TEA/XTEA algorithm contributors:
Aaron Grothe
+ Michael Ringe
Khazad algorithm contributors:
Aaron Grothe
---------------------------
-What: register_serial/unregister_serial
-When: September 2005
-Why: This interface does not allow serial ports to be registered against
- a struct device, and as such does not allow correct power management
- of such ports. 8250-based ports should use serial8250_register_port
- and serial8250_unregister_port, or platform devices instead.
-Who: Russell King <rmk@arm.linux.org.uk>
-
----------------------------
-
What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
When: November 2005
Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
statm Process memory status information
status Process status in human readable form
wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
+ smaps Extension based on maps, presenting the rss size for each mapped file
..............................................................................
For example, to get the status information of a process, all you have to do is
--- /dev/null
+Author: Andreas Steinmetz <ast@domdv.de>
+
+
+How to use dm-crypt and swsusp together:
+========================================
+
+Some prerequisites:
+You know how dm-crypt works. If not, visit the following web page:
+http://www.saout.de/misc/dm-crypt/
+You have read Documentation/power/swsusp.txt and understand it.
+You did read Documentation/initrd.txt and know how an initrd works.
+You know how to create or how to modify an initrd.
+
+Now your system is properly set up, your disk is encrypted except for
+the swap device(s) and the boot partition which may contain a mini
+system for crypto setup and/or rescue purposes. You may even have
+an initrd that does your current crypto setup already.
+
+At this point you want to encrypt your swap, too. Still you want to
+be able to suspend using swsusp. This, however, means that you
+have to be able to either enter a passphrase or that you read
+the key(s) from an external device like a pcmcia flash disk
+or an usb stick prior to resume. So you need an initrd, that sets
+up dm-crypt and then asks swsusp to resume from the encrypted
+swap device.
+
+The most important thing is that you set up dm-crypt in such
+a way that the swap device you suspend to/resume from has
+always the same major/minor within the initrd as well as
+within your running system. The easiest way to achieve this is
+to always set up this swap device first with dmsetup, so that
+it will always look like the following:
+
+brw------- 1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
+
+Now set up your kernel to use /dev/mapper/swap0 as the default
+resume partition, so your kernel .config contains:
+
+CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
+
+Prepare your boot loader to use the initrd you will create or
+modify. For lilo the simplest setup looks like the following
+lines:
+
+image=/boot/vmlinuz
+initrd=/boot/initrd.gz
+label=linux
+append="root=/dev/ram0 init=/linuxrc rw"
+
+Finally you need to create or modify your initrd. Lets assume
+you create an initrd that reads the required dm-crypt setup
+from a pcmcia flash disk card. The card is formatted with an ext2
+fs which resides on /dev/hde1 when the card is inserted. The
+card contains at least the encrypted swap setup in a file
+named "swapkey". /etc/fstab of your initrd contains something
+like the following:
+
+/dev/hda1 /mnt ext3 ro 0 0
+none /proc proc defaults,noatime,nodiratime 0 0
+none /sys sysfs defaults,noatime,nodiratime 0 0
+
+/dev/hda1 contains an unencrypted mini system that sets up all
+of your crypto devices, again by reading the setup from the
+pcmcia flash disk. What follows now is a /linuxrc for your
+initrd that allows you to resume from encrypted swap and that
+continues boot with your mini system on /dev/hda1 if resume
+does not happen:
+
+#!/bin/sh
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+mount /proc
+mount /sys
+mapped=0
+noresume=`grep -c noresume /proc/cmdline`
+if [ "$*" != "" ]
+then
+ noresume=1
+fi
+dmesg -n 1
+/sbin/cardmgr -q
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+ if [ -f /proc/ide/hde/media ]
+ then
+ usleep 500000
+ mount -t ext2 -o ro /dev/hde1 /mnt
+ if [ -f /mnt/swapkey ]
+ then
+ dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
+ fi
+ umount /mnt
+ break
+ fi
+ usleep 500000
+done
+killproc /sbin/cardmgr
+dmesg -n 6
+if [ $mapped = 1 ]
+then
+ if [ $noresume != 0 ]
+ then
+ mkswap /dev/mapper/swap0 > /dev/null 2>&1
+ fi
+ echo 254:0 > /sys/power/resume
+ dmsetup remove swap0
+fi
+umount /sys
+mount /mnt
+umount /proc
+cd /mnt
+pivot_root . mnt
+mount /proc
+umount -l /mnt
+umount /proc
+exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
+
+Please don't mind the weird loop above, busybox's msh doesn't know
+the let statement. Now, what is happening in the script?
+First we have to decide if we want to try to resume, or not.
+We will not resume if booting with "noresume" or any parameters
+for init like "single" or "emergency" as boot parameters.
+
+Then we need to set up dmcrypt with the setup data from the
+pcmcia flash disk. If this succeeds we need to reset the swap
+device if we don't want to resume. The line "echo 254:0 > /sys/power/resume"
+then attempts to resume from the first device mapper device.
+Note that it is important to set the device in /sys/power/resume,
+regardless if resuming or not, otherwise later suspend will fail.
+If resume starts, script execution terminates here.
+
+Otherwise we just remove the encrypted swap device and leave it to the
+mini system on /dev/hda1 to set the whole crypto up (it is up to
+you to modify this to your taste).
+
+What then follows is the well known process to change the root
+file system and continue booting from there. I prefer to unmount
+the initrd prior to continue booting but it is up to you to modify
+this.
system is shut down or suspended. Additionally use the encrypted
suspend image to prevent sensitive data from being stolen after
resume.
+
+Q: Why we cannot suspend to a swap file?
+
+A: Because accessing swap file needs the filesystem mounted, and
+filesystem might do something wrong (like replaying the journal)
+during mount. [Probably could be solved by modifying every filesystem
+to support some kind of "really read-only!" option. Patches welcome.]
POSTing bios works. Ole Rohne has patch to do just that at
http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
+(8) on some systems, you can use the video_post utility mentioned here:
+ http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
+ && /usr/sbin/video_post - which will initialize the display in console mode.
