The framework provides generic functions (mostly kernel API calls), such as:
- Transport Stream URB handling in conjunction with dvb-demux-feed-control
- (bulk and isoc (TODO) are supported)
+ (bulk and isoc are supported)
- registering the device for the DVB-API
- registering an I2C-adapter if applicable
- remote-control/input-device handling
- firmware requesting and loading (currently just for the Cypress USB
- controller)
+ controllers)
- other functions/methods which can be shared by several drivers (such as
functions for bulk-control-commands)
+- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses
+ depending on length of a register and the number of values that can be
+ multi-written and multi-read.
The source code of the particular DVB USB devices does just the communication
with the device via the bus. The connection between the DVB-API-functionality
TODO: dynamic enabling and disabling of the pid-filter in regard to number of
feeds requested.
-Supported devices USB1.1
+Supported devices
========================
-Produced and reselled by Twinhan:
----------------------------------
-- TwinhanDTV USB-Ter DVB-T Device (VP7041)
- http://www.twinhan.com/product_terrestrial_3.asp
+See the LinuxTV DVB Wiki at www.linuxtv.org for a complete list of
+cards/drivers/firmwares:
-- TwinhanDTV Magic Box (VP7041e)
- http://www.twinhan.com/product_terrestrial_4.asp
-
-- HAMA DVB-T USB device
- http://www.hama.de/portal/articleId*110620/action*2598
-
-- CTS Portable (Chinese Television System) (2)
- http://www.2cts.tv/ctsportable/
-
-- Unknown USB DVB-T device with vendor ID Hyper-Paltek
-
-
-Produced and reselled by KWorld:
---------------------------------
-- KWorld V-Stream XPERT DTV DVB-T USB
- http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
-
-- JetWay DTV DVB-T USB
- http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
-
-- ADSTech Instant TV DVB-T USB
- http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
-
-
-Others:
--------
-- Ultima Electronic/Artec T1 USB TVBOX (AN2135, AN2235, AN2235 with Panasonic Tuner)
- http://82.161.246.249/products-tvbox.html
-
-- Compro Videomate DVB-U2000 - DVB-T USB (2)
- http://www.comprousa.com/products/vmu2000.htm
-
-- Grandtec USB DVB-T
- http://www.grand.com.tw/
-
-- AVerMedia AverTV DVBT USB
- http://www.avermedia.com/
-
-- DiBcom USB DVB-T reference device (non-public)
-
-
-Supported devices USB2.0-only
-=============================
-- Twinhan MagicBox II
- http://www.twinhan.com/product_terrestrial_7.asp
-
-- TwinhanDTV Alpha
- http://www.twinhan.com/product_terrestrial_8.asp
-
-- DigitalNow TinyUSB 2 DVB-t Receiver
- http://www.digitalnow.com.au/DigitalNow%20tinyUSB2%20Specifications.html
-
-- Hanftek UMT-010
- http://www.globalsources.com/si/6008819757082/ProductDetail/Digital-TV/product_id-100046529
-
-
-Supported devices USB2.0 and USB1.1
-=============================
-- Typhoon/Yakumo/HAMA/Yuan DVB-T mobile USB2.0
- http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
- http://www.yuan.com.tw/en/products/vdo_ub300.html
- http://www.hama.de/portal/articleId*114663/action*2563
- http://www.anubisline.com/english/articlec.asp?id=50502&catid=002
-
-- Artec T1 USB TVBOX (FX2) (2)
-
-- Hauppauge WinTV NOVA-T USB2
- http://www.hauppauge.com/
-
-- KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B)
-
-- DiBcom USB2.0 DVB-T reference device (non-public)
-
-- AVerMedia AverTV A800 DVB-T USB2.0
-
-1) It is working almost - work-in-progress.
-2) No test reports received yet.
+http://www.linuxtv.org/wiki/index.php/DVB_USB
0. History & News:
+ 2005-06-30 - added support for WideView WT-220U (Thanks to Steve Chang)
+ 2005-05-30 - added basic isochronous support to the dvb-usb-framework
+ added support for Conexant Hybrid reference design and Nebula DigiTV USB
2005-04-17 - all dibusb devices ported to make use of the dvb-usb-framework
2005-04-02 - re-enabled and improved remote control code.
2005-03-31 - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb.
2005-01-31 - distorted streaming is gone for USB1.1 devices
2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
- first almost working version for HanfTek UMT-010
- - found out, that Yakumo/HAMA/Typhoon are predessors of the HanfTek UMT-010
+ - found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
2005-01-10 - refactoring completed, now everything is very delightful
- tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
1. How to use?
1.1. Firmware
-Most of the USB drivers need to download a firmware to start working.
-
-for USB1.1 (AN2135) you need: dvb-usb-dibusb-5.0.0.11.fw
-for USB2.0 HanfTek: dvb-usb-umt-010-02.fw
-for USB2.0 DiBcom: dvb-usb-dibusb-6.0.0.8.fw
-for USB2.0 AVerMedia AverTV DVB-T USB2: dvb-usb-avertv-a800-01.fw
-for USB2.0 TwinhanDTV Alpha/MagicBox II: dvb-usb-vp7045-01.fw
-
-The files can be found on http://www.linuxtv.org/download/firmware/ .
+Most of the USB drivers need to download a firmware to the device before start
+working.
-We do not have the permission (yet) to publish the following firmware-files.
-You'll need to extract them from the windows drivers.
+Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
+you need for your device:
-You should be able to use "get_dvb_firmware dvb-usb" to get the firmware:
-
-for USB1.1 (AN2235) (a few Artec T1 devices): dvb-usb-dibusb-an2235-01.fw
-for USB2.0 Hauppauge: dvb-usb-nova-t-usb2-01.fw
-for USB2.0 ADSTech/Kworld USB2.0: dvb-usb-adstech-usb2-01.fw
-for USB2.0 Yakumo/Typhoon/Hama: dvb-usb-dtt200u-01.fw
+http://www.linuxtv.org/wiki/index.php/DVB_USB
1.2. Compiling
Gunnar Wittich and Joachim von Caron for their trust for providing
root-shells on their machines to implement support for new devices.
+ Allan Third and Michael Hutchinson for their help to write the Nebula
+ digitv-driver.
+
Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei
Jung from AVerMedia who kindly provided a special firmware to get the device
up and running in Linux.
Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by
writing the vp7045-driver.
- Some guys on the linux-dvb mailing list for encouraging me
+ Steve Chang from WideView for providing information for new devices and
+ firmware files.
+
+ Michael Paxton for submitting remote control keymaps.
+
+ Some guys on the linux-dvb mailing list for encouraging me.
Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
user-level firmware loader, which saves a lot of time
Ulf Hermenau for helping me out with traditional chinese.
André Smoktun and Christian Frömmel for supporting me with
- hardware and listening to my problems very patient.
+ hardware and listening to my problems very patiently.
-How to get the Nebula, PCTV and Twinhan DST cards working
-=========================================================
+How to get the Nebula Electronics DigiTV, Pinnacle PCTV Sat, Twinhan DST + clones working
+=========================================================================================
-This class of cards has a bt878a as the PCI interface, and
-require the bttv driver.
+1) General information
+======================
-Please pay close attention to the warning about the bttv module
-options below for the DST card.
+This class of cards has a bt878a chip as the PCI interface.
+The different card drivers require the bttv driver to provide the means
+to access the i2c bus and the gpio pins of the bt8xx chipset.
-1) General informations
-=======================
+2) Compilation rules for Kernel >= 2.6.12
+=========================================
-These drivers require the bttv driver to provide the means to access
-the i2c bus and the gpio pins of the bt8xx chipset.
+Enable the following options:
-Because of this, you need to enable
"Device drivers" => "Multimedia devices"
- => "Video For Linux" => "BT848 Video For Linux"
-
-Furthermore you need to enable
+ => "Video For Linux" => "BT848 Video For Linux"
"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+ => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
-2) Loading Modules
-==================
+3) Loading Modules, described by two approaches
+===============================================
In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
-TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
+i2c communication for us, plus the common dvb-bt8xx device driver,
+which is called the backend.
+The frontends for Nebula DigiTV (nxt6000), Pinnacle PCTV Sat (cx24110),
+TwinHan DST + clones (dst and dst-ca) are loaded automatically by the backend.
+For further details about TwinHan DST + clones see /Documentation/dvb/ci.txt.
-3a) Nebula / Pinnacle PCTV
---------------------------
+3a) The manual approach
+-----------------------
- $ modprobe bttv (normally bttv is being loaded automatically by kmod)
- $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
+Loading modules:
+modprobe bttv
+modprobe dvb-bt8xx
+Unloading modules:
+modprobe -r dvb-bt8xx
+modprobe -r bttv
-3b) TwinHan and Clones
+3b) The automatic approach
--------------------------
- $ modprobe bttv i2c_hw=1 card=0x71
- $ modprobe dvb-bt8xx
- $ modprobe dst
-
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which is necessary for TwinHan cards.
-
-If you're having an older card (blue color circuit) and card=0x71 locks
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
-
-The DST module takes a couple of useful parameters:
+If not already done by installation, place a line either in
+/etc/modules.conf or in /etc/modprobe.conf containing this text:
+alias char-major-81 bttv
-a. verbose takes values 0 to 5. These values control the verbosity level.
-b. debug takes values 0 and 1. You can either disable or enable debugging.
-c. dst_addons takes values 0 and 0x20:
-- A value of 0 means it is a FTA card.
-- A value of 0x20 means it has a Conditional Access slot.
+Then place a line in /etc/modules containing this text:
+dvb-bt8xx
-The autodetected values are determined by the "response string"
-of the card, which you can see in your logs:
-e.g.: dst_get_device_id: Recognize [DSTMCI]
+Reboot your system and have fun!
--
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla
will be available until removal of old names.
Who: Grant Coady <gcoady@gmail.com>
+---------------------------
+
+What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
+When: November 2005
+Files: drivers/pcmcia/: pcmcia_ioctl.c
+Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
+ normal hotpluggable bus, and with it using the default kernel
+ infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
+ control ioctl needed by cardmgr and cardctl from pcmcia-cs is
+ unnecessary, and makes further cleanups and integration of the
+ PCMCIA subsystem into the Linux kernel device driver model more
+ difficult. The features provided by cardmgr and cardctl are either
+ handled by the kernel itself now or are available in the new
+ pcmciautils package available at
+ http://kernel.org/pub/linux/utils/kernel/pcmcia/
+Who: Dominik Brodowski <linux@brodo.de>
--- /dev/null
+USERSPACE VERBS ACCESS
+
+ The ib_uverbs module, built by enabling CONFIG_INFINIBAND_USER_VERBS,
+ enables direct userspace access to IB hardware via "verbs," as
+ described in chapter 11 of the InfiniBand Architecture Specification.
+
+ To use the verbs, the libibverbs library, available from
+ <http://openib.org/>, is required. libibverbs contains a
+ device-independent API for using the ib_uverbs interface.
+ libibverbs also requires appropriate device-dependent kernel and
+ userspace driver for your InfiniBand hardware. For example, to use
+ a Mellanox HCA, you will need the ib_mthca kernel module and the
+ libmthca userspace driver be installed.
+
+User-kernel communication
+
+ Userspace communicates with the kernel for slow path, resource
+ management operations via the /dev/infiniband/uverbsN character
+ devices. Fast path operations are typically performed by writing
+ directly to hardware registers mmap()ed into userspace, with no
+ system call or context switch into the kernel.
+
+ Commands are sent to the kernel via write()s on these device files.
+ The ABI is defined in drivers/infiniband/include/ib_user_verbs.h.
+ The structs for commands that require a response from the kernel
+ contain a 64-bit field used to pass a pointer to an output buffer.
+ Status is returned to userspace as the return value of the write()
+ system call.
+
+Resource management
+
+ Since creation and destruction of all IB resources is done by
+ commands passed through a file descriptor, the kernel can keep track
+ of which resources are attached to a given userspace context. The
+ ib_uverbs module maintains idr tables that are used to translate
+ between kernel pointers and opaque userspace handles, so that kernel
+ pointers are never exposed to userspace and userspace cannot trick
+ the kernel into following a bogus pointer.
+
+ This also allows the kernel to clean up when a process exits and
+ prevent one process from touching another process's resources.
+
+Memory pinning
+
+ Direct userspace I/O requires that memory regions that are potential
+ I/O targets be kept resident at the same physical address. The
+ ib_uverbs module manages pinning and unpinning memory regions via
+ get_user_pages() and put_page() calls. It also accounts for the
+ amount of memory pinned in the process's locked_vm, and checks that
+ unprivileged processes do not exceed their RLIMIT_MEMLOCK limit.
+
+ Pages that are pinned multiple times are counted each time they are
+ pinned, so the value of locked_vm may be an overestimate of the
+ number of pages pinned by a process.
+
+/dev files
+
+ To create the appropriate character device files automatically with
+ udev, a rule like
+
+ KERNEL="uverbs*", NAME="infiniband/%k"
+
+ can be used. This will create device nodes named
+
+ /dev/infiniband/uverbs0
+
+ and so on. Since the InfiniBand userspace verbs should be safe for
+ use by non-privileged processes, it may be useful to add an
+ appropriate MODE or GROUP to the udev rule.
Medion MD4220 ??? (*)
Samsung P35 vbetool needed (6)
Sharp PC-AR10 (ATI rage) none (1)
+Sony Vaio PCG-C1VRX/K s3_bios (2)
Sony Vaio PCG-F403 ??? (*)
Sony Vaio PCG-N505SN ??? (*)
Sony Vaio vgn-s260 X or boot-radeon can init it (5)
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
+AUDIT SUBSYSTEM
+L: linux-audit@redhat.com (subscribers-only)
+S: Maintained
+
AX.25 NETWORK LAYER
P: Ralf Baechle
M: ralf@linux-mips.org
S: Maintained
PCMCIA SUBSYSTEM
+P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
-S: Unmaintained
+S: Maintained
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
+%.ko: scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
%/: scripts prepare FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
%.lst: %.c scripts FORCE
@echo ' modules_install - Install all modules'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
+ @echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
-ifeq ($(KBUILD_OUTPUT),)
+ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11.8
+# Fri May 13 17:16:03 2005
+#
+CONFIG_FRV=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GENERIC_CALIBRATE_DELAY is not set
+# CONFIG_GENERIC_HARDIRQS is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_KOBJECT_UEVENT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Fujitsu FR-V system setup
+#
+CONFIG_MMU=y
+CONFIG_FRV_OUTOFLINE_ATOMIC_OPS=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FRV_DEFL_CACHE_WBACK is not set
+# CONFIG_FRV_DEFL_CACHE_WBEHIND is not set
+CONFIG_FRV_DEFL_CACHE_WTHRU=y
+# CONFIG_FRV_DEFL_CACHE_DISABLED is not set
+
+#
+# CPU core support
+#
+CONFIG_CPU_FR451=y
+CONFIG_CPU_FR451_COMPILE=y
+CONFIG_FRV_L1_CACHE_SHIFT=5
+CONFIG_MB93091_VDK=y
+# CONFIG_MB93093_PDK is not set
+CONFIG_MB93090_MB00=y
+# CONFIG_MB93091_NO_MB is not set
+# CONFIG_GPREL_DATA_8 is not set
+CONFIG_GPREL_DATA_4=y
+# CONFIG_GPREL_DATA_NONE is not set
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCMCIA is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Executable formats
+#
+# CONFIG_BINFMT_ELF is not set
+CONFIG_BINFMT_ELF_FDPIC=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_FORK_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_KGDBOE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISER4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_GDBSTUB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
if (c == &boot_cpu_data)
sysenter_setup();
enable_sep_cpu();
+
+ if (c == &boot_cpu_data)
+ mtrr_bp_init();
+ else
+ mtrr_ap_init();
}
#ifdef CONFIG_X86_HT
/*
* Alignment at which movsl is preferred for bulk memory copies.
