2a1697bfd69579c11543931813f10b1dd1ddde0e
[linux-3.10.git] / drivers / usb / atm / speedtch.c
1 /******************************************************************************
2  *  speedtch.c  -  Alcatel SpeedTouch USB xDSL modem driver
3  *
4  *  Copyright (C) 2001, Alcatel
5  *  Copyright (C) 2003, Duncan Sands
6  *  Copyright (C) 2004, David Woodhouse
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License as published by the Free
10  *  Software Foundation; either version 2 of the License, or (at your option)
11  *  any later version.
12  *
13  *  This program is distributed in the hope that it will be useful, but WITHOUT
14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
16  *  more details.
17  *
18  *  You should have received a copy of the GNU General Public License along with
19  *  this program; if not, write to the Free Software Foundation, Inc., 59
20  *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
21  *
22  ******************************************************************************/
23
24 #include <linux/module.h>
25 #include <linux/moduleparam.h>
26 #include <linux/gfp.h>
27 #include <linux/kernel.h>
28 #include <linux/sched.h>
29 #include <linux/timer.h>
30 #include <linux/errno.h>
31 #include <linux/proc_fs.h>
32 #include <linux/slab.h>
33 #include <linux/wait.h>
34 #include <linux/list.h>
35 #include <asm/processor.h>
36 #include <asm/uaccess.h>
37 #include <linux/smp_lock.h>
38 #include <linux/interrupt.h>
39 #include <linux/atm.h>
40 #include <linux/atmdev.h>
41 #include <linux/crc32.h>
42 #include <linux/init.h>
43 #include <linux/firmware.h>
44
45 #include "usb_atm.h"
46
47 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
48 #       define USE_FW_LOADER
49 #endif
50
51 #define DRIVER_AUTHOR   "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
52 #define DRIVER_VERSION  "1.8"
53 #define DRIVER_DESC     "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
54
55 static const char speedtch_driver_name[] = "speedtch";
56
57 #define SPEEDTOUCH_VENDORID             0x06b9
58 #define SPEEDTOUCH_PRODUCTID            0x4061
59
60 /* Timeout in jiffies */
61 #define CTRL_TIMEOUT 2000
62 #define DATA_TIMEOUT 2000
63
64 #define OFFSET_7  0             /* size 1 */
65 #define OFFSET_b  1             /* size 8 */
66 #define OFFSET_d  9             /* size 4 */
67 #define OFFSET_e 13             /* size 1 */
68 #define OFFSET_f 14             /* size 1 */
69 #define TOTAL    15
70
71 #define SIZE_7 1
72 #define SIZE_b 8
73 #define SIZE_d 4
74 #define SIZE_e 1
75 #define SIZE_f 1
76
77 static int dl_512_first = 0;
78 static int sw_buffering = 0;
79
80 module_param(dl_512_first, bool, 0444);
81 MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware");
82
83 module_param(sw_buffering, uint, 0444);
84 MODULE_PARM_DESC(sw_buffering, "Enable software buffering");
85
86 #define UDSL_IOCTL_LINE_UP              1
87 #define UDSL_IOCTL_LINE_DOWN            2
88
89 #define SPEEDTCH_ENDPOINT_INT           0x81
90 #define SPEEDTCH_ENDPOINT_DATA          0x07
91 #define SPEEDTCH_ENDPOINT_FIRMWARE      0x05
92
93 #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
94
95 static struct usb_device_id speedtch_usb_ids[] = {
96         {USB_DEVICE(SPEEDTOUCH_VENDORID, SPEEDTOUCH_PRODUCTID)},
97         {}
98 };
99
100 MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
101
102 struct speedtch_instance_data {
103         struct udsl_instance_data u;
104
105         /* Status */
106         struct urb *int_urb;
107         unsigned char int_data[16];
108         struct work_struct poll_work;
109         struct timer_list poll_timer;
110 };
111 /* USB */
112
113 static int speedtch_usb_probe(struct usb_interface *intf,
114                               const struct usb_device_id *id);
115 static void speedtch_usb_disconnect(struct usb_interface *intf);
116 static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
117                               void *user_data);
118 static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs);
119 static void speedtch_poll_status(struct speedtch_instance_data *instance);
120
121 static struct usb_driver speedtch_usb_driver = {
122         .owner          = THIS_MODULE,
123         .name           = speedtch_driver_name,
124         .probe          = speedtch_usb_probe,
125         .disconnect     = speedtch_usb_disconnect,
126         .ioctl          = speedtch_usb_ioctl,
127         .id_table       = speedtch_usb_ids,
128 };
129
130 /***************
131 **  firmware  **
132 ***************/
133
134 static void speedtch_got_firmware(struct speedtch_instance_data *instance,
135                                   int got_it)
