Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
new file mode 100644
index 0000000..e59f57f
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_mal.c
@@ -0,0 +1,463 @@
+/*
+ * ibm_ocp_mal.c
+ *
+ * Armin Kuster akuster@mvista.com
+ * Juen, 2002
+ *
+ * Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ocp.h>
+
+#include "ibm_emac_mal.h"
+
+// Locking: Should we share a lock with the client ? The client could provide
+// a lock pointer (optionally) in the commac structure... I don't think this is
+// really necessary though
+
+/* This lock protects the commac list. On today UP implementations, it's
+ * really only used as IRQ protection in mal_{register,unregister}_commac()
+ */
+static DEFINE_RWLOCK(mal_list_lock);
+
+int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&mal_list_lock, flags);
+
+ /* Don't let multiple commacs claim the same channel */
+ if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
+ (mal->rx_chan_mask & commac->rx_chan_mask)) {
+ write_unlock_irqrestore(&mal_list_lock, flags);
+ return -EBUSY;
+ }
+
+ mal->tx_chan_mask |= commac->tx_chan_mask;
+ mal->rx_chan_mask |= commac->rx_chan_mask;
+
+ list_add(&commac->list, &mal->commac);
+
+ write_unlock_irqrestore(&mal_list_lock, flags);
+
+ return 0;
+}
+
+int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&mal_list_lock, flags);
+
+ mal->tx_chan_mask &= ~commac->tx_chan_mask;
+ mal->rx_chan_mask &= ~commac->rx_chan_mask;
+
+ list_del_init(&commac->list);
+
+ write_unlock_irqrestore(&mal_list_lock, flags);
+
+ return 0;
+}
+
+int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
+{
+ switch (channel) {
+ case 0:
+ set_mal_dcrn(mal, DCRN_MALRCBS0, size);
+ break;
+#ifdef DCRN_MALRCBS1
+ case 1:
+ set_mal_dcrn(mal, DCRN_MALRCBS1, size);
+ break;
+#endif
+#ifdef DCRN_MALRCBS2
+ case 2:
+ set_mal_dcrn(mal, DCRN_MALRCBS2, size);
+ break;
+#endif
+#ifdef DCRN_MALRCBS3
+ case 3:
+ set_mal_dcrn(mal, DCRN_MALRCBS3, size);
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ibm_ocp_mal *mal = dev_instance;
+ unsigned long mal_error;
+
+ /*
+ * This SERR applies to one of the devices on the MAL, here we charge
+ * it against the first EMAC registered for the MAL.
+ */
+
+ mal_error = get_mal_dcrn(mal, DCRN_MALESR);
+
+ printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
+ "MAL" /* FIXME: get the name right */ , mal_error);
+
+ /* FIXME: decipher error */
+ /* DIXME: distribute to commacs, if possible */
+
+ /* Clear the error status register */
+ set_mal_dcrn(mal, DCRN_MALESR, mal_error);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ibm_ocp_mal *mal = dev_instance;
+ struct list_head *l;
+ unsigned long isr;
+
+ isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
+ set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
+
+ read_lock(&mal_list_lock);
+ list_for_each(l, &mal->commac) {
+ struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+
+ if (isr & mc->tx_chan_mask) {
+ mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
+ }
+ }
+ read_unlock(&mal_list_lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ibm_ocp_mal *mal = dev_instance;
+ struct list_head *l;
+ unsigned long isr;
+
+ isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
+ set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
+
+ read_lock(&mal_list_lock);
+ list_for_each(l, &mal->commac) {
+ struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+
+ if (isr & mc->rx_chan_mask) {
+ mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
+ }
+ }
+ read_unlock(&mal_list_lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ibm_ocp_mal *mal = dev_instance;
+ struct list_head *l;
+ unsigned long deir;
+
+ deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
+
+ /* FIXME: print which MAL correctly */
+ printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
+ "MAL", deir);
+
+ read_lock(&mal_list_lock);
+ list_for_each(l, &mal->commac) {
+ struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+
+ if (deir & mc->tx_chan_mask) {
+ mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
+ }
+ }
+ read_unlock(&mal_list_lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * This interrupt should be very rare at best. This occurs when
+ * the hardware has a problem with the receive descriptors. The manual
+ * states that it occurs when the hardware cannot the receive descriptor
+ * empty bit is not set. The recovery mechanism will be to
+ * traverse through the descriptors, handle any that are marked to be
+ * handled and reinitialize each along the way. At that point the driver
+ * will be restarted.