*/
-struct movsl_mask movsl_mask;
+struct movsl_mask movsl_mask __read_mostly;
#endif
void __devinit early_intel_workaround(struct cpuinfo_x86 *c)
mtrr_state.enabled = (lo & 0xc00) >> 10;
}
-/* Free resources associated with a struct mtrr_state */
-void __init finalize_mtrr_state(void)
-{
- kfree(mtrr_state.var_ranges);
- mtrr_state.var_ranges = NULL;
-}
-
/* Some BIOS's are fucked and don't set all MTRRs the same! */
void __init mtrr_state_warn(void)
{
*/
{
unsigned long flags;
+ struct mtrr_var_range *vr;
+
+ vr = &mtrr_state.var_ranges[reg];
local_irq_save(flags);
prepare_set();
/* The invalid bit is kept in the mask, so we simply clear the
relevant mask register to disable a range. */
mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
+ memset(vr, 0, sizeof(struct mtrr_var_range));
} else {
- mtrr_wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
- (base & size_and_mask) >> (32 - PAGE_SHIFT));
- mtrr_wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
- (-size & size_and_mask) >> (32 - PAGE_SHIFT));
+ vr->base_lo = base << PAGE_SHIFT | type;
+ vr->base_hi = (base & size_and_mask) >> (32 - PAGE_SHIFT);
+ vr->mask_lo = -size << PAGE_SHIFT | 0x800;
+ vr->mask_hi = (-size & size_and_mask) >> (32 - PAGE_SHIFT);
+
+ mtrr_wrmsr(MTRRphysBase_MSR(reg), vr->base_lo, vr->base_hi);
+ mtrr_wrmsr(MTRRphysMask_MSR(reg), vr->mask_lo, vr->mask_hi);
}
post_set();
error = -EINVAL;
+ /* No CPU hotplug when we change MTRR entries */
+ lock_cpu_hotplug();
/* Search for existing MTRR */
down(&main_lock);
for (i = 0; i < num_var_ranges; ++i) {
error = i;
out:
up(&main_lock);
+ unlock_cpu_hotplug();
return error;
}
return -ENXIO;
max = num_var_ranges;
+ /* No CPU hotplug when we change MTRR entries */
+ lock_cpu_hotplug();
down(&main_lock);
if (reg < 0) {
/* Search for existing MTRR */
error = reg;
out:
up(&main_lock);
+ unlock_cpu_hotplug();
return error;
}
/**
centaur_init_mtrr();
}
-static void __init init_other_cpus(void)
-{
- if (use_intel())
- get_mtrr_state();
-
- /* bring up the other processors */
- set_mtrr(~0U,0,0,0);
-
- if (use_intel()) {
- finalize_mtrr_state();
- mtrr_state_warn();
- }
-}
-
-
+/* The suspend/resume methods are only for CPU without MTRR. CPU using generic
+ * MTRR driver doesn't require this
+ */
struct mtrr_value {
mtrr_type ltype;
unsigned long lbase;
/**
- * mtrr_init - initialize mtrrs on the boot CPU
+ * mtrr_bp_init - initialize mtrrs on the boot CPU
*
* This needs to be called early; before any of the other CPUs are
* initialized (i.e. before smp_init()).
*
*/
-static int __init mtrr_init(void)
+void __init mtrr_bp_init(void)
{
init_ifs();
if (mtrr_if) {
set_num_var_ranges();
init_table();
- init_other_cpus();
-
- return sysdev_driver_register(&cpu_sysdev_class,
- &mtrr_sysdev_driver);
+ if (use_intel())
+ get_mtrr_state();
}
- return -ENXIO;
}
-subsys_initcall(mtrr_init);
+void mtrr_ap_init(void)
+{
+ unsigned long flags;
+
+ if (!mtrr_if || !use_intel())
+ return;
+ /*
+ * Ideally we should hold main_lock here to avoid mtrr entries changed,
+ * but this routine will be called in cpu boot time, holding the lock
+ * breaks it. This routine is called in two cases: 1.very earily time
+ * of software resume, when there absolutely isn't mtrr entry changes;
+ * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to
+ * prevent mtrr entry changes
+ */
+ local_irq_save(flags);
+
+ mtrr_if->set_all();
+
+ local_irq_restore(flags);
+}
+
+static int __init mtrr_init_finialize(void)
+{
+ if (!mtrr_if)
+ return 0;
+ if (use_intel())
+ mtrr_state_warn();
+ else {
+ /* The CPUs haven't MTRR and seemes not support SMP. They have
+ * specific drivers, we use a tricky method to support
+ * suspend/resume for them.
+ * TBD: is there any system with such CPU which supports
+ * suspend/resume? if no, we should remove the code.
+ */
+ sysdev_driver_register(&cpu_sysdev_class,
+ &mtrr_sysdev_driver);
+ }
+ return 0;
+}
+subsys_initcall(mtrr_init_finialize);
extern unsigned int num_var_ranges;
-void finalize_mtrr_state(void);
void mtrr_state_warn(void);
char *mtrr_attrib_to_str(int x);
void mtrr_wrmsr(unsigned, unsigned, unsigned);
#endif
/* Package ID of each logical CPU */
-int phys_proc_id[NR_CPUS] = {[0 ... NR_CPUS-1] = BAD_APICID};
+int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
EXPORT_SYMBOL(phys_proc_id);
/* Core ID of each logical CPU */
-int cpu_core_id[NR_CPUS] = {[0 ... NR_CPUS-1] = BAD_APICID};
+int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
EXPORT_SYMBOL(cpu_core_id);
-cpumask_t cpu_sibling_map[NR_CPUS];
+cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_sibling_map);
-cpumask_t cpu_core_map[NR_CPUS];
+cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_core_map);
/* bitmap of online cpus */
-cpumask_t cpu_online_map;
+cpumask_t cpu_online_map __read_mostly;
EXPORT_SYMBOL(cpu_online_map);
cpumask_t cpu_callin_map;
struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
EXPORT_SYMBOL(cpu_data);
-u8 x86_cpu_to_apicid[NR_CPUS] =
+u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly =
{ [0 ... NR_CPUS-1] = 0xff };
EXPORT_SYMBOL(x86_cpu_to_apicid);
#ifdef CONFIG_NUMA
/* which logical CPUs are on which nodes */
-cpumask_t node_2_cpu_mask[MAX_NUMNODES] =
+cpumask_t node_2_cpu_mask[MAX_NUMNODES] __read_mostly =
{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
/* which node each logical CPU is on */
-int cpu_2_node[NR_CPUS] = { [0 ... NR_CPUS-1] = 0 };
+int cpu_2_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
EXPORT_SYMBOL(cpu_2_node);
/* set up a mapping between cpu and node. */
#endif /* CONFIG_NUMA */
-u8 cpu_2_logical_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
static void map_cpu_to_logical_apicid(void)
{
DEFINE_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
-struct timer_opts *cur_timer = &timer_none;
+struct timer_opts *cur_timer __read_mostly = &timer_none;
/*
* This is a special lock that is owned by the CPU and holds the index
#include "mach_timer.h"
#include <asm/hpet.h>
-static unsigned long hpet_usec_quotient; /* convert hpet clks to usec */
+static unsigned long __read_mostly hpet_usec_quotient; /* convert hpet clks to usec */
static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */
static unsigned long hpet_last; /* hpet counter value at last tick*/
static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
/************************************************************/
/* tsc timer_opts struct */
-static struct timer_opts timer_hpet = {
+static struct timer_opts timer_hpet __read_mostly = {
.name = "hpet",
.mark_offset = mark_offset_hpet,
.get_offset = get_offset_hpet,
*(.data.cacheline_aligned)
}
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) }
_edata = .; /* End of data section */
. = ALIGN(THREAD_SIZE); /* init_task */
void iounmap(volatile void __iomem *addr)
{
struct vm_struct *p;
- if ((void __force *) addr <= high_memory)
+
+ if ((void __force *)addr <= high_memory)
return;
/*
return;
write_lock(&vmlist_lock);
- p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+ p = __remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr));
if (!p) {
printk(KERN_WARNING "iounmap: bad address %p\n", addr);
+ dump_stack();
goto out_unlock;
}
fix_processor_context();
do_fpu_end();
+ mtrr_ap_init();
}
void restore_processor_state(void)
*
* Setup routines for Renesas M32700UT Board
*
- * Copyright (c) 2002 Hiroyuki Kondo, Hirokazu Takata,
- * Hitoshi Yamamoto, Takeo Takahashi
+ * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata,
+ * Hitoshi Yamamoto, Takeo Takahashi
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
enable_m32700ut_irq(M32R_IRQ_INT2);
-//#if defined(CONFIG_VIDEO_M32R_AR)
+#if defined(CONFIG_VIDEO_M32R_AR)
/*
* INT3# is used for AR
*/
irq_desc[M32R_IRQ_INT3].depth = 1;
icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
disable_m32700ut_irq(M32R_IRQ_INT3);
-//#endif /* CONFIG_VIDEO_M32R_AR */
+#endif /* CONFIG_VIDEO_M32R_AR */
}
+#if defined(CONFIG_SMC91X)
+
#define LAN_IOSTART 0x300
#define LAN_IOEND 0x320
static struct resource smc91x_resources[] = {
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
+#endif
+
+#if defined(CONFIG_FB_S1D13XXX)
+
+#include <video/s1d13xxxfb.h>
+#include <asm/s1d13806.h>
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+ .initregs = s1d13xxxfb_initregs,
+ .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
+ .platform_init_video = NULL,
+#ifdef CONFIG_PM
+ .platform_suspend_video = NULL,
+ .platform_resume_video = NULL,
+#endif
+};
+
+static struct resource s1d13xxxfb_resources[] = {
+ [0] = {
+ .start = 0x10600000UL,
+ .end = 0x1073FFFFUL,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x10400000UL,
+ .end = 0x104001FFUL,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device s1d13xxxfb_device = {
+ .name = S1D_DEVICENAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &s1d13xxxfb_data,
+ },
+ .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
+ .resource = s1d13xxxfb_resources,
+};
+#endif
static int __init platform_init(void)
{
+#if defined(CONFIG_SMC91X)
platform_device_register(&smc91x_device);
+#endif
+#if defined(CONFIG_FB_S1D13XXX)
+ platform_device_register(&s1d13xxxfb_device);
+#endif
return 0;
}
arch_initcall(platform_init);
*
* Setup routines for Renesas MAPPI Board
*
- * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata,
- * Hitoshi Yamamoto
+ * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
+ * Hitoshi Yamamoto
*/
#include <linux/config.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/device.h>
#include <asm/system.h>
#include <asm/m32r.h>
disable_mappi_irq(M32R_IRQ_INT2);
#endif /* CONFIG_M32RPCC */
}
+
+#if defined(CONFIG_FB_S1D13XXX)
+
+#include <video/s1d13xxxfb.h>
+#include <asm/s1d13806.h>
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+ .initregs = s1d13xxxfb_initregs,
+ .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
+ .platform_init_video = NULL,
+#ifdef CONFIG_PM
+ .platform_suspend_video = NULL,
+ .platform_resume_video = NULL,
+#endif
+};
+
+static struct resource s1d13xxxfb_resources[] = {
+ [0] = {
+ .start = 0x10200000UL,
+ .end = 0x1033FFFFUL,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x10000000UL,
+ .end = 0x100001FFUL,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device s1d13xxxfb_device = {
+ .name = S1D_DEVICENAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &s1d13xxxfb_data,
+ },
+ .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
+ .resource = s1d13xxxfb_resources,
+};
+
+static int __init platform_init(void)
+{
+ platform_device_register(&s1d13xxxfb_device);
+ return 0;
+}
+arch_initcall(platform_init);
+#endif
*
* Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
*
- * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata,
- * Hitoshi Yamamoto, Mamoru Sakugawa
+ * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
+ * Hitoshi Yamamoto, Mamoru Sakugawa
*/
#include <linux/config.h>
*
* Setup routines for Renesas MAPPI-III(M3A-2170) Board
*
- * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
- * Hitoshi Yamamoto, Mamoru Sakugawa
+ * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
+ * Hitoshi Yamamoto, Mamoru Sakugawa
*/
#include <linux/config.h>
#endif /* CONFIG_M32R_CFC */
}
+#if defined(CONFIG_SMC91X)
+
#define LAN_IOSTART 0x300
#define LAN_IOEND 0x320
static struct resource smc91x_resources[] = {
.resource = smc91x_resources,
};
+#endif
+
+#if defined(CONFIG_FB_S1D13XXX)
+
+#include <video/s1d13xxxfb.h>
+#include <asm/s1d13806.h>
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+ .initregs = s1d13xxxfb_initregs,
+ .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
+ .platform_init_video = NULL,
+#ifdef CONFIG_PM
+ .platform_suspend_video = NULL,
+ .platform_resume_video = NULL,
+#endif
+};
+
+static struct resource s1d13xxxfb_resources[] = {
+ [0] = {
+ .start = 0x1d600000UL,
+ .end = 0x1d73FFFFUL,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x1d400000UL,
+ .end = 0x1d4001FFUL,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device s1d13xxxfb_device = {
+ .name = S1D_DEVICENAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &s1d13xxxfb_data,
+ },
+ .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
+ .resource = s1d13xxxfb_resources,
+};
+#endif
+
static int __init platform_init(void)
{
+#if defined(CONFIG_SMC91X)
platform_device_register(&smc91x_device);
+#endif
+#if defined(CONFIG_FB_S1D13XXX)
+ platform_device_register(&s1d13xxxfb_device);
+#endif
return 0;
}
arch_initcall(platform_init);
*
* Setup routines for OAKS32R Board
*
- * Copyright (c) 2002-2004 Hiroyuki Kondo, Hirokazu Takata,
- * Hitoshi Yamamoto, Mamoru Sakugawa
+ * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata,
+ * Hitoshi Yamamoto, Mamoru Sakugawa
*/
#include <linux/config.h>
icu_data[M32R_IRQ_SIO1_S].icucr = 0;
disable_oaks32r_irq(M32R_IRQ_SIO1_S);
#endif /* CONFIG_SERIAL_M32R_SIO */
-
}
*
* Setup routines for Renesas OPSPUT Board
*
- * Copyright (c) 2002-2004
+ * Copyright (c) 2002-2005
* Hiroyuki Kondo, Hirokazu Takata,