136 {
137         int err;
138         struct usb_interface *intf;
139
140         down(&instance->u.serialize);   /* vs self, speedtch_firmware_start */
141         if (instance->u.status == UDSL_LOADED_FIRMWARE)
142                 goto out;
143         if (!got_it) {
144                 instance->u.status = UDSL_NO_FIRMWARE;
145                 goto out;
146         }
147         if ((err = usb_set_interface(instance->u.usb_dev, 1, 1)) < 0) {
148                 dbg("speedtch_got_firmware: usb_set_interface returned %d!", err);
149                 instance->u.status = UDSL_NO_FIRMWARE;
150                 goto out;
151         }
152
153         /* Set up interrupt endpoint */
154         intf = usb_ifnum_to_if(instance->u.usb_dev, 0);
155         if (intf && !usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) {
156
157                 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
158                 if (instance->int_urb) {
159
160                         usb_fill_int_urb(instance->int_urb, instance->u.usb_dev,
161                                          usb_rcvintpipe(instance->u.usb_dev, SPEEDTCH_ENDPOINT_INT),
162                                          instance->int_data,
163                                          sizeof(instance->int_data),
164                                          speedtch_handle_int, instance, 50);
165                         err = usb_submit_urb(instance->int_urb, GFP_KERNEL);
166                         if (err) {
167                                 /* Doesn't matter; we'll poll anyway */
168                                 dbg("speedtch_got_firmware: Submission of interrupt URB failed %d", err);
169                                 usb_free_urb(instance->int_urb);
170                                 instance->int_urb = NULL;
171                                 usb_driver_release_interface(&speedtch_usb_driver, intf);
172                         }
173                 }
174         }
175         /* Start status polling */
176         mod_timer(&instance->poll_timer, jiffies + (1 * HZ));
177
178         instance->u.status = UDSL_LOADED_FIRMWARE;
179         tasklet_schedule(&instance->u.receive_tasklet);
180  out:
181         up(&instance->u.serialize);
182         wake_up_interruptible(&instance->u.firmware_waiters);
183 }
184
185 static int speedtch_set_swbuff(struct speedtch_instance_data *instance,
186                                int state)
187 {
188         struct usb_device *dev = instance->u.usb_dev;
189         int ret;
190
191         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
192                               0x32, 0x40, state ? 0x01 : 0x00,
193                               0x00, NULL, 0, 100);
194         if (ret < 0) {
195                 printk("Warning: %sabling SW buffering: usb_control_msg returned %d\n",
196                      state ? "En" : "Dis", ret);
197                 return ret;
198         }
199
200         dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
201         return 0;
202 }
203
204 static void speedtch_test_sequence(struct speedtch_instance_data *instance)
205 {
206         struct usb_device *dev = instance->u.usb_dev;
207         unsigned char buf[10];
208         int ret;
209
210         /* URB 147 */
211         buf[0] = 0x1c;
212         buf[1] = 0x50;
213         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
214                               0x01, 0x40, 0x0b, 0x00, buf, 2, 100);
215         if (ret < 0)
216                 printk(KERN_WARNING "%s failed on URB147: %d\n", __func__, ret);
217
218         /* URB 148 */
219         buf[0] = 0x32;
220         buf[1] = 0x00;
221         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
222                               0x01, 0x40, 0x02, 0x00, buf, 2, 100);
223         if (ret < 0)
224                 printk(KERN_WARNING "%s failed on URB148: %d\n", __func__, ret);
225
226         /* URB 149 */
227         buf[0] = 0x01;
228         buf[1] = 0x00;
229         buf[2] = 0x01;
230         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
231                               0x01, 0x40, 0x03, 0x00, buf, 3, 100);
232         if (ret < 0)
233                 printk(KERN_WARNING "%s failed on URB149: %d\n", __func__, ret);
234
235         /* URB 150 */
236         buf[0] = 0x01;
237         buf[1] = 0x00;
238         buf[2] = 0x01;
239         ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
240                               0x01, 0x40, 0x04, 0x00, buf, 3, 100);
241         if (ret < 0)
242                 printk(KERN_WARNING "%s failed on URB150: %d\n", __func__, ret);
243 }
244
