S: Canada
N: Zwane Mwaikambo
-E: zwane@linuxpower.ca
-W: http://function.linuxpower.ca
+E: zwane@arm.linux.org.uk
D: Various driver hacking
D: Lowlevel x86 kernel hacking
D: General debugging
attached to /proc/acpi/hotkey/poll_method, which is dnyamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
+ acpi_generic_hotkey [HW,ACPI]
+ Allow consolidated generic hotkey driver to
+ over-ride platform specific driver.
+ See also Documentation/acpi-hotkey.txt.
+
ad1816= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
See also Documentation/sound/oss/AD1816.
in the kernel as they aren't compatible with hotplug or PCI domains or
having sane locking.
-pcibios_present() and Since ages, you don't need to test presence
-pci_present() of PCI subsystem when trying to talk to it.
- If it's not there, the list of PCI devices
- is empty and all functions for searching for
- devices just return NULL.
-pcibios_(read|write)_* Superseded by their pci_(read|write)_*
- counterparts.
-pcibios_find_* Superseded by their pci_get_* counterparts.
-pci_for_each_dev() Superseded by pci_get_device()
-pci_for_each_dev_reverse() Superseded by pci_find_device_reverse()
-pci_for_each_bus() Superseded by pci_find_next_bus()
pci_find_device() Superseded by pci_get_device()
pci_find_subsys() Superseded by pci_get_subsys()
pci_find_slot() Superseded by pci_get_slot()
-pcibios_find_class() Superseded by pci_get_class()
-pci_find_class() Superseded by pci_get_class()
-pci_(read|write)_*_nodev() Superseded by pci_bus_(read|write)_*()
OPL3-SA2, SA3, and SAx DRIVER
P: Zwane Mwaikambo
-M: zwane@commfireservices.com
+M: zwane@arm.linux.org.uk
L: linux-sound@vger.kernel.org
S: Maintained
M: greg@kroah.com
S: Maintained
+PCIE HOTPLUG DRIVER
+P: Kristen Carlson Accardi
+M: kristen.c.accardi@intel.com
+L: pcihpd-discuss@lists.sourceforge.net
+S: Maintained
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
SC1200 WDT DRIVER
P: Zwane Mwaikambo
-M: zwane@commfireservices.com
+M: zwane@arm.linux.org.uk
S: Maintained
SCHEDULER
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+SHPC HOTPLUG DRIVER
+P: Kristen Carlson Accardi
+M: kristen.c.accardi@intel.com
+L: pcihpd-discuss@lists.sourceforge.net
+S: Maintained
+
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 13
-EXTRAVERSION =-rc6
+EXTRAVERSION =-rc7
NAME=Woozy Numbat
# *DOCUMENTATION*
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
- depends on DISCONTIGMEM
+ depends on DISCONTIGMEM && BROKEN
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
" br 1b\n"
".previous"
: "=r" (tmp), "=m" (lock->lock), "=r" (stuck)
- : "1" (lock->lock), "2" (stuck) : "memory");
+ : "m" (lock->lock), "2" (stuck) : "memory");
if (stuck < 0) {
printk(KERN_WARNING
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy),
"=&r" (stuck_lock), "=&r" (stuck_reader)
- : "0" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
+ : "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc);
" br 1b\n"
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock)
- : "0" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
+ : "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc);
model->reg_setup(®, ctr, &sys);
/* Configure the registers on all cpus. */
- smp_call_function(model->cpu_setup, ®, 0, 1);
+ (void)smp_call_function(model->cpu_setup, ®, 0, 1);
model->cpu_setup(®);
return 0;
}
static int
op_axp_start(void)
{
- smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+ (void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
op_axp_cpu_start(NULL);
return 0;
}
static void
op_axp_stop(void)
{
- smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+ (void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
op_axp_cpu_stop(NULL);
}
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL #&& n
+ depends on EXPERIMENTAL && BROKEN #&& n
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
/* 310 */ .long sys_request_key
.long sys_keyctl
.long sys_semtimedop
+/* vserver */ .long sys_ni_syscall
+ .long sys_ioprio_set
+/* 315 */ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
__syscall_end:
.rept NR_syscalls - (__syscall_end - __syscall_start) / 4
notify_die("unknown data abort code", regs, &info, instr, 0);
}
-volatile void __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
{
printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
if (data)
* 28-Sep-2004 BJD Updates for new serial port bits
* 04-Nov-2004 BJD Updated UART configuration process
* 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
+ * 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
- IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(ADC),
- IODESC_ENT(WATCHDOG)
+ IODESC_ENT(WATCHDOG),
};
static struct resource s3c_uart0_resource[] = {
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
+ depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
ENTRY(cpu_v6_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID
#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
#ifdef CONFIG_FPE_NWFPE_XP
-static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
+static inline __attribute_pure__ floatx80 getExtendedConstant(const unsigned int nIndex)
{
extern const floatx80 floatx80Constant[];
return floatx80Constant[nIndex];
}
#endif
-static inline const float64 getDoubleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float64 getDoubleConstant(const unsigned int nIndex)
{
extern const float64 float64Constant[];
return float64Constant[nIndex];
}
-static inline const float32 getSingleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float32 getSingleConstant(const unsigned int nIndex)
{
extern const float32 float32Constant[];
return float32Constant[nIndex];
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
- if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
- if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
- if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
- if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
}
return 0;
}
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
return
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- if ( floatx80_is_signaling_nan( a )
- || floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- if ( floatx80_is_signaling_nan( a )
- || floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
static int __init detect_init_APIC (void)
{
u32 h, l, features;
- extern void get_cpu_vendor(struct cpuinfo_x86*);
/* Disabled by kernel option? */
if (enable_local_apic < 0)
return -1;
- /* Workaround for us being called before identify_cpu(). */
- get_cpu_vendor(&boot_cpu_data);
-
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
wrmsr(MSR_P6_EVNTSEL0, 0, 0);
break;
case 15:
- if (boot_cpu_data.x86_model > 0x3)
+ if (boot_cpu_data.x86_model > 0x4)
break;
wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
setup_p6_watchdog();
break;
case 15:
- if (boot_cpu_data.x86_model > 0x3)
+ if (boot_cpu_data.x86_model > 0x4)
return;
if (!setup_p4_watchdog())
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+ switch (swd & ~cwd & 0x3f) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
- case 0x041: /* Stack Fault */
- case 0x241: /* Stack Fault | Direction */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
info.si_code = FPE_FLTINV;
- /* Should we clear the SF or let user space do it ???? */
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
config PCI
bool "PCI support"
help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
+ Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
+ here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Mon Jan 10 13:57:35 2005
+# Linux kernel version: 2.6.13-rc6
+# Tue Aug 16 14:40:41 2005
#
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=20
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CPUSETS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
CONFIG_IA64_SGI_SN2=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+CONFIG_IA64_SGI_SN_XP=m
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
# CONFIG_HOTPLUG_CPU is not set
+CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
#
# Power management and ACPI
#
+CONFIG_PM=y
CONFIG_ACPI=y
#
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_NUMA=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_SGI=y
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
#
# Device Drivers
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
CONFIG_SCSI_SATA_VITESSE=y
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2300=y
CONFIG_SCSI_QLA2322=y
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
#
# I2C support
#
# CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
#
# Misc devices
#
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_VERBS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Profiling support
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:28:12 2005
+# Linux kernel version: 2.6.13-rc6-tiger-smp
+# Wed Aug 17 10:19:51 2005
#
#
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
+# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_HOTPLUG_CPU is not set
#
# CONFIG_PCCARD is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
#
# Device Drivers
#
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# I2C support
#
# CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:31:11 2005
+# Linux kernel version: 2.6.13-rc6
+# Wed Aug 17 10:02:43 2005
#
#
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
#
# CONFIG_PCCARD is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
#
# Device Drivers
#
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
#
# Fusion MPT device support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_SENSOR is not set
#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
+# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
#
# Misc devices
#
#
# Video Adapters
#
-# CONFIG_TUNER_MULTI_I2C is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
#
# USB DSL modem support
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
.save rp, r0
.body
movl gp = __gp
- movl sp = stack_mem
+ movl sp = stack_mem+16384-16
bsw.1
br.call.sptk.many rp=start_bootloader
END(_start)
#endif
/* Attach the domains */
- for_each_online_cpu(i) {
+ for_each_cpu_mask(i, *cpu_map) {
struct sched_domain *sd;
#ifdef CONFIG_SCHED_SMT
sd = &per_cpu(cpu_domains, i);
DPRINT(("before cmpxchg() old_ctx=%p new_ctx=%p\n",
thread->pfm_context, ctx));
+ ret = -EBUSY;
old = ia64_cmpxchg(acq, &thread->pfm_context, NULL, ctx, sizeof(pfm_context_t *));
if (old != NULL) {
DPRINT(("load_pid [%d] already has a context\n", req->load_pid));
static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
-static spinlock_t data_lock, data_saved_lock;
+static DEFINE_SPINLOCK(data_lock);
+static DEFINE_SPINLOCK(data_saved_lock);
/** salinfo_platform_oemdata - optional callback to decode oemdata from an error
* record.
continue;
}
+ spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
hubdev->hdi_flush_nasid_list.widget_p[widget] =
sn_flush_device_list;
}
struct pci_controller *controller;
struct pcibus_bussoft *prom_bussoft_ptr;
struct hubdev_info *hubdev_info;
- void *provider_soft;
+ void *provider_soft = NULL;
struct sn_pcibus_provider *provider;
status = sal_get_pcibus_info((u64) segment, (u64) busnum,
if (bus == NULL) {
bus = pci_scan_bus(busnum, &pci_root_ops, controller);
if (bus == NULL)
- return; /* error, or bus already scanned */
+ goto error_return; /* error, or bus already scanned */
bus->sysdata = NULL;
}
*/
if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
- return; /* unsupported asic type */
+ goto error_return; /* unsupported asic type */
if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
goto error_return; /* no further fixup necessary */
provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
if (provider == NULL)
- return; /* no provider registerd for this asic */
+ goto error_return; /* no provider registerd for this asic */
- provider_soft = NULL;
+ bus->sysdata = controller;
if (provider->bus_fixup)
provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
- if (provider_soft == NULL)
- return; /* fixup failed or not applicable */
+ if (provider_soft == NULL) {
+ /* fixup failed or not applicable */
+ bus->sysdata = NULL;
+ goto error_return;
+ }
/*
* Generic bus fixup goes here. Don't reference prom_bussoft_ptr
* after this point.