* Hitoshi Yamamoto, Takeo Takahashi, Mamoru Sakugawa
*
icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
enable_opsput_irq(M32R_IRQ_INT2);
-//#if defined(CONFIG_VIDEO_M32R_AR)
+#if defined(CONFIG_VIDEO_M32R_AR)
/*
* INT3# is used for AR
*/
irq_desc[M32R_IRQ_INT3].depth = 1;
icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
disable_opsput_irq(M32R_IRQ_INT3);
-//#endif /* CONFIG_VIDEO_M32R_AR */
+#endif /* CONFIG_VIDEO_M32R_AR */
}
+#if defined(CONFIG_SMC91X)
+
#define LAN_IOSTART 0x300
#define LAN_IOEND 0x320
static struct resource smc91x_resources[] = {
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
+#endif
+
+#if defined(CONFIG_FB_S1D13XXX)
+
+#include <video/s1d13xxxfb.h>
+#include <asm/s1d13806.h>
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+ .initregs = s1d13xxxfb_initregs,
+ .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
+ .platform_init_video = NULL,
+#ifdef CONFIG_PM
+ .platform_suspend_video = NULL,
+ .platform_resume_video = NULL,
+#endif
+};
+
+static struct resource s1d13xxxfb_resources[] = {
+ [0] = {
+ .start = 0x10600000UL,
+ .end = 0x1073FFFFUL,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x10400000UL,
+ .end = 0x104001FFUL,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device s1d13xxxfb_device = {
+ .name = S1D_DEVICENAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &s1d13xxxfb_data,
+ },
+ .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
+ .resource = s1d13xxxfb_resources,
+};
+#endif
static int __init platform_init(void)
{
+#if defined(CONFIG_SMC91X)
platform_device_register(&smc91x_device);
+#endif
+#if defined(CONFIG_FB_S1D13XXX)
+ platform_device_register(&s1d13xxxfb_device);
+#endif
return 0;
}
arch_initcall(platform_init);
return offset;
}
-static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state)
+static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
{
/* Ok, this could be made a bit smarter, but let's be robust for now. We
* always force a speed change to high speed before sleep, to make sure
#endif
struct cpu_spec cpu_specs[] = {
- { /* Power3 */
- 0xffff0000, 0x00400000, "POWER3 (630)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* Power3+ */
- 0xffff0000, 0x00410000, "POWER3 (630+)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* Northstar */
- 0xffff0000, 0x00330000, "RS64-II (northstar)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* Pulsar */
- 0xffff0000, 0x00340000, "RS64-III (pulsar)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* I-star */
- 0xffff0000, 0x00360000, "RS64-III (icestar)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* S-star */
- 0xffff0000, 0x00370000, "RS64-IV (sstar)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_IABR | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power3,
- COMMON_PPC64_FW
- },
- { /* Power4 */
- 0xffff0000, 0x00350000, "POWER4 (gp)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power4,
- COMMON_PPC64_FW
- },
- { /* Power4+ */
- 0xffff0000, 0x00380000, "POWER4+ (gq)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power4,
- COMMON_PPC64_FW
- },
- { /* PPC970 */
- 0xffff0000, 0x00390000, "PPC970",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP,
- 128, 128,
- __setup_cpu_ppc970,
- COMMON_PPC64_FW
- },
- { /* PPC970FX */
- 0xffff0000, 0x003c0000, "PPC970FX",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
- COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP,
- 128, 128,
- __setup_cpu_ppc970,
- COMMON_PPC64_FW
- },
- { /* Power5 */
- 0xffff0000, 0x003a0000, "POWER5 (gr)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
- CPU_FTR_MMCRA_SIHV,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power4,
- COMMON_PPC64_FW
- },
- { /* Power5 */
- 0xffff0000, 0x003b0000, "POWER5 (gs)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
- CPU_FTR_MMCRA_SIHV,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power4,
- COMMON_PPC64_FW
- },
- { /* BE DD1.x */
- 0xffff0000, 0x00700000, "Broadband Engine",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_SMT,
- COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP,
- 128, 128,
- __setup_cpu_be,
- COMMON_PPC64_FW
- },
- { /* default match */
- 0x00000000, 0x00000000, "POWER4 (compatible)",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
- CPU_FTR_PPCAS_ARCH_V2,
- COMMON_USER_PPC64,
- 128, 128,
- __setup_cpu_power4,
- COMMON_PPC64_FW
- }
+ { /* Power3 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00400000,
+ .cpu_name = "POWER3 (630)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Power3+ */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00410000,
+ .cpu_name = "POWER3 (630+)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Northstar */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00330000,
+ .cpu_name = "RS64-II (northstar)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Pulsar */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00340000,
+ .cpu_name = "RS64-III (pulsar)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* I-star */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00360000,
+ .cpu_name = "RS64-III (icestar)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* S-star */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00370000,
+ .cpu_name = "RS64-IV (sstar)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
+ CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power3,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Power4 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00350000,
+ .cpu_name = "POWER4 (gp)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power4,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Power4+ */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00380000,
+ .cpu_name = "POWER4+ (gq)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power4,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* PPC970 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00390000,
+ .cpu_name = "PPC970",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
+ CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
+ .cpu_user_features = COMMON_USER_PPC64 |
+ PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_ppc970,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* PPC970FX */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x003c0000,
+ .cpu_name = "PPC970FX",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
+ CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA,
+ .cpu_user_features = COMMON_USER_PPC64 |
+ PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_ppc970,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Power5 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x003a0000,
+ .cpu_name = "POWER5 (gr)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
+ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
+ CPU_FTR_MMCRA_SIHV,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power4,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* Power5 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x003b0000,
+ .cpu_name = "POWER5 (gs)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA | CPU_FTR_SMT |
+ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
+ CPU_FTR_MMCRA_SIHV,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power4,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* BE DD1.x */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00700000,
+ .cpu_name = "Broadband Engine",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
+ CPU_FTR_SMT,
+ .cpu_user_features = COMMON_USER_PPC64 |
+ PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_be,
+ .firmware_features = COMMON_PPC64_FW,
+ },
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "POWER4 (compatible)",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+ CPU_FTR_PPCAS_ARCH_V2,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .cpu_setup = __setup_cpu_power4,
+ .firmware_features = COMMON_PPC64_FW,
+ }
};
firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = {
- {FW_FEATURE_PFT, "hcall-pft"},
- {FW_FEATURE_TCE, "hcall-tce"},
- {FW_FEATURE_SPRG0, "hcall-sprg0"},
- {FW_FEATURE_DABR, "hcall-dabr"},
- {FW_FEATURE_COPY, "hcall-copy"},
- {FW_FEATURE_ASR, "hcall-asr"},
- {FW_FEATURE_DEBUG, "hcall-debug"},
- {FW_FEATURE_PERF, "hcall-perf"},
- {FW_FEATURE_DUMP, "hcall-dump"},
- {FW_FEATURE_INTERRUPT, "hcall-interrupt"},
- {FW_FEATURE_MIGRATE, "hcall-migrate"},
- {FW_FEATURE_PERFMON, "hcall-perfmon"},
- {FW_FEATURE_CRQ, "hcall-crq"},
- {FW_FEATURE_VIO, "hcall-vio"},
- {FW_FEATURE_RDMA, "hcall-rdma"},
- {FW_FEATURE_LLAN, "hcall-lLAN"},
- {FW_FEATURE_BULK, "hcall-bulk"},
- {FW_FEATURE_XDABR, "hcall-xdabr"},
- {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
- {FW_FEATURE_SPLPAR, "hcall-splpar"},
+ {FW_FEATURE_PFT, "hcall-pft"},
+ {FW_FEATURE_TCE, "hcall-tce"},
+ {FW_FEATURE_SPRG0, "hcall-sprg0"},
+ {FW_FEATURE_DABR, "hcall-dabr"},
+ {FW_FEATURE_COPY, "hcall-copy"},
+ {FW_FEATURE_ASR, "hcall-asr"},
+ {FW_FEATURE_DEBUG, "hcall-debug"},
+ {FW_FEATURE_PERF, "hcall-perf"},
+ {FW_FEATURE_DUMP, "hcall-dump"},
+ {FW_FEATURE_INTERRUPT, "hcall-interrupt"},
+ {FW_FEATURE_MIGRATE, "hcall-migrate"},
+ {FW_FEATURE_PERFMON, "hcall-perfmon"},
+ {FW_FEATURE_CRQ, "hcall-crq"},
+ {FW_FEATURE_VIO, "hcall-vio"},
+ {FW_FEATURE_RDMA, "hcall-rdma"},
+ {FW_FEATURE_LLAN, "hcall-lLAN"},
+ {FW_FEATURE_BULK, "hcall-bulk"},
+ {FW_FEATURE_XDABR, "hcall-xdabr"},
+ {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
+ {FW_FEATURE_SPLPAR, "hcall-splpar"},
};
label##_pSeries: \
HMT_MEDIUM; \
mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define STD_EXCEPTION_ISERIES(n, label, area) \
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(area); \
EXCEPTION_PROLOG_ISERIES_2; \
b label##_common
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
lbz r10,PACAPROCENABLED(r13); \
cmpwi 0,r10,0; \
_machine_check_pSeries:
HMT_MEDIUM
mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
data_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRG1,r13
+ RUNLATCH_ON(r13)
mfspr r13,SPRG3 /* get paca address into r13 */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
std r10,PACA_EXSLB+EX_R10(r13)
instruction_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRG1,r13
+ RUNLATCH_ON(r13)
mfspr r13,SPRG3 /* get paca address into r13 */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
std r10,PACA_EXSLB+EX_R10(r13)
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
+ RUNLATCH_ON(r9)
mr r9,r13
mfmsr r10
mfspr r13,SPRG3
system_reset_fwnmi:
HMT_MEDIUM
mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
machine_check_fwnmi:
HMT_MEDIUM
mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
/*
.align 7
.globl data_access_common
data_access_common:
+ RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
mfspr r10,DAR
std r10,PACA_EXGEN+EX_DAR(r13)
mfspr r10,DSISR
#include <linux/module.h>
#include <asm/hvcall.h>
#include <asm/hvconsole.h>
-#include <asm/prom.h>
/**
* hvc_get_chars - retrieve characters from firmware for denoted vterm adatper
unsigned long got;
if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got,
- (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) {
- /*
- * Work around a HV bug where it gives us a null
- * after every \r. -- paulus
- */
- if (got > 0) {
- int i;
- for (i = 1; i < got; ++i) {
- if (buf[i] == 0 && buf[i-1] == '\r') {
- --got;
- if (i < got)
- memmove(&buf[i], &buf[i+1],
- got - i);
- }
- }
- }
+ (unsigned long *)buf, (unsigned long *)buf+1) == H_Success)
return got;
- }
return 0;
}
EXPORT_SYMBOL(hvc_get_chars);
+
/**
* hvc_put_chars: send characters to firmware for denoted vterm adapter
* @vtermno: The vtermno or unit_address of the adapter from which the data
}
EXPORT_SYMBOL(hvc_put_chars);
-
-/*
- * We hope/assume that the first vty found corresponds to the first console
- * device.
- */
-int hvc_find_vtys(void)
-{
- struct device_node *vty;
- int num_found = 0;
-
- for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
- vty = of_find_node_by_name(vty, "vty")) {
- uint32_t *vtermno;
-
- /* We have statically defined space for only a certain number of
- * console adapters. */
- if (num_found >= MAX_NR_HVC_CONSOLES)
- break;
-
- vtermno = (uint32_t *)get_property(vty, "reg", NULL);
- if (!vtermno)
- continue;
-
- if (device_is_compatible(vty, "hvterm1")) {
- hvc_instantiate(*vtermno, num_found);
- ++num_found;
- }
- }
-
- return num_found;
-}
late_initcall(iSeries_src_init);
+static inline void process_iSeries_events(void)
+{
+ asm volatile ("li 0,0x5555; sc" : : : "r0", "r3");
+}
+
+static void yield_shared_processor(void)
+{
+ unsigned long tb;
+
+ HvCall_setEnabledInterrupts(HvCall_MaskIPI |
+ HvCall_MaskLpEvent |
+ HvCall_MaskLpProd |
+ HvCall_MaskTimeout);
+
+ tb = get_tb();
+ /* Compute future tb value when yield should expire */
+ HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy);
+
+ /*
+ * The decrementer stops during the yield. Force a fake decrementer
+ * here and let the timer_interrupt code sort out the actual time.