245 static int speedtch_start_synchro(struct speedtch_instance_data *instance)
246 {
247         struct usb_device *dev = instance->u.usb_dev;
248         unsigned char buf[2];
249         int ret;
250
251         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
252                               0x12, 0xc0, 0x04, 0x00,
253                               buf, sizeof(buf), CTRL_TIMEOUT);
254         if (ret < 0) {
255                 printk(KERN_WARNING "SpeedTouch: Failed to start ADSL synchronisation: %d\n", ret);
256                 return ret;
257         }
258
259         dbg("speedtch_start_synchro: modem prodded. %d Bytes returned: %02x %02x", ret, buf[0], buf[1]);
260         return 0;
261 }
262
263 static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs)
264 {
265         struct speedtch_instance_data *instance = urb->context;
266         unsigned int count = urb->actual_length;
267         int ret;
268
269         /* The magic interrupt for "up state" */
270         const static unsigned char up_int[6]   = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
271         /* The magic interrupt for "down state" */
272         const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
273
274         switch (urb->status) {
275         case 0:
276                 /* success */
277                 break;
278         case -ECONNRESET:
279         case -ENOENT:
280         case -ESHUTDOWN:
281                 /* this urb is terminated; clean up */
282                 dbg("%s - urb shutting down with status: %d", __func__, urb->status);
283                 return;
284         default:
285                 dbg("%s - nonzero urb status received: %d", __func__, urb->status);
286                 goto exit;
287         }
288
289         if (count < 6) {
290                 dbg("%s - int packet too short", __func__);
291                 goto exit;
292         }
293
294         if (!memcmp(up_int, instance->int_data, 6)) {
295                 del_timer(&instance->poll_timer);
296                 printk(KERN_NOTICE "DSL line goes up\n");
297         } else if (!memcmp(down_int, instance->int_data, 6)) {
298                 printk(KERN_NOTICE "DSL line goes down\n");
299         } else {
300                 int i;
301
302                 printk(KERN_DEBUG "Unknown interrupt packet of %d bytes:", count);
303                 for (i = 0; i < count; i++)
304                         printk(" %02x", instance->int_data[i]);
305                 printk("\n");
306         }
307         schedule_work(&instance->poll_work);
308
309  exit:
310         rmb();
311         if (!instance->int_urb)
312                 return;
313
314         ret = usb_submit_urb(urb, GFP_ATOMIC);
315         if (ret)
316                 err("%s - usb_submit_urb failed with result %d", __func__, ret);
317 }
318
319 static int speedtch_get_status(struct speedtch_instance_data *instance,
320                                unsigned char *buf)
321 {
322         struct usb_device *dev = instance->u.usb_dev;
323         int ret;
324
325         memset(buf, 0, TOTAL);
326
327         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
328                               0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
329                               CTRL_TIMEOUT);
330         if (ret < 0) {
331                 dbg("MSG 7 failed");
332                 return ret;
333         }
334
335         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
336                               0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
337                               CTRL_TIMEOUT);
338         if (ret < 0) {
339                 dbg("MSG B failed");
340                 return ret;
341         }
342
343         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
344                               0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
345                               CTRL_TIMEOUT);
346         if (ret < 0) {
347                 dbg("MSG D failed");
348                 return ret;
349         }
350
351         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
352                               0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
353                               CTRL_TIMEOUT);
354         if (ret < 0) {
355                 dbg("MSG E failed");
356                 return ret;
357         }
358
359         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
360                               0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
361                               CTRL_TIMEOUT);
362         if (ret < 0) {
363                 dbg("MSG F failed");
364                 return ret;
365         }