*/
- bus->sysdata = controller;
PCI_CONTROLLER(bus)->platform_data = provider_soft;
nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
cnode = nasid_to_cnodeid(nasid);
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation Support"
- depends on SMP
+ depends on SMP && BROKEN
default n
# turning this on wastes a bunch of space.
config PCI
bool "PCI support"
+ depends on BROKEN
default n
help
Find out whether you have a PCI motherboard. PCI is the name of a
config DEBUG_PAGEALLOC
bool "Page alloc debugging"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && BROKEN
help
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
+static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
-static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
static void disable_m32700ut_irq(unsigned int irq)
{
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
+static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
-static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
static void disable_opsput_irq(unsigned int irq)
{
/* which physical physical ID maps to which logical CPU number */
static volatile int physid_2_cpu[NR_CPUS];
+#define physid_to_cpu(physid) physid_2_cpu[physid]
/* which logical CPU number maps to which physical ID */
volatile int cpu_2_physid[NR_CPUS];
return csum_partial(dst, len-missing, sum);
}
EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial);
#include <linux/mmzone.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
+#include <linux/module.h>
#include <asm/setup.h>
extern char _end[];
struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
pg_data_t m32r_node_data[MAX_NUMNODES];
default y if PPC_PREP
config SMP
+ depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
- depends on SMP
+ depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
source "drivers/zorro/Kconfig"
+if !44x || BROKEN
source kernel/power/Kconfig
+endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on 40x || 44x
default y
+config WANT_EARLY_SERIAL
+ bool
+ select SERIAL_8250
+ default n
+
menu "IBM 4xx options"
depends on 4xx
config BUBINGA
bool "Bubinga"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM 405EP evaluation board.
config BAMBOO
bool "Bamboo"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440EP evaluation board.
config EBONY
bool "Ebony"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GP evaluation board.
config LUAN
bool "Luan"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440SP evaluation board.
config OCOTEA
bool "Ocotea"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GX evaluation board.
depends on 4xx
default y
-config PM
- bool "Power Management support (EXPERIMENTAL)"
- depends on 4xx && EXPERIMENTAL
-
choice
prompt "TTYS0 device and default console"
depends on 40x
return DMA_STATUS_GOOD;
}
+#ifdef CONFIG_PPC4xx_EDMA
/*
* Enables the burst on the channel (BTEN bit in the control/count register)
* Note:
return DMA_STATUS_GOOD;
}
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);
+#endif /* CONFIG_PPC4xx_EDMA */
+
EXPORT_SYMBOL(ppc4xx_init_dma_channel);
EXPORT_SYMBOL(ppc4xx_get_channel_config);
EXPORT_SYMBOL(ppc4xx_set_channel_priority);
EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_get_dma_status);
EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
+
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
-
-/*
- * WARNING - magic here
- *
- * Ok, this is a horrid hack below, but marginally better than the
- * alternatives. What we really want is just to initialize
- * hvReleaseData in C as in the #if 0 section here. However, gcc
- * refuses to believe that (u32)&x is a constant expression, so will
- * not allow the xMsNucDataOffset field to be properly initialized.
- * So, we declare hvReleaseData in inline asm instead. We use inline
- * asm, rather than a .S file, because the assembler won't generate
- * the necessary relocation for the LparMap either, unless that symbol
- * is declared in the same source file. Finally, we put the asm in a
- * dummy, attribute-used function, instead of at file scope, because
- * file scope asms don't allow contraints. We want to use the "i"
- * constraints to put sizeof() and offsetof() expressions in there,
- * because including asm/offsets.h in C code then stringifying causes
- * all manner of warnings.
- */
-#if 0
struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xSlicNacaAddr = &naca, /* 64-bit Naca address */
- .xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
+ .xMsNucDataOffset = LPARMAP_PHYS,
.xFlags = HVREL_TAGSINACTIVE /* tags inactive */
/* 64 bit */
/* shared processors */
0xa7, 0x40, 0xf2, 0x4b,
0xf4, 0x4b, 0xf6, 0xf4 },
};
-#endif
-
-
-extern struct HvReleaseData hvReleaseData;
-
-static void __attribute_used__ hvReleaseData_wrapper(void)
-{
- /* This doesn't appear to need any alignment (even 4 byte) */
- asm volatile (
- " lparMapPhys = xLparMap - %3\n"
- " .data\n"
- " .globl hvReleaseData\n"
- "hvReleaseData:\n"
- " .long 0xc8a5d9c4\n" /* xDesc */
- /* "HvRD" in ebcdic */
- " .short %0\n" /* xSize */
- " .short %1\n" /* xVpdAreasPtrOffset */
- " .llong naca\n" /* xSlicNacaAddr */
- " .long lparMapPhys\n" /* xMsNucDataOffset */
- " .long 0\n" /* xRsvd1 */
- " .short %2\n" /* xFlags */
- " .short 4\n" /* xVrmIndex - v5r2m0 */
- " .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */
- " .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */
- " .long 0xd38995a4\n" /* xVrmName */
- " .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */
- " .long 0xf44bf6f4\n"
- " . = hvReleaseData + %0\n"
- " .previous\n"
- : : "i"(sizeof(hvReleaseData)),
- "i"(offsetof(struct naca_struct, xItVpdAreas)),
- "i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
- /* shared processors, HMT allowed */
- | 6), /* TEMP: This allows non-GA drivers */
- "i"(KERNELBASE)
- );
-}
-
-struct LparMap __attribute__((aligned (16))) xLparMap = {
- .xNumberEsids = HvEsidsToMap,
- .xNumberRanges = HvRangesToMap,
- .xSegmentTableOffs = STAB0_PAGE,
-
- .xEsids = {
- { .xKernelEsid = GET_ESID(KERNELBASE),
- .xKernelVsid = KERNEL_VSID(KERNELBASE), },
- { .xKernelEsid = GET_ESID(VMALLOCBASE),
- .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
- },
-
- .xRanges = {
- { .xPages = HvPagesToMap,
- .xOffset = 0,
- .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
- },
- },
-};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
+
+ifeq ($(CONFIG_PPC_ISERIES),y)
+arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
+AFLAGS_head.o += -Iarch/ppc64/kernel
+endif
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/hvcall.h>
+#include <asm/iSeries/LparMap.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
.globl fwnmi_data_area
fwnmi_data_area:
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+#include "lparmap.s"
+#endif /* CONFIG_PPC_ISERIES */
+
/*
* Vectors for the FWNMI option. Share common code.
*/
dma_addr_t dma_next = 0, dma_addr;
unsigned long flags;
struct scatterlist *s, *outs, *segstart;
- int outcount;
+ int outcount, incount;
unsigned long handle;
BUG_ON(direction == DMA_NONE);
outs = s = segstart = &sglist[0];
outcount = 1;
+ incount = nelems;
handle = 0;
/* Init first segment length for backout at failure */
DBG("mapped %d elements:\n", outcount);
- /* For the sake of iommu_free_sg, we clear out the length in the
+ /* For the sake of iommu_unmap_sg, we clear out the length in the
* next entry of the sglist if we didn't fill the list completely
*/
- if (outcount < nelems) {
+ if (outcount < incount) {
outs++;
outs->dma_address = DMA_ERROR_CODE;
outs->dma_length = 0;
--- /dev/null
+/*
+ * Copyright (C) 2005 Stephen Rothwell IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/iSeries/LparMap.h>
+
+const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
+ .xNumberEsids = HvEsidsToMap,
+ .xNumberRanges = HvRangesToMap,
+ .xSegmentTableOffs = STAB0_PAGE,
+
+ .xEsids = {
+ { .xKernelEsid = GET_ESID(KERNELBASE),
+ .xKernelVsid = KERNEL_VSID(KERNELBASE), },
+ { .xKernelEsid = GET_ESID(VMALLOCBASE),
+ .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+ },
+
+ .xRanges = {
+ { .xPages = HvPagesToMap,
+ .xOffset = 0,
+ .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+ },
+ },
+};
"lra 3,0(%4)\n"
"lr 5,%5\n"
"diag 2,4,0x8\n"
- "brc 8, .Litfits\n"
+ "brc 8, 1f\n"
"ar 5, %5\n"
- ".Litfits: \n"
+ "1: \n"
"lr %0,4\n"
"lr %1,5\n"
: "=d" (return_code), "=d" (return_len)
"sam31\n"
"diag 2,4,0x8\n"
"sam64\n"
- "brc 8, .Litfits\n"
+ "brc 8, 1f\n"
"agr 5, %5\n"
- ".Litfits: \n"
+ "1: \n"
"lgr %0,4\n"
"lgr %1,5\n"
: "=d" (return_code), "=d" (return_len)
.long sys_add_key /* 285 */
.long sys_request_key
.long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get
+ .long sys_inotify_init /* 290 */
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
/* End of entry.S */
.long sys_add_key
.long sys_request_key
.long sys_keyctl /* 315 */
+ .long sys_ioprio_set
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch /* 320 */
* The module references will be fixed up by module_frob_arch_sections.
*/
#define DOT_ALIAS2(__ret, __x, __arg1, __arg2) \
- extern __ret __x(__arg1, __arg2) \
- __attribute__((weak, alias("." # __x)));
+ extern __ret __x(__arg1, __arg2); \
+ asm(".weak " #__x);\
+ asm(#__x "=." #__x);
DOT_ALIAS2(int, div, int, int)
DOT_ALIAS2(int, mul, int, int)
extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o setup.o cpu.o idprom.o \
- traps.o devices.o auxio.o \
+ traps.o devices.o auxio.o una_asm.o \
irq.o ptrace.o time.o sys_sparc.o signal.o \
unaligned.o central.o pci.o starfire.o semaphore.o \
power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o
TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) ||
TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) ||
+ TI_RESTART_BLOCK != offsetof(struct thread_info, restart_block) ||
+ TI_KUNA_REGS != offsetof(struct thread_info, kern_una_regs) ||
+ TI_KUNA_INSN != offsetof(struct thread_info, kern_una_insn) ||
TI_FPREGS != offsetof(struct thread_info, fpregs) ||
(TI_FPREGS & (64 - 1)))
thread_info_offsets_are_bolixed_dave();
--- /dev/null
+/* una_asm.S: Kernel unaligned trap assembler helpers.
