linux-2.6.git
16 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Tue, 31 Jan 2006 21:12:41 +0000 (13:12 -0800)]
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

16 years agoFix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST
Linus Torvalds [Tue, 31 Jan 2006 21:11:41 +0000 (13:11 -0800)]
Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST

Modern versions of gcc do not like case statements at the end of a block
statement: you need at least an empty statement.  Using just a "break;"
is preferred for visual style.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[SCSI] ServeRAID: prevent seeing DADSI devices
Jack Hammer [Tue, 31 Jan 2006 18:17:55 +0000 (13:17 -0500)]
[SCSI] ServeRAID: prevent seeing DADSI devices

A critical thing the ServeRAID driver MUST do is hide the physical DASDI
devices from the OS. It does this by intercepting the INQUIRY commands.

In recent 2.6.15 testing, I discovered this to be failing.

The cause was the driver assuming that the INQUIRY response data was in a
simple single buffer, when it was actually a 1 element scatter gather list.

This patch makes ips always look at the correct data when examining an
INQUIRY response.

Signed-off-by: Jack Hammer <jack_hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: add message sanity check
Moore, Eric [Wed, 18 Jan 2006 00:06:29 +0000 (17:06 -0700)]
[SCSI] fusion: add message sanity check

This adds a sanity check in the interrupt routine
insures incoming message frames are a valid
message frames.

The code for setting 0xdeadbeaf in the freed message
frames, apparently was already submitted by Christoph
in previous patch submission.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices
Moore, Eric [Wed, 18 Jan 2006 00:06:26 +0000 (17:06 -0700)]
[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices

This patch inhibits sending spi negotiation parameters
for non-configured devices from the slave_destroy function.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: unloading the driver results in panic - fix
Moore, Eric [Wed, 18 Jan 2006 00:06:23 +0000 (17:06 -0700)]
[SCSI] fusion: unloading the driver results in panic - fix

The ioc->alt_ioc->alt_ioc pointer is not getting cleared
during driver unload time.   This dangling pointer
can result in panic in certain circumstances, such
as error recovery, or firmware download in flashless
environments. This only impacts dual functions controllers,
such as 1030. Please apply.

This patch also includes a small cosmetic name change
for mpt_spi_log_info.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] mptsas: don't complain on bogus slave_alloc calls
Christoph Hellwig [Mon, 30 Jan 2006 18:00:43 +0000 (19:00 +0100)]
[SCSI] mptsas: don't complain on bogus slave_alloc calls

When people use the userspace scanning facilities on SAS hardware the
LLDD gets bogus slave_alloc calls.  Just fail those gracefully instead
of printing a warning in mptsas and another one in the midlayer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: add task managment response code info
Moore, Eric [Tue, 17 Jan 2006 01:53:26 +0000 (18:53 -0700)]
[SCSI] fusion: add task managment response code info

Adding verbose message returned from firmware
when a task mangment request fails.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: add MSI support
Christoph Hellwig [Tue, 17 Jan 2006 13:44:29 +0000 (13:44 +0000)]
[SCSI] fusion: add MSI support

On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote:
> Adding MSI support, and command line for enabling
> it.  By default, the command line option has MSI disabled.

mpt_msi_enable is initialized to 0 implicitly, no need to do that.  Also
replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable).

Updated patch below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: overrun tape fix
Moore, Eric [Tue, 17 Jan 2006 01:53:21 +0000 (18:53 -0700)]
[SCSI] fusion: overrun tape fix

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: add verbose messages for RAID actions
Moore, Eric [Tue, 17 Jan 2006 01:53:19 +0000 (18:53 -0700)]
[SCSI] fusion: add verbose messages for RAID actions

A customer request to send raid asyn actions
from firmware to the event syslog.  This shows
when raid volumes go degraded, or complete resync,
or volumes created/deleted, etc.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes
Moore, Eric [Tue, 17 Jan 2006 01:53:16 +0000 (18:53 -0700)]
[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes

Increasing the reply frame size by 16 bytes, to
be in sync with the other fusion drivers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi
Christoph Hellwig [Tue, 17 Jan 2006 13:43:14 +0000 (13:43 +0000)]
[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi

On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote:
> The task managment request timeout in the eh threads was set
> for U320 timing, which is between 2-5 seconds.
> This is too small for FC and SAS.
> According to the firmware engineers, Fibre needs to be 40 seconds
> and SAS needs to be 10 seconds.

