU_DVFS
	bool "Enable voltage scaling on Tegra CPU"
	depends on TEGRA_SILICON_PLATFORM
	default y

config TEGRA_CORE_DVFS
	bool "Enable voltage scaling on Tegra core"
	depends on TEGRA_SILICON_PLATFORM
	depends on TEGRA_CPU_DVFS
	default y

config TEGRA_IOVMM_GART
	bool "Enable I/O virtual memory manager for GART"
	depends on ARCH_TEGRA_2x_SOC && !TEGRA_IOMMU_GART
	default y
	select TEGRA_IOVMM
	help
	  Enables support for remapping discontiguous physical memory
	  shared with the operating system into contiguous I/O virtual
	  space through the GART (Graphics Address Relocation Table)
	  hardware included on Tegra SoCs.

config TEGRA_IOVMM_SMMU
	bool "Enable I/O virtual memory manager for SMMU"
	depends on !ARCH_TEGRA_2x_SOC && !TEGRA_IOMMU_SMMU
	default y
	select TEGRA_IOVMM
	help
	  Enables support for remapping discontiguous physical memory
	  shared with the operating system into contiguous I/O virtual
	  space through the SMMU (System Memory Management Unit)
	  hardware included on Tegra SoCs.

config TEGRA_IOVMM_SMMU_SYSFS
	bool "Enable SMMU register access for debugging"
	depends on TEGRA_IOVMM_SMMU
	default n
	help
	  Enables SMMU register access through /sys/devices/smmu/* files.

config TEGRA_IOVMM
	depends on TEGRA_IOVMM_GART || TEGRA_IOVMM_SMMU
	bool

config TEGRA_AVP_KERNEL_ON_MMU
	bool "Use AVP MMU to relocate AVP kernel"
	depends on ARCH_TEGRA_2x_SOC
	default y
	help
	  Use AVP MMU to relocate AVP kernel (nvrm_avp.bin).

config TEGRA_AVP_KERNEL_ON_SMMU
	bool "Use SMMU to relocate AVP kernel"
	depends on TEGRA_IOVMM_SMMU || TEGRA_IOMMU_SMMU
	default y
	help
	  Use SMMU to relocate AVP kernel (nvrm_avp.bin).

config TEGRA_ARB_SEMAPHORE
	bool

config TEGRA_THERMAL_THROTTLE
	bool "Enable throttling of CPU speed on overtemp"
	depends on TEGRA_SILICON_PLATFORM
	depends on CPU_FREQ
	depends on THERMAL
	default y
	help
	  Also requires enabling a temperature sensor such as NCT1008.

config TEGRA_THERMAL_THROTTLE_EXACT_FREQ
	bool "Use exact cpu frequency capping when thermal throttling"
	depends on TEGRA_THERMAL_THROTTLE
	default n
	help
	  When this option is enabled, the cpu will run at the exact
	  frequency specified in the thermal throttle table when thermal
	  throttling; when disabled, the cpu frequency will clip to
	  the next lower frequency from the cpu frequency table.

config TEGRA_CLOCK_DEBUG_WRITE
	bool "Enable debugfs write access to clock tree"
	depends on DEBUG_FS
	default n

config TEGRA_CLUSTER_CONTROL
	bool
	depends on ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	default y if PM_SLEEP

config TEGRA_CPUQUIET
	bool

config TEGRA_AUTO_HOTPLUG
	bool "Enable automatic CPU hot-plugging"
	depends on HOTPLUG_CPU && CPU_FREQ && !ARCH_CPU_PROBE_RELEASE && !ARCH_TEGRA_2x_SOC
	select TEGRA_CPUQUIET
	default y
	help
	  This option enables turning CPUs off/on and switching tegra
	  high/low power CPU clusters automatically, corresponding to
	  CPU frequency scaling.

config TEGRA_MC_EARLY_ACK
	bool "Enable early acknowledgement from mermory controller"
	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_11x_SOC
	default y
	help
	  This option enables early acknowledgement from memory
	  controller. This feature is used to improve CPU memory
	  write performance.

config TEGRA_ERRATA_1157520
	bool "Memory writes are not consistent/ordered from CPU"
	depends on ARCH_TEGRA_11x_SOC
	help
	  On T11x With early ack scoreboard on, the read/writes to
	  SO and Non-Cached meory are randomly not observed in the
	  order they are performed. Enabling this errata disables
	  early ack scoreboard for T11x.