+ *
+ * Copyright (C) 1996,2005 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+ .text
+
+kernel_unaligned_trap_fault:
+ call kernel_mna_trap_fault
+ nop
+ retl
+ nop
+ .size kern_unaligned_trap_fault, .-kern_unaligned_trap_fault
+
+ .globl __do_int_store
+__do_int_store:
+ rd %asi, %o4
+ wr %o3, 0, %asi
+ ldx [%o2], %g3
+ cmp %o1, 2
+ be,pn %icc, 2f
+ cmp %o1, 4
+ be,pt %icc, 1f
+ srlx %g3, 24, %g2
+ srlx %g3, 56, %g1
+ srlx %g3, 48, %g7
+4: stba %g1, [%o0] %asi
+ srlx %g3, 40, %g1
+5: stba %g7, [%o0 + 1] %asi
+ srlx %g3, 32, %g7
+6: stba %g1, [%o0 + 2] %asi
+7: stba %g7, [%o0 + 3] %asi
+ srlx %g3, 16, %g1
+8: stba %g2, [%o0 + 4] %asi
+ srlx %g3, 8, %g7
+9: stba %g1, [%o0 + 5] %asi
+10: stba %g7, [%o0 + 6] %asi
+ ba,pt %xcc, 0f
+11: stba %g3, [%o0 + 7] %asi
+1: srl %g3, 16, %g7
+12: stba %g2, [%o0] %asi
+ srl %g3, 8, %g2
+13: stba %g7, [%o0 + 1] %asi
+14: stba %g2, [%o0 + 2] %asi
+ ba,pt %xcc, 0f
+15: stba %g3, [%o0 + 3] %asi
+2: srl %g3, 8, %g2
+16: stba %g2, [%o0] %asi
+17: stba %g3, [%o0 + 1] %asi
+0:
+ wr %o4, 0x0, %asi
+ retl
+ nop
+ .size __do_int_store, .-__do_int_store
+
+ .section __ex_table
+ .word 4b, kernel_unaligned_trap_fault
+ .word 5b, kernel_unaligned_trap_fault
+ .word 6b, kernel_unaligned_trap_fault
+ .word 7b, kernel_unaligned_trap_fault
+ .word 8b, kernel_unaligned_trap_fault
+ .word 9b, kernel_unaligned_trap_fault
+ .word 10b, kernel_unaligned_trap_fault
+ .word 11b, kernel_unaligned_trap_fault
+ .word 12b, kernel_unaligned_trap_fault
+ .word 13b, kernel_unaligned_trap_fault
+ .word 14b, kernel_unaligned_trap_fault
+ .word 15b, kernel_unaligned_trap_fault
+ .word 16b, kernel_unaligned_trap_fault
+ .word 17b, kernel_unaligned_trap_fault
+ .previous
+
+ .globl do_int_load
+do_int_load:
+ rd %asi, %o5
+ wr %o4, 0, %asi
+ cmp %o1, 8
+ bge,pn %icc, 9f
+ cmp %o1, 4
+ be,pt %icc, 6f
+4: lduba [%o2] %asi, %g2
+5: lduba [%o2 + 1] %asi, %g3
+ sll %g2, 8, %g2
+ brz,pt %o3, 3f
+ add %g2, %g3, %g2
+ sllx %g2, 48, %g2
+ srax %g2, 48, %g2
+3: ba,pt %xcc, 0f
+ stx %g2, [%o0]
+6: lduba [%o2 + 1] %asi, %g3
+ sll %g2, 24, %g2
+7: lduba [%o2 + 2] %asi, %g7
+ sll %g3, 16, %g3
+8: lduba [%o2 + 3] %asi, %g1
+ sll %g7, 8, %g7
+ or %g2, %g3, %g2
+ or %g7, %g1, %g7
+ or %g2, %g7, %g2
+ brnz,a,pt %o3, 3f
+ sra %g2, 0, %g2
+3: ba,pt %xcc, 0f
+ stx %g2, [%o0]
+9: lduba [%o2] %asi, %g2
+10: lduba [%o2 + 1] %asi, %g3
+ sllx %g2, 56, %g2
+11: lduba [%o2 + 2] %asi, %g7
+ sllx %g3, 48, %g3
+12: lduba [%o2 + 3] %asi, %g1
+ sllx %g7, 40, %g7
+ sllx %g1, 32, %g1
+ or %g2, %g3, %g2
+ or %g7, %g1, %g7
+13: lduba [%o2 + 4] %asi, %g3
+ or %g2, %g7, %g7
+14: lduba [%o2 + 5] %asi, %g1
+ sllx %g3, 24, %g3
+15: lduba [%o2 + 6] %asi, %g2
+ sllx %g1, 16, %g1
+ or %g7, %g3, %g7
+16: lduba [%o2 + 7] %asi, %g3
+ sllx %g2, 8, %g2
+ or %g7, %g1, %g7
+ or %g2, %g3, %g2
+ or %g7, %g2, %g7
+ cmp %o1, 8
+ be,a,pt %icc, 0f
+ stx %g7, [%o0]
+ srlx %g7, 32, %g2
+ sra %g7, 0, %g7
+ stx %g2, [%o0]
+ stx %g7, [%o0 + 8]
+0:
+ wr %o5, 0x0, %asi
+ retl
+ nop
+ .size __do_int_load, .-__do_int_load
+
+ .section __ex_table
+ .word 4b, kernel_unaligned_trap_fault
+ .word 5b, kernel_unaligned_trap_fault
+ .word 6b, kernel_unaligned_trap_fault
+ .word 7b, kernel_unaligned_trap_fault
+ .word 8b, kernel_unaligned_trap_fault
+ .word 9b, kernel_unaligned_trap_fault
+ .word 10b, kernel_unaligned_trap_fault
+ .word 11b, kernel_unaligned_trap_fault
+ .word 12b, kernel_unaligned_trap_fault
+ .word 13b, kernel_unaligned_trap_fault
+ .word 14b, kernel_unaligned_trap_fault
+ .word 15b, kernel_unaligned_trap_fault
+ .word 16b, kernel_unaligned_trap_fault
+ .previous
die_if_kernel(str, regs);
}
-#define do_integer_load(dest_reg, size, saddr, is_signed, asi, errh) ({ \
-__asm__ __volatile__ ( \
- "wr %4, 0, %%asi\n\t" \
- "cmp %1, 8\n\t" \
- "bge,pn %%icc, 9f\n\t" \
- " cmp %1, 4\n\t" \
- "be,pt %%icc, 6f\n" \
-"4:\t" " lduba [%2] %%asi, %%l1\n" \
-"5:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
- "sll %%l1, 8, %%l1\n\t" \
- "brz,pt %3, 3f\n\t" \
- " add %%l1, %%l2, %%l1\n\t" \
- "sllx %%l1, 48, %%l1\n\t" \
- "srax %%l1, 48, %%l1\n" \
-"3:\t" "ba,pt %%xcc, 0f\n\t" \
- " stx %%l1, [%0]\n" \
-"6:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
- "sll %%l1, 24, %%l1\n" \
-"7:\t" "lduba [%2 + 2] %%asi, %%g7\n\t" \
- "sll %%l2, 16, %%l2\n" \
-"8:\t" "lduba [%2 + 3] %%asi, %%g1\n\t" \
- "sll %%g7, 8, %%g7\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n\t" \
- "or %%l1, %%g7, %%l1\n\t" \
- "brnz,a,pt %3, 3f\n\t" \
- " sra %%l1, 0, %%l1\n" \
-"3:\t" "ba,pt %%xcc, 0f\n\t" \
- " stx %%l1, [%0]\n" \
-"9:\t" "lduba [%2] %%asi, %%l1\n" \
-"10:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
- "sllx %%l1, 56, %%l1\n" \
-"11:\t" "lduba [%2 + 2] %%asi, %%g7\n\t" \
- "sllx %%l2, 48, %%l2\n" \
-"12:\t" "lduba [%2 + 3] %%asi, %%g1\n\t" \
- "sllx %%g7, 40, %%g7\n\t" \
- "sllx %%g1, 32, %%g1\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n" \
-"13:\t" "lduba [%2 + 4] %%asi, %%l2\n\t" \
- "or %%l1, %%g7, %%g7\n" \
-"14:\t" "lduba [%2 + 5] %%asi, %%g1\n\t" \
- "sllx %%l2, 24, %%l2\n" \
-"15:\t" "lduba [%2 + 6] %%asi, %%l1\n\t" \
- "sllx %%g1, 16, %%g1\n\t" \
- "or %%g7, %%l2, %%g7\n" \
-"16:\t" "lduba [%2 + 7] %%asi, %%l2\n\t" \
- "sllx %%l1, 8, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%l1, %%g7\n\t" \
- "cmp %1, 8\n\t" \
- "be,a,pt %%icc, 0f\n\t" \
- " stx %%g7, [%0]\n\t" \
- "srlx %%g7, 32, %%l1\n\t" \
- "sra %%g7, 0, %%g7\n\t" \
- "stx %%l1, [%0]\n\t" \
- "stx %%g7, [%0 + 8]\n" \
-"0:\n\t" \
- "wr %%g0, %5, %%asi\n\n\t" \
- ".section __ex_table\n\t" \
- ".word 4b, " #errh "\n\t" \
- ".word 5b, " #errh "\n\t" \
- ".word 6b, " #errh "\n\t" \
- ".word 7b, " #errh "\n\t" \
- ".word 8b, " #errh "\n\t" \
- ".word 9b, " #errh "\n\t" \
- ".word 10b, " #errh "\n\t" \
- ".word 11b, " #errh "\n\t" \
- ".word 12b, " #errh "\n\t" \
- ".word 13b, " #errh "\n\t" \
- ".word 14b, " #errh "\n\t" \
- ".word 15b, " #errh "\n\t" \
- ".word 16b, " #errh "\n\n\t" \
- ".previous\n\t" \
- : : "r" (dest_reg), "r" (size), "r" (saddr), "r" (is_signed), \
- "r" (asi), "i" (ASI_AIUS) \
- : "l1", "l2", "g7", "g1", "cc"); \
-})
+extern void do_int_load(unsigned long *dest_reg, int size,
+ unsigned long *saddr, int is_signed, int asi);
-#define store_common(dst_addr, size, src_val, asi, errh) ({ \
-__asm__ __volatile__ ( \
- "wr %3, 0, %%asi\n\t" \
- "ldx [%2], %%l1\n" \
- "cmp %1, 2\n\t" \
- "be,pn %%icc, 2f\n\t" \
- " cmp %1, 4\n\t" \
- "be,pt %%icc, 1f\n\t" \
- " srlx %%l1, 24, %%l2\n\t" \
- "srlx %%l1, 56, %%g1\n\t" \
- "srlx %%l1, 48, %%g7\n" \
-"4:\t" "stba %%g1, [%0] %%asi\n\t" \
- "srlx %%l1, 40, %%g1\n" \
-"5:\t" "stba %%g7, [%0 + 1] %%asi\n\t" \
- "srlx %%l1, 32, %%g7\n" \
-"6:\t" "stba %%g1, [%0 + 2] %%asi\n" \
-"7:\t" "stba %%g7, [%0 + 3] %%asi\n\t" \
- "srlx %%l1, 16, %%g1\n" \
-"8:\t" "stba %%l2, [%0 + 4] %%asi\n\t" \
- "srlx %%l1, 8, %%g7\n" \
-"9:\t" "stba %%g1, [%0 + 5] %%asi\n" \
-"10:\t" "stba %%g7, [%0 + 6] %%asi\n\t" \
- "ba,pt %%xcc, 0f\n" \
-"11:\t" " stba %%l1, [%0 + 7] %%asi\n" \
-"1:\t" "srl %%l1, 16, %%g7\n" \
-"12:\t" "stba %%l2, [%0] %%asi\n\t" \
- "srl %%l1, 8, %%l2\n" \
-"13:\t" "stba %%g7, [%0 + 1] %%asi\n" \
-"14:\t" "stba %%l2, [%0 + 2] %%asi\n\t" \
- "ba,pt %%xcc, 0f\n" \
-"15:\t" " stba %%l1, [%0 + 3] %%asi\n" \
-"2:\t" "srl %%l1, 8, %%l2\n" \
-"16:\t" "stba %%l2, [%0] %%asi\n" \
-"17:\t" "stba %%l1, [%0 + 1] %%asi\n" \
-"0:\n\t" \
- "wr %%g0, %4, %%asi\n\n\t" \
- ".section __ex_table\n\t" \
- ".word 4b, " #errh "\n\t" \
- ".word 5b, " #errh "\n\t" \
- ".word 6b, " #errh "\n\t" \
- ".word 7b, " #errh "\n\t" \
- ".word 8b, " #errh "\n\t" \
- ".word 9b, " #errh "\n\t" \
- ".word 10b, " #errh "\n\t" \
- ".word 11b, " #errh "\n\t" \
- ".word 12b, " #errh "\n\t" \
- ".word 13b, " #errh "\n\t" \
- ".word 14b, " #errh "\n\t" \