The timeout selection should probably be done in a little helper instead
of duplicated in a few places.  Updated patch below.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: mptsas, increase discovery timout to 300 seconds
Moore, Eric [Tue, 17 Jan 2006 01:53:11 +0000 (18:53 -0700)]
[SCSI] fusion: mptsas, increase discovery timout to 300 seconds

Increase the port enable timeout only for SAS from 30 to 300 seconds.
A customer request for the handling large topologies.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: spi bus reset when driver loads
Moore, Eric [Tue, 17 Jan 2006 01:53:06 +0000 (18:53 -0700)]
[SCSI] fusion: spi bus reset when driver loads

This patch is for spi.  This issues bus reset when driver
loads. Handling cases when initator has negotiated for packetized,
and target negotiated for non-packetized; effectly this bus reset
is getting both target and initiator on the same sheet of music.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] aic79xx: Fix timer handling
Hannes Reinecke [Mon, 30 Jan 2006 15:10:31 +0000 (16:10 +0100)]
[SCSI] aic79xx: Fix timer handling

Fix the timer handling in aic79xx to use the SCSI-ML provided handling
instead of implementing our own.
It also fixes a deadlock in the command recovery code.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] aic7xxx: update documentation
Hannes Reinecke [Tue, 24 Jan 2006 09:45:35 +0000 (10:45 +0100)]
[SCSI] aic7xxx: update documentation

This patch updates the documentation for aic7xxx and aic79xx with fixes
from the adaptec driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] aic79xx: SLOWCRC fix
Hannes Reinecke [Tue, 24 Jan 2006 09:44:38 +0000 (10:44 +0100)]
[SCSI] aic79xx: SLOWCRC fix

This patch introduces the SLOWCRC handling for certain buggy chipsets.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] aic79xx: sequencer fixes
Hannes Reinecke [Tue, 24 Jan 2006 09:43:26 +0000 (10:43 +0100)]
[SCSI] aic79xx: sequencer fixes

This patch updates the aic79xx sequencer with latest fixes from adaptec.
The sequencer code now corresponds with adaptec version 2.0.15.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] aic7xxx: Update aicasm
Hannes Reinecke [Tue, 24 Jan 2006 09:41:45 +0000 (10:41 +0100)]
[SCSI] aic7xxx: Update aicasm

This patchset updates aicasm code with the latest fixes from adaptec.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: fix compile
James Bottomley [Sun, 29 Jan 2006 18:10:24 +0000 (12:10 -0600)]
[SCSI] fusion: fix compile

The prior fusion patches moved an invocation of a function,
mptscsih_TMHandler(), static to mptscsih.c into mptsas.c

Make the function unstatic, move the header to mptscsih.h and export it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: bump version
Moore, Eric [Thu, 26 Jan 2006 01:05:21 +0000 (18:05 -0700)]
[SCSI] fusion: bump version

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: FC rport code fixes
Michael Reed [Thu, 26 Jan 2006 01:05:18 +0000 (18:05 -0700)]
[SCSI] fusion: FC rport code fixes

This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: move sas persistent event handling over to the mptsas module
Moore, Eric [Thu, 26 Jan 2006 01:05:15 +0000 (18:05 -0700)]
[SCSI] fusion: move sas persistent event handling over to the mptsas module

This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: target reset when drive is being removed
Moore, Eric [Thu, 26 Jan 2006 01:05:12 +0000 (18:05 -0700)]
[SCSI] fusion: target reset when drive is being removed

The issuing of the target reset
used in device hot removal case so the
firmware queue is flushed out off outstanding
commands.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] fusion: add support for raid hot add/del support
Moore, Eric [Thu, 26 Jan 2006 23:20:06 +0000 (16:20 -0700)]
[SCSI] fusion: add support for raid hot add/del support

RAID event support.