366
367         return 0;
368 }
369
370 static void speedtch_poll_status(struct speedtch_instance_data *instance)
371 {
372         unsigned char buf[TOTAL];
373         int ret;
374
375         ret = speedtch_get_status(instance, buf);
376         if (ret) {
377                 printk(KERN_WARNING
378                        "SpeedTouch: Error %d fetching device status\n", ret);
379                 return;
380         }
381
382         dbg("Line state %02x", buf[OFFSET_7]);
383
384         switch (buf[OFFSET_7]) {
385         case 0:
386                 if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) {
387                         instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
388                         printk(KERN_NOTICE "ADSL line is down\n");
389                         /* It'll never resync again unless we ask it to... */
390                         speedtch_start_synchro(instance);
391                 }
392                 break;
393
394         case 0x08:
395                 if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
396                         instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
397                         printk(KERN_NOTICE "ADSL line is blocked?\n");
398                 }
399                 break;
400
401         case 0x10:
402                 if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) {
403                         instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
404                         printk(KERN_NOTICE "ADSL line is synchronising\n");
405                 }
406                 break;
407
408         case 0x20:
409                 if (instance->u.atm_dev->signal != ATM_PHY_SIG_FOUND) {
410                         int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
411                                 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
412                         int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
413                                 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
414
415                         if (!(down_speed & 0x0000ffff) &&
416                             !(up_speed & 0x0000ffff)) {
417                                 down_speed >>= 16;
418                                 up_speed >>= 16;
419                         }
420                         instance->u.atm_dev->link_rate = down_speed * 1000 / 424;
421                         instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
422
423                         printk(KERN_NOTICE
424                                "ADSL line is up (%d Kib/s down | %d Kib/s up)\n",
425                                down_speed, up_speed);
426                 }
427                 break;
428
429         default:
430                 if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
431                         instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
432                         printk(KERN_NOTICE "Unknown line state %02x\n", buf[OFFSET_7]);
433                 }
434                 break;
435         }
436 }
437
438 static void speedtch_timer_poll(unsigned long data)
439 {
440         struct speedtch_instance_data *instance = (void *)data;
441
442         schedule_work(&instance->poll_work);
443         mod_timer(&instance->poll_timer, jiffies + (5 * HZ));
444 }
445
446 #ifdef USE_FW_LOADER
447 static void speedtch_upload_firmware(struct speedtch_instance_data *instance,
448                                      const struct firmware *fw1,
449                                      const struct firmware *fw2)
450 {
451         unsigned char *buffer;
452         struct usb_device *usb_dev = instance->u.usb_dev;
453         struct usb_interface *intf;
454         int actual_length, ret;
455         int offset;
456
457         dbg("speedtch_upload_firmware");
458
459         if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
460                 dbg("speedtch_upload_firmware: interface not found!");
461                 goto fail;
462         }
463
464         if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
465                 dbg("speedtch_upload_firmware: no memory for buffer!");
466                 goto fail;
467         }
468
469         /* A user-space firmware loader may already have claimed interface #2 */
470         if ((ret =
471              usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) < 0) {
472                 dbg("speedtch_upload_firmware: interface in use (%d)!", ret);
473                 goto fail_free;
474         }
475
476         /* URB 7 */
477         if (dl_512_first) {     /* some modems need a read before writing the firmware */