config TEGRA_MC_PROFILE
	tristate "Enable profiling memory controller utilization"
	default y
	help
	  When enabled, provides a mechanism to perform statistical
	  sampling of the memory controller usage on a client-by-client
	  basis, and report the log through sysfs.

config TEGRA_EDP_LIMITS
	bool "Enforce electrical design limits on CPU rail"
	depends on TEGRA_SILICON_PLATFORM
	depends on CPU_FREQ
	depends on THERMAL
	default y if ARCH_TEGRA_3x_SOC
	default n
	help
	  Limit maximum CPU frequency based on temperature and number
	  of on-line CPUs to keep CPU rail current within power supply
	  capabilities.

config TEGRA_EMC_TO_DDR_CLOCK
	int "EMC to DDR clocks ratio"
	default "2" if ARCH_TEGRA_2x_SOC
	default "1"

config TEGRA_SE_ON_CBUS
	bool "To Drive SE clock from cbus"
	default y
	help
	  This option enables SE clock to be derived from cbus

config TEGRA_CBUS_CLOCK_DIVIDER
	int "CBUS clock divider"
	default "2"

config TEGRA_STAT_MON
        bool "Enable H/W statistics monitor"
        depends on ARCH_TEGRA_2x_SOC
        default n
        help
          Enables support for hardware statistics monitor for AVP.

config USB_HOTPLUG
	bool "Enabling the USB hotplug"
	default n

config TEGRA_GADGET_BOOST_CPU_FREQ
	int "Boost cpu frequency for tegra usb gadget"
	range 0 1300 if ARCH_TEGRA_3x_SOC
	range 0 1800 if ARCH_TEGRA_11x_SOC
	default 0
	help
	  Devices need to boost frequency of CPU when they are connected
	  to host pc through usb cable for better performance. This value
	  is the amount of the frequency (in mhz) to be boosted. If it is
	  zero boosting frequency will not be enabled. This value will be
	  used only by usb gadget driver.

config TEGRA_DYNAMIC_PWRDET
	bool "Enable dynamic activation of IO level auto-detection"
	depends on TEGRA_SILICON_PLATFORM
	default n
	help
	  This option allows turning off tegra IO level auto-detection
	  when IO power is stable. If set auto-detection cells are active
	  only during power transitions, otherwise, the cells are active
	  always

config TEGRA_EDP_EXACT_FREQ
	bool "Use maximum possible cpu frequency when EDP capping"
	depends on TEGRA_EDP_LIMITS
	default y
	help
	  When enabled the cpu will run at the exact frequency
	  specified in the EDP table when EDP capping is applied; when
	  disabled the next lower cpufreq frequency will be used.

config TEGRA_WAKEUP_MONITOR
	bool "Enable tegra wakeup monitor"
	depends on PM_SLEEP
	help
	  This option enables support for the monitor of tegra wakeups, it will
	  send out wakeup source and uevents which indicate suspend_prepare and
	  post_suspend.

config TEGRA_BB_XMM_POWER
	bool "Enable power driver for XMM modem"
	default n
	help
	  Enables power driver which controls gpio signals to XMM modem.

config TEGRA_BB_XMM_POWER2
	tristate "Enable power driver for XMM modem (flashless)"
	default n
	help
	  Enables power driver which controls gpio signals to XMM modem
	  (in flashless configuration).  User-mode application must
	  insert this LKM to initiate 2nd USB enumeration power sequence
	  - after modem software has been downloaded to flashless device.

config TEGRA_PLLM_RESTRICTED
	bool "Restrict PLLM usage as module clock source"
	depends on !ARCH_TEGRA_2x_SOC
	default n
	help
	  When enabled, PLLM usage may be restricted to modules with dividers
	  capable of dividing maximum PLLM frequency at minimum voltage. When
	  disabled, PLLM is used as a clock source with no restrictions (which
	  may effectively increase lower limit for core voltage).

config TEGRA_WDT_RECOVERY
	bool "Enable suspend/resume watchdog recovery mechanism"
	default n
	help
	  Enables watchdog recovery mechanism to protect against
	  suspend/resume hangs.