+ If you are in X, you can switch to a virtual terminal and back to X using
+ CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
+
Now, if you pass acpi_sleep=something, and it does not work with your
bios, you'll get a hard crash during resume. Be careful. Also it is
safest to do your experiments with plain old VGA console. The vesafb
------------------------------------------------------------------------------
Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI
Acer TM 242FX vbetool (6)
-Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6)
+Acer TM C110 video_post (8)
+Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
Acer TM 4052LCi s3_bios (2)
Acer TM 636Lci s3_bios vga=normal (2)
Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back
vmtruncate) does not lose sending ipi's to cloned threads that might
be spawned underneath it and go to user mode to drag in pte's into tlbs.
-swap_list_lock/swap_device_lock
--------------------------------
+swap_lock
+--------------
The swap devices are chained in priority order from the "swap_list" header.
The "swap_list" is used for the round-robin swaphandle allocation strategy.
The #free swaphandles is maintained in "nr_swap_pages". These two together
-are protected by the swap_list_lock.
+are protected by the swap_lock.
-The swap_device_lock, which is per swap device, protects the reference
-counts on the corresponding swaphandles, maintained in the "swap_map"
-array, and the "highest_bit" and "lowest_bit" fields.
+The swap_lock also protects all the device reference counts on the
+corresponding swaphandles, maintained in the "swap_map" array, and the
+"highest_bit" and "lowest_bit" fields.
-Both of these are spinlocks, and are never acquired from intr level. The
-locking hierarchy is swap_list_lock -> swap_device_lock.
+The swap_lock is a spinlock, and is never acquired from intr level.
To prevent races between swap space deletion or async readahead swapins
deciding whether a swap handle is being used, ie worthy of being read in
The GETSTATUS call returns if the device is open or not.
[FIXME -- silliness again?]
+booke_wdt.c -- PowerPC BookE Watchdog Timer
+
+ Timeout default varies according to frequency, supports
+ SETTIMEOUT
+
+ Watchdog can not be turned off, CONFIG_WATCHDOG_NOWAYOUT
+ does not make sense
+
+ GETSUPPORT returns the watchdog_info struct, and
+ GETSTATUS returns the supported options. GETBOOTSTATUS
+ returns a 1 if the last reset was caused by the
+ watchdog and a 0 otherwise. This watchdog can not be
+ disabled once it has been started. The wdt_period kernel
+ parameter selects which bit of the time base changing
+ from 0->1 will trigger the watchdog exception. Changing
+ the timeout from the ioctl calls will change the
+ wdt_period as defined above. Finally if you would like to
+ replace the default Watchdog Handler you can implement the
+ WatchdogHandler() function in your own code.
+
eurotechwdt.c -- Eurotech CPU-1220/1410
The timeout can be set using the SETTIMEOUT ioctl and defaults
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o
-RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
+RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
# ===========================================================================
# Rules shared between *config targets and build targets
d = irq_desc + irq;
for (i = 0; i <= 3; i++, d++, irq++) {
if (req & (0x0100 << i)) {
- d->handle(irq, d, regs);
+ desc_handle_irq(irq, d, regs);
}
}
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_KEY_START;
- d->handle(LOCOMO_IRQ_KEY_START, d, regs);
+ desc_handle_irq(LOCOMO_IRQ_KEY_START, d, regs);
}
}
d = irq_desc + LOCOMO_IRQ_GPIO_START;
for (i = 0; i <= 15; i++, irq++, d++) {
if (req & (0x0001 << i)) {
- d->handle(irq, d, regs);
+ desc_handle_irq(irq, d, regs);
}
}
}
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_LT_START;
- d->handle(LOCOMO_IRQ_LT_START, d, regs);
+ desc_handle_irq(LOCOMO_IRQ_LT_START, d, regs);
}
}
for (i = 0; i <= 3; i++, irq++, d++) {
if (req & (0x0001 << i)) {
- d->handle(irq, d, regs);
+ desc_handle_irq(irq, d, regs);
}
}
}
return ret;
}
-static void __locomo_remove(struct locomo *lchip)
+static int locomo_remove_child(struct device *dev, void *data)
{
- struct list_head *l, *n;
-
- list_for_each_safe(l, n, &lchip->dev->children) {
- struct device *d = list_to_dev(l);
+ device_unregister(dev);
+ return 0;
+}
- device_unregister(d);
- }
+static void __locomo_remove(struct locomo *lchip)
+{
+ device_for_each_child(lchip->dev, NULL, locomo_remove_child);
if (lchip->irq != NO_IRQ) {
set_irq_chained_handler(lchip->irq, NULL);
.mask = sa1111_mask_lowirq,
.unmask = sa1111_unmask_lowirq,
.retrigger = sa1111_retrigger_lowirq,
- .type = sa1111_type_lowirq,
- .wake = sa1111_wake_lowirq,
+ .set_type = sa1111_type_lowirq,
+ .set_wake = sa1111_wake_lowirq,
};
static void sa1111_mask_highirq(unsigned int irq)
.mask = sa1111_mask_highirq,
.unmask = sa1111_unmask_highirq,
.retrigger = sa1111_retrigger_highirq,
- .type = sa1111_type_highirq,
- .wake = sa1111_wake_highirq,
+ .set_type = sa1111_type_highirq,
+ .set_wake = sa1111_wake_highirq,
};
static void sa1111_setup_irq(struct sa1111 *sachip)
if (pending) {
struct irqdesc *d = irq_desc + ec->irq;
- d->handle(ec->irq, d, regs);
+ desc_handle_irq(ec->irq, d, regs);
called ++;
}
}
* Serial cards should go in 0/1, ethernet/scsi in 2/3
* otherwise you will lose serial data at high speeds!
*/
- d->handle(ec->irq, d, regs);
+ desc_handle_irq(ec->irq, d, regs);
} else {
printk(KERN_WARNING "card%d: interrupt from unclaimed "
"card???\n", slot);
unsigned long flags;
spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->wake)
- desc->chip->wake(irq, 1);
+ if (desc->chip->set_wake)
+ desc->chip->set_wake(irq, 1);
spin_unlock_irqrestore(&irq_controller_lock, flags);
}
EXPORT_SYMBOL(enable_irq_wake);
unsigned long flags;
spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->wake)
- desc->chip->wake(irq, 0);
+ if (desc->chip->set_wake)
+ desc->chip->set_wake(irq, 0);
spin_unlock_irqrestore(&irq_controller_lock, flags);
}
EXPORT_SYMBOL(disable_irq_wake);
list_for_each_safe(l, n, &head) {
desc = list_entry(l, struct irqdesc, pend);
list_del_init(&desc->pend);
- desc->handle(desc - irq_desc, desc, regs);
+ desc_handle_irq(desc - irq_desc, desc, regs);
}
/*
irq_enter();
spin_lock(&irq_controller_lock);
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
/*
* Now re-run any pending interrupts.