478                 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
479                                    buffer, 0x200, &actual_length, 2000);
480
481                 if (ret < 0 && ret != -ETIMEDOUT)
482                         dbg("speedtch_upload_firmware: read BLOCK0 from modem failed (%d)!", ret);
483                 else
484                         dbg("speedtch_upload_firmware: BLOCK0 downloaded (%d bytes)", ret);
485         }
486
487         /* URB 8 : both leds are static green */
488         for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
489                 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
490                 memcpy(buffer, fw1->data + offset, thislen);
491
492                 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
493                                    buffer, thislen, &actual_length, DATA_TIMEOUT);
494
495                 if (ret < 0) {
496                         dbg("speedtch_upload_firmware: write BLOCK1 to modem failed (%d)!", ret);
497                         goto fail_release;
498                 }
499                 dbg("speedtch_upload_firmware: BLOCK1 uploaded (%zu bytes)", fw1->size);
500         }
501
502         /* USB led blinking green, ADSL led off */
503
504         /* URB 11 */
505         ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
506                            buffer, 0x200, &actual_length, DATA_TIMEOUT);
507
508         if (ret < 0) {
509                 dbg("speedtch_upload_firmware: read BLOCK2 from modem failed (%d)!", ret);
510                 goto fail_release;
511         }
512         dbg("speedtch_upload_firmware: BLOCK2 downloaded (%d bytes)", actual_length);
513
514         /* URBs 12 to 139 - USB led blinking green, ADSL led off */
515         for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
516                 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
517                 memcpy(buffer, fw2->data + offset, thislen);
518
519                 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
520                                    buffer, thislen, &actual_length, DATA_TIMEOUT);
521
522                 if (ret < 0) {
523                         dbg("speedtch_upload_firmware: write BLOCK3 to modem failed (%d)!", ret);
524                         goto fail_release;
525                 }
526         }
527         dbg("speedtch_upload_firmware: BLOCK3 uploaded (%zu bytes)", fw2->size);
528
529         /* USB led static green, ADSL led static red */
530
531         /* URB 142 */
532         ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
533                            buffer, 0x200, &actual_length, DATA_TIMEOUT);
534
535         if (ret < 0) {
536                 dbg("speedtch_upload_firmware: read BLOCK4 from modem failed (%d)!", ret);
537                 goto fail_release;
538         }
539
540         /* success */
541         dbg("speedtch_upload_firmware: BLOCK4 downloaded (%d bytes)", actual_length);
542
543         /* Delay to allow firmware to start up. We can do this here
544            because we're in our own kernel thread anyway. */
545         msleep(1000);
546
547         /* Enable software buffering, if requested */
548         if (sw_buffering)
549                 speedtch_set_swbuff(instance, 1);
550
551         /* Magic spell; don't ask us what this does */
552         speedtch_test_sequence(instance);
553
554         /* Start modem synchronisation */
555         if (speedtch_start_synchro(instance))
556                 dbg("speedtch_start_synchro: failed");
557
558         speedtch_got_firmware(instance, 1);
559
560         free_page((unsigned long)buffer);
561         return;
562
563  fail_release:
564         /* Only release interface #2 if uploading failed; we don't release it
565            we succeeded.  This prevents the userspace tools from trying to load
566            the firmware themselves */
567         usb_driver_release_interface(&speedtch_usb_driver, intf);
568  fail_free:
569         free_page((unsigned long)buffer);
570  fail:
571         speedtch_got_firmware(instance, 0);
572 }
573
574 static int speedtch_find_firmware(struct speedtch_instance_data
575                                   *instance, int phase,
576                                   const struct firmware **fw_p)
577 {
578         char buf[24];
579         const u16 bcdDevice = le16_to_cpu(instance->u.usb_dev->descriptor.bcdDevice);
580         const u8 major_revision = bcdDevice >> 8;
581         const u8 minor_revision = bcdDevice & 0xff;
582
583         sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