- ".word 15b, " #errh "\n\t" \
- ".word 16b, " #errh "\n\t" \
- ".word 17b, " #errh "\n\n\t" \
- ".previous\n\t" \
- : : "r" (dst_addr), "r" (size), "r" (src_val), "r" (asi), "i" (ASI_AIUS)\
- : "l1", "l2", "g7", "g1", "cc"); \
-})
-
-#define do_integer_store(reg_num, size, dst_addr, regs, asi, errh) ({ \
- unsigned long zero = 0; \
- unsigned long *src_val = &zero; \
- \
- if (size == 16) { \
- size = 8; \
- zero = (((long)(reg_num ? \
- (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) | \
- (unsigned)fetch_reg(reg_num + 1, regs); \
- } else if (reg_num) src_val = fetch_reg_addr(reg_num, regs); \
- store_common(dst_addr, size, src_val, asi, errh); \
-})
-
-extern void smp_capture(void);
-extern void smp_release(void);
-
-#define do_atomic(srcdest_reg, mem, errh) ({ \
- unsigned long flags, tmp; \
- \
- smp_capture(); \
- local_irq_save(flags); \
- tmp = *srcdest_reg; \
- do_integer_load(srcdest_reg, 4, mem, 0, errh); \
- store_common(mem, 4, &tmp, errh); \
- local_irq_restore(flags); \
- smp_release(); \
-})
+extern void __do_int_store(unsigned long *dst_addr, int size,
+ unsigned long *src_val, int asi);
+
+static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
+ struct pt_regs *regs, int asi)
+{
+ unsigned long zero = 0;
+ unsigned long *src_val = &zero;
+
+ if (size == 16) {
+ size = 8;
+ zero = (((long)(reg_num ?
+ (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |
+ (unsigned)fetch_reg(reg_num + 1, regs);
+ } else if (reg_num) {
+ src_val = fetch_reg_addr(reg_num, regs);
+ }
+ __do_int_store(dst_addr, size, src_val, asi);
+}
static inline void advance(struct pt_regs *regs)
{
return !floating_point_load_or_store_p(insn);
}
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("kernel_mna_trap_fault");
-
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+void kernel_mna_trap_fault(void)
{
- unsigned long g2 = regs->u_regs [UREG_G2];
+ struct pt_regs *regs = current_thread_info()->kern_una_regs;
+ unsigned int insn = current_thread_info()->kern_una_insn;
+ unsigned long g2 = regs->u_regs[UREG_G2];
unsigned long fixup = search_extables_range(regs->tpc, &g2);
if (!fixup) {
- unsigned long address = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
+ unsigned long address;
+
+ address = compute_effective_address(regs, insn,
+ ((insn >> 25) & 0x1f));
if (address < PAGE_SIZE) {
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler");
+ printk(KERN_ALERT "Unable to handle kernel NULL "
+ "pointer dereference in mna handler");
} else
- printk(KERN_ALERT "Unable to handle kernel paging request in mna handler");
+ printk(KERN_ALERT "Unable to handle kernel paging "
+ "request in mna handler");
printk(KERN_ALERT " at virtual address %016lx\n",address);
- printk(KERN_ALERT "current->{mm,active_mm}->context = %016lx\n",
+ printk(KERN_ALERT "current->{active_,}mm->context = %016lx\n",
(current->mm ? CTX_HWBITS(current->mm->context) :
CTX_HWBITS(current->active_mm->context)));
- printk(KERN_ALERT "current->{mm,active_mm}->pgd = %016lx\n",
+ printk(KERN_ALERT "current->{active_,}mm->pgd = %016lx\n",
(current->mm ? (unsigned long) current->mm->pgd :
(unsigned long) current->active_mm->pgd));
die_if_kernel("Oops", regs);
enum direction dir = decode_direction(insn);
int size = decode_access_size(insn);
+ current_thread_info()->kern_una_regs = regs;
+ current_thread_info()->kern_una_insn = insn;
+
if (!ok_for_kernel(insn) || dir == both) {
- printk("Unsupported unaligned load/store trap for kernel at <%016lx>.\n",
- regs->tpc);
- unaligned_panic("Kernel does fpu/atomic unaligned load/store.", regs);
-
- __asm__ __volatile__ ("\n"
-"kernel_unaligned_trap_fault:\n\t"
- "mov %0, %%o0\n\t"
- "call kernel_mna_trap_fault\n\t"
- " mov %1, %%o1\n\t"
- :
- : "r" (regs), "r" (insn)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "g4", "g7", "cc");
+ printk("Unsupported unaligned load/store trap for kernel "
+ "at <%016lx>.\n", regs->tpc);
+ unaligned_panic("Kernel does fpu/atomic "
+ "unaligned load/store.", regs);
+
+ kernel_mna_trap_fault();
} else {
- unsigned long addr = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
+ unsigned long addr;
+ addr = compute_effective_address(regs, insn,
+ ((insn >> 25) & 0x1f));
#ifdef DEBUG_MNA
- printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] retpc[%016lx]\n",
- regs->tpc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]);
+ printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] "
+ "retpc[%016lx]\n",
+ regs->tpc, dirstrings[dir], addr, size,
+ regs->u_regs[UREG_RETPC]);
#endif
switch (dir) {
case load:
- do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
- size, (unsigned long *) addr,
- decode_signedness(insn), decode_asi(insn, regs),
- kernel_unaligned_trap_fault);
+ do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
+ size, (unsigned long *) addr,
+ decode_signedness(insn),
+ decode_asi(insn, regs));
break;
case store:
- do_integer_store(((insn>>25)&0x1f), size,
- (unsigned long *) addr, regs,
- decode_asi(insn, regs),
- kernel_unaligned_trap_fault);
- break;
-#if 0 /* unsupported */
- case both:
- do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
- (unsigned long *) addr,
- kernel_unaligned_trap_fault);
+ do_int_store(((insn>>25)&0x1f), size,
+ (unsigned long *) addr, regs,
+ decode_asi(insn, regs));
break;
-#endif
+
default:
panic("Impossible kernel unaligned trap.");
/* Not reached... */
{
unsigned long old_refr_count, refr_count, mctrl;
-
refr_count = (clock_tick * MCTRL0_REFR_INTERVAL);
refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
return ret;
}
+static unsigned int us2e_freq_get(unsigned int cpu)
+{
+ cpumask_t cpus_allowed;
+ unsigned long clock_tick, estar;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ cpus_allowed = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+ clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+ estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
+
+ set_cpus_allowed(current, cpus_allowed);
+
+ return clock_tick / estar_to_divisor(estar);
+}
+
static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
{
unsigned long new_bits, new_freq;
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
- new_freq = clock_tick = sparc64_get_clock_tick(cpu);
+ new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
new_bits = index_to_estar_mode(index);
divisor = index_to_divisor(index);
new_freq /= divisor;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
if (old_divisor != divisor)
- us2e_transition(estar, new_bits, clock_tick, old_divisor, divisor);
+ us2e_transition(estar, new_bits, clock_tick * 1000,
+ old_divisor, divisor);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
unsigned int new_index = 0;
if (cpufreq_frequency_table_target(policy,
- &us2e_freq_table[policy->cpu].table[0],
- target_freq,
- relation,
- &new_index))
+ &us2e_freq_table[policy->cpu].table[0],
+ target_freq, relation, &new_index))
return -EINVAL;
us2e_set_cpu_divider_index(policy->cpu, new_index);
static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
- unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+ unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
struct cpufreq_frequency_table *table =
&us2e_freq_table[cpu].table[0];
memset(us2e_freq_table, 0,
(NR_CPUS * sizeof(struct us2e_freq_percpu_info)));
+ driver->init = us2e_freq_cpu_init;
driver->verify = us2e_freq_verify;
driver->target = us2e_freq_target;
- driver->init = us2e_freq_cpu_init;
+ driver->get = us2e_freq_get;
driver->exit = us2e_freq_cpu_exit;
driver->owner = THIS_MODULE,
strcpy(driver->name, "UltraSPARC-IIe");
static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
{
- unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+ unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
unsigned long ret;
switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
return ret;
}
+static unsigned int us3_freq_get(unsigned int cpu)
+{
+ cpumask_t cpus_allowed;
+ unsigned long reg;
+ unsigned int ret;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ cpus_allowed = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+ reg = read_safari_cfg();
+ ret = get_current_freq(cpu, reg);
+
+ set_cpus_allowed(current, cpus_allowed);
+
+ return ret;
+}
+
static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
{
unsigned long new_bits, new_freq, reg;
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
- new_freq = sparc64_get_clock_tick(cpu);
+ new_freq = sparc64_get_clock_tick(cpu) / 1000;
switch (index) {
case 0:
new_bits = SAFARI_CFG_DIV_1;
static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
- unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+ unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
struct cpufreq_frequency_table *table =
&us3_freq_table[cpu].table[0];
memset(us3_freq_table, 0,
(NR_CPUS * sizeof(struct us3_freq_percpu_info)));
+ driver->init = us3_freq_cpu_init;
driver->verify = us3_freq_verify;
driver->target = us3_freq_target;
- driver->init = us3_freq_cpu_init;
+ driver->get = us3_freq_get;
driver->exit = us3_freq_cpu_exit;
driver->owner = THIS_MODULE,
strcpy(driver->name, "UltraSPARC-III");
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
} while((n >= 0) && WIFSTOPPED(status) &&
- (WSTOPSIG(status) == SIGVTALRM));
+ ((WSTOPSIG(status) == SIGVTALRM) ||
+ /* running UML inside a detached screen can cause
+ * SIGWINCHes
+ */
+ (WSTOPSIG(status) == SIGWINCH)));
if((n < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
*/
#include <elf.h>
#include <stddef.h>
-#include <asm/elf.h>
#include "init.h"
#include "elf_user.h"
#include "mem_user.h"
*/
set_cpu_sibling_map(smp_processor_id());
+ /*
+ * Wait for TSC sync to not schedule things before.
+ * We still process interrupts, which could see an inconsistent
+ * time in that window unfortunately.
+ * Do this here because TSC sync has global unprotected state.
+ */
+ tsc_sync_wait();
+
/*
* We need to hold call_lock, so there is no inconsistency
* between the time smp_call_function() determines number of
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
unlock_ipi_call_lock();
- mb();
-
- /* Wait for TSC sync to not schedule things before.
- We still process interrupts, which could see an inconsistent
- time in that window unfortunately. */
- tsc_sync_wait();
-
cpu_idle();
}
{
if (tsk->pid == 1)
return 1;
- /* Warn for strace, but not for gdb */
- if (!test_ti_thread_flag(tsk->thread_info, TIF_SYSCALL_TRACE) &&
- (tsk->ptrace & PT_PTRACED))
+ if (tsk->ptrace & PT_PTRACED)
return 0;
return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
(tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);
* if there are no busses hanging off of the current
* ldt link then both the secondary and subordinate
* bus number fields are set to 0.
+ *
+ * RED-PEN
+ * This is slightly broken because it assumes
+ * HT node IDs == Linux node ids, which is not always
+ * true. However it is probably mostly true.
*/
if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
- j++)
- pci_bus_to_node[j] = NODE_ID(nid);
+ j++) {
+ int node = NODE_ID(nid);
+ if (!node_online(node))
+ node = 0;
+ pci_bus_to_node[j] = node;
+ }
}
}
}
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER*/
-int acpi_specific_hotkey_enabled;
+int acpi_specific_hotkey_enabled = TRUE;
EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
static unsigned int acpi_irq_irq;
int __init
acpi_hotkey_setup(char *str)
{
- acpi_specific_hotkey_enabled = TRUE;
+ acpi_specific_hotkey_enabled = FALSE;
return 1;
}
-__setup("acpi_specific_hotkey", acpi_hotkey_setup);
+__setup("acpi_generic_hotkey", acpi_hotkey_setup);
/*
* max_cstate is defined in the base kernel so modules can
up(&dev->sem);
put_device(dev);
}
- return err;
+ if (err)
+ return err;
+ return count;
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
pr_debug("device class '%s': release.\n", cd->class_id);
+ if (cd->devt_attr) {
+ kfree(cd->devt_attr);
+ cd->devt_attr = NULL;
+ }
+
if (cls->release)
cls->release(cd);
else {
if (class_dev->dev)
sysfs_remove_link(&class_dev->kobj, "device");
- if (class_dev->devt_attr) {
+ if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
- kfree(class_dev->devt_attr);
- class_dev->devt_attr = NULL;
- }
class_device_remove_attrs(class_dev);
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
help
Enable support for the SyncLink Multiport (2 or 4 ports)
serial adapter, running asynchronous and HDLC communications up
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !PPC64
+ depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config BLK_DEV_IDEDMA_PMAC
bool "PowerMac IDE DMA support"
depends on BLK_DEV_IDE_PMAC
+ select BLK_DEV_IDEDMA_PCI
help
This option allows the driver for the built-in IDE controller on
Power Macintoshes and PowerBooks to use DMA (direct memory access)
unsigned long flags;
} idefloppy_floppy_t;
-#define IDEFLOPPY_TICKS_DELAY 3 /* default delay for ZIP 100 */
+#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
/*
* Floppy flag bits values.
.channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
+ },{ /* 14 */
+ .name = "Revolution",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
}
};
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
+ { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
/* Must come last. If you add entries adjust this table appropriately and the init_one code */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
{ 0, },
*
* CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
*
+ * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
+ * controller same as the CSB6. Single channel ATA100 only.
+ *
* Documentation:
* Available under NDA only. Errata info very hard to get.
*
if (!svwks_revision)
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
+ if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
+ return 2;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
u32 reg = 0;
if (isa_dev)
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+ case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
return 1;
default:
break;
btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(dev, 0x5A, btr);
}
+ /* Setup HT1000 SouthBridge Controller - Single Channel Only */
+ else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
+ pci_read_config_byte(dev, 0x5A, &btr);
+ btr &= ~0x40;
+ btr |= 0x3;
+ pci_write_config_byte(dev, 0x5A, btr);
+ }
return (dev->irq) ? dev->irq : 0;
}
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ },{ /* 4 */
+ .name = "SvrWks HT1000",
+ .init_setup = init_setup_svwks,
+ .init_chipset = init_chipset_svwks,
+ .init_hwif = init_hwif_svwks,
+ .init_dma = init_dma_svwks,
+ .channels = 1, /* 2 */
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
}
};
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+ { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
};
static struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
case PCI_DEVICE_ID_AMD_VIPER_7409:
case PCI_DEVICE_ID_CMD_643:
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+ case PCI_DEVICE_ID_REVOLUTION:
simplex_stat = hwif->INB(dma_base + 2);
hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
simplex_stat = hwif->INB(dma_base + 2);
menu "InfiniBand support"
config INFINIBAND
+ depends on PCI || BROKEN
tristate "InfiniBand support"
---help---
Core support for InfiniBand (IB). Make sure to also select
config HISAX_FRITZPCI
bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+ depends on BROKEN || !PPC64
help
This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
See <file:Documentation/isdn/README.HiSax> on how to configure it.