}
desc = irq_desc + irq;
- if (desc->chip->type) {
+ if (desc->chip->set_type) {
spin_lock_irqsave(&irq_controller_lock, flags);
- ret = desc->chip->type(irq, type);
+ ret = desc->chip->set_type(irq, type);
spin_unlock_irqrestore(&irq_controller_lock, flags);
}
irq_desc[i].probing = 1;
irq_desc[i].triggered = 0;
- if (irq_desc[i].chip->type)
- irq_desc[i].chip->type(i, IRQT_PROBE);
+ if (irq_desc[i].chip->set_type)
+ irq_desc[i].chip->set_type(i, IRQT_PROBE);
irq_desc[i].chip->unmask(i);
irqs += 1;
}
* We need to tell the secondary core where to find
* its stack and the page tables.
*/
- secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
+ secondary_data.stack = (void *)idle->thread_info + THREAD_START_SP;
secondary_data.pgdir = virt_to_phys(pgd);
wmb();
}
desc = irq_desc + isa_irq;
- desc->handle(isa_irq, desc, regs);
+ desc_handle_irq(isa_irq, desc, regs);
}
static struct irqaction irq_cascade = { .handler = no_action, .name = "cascade", };
while (mask) {
if (mask & 1) {
IRQDBG("handling irq %d\n", irq);
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
}
irq++;
desc++;
desc = irq_desc + irq;
while (mask) {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
irq++;
desc++;
mask >>= 1;
while (mask) {
if (mask & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
}
irq++;
desc++;
.ack = imx_gpio_ack_irq,
.mask = imx_gpio_mask_irq,
.unmask = imx_gpio_unmask_irq,
- .type = imx_gpio_irq_type,
+ .set_type = imx_gpio_irq_type,
};
void __init
irq += IRQ_SIC_START;
desc = irq_desc + irq;
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
} while (status);
}
for (i = 0; i <= 7; i++) {
if (status & (1<<i)) {
desc = irq_desc + i + IRQ_IXP2000_GPIO0;
- desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs);
+ desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc, regs);
}
}
}
}
static struct irqchip ixp2000_GPIO_irq_chip = {
- .type = ixp2000_GPIO_irq_type,
- .ack = ixp2000_GPIO_irq_mask_ack,
- .mask = ixp2000_GPIO_irq_mask,
- .unmask = ixp2000_GPIO_irq_unmask
+ .ack = ixp2000_GPIO_irq_mask_ack,
+ .mask = ixp2000_GPIO_irq_mask,
+ .unmask = ixp2000_GPIO_irq_unmask
+ .set_type = ixp2000_GPIO_irq_type,
};
static void ixp2000_pci_irq_mask(unsigned int irq)
struct irqdesc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
cpld_desc = irq_desc + cpld_irq;
- cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ desc_handle_irq(cpld_irq, cpld_desc, regs);
}
}
struct irqdesc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
cpld_desc = irq_desc + cpld_irq;
- cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ desc_handle_irq(cpld_irq, cpld_desc, regs);
}
}
extern void lh7a400_init_irq (void);
extern void lh7a404_init_irq (void);
-#define IRQ_DISPATCH(irq) irq_desc[irq].handle ((irq), &irq_desc[irq], regs)
+#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
fpga_irq++, stat >>= 1) {
if (stat & 1) {
d = irq_desc + fpga_irq;
- d->handle(fpga_irq, d, regs);
+ desc_handle_irq(fpga_irq, d, regs);
}
}
}
.ack = pxa_ack_low_gpio,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
- .type = pxa_gpio_irq_type,
+ .set_type = pxa_gpio_irq_type,
};
/*
mask >>= 2;
do {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
irq++;
desc++;
mask >>= 1;
desc = irq_desc + irq;
do {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
irq++;
desc++;
mask >>= 1;
desc = irq_desc + irq;
do {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
irq++;
desc++;
mask >>= 1;
desc = irq_desc + irq;
do {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
irq++;
desc++;
mask >>= 1;
.ack = pxa_ack_muxed_gpio,
.mask = pxa_mask_muxed_gpio,
.unmask = pxa_unmask_muxed_gpio,
- .type = pxa_gpio_irq_type,
+ .set_type = pxa_gpio_irq_type,
};
if (likely(pending)) {
irq = LUBBOCK_IRQ(0) + __ffs(pending);
desc = irq_desc + irq;
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
}
pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
} while (pending);
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
desc = irq_desc + irq;
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
}
pending = MST_INTSETCLR & mainstone_irq_enabled;
} while (pending);
irqno = bast_pc104_irqs[i];
desc = irq_desc + irqno;
- desc->handle(irqno, desc, regs);
+ desc_handle_irq(irqno, desc, regs);
}
stat >>= 1;
.ack = s3c_irq_maskack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake
+ .set_wake = s3c_irq_wake
};
static struct irqchip s3c_irq_chip = {
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake
+ .set_wake = s3c_irq_wake
};
/* S3C2410_EINTMASK
.mask = s3c_irqext_mask,
.unmask = s3c_irqext_unmask,
.ack = s3c_irqext_ack,
- .type = s3c_irqext_type,
- .wake = s3c_irqext_wake
+ .set_type = s3c_irqext_type,
+ .set_wake = s3c_irqext_wake
};
static struct irqchip s3c_irq_eint0t4 = {
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake,
- .type = s3c_irqext_type,
+ .set_wake = s3c_irq_wake,
+ .set_type = s3c_irqext_type,
};
/* mask values for the parent registers for each of the interrupt types */
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_TC;
- mydesc->handle( IRQ_TC, mydesc, regs);
+ desc_handle_irq(IRQ_TC, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_ADC;
- mydesc->handle(IRQ_ADC, mydesc, regs);
+ desc_handle_irq(IRQ_ADC, mydesc, regs);
}
}
}
desc = irq_desc + start;
if (subsrc & 1)
- desc->handle(start, desc, regs);
+ desc_handle_irq(start, desc, regs);
desc++;