+ */
+static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ibm_ocp_mal *mal = dev_instance;
+ struct list_head *l;
+ unsigned long deir;
+
+ deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
+
+ /*
+ * This really is needed. This case encountered in stress testing.
+ */
+ if (deir == 0)
+ return IRQ_HANDLED;
+
+ /* FIXME: print which MAL correctly */
+ printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
+ "MAL", deir);
+
+ read_lock(&mal_list_lock);
+ list_for_each(l, &mal->commac) {
+ struct mal_commac *mc = list_entry(l, struct mal_commac, list);
+
+ if (deir & mc->rx_chan_mask) {
+ mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
+ }
+ }
+ read_unlock(&mal_list_lock);
+
+ return IRQ_HANDLED;
+}
+
+static int __init mal_probe(struct ocp_device *ocpdev)
+{
+ struct ibm_ocp_mal *mal = NULL;
+ struct ocp_func_mal_data *maldata;
+ int err = 0;
+
+ maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
+ if (maldata == NULL) {
+ printk(KERN_ERR "mal%d: Missing additional datas !\n",
+ ocpdev->def->index);
+ return -ENODEV;
+ }
+
+ mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
+ if (mal == NULL) {
+ printk(KERN_ERR
+ "mal%d: Out of memory allocating MAL structure !\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ memset(mal, 0, sizeof(*mal));
+
+ switch (ocpdev->def->index) {
+ case 0:
+ mal->dcrbase = DCRN_MAL_BASE;
+ break;
+#ifdef DCRN_MAL1_BASE
+ case 1:
+ mal->dcrbase = DCRN_MAL1_BASE;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ /**************************/
+
+ INIT_LIST_HEAD(&mal->commac);
+
+ set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
+ set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
+
+ set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */
+ /* FIXME: Add delay */
+
+ /* Set the MAL configuration register */
+ set_mal_dcrn(mal, DCRN_MALCR,
+ MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
+ MALCR_PLBLT_DEFAULT);
+
+ /* It would be nice to allocate buffers separately for each
+ * channel, but we can't because the channels share the upper
+ * 13 bits of address lines. Each channels buffer must also
+ * be 4k aligned, so we allocate 4k for each channel. This is
+ * inefficient FIXME: do better, if possible */
+ mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
+ MAL_DT_ALIGN *
+ maldata->num_tx_chans,
+ &mal->tx_phys_addr, GFP_KERNEL);
+ if (mal->tx_virt_addr == NULL) {
+ printk(KERN_ERR
+ "mal%d: Out of memory allocating MAL descriptors !\n",
+ ocpdev->def->index);
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* God, oh, god, I hate DCRs */
+ set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
+#ifdef DCRN_MALTXCTP1R
+ if (maldata->num_tx_chans > 1)
+ set_mal_dcrn(mal, DCRN_MALTXCTP1R,
+ mal->tx_phys_addr + MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP1R */
+#ifdef DCRN_MALTXCTP2R
+ if (maldata->num_tx_chans > 2)
+ set_mal_dcrn(mal, DCRN_MALTXCTP2R,
+ mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP2R */
+#ifdef DCRN_MALTXCTP3R
+ if (maldata->num_tx_chans > 3)
+ set_mal_dcrn(mal, DCRN_MALTXCTP3R,
+ mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP3R */
+#ifdef DCRN_MALTXCTP4R
+ if (maldata->num_tx_chans > 4)
+ set_mal_dcrn(mal, DCRN_MALTXCTP4R,
+ mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP4R */
+#ifdef DCRN_MALTXCTP5R
+ if (maldata->num_tx_chans > 5)
+ set_mal_dcrn(mal, DCRN_MALTXCTP5R,
+ mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP5R */
+#ifdef DCRN_MALTXCTP6R
+ if (maldata->num_tx_chans > 6)
+ set_mal_dcrn(mal, DCRN_MALTXCTP6R,
+ mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP6R */
+#ifdef DCRN_MALTXCTP7R
+ if (maldata->num_tx_chans > 7)
+ set_mal_dcrn(mal, DCRN_MALTXCTP7R,
+ mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
+#endif /* DCRN_MALTXCTP7R */
+
+ mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
+ MAL_DT_ALIGN *
+ maldata->num_rx_chans,
+ &mal->rx_phys_addr, GFP_KERNEL);
+
+ set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
+#ifdef DCRN_MALRXCTP1R
+ if (maldata->num_rx_chans > 1)
+ set_mal_dcrn(mal, DCRN_MALRXCTP1R,
+ mal->rx_phys_addr + MAL_DT_ALIGN);
+#endif /* DCRN_MALRXCTP1R */
+#ifdef DCRN_MALRXCTP2R
+ if (maldata->num_rx_chans > 2)
+ set_mal_dcrn(mal, DCRN_MALRXCTP2R,
+ mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
+#endif /* DCRN_MALRXCTP2R */
+#ifdef DCRN_MALRXCTP3R
+ if (maldata->num_rx_chans > 3)
+ set_mal_dcrn(mal, DCRN_MALRXCTP3R,
+ mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
+#endif /* DCRN_MALRXCTP3R */
+
+ err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
+ if (err)
+ goto fail;
+ err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
+ if (err)
+ goto fail;
+ err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
+ if (err)
+ goto fail;
+ err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
+ if (err)
+ goto fail;
+ err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
+ if (err)
+ goto fail;
+
+ set_mal_dcrn(mal, DCRN_MALIER,
+ MALIER_DE | MALIER_NE | MALIER_TE |
+ MALIER_OPBE | MALIER_PLBE);
+
+ /* Advertise me to the rest of the world */
+ ocp_set_drvdata(ocpdev, mal);
+
+ printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
+ ocpdev->def->index, maldata->num_tx_chans,
+ maldata->num_rx_chans);
+
+ return 0;
+
+ fail:
+ /* FIXME: dispose requested IRQs ! */
+ if (err && mal)
+ kfree(mal);
+ return err;
+}
+
+static void __exit mal_remove(struct ocp_device *ocpdev)
+{
+ struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
+ struct ocp_func_mal_data *maldata = ocpdev->def->additions;
+
+ BUG_ON(!maldata);
+
+ ocp_set_drvdata(ocpdev, NULL);
+
+ /* FIXME: shut down the MAL, deal with dependency with emac */
+ free_irq(maldata->serr_irq, mal);
+ free_irq(maldata->txde_irq, mal);
+ free_irq(maldata->txeob_irq, mal);
+ free_irq(maldata->rxde_irq, mal);
+ free_irq(maldata->rxeob_irq, mal);
+
+ if (mal->tx_virt_addr)
+ dma_free_coherent(&ocpdev->dev,
+ MAL_DT_ALIGN * maldata->num_tx_chans,
+ mal->tx_virt_addr, mal->tx_phys_addr);
+
+ if (mal->rx_virt_addr)
+ dma_free_coherent(&ocpdev->dev,
+ MAL_DT_ALIGN * maldata->num_rx_chans,
+ mal->rx_virt_addr, mal->rx_phys_addr);
+
+ kfree(mal);
+}
+
+/* Structure for a device driver */
+static struct ocp_device_id mal_ids[] = {
+ {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
+ {.vendor = OCP_VENDOR_INVALID}
+};
+
+static struct ocp_driver mal_driver = {
+ .name = "mal",
+ .id_table = mal_ids,
+
+ .probe = mal_probe,
+ .remove = mal_remove,
+};
+
+static int __init init_mals(void)
+{
+ int rc;
+
+ rc = ocp_register_driver(&mal_driver);
+ if (rc < 0) {
+ ocp_unregister_driver(&mal_driver);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit exit_mals(void)
+{
+ ocp_unregister_driver(&mal_driver);
+}
+
+module_init(init_mals);
+module_exit(exit_mals);