* Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS
* Add image information to README
* Fix dual PCMCIA slot support (when running with just one
slot populated)
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
* Start adding MIPS support files
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
new file mode 100644
index 0000000..56fc3da
--- /dev/null
+++ b/include/asm-mips/mipsregs.h
@@ -0,0 +1,540 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#if 0
+#include <linux/linkage.h>
+#endif
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+
+/*
+ * R4640/R4650 cp0 register names. These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux. A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0 $26
+#define CP0_S1_DERRADDR1 $27
+#define CP0_S1_INTCONTROL $20
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION $0
+#define CP1_STATUS $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
+
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
+
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#include <linux/config.h>
+#ifdef CONFIG_CPU_VR41XX
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
+#else
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#endif
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+
+/*
+ * Macros to access the system control coprocessor
+ */
+#define read_32bit_cp0_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "mfc0\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define read_32bit_cp0_set1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc0\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+/*
+ * For now use this only with interrupts disabled!
+ */
+#define read_64bit_cp0_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0,"STR(source)"\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res;})
+
+#define write_32bit_cp0_register(register,value) \
+ __asm__ __volatile__( \
+ "mtc0\t%0,"STR(register)"\n\t" \
+ "nop" \
+ : : "r" (value));
+
+#define write_32bit_cp0_set1_register(register,value) \
+ __asm__ __volatile__( \
+ "ctc0\t%0,"STR(register)"\n\t" \
+ "nop" \
+ : : "r" (value));
+
+#define write_64bit_cp0_register(register,value) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%0,"STR(register)"\n\t" \
+ ".set\tmips0" \
+ : : "r" (value))
+
+/*
+ * This should be changed when we get a compiler that support the MIPS32 ISA.
+ */
+#define read_mips32_cp0_config1() \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tnoreorder\n\t" \
+ ".set\tnoat\n\t" \
+ ".word\t0x40018001\n\t" \
+ "move\t%0,$1\n\t" \
+ ".set\tat\n\t" \
+ ".set\treorder" \
+ :"=r" (__res)); \
+ __res;})
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0 (1<< 8)
+#define IE_SW1 (1<< 9)
+#define IE_IRQ0 (1<<10)
+#define IE_IRQ1 (1<<11)
+#define IE_IRQ2 (1<<12)
+#define IE_IRQ3 (1<<13)
+#define IE_IRQ4 (1<<14)
+#define IE_IRQ5 (1<<15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0 (1<< 8)
+#define C_SW1 (1<< 9)
+#define C_IRQ0 (1<<10)
+#define C_IRQ1 (1<<11)
+#define C_IRQ2 (1<<12)
+#define C_IRQ3 (1<<13)
+#define C_IRQ4 (1<<14)
+#define C_IRQ5 (1<<15)
+
+#ifndef _LANGUAGE_ASSEMBLY
+/*
+ * Manipulate the status register.
+ * Mostly used to access the interrupt bits.