if (subsrc & 2)
- desc->handle(start+1, desc, regs);
+ desc_handle_irq(start+1, desc, regs);
desc++;
if (subsrc & 4)
- desc->handle(start+2, desc, regs);
+ desc_handle_irq(start+2, desc, regs);
}
}
s3c2410_pm_check_store();
- // need to make some form of time-delta
-
/* send the cpu to sleep... */
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
s3c2410_cpu_suspend(regs_save);
+ /* restore the cpu state */
+
+ cpu_init();
+
/* unset the return-from-sleep flag, to ensure reset */
tmp = __raw_readl(S3C2410_GSTATUS2);
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_S3C2440_WDT;
- mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_WDT, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_S3C2440_AC97;
- mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_AC97, mydesc, regs);
}
}
}
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_S3C2440_CAM_C;
- mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_S3C2440_CAM_P;
- mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc, regs);
}
}
}
.ack = sa1100_low_gpio_ack,
.mask = sa1100_low_gpio_mask,
.unmask = sa1100_low_gpio_unmask,
- .type = sa1100_gpio_type,
- .wake = sa1100_low_gpio_wake,
+ .set_type = sa1100_gpio_type,
+ .set_wake = sa1100_low_gpio_wake,
};
/*
mask >>= 11;
do {
if (mask & 1)
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
mask >>= 1;
irq++;
desc++;
.ack = sa1100_high_gpio_ack,
.mask = sa1100_high_gpio_mask,
.unmask = sa1100_high_gpio_unmask,
- .type = sa1100_gpio_type,
- .wake = sa1100_high_gpio_wake,
+ .set_type = sa1100_gpio_type,
+ .set_wake = sa1100_high_gpio_wake,
};
/*
if (irr & IRR_ETHERNET) {
d = irq_desc + IRQ_NEPONSET_SMC9196;
- d->handle(IRQ_NEPONSET_SMC9196, d, regs);
+ desc_handle_irq(IRQ_NEPONSET_SMC9196, d, regs);
}
if (irr & IRR_USAR) {
d = irq_desc + IRQ_NEPONSET_USAR;
- d->handle(IRQ_NEPONSET_USAR, d, regs);
+ desc_handle_irq(IRQ_NEPONSET_USAR, d, regs);
}
desc->chip->unmask(irq);
if (irr & IRR_SA1111) {
d = irq_desc + IRQ_NEPONSET_SA1111;
- d->handle(IRQ_NEPONSET_SA1111, d, regs);
+ desc_handle_irq(IRQ_NEPONSET_SA1111, d, regs);
}
}
}
irq += IRQ_SIC_START;
desc = irq_desc + irq;
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
} while (status);
}
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r0] @ read arm instruction
- tst r8, #1 << 20 @ L = 1 -> write?
- orreq r1, r1, #1 << 8 @ yes.
+ tst r8, #1 << 20 @ L = 0 -> write?
+ orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
nop
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r2] @ read arm instruction
- tst r8, #1 << 20 @ L = 1 -> write?
- orreq r1, r1, #1 << 8 @ yes.
+ tst r8, #1 << 20 @ L = 0 -> write?
+ orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
movne pc, lr
if (!(isr & 1))
continue;
d = irq_desc + gpio_irq;
- d->handle(gpio_irq, d, regs);
+ desc_handle_irq(gpio_irq, d, regs);
}
}
bool "Kernel profiling support"
config SYSTEM_PROFILER
- bool "System profiling support"
+ bool "System profiling support"
+
+source "lib/Kconfig.debug"
config ETRAX_KGDB
bool "Use kernel GDB debugger"
+ depends on DEBUG_KERNEL
---help---
The CRIS version of gdb can be used to remotely debug a running
Linux kernel via the serial debug port. Provided you have gdb-cris
this option is turned on!
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
config DEBUG_NMI_OOPS
- bool "NMI causes oops printout"
- help
- If the system locks up without any debug information you can say Y
- here to make it possible to dump an OOPS with an external NMI.
+ bool "NMI causes oops printout"
+ depends on DEBUG_KERNEL
+ help
+ If the system locks up without any debug information you can say Y
+ here to make it possible to dump an OOPS with an external NMI.
+
endmenu
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strtok);
EXPORT_SYMBOL(get_wchan);
486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
config MMU
bool
default y
depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
+ select SPARSEMEM_STATIC
# Need comments to help the hapless user trying to turn on NUMA support
comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- doublefault.o quirks.o
+ doublefault.o quirks.o i8237.o
obj-y += cpu/
obj-y += timers/
if (!error) {
acpi_lapic = 1;
+#ifdef CONFIG_X86_GENERICARCH
+ generic_bigsmp_probe();
+#endif
/*
* Parse MADT IO-APIC entries
*/
memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
GDT_ENTRY_TLS_ENTRIES * 8);
- __asm__ __volatile__("lgdt %0" : : "m" (cpu_gdt_descr[cpu]));
- __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+ load_gdt(&cpu_gdt_descr[cpu]);
+ load_idt(&idt_descr);
/*
* Delete NT
asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
/* Clear all 6 debug registers: */
-
-#define CD(register) set_debugreg(0, register)
-
- CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-
-#undef CD
+ set_debugreg(0, 0);
+ set_debugreg(0, 1);
+ set_debugreg(0, 2);
+ set_debugreg(0, 3);
+ set_debugreg(0, 6);
+ set_debugreg(0, 7);
/*
* Force FPU initialization:
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
-#define __hlt() __asm__ __volatile__("hlt": : :"memory")
-
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
outb(0xFE,0x21); /* TMR0 only */
outb(0xFF,0x80); /* delay */
- local_irq_enable();
-
- __hlt();
+ safe_halt();
wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- __hlt();
+ halt();
local_irq_disable();
bcr2.bits.CLOCKMUL = clock_ratio_index;
local_irq_disable();