+ */
+ get_paca()->lppaca.int_dword.fields.decr_int = 1;
+ process_iSeries_events();
+}
+
+static int iseries_shared_idle(void)
+{
+ while (1) {
+ while (!need_resched() && !hvlpevent_is_pending()) {
+ local_irq_disable();
+ ppc64_runlatch_off();
+
+ /* Recheck with irqs off */
+ if (!need_resched() && !hvlpevent_is_pending())
+ yield_shared_processor();
+
+ HMT_medium();
+ local_irq_enable();
+ }
+
+ ppc64_runlatch_on();
+
+ if (hvlpevent_is_pending())
+ process_iSeries_events();
+
+ schedule();
+ }
+
+ return 0;
+}
+
+static int iseries_dedicated_idle(void)
+{
+ long oldval;
+
+ while (1) {
+ oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
+
+ if (!oldval) {
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ while (!need_resched()) {
+ ppc64_runlatch_off();
+ HMT_low();
+
+ if (hvlpevent_is_pending()) {
+ HMT_medium();
+ ppc64_runlatch_on();
+ process_iSeries_events();
+ }
+ }
+
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ } else {
+ set_need_resched();
+ }
+
+ ppc64_runlatch_on();
+ schedule();
+ }
+
+ return 0;
+}
+
#ifndef CONFIG_PCI
void __init iSeries_init_IRQ(void) { }
#endif
ppc_md.get_rtc_time = iSeries_get_rtc_time;
ppc_md.calibrate_decr = iSeries_calibrate_decr;
ppc_md.progress = iSeries_progress;
+
+ if (get_paca()->lppaca.shared_proc) {
+ ppc_md.idle_loop = iseries_shared_idle;
+ printk(KERN_INFO "Using shared processor idle loop\n");
+ } else {
+ ppc_md.idle_loop = iseries_dedicated_idle;
+ printk(KERN_INFO "Using dedicated idle loop\n");
+ }
}
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/cpu.h>
-#include <linux/module.h>
#include <linux/sysctl.h>
-#include <linux/smp.h>
#include <asm/system.h>
#include <asm/processor.h>
-#include <asm/mmu.h>
#include <asm/cputable.h>
#include <asm/time.h>
-#include <asm/iSeries/HvCall.h>
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/plpar_wrappers.h>
#include <asm/systemcfg.h>
+#include <asm/machdep.h>
extern void power4_idle(void);
-static int (*idle_loop)(void);
-
-#ifdef CONFIG_PPC_ISERIES
-static unsigned long maxYieldTime = 0;
-static unsigned long minYieldTime = 0xffffffffffffffffUL;
-
-static inline void process_iSeries_events(void)
-{
- asm volatile ("li 0,0x5555; sc" : : : "r0", "r3");
-}
-
-static void yield_shared_processor(void)
-{
- unsigned long tb;
- unsigned long yieldTime;
-
- HvCall_setEnabledInterrupts(HvCall_MaskIPI |
- HvCall_MaskLpEvent |
- HvCall_MaskLpProd |
- HvCall_MaskTimeout);
-
- tb = get_tb();
- /* Compute future tb value when yield should expire */
- HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy);
-
- yieldTime = get_tb() - tb;
- if (yieldTime > maxYieldTime)
- maxYieldTime = yieldTime;
-
- if (yieldTime < minYieldTime)
- minYieldTime = yieldTime;
-
- /*
- * The decrementer stops during the yield. Force a fake decrementer
- * here and let the timer_interrupt code sort out the actual time.
- */
- get_paca()->lppaca.int_dword.fields.decr_int = 1;
- process_iSeries_events();
-}
-
-static int iSeries_idle(void)
-{
- struct paca_struct *lpaca;
- long oldval;
-
- /* ensure iSeries run light will be out when idle */
- ppc64_runlatch_off();
-
- lpaca = get_paca();
-
- while (1) {
- if (lpaca->lppaca.shared_proc) {
- if (hvlpevent_is_pending())
- process_iSeries_events();
- if (!need_resched())
- yield_shared_processor();
- } else {
- oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
-
- if (!oldval) {
- set_thread_flag(TIF_POLLING_NRFLAG);
-
- while (!need_resched()) {
- HMT_medium();
- if (hvlpevent_is_pending())
- process_iSeries_events();
- HMT_low();
- }
-
- HMT_medium();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- } else {
- set_need_resched();
- }
- }
-
- ppc64_runlatch_on();
- schedule();
- ppc64_runlatch_off();
- }
-
- return 0;
-}
-
-#else
-
-static int default_idle(void)
+int default_idle(void)
{
long oldval;
unsigned int cpu = smp_processor_id();
set_thread_flag(TIF_POLLING_NRFLAG);
while (!need_resched() && !cpu_is_offline(cpu)) {
- barrier();
+ ppc64_runlatch_off();
+
/*
* Go into low thread priority and possibly
* low power mode.
set_need_resched();
}
+ ppc64_runlatch_on();
schedule();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
return 0;
}
-#ifdef CONFIG_PPC_PSERIES
-
-DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
-
-int dedicated_idle(void)
+int native_idle(void)
{
- long oldval;
- struct paca_struct *lpaca = get_paca(), *ppaca;
- unsigned long start_snooze;
- unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
- unsigned int cpu = smp_processor_id();
-
- ppaca = &paca[cpu ^ 1];
-
while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- lpaca->lppaca.idle = 1;
-
- oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
- if (!oldval) {
- set_thread_flag(TIF_POLLING_NRFLAG);
- start_snooze = __get_tb() +
- *smt_snooze_delay * tb_ticks_per_usec;
- while (!need_resched() && !cpu_is_offline(cpu)) {
- /*
- * Go into low thread priority and possibly
- * low power mode.
- */
- HMT_low();
- HMT_very_low();
-
- if (*smt_snooze_delay == 0 ||
- __get_tb() < start_snooze)
- continue;
-
- HMT_medium();
-
- if (!(ppaca->lppaca.idle)) {
- local_irq_disable();
-
- /*
- * We are about to sleep the thread
- * and so wont be polling any
- * more.
- */
- clear_thread_flag(TIF_POLLING_NRFLAG);
-
- /*
- * SMT dynamic mode. Cede will result
- * in this thread going dormant, if the
- * partner thread is still doing work.
- * Thread wakes up if partner goes idle,
- * an interrupt is presented, or a prod
- * occurs. Returning from the cede
- * enables external interrupts.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
- } else {
- /*
- * Give the HV an opportunity at the
- * processor, since we are not doing
- * any work.
- */
- poll_pending();
- }
- }
-
- clear_thread_flag(TIF_POLLING_NRFLAG);
- } else {
- set_need_resched();
- }
-
- HMT_medium();
- lpaca->lppaca.idle = 0;
- schedule();
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- }
- return 0;
-}
-
-static int shared_idle(void)
-{
- struct paca_struct *lpaca = get_paca();
- unsigned int cpu = smp_processor_id();
-
- while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- lpaca->lppaca.idle = 1;
+ ppc64_runlatch_off();
- while (!need_resched() && !cpu_is_offline(cpu)) {
- local_irq_disable();
+ if (!need_resched())
+ power4_idle();
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- *
- * Check need_resched() again with interrupts disabled
- * to avoid a race.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
+ if (need_resched()) {
+ ppc64_runlatch_on();
+ schedule();
}
- HMT_medium();
- lpaca->lppaca.idle = 0;
- schedule();
if (cpu_is_offline(smp_processor_id()) &&
system_state == SYSTEM_RUNNING)
cpu_die();
return 0;
}
-#endif /* CONFIG_PPC_PSERIES */
-
-static int native_idle(void)
-{
- while(1) {
- /* check CPU type here */
- if (!need_resched())
- power4_idle();
- if (need_resched())
- schedule();
-
- if (cpu_is_offline(raw_smp_processor_id()) &&
- system_state == SYSTEM_RUNNING)
- cpu_die();
- }
- return 0;
-}
-
-#endif /* CONFIG_PPC_ISERIES */
-
void cpu_idle(void)
{
- idle_loop();
+ BUG_ON(NULL == ppc_md.idle_loop);
+ ppc_md.idle_loop();
}
int powersave_nap;
}
__initcall(register_powersave_nap_sysctl);
#endif
-
-int idle_setup(void)
-{
- /*
- * Move that junk to each platform specific file, eventually define
- * a pSeries_idle for shared processor stuff
- */
-#ifdef CONFIG_PPC_ISERIES
- idle_loop = iSeries_idle;
- return 1;
-#else
- idle_loop = default_idle;
-#endif
-#ifdef CONFIG_PPC_PSERIES
- if (systemcfg->platform & PLATFORM_PSERIES) {
- if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
- if (get_paca()->lppaca.shared_proc) {
- printk(KERN_INFO "Using shared processor idle loop\n");
- idle_loop = shared_idle;
- } else {
- printk(KERN_INFO "Using dedicated idle loop\n");
- idle_loop = dedicated_idle;
- }
- } else {
- printk(KERN_INFO "Using default idle loop\n");
- idle_loop = default_idle;
- }
- }
-#endif /* CONFIG_PPC_PSERIES */
-#ifndef CONFIG_PPC_ISERIES
- if (systemcfg->platform == PLATFORM_POWERMAC ||
- systemcfg->platform == PLATFORM_MAPLE) {
- printk(KERN_INFO "Using native/NAP idle loop\n");
- idle_loop = native_idle;
- }
-#endif /* CONFIG_PPC_ISERIES */
-
- return 1;
-}
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+
+ printk(KERN_INFO "Using native/NAP idle loop\n");
}
/*
.get_rtc_time = maple_get_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
+ .idle_loop = native_idle,
};
.llong .compat_sys_mq_getsetattr
.llong .compat_sys_kexec_load
.llong .sys32_add_key
- .llong .sys32_request_key
+ .llong .sys32_request_key /* 270 */
.llong .compat_sys_keyctl
.llong .compat_sys_waitid
+ .llong .sys32_ioprio_set
+ .llong .sys32_ioprio_get
.balign 8
_GLOBAL(sys_call_table)
.llong .sys_request_key /* 270 */
.llong .sys_keyctl
.llong .sys_waitid
+ .llong .sys_ioprio_set
+ .llong .sys_ioprio_get
#undef DEBUG
#include <linux/config.h>
+#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
extern void pSeries_system_reset_exception(struct pt_regs *regs);
extern int pSeries_machine_check_exception(struct pt_regs *regs);
+static int pseries_shared_idle(void);
+static int pseries_dedicated_idle(void);
+
static volatile void __iomem * chrp_int_ack_special;
struct mpic *pSeries_mpic;
if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR)
vpa_init(boot_cpuid);
+
+ /* Choose an idle loop */
+ if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
+ if (get_paca()->lppaca.shared_proc) {
+ printk(KERN_INFO "Using shared processor idle loop\n");
+ ppc_md.idle_loop = pseries_shared_idle;
+ } else {
+ printk(KERN_INFO "Using dedicated idle loop\n");
+ ppc_md.idle_loop = pseries_dedicated_idle;
+ }
+ } else {
+ printk(KERN_INFO "Using default idle loop\n");
+ ppc_md.idle_loop = default_idle;
+ }
}
static int __init pSeries_init_panel(void)
return 1;
}
+DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
+
+static inline void dedicated_idle_sleep(unsigned int cpu)
+{
+ struct paca_struct *ppaca = &paca[cpu ^ 1];
+
+ /* Only sleep if the other thread is not idle */
+ if (!(ppaca->lppaca.idle)) {
+ local_irq_disable();
+
+ /*
+ * We are about to sleep the thread and so wont be polling any
+ * more.
+ */
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+
+ /*
+ * SMT dynamic mode. Cede will result in this thread going
+ * dormant, if the partner thread is still doing work. Thread
+ * wakes up if partner goes idle, an interrupt is presented, or
+ * a prod occurs. Returning from the cede enables external
+ * interrupts.
+ */
+ if (!need_resched())
+ cede_processor();
+ else
+ local_irq_enable();
+ } else {
+ /*
+ * Give the HV an opportunity at the processor, since we are
+ * not doing any work.
+ */
+ poll_pending();
+ }
+}
+
+static int pseries_dedicated_idle(void)
+{
+ long oldval;
+ struct paca_struct *lpaca = get_paca();
+ unsigned int cpu = smp_processor_id();
+ unsigned long start_snooze;
+ unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
+
+ while (1) {
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ lpaca->lppaca.idle = 1;
+
+ oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
+ if (!oldval) {
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ start_snooze = __get_tb() +
+ *smt_snooze_delay * tb_ticks_per_usec;
+
+ while (!need_resched() && !cpu_is_offline(cpu)) {
+ ppc64_runlatch_off();
+
+ /*
+ * Go into low thread priority and possibly
+ * low power mode.
+ */
+ HMT_low();
+ HMT_very_low();
+
+ if (*smt_snooze_delay != 0 &&
+ __get_tb() > start_snooze) {
+ HMT_medium();
+ dedicated_idle_sleep(cpu);
+ }
+
+ }
+
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ } else {
+ set_need_resched();
+ }
+
+ lpaca->lppaca.idle = 0;
+ ppc64_runlatch_on();
+
+ schedule();
+
+ if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
+ cpu_die();
+ }
+}
+
+static int pseries_shared_idle(void)
+{
+ struct paca_struct *lpaca = get_paca();
+ unsigned int cpu = smp_processor_id();
+
+ while (1) {
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ lpaca->lppaca.idle = 1;
+
+ while (!need_resched() && !cpu_is_offline(cpu)) {
+ local_irq_disable();
+ ppc64_runlatch_off();
+
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ *
+ * Check need_resched() again with interrupts disabled
+ * to avoid a race.
+ */
+ if (!need_resched())
+ cede_processor();
+ else
+ local_irq_enable();
+
+ HMT_medium();
+ }
+
+ lpaca->lppaca.idle = 0;
+ ppc64_runlatch_on();
+
+ schedule();
+
+ if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
+ cpu_die();
+ }
+
+ return 0;
+}
+
struct machdep_calls __initdata pSeries_md = {
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+
+ printk(KERN_INFO "Using native/NAP idle loop\n");
}
#ifdef CONFIG_SCSI
.calibrate_decr = pmac_calibrate_decr,
.feature_call = pmac_do_feature_call,
.progress = pmac_progress,
- .check_legacy_ioport = pmac_check_legacy_ioport
+ .check_legacy_ioport = pmac_check_legacy_ioport,
+ .idle_loop = native_idle,
};
extern unsigned long klimit;
extern void mm_init_ppc64(void);
-extern int idle_setup(void);
extern void stab_initialize(unsigned long stab);
extern void htab_initialize(void);
extern void early_init_devtree(void *flat_dt);
ppc_md.setup_arch();
- /* Select the correct idle loop for the platform. */
- idle_setup();
+ /* Use the default idle loop if the platform hasn't provided one. */
+ if (NULL == ppc_md.idle_loop) {
+ ppc_md.idle_loop = default_idle;
+ printk(KERN_INFO "Using default idle loop\n");
+ }
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
-#include <linux/slab.h>
-#include <linux/uio.h>
-#include <linux/aio.h>
-#include <linux/nfs_fs.h>
-#include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
#include <linux/poll.h>
#include <linux/personality.h>
#include <linux/stat.h>
-#include <linux/filter.h>
-#include <linux/highmem.h>
-#include <linux/highuid.h>
#include <linux/mman.h>
-#include <linux/ipv6.h>
#include <linux/in.h>
-#include <linux/icmpv6.h>
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/sysctl.h>
#include <linux/binfmts.h>
-#include <linux/dnotify.h>
#include <linux/security.h>
#include <linux/compat.h>
#include <linux/ptrace.h>
-#include <linux/aio_abi.h>
#include <linux/elf.h>
-#include <net/scm.h>
-#include <net/sock.h>
-
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/ipc.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/semaphore.h>
-#include <asm/ppcdebug.h>
#include <asm/time.h>
#include <asm/mmu_context.h>
#include <asm/systemcfg.h>
return ret;
}
-
-/* These are here just in case some old sparc32 binary calls it. */
asmlinkage long sys32_pause(void)
{
current->state = TASK_INTERRUPTIBLE;
return -ERESTARTNOHAND;
}
-
-
static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
{
long usec;
}
-/* Note: it is necessary to treat which and who as unsigned ints,
- * with the corresponding cast to a signed int to insure that the
- * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
- * and the register representation of a signed int (msr in 64-bit mode) is performed.
