* tridentfb.c by Jani Monoses
* see files above for further credits
*
- * TODO:
- *
*/
#define CYBLAFB_DEBUG 0
+#define CYBLAFB_KD_GRAPHICS_QUIRK 1
+
+#define CYBLAFB_PIXMAPSIZE 8192
#include <linux/config.h>
#include <linux/module.h>
#include <asm/types.h>
#include <video/cyblafb.h>
-#define VERSION "0.54"
+#define VERSION "0.62"
struct cyblafb_par {
u32 pseudo_pal[16];
static struct fb_fix_screeninfo cyblafb_fix __devinitdata = {
.id = "CyBla",
.type = FB_TYPE_PACKED_PIXELS,
+ .xpanstep = 1,
.ypanstep = 1,
+ .ywrapstep = 1,
.visual = FB_VISUAL_PSEUDOCOLOR,
.accel = FB_ACCEL_NONE,
};
static int fp __devinitdata;
static int crt __devinitdata;
static int memsize __devinitdata;
-static int vesafb __devinitdata;
+static int basestride;
+static int vesafb;
static int nativex;
static int center;
static int stretch;
static int pcirb = 1;
static int pciwr = 1;
static int pcirr = 1;
+static int disabled;
static int verbosity;
static int displaytype;
-static void __iomem * io_virt; // iospace virtual memory address
-
-module_param(mode,charp,0);
-module_param(bpp,int,0);
-module_param(ref,int,0);
-module_param(fp,int,0);
-module_param(crt,int,0);
-module_param(nativex,int,0);
-module_param(center,int,0);
-module_param(stretch,int,0);
-module_param(pciwb,int,0);
-module_param(pcirb,int,0);
-module_param(pciwr,int,0);
-module_param(pcirr,int,0);
-module_param(memsize,int,0);
-module_param(verbosity,int,0);
-module_param(vesafb,int,0);
+static void __iomem *io_virt; // iospace virtual memory address
+
+module_param(mode, charp, 0);
+module_param(bpp, int, 0);
+module_param(ref, int, 0);
+module_param(fp, int, 0);
+module_param(crt, int, 0);
+module_param(nativex, int, 0);
+module_param(center, int, 0);
+module_param(stretch, int, 0);
+module_param(pciwb, int, 0);
+module_param(pcirb, int, 0);
+module_param(pciwr, int, 0);
+module_param(pcirr, int, 0);
+module_param(memsize, int, 0);
+module_param(verbosity, int, 0);
+
+//=========================================
+//
+// Well, we have to fix the upper layers.
+// Until this has been done, we work around
+// the bugs.
+//
+//=========================================
+
+#if (CYBLAFB_KD_GRAPHICS_QUIRK && CYBLAFB_DEBUG)
+ if (disabled) { \
+ printk("********\n");\
+ dump_stack();\
+ return val;\
+ }
+
+#elif CYBLAFB_KD_GRAPHICS_QUIRK
+#define KD_GRAPHICS_RETURN(val)\
+ if (disabled) {\
+ return val;\
+ }
+#else
+#define KD_GRAPHICS_RETURN(val)
+#endif
//=========================================
//
//
//=========================================
-#define out8(r,v) writeb(v,io_virt+r)
-#define out32(r,v) writel(v,io_virt+r)
-#define in8(r) readb(io_virt+r)
-#define in32(r) readl(io_virt+r)
+#define out8(r, v) writeb(v, io_virt + r)
+#define out32(r, v) writel(v, io_virt + r)
+#define in8(r) readb(io_virt + r)
+#define in32(r) readl(io_virt + r)
//======================================
//
//
//======================================
-static inline unsigned char read3X4(int reg)
+static inline u8 read3X4(u32 reg)
{
- out8(0x3D4,reg);
+ out8(0x3D4, reg);
return in8(0x3D5);
}
-static inline unsigned char read3C4(int reg)
+static inline u8 read3C4(u32 reg)
{
- out8(0x3C4,reg);
+ out8(0x3C4, reg);
return in8(0x3C5);
}
-static inline unsigned char read3CE(int reg)
+static inline u8 read3CE(u32 reg)
{
- out8(0x3CE,reg);
+ out8(0x3CE, reg);
return in8(0x3CF);
}
-static inline void write3X4(int reg,unsigned char val)
+static inline void write3X4(u32 reg, u8 val)
{
- out8(0x3D4,reg);
- out8(0x3D5,val);
+ out8(0x3D4, reg);
+ out8(0x3D5, val);
}
-static inline void write3C4(int reg,unsigned char val)
+static inline void write3C4(u32 reg, u8 val)
{
- out8(0x3C4,reg);
- out8(0x3C5,val);
+ out8(0x3C4, reg);
+ out8(0x3C5, val);
}
-static inline void write3CE(int reg,unsigned char val)
+static inline void write3CE(u32 reg, u8 val)
{
- out8(0x3CE,reg);
- out8(0x3CF,val);
+ out8(0x3CE, reg);
+ out8(0x3CF, val);
}
-static inline void write3C0(int reg,unsigned char val)
+static inline void write3C0(u32 reg, u8 val)
{
- in8(0x3DA); // read to reset index
- out8(0x3C0,reg);
- out8(0x3C0,val);
+ in8(0x3DA); // read to reset index
+ out8(0x3C0, reg);
+ out8(0x3C0, val);
}
//=================================================
//
//=================================================
-static inline void enable_mmio(void)
+static void enable_mmio(void)
{
- int tmp;
+ u8 tmp;
- outb(0x0B,0x3C4);
+ outb(0x0B, 0x3C4);
inb(0x3C5); // Set NEW mode
- outb(SR0E,0x3C4); // write enable a lot of extended ports
- outb(0x80,0x3C5);
+ outb(SR0E, 0x3C4); // write enable a lot of extended ports
+ outb(0x80, 0x3C5);
- outb(SR11,0x3C4); // write enable those extended ports that
- outb(0x87,0x3C5); // are not affected by SR0E_New
+ outb(SR11, 0x3C4); // write enable those extended ports that
+ outb(0x87, 0x3C5); // are not affected by SR0E_New
- outb(CR1E,0x3d4); // clear write protect bit for port 0x3c2
- tmp=inb(0x3d5) & 0xBF;
- outb(CR1E,0x3d4);
- outb(tmp,0x3d5);
+ outb(CR1E, 0x3d4); // clear write protect bit for port 0x3c2
+ tmp = inb(0x3d5) & 0xBF;
+ outb(CR1E, 0x3d4);
+ outb(tmp, 0x3d5);
- outb(CR39,0x3D4);
- outb(inb(0x3D5)|0x01,0x3D5); // Enable mmio, everything else untouched
+ outb(CR39, 0x3D4);
+ outb(inb(0x3D5) | 0x01, 0x3D5); // Enable mmio
}
//=================================================
//
// Set pixel clock VCLK1
-// - multipliers set elswhere
-// - freq in units of 0.01 MHz
+// - multipliers set elswhere
+// - freq in units of 0.01 MHz
+//
+// Hardware bug: SR18 >= 250 is broken for the
+// cyberblade/i1
//
//=================================================
static void set_vclk(struct cyblafb_par *par, int freq)
{
- u32 m,n,k;
- int f,fi,d,di;
- u8 lo=0,hi=0;
+ u32 m, n, k;
+ int f, fi, d, di;
+ u8 lo = 0, hi = 0;
d = 2000;
k = freq >= 10000 ? 0 : freq >= 5000 ? 1 : freq >= 2500 ? 2 : 3;
- for(m = 0;m<64;m++)
- for(n = 0;n<250;n++) { // max 249 is a hardware limit for cybla/i1 !
- fi = (int)(((5864727*(n+8))/((m+2)*(1<<k)))>>12);
- if ((di = abs(fi - freq)) < d) {
- d = di;
- f = fi;
- lo = (u8) n;
- hi = (u8) ((k<<6) | m);
+ for (m = 0; m < 64; m++)
+ for (n = 0; n < 250; n++) {
+ fi = (int)(((5864727 * (n + 8)) /
+ ((m + 2) * (1 << k))) >> 12);
+ if ((di = abs(fi - freq)) < d) {
+ d = di;
+ f = fi;
+ lo = (u8) n;
+ hi = (u8) ((k << 6) | m);
+ }
}
- }
- write3C4(SR19,hi);
- write3C4(SR18,lo);
- if(verbosity > 1)
+ write3C4(SR19, hi);
+ write3C4(SR18, lo);
+ if (verbosity > 0)
output("pixclock = %d.%02d MHz, k/m/n %x %x %x\n",
- freq/100,freq%100,(hi&0xc0)>>6,hi&0x3f,lo);
+ freq / 100, freq % 100, (hi & 0xc0) >> 6, hi & 0x3f, lo);
}
//================================================
//
//================================================
-static void cyblafb_setup_GE(int pitch,int bpp)
+static void cyblafb_setup_GE(int pitch, int bpp)
{
- int base = (pitch>>3)<<20;
+ KD_GRAPHICS_RETURN();
switch (bpp) {
- case 8: base |= (0<<29); break;
- case 15: base |= (5<<29); break;
- case 16: base |= (1<<29); break;
- case 24:
- case 32: base |= (2<<29); break;
+ case 8:
+ basestride = ((pitch >> 3) << 20) | (0 << 29);
+ break;
+ case 15:
+ basestride = ((pitch >> 3) << 20) | (5 << 29);
+ break;
+ case 16:
+ basestride = ((pitch >> 3) << 20) | (1 << 29);
+ break;
+ case 24:
+ case 32:
+ basestride = ((pitch >> 3) << 20) | (2 << 29);
+ break;
}
- write3X4(CR36,0x90); // reset GE
- write3X4(CR36,0x80); // enable GE
-
- out32(GE24,1<<7); // reset all GE pointers
- out32(GE24,0);
-
- write3X4(CR2D,0x00); // GE Timinigs, no delays
-
- out32(GEB8,base); // Destination Stride / Buffer Base 0, p 133
- out32(GEBC,base); // Destination Stride / Buffer Base 1, p 133
- out32(GEC0,base); // Destination Stride / Buffer Base 2, p 133
- out32(GEC4,base); // Destination Stride / Buffer Base 3, p 133
- out32(GEC8,base); // Source Stride / Buffer Base 0, p 133
- out32(GECC,base); // Source Stride / Buffer Base 1, p 133
- out32(GED0,base); // Source Stride / Buffer Base 2, p 133
- out32(GED4,base); // Source Stride / Buffer Base 3, p 133
- out32(GE6C,0); // Pattern and Style, p 129, ok
+ write3X4(CR36, 0x90); // reset GE
+ write3X4(CR36, 0x80); // enable GE
+ out32(GE24, 1 << 7); // reset all GE pointers by toggling
+ out32(GE24, 0); // d7 of GE24
+ write3X4(CR2D, 0x00); // GE Timinigs, no delays
+ out32(GE6C, 0); // Pattern and Style, p 129, ok
}
//=====================================================================
//
-// Although this is a .fb_sync function that could be enabled in
-// cyblafb_ops, we do not include it there. We sync immediately before
-// new GE operations to improve performance.