wrmsrl (MSR_VIA_BCR2, bcr2.val);
- local_irq_enable();
-
- __hlt();
+ safe_halt();
/* Disable software clock multiplier */
rdmsrl (MSR_VIA_BCR2, bcr2.val);
setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
cr0 = 0x20000000;
- __asm__("movl %%cr0,%%eax\n\t"
- "orl %0,%%eax\n\t"
- "movl %%eax,%%cr0\n"
- : : "r" (cr0)
- :"ax");
+ write_cr0(read_cr0() | cr0);
/* CCR2 bit 2: lock NW bit and set WT1 */
setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
}
*/
static int __devinit num_cpu_cores(struct cpuinfo_x86 *c)
{
- unsigned int eax;
+ unsigned int eax, ebx, ecx, edx;
if (c->cpuid_level < 4)
return 1;
- __asm__("cpuid"
- : "=a" (eax)
- : "0" (4), "c" (0)
- : "bx", "dx");
-
+ /* Intel has a non-standard dependency on %ecx for this CPUID level. */
+ cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
if (eax & 0x1f)
return ((eax >> 26) + 1);
else
{
struct _cpuid4_info *this_leaf;
unsigned long num_threads_sharing;
+#ifdef CONFIG_X86_HT
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+#endif
this_leaf = CPUID4_INFO_IDX(cpu, index);
num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
#ifdef CONFIG_X86_HT
else if (num_threads_sharing == smp_num_siblings)
this_leaf->shared_cpu_map = cpu_sibling_map[cpu];
-#endif
+ else if (num_threads_sharing == (c->x86_num_cores * smp_num_siblings))
+ this_leaf->shared_cpu_map = cpu_core_map[cpu];
else
- printk(KERN_INFO "Number of CPUs sharing cache didn't match "
+ printk(KERN_DEBUG "Number of CPUs sharing cache didn't match "
"any known set of CPUs\n");
+#endif
}
#else
static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
static struct mtrr_value * mtrr_state;
-static int mtrr_save(struct sys_device * sysdev, u32 state)
+static int mtrr_save(struct sys_device * sysdev, pm_message_t state)
{
int i;
int size = num_var_ranges * sizeof(struct mtrr_value);
disable_local_APIC();
atomic_dec(&waiting_for_crash_ipi);
/* Assume hlt works */
- __asm__("hlt");
+ halt();
for(;;);
return 1;
struct Xgt_desc_struct gdt_desc = {0, 0};
unsigned long gdt, tss;
- __asm__ __volatile__("sgdt %0": "=m" (gdt_desc): :"memory");
+ store_gdt(&gdt_desc);
gdt = gdt_desc.address;
printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size);
* directory. If I have PSE, I just need to duplicate one entry in
* page directory.
*/
- __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+ cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {
efi_bak_pg_dir_pointer[0].pgd =
local_flush_tlb();
cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
- __asm__ __volatile__("lgdt %0":"=m"
- (*(struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])));
+ load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
}
static void efi_call_phys_epilog(void)
cpu_gdt_descr[0].address =
(unsigned long) __va(cpu_gdt_descr[0].address);
- __asm__ __volatile__("lgdt %0":"=m"(cpu_gdt_descr));
- __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+ load_gdt(&cpu_gdt_descr[0]);
+ cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {
swapper_pg_dir[pgd_index(0)].pgd =
{
memmap.map = NULL;
- memmap.map = (efi_memory_desc_t *)
- bt_ioremap((unsigned long) memmap.phys_map,
- (memmap.nr_map * sizeof(efi_memory_desc_t)));
-
+ memmap.map = bt_ioremap((unsigned long) memmap.phys_map,
+ (memmap.nr_map * memmap.desc_size));
if (memmap.map == NULL)
printk(KERN_ERR PFX "Could not remap the EFI memmap!\n");
+
+ memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size);
}
#if EFI_DEBUG
static void __init print_efi_memmap(void)
{
efi_memory_desc_t *md;
+ void *p;
int i;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) {
+ md = p;
printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, "
"range=[0x%016llx-0x%016llx) (%lluMB)\n",
i, md->type, md->attribute, md->phys_addr,
} prev, curr;
efi_memory_desc_t *md;
unsigned long start, end;
- int i;
+ void *p;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ md = p;
if ((md->num_pages == 0) || (!is_available_memory(md)))
continue;
memmap.phys_map = EFI_MEMMAP;
memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE;
memmap.desc_version = EFI_MEMDESC_VERSION;
+ memmap.desc_size = EFI_MEMDESC_SIZE;
efi.systab = (efi_system_table_t *)
boot_ioremap((unsigned long) efi_phys.systab,
printk(KERN_ERR PFX "Could not map the runtime service table!\n");
/* Map the EFI memory map for use until paging_init() */
-
- memmap.map = (efi_memory_desc_t *)
- boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE);
-
+ memmap.map = boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE);
if (memmap.map == NULL)
printk(KERN_ERR PFX "Could not map the EFI memory map!\n");
- if (EFI_MEMDESC_SIZE != sizeof(efi_memory_desc_t)) {
- printk(KERN_WARNING PFX "Warning! Kernel-defined memdesc doesn't "
- "match the one from EFI!\n");
- }
+ memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size);
+
#if EFI_DEBUG
print_efi_memmap();
#endif
}
+static inline void __init check_range_for_systab(efi_memory_desc_t *md)
+{
+ if (((unsigned long)md->phys_addr <= (unsigned long)efi_phys.systab) &&
+ ((unsigned long)efi_phys.systab < md->phys_addr +
+ ((unsigned long)md->num_pages << EFI_PAGE_SHIFT))) {
+ unsigned long addr;
+
+ addr = md->virt_addr - md->phys_addr +
+ (unsigned long)efi_phys.systab;
+ efi.systab = (efi_system_table_t *)addr;
+ }
+}
+
/*
* This function will switch the EFI runtime services to virtual mode.