# on non-powerbook machines (but only on PMU based ones AFAIK)
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU
+ depends on ADB_PMU && (BROKEN || !PPC64)
help
Say Y here to build in code to manage the LCD backlight on a
Macintosh PowerBook. With this code, the backlight will be turned
{
up(&mddev->reconfig_sem);
- if (mddev->thread)
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->thread);
}
mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
mddev->raid_disks = sb->raid_disks;
mddev->size = sb->size;
mddev->events = md_event(sb);
+ mddev->bitmap_offset = 0;
if (sb->state & (1<<MD_SB_CLEAN))
mddev->recovery_cp = MaxSector;
mddev->raid_disks = le32_to_cpu(sb->raid_disks);
mddev->size = le64_to_cpu(sb->size)/2;
mddev->events = le64_to_cpu(sb->events);
+ mddev->bitmap_offset = 0;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
memcpy(mddev->uuid, sb->set_uuid, 16);
mddev->in_sync = 1;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ md_wakeup_thread(mddev->thread);
if (mddev->sb_dirty)
md_update_sb(mddev);
fput(mddev->bitmap_file);
mddev->bitmap_file = NULL;
}
+ mddev->bitmap_offset = 0;
/*
* Free resources if final stop
export_rdev(rdev);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- if (mddev->thread)
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->thread);
return err;
}
config VIDEO_M32R_AR_M64278
tristate "Use Colour AR module M64278(VGA)"
- depends on VIDEO_M32R_AR
+ depends on VIDEO_M32R_AR && PLAT_M32700UT
---help---
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
{
struct net_device *dev;
struct cp_private *cp;
+ unsigned long flags;
dev = pci_get_drvdata (pdev);
cp = netdev_priv(dev);
cp_init_hw (cp);
netif_start_queue (dev);
+
+ spin_lock_irqsave (&cp->lock, flags);
+
+ mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+
+ spin_unlock_irqrestore (&cp->lock, flags);
return 0;
}
be called ibmveth.
config IBM_EMAC
- tristate "IBM PPC4xx EMAC driver support"
+ bool "IBM PPC4xx EMAC driver support"
depends on 4xx
select CRC32
---help---
config IBM_EMAC_ERRMSG
bool "Verbose error messages"
- depends on IBM_EMAC
+ depends on IBM_EMAC && BROKEN
config IBM_EMAC_RXB
int "Number of receive buffers"
* net_device_stats
* * introduced tx_timeout function
* * reworked locking
+ *
+ * 01-Jul-2005 Ben Dooks <ben@simtec.co.uk>
+ * * fixed spinlock call without pointer
+ * * ensure spinlock is initialised
*/
#include <linux/module.h>
static int dm9000_open(struct net_device *);
static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
static int dm9000_stop(struct net_device *);
-static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
static void dm9000_timer(unsigned long);
/* Save previous register address */
reg_save = readb(db->io_addr);
- spin_lock_irqsave(db->lock,flags);
+ spin_lock_irqsave(&db->lock,flags);
netif_stop_queue(dev);
dm9000_reset(db);
/* Restore previous register address */
writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(db->lock,flags);
+ spin_unlock_irqrestore(&db->lock,flags);
}
int i;
u32 id_val;
- printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
-
/* Init network device */
ndev = alloc_etherdev(sizeof (struct board_info));
if (!ndev) {
db = (struct board_info *) ndev->priv;
memset(db, 0, sizeof (*db));
+ spin_lock_init(&db->lock);
+
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
ndev->stop = &dm9000_stop;
ndev->get_stats = &dm9000_get_stats;
ndev->set_multicast_list = &dm9000_hash_table;
- ndev->do_ioctl = &dm9000_do_ioctl;
#ifdef DM9000_PROGRAM_EEPROM
program_eeprom(db);
/* set and active a timer process */
init_timer(&db->timer);
- db->timer.expires = DM9000_TIMER_WUT * 2;
+ db->timer.expires = DM9000_TIMER_WUT;
db->timer.data = (unsigned long) dev;
db->timer.function = &dm9000_timer;
add_timer(&db->timer);
return &db->stats;
}
-/*
- * Process the upper socket ioctl command
- */
-static int
-dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- PRINTK1("entering %s\n",__FUNCTION__);
- return 0;
-}
/*
* A periodic timer routine
{
struct net_device *dev = (struct net_device *) data;
board_info_t *db = (board_info_t *) dev->priv;
- u8 reg_save;
- unsigned long flags;
PRINTK3("dm9000_timer()\n");
- spin_lock_irqsave(db->lock,flags);
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
mii_check_media(&db->mii, netif_msg_link(db), 0);
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(db->lock,flags);
-
/* Set timer again */
db->timer.expires = DM9000_TIMER_WUT;
add_timer(&db->timer);
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
+ unsigned int reg_save;
int ret;
spin_lock_irqsave(&db->lock,flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
/* The read data keeps on REG_0D & REG_0E */
ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
spin_unlock_irqrestore(&db->lock,flags);
return ret;
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
+ unsigned long reg_save;
spin_lock_irqsave(&db->lock,flags);
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
udelay(500); /* Wait write complete */
iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
spin_unlock_irqrestore(&db->lock,flags);
}
static int __init
dm9000_init(void)
{
+ printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
return driver_register(&dm9000_driver); /* search board and register */
}
};
#ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
{
emac_rxeob_dev((void *)ndev, 0);
emac_txeob_dev((void *)ndev, 0);
- return 0;
}
#endif
ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
while (ioc3_r_micr() & MICR_BUSY);
- return ioc3_r_micr() & MIDR_DATA_MASK;
+ return ioc3_r_midr_r() & MIDR_DATA_MASK;
}
static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
dev->features = NETIF_F_IP_CSUM;
#endif
- ioc3_setup_duplex(ip);
sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
goto out_stop;
mii_check_media(&ip->mii, 1, 1);
+ ioc3_setup_duplex(ip);
vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
model = (sw_physid2 >> 4) & 0x3f;
struct ethtool_drvinfo *info)
{
struct ioc3_private *ip = netdev_priv(dev);
-
+
strcpy (info->driver, IOC3_NAME);
strcpy (info->version, IOC3_VERSION);
strcpy (info->bus_info, pci_name(ip->pdev));
spin_lock_irq(&ip->ioc3_lock);
rc = mii_ethtool_sset(&ip->mii, cmd);
spin_unlock_irq(&ip->ioc3_lock);
-
+
return rc;
}
.ethtool_ops = &loopback_ethtool_ops,
};
-/* Setup and register the of the LOOPBACK device. */
+/* Setup and register the loopback device. */
int __init loopback_init(void)
{
struct net_device_stats *stats;
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.35"
-#define DRV_MODULE_RELDATE "August 6, 2005"
+#define DRV_MODULE_VERSION "3.36"
+#define DRV_MODULE_RELDATE "August 19, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
tp->phy_id = hw_phy_id;
if (hw_phy_id_masked == PHY_ID_BCM8002)
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+ else
+ tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
} else {
if (tp->phy_id != PHY_ID_INVALID) {
/* Do nothing, phy ID already set up in
config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
- depends on TR && (PCI || ISA)
+ depends on TR && (PCI || ISA && ISA_DMA_API)
select FW_LOADER
---help---
This driver provides generic support for token ring adapters
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on NET_RADIO && PCMCIA
+ depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
config PARPORT_PC
tristate "PC-style hardware"
- depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+ depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHP_H
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
}
}
-static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
+void disable_msi_mode(struct pci_dev *dev, int pos, int type)
{
u16 control;
if (!pci_msi_enable || !dev)
return status;
+ if (dev->no_msi)
+ return status;
+
temp = dev->irq;
if ((status = msi_init()) < 0)
#define pci_msi_quirk 0
#endif
+#ifdef CONFIG_PCI_MSI
+void disable_msi_mode(struct pci_dev *dev, int pos, int type);
+#else
+static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
+#endif
+
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct class_device_attribute class_device_attr_cpuaffinity;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSI);
+ dev->no_msi = 1;
+
+ printk(KERN_WARNING "PCI: PXH quirk detected, "
+ "disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
#ifdef CONFIG_PCMCIA_PROBE
+#include <asm/irq.h>
/* mask of IRQs already reserved by other cards, we should avoid using them */
static u8 pcmcia_used_irq[NR_IRQS];
#endif
if (drv->link.driver.probe) {
if (drv->link.driver.probe(&dev->dev)) {
dev->dev.driver = NULL;
+ dev->card_link = NULL;
+ up_write(&dev->dev.bus->subsys.rwsem);
return NULL;
}
}
}
/* locked by the locks in qdio_activate and qdio_cleanup */
-static __u32 * volatile
+static __u32 volatile *
qdio_get_indicator(void)
{
int i;
#define z90crypt_RELEASE 3 // 2 = PCIXCC, 3 = rewrite for coding standards
#define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support
-/**
- * If we are not using the sparse checker, __user has no use.
- */
-#ifdef __CHECKER__
-# define __user __attribute__((noderef, address_space(1)))
-#else
-# define __user
-#endif
-
/**
* struct ica_rsa_modexpo
*
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC && SCSI=y
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147 && SCSI=y
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X && SCSI=y
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
MODULE_DESCRIPTION("AHCI SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
module_init(ahci_init);
module_exit(ahci_exit);
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN && SCSI && BROKEN
help
This enables support for the Acorn SCSI card (aka30). If you have an
Acorn system with one of these, say Y. If unsure, say N.
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "1.03"
+#define DRV_VERSION "1.04"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
* spin_lock_irqsave(host_set lock)
*/
-
-
-/**
- * ata_sg_init_one - Prepare a one-entry scatter-gather list.
- * @qc: Queued command
- * @buf: transfer buffer
- * @buflen: length of buf
- *
- * Builds a single-entry scatter-gather list to initiate a
- * transfer utilizing the specified buffer.
- *
- * LOCKING:
- */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
* spin_lock_irqsave(host_set lock)
*/
-
-/**
- * ata_sg_init - Assign a scatter gather list to a queued command
- * @qc: Queued command
- * @sg: Scatter-gather list
- * @n_elem: length of sg list
- *
- * Attaches a scatter-gather list to a queued command.