This will hot add and remove raid volumes
when managment application creates and
deletes the volumes.  The driver is basically
responding to firmware asyn events, and reporting
the changes to the above layers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] scsi_transport_sas.c: display port identifier
Moore, Eric [Thu, 26 Jan 2006 23:20:02 +0000 (16:20 -0700)]
[SCSI] scsi_transport_sas.c: display port identifier

This patch displays the port identifier on
the folder attribute; located in the middle digit.

/sys/class/sas_rphy/rphy-%x:%x:%x

The port identifier is basically the unique identifier
for each sas domain.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 31 Jan 2006 19:31:54 +0000 (11:31 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

16 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 31 Jan 2006 19:31:02 +0000 (11:31 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

16 years ago[PATCH] rcu_torture_lock deadlock fix
Ingo Molnar [Wed, 25 Jan 2006 18:50:12 +0000 (19:50 +0100)]
[PATCH] rcu_torture_lock deadlock fix

rcu_torture_lock is used in a softirq-unsafe manner, but it is also
taken by rcu_torture_cb(), which may execute in softirq-context,
resulting in potential deadlocks.

The fix is to acquire rcu_torture_lock in a softirq-safe manner.  With
this fix applied, the rcu-torture code passes validation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fix deadlock in drivers/pci/msi.c
Ingo Molnar [Thu, 26 Jan 2006 00:42:11 +0000 (01:42 +0100)]
[PATCH] fix deadlock in drivers/pci/msi.c

The lock validator caught another one: drivers/pci/msi.c is accessing
&irq_desc[i].lock with interrupts enabled (!).

The fix is to disable interrupts properly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fix uidhash_lock <-> RCU deadlock
Ingo Molnar [Wed, 25 Jan 2006 14:23:07 +0000 (15:23 +0100)]
[PATCH] fix uidhash_lock <-> RCU deadlock

RCU task-struct freeing can call free_uid(), which is taking
uidhash_lock - while other users of uidhash_lock are softirq-unsafe.

The fix is to always take the uidhash_spinlock in a softirq-safe manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years agoMerge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 31 Jan 2006 19:22:40 +0000 (11:22 -0800)]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

16 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 31 Jan 2006 18:29:35 +0000 (10:29 -0800)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

16 years ago[PATCH] Fix boot-time slowdown for measure_migration_cost
Ingo Molnar [Mon, 30 Jan 2006 19:24:38 +0000 (20:24 +0100)]
[PATCH] Fix boot-time slowdown for measure_migration_cost

This reduces the amount of time the migration cost calculations cost
during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 31 Jan 2006 18:21:13 +0000 (10:21 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

16 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 31 Jan 2006 18:20:49 +0000 (10:20 -0800)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

16 years agoDon't try to "validate" a non-existing timeval.
Linus Torvalds [Tue, 31 Jan 2006 18:16:55 +0000 (10:16 -0800)]
Don't try to "validate" a non-existing timeval.

settime() with a NULL timeval is silly but legal.

Noticed by Dave Jones <davej@redhat.com>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] Clarify help text of SKGE/SK98LIN/SKY2
Daniel Drake [Sat, 21 Jan 2006 19:35:34 +0000 (19:35 +0000)]
[PATCH] Clarify help text of SKGE/SK98LIN/SKY2

Some users have commented that it is unclear which driver they should be
using for their Marvell/SysKonnect network adapter, and which ones
are/aren't interchangable.

This patch attempts to reduce the confusion.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Tue, 31 Jan 2006 16:50:11 +0000 (11:50 -0500)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

16 years ago[BLOCK] A few kerneldoc fixups
Jens Axboe [Tue, 31 Jan 2006 14:24:34 +0000 (15:24 +0100)]
[BLOCK] A few kerneldoc fixups

Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[TCP] H-TCP: Fix accounting
Baruch Even [Tue, 31 Jan 2006 04:54:39 +0000 (20:54 -0800)]
[TCP] H-TCP: Fix accounting

This fixes the accounting in H-TCP, the ccount variable is also
adjusted a few lines above this one.