- */
-asmlinkage long sys32_getpriority(u32 which, u32 who)
-{
- return sys_getpriority((int)which, (int)who);
-}
-
/* Note: it is necessary to treat pid as an unsigned int,
* with the corresponding cast to a signed int to insure that the
return sys_setpgid((int)pid, (int)pgid);
}
+long sys32_getpriority(u32 which, u32 who)
+{
+ /* sign extend which and who */
+ return sys_getpriority((int)which, (int)who);
+}
long sys32_setpriority(u32 which, u32 who, u32 niceval)
{
return sys_setpriority((int)which, (int)who, (int)niceval);
}
+long sys32_ioprio_get(u32 which, u32 who)
+{
+ /* sign extend which and who */
+ return sys_ioprio_get((int)which, (int)who);
+}
+
+long sys32_ioprio_set(u32 which, u32 who, u32 ioprio)
+{
+ /* sign extend which, who and ioprio */
+ return sys_ioprio_set((int)which, (int)who, (int)ioprio);
+}
+
/* Note: it is necessary to treat newmask as an unsigned int,
* with the corresponding cast to a signed int to insure that the
* proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
(u64)len_high << 32 | len_low, advice);
}
-extern asmlinkage long sys_timer_create(clockid_t, sigevent_t __user *, timer_t __user *);
-
long ppc32_timer_create(clockid_t clock,
struct compat_sigevent __user *ev32,
timer_t __user *timer_id)
unsigned long hid0;
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
- int ret;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
case PLATFORM_PSERIES_LPAR:
set = 1UL << 63;
reset = 0;
- ret = plpar_hcall_norets(H_PERFMON, set, reset);
- if (ret)
- printk(KERN_ERR "H_PERFMON call on cpu %u "
- "returned %d\n",
- smp_processor_id(), ret);
+ plpar_hcall_norets(H_PERFMON, set, reset);
break;
#endif /* CONFIG_PPC_PSERIES */
/* instruct hypervisor to maintain PMCs */
if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR)
get_paca()->lppaca.pmcregs_in_use = 1;
-
- /*
- * On SMT machines we have to set the run latch in the ctrl register
- * in order to make PMC6 spin.
- */
- if (cpu_has_feature(CPU_FTR_SMT))
- ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}
.gcc_except_table : { *(.gcc_except_table) }
.fixup : { *(.fixup) }
- .got ALIGN(4) : { *(.got.plt) *(.got) }
-
.dynamic : { *(.dynamic) } :text :dynamic
+ .got : { *(.got) }
+ .plt : { *(.plt) }
_end = .;
__end = .;
config HPPFS
tristate "HoneyPot ProcFS (EXPERIMENTAL)"
- depends on BROKEN
help
hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
entries to be overridden, removed, or fabricated from the host.
You only need this if you are setting up a UML honeypot. Otherwise,
it is safe to say 'N' here.
- If you are actively using it, please ask for it to be fixed. In this
- moment, it does not work on 2.6 (it works somehow on 2.4).
+ If you are actively using it, please report any problems, since it's
+ getting fixed. In this moment, it is experimental on 2.6 (it works on
+ 2.4).
config MCONSOLE
bool "Management console"
memory. All the memory that can't be mapped directly will be treated
as high memory.
+config STUB_CODE
+ hex
+ default 0xbfffe000
+
+config STUB_DATA
+ hex
+ default 0xbffff000
+
+config STUB_START
+ hex
+ default STUB_CODE
+
config ARCH_HAS_SC_SIGNALS
bool
default y
bool
default y
+config STUB_CODE
+ hex
+ default 0x7fbfffe000
+
+config STUB_DATA
+ hex
+ default 0x7fbffff000
+
+config STUB_START
+ hex
+ default STUB_CODE
+
config ARCH_HAS_SC_SIGNALS
bool
default n
endif
endif
-CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH)
+CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) $(STUB_CFLAGS)
ARCH_USER_CFLAGS :=
ifneq ($(CONFIG_GPROF),y)
SUBARCH_LIBS := arch/um/sys-x86_64/
START := 0x60000000
-CFLAGS += -U__$(SUBARCH)__ -fno-builtin
+CFLAGS += -U__$(SUBARCH)__ -fno-builtin $(STUB_CFLAGS)
ARCH_USER_CFLAGS := -D__x86_64__
ELF_ARCH := i386:x86-64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc3-skas3-v9-pre2
-# Sun Apr 24 19:46:10 2005
+# Linux kernel version: 2.6.12-rc6-mm1
+# Tue Jun 14 18:22:21 2005
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_UML=y
#
# UML-specific options
#
-CONFIG_MODE_TT=y
+# CONFIG_MODE_TT is not set
+# CONFIG_STATIC_LINK is not set
CONFIG_MODE_SKAS=y
CONFIG_UML_X86=y
# CONFIG_64BIT is not set
CONFIG_TOP_ADDR=0xc0000000
# CONFIG_3_LEVEL_PGTABLES is not set
+CONFIG_STUB_CODE=0xbfffe000
+CONFIG_STUB_DATA=0xbffff000
+CONFIG_STUB_START=0xbfffe000
CONFIG_ARCH_HAS_SC_SIGNALS=y
CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
-CONFIG_LD_SCRIPT_STATIC=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_LD_SCRIPT_DYN=y
CONFIG_NET=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_HOSTFS=y
+# CONFIG_HOSTFS is not set
CONFIG_MCONSOLE=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_HOST_2G_2G is not set
-# CONFIG_SMP is not set
CONFIG_NEST_LEVEL=0
CONFIG_KERNEL_HALF_GIGS=1
# CONFIG_HIGHMEM is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_SOUND=m
CONFIG_HOSTAUDIO=m
CONFIG_UML_RANDOM=y
+# CONFIG_MMAPPER is not set
#
# Block devices
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=y
+CONFIG_TCP_CONG_HTCP=y
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+# CONFIG_FUSE_FS is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_PT_PROXY=y
+# CONFIG_GPROF is not set
# CONFIG_GCOV is not set
# CONFIG_SYSCALL_DEBUG is not set
return driver;
}
+static spinlock_t winch_handler_lock;
+LIST_HEAD(winch_handlers);
+
void lines_init(struct line *lines, int nlines)
{
struct line *line;
int i;
+ spin_lock_init(&winch_handler_lock);
for(i = 0; i < nlines; i++){
line = &lines[i];
INIT_LIST_HEAD(&line->chan_list);
return IRQ_HANDLED;
}
-DECLARE_MUTEX(winch_handler_sem);
-LIST_HEAD(winch_handlers);
-
void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty)
{
struct winch *winch;
- down(&winch_handler_sem);
winch = kmalloc(sizeof(*winch), GFP_KERNEL);
if (winch == NULL) {
printk("register_winch_irq - kmalloc failed\n");
- goto out;
+ return;
}
+
*winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list),
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
.tty = tty });
+
+ spin_lock(&winch_handler_lock);
list_add(&winch->list, &winch_handlers);
+ spin_unlock(&winch_handler_lock);
+
if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
"winch", winch) < 0)
printk("register_winch_irq - failed to register IRQ\n");
- out:
- up(&winch_handler_sem);
}
static void unregister_winch(struct tty_struct *tty)
struct list_head *ele;
struct winch *winch, *found = NULL;
- down(&winch_handler_sem);
+ spin_lock(&winch_handler_lock);
list_for_each(ele, &winch_handlers){
winch = list_entry(ele, struct winch, list);
if(winch->tty == tty){
break;
}
}
-
if(found == NULL)
- goto out;
+ goto err;
+
+ list_del(&winch->list);
+ spin_unlock(&winch_handler_lock);
if(winch->pid != -1)
os_kill_process(winch->pid, 1);
free_irq(WINCH_IRQ, winch);
- list_del(&winch->list);
kfree(winch);
- out:
- up(&winch_handler_sem);
+
+ return;
+err:
+ spin_unlock(&winch_handler_lock);
}
+/* XXX: No lock as it's an exitcall... is this valid? Depending on cleanup
+ * order... are we sure that nothing else is done on the list? */
static void winch_cleanup(void)
{
struct list_head *ele;
list_for_each(ele, &winch_handlers){
winch = list_entry(ele, struct winch, list);
if(winch->fd != -1){
+ /* Why is this different from the above free_irq(),
+ * which deactivates SIGIO? This searches the FD
+ * somewhere else and removes it from the list... */
deactivate_fd(winch->fd, WINCH_IRQ);
os_close_file(winch->fd);
}
extern int is_remapped(void *virt);
extern int physmem_remove_mapping(void *virt);
extern void physmem_forget_descriptor(int fd);
+extern unsigned long to_phys(void *virt);
#endif
extern void save_registers(int pid, union uml_pt_regs *regs);
extern void restore_registers(int pid, union uml_pt_regs *regs);
extern void init_registers(int pid);
+extern void get_safe_registers(unsigned long * regs);
#endif
#define PT_SYSCALL_ARG3_OFFSET PT_OFFSET(EDX)
#define PT_SYSCALL_ARG4_OFFSET PT_OFFSET(ESI)
#define PT_SYSCALL_ARG5_OFFSET PT_OFFSET(EDI)
+#define PT_SYSCALL_ARG6_OFFSET PT_OFFSET(EBP)
#define PT_SYSCALL_RET_OFFSET PT_OFFSET(EAX)
+#define REGS_SYSCALL_NR EAX /* This is used before a system call */
+#define REGS_SYSCALL_ARG1 EBX
+#define REGS_SYSCALL_ARG2 ECX
+#define REGS_SYSCALL_ARG3 EDX
+#define REGS_SYSCALL_ARG4 ESI
+#define REGS_SYSCALL_ARG5 EDI
+#define REGS_SYSCALL_ARG6 EBP
+
+#define REGS_IP_INDEX EIP
+#define REGS_SP_INDEX UESP
+
#define PT_IP_OFFSET PT_OFFSET(EIP)
#define PT_IP(regs) ((regs)[EIP])
+#define PT_SP_OFFSET PT_OFFSET(UESP)
#define PT_SP(regs) ((regs)[UESP])
#ifndef FRAME_SIZE
--- /dev/null
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <asm/ptrace.h>
+#include <asm/unistd.h>
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET EAX
+#define STUB_MMAP_NR __NR_mmap2
+#define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT)
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+ long ret;
+
+ __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx");
+ __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx");
+ __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax");
+ __asm__("int $0x80;" : : : "%eax");
+ __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :);
+ return(ret);
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+ __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx");
+ return(stub_syscall2(syscall, arg1, arg2));
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+ long arg4)
+{
+ __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi");
+ return(stub_syscall3(syscall, arg1, arg2, arg3));
+}
+
+static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3,
+ long arg4, long arg5, long arg6)
+{
+ long ret;
+ __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax");
+ __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx");
+ __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx");
+ __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx");
+ __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi");
+ __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi");
+ __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; "
+ "int $0x80; popl %%ebp ; "
+ "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax");
+ return(ret);
+}
+
+static inline void trap_myself(void)
+{
+ __asm("int3");
+}
+
+#endif
#define PTRACE_OLDSETOPTIONS 21
#endif
+/* These are before the system call, so the the system call number is RAX
+ * rather than ORIG_RAX, and arg4 is R10 rather than RCX
+ */
+#define REGS_SYSCALL_NR PT_INDEX(RAX)
+#define REGS_SYSCALL_ARG1 PT_INDEX(RDI)
+#define REGS_SYSCALL_ARG2 PT_INDEX(RSI)
+#define REGS_SYSCALL_ARG3 PT_INDEX(RDX)
+#define REGS_SYSCALL_ARG4 PT_INDEX(R10)
+#define REGS_SYSCALL_ARG5 PT_INDEX(R8)
+#define REGS_SYSCALL_ARG6 PT_INDEX(R9)
+
+#define REGS_IP_INDEX PT_INDEX(RIP)
+#define REGS_SP_INDEX PT_INDEX(RSP)
+
#endif
/*
--- /dev/null
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <asm/ptrace.h>
+#include <asm/unistd.h>
+#include <sysdep/ptrace_user.h>
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET PT_INDEX(RAX)
+#define STUB_MMAP_NR __NR_mmap
+#define MMAP_OFFSET(o) (o)
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+ long ret;
+
+ __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi");
+ __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi");
+ __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax");
+ __asm__("syscall;" : : : "%rax", "%r11", "%rcx");
+ __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :);
+ return(ret);
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+ __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx");
+ return(stub_syscall2(syscall, arg1, arg2));
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+ long arg4)
+{
+ __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10");
+ return(stub_syscall3(syscall, arg1, arg2, arg3));
+}
+
+static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3,
+ long arg4, long arg5, long arg6)
+{
+ __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9");
+ __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8");
+ return(stub_syscall4(syscall, arg1, arg2, arg3, arg4));
+}
+
+static inline void trap_myself(void)
+{
+ __asm("int3");
+}
+
+#endif
extern void switch_timers(int to_real);
extern void idle_sleep(int secs);
extern void enable_timer(void);
+extern void prepare_timer(void * ptr);
extern void disable_timer(void);
extern unsigned long time_lock(void);
extern void time_unlock(unsigned long);
extern void mprotect_kernel_vm(int w);
extern void force_flush_all(void);
extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
- unsigned long end_addr, int force, int data,
- void (*do_ops)(int, struct host_vm_op *, int));
+ unsigned long end_addr, int force,
+ void (*do_ops)(union mm_context *,
+ struct host_vm_op *, int));
extern int flush_tlb_kernel_range_common(unsigned long start,
unsigned long end);
extern int add_mmap(unsigned long virt, unsigned long phys, unsigned long len,
int r, int w, int x, struct host_vm_op *ops, int index,
- int last_filled, int data,
- void (*do_ops)(int, struct host_vm_op *, int));
+ int last_filled, union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *,
+ int));
extern int add_munmap(unsigned long addr, unsigned long len,
struct host_vm_op *ops, int index, int last_filled,
- int data, void (*do_ops)(int, struct host_vm_op *, int));
+ union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *,
+ int));
extern int add_mprotect(unsigned long addr, unsigned long len, int r, int w,
int x, struct host_vm_op *ops, int index,
- int last_filled, int data,
- void (*do_ops)(int, struct host_vm_op *, int));
+ int last_filled, union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *,
+ int));
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
*(.stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
+
+ . = ALIGN(4096);
+ __syscall_stub_start = .;
+ *(.__syscall_stub*)
+ __syscall_stub_end = .;
+ . = ALIGN(4096);
} =0x90909090
.fini : {
KEEP (*(.fini))
#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+extern int __syscall_stub_start, __binary_start;
+
void setup_physmem(unsigned long start, unsigned long reserve_end,
unsigned long len, unsigned long highmem)
{
exit(1);
}
+ /* Special kludge - This page will be mapped in to userspace processes
+ * from physmem_fd, so it needs to be written out there.