584         dbg("speedtch_find_firmware: looking for %s", buf);
585
586         if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
587                 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
588                 dbg("speedtch_find_firmware: looking for %s", buf);
589
590                 if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
591                         sprintf(buf, "speedtch-%d.bin", phase);
592                         dbg("speedtch_find_firmware: looking for %s", buf);
593
594                         if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
595                                 dev_warn(&instance->u.usb_dev->dev, "no stage %d firmware found!", phase);
596                                 return -ENOENT;
597                         }
598                 }
599         }
600
601         dev_info(&instance->u.usb_dev->dev, "found stage %d firmware %s\n", phase, buf);
602
603         return 0;
604 }
605
606 static int speedtch_load_firmware(void *arg)
607 {
608         const struct firmware *fw1, *fw2;
609         struct speedtch_instance_data *instance = arg;
610
611         BUG_ON(!instance);
612
613         daemonize("firmware/speedtch");
614
615         if (!speedtch_find_firmware(instance, 1, &fw1)) {
616                 if (!speedtch_find_firmware(instance, 2, &fw2)) {
617                         speedtch_upload_firmware(instance, fw1, fw2);
618                         release_firmware(fw2);
619                 }
620                 release_firmware(fw1);
621         }
622
623         /* In case we failed, set state back to NO_FIRMWARE so that
624            another later attempt may work. Otherwise, we never actually
625            manage to recover if, for example, the firmware is on /usr and
626            we look for it too early. */
627         speedtch_got_firmware(instance, 0);
628
629         module_put(THIS_MODULE);
630         udsl_put_instance(&instance->u);
631         return 0;
632 }
633 #endif /* USE_FW_LOADER */
634
635 static void speedtch_firmware_start(struct speedtch_instance_data *instance)
636 {
637 #ifdef USE_FW_LOADER
638         int ret;
639 #endif
640
641         dbg("speedtch_firmware_start");
642
643         down(&instance->u.serialize);   /* vs self, speedtch_got_firmware */
644
645         if (instance->u.status >= UDSL_LOADING_FIRMWARE) {
646                 up(&instance->u.serialize);
647                 return;
648         }
649
650         instance->u.status = UDSL_LOADING_FIRMWARE;
651         up(&instance->u.serialize);
652
653 #ifdef USE_FW_LOADER
654         udsl_get_instance(&instance->u);
655         try_module_get(THIS_MODULE);
656
657         ret = kernel_thread(speedtch_load_firmware, instance,
658                             CLONE_FS | CLONE_FILES);
659
660         if (ret >= 0)
661                 return;         /* OK */
662
663         dbg("speedtch_firmware_start: kernel_thread failed (%d)!", ret);
664
665         module_put(THIS_MODULE);
666         udsl_put_instance(&instance->u);
667         /* Just pretend it never happened... hope modem_run happens */
668 #endif                          /* USE_FW_LOADER */
669
670         speedtch_got_firmware(instance, 0);
671 }
672
673 static int speedtch_firmware_wait(struct udsl_instance_data *instance)
674 {
675         speedtch_firmware_start((void *)instance);
676
677         if (wait_event_interruptible(instance->firmware_waiters, instance->status != UDSL_LOADING_FIRMWARE) < 0)
678                 return -ERESTARTSYS;
679
680         return (instance->status == UDSL_LOADED_FIRMWARE) ? 0 : -EAGAIN;
681 }
682
683 /**********
684 **  USB  **
685 **********/
686
687 static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
688                               void *user_data)
689 {
690         struct speedtch_instance_data *instance = usb_get_intfdata(intf);
691
692         dbg("speedtch_usb_ioctl entered");
693
694         if (!instance) {
695                 dbg("speedtch_usb_ioctl: NULL instance!");
696                 return -ENODEV;
697         }
698
699         switch (code) {
700         case UDSL_IOCTL_LINE_UP:
701                 instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
702                 speedtch_got_firmware(instance, 1);
703                 return (instance->u.status == UDSL_LOADED_FIRMWARE) ? 0 : -EIO;
704         case UDSL_IOCTL_LINE_DOWN:
705                 instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
706                 return 0;
707         default:
708                 return -ENOTTY;
709         }
710 }
711
712 static int speedtch_usb_probe(struct usb_interface *intf,
713                               const struct usb_device_id *id)