+// Cyberblade specific syncing
+//
+// A timeout might be caused by disabled mmio.
+// Cause:
+// - bit CR39 & 1 == 0 upon return, X trident driver bug
+// - kdm bug (KD_GRAPHICS not set on first switch)
+// - kernel design flaw (it believes in the correctness
+// of kdm/X
+// First we try to sync ignoring that problem, as most of the
+// time that will succeed immediately and the enable_mmio()
+// would only degrade performance.
//
//=====================================================================
static int cyblafb_sync(struct fb_info *info)
{
- int status, i=100000;
- while( ((status=in32(GE20)) & 0xFA800000) && i != 0)
+ u32 status, i = 100000;
+
+ KD_GRAPHICS_RETURN(0);
+
+ while (((status = in32(GE20)) & 0xFe800000) && i != 0)
i--;
if (i == 0) {
- // The timeout might be caused by disabled mmio.
- // Cause:
- // - bit CR39 & 1 == 0 upon return, X trident driver bug
- // - kdm bug (KD_GRAPHICS not set on first switch)
- // - kernel design flaw (it believes in the correctness
- // of kdm/X
- // So we make sure that mmio is enabled first ...
enable_mmio();
-// show_trace(NULL,&status);
- i=1000000;
- while( ((status=in32(GE20)) & 0xFA800000) && i != 0)
+ i = 1000000;
+ while (((status = in32(GE20)) & 0xFA800000) && i != 0)
i--;
if (i == 0) {
- output("GE Timeout, status: %x\n",status);
- if(status & 0x80000000)
+ output("GE Timeout, status: %x\n", status);
+ if (status & 0x80000000)
output("Bresenham Engine : Busy\n");
- if(status & 0x40000000)
+ if (status & 0x40000000)
output("Setup Engine : Busy\n");
- if(status & 0x20000000)
+ if (status & 0x20000000)
output("SP / DPE : Busy\n");
- if(status & 0x10000000)
+ if (status & 0x10000000)
output("Memory Interface : Busy\n");
- if(status & 0x08000000)
+ if (status & 0x08000000)
output("Com Lst Proc : Busy\n");
- if(status & 0x04000000)
+ if (status & 0x04000000)
output("Block Write : Busy\n");
- if(status & 0x02000000)
+ if (status & 0x02000000)
output("Command Buffer : Full\n");
- if(status & 0x01000000)
+ if (status & 0x01000000)
output("RESERVED : Busy\n");
- if(status & 0x00800000)
+ if (status & 0x00800000)
output("PCI Write Buffer : Busy\n");
cyblafb_setup_GE(info->var.xres,
info->var.bits_per_pixel);
//
//==============================
-static void cyblafb_fillrect(struct fb_info * info,
- const struct fb_fillrect *fr)
+static void cyblafb_fillrect(struct fb_info *info, const struct fb_fillrect *fr)
{
- int bpp = info->var.bits_per_pixel;
- int col;
+ u32 bpp = info->var.bits_per_pixel, col, desty, height;
+
+ KD_GRAPHICS_RETURN();
switch (bpp) {
- default:
- case 8: col = fr->color;
- col |= col <<8;
- col |= col <<16;
- break;
- case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
- col |= col <<16;
- break;
- case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
- break;
+ default:
+ case 8:
+ col = fr->color;
+ col |= col << 8;
+ col |= col << 16;
+ break;
+ case 16:
+ col = ((u32 *) (info->pseudo_palette))[fr->color];
+ col |= col << 16;
+ break;
+ case 32:
+ col = ((u32 *) (info->pseudo_palette))[fr->color];
+ break;
}
- cyblafb_sync(info);
-
- out32(GE60,col);
- out32(GE48,fr->rop ? 0x66:ROP_S);
- out32(GE44,0x20000000|1<<19|1<<4|2<<2);
- out32(GE08,point(fr->dx,fr->dy));
- out32(GE0C,point(fr->dx+fr->width-1,fr->dy+fr->height-1));
-
+ desty = fr->dy;
+ height = fr->height;
+ while (height) {
+ out32(GEB8, basestride | ((desty * info->var.xres_virtual *
+ bpp) >> 6));
+ out32(GE60, col);
+ out32(GE48, fr->rop ? 0x66 : ROP_S);
+ out32(GE44, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
+ out32(GE08, point(fr->dx, 0));
+ out32(GE0C, point(fr->dx + fr->width - 1,
+ height > 4096 ? 4095 : height - 1));
+ if (likely(height <= 4096))
+ return;
+ desty += 4096;
+ height -= 4096;
+ }
}
-//==============================
+//================================================
//
// Cyberblade specific copyarea
//
-//==============================
+// This function silently assumes that it never
+// will be called with width or height exceeding
+// 4096.
+//
+//================================================
-static void cyblafb_copyarea(struct fb_info *info,
- const struct fb_copyarea *ca)
+static void cyblafb_copyarea(struct fb_info *info, const struct fb_copyarea *ca)
{
- __u32 s1,s2,d1,d2;
- int direction;
+ u32 s1, s2, d1, d2, direction;
+
+ KD_GRAPHICS_RETURN();
+
+ s1 = point(ca->sx, 0);
+ s2 = point(ca->sx + ca->width - 1, ca->height - 1);
+ d1 = point(ca->dx, 0);
+ d2 = point(ca->dx + ca->width - 1, ca->height - 1);
- s1 = point(ca->sx,ca->sy);
- s2 = point(ca->sx+ca->width-1,ca->sy+ca->height-1);
- d1 = point(ca->dx,ca->dy);
- d2 = point(ca->dx+ca->width-1,ca->dy+ca->height-1);
if ((ca->sy > ca->dy) || ((ca->sy == ca->dy) && (ca->sx > ca->dx)))
direction = 0;
else
direction = 2;
- cyblafb_sync(info);
-
- out32(GE44,0xa0000000|1<<19|1<<2|direction);
- out32(GE00,direction?s2:s1);
- out32(GE04,direction?s1:s2);
- out32(GE08,direction?d2:d1);
- out32(GE0C,direction?d1:d2);
-
+ out32(GEB8, basestride | ((ca->dy * info->var.xres_virtual *
+ info->var.bits_per_pixel) >> 6));
+ out32(GEC8, basestride | ((ca->sy * info->var.xres_virtual *
+ info->var.bits_per_pixel) >> 6));
+ out32(GE44, 0xa0000000 | 1 << 19 | 1 << 2 | direction);
+ out32(GE00, direction ? s2 : s1);
+ out32(GE04, direction ? s1 : s2);
+ out32(GE08, direction ? d2 : d1);
+ out32(GE0C, direction ? d1 : d2);
}
//=======================================================================
//
// Cyberblade specific imageblit
//
-// Accelerated for the most usual case, blitting 1-bit deep character
-// character images. Everything else is passed to the generic imageblit.
+// Accelerated for the most usual case, blitting 1 - bit deep
+// character images. Everything else is passed to the generic imageblit
+// unless it is so insane that it is better to printk an alert.
+//
+// Hardware bug: _Never_ blit across pixel column 2048, that will lock
+// the system. We split those blit requests into three blitting
+// operations.