+ */
+ os_seek_file(physmem_fd, __pa(&__syscall_stub_start));
+ os_write_file(physmem_fd, &__syscall_stub_start, PAGE_SIZE);
+
bootmap_size = init_bootmem(pfn, pfn + delta);
free_bootmem(__pa(reserve_end) + bootmap_size,
len - bootmap_size - reserve);
#include "uml-config.h"
#include "choose-mode.h"
#include "mode.h"
+#include "tempfile.h"
#ifdef UML_CONFIG_MODE_SKAS
#include "skas.h"
#include "skas_ptrace.h"
kill(target, SIGIO);
}
+int ptrace_faultinfo = 0;
+int proc_mm = 1;
+
+extern void *__syscall_stub_start, __syscall_stub_end;
+
#ifdef UML_CONFIG_MODE_SKAS
-static inline int check_skas3_ptrace_support(void)
+static inline void check_skas3_ptrace_support(void)
{
struct ptrace_faultinfo fi;
- int pid, n, ret = 1;
+ int pid, n;
printf("Checking for the skas3 patch in the host...");
pid = start_ptraced_child();
else {
perror("not found");
}
- ret = 0;
- } else {
+ }
+ else {
+ ptrace_faultinfo = 1;
printf("found\n");
}
init_registers(pid);
stop_ptraced_child(pid, 1, 1);
-
- return(ret);
}
int can_do_skas(void)
{
- int ret = 1;
-
printf("Checking for /proc/mm...");
if (os_access("/proc/mm", OS_ACC_W_OK) < 0) {
+ proc_mm = 0;
printf("not found\n");
- ret = 0;
goto out;
- } else {
+ }
+ else {
printf("found\n");
}
- ret = check_skas3_ptrace_support();
out:
- return ret;
+ check_skas3_ptrace_support();
+ return 1;
}
#else
int can_do_skas(void)
# Licensed under the GPL
#
-obj-y := exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \
+obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \
syscall_kern.o syscall_user.o tlb.o trap_user.o uaccess.o \
subdir- := util
-USER_OBJS := process.o
+USER_OBJS := process.o clone.o
include arch/um/scripts/Makefile.rules
+
+# clone.o is in the stub, so it can't be built with profiling
+$(obj)/clone.o : c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS))
--- /dev/null
+#include <sched.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include <sys/time.h>
+#include <asm/unistd.h>
+#include <asm/page.h>
+#include "ptrace_user.h"
+#include "skas.h"
+#include "stub-data.h"
+#include "uml-config.h"
+#include "sysdep/stub.h"
+
+/* This is in a separate file because it needs to be compiled with any
+ * extraneous gcc flags (-pg, -fprofile-arcs, -ftest-coverage) disabled
+ */
+void __attribute__ ((__section__ (".__syscall_stub")))
+stub_clone_handler(void)
+{
+ long err;
+ struct stub_data *from = (struct stub_data *) UML_CONFIG_STUB_DATA;
+
+ err = stub_syscall2(__NR_clone, CLONE_PARENT | CLONE_FILES | SIGCHLD,
+ UML_CONFIG_STUB_DATA + PAGE_SIZE / 2 -
+ sizeof(void *));
+ if(err != 0)
+ goto out;
+
+ err = stub_syscall4(__NR_ptrace, PTRACE_TRACEME, 0, 0, 0);
+ if(err)
+ goto out;
+
+ err = stub_syscall3(__NR_setitimer, ITIMER_VIRTUAL,
+ (long) &from->timer, 0);
+ if(err)
+ goto out;
+
+ err = stub_syscall6(STUB_MMAP_NR, UML_CONFIG_STUB_DATA, PAGE_SIZE,
+ PROT_READ | PROT_WRITE, MAP_FIXED | MAP_SHARED,
+ from->fd, from->offset);
+ out:
+ /* save current result. Parent: pid; child: retcode of mmap */
+ from->err = err;
+ trap_myself();
+}
void flush_thread_skas(void)
{
force_flush_all();
- switch_mm_skas(current->mm->context.skas.mm_fd);
+ switch_mm_skas(¤t->mm->context.skas.id);
}
void start_thread_skas(struct pt_regs *regs, unsigned long eip,
--- /dev/null
+/*
+ * Copyright (C) 2005 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __MM_ID_H
+#define __MM_ID_H
+
+struct mm_id {
+ union {
+ int mm_fd;
+ int pid;
+ } u;
+ unsigned long stack;
+};
+
+#endif
#ifndef __SKAS_MMU_H
#define __SKAS_MMU_H
+#include "mm_id.h"
+
struct mmu_context_skas {
- int mm_fd;
+ struct mm_id id;
+ unsigned long last_page_table;
};
+extern void switch_mm_skas(struct mm_id * mm_idp);
+
#endif
/*
#ifndef __SKAS_H
#define __SKAS_H
+#include "mm_id.h"
#include "sysdep/ptrace.h"
extern int userspace_pid[];
+extern int proc_mm, ptrace_faultinfo;
extern void switch_threads(void *me, void *next);
extern void thread_wait(void *sw, void *fb);
extern void remove_sigstack(void);
extern void new_thread_handler(int sig);
extern void handle_syscall(union uml_pt_regs *regs);
-extern void map(int fd, unsigned long virt, unsigned long len, int r, int w,
- int x, int phys_fd, unsigned long long offset);
-extern int unmap(int fd, void *addr, unsigned long len);
-extern int protect(int fd, unsigned long addr, unsigned long len,
- int r, int w, int x);
+extern int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len,
+ int r, int w, int x, int phys_fd, unsigned long long offset);
+extern int unmap(struct mm_id * mm_idp, void *addr, unsigned long len);
+extern int protect(struct mm_id * mm_idp, unsigned long addr,
+ unsigned long len, int r, int w, int x);
extern void user_signal(int sig, union uml_pt_regs *regs, int pid);
extern int new_mm(int from);
-extern void start_userspace(int cpu);
+extern int start_userspace(unsigned long stub_stack);
+extern int copy_context_skas0(unsigned long stack, int pid);
extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
extern long execute_syscall_skas(void *r);
+extern unsigned long current_stub_stack(void);
#endif
--- /dev/null
+/*
+ * Copyright (C) 2005 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __STUB_DATA_H
+#define __STUB_DATA_H
+
+#include <sys/time.h>
+
+struct stub_data {
+ long offset;
+ int fd;
+ struct itimerval timer;
+ long err;
+};
+
+#endif
#include "linux/config.h"
#include "linux/mm.h"
+#include "asm/pgtable.h"
#include "mem_user.h"
+#include "skas.h"
unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out,
unsigned long *task_size_out)
*task_size_out = CONFIG_HOST_TASK_SIZE;
#else
*host_size_out = top;
- *task_size_out = top;
+ if (proc_mm && ptrace_faultinfo)
+ *task_size_out = top;
+ else *task_size_out = CONFIG_STUB_START & PGDIR_MASK;
#endif
return(((unsigned long) set_task_sizes_skas) & ~0xffffff);
}
* Licensed under the GPL
*/
+#include <signal.h>
#include <errno.h>
#include <sys/mman.h>
+#include <sys/wait.h>
+#include <asm/page.h>
+#include <asm/unistd.h>
#include "mem_user.h"
#include "mem.h"
+#include "mm_id.h"
#include "user.h"
#include "os.h"
#include "proc_mm.h"
-
-void map(int fd, unsigned long virt, unsigned long len, int r, int w,
- int x, int phys_fd, unsigned long long offset)
+#include "ptrace_user.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "task.h"
+#include "registers.h"
+#include "uml-config.h"
+#include "sysdep/ptrace.h"
+#include "sysdep/stub.h"
+#include "skas.h"
+
+extern unsigned long syscall_stub, __syscall_stub_start;
+
+extern void wait_stub_done(int pid, int sig, char * fname);
+
+static long run_syscall_stub(struct mm_id * mm_idp, int syscall,
+ unsigned long *args)
{
- struct proc_mm_op map;
- int prot, n;
-
- prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
- (x ? PROT_EXEC : 0);
-
- map = ((struct proc_mm_op) { .op = MM_MMAP,
- .u =
- { .mmap =
- { .addr = virt,
- .len = len,
- .prot = prot,
- .flags = MAP_SHARED |
- MAP_FIXED,
- .fd = phys_fd,
- .offset = offset
- } } } );
- n = os_write_file(fd, &map, sizeof(map));
- if(n != sizeof(map))
- printk("map : /proc/mm map failed, err = %d\n", -n);
+ int n, pid = mm_idp->u.pid;
+ unsigned long regs[MAX_REG_NR];
+
+ get_safe_registers(regs);
+ regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
+ ((unsigned long) &syscall_stub -
+ (unsigned long) &__syscall_stub_start);
+ /* XXX Don't have a define for starting a syscall */
+ regs[REGS_SYSCALL_NR] = syscall;
+ regs[REGS_SYSCALL_ARG1] = args[0];
+ regs[REGS_SYSCALL_ARG2] = args[1];
+ regs[REGS_SYSCALL_ARG3] = args[2];
+ regs[REGS_SYSCALL_ARG4] = args[3];
+ regs[REGS_SYSCALL_ARG5] = args[4];
+ regs[REGS_SYSCALL_ARG6] = args[5];
+ n = ptrace_setregs(pid, regs);
+ if(n < 0){
+ printk("run_syscall_stub : PTRACE_SETREGS failed, "
+ "errno = %d\n", n);
+ return(n);
+ }
+
+ wait_stub_done(pid, 0, "run_syscall_stub");
+
+ return(*((unsigned long *) mm_idp->stack));
}
-int unmap(int fd, void *addr, unsigned long len)
+int map(struct mm_id *mm_idp, unsigned long virt, unsigned long len,
+ int r, int w, int x, int phys_fd, unsigned long long offset)
{
- struct proc_mm_op unmap;
- int n;
-
- unmap = ((struct proc_mm_op) { .op = MM_MUNMAP,
- .u =
- { .munmap =
- { .addr = (unsigned long) addr,
- .len = len } } } );
- n = os_write_file(fd, &unmap, sizeof(unmap));
- if(n != sizeof(unmap)) {
- if(n < 0)
- return(n);
- else if(n > 0)
- return(-EIO);
- }
-
- return(0);
+ int prot, n;
+
+ prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
+ (x ? PROT_EXEC : 0);
+
+ if(proc_mm){
+ struct proc_mm_op map;
+ int fd = mm_idp->u.mm_fd;
+ map = ((struct proc_mm_op) { .op = MM_MMAP,
+ .u =
+ { .mmap =
+ { .addr = virt,
+ .len = len,
+ .prot = prot,
+ .flags = MAP_SHARED |
+ MAP_FIXED,
+ .fd = phys_fd,
+ .offset= offset
+ } } } );
+ n = os_write_file(fd, &map, sizeof(map));
+ if(n != sizeof(map))
+ printk("map : /proc/mm map failed, err = %d\n", -n);
+ }
+ else {
+ long res;
+ unsigned long args[] = { virt, len, prot,
+ MAP_SHARED | MAP_FIXED, phys_fd,
+ MMAP_OFFSET(offset) };
+
+ res = run_syscall_stub(mm_idp, STUB_MMAP_NR, args);
+ if((void *) res == MAP_FAILED)
+ printk("mmap stub failed, errno = %d\n", res);
+ }
+
+ return 0;
}
-int protect(int fd, unsigned long addr, unsigned long len, int r, int w,
- int x, int must_succeed)
+int unmap(struct mm_id *mm_idp, void *addr, unsigned long len)
{
- struct proc_mm_op protect;
- int prot, n;
-
- prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
- (x ? PROT_EXEC : 0);
-
- protect = ((struct proc_mm_op) { .op = MM_MPROTECT,
- .u =
- { .mprotect =
- { .addr = (unsigned long) addr,
- .len = len,
- .prot = prot } } } );
-
- n = os_write_file(fd, &protect, sizeof(protect));
- if(n != sizeof(protect)) {
- if(n == 0) return(0);
-
- if(must_succeed)
- panic("protect failed, err = %d", -n);
-
- return(-EIO);
- }
+ int n;
+
+ if(proc_mm){
+ struct proc_mm_op unmap;
+ int fd = mm_idp->u.mm_fd;
+ unmap = ((struct proc_mm_op) { .op = MM_MUNMAP,
+ .u =
+ { .munmap =
+ { .addr =
+ (unsigned long) addr,
+ .len = len } } } );
+ n = os_write_file(fd, &unmap, sizeof(unmap));
+ if(n != sizeof(unmap)) {
+ if(n < 0)
+ return(n);
+ else if(n > 0)
+ return(-EIO);
+ }
+ }
+ else {
+ int res;
+ unsigned long args[] = { (unsigned long) addr, len, 0, 0, 0,
+ 0 };
+
+ res = run_syscall_stub(mm_idp, __NR_munmap, args);
+ if(res < 0)
+ printk("munmap stub failed, errno = %d\n", res);
+ }
+
+ return(0);
+}
- return(0);
+int protect(struct mm_id *mm_idp, unsigned long addr, unsigned long len,
+ int r, int w, int x)
+{
+ struct proc_mm_op protect;
+ int prot, n;
+
+ prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
+ (x ? PROT_EXEC : 0);
+
+ if(proc_mm){
+ int fd = mm_idp->u.mm_fd;
+ protect = ((struct proc_mm_op) { .op = MM_MPROTECT,
+ .u =
+ { .mprotect =
+ { .addr =
+ (unsigned long) addr,
+ .len = len,
+ .prot = prot } } } );
+
+ n = os_write_file(fd, &protect, sizeof(protect));
+ if(n != sizeof(protect))
+ panic("protect failed, err = %d", -n);
+ }
+ else {
+ int res;
+ unsigned long args[] = { addr, len, prot, 0, 0, 0 };
+
+ res = run_syscall_stub(mm_idp, __NR_mprotect, args);
+ if(res < 0)
+ panic("mprotect stub failed, errno = %d\n", res);
+ }
+
+ return(0);
}
void before_mem_skas(unsigned long unused)
{
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
* Licensed under the GPL
*/
+#include "linux/config.h"
#include "linux/sched.h"
#include "linux/list.h"
#include "linux/spinlock.h"
#include "linux/slab.h"
+#include "linux/errno.h"
+#include "linux/mm.h"
#include "asm/current.h"
#include "asm/segment.h"
#include "asm/mmu.h"
+#include "asm/pgalloc.h"
+#include "asm/pgtable.h"
#include "os.h"
#include "skas.h"
+extern int __syscall_stub_start;
+
+static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
+ unsigned long kernel)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ spin_lock(&mm->page_table_lock);
+ pgd = pgd_offset(mm, proc);
+ pud = pud_alloc(mm, pgd, proc);
+ if (!pud)
+ goto out;
+
+ pmd = pmd_alloc(mm, pud, proc);
+ if (!pmd)
+ goto out_pmd;
+
+ pte = pte_alloc_map(mm, pmd, proc);
+ if (!pte)
+ goto out_pte;
+
+ /* There's an interaction between the skas0 stub pages, stack
+ * randomization, and the BUG at the end of exit_mmap. exit_mmap
+ * checks that the number of page tables freed is the same as had
+ * been allocated. If the stack is on the last page table page,
+ * then the stack pte page will be freed, and if not, it won't. To
+ * avoid having to know where the stack is, or if the process mapped
+ * something at the top of its address space for some other reason,
+ * we set TASK_SIZE to end at the start of the last page table.