* Essentially, look through the EFI memmap and map every region that
{
efi_memory_desc_t *md;
efi_status_t status;
- int i;
+ void *p;
efi.systab = NULL;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ md = p;
- if (md->attribute & EFI_MEMORY_RUNTIME) {
- md->virt_addr =
- (unsigned long)ioremap(md->phys_addr,
- md->num_pages << EFI_PAGE_SHIFT);
- if (!(unsigned long)md->virt_addr) {
- printk(KERN_ERR PFX "ioremap of 0x%lX failed\n",
- (unsigned long)md->phys_addr);
- }
+ if (!(md->attribute & EFI_MEMORY_RUNTIME))
+ continue;
- if (((unsigned long)md->phys_addr <=
- (unsigned long)efi_phys.systab) &&
- ((unsigned long)efi_phys.systab <
- md->phys_addr +
- ((unsigned long)md->num_pages <<
- EFI_PAGE_SHIFT))) {
- unsigned long addr;
-
- addr = md->virt_addr - md->phys_addr +
- (unsigned long)efi_phys.systab;
- efi.systab = (efi_system_table_t *)addr;
- }
+ md->virt_addr = (unsigned long)ioremap(md->phys_addr,
+ md->num_pages << EFI_PAGE_SHIFT);
+ if (!(unsigned long)md->virt_addr) {
+ printk(KERN_ERR PFX "ioremap of 0x%lX failed\n",
+ (unsigned long)md->phys_addr);
}
+ /* update the virtual address of the EFI system table */
+ check_range_for_systab(md);
}
if (!efi.systab)
BUG();
status = phys_efi_set_virtual_address_map(
- sizeof(efi_memory_desc_t) * memmap.nr_map,
- sizeof(efi_memory_desc_t),
+ memmap.desc_size * memmap.nr_map,
+ memmap.desc_size,
memmap.desc_version,
memmap.phys_map);
{
struct resource *res;
efi_memory_desc_t *md;
- int i;
+ void *p;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ md = p;
if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) >
0x100000000ULL)
u32 efi_mem_type(unsigned long phys_addr)
{
efi_memory_desc_t *md;
- int i;
+ void *p;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ md = p;
if ((md->phys_addr <= phys_addr) && (phys_addr <
(md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
return md->type;
u64 efi_mem_attributes(unsigned long phys_addr)
{
efi_memory_desc_t *md;
- int i;
+ void *p;
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ md = p;
if ((md->phys_addr <= phys_addr) && (phys_addr <
(md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
return md->attribute;
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
pushl %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
- # system call tracing in operation
+ # system call tracing in operation / emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
movl %esp, %eax
xorl %edx,%edx
call do_syscall_trace
+ cmpl $0, %eax
+ jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
+ # so must skip actual syscall
movl ORIG_EAX(%esp), %eax
cmpl $(nr_syscalls), %eax
jnae syscall_call
subl %edi,%ecx
shrl $2,%ecx
rep ; stosl
+/*
+ * Copy bootup parameters out of the way.
+ * Note: %esi still has the pointer to the real-mode data.
+ * With the kexec as boot loader, parameter segment might be loaded beyond
+ * kernel image and might not even be addressable by early boot page tables.
+ * (kexec on panic case). Hence copy out the parameters before initializing
+ * page tables.
+ */
+ movl $(boot_params - __PAGE_OFFSET),%edi
+ movl $(PARAM_SIZE/4),%ecx
+ cld
+ rep
+ movsl
+ movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
+ andl %esi,%esi
+ jnz 2f # New command line protocol
+ cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
+ jne 1f
+ movzwl OLD_CL_OFFSET,%esi
+ addl $(OLD_CL_BASE_ADDR),%esi
+2:
+ movl $(saved_command_line - __PAGE_OFFSET),%edi
+ movl $(COMMAND_LINE_SIZE/4),%ecx
+ rep
+ movsl
+1:
/*
* Initialize page tables. This creates a PDE and a set of page
*/
call setup_idt
-/*
- * Copy bootup parameters out of the way.
- * Note: %esi still has the pointer to the real-mode data.
- */
- movl $boot_params,%edi
- movl $(PARAM_SIZE/4),%ecx
- cld
- rep
- movsl
- movl boot_params+NEW_CL_POINTER,%esi
- andl %esi,%esi
- jnz 2f # New command line protocol
- cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
- jne 1f
- movzwl OLD_CL_OFFSET,%esi
- addl $(OLD_CL_BASE_ADDR),%esi
-2:
- movl $saved_command_line,%edi
- movl $(COMMAND_LINE_SIZE/4),%ecx
- rep
- movsl
-1:
checkCPUtype:
movl $-1,X86_CPUID # -1 for no CPUID initially
--- /dev/null
+/*
+ * i8237.c: 8237A DMA controller suspend functions.
+ *
+ * Written by Pierre Ossman, 2005.
+ */
+
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+
+/*
+ * This module just handles suspend/resume issues with the
+ * 8237A DMA controller (used for ISA and LPC).
+ * Allocation is handled in kernel/dma.c and normal usage is
+ * in asm/dma.h.