config TEGRA_LP2_CPU_TIMER
	bool

config TEGRA_RAIL_OFF_MULTIPLE_CPUS
	bool

config TEGRA_SLOW_CSITE
	bool "lower csite clock to 1 Mhz to reduce its power consumption"
	default n
	help
	  When enabled, csite will be running at 1 Mhz and the performance of
	  jtag, lauterbach and other debugger will be extremely slow.

config TEGRA_PREINIT_CLOCKS
	bool "Preinitialize Tegra clocks to known states"
	default n
	help
	  Preinitialize Tegra clocks to known states before actual full-
	  scale clock initialization starts.

config TEGRA_PREPOWER_WIFI
	bool "Pre-power up WiFi "
	default n
	help
	  Pre-power up the on board WiFi chip

config TEGRA_DYNAMIC_CBUS
	bool "Adjust dynamically graphics clocks cumulative dvfs table"

config TEGRA_DUAL_CBUS
	bool "Use two plls (PLLC2/PLLC3) as graphics clocks sources"

config TEGRA_MIGRATE_CBUS_USERS
	bool "Move cbus users between source plls to optimize cumulative dvfs"
	depends on TEGRA_DYNAMIC_CBUS && TEGRA_DUAL_CBUS

config TEGRA_SKIN_THROTTLE
	bool "Skin Temperature throttling"
	depends on TEGRA_THERMAL_THROTTLE
	depends on THERM_EST
	default n
	help
	  Enable throttling to control the temperature of the skin/case
	  of the device.

config ARCH_TEGRA_4GB_MEMORY
	bool "Full 4GB physical memory support"
	default n
	help
	  Harmless to select this even if hardware does not support full
	  4GB physical memory.

config TEGRA_LP1_LOW_COREVOLTAGE
	bool "LP1 low core voltage"
	default n
	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_11x_SOC
	help
		Enable support for LP1 Core voltage to set to lowest

config TEGRA_LATENCY_ALLOWANCE
	bool "Allow memory clients to configure latency allowance"
	help
	  Latency allowance is a per-memory-client setting that tells the
	  memory controller how long it can ignore a request in favor of
	  others. In other words, It indicates how long a request from specific
	  memory client can wait before it is served.
	  Enabling this option allows memory clients configure the
	  latency allowance as per their bandwidth requirement.

config TEGRA_LATENCY_ALLOWANCE_SCALING
	bool "Enable latency allowance scaling"
	depends on TEGRA_LATENCY_ALLOWANCE
	help
	  Enables latency allowance scaling, which enables scaling
	  programmed latency allowance values based on fifo threshold levels
	  set for for display and vi hardware.

config TEGRA_MC_PTSA
	bool "Enable MC PTSA programming"
	depends on TEGRA_LATENCY_ALLOWANCE
	help
	  Enables Priority Tier Snap Arbiter programming in
	  Memory Controller. PTSA is a Memory Controller feature that
	  allows specifying the bandwidth necessary for ISO clients.

config TEGRA_DC_USE_HW_BPP
	bool "Default Bits Per Pixel value from tegra DC hardware"
	depends on TEGRA_DC
	default n
        help
	  Programs platform data to inform DC driver to use current
	  hardware value for bits per pixel setting.  Useful for
          preserving and displaying framebuffer content from bootloader.

config TEGRA_ISOMGR
	bool "Isochronous Bandwidth Manager "
	help
	  When enabled, drivers for ISO units can obtain ISO BW.
	  The memory controller (MC) for each Tegra platform can supply
	  a limited amount of isochronous (real-time) bandwidth.  When
	  enabled, isomgr will manage a pool of ISO BW.

config TEGRA_ISOMGR_POOL_KB_PER_SEC
	int "Size of isomgr pool "
	default 0
	help
	  Set this maximum ISO BW (in Kbytes/sec) that platform supports.
	  The memory controller (MC) for each Tegra platform can supply
	  a limited amount of isochronous (real-time) bandwidth.  Each
	  platform must specify the maximum amount of ISO BW that isomgr
	  should manage.

config TEGRA_ISOMGR_SYSFS
	bool "Visibility into Isochronous Bandwidth Manager state "
	depends on TEGRA_ISOMGR
	help
	  When enabled, sysfs can be used to query isomgr state.
	  This is used for visibility into isomgr state.  It could
	  be useful in debug or in understanding performance on a
	  running system.