+ * This keeps exit_mmap off the last page, but introduces a leak
+ * of that page. So, we hang onto it here and free it in
+ * destroy_context_skas.
+ */
+
+ mm->context.skas.last_page_table = pmd_page_kernel(*pmd);
+
+ *pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT));
+ *pte = pte_mkexec(*pte);
+ *pte = pte_wrprotect(*pte);
+ spin_unlock(&mm->page_table_lock);
+ return(0);
+
+ out_pmd:
+ pud_free(pud);
+ out_pte:
+ pmd_free(pmd);
+ out:
+ spin_unlock(&mm->page_table_lock);
+ return(-ENOMEM);
+}
+
int init_new_context_skas(struct task_struct *task, struct mm_struct *mm)
{
- int from;
+ struct mm_struct *cur_mm = current->mm;
+ struct mm_id *cur_mm_id = &cur_mm->context.skas.id;
+ struct mm_id *mm_id = &mm->context.skas.id;
+ unsigned long stack;
+ int from, ret;
- if((current->mm != NULL) && (current->mm != &init_mm))
- from = current->mm->context.skas.mm_fd;
- else from = -1;
+ if(proc_mm){
+ if((cur_mm != NULL) && (cur_mm != &init_mm))
+ from = cur_mm->context.skas.id.u.mm_fd;
+ else from = -1;
- mm->context.skas.mm_fd = new_mm(from);
- if(mm->context.skas.mm_fd < 0){
- printk("init_new_context_skas - new_mm failed, errno = %d\n",
- mm->context.skas.mm_fd);
- return(mm->context.skas.mm_fd);
+ ret = new_mm(from);
+ if(ret < 0){
+ printk("init_new_context_skas - new_mm failed, "
+ "errno = %d\n", ret);
+ return ret;
+ }
+ mm_id->u.mm_fd = ret;
}
+ else {
+ /* This zeros the entry that pgd_alloc didn't, needed since
+ * we are about to reinitialize it, and want mm.nr_ptes to
+ * be accurate.
+ */
+ mm->pgd[USER_PTRS_PER_PGD] = __pgd(0);
- return(0);
+ ret = init_stub_pte(mm, CONFIG_STUB_CODE,
+ (unsigned long) &__syscall_stub_start);
+ if(ret)
+ goto out;
+
+ ret = -ENOMEM;
+ stack = get_zeroed_page(GFP_KERNEL);
+ if(stack == 0)
+ goto out;
+ mm_id->stack = stack;
+
+ ret = init_stub_pte(mm, CONFIG_STUB_DATA, stack);
+ if(ret)
+ goto out_free;
+
+ mm->nr_ptes--;
+
+ if((cur_mm != NULL) && (cur_mm != &init_mm))
+ mm_id->u.pid = copy_context_skas0(stack,
+ cur_mm_id->u.pid);
+ else mm_id->u.pid = start_userspace(stack);
+ }
+
+ return 0;
+
+ out_free:
+ free_page(mm_id->stack);
+ out:
+ return ret;
}
void destroy_context_skas(struct mm_struct *mm)
{
- os_close_file(mm->context.skas.mm_fd);
-}
+ struct mmu_context_skas *mmu = &mm->context.skas;
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+ if(proc_mm)
+ os_close_file(mmu->id.u.mm_fd);
+ else {
+ os_kill_ptraced_process(mmu->id.u.pid, 1);
+ free_page(mmu->id.stack);
+ free_page(mmu->last_page_table);
+ }
+}
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
#include <sys/wait.h>
#include <sys/mman.h>
#include <sys/user.h>
+#include <sys/time.h>
#include <asm/unistd.h>
+#include <asm/types.h>
#include "user.h"
#include "ptrace_user.h"
#include "time_user.h"
#include "user_util.h"
#include "kern_util.h"
#include "skas.h"
+#include "stub-data.h"
+#include "mm_id.h"
#include "sysdep/sigcontext.h"
+#include "sysdep/stub.h"
#include "os.h"
#include "proc_mm.h"
#include "skas_ptrace.h"
#include "chan_user.h"
#include "signal_user.h"
#include "registers.h"
+#include "mem.h"
+#include "uml-config.h"
#include "process.h"
int is_skas_winch(int pid, int fd, void *data)
return(1);
}
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+void wait_stub_done(int pid, int sig, char * fname)
{
- int err;
-
- err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
- if(err)
- panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
- "errno = %d\n", errno);
+ int n, status, err;
+
+ do {
+ if ( sig != -1 ) {
+ err = ptrace(PTRACE_CONT, pid, 0, sig);
+ if(err)
+ panic("%s : continue failed, errno = %d\n",
+ fname, errno);
+ }
+ sig = 0;
+
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ } while((n >= 0) && WIFSTOPPED(status) &&
+ (WSTOPSIG(status) == SIGVTALRM));
+
+ if((n < 0) || !WIFSTOPPED(status) ||
+ (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status != SIGTRAP))){
+ panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
+ "pid = %d, n = %d, errno = %d, status = 0x%x\n",
+ fname, pid, n, errno, status);
+ }
+}
- /* Special handling for i386, which has different structs */
- if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
- memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
- sizeof(struct faultinfo) -
- sizeof(struct ptrace_faultinfo));
+void get_skas_faultinfo(int pid, struct faultinfo * fi)
+{
+ int err;
+
+ if(ptrace_faultinfo){
+ err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
+ if(err)
+ panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
+ "errno = %d\n", errno);
+
+ /* Special handling for i386, which has different structs */
+ if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
+ memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
+ sizeof(struct faultinfo) -
+ sizeof(struct ptrace_faultinfo));
+ }
+ else {
+ wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo");
+
+ /* faultinfo is prepared by the stub-segv-handler at start of
+ * the stub stack page. We just have to copy it.
+ */
+ memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
+ }
}
static void handle_segv(int pid, union uml_pt_regs * regs)
handle_syscall(regs);
}
-static int userspace_tramp(void *arg)
+extern int __syscall_stub_start;
+
+static int userspace_tramp(void *stack)
{
- init_new_thread_signals(0);
- enable_timer();
+ void *addr;
+
ptrace(PTRACE_TRACEME, 0, 0, 0);
+
+ init_new_thread_signals(1);
+ enable_timer();
+
+ if(!proc_mm){
+ /* This has a pte, but it can't be mapped in with the usual
+ * tlb_flush mechanism because this is part of that mechanism
+ */
+ int fd;
+ __u64 offset;
+
+ fd = phys_mapping(to_phys(&__syscall_stub_start), &offset);
+ addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(),
+ PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
+ if(addr == MAP_FAILED){
+ printk("mapping mmap stub failed, errno = %d\n",
+ errno);
+ exit(1);
+ }
+
+ if(stack != NULL){
+ fd = phys_mapping(to_phys(stack), &offset);
+ addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(),
+ PROT_READ | PROT_WRITE,
+ MAP_FIXED | MAP_SHARED, fd, offset);
+ if(addr == MAP_FAILED){
+ printk("mapping segfault stack failed, "
+ "errno = %d\n", errno);
+ exit(1);
+ }
+ }
+ }
+ if(!ptrace_faultinfo && (stack != NULL)){
+ unsigned long v = UML_CONFIG_STUB_CODE +
+ (unsigned long) stub_segv_handler -
+ (unsigned long) &__syscall_stub_start;
+
+ set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size());
+ set_handler(SIGSEGV, (void *) v, SA_ONSTACK,
+ SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
+ SIGUSR1, -1);
+ }
+
os_stop_process(os_getpid());
return(0);
}
#define NR_CPUS 1
int userspace_pid[NR_CPUS];
-void start_userspace(int cpu)
+int start_userspace(unsigned long stub_stack)
{
void *stack;
unsigned long sp;
- int pid, status, n;
+ int pid, status, n, flags;
stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
- pid = clone(userspace_tramp, (void *) sp,
- CLONE_FILES | CLONE_VM | SIGCHLD, NULL);
+ flags = CLONE_FILES | SIGCHLD;
+ if(proc_mm) flags |= CLONE_VM;
+ pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if(pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
if(munmap(stack, PAGE_SIZE) < 0)
panic("start_userspace : munmap failed, errno = %d\n", errno);
- userspace_pid[cpu] = pid;
+ return(pid);
}
void userspace(union uml_pt_regs *regs)
if(WIFSTOPPED(status)){
switch(WSTOPSIG(status)){
case SIGSEGV:
- handle_segv(pid, regs);
+ if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo)
+ user_signal(SIGSEGV, regs, pid);
+ else handle_segv(pid, regs);
break;
case SIGTRAP + 0x80:
handle_trap(pid, regs, local_using_sysemu);
printk("userspace - child stopped with signal "
"%d\n", WSTOPSIG(status));
}
+ pid = userspace_pid[0];
interrupt_end();
/* Avoid -ERESTARTSYS handling in host */
#define INIT_JMP_HALT 3
#define INIT_JMP_REBOOT 4
+
+int copy_context_skas0(unsigned long new_stack, int pid)
+{
+ int err;
+ unsigned long regs[MAX_REG_NR];
+ unsigned long current_stack = current_stub_stack();
+ struct stub_data *data = (struct stub_data *) current_stack;
+ struct stub_data *child_data = (struct stub_data *) new_stack;
+ __u64 new_offset;
+ int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
+
+ /* prepare offset and fd of child's stack as argument for parent's
+ * and child's mmap2 calls
+ */
+ *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
+ .fd = new_fd,
+ .timer = ((struct itimerval)
+ { { 0, 1000000 / hz() },
+ { 0, 1000000 / hz() }})});
+ get_safe_registers(regs);
+
+ /* Set parent's instruction pointer to start of clone-stub */
+ regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
+ (unsigned long) stub_clone_handler -
+ (unsigned long) &__syscall_stub_start;
+ regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
+ sizeof(void *);
+ err = ptrace_setregs(pid, regs);
+ if(err < 0)
+ panic("copy_context_skas0 : PTRACE_SETREGS failed, "
+ "pid = %d, errno = %d\n", pid, errno);
+
+ /* set a well known return code for detection of child write failure */
+ child_data->err = 12345678;
+
+ /* Wait, until parent has finished its work: read child's pid from
+ * parent's stack, and check, if bad result.
+ */
+ wait_stub_done(pid, 0, "copy_context_skas0");
+
+ pid = data->err;
+ if(pid < 0)
+ panic("copy_context_skas0 - stub-parent reports error %d\n",
+ pid);
+
+ /* Wait, until child has finished too: read child's result from
+ * child's stack and check it.
+ */
+ wait_stub_done(pid, -1, "copy_context_skas0");
+ if (child_data->err != UML_CONFIG_STUB_DATA)
+ panic("copy_context_skas0 - stub-child reports error %d\n",
+ child_data->err);
+
+ if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
+ (void *)PTRACE_O_TRACESYSGOOD) < 0)
+ panic("copy_context_skas0 : PTRACE_SETOPTIONS failed, "
+ "errno = %d\n", errno);
+
+ return pid;
+}
+
void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
void (*handler)(int))
{
siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT);
}
-void switch_mm_skas(int mm_fd)
+void switch_mm_skas(struct mm_id *mm_idp)
{
int err;
#warning need cpu pid in switch_mm_skas
- err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0, mm_fd);
- if(err)
- panic("switch_mm_skas - PTRACE_SWITCH_MM failed, errno = %d\n",
- errno);
-}
-
-void kill_off_processes_skas(void)
-{
-#warning need to loop over userspace_pids in kill_off_processes_skas
- os_kill_ptraced_process(userspace_pid[0], 1);
+ if(proc_mm){
+ err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
+ mm_idp->u.mm_fd);
+ if(err)
+ panic("switch_mm_skas - PTRACE_SWITCH_MM failed, "
+ "errno = %d\n", errno);
+ }
+ else userspace_pid[0] = mm_idp->u.pid;
}
/*
return(0);
}
+extern int userspace_pid[];
+
int start_uml_skas(void)
{
- start_userspace(0);
+ if(proc_mm)
+ userspace_pid[0] = start_userspace(0);
init_new_thread_signals(1);
#warning Need to look up userspace_pid by cpu
return(userspace_pid[0]);
}
+
+void kill_off_processes_skas(void)
+{
+ if(proc_mm)
+#warning need to loop over userspace_pids in kill_off_processes_skas
+ os_kill_ptraced_process(userspace_pid[0], 1);
+ else {
+ struct task_struct *p;
+ int pid, me;
+
+ me = os_getpid();
+ for_each_process(p){
+ if(p->mm == NULL)
+ continue;
+
+ pid = p->mm->context.skas.id.u.pid;
+ os_kill_ptraced_process(pid, 1);
+ }
+ }
+}
+
+unsigned long current_stub_stack(void)
+{
+ if(current->mm == NULL)
+ return(0);
+
+ return(current->mm->context.skas.id.stack);
+}
#include "linux/stddef.h"
#include "linux/sched.h"
+#include "linux/config.h"
#include "linux/mm.h"
#include "asm/page.h"
#include "asm/pgtable.h"
#include "os.h"
#include "tlb.h"
-static void do_ops(int fd, struct host_vm_op *ops, int last)
+static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last)
{
struct host_vm_op *op;
int i;
op = &ops[i];
switch(op->type){
case MMAP:
- map(fd, op->u.mmap.addr, op->u.mmap.len,
+ map(&mmu->skas.id, op->u.mmap.addr, op->u.mmap.len,
op->u.mmap.r, op->u.mmap.w, op->u.mmap.x,
op->u.mmap.fd, op->u.mmap.offset);
break;
case MUNMAP:
- unmap(fd, (void *) op->u.munmap.addr,
+ unmap(&mmu->skas.id, (void *) op->u.munmap.addr,
op->u.munmap.len);
break;
case MPROTECT:
- protect(fd, op->u.mprotect.addr, op->u.mprotect.len,
- op->u.mprotect.r, op->u.mprotect.w,
- op->u.mprotect.x);
+ protect(&mmu->skas.id, op->u.mprotect.addr,
+ op->u.mprotect.len, op->u.mprotect.r,
+ op->u.mprotect.w, op->u.mprotect.x);
break;
default:
printk("Unknown op type %d in do_ops\n", op->type);
}
}
+extern int proc_mm;
+
static void fix_range(struct mm_struct *mm, unsigned long start_addr,
unsigned long end_addr, int force)
{
- int fd = mm->context.skas.mm_fd;
+ if(!proc_mm && (end_addr > CONFIG_STUB_START))
+ end_addr = CONFIG_STUB_START;
- fix_range_common(mm, start_addr, end_addr, force, fd, do_ops);
+ fix_range_common(mm, start_addr, end_addr, force, do_ops);
}
void __flush_tlb_one_skas(unsigned long addr)
void flush_tlb_mm_skas(struct mm_struct *mm)
{
+ unsigned long end;
+
/* Don't bother flushing if this address space is about to be
* destroyed.