+ */
+
+static int i8237A_resume(struct sys_device *dev)
+{
+ unsigned long flags;
+ int i;
+
+ flags = claim_dma_lock();
+
+ dma_outb(DMA1_RESET_REG, 0);
+ dma_outb(DMA2_RESET_REG, 0);
+
+ for (i = 0;i < 8;i++) {
+ set_dma_addr(i, 0x000000);
+ /* DMA count is a bit weird so this is not 0 */
+ set_dma_count(i, 1);
+ }
+
+ /* Enable cascade DMA or channel 0-3 won't work */
+ enable_dma(4);
+
+ release_dma_lock(flags);
+
+ return 0;
+}
+
+static int i8237A_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return 0;
+}
+
+static struct sysdev_class i8237_sysdev_class = {
+ set_kset_name("i8237"),
+ .suspend = i8237A_suspend,
+ .resume = i8237A_resume,
+};
+
+static struct sys_device device_i8237A = {
+ .id = 0,
+ .cls = &i8237_sysdev_class,
+};
+
+static int __init i8237A_init_sysfs(void)
+{
+ int error = sysdev_class_register(&i8237_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_i8237A);
+ return error;
+}
+
+device_initcall(i8237A_init_sysfs);
volatile struct pt_regs * regs = (struct pt_regs *) &unused;
unsigned int level = regs->ebx;
unsigned int old = (regs->eflags >> 12) & 3;
+ struct thread_struct *t = ¤t->thread;
if (level > 3)
return -EINVAL;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
}
- regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12);
- /* Make sure we return the long way (not sysenter) */
- set_thread_flag(TIF_IRET);
+ t->iopl = level << 12;
+ regs->eflags = (regs->eflags & ~X86_EFLAGS_IOPL) | t->iopl;
+ set_iopl_mask(t->iopl);
return 0;
}
static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode)
{
struct mm_struct * mm = current->mm;
- __u32 entry_1, entry_2, *lp;
+ __u32 entry_1, entry_2;
int error;
struct user_desc ldt_info;
goto out_unlock;
}
- lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt);
-
/* Allow LDTs to be cleared by the user. */
if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
if (oldmode || LDT_empty(&ldt_info)) {
/* Install the new entry ... */
install:
- *lp = entry_1;
- *(lp+1) = entry_2;
+ write_ldt_entry(mm->context.ldt, ldt_info.entry_number, entry_1, entry_2);
error = 0;
out_unlock:
#include <asm/apic.h>
#include <asm/cpufeature.h>
#include <asm/desc.h>
-
-static inline unsigned long read_cr3(void)
-{
- unsigned long cr3;
- asm volatile("movl %%cr3,%0": "=r"(cr3));
- return cr3;
-}
+#include <asm/system.h>
#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
curidt.size = limit;
curidt.address = (unsigned long)newidt;
- __asm__ __volatile__ (
- "lidtl %0\n"
- : : "m" (curidt)
- );
+ load_idt(&curidt);
};
curgdt.size = limit;
curgdt.address = (unsigned long)newgdt;
- __asm__ __volatile__ (
- "lgdtl %0\n"
- : : "m" (curgdt)
- );
+ load_gdt(&curgdt);
};
static void load_segments(void)
}
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+ /* see notes above for revision 1.07. Apparent chip bug */
+ serialize_cpu();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
(unsigned long) uci->mc->bits >> 16 >> 16);
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+ /* see notes above for revision 1.07. Apparent chip bug */
+ serialize_cpu();
+
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
int pic_mode;
unsigned long mp_lapic_addr;
+unsigned int def_to_bigsmp = 0;
+
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
/* Internal processor count */
static void __init MP_processor_info (struct mpc_config_processor *m)
{
- int ver, apicid;
+ int ver, apicid, cpu, found_bsp = 0;
physid_mask_t tmp;
if (!(m->mpc_cpuflag & CPU_ENABLED))
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
Dprintk(" Bootup CPU\n");
boot_cpu_physical_apicid = m->mpc_apicid;
+ found_bsp = 1;
}
if (num_processors >= NR_CPUS) {
return;
}
+ if (found_bsp)
+ cpu = 0;
+ else
+ cpu = num_processors - 1;
+ cpu_set(cpu, cpu_possible_map);
tmp = apicid_to_cpu_present(apicid);
physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp);
ver = 0x10;
}
apic_version[m->mpc_apicid] = ver;
+ if ((num_processors > 8) &&
+ APIC_XAPIC(ver) &&
+ (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
+ def_to_bigsmp = 1;
+ else
+ def_to_bigsmp = 0;
+
bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
}
static struct class *msr_class;
-/* Note: "err" is handled in a funny way below. Otherwise one version
- of gcc or another breaks. */
-
static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx)
{
int err;
- asm volatile ("1: wrmsr\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %4,%0\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n" " .long 1b,3b\n" ".previous":"=&bDS" (err)
- :"a"(eax), "d"(edx), "c"(reg), "i"(-EIO), "0"(0));
-
+ err = wrmsr_safe(reg, eax, edx);
+ if (err)
+ err = -EIO;
return err;
}
{
int err;
- asm volatile ("1: rdmsr\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %4,%0\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,3b\n"
- ".previous":"=&bDS" (err), "=a"(*eax), "=d"(*edx)
- :"c"(reg), "i"(-EIO), "0"(0));
-
+ err = rdmsr_safe(reg, eax, edx);
+ if (err)
+ err = -EIO;
return err;
}
*/
alert_counter[cpu]++;
if (alert_counter[cpu] == 5*nmi_hz)
+ /*
+ * die_nmi will return ONLY if NOTIFY_STOP happens..
+ */
die_nmi(regs, "NMI Watchdog detected LOCKUP");
- } else {
+
last_irq_sums[cpu] = sum;
alert_counter[cpu] = 0;
}
*/
local_irq_disable();
while (1)
- __asm__ __volatile__("hlt":::"memory");
+ halt();
}
#else
static inline void play_dead(void)
printk(" DS: %04x ES: %04x\n",
0xffff & regs->xds,0xffff & regs->xes);
- __asm__("movl %%cr0, %0": "=r" (cr0));
- __asm__("movl %%cr2, %0": "=r" (cr2));
- __asm__("movl %%cr3, %0": "=r" (cr3));
- /* This could fault if %cr4 does not exist */
- __asm__("1: movl %%cr4, %0 \n"
- "2: \n"
- ".section __ex_table,\"a\" \n"
- ".long 1b,2b \n"
- ".previous \n"
- : "=r" (cr4): "0" (0));
+ cr0 = read_cr0();
+ cr2 = read_cr2();
+ cr3 = read_cr3();
+ if (current_cpu_data.x86 > 4) {
+ cr4 = read_cr4();
+ }
printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4);
show_trace(NULL, ®s->esp);
}
__unlazy_fpu(prev_p);
/*
- * Reload esp0, LDT and the page table pointer:
+ * Reload esp0.
*/
load_esp0(tss, next);
/*
- * Load the per-thread Thread-Local Storage descriptor.
+ * Save away %fs and %gs. No need to save %es and %ds, as
+ * those are always kernel segments while inside the kernel.
+ * Doing this before setting the new TLS descriptors avoids
+ * the situation where we temporarily have non-reloadable
+ * segments in %fs and %gs. This could be an issue if the
+ * NMI handler ever used %fs or %gs (it does not today), or
+ * if the kernel is running inside of a hypervisor layer.
*/
- load_TLS(next, cpu);
+ savesegment(fs, prev->fs);
+ savesegment(gs, prev->gs);
/*
- * Save away %fs and %gs. No need to save %es and %ds, as
- * those are always kernel segments while inside the kernel.
+ * Load the per-thread Thread-Local Storage descriptor.