+ */
+#define __BUILD_SET_CP0(name,register) \
+extern __inline__ unsigned int \
+set_cp0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_32bit_cp0_register(register); \
+ res |= set; \
+ write_32bit_cp0_register(register, res); \
+ \
+ return res; \
+} \
+ \
+extern __inline__ unsigned int \
+clear_cp0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_32bit_cp0_register(register); \
+ res &= ~clear; \
+ write_32bit_cp0_register(register, res); \
+ \
+ return res; \
+} \
+ \
+extern __inline__ unsigned int \
+change_cp0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_32bit_cp0_register(register); \
+ res &= ~change; \
+ res |= (new & change); \
+ if(change) \
+ write_32bit_cp0_register(register, res); \
+ \
+ return res; \
+}
+
+__BUILD_SET_CP0(status,CP0_STATUS)
+__BUILD_SET_CP0(cause,CP0_CAUSE)
+__BUILD_SET_CP0(config,CP0_CONFIG)
+
+#endif /* defined (_LANGUAGE_ASSEMBLY) */
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE 0x00000001
+#define ST0_EXL 0x00000002
+#define ST0_ERL 0x00000004
+#define ST0_KSU 0x00000018
+# define KSU_USER 0x00000010
+# define KSU_SUPERVISOR 0x00000008
+# define KSU_KERNEL 0x00000000
+#define ST0_UX 0x00000020
+#define ST0_SX 0x00000040
+#define ST0_KX 0x00000080
+#define ST0_DE 0x00010000
+#define ST0_CE 0x00020000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC 0x00000001
+#define ST0_KUC 0x00000002
+#define ST0_IEP 0x00000004
+#define ST0_KUP 0x00000008
+#define ST0_IEO 0x00000010
+#define ST0_KUO 0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC 0x00010000
+#define ST0_SWC 0x00020000
+#define ST0_CM 0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM (1 << 4)
+#define ST0_IL (1 << 23)
+#define ST0_DL (1 << 24)
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT 19
+#define TX39_CONF_ICS_MASK 0x00380000
+#define TX39_CONF_ICS_1KB 0x00000000
+#define TX39_CONF_ICS_2KB 0x00080000
+#define TX39_CONF_ICS_4KB 0x00100000
+#define TX39_CONF_ICS_8KB 0x00180000
+#define TX39_CONF_ICS_16KB 0x00200000
+
+#define TX39_CONF_DCS_SHIFT 16
+#define TX39_CONF_DCS_MASK 0x00070000
+#define TX39_CONF_DCS_1KB 0x00000000
+#define TX39_CONF_DCS_2KB 0x00010000
+#define TX39_CONF_DCS_4KB 0x00020000
+#define TX39_CONF_DCS_8KB 0x00030000
+#define TX39_CONF_DCS_16KB 0x00040000
+
+#define TX39_CONF_CWFON 0x00004000
+#define TX39_CONF_WBON 0x00002000
+#define TX39_CONF_RF_SHIFT 10
+#define TX39_CONF_RF_MASK 0x00000c00
+#define TX39_CONF_DOZE 0x00000200
+#define TX39_CONF_HALT 0x00000100
+#define TX39_CONF_LOCK 0x00000080
+#define TX39_CONF_ICE 0x00000020
+#define TX39_CONF_DCE 0x00000010
+#define TX39_CONF_IRSIZE_SHIFT 2
+#define TX39_CONF_IRSIZE_MASK 0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT 0
+#define TX39_CONF_DRSIZE_MASK 0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM 0x0000ff00
+#define STATUSB_IP0 8
+#define STATUSF_IP0 (1 << 8)
+#define STATUSB_IP1 9
+#define STATUSF_IP1 (1 << 9)
+#define STATUSB_IP2 10
+#define STATUSF_IP2 (1 << 10)
+#define STATUSB_IP3 11
+#define STATUSF_IP3 (1 << 11)
+#define STATUSB_IP4 12
+#define STATUSF_IP4 (1 << 12)
+#define STATUSB_IP5 13
+#define STATUSF_IP5 (1 << 13)
+#define STATUSB_IP6 14
+#define STATUSF_IP6 (1 << 14)
+#define STATUSB_IP7 15
+#define STATUSF_IP7 (1 << 15)
+#define STATUSB_IP8 0
+#define STATUSF_IP8 (1 << 0)
+#define STATUSB_IP9 1
+#define STATUSF_IP9 (1 << 1)
+#define STATUSB_IP10 2
+#define STATUSF_IP10 (1 << 2)
+#define STATUSB_IP11 3
+#define STATUSF_IP11 (1 << 3)
+#define STATUSB_IP12 4