//
//=======================================================================
static void cyblafb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
-
u32 fgcol, bgcol;
+ u32 *pd = (u32 *) image->data;
+ u32 bpp = info->var.bits_per_pixel;
- int i;
- int bpp = info->var.bits_per_pixel;
- int index = 0;
- int index_end=image->height * image->width / 8;
- int width_dds=image->width / 32;
- int width_dbs=image->width % 32;
-
- if (image->depth != 1 || bpp < 8 || bpp > 32 || bpp % 8 != 0 ||
- image->width % 8 != 0 || image->width == 0 || image->height == 0) {
- cfb_imageblit(info,image);
+ KD_GRAPHICS_RETURN();
+
+ // Used only for drawing the penguine (image->depth > 1)
+ if (image->depth != 1) {
+ cfb_imageblit(info, image);
+ return;
+ }
+ // That should never happen, but it would be fatal
+ if (image->width == 0 || image->height == 0) {
+ output("imageblit: width/height 0 detected\n");
return;
}
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- fgcol = ((u32*)(info->pseudo_palette))[image->fg_color];
- bgcol = ((u32*)(info->pseudo_palette))[image->bg_color];
+ fgcol = ((u32 *) (info->pseudo_palette))[image->fg_color];
+ bgcol = ((u32 *) (info->pseudo_palette))[image->bg_color];
} else {
fgcol = image->fg_color;
bgcol = image->bg_color;
}
switch (bpp) {
- case 8:
- fgcol |= fgcol <<8; fgcol |= fgcol <<16;
- bgcol |= bgcol <<8; bgcol |= bgcol <<16;
- break;
- case 16:
- fgcol |= fgcol <<16;
- bgcol |= bgcol <<16;
- break;
- default:
- break;
+ case 8:
+ fgcol |= fgcol << 8;
+ bgcol |= bgcol << 8;
+ case 16:
+ fgcol |= fgcol << 16;
+ bgcol |= bgcol << 16;
+ default:
+ break;
}
- cyblafb_sync(info);
-
- out32(GE60,fgcol);
- out32(GE64,bgcol);
- out32(GE44,0xa0000000 | 1<<20 | 1<<19);
- out32(GE08,point(image->dx,image->dy));
- out32(GE0C,point(image->dx+image->width-1,image->dy+image->height-1));
+ out32(GEB8, basestride | ((image->dy * info->var.xres_virtual *
+ bpp) >> 6));
+ out32(GE60, fgcol);
+ out32(GE64, bgcol);
+
+ if (!(image->dx < 2048 && (image->dx + image->width - 1) >= 2048)) {
+ u32 dds = ((image->width + 31) >> 5) * image->height;
+ out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
+ out32(GE08, point(image->dx, 0));
+ out32(GE0C, point(image->dx + image->width - 1,
+ image->height - 1));
+ while (dds--)
+ out32(GE9C, *pd++);
+ } else {
+ int i, j;
+ u32 ddstotal = (image->width + 31) >> 5;
+ u32 ddsleft = (2048 - image->dx + 31) >> 5;
+ u32 skipleft = ddstotal - ddsleft;
+
+ out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
+ out32(GE08, point(image->dx, 0));
+ out32(GE0C, point(2048 - 1, image->height - 1));
+ for (i = 0; i < image->height; i++) {
+ for (j = 0; j < ddsleft; j++)
+ out32(GE9C, *pd++);
+ pd += skipleft;
+ }
- while(index < index_end) {
- for(i=0;i<width_dds;i++) {
- out32(GE9C,*((u32*) ((u32)image->data + index)));
- index+=4;
+ if (image->dx % 32) {
+ out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
+ out32(GE08, point(2048, 0));
+ if (image->width > ddsleft << 5)
+ out32(GE0C, point(image->dx + (ddsleft << 5) -
+ 1, image->height - 1));
+ else
+ out32(GE0C, point(image->dx + image->width - 1,
+ image->height - 1));
+ pd = ((u32 *) image->data) + ddstotal - skipleft - 1;
+ for (i = 0; i < image->height; i++) {
+ out32(GE9C, swab32(swab32(*pd) << ((32 -
+ (image->dx & 31)) & 31)));
+ pd += ddstotal;
+ }
}
- switch(width_dbs) {
- case 0: break;
- case 8: out32(GE9C,*((u8*)((u32)image->data+index)));
- index+=1;
- break;
- case 16: out32(GE9C,*((u16*)((u32)image->data+index)));
- index+=2;
- break;
- case 24: out32(GE9C,(u32)(*((u16*)((u32)image->data+index))) |
- (u32)(*((u8*)((u32)image->data+index+2)))<<16);
- index+=3;
- break;
+
+ if (skipleft) {
+ out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
+ out32(GE08, point(image->dx + (ddsleft << 5), 0));
+ out32(GE0C, point(image->dx + image->width - 1,
+ image->height - 1));
+ pd = (u32 *) image->data;
+ for (i = 0; i < image->height; i++) {
+ pd += ddsleft;
+ for (j = 0; j < skipleft; j++)
+ out32(GE9C, *pd++);
+ }
}
}
}
struct fb_info *info)
{
int bpp = var->bits_per_pixel;
- int s,t,maxvyres;
//
// we try to support 8, 16, 24 and 32 bpp modes,
// (This is what tridentfb does ... will be changed in the future)
//
//
- if ( bpp % 8 != 0 || bpp < 8 || bpp >32)
+ if (bpp % 8 != 0 || bpp < 8 || bpp > 32)
bpp = 8;
- if (bpp == 24 )
+ if (bpp == 24)
bpp = var->bits_per_pixel = 32;
//
return -EINVAL;
//
- // xres != xres_virtual is broken, fail if such an
- // unusual mode is requested
+ // we do not allow vclk to exceed 230 MHz. If the requested
+ // vclk is too high, we default to 200 MHz
//
- if (var->xres != var->xres_virtual)
- return -EINVAL;
+ if ((bpp == 32 ? 200000000 : 100000000) / var->pixclock > 23000)
+ var->pixclock = (bpp == 32 ? 200000000 : 100000000) / 20000;
//
- // we do not allow vclk to exceed 230 MHz
+ // enforce (h|v)sync_len limits
//
- if ((bpp==32 ? 200000000 : 100000000) / var->pixclock > 23000)
- return -EINVAL;
+ var->hsync_len &= ~7;
+ if(var->hsync_len > 248)
+ var->hsync_len = 248;
+
+ var->vsync_len &= 15;
//
- // calc max yres_virtual that would fit in memory
- // and max yres_virtual that could be used for scrolling
- // and use minimum of the results as maxvyres
- //
- // adjust vyres_virtual to maxvyres if necessary
- // fail if requested yres is bigger than maxvyres
+ // Enforce horizontal and vertical hardware limits.
+ // 1600x1200 is mentioned as a maximum, but higher resolutions could
+ // work with slow refresh, small margins and short sync.
//
- s = (0x1fffff / (var->xres * bpp/8)) + var->yres;
- t = info->fix.smem_len / (var->xres * bpp/8);
- maxvyres = t < s ? t : s;
- if (maxvyres < var->yres_virtual)
- var->yres_virtual=maxvyres;
- if (maxvyres < var->yres)
+ var->xres &= ~7;
+
+ if (((var->xres + var->left_margin + var->right_margin +
+ var->hsync_len) > (bpp == 32 ? 2040 : 4088)) ||
+ ((var->yres + var->upper_margin + var->lower_margin +
+ var->vsync_len) > 2047))
return -EINVAL;
- switch (bpp) {
- case 8:
- var->red.offset = 0;
- var->green.offset = 0;
- var->blue.offset = 0;
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- break;
- case 16:
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- var->red.length = 5;
- var->green.length = 6;
- var->blue.length = 5;
- break;
- case 32:
- var->red.offset = 16;
- var->green.offset = 8;
- var->blue.offset = 0;
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- break;
- default:
+ if ((var->xres > 1600) || (var->yres > 1200))
+ output("Mode %dx%d exceeds documented limits.\n",
+ var->xres, var->yres);
+ //
+ // try to be smart about (x|y)res_virtual problems.
+ //
+ if (var->xres > var->xres_virtual)
+ var->xres_virtual = var->xres;
+ if (var->yres > var->yres_virtual)
+ var->yres_virtual = var->yres;
+
+ if (bpp == 8 || bpp == 16) {
+ if (var->xres_virtual > 4088)
+ var->xres_virtual = 4088;
+ } else {
+ if (var->xres_virtual > 2040)
+ var->xres_virtual = 2040;
+ }
+ var->xres_virtual &= ~7;
+ while (var->xres_virtual * var->yres_virtual * bpp / 8 >
+ info->fix.smem_len) {
+ if (var->yres_virtual > var->yres)
+ var->yres_virtual--;
+ else if (var->xres_virtual > var->xres)
+ var->xres_virtual -= 8;
+ else
return -EINVAL;
}
- return 0;
+ switch (bpp) {
+ case 8:
+ var->red.offset = 0;
+ var->green.offset = 0;
+ var->blue.offset = 0;
+ var->red.length = 6;
+ var->green.length = 6;
+ var->blue.length = 6;
+ break;
+ case 16:
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ break;
+ case 32:
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
}
//=====================================================================
// it, so it is also safe to be used here. BTW: datasheet CR0E on page
// 90 really is CR1E, the real CRE is documented on page 72.
//
+// BUT:
+//
+// As of internal version 0.60 we do not use vga panning any longer.
+// Vga panning did not allow us the use of all available video memory
+// and thus prevented ywrap scrolling. We do use the "right view"
+// register now.
+//
+//
//=====================================================================
static int cyblafb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- unsigned int offset;
+ KD_GRAPHICS_RETURN(0);
- offset=(var->xoffset+(var->yoffset*var->xres))*var->bits_per_pixel/32;
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
-
- write3X4(CR0D,offset & 0xFF);
- write3X4(CR0C,(offset & 0xFF00) >> 8);
- write3X4(CR1E,(read3X4(CR1E) & 0xDF) | ((offset & 0x10000) >> 11));
- write3X4(CR27,(read3X4(CR27) & 0xF8) | ((offset & 0xE0000) >> 17));
- write3X4(CR2B,(read3X4(CR2B) & 0xDF) | ((offset & 0x100000) >> 15));
-
+ out32(GE10, 0x80000000 | ((var->xoffset + (var->yoffset *
+ var->xres_virtual)) * var->bits_per_pixel / 32));
return 0;
}
return;
printk("\n");
- for(i=0; i<=0xff; i++) {
- outb(i,0x3d4);
- printk("CR%02x=%02x ",i,inb(0x3d5));
- if (i%16==15)
+ for (i = 0; i <= 0xff; i++) {
+ outb(i, 0x3d4);
+ printk("CR%02x=%02x ", i, inb(0x3d5));
+ if (i % 16 == 15)
printk("\n");
}
- outb(0x30,0x3ce);
- outb(inb(0x3cf) | 0x40,0x3cf);
- for(i=0; i<=0x1f; i++) {
- if (i==0 || (i>2 && i<8) || i==0x10 || i==0x11 || i==0x16) {
- outb(i,0x3d4);
- printk("CR%02x=%02x ",i,inb(0x3d5));
+ outb(0x30, 0x3ce);
+ outb(inb(0x3cf) | 0x40, 0x3cf);
+ for (i = 0; i <= 0x1f; i++) {
+ if (i == 0 || (i > 2 && i < 8) || i == 0x10 || i == 0x11
+ || i == 0x16) {
+ outb(i, 0x3d4);
+ printk("CR%02x=%02x ", i, inb(0x3d5));
} else
printk("------- ");
- if (i%16==15)
+ if (i % 16 == 15)
printk("\n");
}
- outb(0x30,0x3ce);
- outb(inb(0x3cf) & 0xbf,0x3cf);
+ outb(0x30, 0x3ce);
+ outb(inb(0x3cf) & 0xbf, 0x3cf);
printk("\n");
- for(i=0; i<=0x7f; i++) {
- outb(i,0x3ce);
- printk("GR%02x=%02x ",i,inb(0x3cf));
- if (i%16==15)
+ for (i = 0; i <= 0x7f; i++) {
+ outb(i, 0x3ce);
+ printk("GR%02x=%02x ", i, inb(0x3cf));
+ if (i % 16 == 15)
printk("\n");
}
printk("\n");
- for(i=0; i<=0xff; i++) {
- outb(i,0x3c4);
- printk("SR%02x=%02x ",i,inb(0x3c5));
- if (i%16==15)
+ for (i = 0; i <= 0xff; i++) {
+ outb(i, 0x3c4);
+ printk("SR%02x=%02x ", i, inb(0x3c5));
+ if (i % 16 == 15)
printk("\n");
}
printk("\n");
- for(i=0; i <= 0x1F; i++) {
- inb(0x3da); // next access is index!
