/spare/repo/netdev-2.6 branch 'ieee80211'

[linux-3.10.git] / drivers / net / wireless / Kconfig

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 1d3231cc471acff346ef9dd6425d66c1b96c4276..5d814dfc8bc09796fbdd66892bf2c06929b94946 100644 (file)
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -137,6 +137,110 @@ config PCMCIA_RAYCS
 comment "Wireless 802.11b ISA/PCI cards support"
        depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 
+config IPW2100
+       tristate "Intel PRO/Wireless 2100 Network Connection"
+       depends on NET_RADIO && PCI && IEEE80211
+       select FW_LOADER
+       ---help---
+          A driver for the Intel PRO/Wireless 2100 Network 
+         Connection 802.11b wireless network adapter.
+
+          See <file:Documentation/networking/README.ipw2100> for information on
+          the capabilities currently enabled in this driver and for tips
+          for debugging issues and problems.
+
+         In order to use this driver, you will need a firmware image for it.
+          You can obtain the firmware from
+         <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
+         will need to place it in /etc/firmware.
+
+          You will also very likely need the Wireless Tools in order to
+          configure your card:
+
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ 
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and remvoed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called ipw2100.ko.
+       
+config IPW2100_PROMISC
+        bool "Enable promiscuous mode"
+        depends on IPW2100
+        ---help---
+         Enables promiscuous/monitor mode support for the ipw2100 driver.
+         With this feature compiled into the driver, you can switch to 
+         promiscuous mode via the Wireless Tool's Monitor mode.  While in this
+         mode, no packets can be sent.
+
+config IPW_DEBUG
+       bool "Enable full debugging output in IPW2100 module."
+       depends on IPW2100
+       ---help---
+         This option will enable debug tracing output for the IPW2100.  
+
+         This will result in the kernel module being ~60k larger.  You can 
+         control which debug output is sent to the kernel log by setting the 
+         value in 
+
+         /sys/bus/pci/drivers/ipw2100/debug_level
+
+         This entry will only exist if this option is enabled.
+
+         If you are not trying to debug or develop the IPW2100 driver, you 
+         most likely want to say N here.
+
+config IPW2200
+       tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
+       depends on IEEE80211 && PCI
+       select FW_LOADER
+       ---help---
+          A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
+         Connection adapters. 
+
+          See <file:Documentation/networking/README.ipw2200> for 
+         information on the capabilities currently enabled in this 
+         driver and for tips for debugging issues and problems.
+
+         In order to use this driver, you will need a firmware image for it.
+          You can obtain the firmware from
+         <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 
+         for information on where to install the firmare images.
+
+          You will also very likely need the Wireless Tools in order to
+          configure your card:
+
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ 
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and remvoed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called ipw2200.ko.
+
+config IPW_DEBUG
+       bool "Enable full debugging output in IPW2200 module."
+       depends on IPW2200
+       ---help---
+         This option will enable debug tracing output for the IPW2200.  
+
+         This will result in the kernel module being ~100k larger.  You can 
+         control which debug output is sent to the kernel log by setting the 
+         value in 
+
+         /sys/bus/pci/drivers/ipw2200/debug_level
+
+         This entry will only exist if this option is enabled.
+
+         To set a value, simply echo an 8-byte hex value to the same file:
+
+         % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
+
+         You can find the list of debug mask values in 
+         drivers/net/wireless/ipw2200.h
+
+         If you are not trying to debug or develop the IPW2200 driver, you 
+         most likely want to say N here.
+
 config AIRO
        tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
        depends on NET_RADIO && ISA && (PCI || BROKEN)
@@ -270,7 +374,7 @@ config PCMCIA_HERMES
 
 config AIRO_CS
        tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-       depends on NET_RADIO && PCMCIA
+       depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
        ---help---
          This is the standard Linux driver to support Cisco/Aironet PCMCIA
          802.11 wireless cards.  This driver is the same as the Aironet
@@ -355,6 +459,8 @@ config PRISM54
          say M here and read <file:Documentation/modules.txt>.  The module
          will be called prism54.ko.
 
+source "drivers/net/wireless/hostap/Kconfig"
+
 # yes, this works even when no drivers are selected
 config NET_WIRELESS
        bool