*/
- asm volatile("mov %%fs,%0":"=m" (prev->fs));
- asm volatile("mov %%gs,%0":"=m" (prev->gs));
+ load_TLS(next, cpu);
/*
* Restore %fs and %gs if needed.
if (prev->gs | next->gs)
loadsegment(gs, next->gs);
+ /*
+ * Restore IOPL if needed.
+ */
+ if (unlikely(prev->iopl != next->iopl))
+ set_iopl_mask(next->iopl);
+
/*
* Now maybe reload the debug registers
*/
void ptrace_disable(struct task_struct *child)
{
clear_singlestep(child);
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
}
/*
}
break;
+ case PTRACE_SYSEMU: /* continue and stop at next syscall, which will not be executed */
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: /* restart after signal. */
ret = -EIO;
if (!valid_signal(data))
break;
- if (request == PTRACE_SYSCALL) {
+ if (request == PTRACE_SYSEMU) {
+ set_tsk_thread_flag(child, TIF_SYSCALL_EMU);
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ } else if (request == PTRACE_SYSCALL) {
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- }
- else {
+ clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
+ } else {
+ clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
}
child->exit_code = data;
wake_up_process(child);
break;
+ case PTRACE_SYSEMU_SINGLESTEP: /* Same as SYSEMU, but singlestep if not syscall */
case PTRACE_SINGLESTEP: /* set the trap flag. */
ret = -EIO;
if (!valid_signal(data))
break;
+
+ if (request == PTRACE_SYSEMU_SINGLESTEP)
+ set_tsk_thread_flag(child, TIF_SYSCALL_EMU);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
+
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
set_singlestep(child);
child->exit_code = data;
* - triggered by current->work.syscall_trace
*/
__attribute__((regparm(3)))
-void do_syscall_trace(struct pt_regs *regs, int entryexit)
+int do_syscall_trace(struct pt_regs *regs, int entryexit)
{
+ int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU), ret = 0;
+ /* With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall
+ * interception. */
+ int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP);
+
/* do the secure computing check first */
secure_computing(regs->orig_eax);
- if (unlikely(current->audit_context) && entryexit)
- audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax);
+ if (unlikely(current->audit_context)) {
+ if (entryexit)
+ audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax);
+ /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
+ * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
+ * not used, entry.S will call us only on syscall exit, not
+ * entry; so when TIF_SYSCALL_AUDIT is used we must avoid
+ * calling send_sigtrap() on syscall entry.
+ *
+ * Note that when PTRACE_SYSEMU_SINGLESTEP is used,
+ * is_singlestep is false, despite his name, so we will still do
+ * the correct thing.
+ */
+ else if (is_singlestep)
+ goto out;
+ }
if (!(current->ptrace & PT_PTRACED))
goto out;
+ /* If a process stops on the 1st tracepoint with SYSCALL_TRACE
+ * and then is resumed with SYSEMU_SINGLESTEP, it will come in
+ * here. We have to check this and return */
+ if (is_sysemu && entryexit)
+ return 0;
+
/* Fake a debug trap */
- if (test_thread_flag(TIF_SINGLESTEP))
+ if (is_singlestep)
send_sigtrap(current, regs, 0);
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu)
goto out;
/* the 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
+ /* Note that the debugger could change the result of test_thread_flag!*/
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
/*
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
+ ret = is_sysemu;
out:
if (unlikely(current->audit_context) && !entryexit)
audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax,
regs->ebx, regs->ecx, regs->edx, regs->esi);
+ if (ret == 0)
+ return 0;
+ regs->orig_eax = -1; /* force skip of syscall restarting */
+ if (unlikely(current->audit_context))
+ audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax);
+ return 1;
}
#include <linux/dmi.h>
#include <asm/uaccess.h>
#include <asm/apic.h>
+#include <asm/desc.h>
#include "mach_reboot.h"
#include <linux/reboot_fixups.h>
/* Set up the IDT for real mode. */
- __asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt));
+ load_idt(&real_mode_idt);
/* Set up a GDT from which we can load segment descriptors for real
mode. The GDT is not used in real mode; it is just needed here to
prepare the descriptors. */
- __asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt));
+ load_gdt(&real_mode_gdt);
/* Load the data segment registers, and thus the descriptors ready for
real mode. The base address of each segment is 0x100, 16 times the
if (!reboot_thru_bios) {
if (efi_enabled) {
efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL);
- __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ load_idt(&no_idt);
__asm__ __volatile__("int3");
}
/* rebooting needs to touch the page at absolute addr 0 */
mach_reboot_fixups(); /* for board specific fixups */
mach_reboot();
/* That didn't work - force a triple fault.. */
- __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ load_idt(&no_idt);
__asm__ __volatile__("int3");
}
}
* rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
*/
#include <linux/config.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
#include <asm/semaphore.h>
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-static fastcall void __attribute_used__ __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-static fastcall void __attribute_used__ __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- tsk->state = TASK_RUNNING;
-}
-
-static fastcall int __attribute_used__ __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * wait_queue_head. The "-1" is because we're
- * still hoping to get the semaphore.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_INTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- tsk->state = TASK_RUNNING;
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-static fastcall int __attribute_used__ __down_trylock(struct semaphore * sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock in the
- * wait_queue_head.
- */
- if (!atomic_add_negative(sleepers, &sem->count)) {
- wake_up_locked(&sem->wait);
- }
-
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- return 1;
-}
-
-
/*
* The semaphore operations have a special calling sequence that
* allow us to do a simpler in-line version of them. These routines
int i;
if (efi_enabled) {
- for (i = 0; i < memmap.nr_map; i++) {
- current_addr = memmap.map[i].phys_addr +
- (memmap.map[i].num_pages << 12);
- if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) {
+ efi_memory_desc_t *md;
+ void *p;
+
+ for (p = memmap.map, i = 0; p < memmap.map_end;
+ p += memmap.desc_size, i++) {
+ md = p;
+ current_addr = md->phys_addr + (md->num_pages << 12);
+ if (md->type == EFI_CONVENTIONAL_MEMORY) {
if (current_addr >= size) {
- memmap.map[i].num_pages -=
+ md->num_pages -=
(((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
memmap.nr_map = i + 1;
return;
*/
acpi_boot_table_init();
acpi_boot_init();
-#endif
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+ if (def_to_bigsmp)
+ &n
Code Review / linux-3.10.git / commitdiff