- outb(i,0x3c0);
- printk("AR%02x=%02x ",i,inb(0x3c1));
- if (i%16==15)
+ for (i = 0; i <= 0x1F; i++) {
+ inb(0x3da); // next access is index!
+ outb(i, 0x3c0);
+ printk("AR%02x=%02x ", i, inb(0x3c1));
+ if (i % 16 == 15)
printk("\n");
}
printk("\n");
- inb(0x3DA); // reset internal flag to 3c0 index
- outb(0x20,0x3C0); // enable attr
+ inb(0x3DA); // reset internal flag to 3c0 index
+ outb(0x20, 0x3C0); // enable attr
+
+ return;
+}
+
+//=======================================================================
+//
+// Save State
+//
+// This function is called while a switch to KD_TEXT is in progress,
+// before any of the other functions are called.
+//
+//=======================================================================
+static void cyblafb_save_state(struct fb_info *info)
+{
+ struct cyblafb_par *par = info->par;
+ if (verbosity > 0)
+ output("Switching to KD_TEXT\n");
+ disabled = 0;
+ regdump(par);
+ enable_mmio();
+ return;
+}
+
+//=======================================================================
+//
+// Restore State
+//
+// This function is called while a switch to KD_GRAPHICS is in progress,
+// We have to turn on vga style panning registers again because the
+// trident driver of X does not know about GE10.
+//
+//=======================================================================
+
+static void cyblafb_restore_state(struct fb_info *info)
+{
+ if (verbosity > 0)
+ output("Switching to KD_GRAPHICS\n");
+ out32(GE10, 0);
+ disabled = 1;
return;
}
static int cyblafb_set_par(struct fb_info *info)
{
struct cyblafb_par *par = info->par;
- u32
- htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,preendfetch,
- vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend;
+ u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart,
+ hblankend, preendfetch, vtotal, vdispend, vsyncstart,
+ vsyncend, vblankstart, vblankend;
struct fb_var_screeninfo *var = &info->var;
int bpp = var->bits_per_pixel;
int i;
+ KD_GRAPHICS_RETURN(0);
+
if (verbosity > 0)
output("Switching to new mode: "
"fbset -g %d %d %d %d %d -t %d %d %d %d %d %d %d\n",
- var->xres,var->yres,var->xres_virtual,
- var->yres_virtual,var->bits_per_pixel,var->pixclock,
- var->left_margin,var->right_margin,var->upper_margin,
- var->lower_margin,var->hsync_len,var->vsync_len);
+ var->xres, var->yres, var->xres_virtual,
+ var->yres_virtual, var->bits_per_pixel, var->pixclock,
+ var->left_margin, var->right_margin, var->upper_margin,
+ var->lower_margin, var->hsync_len, var->vsync_len);
htotal = (var->xres + var->left_margin + var->right_margin +
- var->hsync_len) / 8 - 5;
- hdispend = var->xres/8 - 1;
- hsyncstart = (var->xres + var->right_margin)/8;
- hsyncend = var->hsync_len/8;
+ var->hsync_len) / 8 - 5;
+ hdispend = var->xres / 8 - 1;
+ hsyncstart = (var->xres + var->right_margin) / 8;
+ hsyncend = var->hsync_len / 8;
hblankstart = hdispend + 1;
hblankend = htotal + 3; // should be htotal + 5, bios does it this way
- preendfetch = ((var->xres >> 3) + 1) * ((bpp+1) >> 3);
+ preendfetch = ((var->xres >> 3) + 1) * ((bpp + 1) >> 3);
vtotal = var->yres + var->upper_margin + var->lower_margin +
- var->vsync_len - 2;
+ var->vsync_len - 2;
vdispend = var->yres - 1;
vsyncstart = var->yres + var->lower_margin;
vblankstart = var->yres;
enable_mmio(); // necessary! ... check X ...
- write3X4(CR11,read3X4(CR11) & 0x7F); // unlock cr00 .. cr07
+ write3X4(CR11, read3X4(CR11) & 0x7F); // unlock cr00 .. cr07
- write3CE(GR30,8);
+ write3CE(GR30, 8);
if ((displaytype == DISPLAY_FP) && var->xres < nativex) {
// stretch or center ?
- out8(0x3C2,0xEB);
+ out8(0x3C2, 0xEB);
- write3CE(GR30,read3CE(GR30) | 0x81); // shadow mode on
+ write3CE(GR30, read3CE(GR30) | 0x81); // shadow mode on
if (center) {
- write3CE(GR52,(read3CE(GR52) & 0x7C) | 0x80);
- write3CE(GR53,(read3CE(GR53) & 0x7C) | 0x80);
- }
- else if (stretch) {
- write3CE(GR5D,0);
- write3CE(GR52,(read3CE(GR52) & 0x7C) | 1);
- write3CE(GR53,(read3CE(GR53) & 0x7C) | 1);
+ write3CE(GR52, (read3CE(GR52) & 0x7C) | 0x80);
+ write3CE(GR53, (read3CE(GR53) & 0x7C) | 0x80);
+ } else if (stretch) {
+ write3CE(GR5D, 0);
+ write3CE(GR52, (read3CE(GR52) & 0x7C) | 1);
+ write3CE(GR53, (read3CE(GR53) & 0x7C) | 1);
}
} else {
- out8(0x3C2,0x2B);
- write3CE(GR30,8);
+ out8(0x3C2, 0x2B);
+ write3CE(GR30, 8);
}
//
// Setup CRxx regs
//
- write3X4(CR00,htotal & 0xFF);
- write3X4(CR01,hdispend & 0xFF);
- write3X4(CR02,hblankstart & 0xFF);
- write3X4(CR03,hblankend & 0x1F);
- write3X4(CR04,hsyncstart & 0xFF);
- write3X4(CR05,(hsyncend & 0x1F) | ((hblankend & 0x20)<<2));
- write3X4(CR06,vtotal & 0xFF);
- write3X4(CR07,(vtotal & 0x100) >> 8 |
- (vdispend & 0x100) >> 7 |
- (vsyncstart & 0x100) >> 6 |
- (vblankstart & 0x100) >> 5 |
- 0x10 |
- (vtotal & 0x200) >> 4 |
- (vdispend & 0x200) >> 3 |
- (vsyncstart & 0x200) >> 2);
- write3X4(CR08,0);
- write3X4(CR09,(vblankstart & 0x200) >> 4 | 0x40 | // FIX !!!
- ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0));
- write3X4(CR0A,0); // Init to some reasonable default
- write3X4(CR0B,0); // Init to some reasonable default
- write3X4(CR0C,0); // Offset 0
- write3X4(CR0D,0); // Offset 0
- write3X4(CR0E,0); // Init to some reasonable default
- write3X4(CR0F,0); // Init to some reasonable default
- write3X4(CR10,vsyncstart & 0xFF);
- write3X4(CR11,(vsyncend & 0x0F));
- write3X4(CR12,vdispend & 0xFF);
- write3X4(CR13,((info->var.xres * bpp)/(4*16)) & 0xFF);
- write3X4(CR14,0x40); // double word mode
- write3X4(CR15,vblankstart & 0xFF);
- write3X4(CR16,vblankend & 0xFF);
- write3X4(CR17,0xC3);
- write3X4(CR18,0xFF);
+ write3X4(CR00, htotal & 0xFF);
+ write3X4(CR01, hdispend & 0xFF);
+ write3X4(CR02, hblankstart & 0xFF);
+ write3X4(CR03, hblankend & 0x1F);
+ write3X4(CR04, hsyncstart & 0xFF);
+ write3X4(CR05, (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
+ write3X4(CR06, vtotal & 0xFF);
+ write3X4(CR07, (vtotal & 0x100) >> 8 |
+ (vdispend & 0x100) >> 7 |
+ (vsyncstart & 0x100) >> 6 |
+ (vblankstart & 0x100) >> 5 |
+ 0x10 |
+ (vtotal & 0x200) >> 4 |
+ (vdispend & 0x200) >> 3 | (vsyncstart & 0x200) >> 2);
+ write3X4(CR08, 0);
+ write3X4(CR09, (vblankstart & 0x200) >> 4 | 0x40 | // FIX !!!
+ ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0));
+ write3X4(CR0A, 0); // Init to some reasonable default
+ write3X4(CR0B, 0); // Init to some reasonable default
+ write3X4(CR0C, 0); // Offset 0
+ write3X4(CR0D, 0); // Offset 0
+ write3X4(CR0E, 0); // Init to some reasonable default
+ write3X4(CR0F, 0); // Init to some reasonable default
+ write3X4(CR10, vsyncstart & 0xFF);
+ write3X4(CR11, (vsyncend & 0x0F));
+ write3X4(CR12, vdispend & 0xFF);
+ write3X4(CR13, ((info->var.xres_virtual * bpp) / (4 * 16)) & 0xFF);
+ write3X4(CR14, 0x40); // double word mode
+ write3X4(CR15, vblankstart & 0xFF);
+ write3X4(CR16, vblankend & 0xFF);
+ write3X4(CR17, 0xE3);
+ write3X4(CR18, 0xFF);
// CR19: needed for interlaced modes ... ignore it for now
- write3X4(CR1A,0x07); // Arbitration Control Counter 1
- write3X4(CR1B,0x07); // Arbitration Control Counter 2
- write3X4(CR1C,0x07); // Arbitration Control Counter 3
- write3X4(CR1D,0x00); // Don't know, doesn't hurt ;-)
- write3X4(CR1E,(info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80);
+ write3X4(CR1A, 0x07); // Arbitration Control Counter 1
+ write3X4(CR1B, 0x07); // Arbitration Control Counter 2
+ write3X4(CR1C, 0x07); // Arbitration Control Counter 3
+ write3X4(CR1D, 0x00); // Don't know, doesn't hurt ; -)
+ write3X4(CR1E, (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80);
// CR1F: do not set, contains BIOS info about memsize
- write3X4(CR20,0x20); // enabe wr buf, disable 16bit planar mode
- write3X4(CR21,0x20); // enable linear memory access
+ write3X4(CR20, 0x20); // enabe wr buf, disable 16bit planar mode
+ write3X4(CR21, 0x20); // enable linear memory access
// CR22: RO cpu latch readback
// CR23: ???