714 {
715         struct usb_device *dev = interface_to_usbdev(intf);
716         int ifnum = intf->altsetting->desc.bInterfaceNumber;
717         struct speedtch_instance_data *instance;
718         unsigned char mac_str[13];
719         int ret, i;
720         char buf7[SIZE_7];
721
722         dbg("speedtch_usb_probe: trying device with vendor=0x%x, product=0x%x, ifnum %d",
723             le16_to_cpu(dev->descriptor.idVendor),
724             le16_to_cpu(dev->descriptor.idProduct), ifnum);
725
726         if ((dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) || 
727             (ifnum != 1))
728                 return -ENODEV;
729
730         dbg("speedtch_usb_probe: device accepted");
731
732         /* instance init */
733         instance = kmalloc(sizeof(*instance), GFP_KERNEL);
734         if (!instance) {
735                 dbg("speedtch_usb_probe: no memory for instance data!");
736                 return -ENOMEM;
737         }
738
739         memset(instance, 0, sizeof(struct speedtch_instance_data));
740
741         if ((ret = usb_set_interface(dev, 0, 0)) < 0)
742                 goto fail;
743
744         if ((ret = usb_set_interface(dev, 2, 0)) < 0)
745                 goto fail;
746
747         instance->u.data_endpoint = SPEEDTCH_ENDPOINT_DATA;
748         instance->u.firmware_wait = speedtch_firmware_wait;
749         instance->u.driver_name = speedtch_driver_name;
750
751         ret = udsl_instance_setup(dev, &instance->u);
752         if (ret)
753                 goto fail;
754
755         init_timer(&instance->poll_timer);
756         instance->poll_timer.function = speedtch_timer_poll;
757         instance->poll_timer.data = (unsigned long)instance;
758
759         INIT_WORK(&instance->poll_work, (void *)speedtch_poll_status, instance);
760
761         /* set MAC address, it is stored in the serial number */
762         memset(instance->u.atm_dev->esi, 0, sizeof(instance->u.atm_dev->esi));
763         if (usb_string(dev, dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
764                 for (i = 0; i < 6; i++)
765                         instance->u.atm_dev->esi[i] =
766                                 (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
767         }
768
769         /* First check whether the modem already seems to be alive */
770         ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
771                               0x12, 0xc0, 0x07, 0x00, buf7, SIZE_7, 500);
772
773         if (ret == SIZE_7) {
774                 dbg("firmware appears to be already loaded");
775                 speedtch_got_firmware(instance, 1);
776                 speedtch_poll_status(instance);
777         } else {
778                 speedtch_firmware_start(instance);
779         }
780
781         usb_set_intfdata(intf, instance);
782
783         return 0;
784
785  fail:
786         kfree(instance);
787
788         return -ENOMEM;
789 }
790
791 static void speedtch_usb_disconnect(struct usb_interface *intf)
792 {
793         struct speedtch_instance_data *instance = usb_get_intfdata(intf);
794
795         dbg("speedtch_usb_disconnect entered");
796
797         if (!instance) {
798                 dbg("speedtch_usb_disconnect: NULL instance!");
799                 return;
800         }
801
802 /*QQ need to handle disconnects on interface #2 while uploading firmware */
803 /*QQ and what about interface #1? */
804
805         if (instance->int_urb) {
806                 struct urb *int_urb = instance->int_urb;
807                 instance->int_urb = NULL;
808                 wmb();
809                 usb_unlink_urb(int_urb);
810                 usb_free_urb(int_urb);
811         }
812
813         instance->int_data[0] = 1;
814         del_timer_sync(&instance->poll_timer);
815         wmb();
816         flush_scheduled_work();
817
818         udsl_instance_disconnect(&instance->u);
819
820         /* clean up */
821         usb_set_intfdata(intf, NULL);
822         udsl_put_instance(&instance->u);
823 }
824
825 /***********
826 **  init  **
827 ***********/
828
829 static int __init speedtch_usb_init(void)
830 {
831         dbg("speedtch_usb_init: driver version " DRIVER_VERSION);
832
833         return usb_register(&speedtch_usb_driver);
834 }
835
836 static void __exit speedtch_usb_cleanup(void)
837 {
838         dbg("speedtch_usb_cleanup entered");
839
840         usb_deregister(&speedtch_usb_driver);
841 }
842
843 module_init(speedtch_usb_init);
844 module_exit(speedtch_usb_cleanup);
845
846 MODULE_AUTHOR(DRIVER_AUTHOR);
847 MODULE_DESCRIPTION(DRIVER_DESC);
848 MODULE_LICENSE("GPL");
849 MODULE_VERSION(DRIVER_VERSION);