+#define STATUSF_IP12 (1 << 4)
+#define STATUSB_IP13 5
+#define STATUSF_IP13 (1 << 5)
+#define STATUSB_IP14 6
+#define STATUSF_IP14 (1 << 6)
+#define STATUSB_IP15 7
+#define STATUSF_IP15 (1 << 7)
+#define ST0_CH 0x00040000
+#define ST0_SR 0x00100000
+#define ST0_BEV 0x00400000
+#define ST0_RE 0x02000000
+#define ST0_FR 0x04000000
+#define ST0_CU 0xf0000000
+#define ST0_CU0 0x10000000
+#define ST0_CU1 0x20000000
+#define ST0_CU2 0x40000000
+#define ST0_CU3 0x80000000
+#define ST0_XX 0x80000000 /* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define CAUSEB_EXCCODE 2
+#define CAUSEF_EXCCODE (31 << 2)
+#define CAUSEB_IP 8
+#define CAUSEF_IP (255 << 8)
+#define CAUSEB_IP0 8
+#define CAUSEF_IP0 (1 << 8)
+#define CAUSEB_IP1 9
+#define CAUSEF_IP1 (1 << 9)
+#define CAUSEB_IP2 10
+#define CAUSEF_IP2 (1 << 10)
+#define CAUSEB_IP3 11
+#define CAUSEF_IP3 (1 << 11)
+#define CAUSEB_IP4 12
+#define CAUSEF_IP4 (1 << 12)
+#define CAUSEB_IP5 13
+#define CAUSEF_IP5 (1 << 13)
+#define CAUSEB_IP6 14
+#define CAUSEF_IP6 (1 << 14)
+#define CAUSEB_IP7 15
+#define CAUSEF_IP7 (1 << 15)
+#define CAUSEB_IV 23
+#define CAUSEF_IV (1 << 23)
+#define CAUSEB_CE 28
+#define CAUSEF_CE (3 << 28)
+#define CAUSEB_BD 31
+#define CAUSEF_BD (1 << 31)
+
+/*
+ * Bits in the coprozessor 0 config register.
+ */
+#define CONF_CM_CACHABLE_NO_WA 0
+#define CONF_CM_CACHABLE_WA 1
+#define CONF_CM_UNCACHED 2
+#define CONF_CM_CACHABLE_NONCOHERENT 3
+#define CONF_CM_CACHABLE_CE 4
+#define CONF_CM_CACHABLE_COW 5
+#define CONF_CM_CACHABLE_CUW 6
+#define CONF_CM_CACHABLE_ACCELERATED 7
+#define CONF_CM_CMASK 7
+#define CONF_DB (1 << 4)
+#define CONF_IB (1 << 5)
+#define CONF_SC (1 << 17)
+#define CONF_AC (1 << 23)
+#define CONF_HALT (1 << 25)
+
+/*
+ * R10000 performance counter definitions.
+ *
+ * FIXME: The R10000 performance counter opens a nice way to implement CPU
+ * time accounting with a precission of one cycle. I don't have
+ * R10000 silicon but just a manual, so ...
+ */
+
+/*
+ * Events counted by counter #0
+ */
+#define CE0_CYCLES 0
+#define CE0_INSN_ISSUED 1
+#define CE0_LPSC_ISSUED 2
+#define CE0_S_ISSUED 3
+#define CE0_SC_ISSUED 4
+#define CE0_SC_FAILED 5
+#define CE0_BRANCH_DECODED 6
+#define CE0_QW_WB_SECONDARY 7
+#define CE0_CORRECTED_ECC_ERRORS 8
+#define CE0_ICACHE_MISSES 9
+#define CE0_SCACHE_I_MISSES 10
+#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
+#define CE0_EXT_INTERVENTIONS_REQ 12
+#define CE0_EXT_INVALIDATE_REQ 13
+#define CE0_VIRTUAL_COHERENCY_COND 14
+#define CE0_INSN_GRADUATED 15
+
+/*
+ * Events counted by counter #1
+ */
+#define CE1_CYCLES 0
+#define CE1_INSN_GRADUATED 1
+#define CE1_LPSC_GRADUATED 2
+#define CE1_S_GRADUATED 3
+#define CE1_SC_GRADUATED 4
+#define CE1_FP_INSN_GRADUATED 5
+#define CE1_QW_WB_PRIMARY 6
+#define CE1_TLB_REFILL 7
+#define CE1_BRANCH_MISSPREDICTED 8
+#define CE1_DCACHE_MISS 9
+#define CE1_SCACHE_D_MISSES 10
+#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
+#define CE1_EXT_INTERVENTION_HITS 12
+#define CE1_EXT_INVALIDATE_REQ 13
+#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
+#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
+
+/*
+ * These flags define in which priviledge mode the counters count events
+ */
+#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
+#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
+#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
+#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
+
+#endif /* _ASM_MIPSREGS_H */