// CR24: RO AR flag state
// CR25: RAMDAC rw timing, pclk buffer tristate control ????
// CR26: ???
- write3X4(CR27,(vdispend & 0x400) >> 6 |
- (vsyncstart & 0x400) >> 5 |
- (vblankstart & 0x400) >> 4 |
- (vtotal & 0x400) >> 3 |
- 0x8);
+ write3X4(CR27, (vdispend & 0x400) >> 6 |
+ (vsyncstart & 0x400) >> 5 |
+ (vblankstart & 0x400) >> 4 |
+ (vtotal & 0x400) >> 3 |
+ 0x8);
// CR28: ???
- write3X4(CR29,(read3X4(CR29) & 0xCF) |
- ((((info->var.xres * bpp) / (4*16)) & 0x300) >>4));
- write3X4(CR2A,read3X4(CR2A) | 0x40);
- write3X4(CR2B,(htotal & 0x100) >> 8 |
- (hdispend & 0x100) >> 7 |
- // (0x00 & 0x100) >> 6 | hinterlace para bit 8 ???
- (hsyncstart & 0x100) >> 5 |
- (hblankstart & 0x100) >> 4);
+ write3X4(CR29, (read3X4(CR29) & 0xCF) | ((((info->var.xres_virtual *
+ bpp) / (4 * 16)) & 0x300) >> 4));
+ write3X4(CR2A, read3X4(CR2A) | 0x40);
+ write3X4(CR2B, (htotal & 0x100) >> 8 |
+ (hdispend & 0x100) >> 7 |
+ // (0x00 & 0x100) >> 6 | hinterlace para bit 8 ???
+ (hsyncstart & 0x100) >> 5 |
+ (hblankstart & 0x100) >> 4);
// CR2C: ???
// CR2D: initialized in cyblafb_setup_GE()
- write3X4(CR2F,0x92); // conservative, better signal quality
+ write3X4(CR2F, 0x92); // conservative, better signal quality
// CR30: reserved
// CR31: reserved
// CR32: reserved
// CR35: disabled in CR36
// CR36: initialized in cyblafb_setup_GE
// CR37: i2c, ignore for now
- write3X4(CR38,(bpp == 8) ? 0x00 : //
- (bpp == 16) ? 0x05 : // highcolor
- (bpp == 24) ? 0x29 : // packed 24bit truecolor
- (bpp == 32) ? 0x09 : 0); // truecolor, 16 bit pixelbus
- write3X4(CR39,0x01 | // MMIO enable
- (pcirb ? 0x02 : 0) | // pci read burst enable
- (pciwb ? 0x04 : 0)); // pci write burst enable
- write3X4(CR55,0x1F | // pci clocks * 2 for STOP# during 1st data phase
- (pcirr ? 0x40 : 0) | // pci read retry enable
- (pciwr ? 0x80 : 0)); // pci write retry enable
- write3X4(CR56,preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01)|2 : 0);
- write3X4(CR57,preendfetch >> 8 < 2 ? preendfetch & 0xff : 0);
- write3X4(CR58,0x82); // Bios does this .... don't know more
+ write3X4(CR38, (bpp == 8) ? 0x00 : //
+ (bpp == 16) ? 0x05 : // highcolor
+ (bpp == 24) ? 0x29 : // packed 24bit truecolor
+ (bpp == 32) ? 0x09 : 0); // truecolor, 16 bit pixelbus
+ write3X4(CR39, 0x01 | // MMIO enable
+ (pcirb ? 0x02 : 0) | // pci read burst enable
+ (pciwb ? 0x04 : 0)); // pci write burst enable
+ write3X4(CR55, 0x1F | // pci clocks * 2 for STOP# during 1st data phase
+ (pcirr ? 0x40 : 0) | // pci read retry enable
+ (pciwr ? 0x80 : 0)); // pci write retry enable
+ write3X4(CR56, preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01) | 2
+ : 0);
+ write3X4(CR57, preendfetch >> 8 < 2 ? preendfetch & 0xff : 0);
+ write3X4(CR58, 0x82); // Bios does this .... don't know more
//
// Setup SRxx regs
//
- write3C4(SR00,3);
- write3C4(SR01,1); //set char clock 8 dots wide
- write3C4(SR02,0x0F); //enable 4 maps needed in chain4 mode
- write3C4(SR03,0); //no character map select
- write3C4(SR04,0x0E); //memory mode: ext mem, even, chain4
+ write3C4(SR00, 3);
+ write3C4(SR01, 1); //set char clock 8 dots wide
+ write3C4(SR02, 0x0F); //enable 4 maps needed in chain4 mode
+ write3C4(SR03, 0); //no character map select
+ write3C4(SR04, 0x0E); //memory mode: ext mem, even, chain4
- out8(0x3C4,0x0b);
+ out8(0x3C4, 0x0b);
in8(0x3C5); // Set NEW mode
- write3C4(SR0D,0x00); // test ... check
+ write3C4(SR0D, 0x00); // test ... check
- set_vclk(par,(bpp==32 ? 200000000 : 100000000)/
- info->var.pixclock); //SR18,SR19
+ set_vclk(par, (bpp == 32 ? 200000000 : 100000000)
+ / info->var.pixclock); //SR18, SR19
//
// Setup GRxx regs
//
- write3CE(GR00,0x00); // test ... check
- write3CE(GR01,0x00); // test ... check
- write3CE(GR02,0x00); // test ... check
- write3CE(GR03,0x00); // test ... check
- write3CE(GR04,0x00); // test ... check
- write3CE(GR05,0x40); // no CGA compat,allow 256 col
- write3CE(GR06,0x05); // graphics mode
- write3CE(GR07,0x0F); // planes?
- write3CE(GR08,0xFF); // test ... check
- write3CE(GR0F,(bpp==32)?0x1A:0x12); // div vclk by 2 if 32bpp, chain4
- write3CE(GR20,0xC0); // test ... check
- write3CE(GR2F,0xA0); // PCLK = VCLK, no skew,
+ write3CE(GR00, 0x00); // test ... check
+ write3CE(GR01, 0x00); // test ... check
+ write3CE(GR02, 0x00); // test ... check
+ write3CE(GR03, 0x00); // test ... check
+ write3CE(GR04, 0x00); // test ... check
+ write3CE(GR05, 0x40); // no CGA compat, allow 256 col
+ write3CE(GR06, 0x05); // graphics mode
+ write3CE(GR07, 0x0F); // planes?
+ write3CE(GR08, 0xFF); // test ... check
+ write3CE(GR0F, (bpp == 32) ? 0x1A : 0x12); // vclk / 2 if 32bpp, chain4
+ write3CE(GR20, 0xC0); // test ... check
+ write3CE(GR2F, 0xA0); // PCLK = VCLK, no skew,
//
// Setup ARxx regs
//
- for(i = 0;i < 0x10;i++) // set AR00 .. AR0f
- write3C0(i,i);
- write3C0(AR10,0x41); // graphics mode and support 256 color modes
- write3C0(AR12,0x0F); // planes
- write3C0(AR13,0); // horizontal pel panning
+ for (i = 0; i < 0x10; i++) // set AR00 .. AR0f
+ write3C0(i, i);
+ write3C0(AR10, 0x41); // graphics mode and support 256 color modes
+ write3C0(AR12, 0x0F); // planes
+ write3C0(AR13, 0); // horizontal pel panning
in8(0x3DA); // reset internal flag to 3c0 index
- out8(0x3C0,0x20); // enable attr
+ out8(0x3C0, 0x20); // enable attr
//
// Setup hidden RAMDAC command register
//
- in8(0x3C8); // these reads are
- in8(0x3C6); // necessary to
- in8(0x3C6); // unmask the RAMDAC
- in8(0x3C6); // command reg, otherwise
- in8(0x3C6); // we would write the pixelmask reg!
- out8(0x3C6,(bpp == 8) ? 0x00 : // 256 colors
- (bpp == 15) ? 0x10 : //
- (bpp == 16) ? 0x30 : // hicolor
- (bpp == 24) ? 0xD0 : // truecolor
- (bpp == 32) ? 0xD0 : 0); // truecolor
+ in8(0x3C8); // these reads are
+ in8(0x3C6); // necessary to
+ in8(0x3C6); // unmask the RAMDAC
+ in8(0x3C6); // command reg, otherwise
+ in8(0x3C6); // we would write the pixelmask reg!
+ out8(0x3C6, (bpp == 8) ? 0x00 : // 256 colors
+ (bpp == 15) ? 0x10 : //
+ (bpp == 16) ? 0x30 : // hicolor
+ (bpp == 24) ? 0xD0 : // truecolor
+ (bpp == 32) ? 0xD0 : 0); // truecolor
in8(0x3C8);
//
// GR31 is not mentioned in the datasheet
//
if (displaytype == DISPLAY_FP)
- write3CE(GR31,(read3CE(GR31) & 0x8F) |
+ write3CE(GR31, (read3CE(GR31) & 0x8F) |
((info->var.yres > 1024) ? 0x50 :
- (info->var.yres > 768) ? 0x30 :
- (info->var.yres > 600) ? 0x20 :
- (info->var.yres > 480) ? 0x10 : 0));
+ (info->var.yres > 768) ? 0x30 :
+ (info->var.yres > 600) ? 0x20 :
+ (info->var.yres > 480) ? 0x10 : 0));
info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR
: FB_VISUAL_TRUECOLOR;
- info->fix.line_length = info->var.xres * (bpp >> 3);
- info->cmap.len = (bpp == 8) ? 256: 16;
+ info->fix.line_length = info->var.xres_virtual * (bpp >> 3);
+ info->cmap.len = (bpp == 8) ? 256 : 16;
//
// init acceleration engine
//
- cyblafb_setup_GE(info->var.xres,info->var.bits_per_pixel);
+ cyblafb_setup_GE(info->var.xres_virtual, info->var.bits_per_pixel);
+
+ //
+ // Set/clear flags to allow proper scroll mode selection.