config TEGRA_ISOMGR_DEBUG
	bool "Inject stimulus into Isochronous Bandwidth Manager "
	depends on TEGRA_ISOMGR && TEGRA_ISOMGR_SYSFS
	help
	  When enabled, sysfs can be used to inject stimulus into isomgr.
	  This is used to generate stimulus to isomgr for debug.  It's
	  especially useful for contriving isomgr tests.  You can write
	  user space tests that exercise isomgr in ways that drivers
	  couldn't easily accommodate.

config TEGRA_IO_DPD
	bool "Allow IO DPD"
	depends on ARCH_TEGRA_3x_SOC
	depends on PM_SLEEP
	default y
	help
	  Allow devices listed in tegra_list_io_dpd[] to go into
	  Deep Power Down (DPD) state. This is a temporary config
	  option until a proper way is implemented to resolve this issue.

config TEGRA_USE_DFLL_RANGE
	int "Default CPU DFLL operating range"
	depends on ARCH_TEGRA_HAS_CL_DVFS
	range 0 2
	default "1" if TEGRA_SILICON_PLATFORM
	default "0"
	help
	  Defines default range for dynamic frequency lock loop (DFLL)
	  to be used as CPU clock source:
	  "0" - DFLL is not used,
	  "1" - DFLL is used as a source for all CPU rates
	  "2" - DFLL is used only for high rates above crossover with
		PLL dvfs curve

config TEGRA_TIMER_HZ
	int "Kernel HZ (jiffies per second)"
	default "100" if TEGRA_FPGA_PLATFORM
	default "1000"

config TEGRA_SOCTHERM
	bool "Enable soctherm"
	depends on ARCH_TEGRA_11x_SOC
	default y
        help
	  Enables use of soctherm for thermal management.

config TEGRA_VIRTUAL_CPUID
	bool "virtualized CPUID"
	depends on !TRUSTED_FOUNDATIONS
	depends on ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	default n
	help
	  Enables virtualized CPUID.

config TEGRA_NVDUMPER
	bool "Enable NvDumper for post-mortem debugging"
	default n
	help
	  The nvdumper is a tool that saves a copy of RAM following a crash.
	  nvdumper kernel module tracks whether the system has been rebooted
	  cleanly. It does this by writing 'dirty' to a fixed physical memory
	  address when the kernel starts.
	  Then, on a planned reboot, we write 'clean' to this location.
	  The bootloader can then examine this location and see if the reboot
	  was dirty or clean.
	  It will dump the contents of memory after a dirty reboot.
	  This tool would be helpful for debugging kernel crash.
	  In order to use this feature, you should enable debug feature in
	  bootloader compiling option also (-DENABLE_NVDUMPER).
	  You can dump RAM with nvflash tool in dirty boot status.
	  usage: nvflash --dumpram [phy. RAM offset] [length] <filename>

config TEGRA_ARBITRATION_EMEM_INTR
	bool "Enable the ARBITRATION_EMEM interrupt in the MC"
	help
	  Enable this to allow the kernel to track arbitration conflicts
	  in the memory controller.

config TEGRA_CORE_EDP_LIMITS
	bool "Enforce electrical design limits on core rail"
	depends on TEGRA_SILICON_PLATFORM
	depends on THERMAL
	default n
	help
	  Limit maximum GPU and memory frequency to keep core rail current
	  within power supply capabilities.

config TEGRA_PLLM_SCALED
	bool "Enable memory PLLM run time scaling"
	depends on TEGRA_DUAL_CBUS
	select TEGRA_PLLM_RESTRICTED
	default n
	help
	  When enabled, memory PLLM can be scaled at run time to reduce
	  granularity of possible memory rate steps. In this case PLLC
	  provides a backup memory clock while PLLM is re-locking to the
	  new rate.

config TEGRA_ATOMICS
	bool "Support atomics operation"
	depends on SMP
	help
	  When enabled, spin lock type of synchronzation can be done between
	  two processors when global monitor is not available.

config TEGRA_USE_NCT
	bool "Enable NCT partition access"
	help
	  When enabled, we can read non-volatile items from NCT partition.
endif