- *
- * LOCKING:
- */
-
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.11" /* must be exactly four chars */
+#define DRV_VERSION "1.12" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.02"
enum {
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
config SERIAL_M32R_PLDSIO
bool "M32R SIO I/F on a PLD"
- depends on SERIAL_M32R_SIO=y
+ depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT)
default n
help
Say Y here if you want to use the M32R serial controller
return uart_set_options(port, co, baud, parity, bits, flow);
}
-extern struct uart_driver m32r_sio_reg;
+static struct uart_driver m32r_sio_reg;
static struct console m32r_sio_console = {
.name = "ttyS",
.write = m32r_sio_console_write,
return -1;
sal_console_port.sc_ops = &poll_ops;
+ spin_lock_init(&sal_console_port.sc_port.lock);
early_sn_setup(); /* Find SAL entry points */
register_console(&sal_console_early);
goto exit;
}
- x = le16_to_cpu(*(__le16 *) &data[2]);
- y = le16_to_cpu(*(__le16 *) &data[4]);
-
input_regs(dev, regs);
if (data[1] & 0x10) { /* in prox */
}
}
- if (data[1] & 0x80) {
+ if (data[1] & 0x90) {
+ x = le16_to_cpu(*(__le16 *) &data[2]);
+ y = le16_to_cpu(*(__le16 *) &data[4]);
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
- }
- if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
- input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
- input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
- input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+ if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+ input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+ input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+ input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+ input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+ }
}
input_report_key(dev, wacom->tool[0], data[1] & 0x10);
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
- return;
+ goto exit;
if (wacom->features->type >= INTUOS3) {
input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* mon_main.c: Main file, module initiation and exit, registrations, etc.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#include <linux/kernel.h>
mondir = debugfs_create_dir("usbmon", NULL);
if (IS_ERR(mondir)) {
- printk(KERN_NOTICE TAG ": debugs is not available\n");
+ printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
}
if (mondir == NULL) {
/*
* The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#ifndef __USB_MON_H
// copy the packet data to the new skb
memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- skb_return (dev, skb);
+ skb_return (dev, gl_skb);
}
// advance to the next packet
if (datalen<14)
goto resubmit;
if ((seq & IEEE80211_SCTL_FRAG) == 0) {
- frag = kmalloc(sizeof(struct zd1201_frag*),
- GFP_ATOMIC);
+ frag = kmalloc(sizeof(*frag), GFP_ATOMIC);
if (!frag)
goto resubmit;
skb = dev_alloc_skb(IEEE80211_DATA_LEN +14+2);
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
default y
help
Saying Y here will allow you to use Linux in text mode through a
int
fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
{
- int err;
+ int err, flags = info->flags;
if (var->activate & FB_ACTIVATE_INV_MODE) {
struct fb_videomode mode1, mode2;
!list_empty(&info->modelist))
err = fb_add_videomode(&mode, &info->modelist);
- if (!err && info->flags & FBINFO_MISC_USEREVENT) {
+ if (!err && (flags & FBINFO_MISC_USEREVENT)) {
struct fb_event event;
info->flags &= ~FBINFO_MISC_USEREVENT;
return -ENODEV;
}
- /* Map the fb and MMIO regions */
- dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
- (dinfo->aperture.physical, dinfo->aperture.size);
- if (!dinfo->aperture.virtual) {
- ERR_MSG("Cannot remap FB region.\n");
- cleanup(dinfo);
- return -ENODEV;
- }
- dinfo->mmio_base =
- (u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
- INTEL_REG_SIZE);
- if (!dinfo->mmio_base) {
- ERR_MSG("Cannot remap MMIO region.\n");
- cleanup(dinfo);
- return -ENODEV;
- }
-
/* Get the chipset info. */
dinfo->pci_chipset = pdev->device;
dinfo->accel = 0;
}
+ if (MB(voffset) < stolen_size)
+ offset = (stolen_size >> 12);
+ else
+ offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
+
/* Framebuffer parameters - Use all the stolen memory if >= vram */
- if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
+ if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) + MB(vram))) {
dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
+ dinfo->fb.offset = 0;
dinfo->fbmem_gart = 0;
} else {
dinfo->fb.size = MB(vram);
return -ENODEV;
}
- if (MB(voffset) < stolen_size)
- offset = (stolen_size >> 12);
- else
- offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
-
/* set the mem offsets - set them after the already used pages */
if (dinfo->accel) {
dinfo->ring.offset = offset + gtt_info.current_memory;
+ (dinfo->cursor.size >> 12);
}
+ /* Map the fb and MMIO regions */
+ /* ioremap only up to the end of used aperture */
+ dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
+ (dinfo->aperture.physical, (dinfo->fb.offset << 12)
+ + dinfo->fb.size);
+ if (!dinfo->aperture.virtual) {
+ ERR_MSG("Cannot remap FB region.\n");
+ cleanup(dinfo);
+ return -ENODEV;
+ }
+
+ dinfo->mmio_base =
+ (u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
+ INTEL_REG_SIZE);
+ if (!dinfo->mmio_base) {
+ ERR_MSG("Cannot remap MMIO region.\n");
+ cleanup(dinfo);
+ return -ENODEV;
+ }
+
/* Allocate memories (which aren't stolen) */
if (dinfo->accel) {
if (!(dinfo->gtt_ring_mem =
#include <video/radeon.h>
#include <linux/radeonfb.h>
-#define DEBUG 1
+#define DEBUG 0
#if DEBUG
#define RTRACE printk
struct dentry *dentry,
struct nameidata *nd);
static int afs_mntpt_open(struct inode *inode, struct file *file);
-static int afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd);
+static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd);
struct file_operations afs_mntpt_file_operations = {
.open = afs_mntpt_open,
/*
* follow a link from a mountpoint directory, thus causing it to be mounted
*/
-static int afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct vfsmount *newmnt;
struct dentry *old_dentry;
newmnt = afs_mntpt_do_automount(dentry);
if (IS_ERR(newmnt)) {
path_release(nd);
- return PTR_ERR(newmnt);
+ return (void *)newmnt;
}
old_dentry = nd->dentry;
}
kleave(" = %d", err);
- return err;
+ return ERR_PTR(err);
} /* end afs_mntpt_follow_link() */
/*****************************************************************************/
#include "autofs_i.h"
-static int autofs_follow_link(struct dentry *dentry, struct nameidata *nd)
+/* Nothing to release.. */
+static void *autofs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
char *s=((struct autofs_symlink *)dentry->d_inode->u.generic_ip)->data;
nd_set_link(nd, s);
- return 0;
+ return NULL;
}
struct inode_operations autofs_symlink_inode_operations = {
#include "autofs_i.h"
-static int autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct autofs_info *ino = autofs4_dentry_ino(dentry);
nd_set_link(nd, (char *)ino->u.symlink);
- return 0;
+ return NULL;
}
struct inode_operations autofs4_symlink_inode_operations = {
static void befs_destroy_inode(struct inode *inode);
static int befs_init_inodecache(void);
static void befs_destroy_inodecache(void);
-static int befs_follow_link(struct dentry *, struct nameidata *);
-static void befs_put_link(struct dentry *, struct nameidata *);
+static void *befs_follow_link(struct dentry *, struct nameidata *);
+static void befs_put_link(struct dentry *, struct nameidata *, void *);
static int befs_utf2nls(struct super_block *sb, const char *in, int in_len,
char **out, int *out_len);
static int befs_nls2utf(struct super_block *sb, const char *in, int in_len,
* The data stream become link name. Unless the LONG_SYMLINK
* flag is set.
*/
-static int
+static void *
befs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
befs_inode_info *befs_ino = BEFS_I(dentry->d_inode);
}
nd_set_link(nd, link);
- return 0;
+ return NULL;
}
-static void befs_put_link(struct dentry *dentry, struct nameidata *nd)
+static void befs_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
{
befs_inode_info *befs_ino = BEFS_I(dentry->d_inode);
if (befs_ino->i_flags & BEFS_LONG_SYMLINK) {
extern struct dentry_operations cifs_dentry_ops;
/* Functions related to symlinks */
-extern int cifs_follow_link(struct dentry *direntry, struct nameidata *nd);
-extern void cifs_put_link(struct dentry *direntry, struct nameidata *nd);
+extern void *cifs_follow_link(struct dentry *direntry, struct nameidata *nd);
+extern void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *);
extern int cifs_readlink(struct dentry *direntry, char __user *buffer,
int buflen);
extern int cifs_symlink(struct inode *inode, struct dentry *direntry,
return rc;
}
-int
+void *
cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
{
struct inode *inode = direntry->d_inode;
out_no_free:
FreeXid(xid);
nd_set_link(nd, target_path);
- return 0;
+ return NULL; /* No cookie */
}
int
return rc;
}
-void cifs_put_link(struct dentry *direntry, struct nameidata *nd)
+void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
{
char *p = nd_get_link(nd);
if (!IS_ERR(p))
return 0;
} /* End Function devfs_mknod */
-static int devfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *devfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct devfs_entry *p = get_devfs_entry_from_vfs_inode(dentry->d_inode);
nd_set_link(nd, p ? p->u.symlink.linkname : ERR_PTR(-ENODEV));
- return 0;
+ return NULL;
} /* End Function devfs_follow_link */
static struct inode_operations devfs_iops = {
#include "xattr.h"
#include <linux/namei.h>
-static int ext2_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *ext2_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct ext2_inode_info *ei = EXT2_I(dentry->d_inode);
nd_set_link(nd, (char *)ei->i_data);
- return 0;
+ return NULL;
}
struct inode_operations ext2_symlink_inode_operations = {
#include <linux/namei.h>
#include "xattr.h"
-static int ext3_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void * ext3_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct ext3_inode_info *ei = EXT3_I(dentry->d_inode);
nd_set_link(nd, (char*)ei->i_data);
- return 0;
+ return NULL;
}
struct inode_operations ext3_symlink_inode_operations = {
#include "vxfs_inode.h"
-static int vxfs_immed_follow_link(struct dentry *, struct nameidata *);
+static void * vxfs_immed_follow_link(struct dentry *, struct nameidata *);
static int vxfs_immed_readpage(struct file *, struct page *);
* Returns:
* Zero on success, else a negative error code.
*/
-static int
+static void *
vxfs_immed_follow_link(struct dentry *dp, struct nameidata *np)
{
struct vxfs_inode_info *vip = VXFS_INO(dp->d_inode);
nd_set_link(np, vip->vii_immed.vi_immed);
- return 0;
+ return NULL;
}
/**
return ERR_PTR(ret);
}
- dev->last_wd = ret;
+ dev->last_wd = watch->wd;
watch->mask = mask;
atomic_set(&watch->count, 0);
INIT_LIST_HEAD(&watch->d_list);
break;
case IOPRIO_CLASS_IDLE:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
break;
default:
return -EINVAL;
#include <linux/namei.h>
#include "nodelist.h"
-static int jffs2_follow_link(struct dentry *dentry, struct nameidata *nd);
+static void *jffs2_follow_link(struct dentry *dentry, struct nameidata *nd);
struct inode_operations jffs2_symlink_inode_operations =
{
.setattr = jffs2_setattr
};
-static int jffs2_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *jffs2_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct jffs2_inode_info *f = JFFS2_INODE_INFO(dentry->d_inode);
+ char *p = (char *)f->dents;
/*
* We don't acquire the f->sem mutex here since the only data we
* nd_set_link() call.