+ //
+ if (var->xres == var->xres_virtual)
+ info->flags &= ~FBINFO_HWACCEL_XPAN;
+ else
+ info->flags |= FBINFO_HWACCEL_XPAN;
+
+ if (var->yres == var->yres_virtual)
+ info->flags &= ~FBINFO_HWACCEL_YPAN;
+ else
+ info->flags |= FBINFO_HWACCEL_YPAN;
+
+ if (info->fix.smem_len !=
+ var->xres_virtual * var->yres_virtual * bpp / 8)
+ info->flags &= ~FBINFO_HWACCEL_YWRAP;
+ else
+ info->flags |= FBINFO_HWACCEL_YWRAP;
regdump(par);
{
int bpp = info->var.bits_per_pixel;
+ KD_GRAPHICS_RETURN(0);
+
if (regno >= info->cmap.len)
return 1;
if (bpp == 8) {
- out8(0x3C6,0xFF);
- out8(0x3C8,regno);
- out8(0x3C9,red>>10);
- out8(0x3C9,green>>10);
- out8(0x3C9,blue>>10);
-
- } else if (bpp == 16) // RGB 565
- ((u32*)info->pseudo_palette)[regno] =
- (red & 0xF800) |
- ((green & 0xFC00) >> 5) |
- ((blue & 0xF800) >> 11);
- else if (bpp == 32) // ARGB 8888
- ((u32*)info->pseudo_palette)[regno] =
- ((transp & 0xFF00) <<16) |
- ((red & 0xFF00) << 8) |
- ((green & 0xFF00)) |
- ((blue & 0xFF00)>>8);
+ out8(0x3C6, 0xFF);
+ out8(0x3C8, regno);
+ out8(0x3C9, red >> 10);
+ out8(0x3C9, green >> 10);
+ out8(0x3C9, blue >> 10);
+
+ } else if (bpp == 16) // RGB 565
+ ((u32 *) info->pseudo_palette)[regno] =
+ (red & 0xF800) |
+ ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
+ else if (bpp == 32) // ARGB 8888
+ ((u32 *) info->pseudo_palette)[regno] =
+ ((transp & 0xFF00) << 16) |
+ ((red & 0xFF00) << 8) |
+ ((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
return 0;
}
static int cyblafb_blank(int blank_mode, struct fb_info *info)
{
- unsigned char PMCont,DPMSCont;
+ unsigned char PMCont, DPMSCont;
+
+ KD_GRAPHICS_RETURN(0);
if (displaytype == DISPLAY_FP)
return 0;
- out8(0x83C8,0x04); // DPMS Control
+ out8(0x83C8, 0x04); // DPMS Control
PMCont = in8(0x83C6) & 0xFC;
DPMSCont = read3CE(GR23) & 0xFC;
- switch (blank_mode)
- {
- case FB_BLANK_UNBLANK: // Screen: On, HSync: On, VSync: On
- case FB_BLANK_NORMAL: // Screen: Off, HSync: On, VSync: On
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK: // Screen: On, HSync: On, VSync: On
+ case FB_BLANK_NORMAL: // Screen: Off, HSync: On, VSync: On
PMCont |= 0x03;
DPMSCont |= 0x00;
break;
- case FB_BLANK_HSYNC_SUSPEND: // Screen: Off, HSync: Off, VSync: On
+ case FB_BLANK_HSYNC_SUSPEND: // Screen: Off, HSync: Off, VSync: On
PMCont |= 0x02;
DPMSCont |= 0x01;
break;
- case FB_BLANK_VSYNC_SUSPEND: // Screen: Off, HSync: On, VSync: Off
+ case FB_BLANK_VSYNC_SUSPEND: // Screen: Off, HSync: On, VSync: Off
PMCont |= 0x02;
DPMSCont |= 0x02;
break;
- case FB_BLANK_POWERDOWN: // Screen: Off, HSync: Off, VSync: Off
+ case FB_BLANK_POWERDOWN: // Screen: Off, HSync: Off, VSync: Off
PMCont |= 0x00;
DPMSCont |= 0x03;
break;
}
- write3CE(GR23,DPMSCont);
- out8(0x83C8,4);
- out8(0x83C6,PMCont);
+ write3CE(GR23, DPMSCont);
+ out8(0x83C8, 4);
+ out8(0x83C6, PMCont);
//
// let fbcon do a softblank for us
//
}
static struct fb_ops cyblafb_ops __devinitdata = {
- .owner = THIS_MODULE,
+ .owner = THIS_MODULE,
.fb_setcolreg = cyblafb_setcolreg,
.fb_pan_display = cyblafb_pan_display,
.fb_blank = cyblafb_blank,
.fb_check_var = cyblafb_check_var,
.fb_set_par = cyblafb_set_par,
.fb_fillrect = cyblafb_fillrect,
- .fb_copyarea= cyblafb_copyarea,
+ .fb_copyarea = cyblafb_copyarea,
.fb_imageblit = cyblafb_imageblit,
- .fb_cursor = soft_cursor,
+ .fb_sync = cyblafb_sync,
+ .fb_restore_state = cyblafb_restore_state,
+ .fb_save_state = cyblafb_save_state,
};
//==========================================================================
static int __devinit getstartupmode(struct fb_info *info)
{
- u32 htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,
- vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend,
- cr00,cr01,cr02,cr03,cr04,cr05,cr2b,
- cr06,cr07,cr09,cr10,cr11,cr12,cr15,cr16,cr27,
- cr38,
- sr0d,sr18,sr19,
- gr0f,
- fi,pxclkdiv,vclkdiv,tmp,i;
+ u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend,
+ vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend,
+ cr00, cr01, cr02, cr03, cr04, cr05, cr2b,
+ cr06, cr07, cr09, cr10, cr11, cr12, cr15, cr16, cr27,
+ cr38, sr0d, sr18, sr19, gr0f, fi, pxclkdiv, vclkdiv, tmp, i;
struct modus {
- int xres; int yres; int vyres; int bpp; int pxclk;
- int left_margin; int right_margin; int upper_margin;
- int lower_margin; int hsync_len; int vsync_len;
- } modedb[5] = {
- { 0, 0, 8000, 0, 0, 0, 0, 0, 0, 0, 0},
- { 640, 480, 3756, 0, 0, -40, 24, 17, 0, 216, 3},
- { 800, 600, 3221, 0, 0, 96, 24, 14, 0, 136, 11},
- {1024, 768, 2815, 0, 0, 144, 24, 29, 0, 120, 3},
- {1280, 1024, 2662, 0, 0, 232, 16, 39, 0, 160, 3}
+ int xres; int vxres; int yres; int vyres;
+ int bpp; int pxclk;
+ int left_margin; int right_margin;
+ int upper_margin; int lower_margin;
+ int hsync_len; int vsync_len;
+ } modedb[5] = {
+ {
+ 0, 2048, 0, 4096, 0, 0, 0, 0, 0, 0, 0, 0}, {
+ 640, 2048, 480, 4096, 0, 0, -40, 24, 17, 0, 216, 3}, {
+ 800, 2048, 600, 4096, 0, 0, 96, 24, 14, 0, 136, 11}, {
+ 1024, 2048, 768, 4096, 0, 0, 144, 24, 29, 0, 120, 3}, {
+ 1280, 2048, 1024, 4096, 0, 0, 232, 16, 39, 0, 160, 3}
};
- outb(0x00,0x3d4); cr00=inb(0x3d5); outb(0x01,0x3d4); cr01=inb(0x3d5);
- outb(0x02,0x3d4); cr02=inb(0x3d5); outb(0x03,0x3d4); cr03=inb(0x3d5);
- outb(0x04,0x3d4); cr04=inb(0x3d5); outb(0x05,0x3d4); cr05=inb(0x3d5);
- outb(0x06,0x3d4); cr06=inb(0x3d5); outb(0x07,0x3d4); cr07=inb(0x3d5);
- outb(0x09,0x3d4); cr09=inb(0x3d5); outb(0x10,0x3d4); cr10=inb(0x3d5);
- outb(0x11,0x3d4); cr11=inb(0x3d5); outb(0x12,0x3d4); cr12=inb(0x3d5);
- outb(0x15,0x3d4); cr15=inb(0x3d5); outb(0x16,0x3d4); cr16=inb(0x3d5);
- outb(0x27,0x3d4); cr27=inb(0x3d5); outb(0x2b,0x3d4); cr2b=inb(0x3d5);
- outb(0x38,0x3d4); cr38=inb(0x3d5); outb(0x0b,0x3c4); inb(0x3c5);
- outb(0x0d,0x3c4); sr0d=inb(0x3c5); outb(0x18,0x3c4); sr18=inb(0x3c5);
- outb(0x19,0x3c4); sr19=inb(0x3c5); outb(0x0f,0x3ce); gr0f=inb(0x3cf);
-
- htotal = cr00 | (cr2b & 0x01) << 8;
- hdispend = cr01 | (cr2b & 0x02) << 7;
+ outb(0x00, 0x3d4); cr00 = inb(0x3d5);
+ outb(0x01, 0x3d4); cr01 = inb(0x3d5);
+ outb(0x02, 0x3d4); cr02 = inb(0x3d5);
+ outb(0x03, 0x3d4); cr03 = inb(0x3d5);
+ outb(0x04, 0x3d4); cr04 = inb(0x3d5);
+ outb(0x05, 0x3d4); cr05 = inb(0x3d5);
+ outb(0x06, 0x3d4); cr06 = inb(0x3d5);
+ outb(0x07, 0x3d4); cr07 = inb(0x3d5);
+ outb(0x09, 0x3d4); cr09 = inb(0x3d5);
+ outb(0x10, 0x3d4); cr10 = inb(0x3d5);
+ outb(0x11, 0x3d4); cr11 = inb(0x3d5);