*/
if(atomic_read(&mm->mm_users) == 0)
return;
- fix_range(mm, 0, host_task_size, 0);
- flush_tlb_kernel_range_common(start_vm, end_vm);
+ end = proc_mm ? task_size : CONFIG_STUB_START;
+ fix_range(mm, 0, end, 0);
}
void force_flush_all_skas(void)
{
- fix_range(current->mm, 0, host_task_size, 1);
+ unsigned long end = proc_mm ? task_size : CONFIG_STUB_START;
+ fix_range(current->mm, 0, end, 1);
}
set_interval(ITIMER_VIRTUAL);
}
+void prepare_timer(void * ptr)
+{
+ int usec = 1000000/hz();
+ *(struct itimerval *)ptr = ((struct itimerval) { { 0, usec },
+ { 0, usec }});
+}
+
void disable_timer(void)
{
struct itimerval disable = ((struct itimerval) { { 0, 0 }, { 0, 0 }});
#define ADD_ROUND(n, inc) (((n) + (inc)) & ~((inc) - 1))
void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
- unsigned long end_addr, int force, int data,
- void (*do_ops)(int, struct host_vm_op *, int))
+ unsigned long end_addr, int force,
+ void (*do_ops)(union mm_context *, struct host_vm_op *,
+ int))
{
pgd_t *npgd;
pud_t *npud;
pmd_t *npmd;
pte_t *npte;
+ union mm_context *mmu = &mm->context;
unsigned long addr, end;
int r, w, x;
struct host_vm_op ops[16];
end = end_addr;
if(force || pgd_newpage(*npgd)){
op_index = add_munmap(addr, end - addr, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
pgd_mkuptodate(*npgd);
}
end = end_addr;
if(force || pud_newpage(*npud)){
op_index = add_munmap(addr, end - addr, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
pud_mkuptodate(*npud);
}
end = end_addr;
if(force || pmd_newpage(*npmd)){
op_index = add_munmap(addr, end - addr, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
pmd_mkuptodate(*npmd);
}
op_index = add_mmap(addr,
pte_val(*npte) & PAGE_MASK,
PAGE_SIZE, r, w, x, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
else op_index = add_munmap(addr, PAGE_SIZE, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
}
else if(pte_newprot(*npte))
op_index = add_mprotect(addr, PAGE_SIZE, r, w, x, ops,
- op_index, last_op, data,
+ op_index, last_op, mmu,
do_ops);
*npte = pte_mkuptodate(*npte);
addr += PAGE_SIZE;
}
- (*do_ops)(data, ops, op_index);
+ (*do_ops)(mmu, ops, op_index);
}
int flush_tlb_kernel_range_common(unsigned long start, unsigned long end)
return(updated);
}
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long address)
-{
- address &= PAGE_MASK;
- flush_tlb_range(vma, address, address + PAGE_SIZE);
-}
-
-void flush_tlb_all(void)
-{
- flush_tlb_mm(current->mm);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt,
- flush_tlb_kernel_range_common, start, end);
-}
-
-void flush_tlb_kernel_vm(void)
-{
- CHOOSE_MODE(flush_tlb_kernel_vm_tt(),
- flush_tlb_kernel_range_common(start_vm, end_vm));
-}
-
-void __flush_tlb_one(unsigned long addr)
-{
- CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start,
- end);
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
- CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm);
-}
-
-void force_flush_all(void)
-{
- CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas());
-}
-
pgd_t *pgd_offset_proc(struct mm_struct *mm, unsigned long address)
{
return(pgd_offset(mm, address));
}
int add_mmap(unsigned long virt, unsigned long phys, unsigned long len,
- int r, int w, int x, struct host_vm_op *ops, int index,
- int last_filled, int data,
- void (*do_ops)(int, struct host_vm_op *, int))
+ int r, int w, int x, struct host_vm_op *ops, int index,
+ int last_filled, union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *, int))
{
__u64 offset;
struct host_vm_op *last;
}
if(index == last_filled){
- (*do_ops)(data, ops, last_filled);
+ (*do_ops)(mmu, ops, last_filled);
index = -1;
}
}
int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops,
- int index, int last_filled, int data,
- void (*do_ops)(int, struct host_vm_op *, int))
+ int index, int last_filled, union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *, int))
{
struct host_vm_op *last;
}
if(index == last_filled){
- (*do_ops)(data, ops, last_filled);
+ (*do_ops)(mmu, ops, last_filled);
index = -1;
}
}
int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x,
- struct host_vm_op *ops, int index, int last_filled, int data,
- void (*do_ops)(int, struct host_vm_op *, int))
+ struct host_vm_op *ops, int index, int last_filled,
+ union mm_context *mmu,
+ void (*do_ops)(union mm_context *, struct host_vm_op *, int))
{
struct host_vm_op *last;
}
if(index == last_filled){
- (*do_ops)(data, ops, last_filled);
+ (*do_ops)(mmu, ops, last_filled);
index = -1;
}
.x = x } } });
return(index);
}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long address)
+{
+ address &= PAGE_MASK;
+ flush_tlb_range(vma, address, address + PAGE_SIZE);
+}
+
+void flush_tlb_all(void)
+{
+ flush_tlb_mm(current->mm);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt,
+ flush_tlb_kernel_range_common, start, end);
+}
+
+void flush_tlb_kernel_vm(void)
+{
+ CHOOSE_MODE(flush_tlb_kernel_vm_tt(),
+ flush_tlb_kernel_range_common(start_vm, end_vm));
+}
+
+void __flush_tlb_one(unsigned long addr)
+{
+ CHOOSE_MODE_PROC(__flush_tlb_one_tt, __flush_tlb_one_skas, addr);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ CHOOSE_MODE_PROC(flush_tlb_range_tt, flush_tlb_range_skas, vma, start,
+ end);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ CHOOSE_MODE_PROC(flush_tlb_mm_tt, flush_tlb_mm_skas, mm);
+}
+
+void force_flush_all(void)
+{
+ CHOOSE_MODE(force_flush_all_tt(), force_flush_all_skas());
+}
+
#include "os.h"
#include "tlb.h"
-static void do_ops(int unused, struct host_vm_op *ops, int last)
+static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last)
{
struct host_vm_op *op;
int i;
panic("fix_range fixing wrong address space, current = 0x%p",
current);
- fix_range_common(mm, start_addr, end_addr, force, 0, do_ops);
+ fix_range_common(mm, start_addr, end_addr, force, do_ops);
}
atomic_t vmchange_seq = ATOMIC_INIT(1);
_einittext = .;
}
. = ALIGN(4096);
+
.text :
{
*(.text)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
*(.gnu.linkonce.t*)
+
+ . = ALIGN(4096);
+ __syscall_stub_start = .;
+ *(.__syscall_stub*)
+ __syscall_stub_end = .;
+ . = ALIGN(4096);
}
#include "asm/common.lds.S"
err);
}
+void get_safe_registers(unsigned long *regs)
+{
+ memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+}
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
err);
}
+void get_safe_registers(unsigned long *regs)
+{
+ memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+}
+
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
endef
+# The stubs and unmap.o can't try to call mcount or update basic block data
+define unprofile
+ $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
+endef
+
quiet_cmd_make_link = SYMLINK $@
cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@
obj-y = bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o semaphore.o signal.o sigcontext.o syscalls.o sysrq.o \
- sys_call_table.o
+ ptrace_user.o semaphore.o signal.o sigcontext.o stub.o stub_segv.o \
+ syscalls.o sysrq.o sys_call_table.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_MODULES) += module.o
highmem.c-dir = mm
module.c-dir = kernel
+STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS))
+
+# _cflags works with kernel files, not with userspace ones, but c_flags does,
+# why ask why?
+$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS)
+
+$(obj)/stub.o : a_flags = $(STUB_CFLAGS)
+
subdir- := util
include arch/um/scripts/Makefile.unmap
--- /dev/null
+#include "uml-config.h"
+
+ .globl syscall_stub
+.section .__syscall_stub, "x"
+syscall_stub:
+ int $0x80
+ mov %eax, UML_CONFIG_STUB_DATA
+ int3
--- /dev/null
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#include <signal.h>
+#include <asm/sigcontext.h>
+#include <asm/unistd.h>
+#include "uml-config.h"
+#include "sysdep/sigcontext.h"
+#include "sysdep/faultinfo.h"
+
+void __attribute__ ((__section__ (".__syscall_stub")))
+stub_segv_handler(int sig)
+{
+ struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
+
+ GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
+ sc);
+
+ __asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
+ __asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
+ "int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
+ /* Pop the frame pointer and return address since we need to leave
+ * the stack in its original form when we do the sigreturn here, by
+ * hand.
+ */
+ __asm__("popl %%eax ; popl %%eax ; popl %%eax ; movl %0, %%eax ; "
+ "int $0x80" : : "g" (__NR_sigreturn));
+}
#XXX: why into lib-y?
lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \
- ptrace.o ptrace_user.o semaphore.o sigcontext.o signal.o \
- syscalls.o sysrq.o thunk.o syscall_table.o
+ ptrace.o ptrace_user.o semaphore.o sigcontext.o signal.o stub.o \
+ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o
obj-y := ksyms.o
obj-$(CONFIG_MODULES) += module.o um_module.o
thunk.S-dir = lib
module.c-dir = kernel
+STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS))
+
+# _cflags works with kernel files, not with userspace ones, but c_flags does,
+# why ask why?
+$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS)
+
+$(obj)/stub.o : a_flags = $(STUB_CFLAGS)
+
subdir- := util
include arch/um/scripts/Makefile.unmap
--- /dev/null
+#include "uml-config.h"
+
+ .globl syscall_stub
+.section .__syscall_stub, "x"
+syscall_stub:
+ syscall
+ /* We don't have 64-bit constants, so this constructs the address
+ * we need.
+ */
+ movq $(UML_CONFIG_STUB_DATA >> 32), %rbx
+ salq $32, %rbx
+ movq $(UML_CONFIG_STUB_DATA & 0xffffffff), %rcx
+ or %rcx, %rbx
+ movq %rax, (%rbx)
+ int3
--- /dev/null
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#include <signal.h>
+#include <linux/compiler.h>
+#include <asm/unistd.h>
+#include "uml-config.h"
+#include "sysdep/sigcontext.h"
+#include "sysdep/faultinfo.h"
+
+void __attribute__ ((__section__ (".__syscall_stub")))
+stub_segv_handler(int sig)
+{
+ struct ucontext *uc;
+
+ __asm__("movq %%rdx, %0" : "=g" (uc) :);
+ GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
+ &uc->uc_mcontext);
+
+ __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));
+ __asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;"
+ "syscall": : "g" (__NR_kill), "g" (SIGUSR1));
+ /* Two popqs to restore the stack to the state just before entering
+ * the handler, one pops the return address, the other pops the frame
+ * pointer.
+ */
+ __asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g"
+ (__NR_rt_sigreturn));
+}
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
+ if (c == &boot_cpu_data)
+ mtrr_bp_init();
+ else
+ mtrr_ap_init();
#ifdef CONFIG_NUMA
if (c != &boot_cpu_data)
numa_add_cpu(c - cpu_data);
fix_processor_context();
do_fpu_end();
+ mtrr_ap_init();
}
void restore_processor_state(void)
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
+ }
#define VSYSCALL_ADDR (-10*1024*1024)
#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.cacheline_aligned) + SIZEOF(.data.cacheline_aligned) + 4095) & ~(4095))
extern void do_syscall_trace(void);
typedef int (*syscall_t)(void *a0,...);
-extern int (*do_syscalls)(struct pt_regs *regs, syscall_t fun,
- int narg);
extern syscall_t sys_call_table[];
extern unsigned char sys_narg_table[];
/*
* Common code for old and new mmaps.
*/
-
-static inline long do_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
+long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
+ unsigned long flags, unsigned long fd, unsigned long pgoff)
{
int error = -EBADF;
struct file * file = NULL;
return error;
}
-unsigned long old_mmap(unsigned long addr, size_t len, int prot,
- int flags, int fd, off_t offset)
-{
- return do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-}
-
-long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
-{
- return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
-int sys_fork(struct pt_regs *regs)
-{
- return do_fork(SIGCHLD, regs->areg[1], regs, 0, NULL, NULL);
-}
-
-int sys_vfork(struct pt_regs *regs)
-{
- return do_fork(CLONE_VFORK|CLONE_VM|SIGCHLD, regs->areg[1],
- regs, 0, NULL, NULL);
-}
-
int sys_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
return -EFAULT;
}
-int sys_olduname(struct oldold_utsname * name)
-{
- int error;
-
- if (!name)
- return -EFAULT;
- if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
- return -EFAULT;
-
- error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
- error -= __put_user(0,name->sysname+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
- error -= __put_user(0,name->nodename+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
- error -= __put_user(0,name->release+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
- error -= __put_user(0,name->version+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
- error -= __put_user(0,name->machine+__OLD_UTS_LEN);
-
- return error ? -EFAULT : 0;
-}
-
-
/*
* Build the string table for the builtin "poor man's strace".
*/
regs->areg[2] = res;
do_syscall_trace();
}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
Code Review / linux-3.10.git / commitdiff