*/
- if (!f->dents) {
+ if (!p) {
printk(KERN_ERR "jffs2_follow_link(): can't find symlink taerget\n");
- return -EIO;
+ p = ERR_PTR(-EIO);
+ } else {
+ D1(printk(KERN_DEBUG "jffs2_follow_link(): target path is '%s'\n", (char *) f->dents));
}
- D1(printk(KERN_DEBUG "jffs2_follow_link(): target path is '%s'\n", (char *) f->dents));
- nd_set_link(nd, (char *)f->dents);
+ nd_set_link(nd, p);
/*
* We unlock the f->sem mutex but VFS will use the f->dents string. This is safe
* since the only way that may cause f->dents to be changed is iput() operation.
* But VFS will not use f->dents after iput() has been called.
*/
- return 0;
+ return NULL;
}
{
jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
+ if (is_bad_inode(inode) ||
+ (JFS_IP(inode)->fileset != cpu_to_le32(FILESYSTEM_I)))
+ return;
+
if (test_cflag(COMMIT_Freewmap, inode))
jfs_free_zero_link(inode);
static bio_end_io_t lbmIODone;
static void lbmStartIO(struct lbuf * bp);
static void lmGCwrite(struct jfs_log * log, int cant_block);
-static int lmLogSync(struct jfs_log * log, int nosyncwait);
+static int lmLogSync(struct jfs_log * log, int hard_sync);
* if new sync address is available
* (normally the case if sync() is executed by back-ground
* process).
- * if not, explicitly run jfs_blogsync() to initiate
- * getting of new sync address.
* calculate new value of i_nextsync which determines when
* this code is called again.
*
* PARAMETERS: log - log structure
- * nosyncwait - 1 if called asynchronously
+ * hard_sync - 1 to force all metadata to be written
*
* RETURN: 0
*
* serialization: LOG_LOCK() held on entry/exit
*/
-static int lmLogSync(struct jfs_log * log, int nosyncwait)
+static int lmLogSync(struct jfs_log * log, int hard_sync)
{
int logsize;
int written; /* written since last syncpt */
unsigned long flags;
/* push dirty metapages out to disk */
- list_for_each_entry(sbi, &log->sb_list, log_list) {
- filemap_flush(sbi->ipbmap->i_mapping);
- filemap_flush(sbi->ipimap->i_mapping);
- filemap_flush(sbi->direct_inode->i_mapping);
- }
+ if (hard_sync)
+ list_for_each_entry(sbi, &log->sb_list, log_list) {
+ filemap_fdatawrite(sbi->ipbmap->i_mapping);
+ filemap_fdatawrite(sbi->ipimap->i_mapping);
+ filemap_fdatawrite(sbi->direct_inode->i_mapping);
+ }
+ else
+ list_for_each_entry(sbi, &log->sb_list, log_list) {
+ filemap_flush(sbi->ipbmap->i_mapping);
+ filemap_flush(sbi->ipimap->i_mapping);
+ filemap_flush(sbi->direct_inode->i_mapping);
+ }
/*
* forward syncpt
/* next syncpt trigger = written + more */
log->nextsync = written + more;
- /* return if lmLogSync() from outside of transaction, e.g., sync() */
- if (nosyncwait)
- return lsn;
-
/* if number of bytes written from last sync point is more
* than 1/4 of the log size, stop new transactions from
* starting until all current transactions are completed
*
* FUNCTION: write log SYNCPT record for specified log
*
- * PARAMETERS: log - log structure
+ * PARAMETERS: log - log structure
+ * hard_sync - set to 1 to force metadata to be written
*/
-void jfs_syncpt(struct jfs_log *log)
+void jfs_syncpt(struct jfs_log *log, int hard_sync)
{ LOG_LOCK(log);
- lmLogSync(log, 1);
+ lmLogSync(log, hard_sync);
LOG_UNLOCK(log);
}
extern int lmGroupCommit(struct jfs_log *, struct tblock *);
extern int jfsIOWait(void *);
extern void jfs_flush_journal(struct jfs_log * log, int wait);
-extern void jfs_syncpt(struct jfs_log *log);
+extern void jfs_syncpt(struct jfs_log *log, int hard_sync);
#endif /* _H_JFS_LOGMGR */
* synchronize with logsync barrier
*/
if (test_bit(log_SYNCBARRIER, &log->flag)) {
+ TXN_UNLOCK();
+
+ /* write dirty metadata & forward log syncpt */
+ jfs_syncpt(log, 1);
+
jfs_info("log barrier off: 0x%x", log->lsn);
/* enable new transactions start */
/* wakeup all waitors for logsync barrier */
TXN_WAKEUP(&log->syncwait);
- TXN_UNLOCK();
-
- /* forward log syncpt */
- jfs_syncpt(log);
-
goto wakeup;
}
}
/* only anonymous txn.
* Remove from anon_list
*/
+ TXN_LOCK();
list_del_init(&jfs_ip->anon_inode_list);
+ TXN_UNLOCK();
}
jfs_ip->atlhead = tlck->next;
} else {
{
struct jfs_inode_info *ji = JFS_IP(inode);
+ BUG_ON(!list_empty(&ji->anon_inode_list));
+
spin_lock_irq(&ji->ag_lock);
if (ji->active_ag != -1) {
struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
/* log == NULL indicates read-only mount */
if (log) {
jfs_flush_journal(log, wait);
- jfs_syncpt(log);
+ jfs_syncpt(log, 0);
}
return 0;
#include "jfs_inode.h"
#include "jfs_xattr.h"
-static int jfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *jfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
char *s = JFS_IP(dentry->d_inode)->i_inline;
nd_set_link(nd, s);
- return 0;
+ return NULL;
}
struct inode_operations jfs_symlink_inode_operations = {
static inline int __do_follow_link(struct path *path, struct nameidata *nd)
{
int error;
+ void *cookie;
struct dentry *dentry = path->dentry;
touch_atime(path->mnt, dentry);
if (path->mnt == nd->mnt)
mntget(path->mnt);
- error = dentry->d_inode->i_op->follow_link(dentry, nd);
- if (!error) {
+ cookie = dentry->d_inode->i_op->follow_link(dentry, nd);
+ error = PTR_ERR(cookie);
+ if (!IS_ERR(cookie)) {
char *s = nd_get_link(nd);
+ error = 0;
if (s)
error = __vfs_follow_link(nd, s);
if (dentry->d_inode->i_op->put_link)
- dentry->d_inode->i_op->put_link(dentry, nd);
+ dentry->d_inode->i_op->put_link(dentry, nd, cookie);
}
dput(dentry);
mntput(path->mnt);
error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
if (!error) {
const char *new_name = old_dentry->d_name.name;
- fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
+ fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir,
+ new_dentry->d_inode, old_dentry->d_inode);
}
fsnotify_oldname_free(old_name);
int generic_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct nameidata nd;
- int res;
+ void *cookie;
+
nd.depth = 0;
- res = dentry->d_inode->i_op->follow_link(dentry, &nd);
- if (!res) {
- res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
+ cookie = dentry->d_inode->i_op->follow_link(dentry, &nd);
+ if (!IS_ERR(cookie)) {
+ int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
if (dentry->d_inode->i_op->put_link)
- dentry->d_inode->i_op->put_link(dentry, &nd);
+ dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
+ cookie = ERR_PTR(res);
}
- return res;
+ return PTR_ERR(cookie);
}
int vfs_follow_link(struct nameidata *nd, const char *link)
return res;
}
-int page_follow_link_light(struct dentry *dentry, struct nameidata *nd)
+void *page_follow_link_light(struct dentry *dentry, struct nameidata *nd)
{
- struct page *page;
+ struct page *page = NULL;
nd_set_link(nd, page_getlink(dentry, &page));
- return 0;
+ return page;
}
-void page_put_link(struct dentry *dentry, struct nameidata *nd)
+void page_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
{
- if (!IS_ERR(nd_get_link(nd))) {
- struct page *page;
- page = find_get_page(dentry->d_inode->i_mapping, 0);
- if (!page)
- BUG();
+ struct page *page = cookie;
+
+ if (page) {
kunmap(page);
page_cache_release(page);
- page_cache_release(page);
}
}
/* We requested READDIRPLUS, but the server doesn't grok it */
if (error == -ENOTSUPP && desc->plus) {
NFS_SERVER(inode)->caps &= ~NFS_CAP_READDIRPLUS;
- NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
+ clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
desc->plus = 0;
goto again;
}
goto error;
}
SetPageUptodate(page);
- NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+ spin_unlock(&inode->i_lock);
/* Ensure consistent page alignment of the data.
* Note: assumes we have exclusive access to this mapping either
* through inode->i_sem or some other mechanism.
page,
NFS_SERVER(inode)->dtsize,
desc->plus);
- NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+ spin_unlock(&inode->i_lock);
desc->page = page;
desc->ptr = kmap(page); /* matching kunmap in nfs_do_filldir */
if (desc->error >= 0) {
break;
}
if (res == -ETOOSMALL && desc->plus) {
- NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
+ clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
nfs_zap_caches(inode);
desc->plus = 0;
desc->entry->eof = 0;
{
if (IS_ROOT(dentry))
return 1;
- if ((NFS_FLAGS(dir) & NFS_INO_INVALID_ATTR) != 0
+ if ((NFS_I(dir)->cache_validity & NFS_INO_INVALID_ATTR) != 0
|| nfs_attribute_timeout(dir))
return 0;
return nfs_verify_change_attribute(dir, (unsigned long)dentry->d_fsdata);
error = nfs_revalidate_inode(NFS_SERVER(dir), dir);
if (error < 0) {
res = ERR_PTR(error);
+ unlock_kernel();
goto out;
}
int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, struct nfs_access_entry *res)
{
- struct nfs_access_entry *cache = &NFS_I(inode)->cache_access;
+ struct nfs_inode *nfsi = NFS_I(inode);
+ struct nfs_access_entry *cache = &nfsi->cache_access;
if (cache->cred != cred
|| time_after(jiffies, cache->jiffies + NFS_ATTRTIMEO(inode))
- || (NFS_FLAGS(inode) & NFS_INO_INVALID_A
Code Review / linux-3.10.git / commitdiff