+ outb(0x12, 0x3d4); cr12 = inb(0x3d5);
+ outb(0x15, 0x3d4); cr15 = inb(0x3d5);
+ outb(0x16, 0x3d4); cr16 = inb(0x3d5);
+ outb(0x27, 0x3d4); cr27 = inb(0x3d5);
+ outb(0x2b, 0x3d4); cr2b = inb(0x3d5);
+ outb(0x38, 0x3d4); cr38 = inb(0x3d5);
+
+ outb(0x0b, 0x3c4);
+ inb(0x3c5);
+
+ outb(0x0d, 0x3c4); sr0d = inb(0x3c5);
+ outb(0x18, 0x3c4); sr18 = inb(0x3c5);
+ outb(0x19, 0x3c4); sr19 = inb(0x3c5);
+ outb(0x0f, 0x3ce); gr0f = inb(0x3cf);
+
+ htotal = cr00 | (cr2b & 0x01) << 8;
+ hdispend = cr01 | (cr2b & 0x02) << 7;
hblankstart = cr02 | (cr2b & 0x10) << 4;
- hblankend = (cr03 & 0x1f) | (cr05 & 0x80) >> 2;
- hsyncstart = cr04 | (cr2b & 0x08) << 5;
- hsyncend = cr05 & 0x1f;
+ hblankend = (cr03 & 0x1f) | (cr05 & 0x80) >> 2;
+ hsyncstart = cr04 | (cr2b & 0x08) << 5;
+ hsyncend = cr05 & 0x1f;
modedb[0].xres = hblankstart * 8;
modedb[0].hsync_len = hsyncend * 8;
modedb[0].right_margin = hsyncstart * 8 - modedb[0].xres;
modedb[0].left_margin = (htotal + 5) * 8 - modedb[0].xres -
- modedb[0].right_margin - modedb[0].hsync_len;
-
- vtotal = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4
- | (cr27 & 0x80) << 3;
- vdispend = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3
- | (cr27 & 0x10) << 6;
- vsyncstart = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2
- | (cr27 & 0x20) << 5;
- vsyncend = cr11 & 0x0f;
+ modedb[0].right_margin - modedb[0].hsync_len;
+
+ vtotal = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4
+ | (cr27 & 0x80) << 3;
+ vdispend = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3
+ | (cr27 & 0x10) << 6;
+ vsyncstart = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2
+ | (cr27 & 0x20) << 5;
+ vsyncend = cr11 & 0x0f;
vblankstart = cr15 | (cr07 & 0x08) << 5 | (cr09 & 0x20) << 4
- | (cr27 & 0x40) << 4;
- vblankend = cr16;
+ | (cr27 & 0x40) << 4;
+ vblankend = cr16;
- modedb[0].yres = vdispend + 1;
- modedb[0].vsync_len = vsyncend;
+ modedb[0].yres = vdispend + 1;
+ modedb[0].vsync_len = vsyncend;
modedb[0].lower_margin = vsyncstart - modedb[0].yres;
modedb[0].upper_margin = vtotal - modedb[0].yres -
- modedb[0].lower_margin - modedb[0].vsync_len + 2;
+ modedb[0].lower_margin - modedb[0].vsync_len + 2;
tmp = cr38 & 0x3c;
modedb[0].bpp = tmp == 0 ? 8 : tmp == 4 ? 16 : tmp == 28 ? 24 :
- tmp == 8 ? 32 : 8;
+ tmp == 8 ? 32 : 8;
- fi = ((5864727*(sr18+8))/(((sr19&0x3f)+2)*(1<<((sr19&0xc0)>>6))))>>12;
+ fi = ((5864727 * (sr18 + 8)) /
+ (((sr19 & 0x3f) + 2) * (1 << ((sr19 & 0xc0) >> 6)))) >> 12;
pxclkdiv = ((gr0f & 0x08) >> 3 | (gr0f & 0x40) >> 5) + 1;
tmp = sr0d & 0x06;
vclkdiv = tmp == 0 ? 2 : tmp == 2 ? 4 : tmp == 4 ? 8 : 3; // * 2 !
if (verbosity > 0)
output("detected startup mode: "
"fbset -g %d %d %d ??? %d -t %d %d %d %d %d %d %d\n",
- modedb[0].xres,modedb[0].yres,modedb[0].xres,
- modedb[0].bpp,modedb[0].pxclk,modedb[0].left_margin,
- modedb[0].right_margin,modedb[0].upper_margin,
- modedb[0].lower_margin,modedb[0].hsync_len,
+ modedb[0].xres, modedb[0].yres, modedb[0].xres,
+ modedb[0].bpp, modedb[0].pxclk, modedb[0].left_margin,
+ modedb[0].right_margin, modedb[0].upper_margin,
+ modedb[0].lower_margin, modedb[0].hsync_len,
modedb[0].vsync_len);
//
// do not want to do it in another way!
//
- tryagain:
+ tryagain:
i = (mode == NULL) ? 0 :
- !strncmp(mode,"640x480",7) ? 1 :
- !strncmp(mode,"800x600",7) ? 2 :
- !strncmp(mode,"1024x768",8) ? 3 :
- !strncmp(mode,"1280x1024",9) ? 4 : 0;
+ !strncmp(mode, "640x480", 7) ? 1 :
+ !strncmp(mode, "800x600", 7) ? 2 :
+ !strncmp(mode, "1024x768", 8) ? 3 :
+ !strncmp(mode, "1280x1024", 9) ? 4 : 0;
ref = (ref < 50) ? 50 : (ref > 85) ? 85 : ref;
- if(i==0) {
+ if (i == 0) {
info->var.pixclock = modedb[i].pxclk;
info->var.bits_per_pixel = modedb[i].bpp;
} else {
info->var.pixclock = (100000000 /
- ((modedb[i].left_margin + modedb[i].xres +
- modedb[i].right_margin + modedb[i].hsync_len
- ) * (
- modedb[i].upper_margin + modedb[i].yres +
- modedb[i].lower_margin + modedb[i].vsync_len
- ) *
- ref / 10000
- ));
+ ((modedb[i].left_margin +
+ modedb[i].xres +
+ modedb[i].right_margin +
+ modedb[i].hsync_len) *
+ (modedb[i].upper_margin +
+ modedb[i].yres +
+ modedb[i].lower_margin +
+ modedb[i].vsync_len) * ref / 10000));
info->var.bits_per_pixel = bpp;
}
info->var.left_margin = modedb[i].left_margin;
info->var.right_margin = modedb[i].right_margin;
info->var.xres = modedb[i].xres;
- info->var.xres_virtual = modedb[i].xres;
+ if (!(modedb[i].yres == 1280 && modedb[i].bpp == 32))
+ info->var.xres_virtual = modedb[i].vxres;
+ else
+ info->var.xres_virtual = modedb[i].xres;
info->var.xoffset = 0;
info->var.hsync_len = modedb[i].hsync_len;
info->var.upper_margin = modedb[i].upper_margin;
info->var.sync = 0;
info->var.vmode = FB_VMODE_NONINTERLACED;
- if(cyblafb_check_var(&info->var,info)) {
- // 640x480-8@75 should really never fail. One case would
+ if (cyblafb_check_var(&info->var, info)) {
+ // 640x480 - 8@75 should really never fail. One case would
// be fp == 1 and nativex < 640 ... give up then
- if(i==1 && bpp == 8 && ref == 75){
+ if (i == 1 && bpp == 8 && ref == 75) {
output("Can't find a valid mode :-(\n");
return -EINVAL;
}
// Our detected mode is unlikely to fail. If it does,
- // try 640x480-8@75 ...
- if(i==0) {
- mode="640x480";
- bpp=8;
- ref=75;
+ // try 640x480 - 8@75 ...
+ if (i == 0) {
+ mode = "640x480";
+ bpp = 8;
+ ref = 75;
output("Detected mode failed check_var! "
- "Trying 640x480-8@75\n");
+ "Trying 640x480 - 8@75\n");
goto tryagain;
}
// A specified video mode failed for some reason.
// Try the startup mode first
output("Specified mode '%s' failed check! "
- "Falling back to startup mode.\n",mode);
- mode=NULL;
+ "Falling back to startup mode.\n", mode);
+ mode = NULL;
goto tryagain;
}
return 0;
-
}
//========================================================
else {
tmp = read3X4(CR1F) & 0x0F;
switch (tmp) {
- case 0x03: k = 1 * Mb; break;
- case 0x07: k = 2 * Mb; break;
- case 0x0F: k = 4 * Mb; break;
- case 0x04: k = 8 * Mb; break;
- default:
- k = 1 * Mb;
- output("Unknown memory size code %x in CR1F."
- " We default to 1 Mb for now, please"
- " do provide a memsize parameter!\n",
- tmp);
+ case 0x03:
+ k = 1 * 1024 * 1024;
+ break;
+ case 0x07:
+ k = 2 * 1024 * 1024;
+ break;
+ case 0x0F:
+ k = 4 * 1024 * 1024;
+ break;
+ case 0x04:
+ k = 8 * 1024 * 1024;
+ break;
+ default:
+ k = 1 * 1024 * 1024;
+ output("Unknown memory size code %x in CR1F."
+ " We default to 1 Mb for now, please"
+ " do provide a memsize parameter!\n", tmp);
}
}
if (verbosity > 0)
- output("framebuffer size = %d Kb\n",k/Kb);
+ output("framebuffer size = %d Kb\n", k / Kb);
return k;
}
return DISPLAY_FP;
if (crt)
return DISPLAY_CRT;
- return (read3CE(GR33) & 0x10)?DISPLAY_FP:DISPLAY_CRT;
+ return (read3CE(GR33) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
}
//=====================================
static int __devinit get_nativex(void)
{
- int x,y,tmp;
+ int x, y, tmp;
if (nativex)
return nativex;
tmp = (read3CE(GR52) >> 4) & 3;
switch (tmp) {
- case 0: x = 1280; y = 1024; break;
- case 2: x = 1024; y = 768; break;
- case 3: x = 800; y = 600; break;
- case 4: x = 1400; y = 1050; break;
- case 1:
- default: x = 640; y = 480; break;
+ case 0: x = 1280; y = 1024;
+ break;
+ case 2: x = 1024; y = 768;
+ break;
+ case 3: x = 800; y = 600;
+ break;
+ case 4: x = 1400; y = 1050;
+ break;
+ case 1:
+ default:
+ x = 640; y = 480;
+ break;
}
if (verbosity > 0)
- output("%dx%d flat panel found\n",x,y);
+ output("%dx%d flat panel found\n", x, y);
return x;
}
-static int __devinit cybla_pci_probe(struct pci_dev * dev,
- const struct pci_device_id * id)
+static int __devinit cybla_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct fb_info *info;
struct cyblafb_par *par;
- info = framebuffer_alloc(sizeof(struct cyblafb_par),&dev->dev);
-
+ info = framebuffer_alloc(sizeof(struct cyblafb_par), &dev->dev);
if (!info)
- goto errout_alloc;
+ goto errout_alloc_info;
+
+ info->pixmap.addr = kzalloc(CYBLAFB_PIXMAPSIZE, GFP_KERNEL);
+ if (!info->pixmap.addr) {
+ output("allocation of pixmap buffer failed!\n");
+ goto errout_alloc_pixmap;
+ }
+ info->pixmap.size = CYBLAFB_PIXMAPSIZE - 4;
+ info->pixmap.buf_align = 4;
+ info->pixmap.access_align = 32;
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+ info->pixmap.scan_align = 4;
par = info->par;
par->ops = cyblafb_ops;
output("could not enable device!\n");
goto errout_enable;
}
-
// might already be requested by vga console or vesafb,
// so we do care about success
- request_region(0x3c0,32,"cyblafb");
+ if (!request_region(0x3c0, 0x20, "cyblafb")) {
+ output("region 0x3c0/0x20 already reserved\n");
+ vesafb |= 1;
+ }
//
// Graphics Engine Registers
//
- request_region(GEBase,0x100,"cyblafb");
+ if (!request_region(GEBase, 0x100, "cyblafb")) {
+ output("region %#x/0x100 already reserved\n", GEBase);
+ vesafb |= 2;
+ }
regdump(par);
enable_mmio();
// setup MMIO region
- info->fix.mmio_start = pci_resource_start(dev,1);
+ info->fix.mmio_start = pci_resource_start(dev, 1);
info->fix.mmio_len = 0x20000;
if (!request_mem_region(info->fix.mmio_start,
- info->fix.mmio_len,"cyblafb")) {
+ info->fix.mmio_len, "cyblafb")) {
output("request_mem_region failed for mmio region!\n");
goto errout_mmio_reqmem;
}
output("ioremap failed for mmio region\n");
goto errout_mmio_remap;
}
-
// setup framebuffer memory ... might already be requested
// by vesafb. Not to fail in case of an unsuccessful request
- // is useful for the development cycle
- info->fix.smem_start = pci_resource_start(dev,0);
+ // is useful if both are loaded.
+ info->fix.smem_start = pci_resource_start(dev, 0);
info->fix.smem_len = get_memsize();
if (!request_mem_region(info->fix.smem_start,
- info->fix.smem_len,"cyblafb")) {
- output("request_mem_region failed for smem region!\n");
- if (!vesafb)
- goto errout_smem_req;
+ info->fix.smem_len, "cyblafb")) {
+ output("region %#lx/%#x already reserved\n",
+ info->fix.smem_start, info->fix.smem_len);
+ vesafb |= 4;
}
info->screen_base = ioremap_nocache(info->fix.smem_start,
displaytype = get_displaytype();
- if(displaytype == DISPLAY_FP)
+ if (displaytype == DISPLAY_FP)
nativex = get_nativex();
- //
- // FBINFO_HWACCEL_YWRAP .... does not work (could be made to work?)
- // FBINFO_PARTIAL_PAN_OK .... is not ok
- // FBINFO_READS_FAST .... is necessary for optimal scrolling
- //
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN
- | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT
- | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_READS_FAST;
+ info->flags = FBINFO_DEFAULT
+ | FBINFO_HWACCEL_COPYAREA
+ | FBINFO_HWACCEL_FILLRECT
+ | FBINFO_HWACCEL_IMAGEBLIT
+ | FBINFO_READS_FAST
+// | FBINFO_PARTIAL_PAN_OK
+ | FBINFO_MISC_ALWAYS_SETPAR;
info->pseudo_palette = par->pseudo_pal;
- if(getstartupmode(info))
+ if (getstartupmode(info))
goto errout_findmode;
- fb_alloc_cmap(&info->cmap,256,0);
+ fb_alloc_cmap(&info->cmap, 256, 0);
if (register_framebuffer(info)) {
output("Could not register CyBla framebuffer\n");
goto errout_register;
}
- pci_set_drvdata(dev,info);
+ pci_set_drvdata(dev, info);
//
// normal exit and error paths
return 0;
- errout_register:
- errout_findmode:
+ errout_register:
+ errout_findmode:
iounmap(info->screen_base);
- errout_smem_remap:
- release_mem_region(info->fix.smem_start,
- info->fix.smem_len);
- errout_smem_req:
+ errout_smem_remap:
+ if (!(vesafb & 4))
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
iounmap(io_virt);
- errout_mmio_remap:
- release_mem_region(info->fix.mmio_start,
- info->fix.mmio_len);
- errout_mmio_reqmem:
-// release_region(0x3c0,32);
- errout_enable:
+ errout_mmio_remap:
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+ errout_mmio_reqmem:
+ if (!(vesafb & 1))
+ release_region(0x3c0, 32);
+ errout_enable:
+ kfree(info->pixmap.addr);
+ errout_alloc_pixmap:
framebuffer_release(info);
- errout_alloc:
- output("CyblaFB version %s aborting init.\n",VERSION);
+ errout_alloc_info:
+ output("CyblaFB version %s aborting init.\n", VERSION);
return -ENODEV;
}
unregister_framebuffer(info);
iounmap(io_virt);
iounmap(info->screen_base);
- release_mem_region(info->fix.smem_start,info->fix.smem_len);
- release_mem_region(info->fix.mmio_start,info->fix.mmio_len);
+ if (!(vesafb & 4))
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
fb_dealloc_cmap(&info->cmap);
+ if (!(vesafb & 2))
+ release_region(GEBase, 0x100);
+ if (!(vesafb & 1))
+ release_region(0x3c0, 32);
+ kfree(info->pixmap.addr);
framebuffer_release(info);
- output("CyblaFB version %s normal exit.\n",VERSION);
+ output("CyblaFB version %s normal exit.\n", VERSION);
}
//
// List of boards that we are trying to support
//
static struct pci_device_id cybla_devices[] = {
- {PCI_VENDOR_ID_TRIDENT,CYBERBLADEi1,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
+ {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0,}
};
-MODULE_DEVICE_TABLE(pci,cybla_devices);
+MODULE_DEVICE_TABLE(pci, cybla_devices);
static struct pci_driver cyblafb_pci_driver = {
- .name = "cyblafb",
- .id_table = cybla_devices,
- .probe = cybla_pci_probe,
- .remove = __devexit_p(cybla_pci_remove)
+ .name = "cyblafb",
+ .id_table = cybla_devices,
+ .probe = cybla_pci_probe,
+ .remove = __devexit_p(cybla_pci_remove)
};
//=============================================================
//
// kernel command line example:
//
-// video=cyblafb:1280x1024,bpp=16,ref=50 ...
+// video=cyblafb:1280x1024, bpp=16, ref=50 ...
//
// modprobe command line example:
//
char *options = NULL;
char *opt;
- if (fb_get_options("cyblafb",&options))
+ if (fb_get_options("cyblafb", &options))
return -ENODEV;
if (options && *options)
- while((opt = strsep(&options,",")) != NULL ) {
- if (!*opt) continue;
- else if (!strncmp(opt,"bpp=",4))
- bpp = simple_strtoul(opt+4,NULL,0);
- else if (!strncmp(opt,"ref=",4))
- ref = simple_strtoul(opt+4,NULL,0);
- else if (!strncmp(opt,"fp",2))
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ else if (!strncmp(opt, "bpp=", 4))
+ bpp = simple_strtoul(opt + 4, NULL, 0);
+ else if (!strncmp(opt, "ref=", 4))
+ ref = simple_strtoul(opt + 4, NULL, 0);
+ else if (!strncmp(opt, "fp", 2))
displaytype = DISPLAY_FP;
- else if (!strncmp(opt,"crt",3))
+ else if (!strncmp(opt, "crt", 3))
displaytype = DISPLAY_CRT;
- else if (!strncmp(opt,"nativex=",8))
- nativex = simple_strtoul(opt+8,NULL,0);
- else if (!strncmp(opt,"center",6))
+ else if (!strncmp(opt, "nativex=", 8))
+ nativex = simple_strtoul(opt + 8, NULL, 0);
+ else if (!strncmp(opt, "center", 6))
center = 1;
- else if (!strncmp(opt,"stretch",7))
+ else if (!strncmp(opt, "stretch", 7))
stretch = 1;
- else if (!strncmp(opt,"pciwb=",6))
- pciwb = simple_strtoul(opt+6,NULL,0);
- else if (!strncmp(opt,"pcirb=",6))
- pcirb = simple_strtoul(opt+6,NULL,0);
- else if (!strncmp(opt,"pciwr=",6))
- pciwr = simple_strtoul(opt+6,NULL,0);
- else if (!strncmp(opt,"pcirr=",6))
- pcirr = simple_strtoul(opt+6,NULL,0);
- else if (!strncmp(opt,"memsize=",8))
- memsize = simple_strtoul(opt+8,NULL,0);
- else if (!strncmp(opt,"verbosity=",10))
- verbosity = simple_strtoul(opt+10,NULL,0);
- else if (!strncmp(opt,"vesafb",6))
- vesafb = 1;
+ else if (!strncmp(opt, "pciwb=", 6))
+ pciwb = simple_strtoul(opt + 6, NULL, 0);
+ else if (!strncmp(opt, "pcirb=", 6))
+ pcirb = simple_strtoul(opt + 6, NULL, 0);
+ else if (!strncmp(opt, "pciwr=", 6))
+ pciwr = simple_strtoul(opt + 6, NULL, 0);
+ else if (!strncmp(opt, "pcirr=", 6))
+ pcirr = simple_strtoul(opt + 6, NULL, 0);
+ else if (!strncmp(opt, "memsize=", 8))
+ memsize = simple_strtoul(opt + 8, NULL, 0);
+ else if (!strncmp(opt, "verbosity=", 10))
+ verbosity = simple_strtoul(opt + 10, NULL, 0);
else
mode = opt;
}
#endif
- output("CyblaFB version %s initializing\n",VERSION);
+ output("CyblaFB version %s initializing\n", VERSION);
return pci_module_init(&cyblafb_pci_driver);
+ return pci_register_driver(&cyblafb_pci_driver);
}
static void __exit cyblafb_exit(void)
Code Review / linux-3.10.git / blobdiff