This line was not supposed to be there and wasn't there in the patches
originally submitted, the four patches submitted were merged to one
and in that merge the bug was introduced.

Signed-Off-By: Baruch Even <baruch@ev-en.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] igmp: remove pointless printk
Dave Jones [Tue, 31 Jan 2006 04:27:17 +0000 (20:27 -0800)]
[IPV4] igmp: remove pointless printk

This is easily triggerable by sending bogus packets,
allowing a malicious user to flood remote logs.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SPARC]: Fix compile failures in math-emu.
David S. Miller [Tue, 31 Jan 2006 00:46:24 +0000 (16:46 -0800)]
[SPARC]: Fix compile failures in math-emu.

Kill debugging default switch cases in do_one_mathemu().
That case is handled properly already and gcc hates
the empty statement that results when the debug code is
disabled.

Pointed out by kaffe.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: heartbeats exceed maximum retransmssion limit
Vlad Yasevich [Tue, 31 Jan 2006 00:00:40 +0000 (16:00 -0800)]
[SCTP]: heartbeats exceed maximum retransmssion limit

The number of HEARTBEAT chunks that an association may transmit is
limited by Association.Max.Retrans count; however, the code allows
us to send one extra heartbeat.

This patch limits the number of heartbeats to the maximum count.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: correct the number of INIT retransmissions
Vlad Yasevich [Mon, 30 Jan 2006 23:59:54 +0000 (15:59 -0800)]
[SCTP]: correct the number of INIT retransmissions

We currently count the initial INIT/COOKIE_ECHO chunk toward the
retransmit count and thus sends a total of sctp_max_retrans_init chunks.
The correct behavior is to retransmit the chunk sctp_max_retrans_init in
addition to sending the original.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration
Adrian Bunk [Mon, 30 Jan 2006 18:23:17 +0000 (19:23 +0100)]
[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration

CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile.

Reported by "Gabriel C." <crazy@pimpmylinux.org>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] Typo corrections for ieee80211
Larry Finger [Mon, 30 Jan 2006 15:42:24 +0000 (09:42 -0600)]
[PATCH] Typo corrections for ieee80211

This patch, generated against 2.6.16-rc1-git4, corrects two typographical
errors in ieee80211_rx.c and adds the facility name to a bare printk.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ipw2200: Fix a variable referenced after kfree() bug
Zhu Yi [Tue, 24 Jan 2006 08:37:41 +0000 (16:37 +0800)]
[PATCH] ipw2200: Fix a variable referenced after kfree() bug

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem
Zhu Yi [Tue, 24 Jan 2006 08:36:31 +0000 (16:36 +0800)]
[PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic
Zhu Yi [Tue, 24 Jan 2006 08:36:22 +0000 (16:36 +0800)]
[PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ipw2100: Fix setting txpower failed problem
Zhu Yi [Tue, 24 Jan 2006 05:49:32 +0000 (13:49 +0800)]
[PATCH] ipw2100: Fix setting txpower failed problem

The ipw2100 driver misunderstood the parameter of txpower.
Tx Power off means turn off the radio, but the driver interpret it as
"can't set txpower". So when getting the txpower, it sets disabled=1 to
the iwconifg tool in managed mode. And the tool will display "Tx Power off"
when disabled=1.

Now, in managed mode, iwconfig will not show "TX Power" if the radio is not
switched off. It will only display "Tx Power off" only if the radio is killed.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ipw2100: Fix a gcc compile warning
Zhu Yi [Tue, 24 Jan 2006 05:49:26 +0000 (13:49 +0800)]
[PATCH] ipw2100: Fix a gcc compile warning

drivers/net/wireless/ipw2100.c:2236: warning: `ipw2100_match_buf' defined
but not used

Cc: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[LIBATA] Blacklist certain Maxtor firmware revisions for FUA support
Jens Axboe [Mon, 30 Jan 2006 15:09:35 +0000 (16:09 +0100)]
[LIBATA] Blacklist certain Maxtor firmware revisions for FUA support

It looks like they are either discarding or corrupting data when the FUA
command is used, bad.

Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[SPARC64]: Kill compat_sys_clock_settime sign extension stub.
David S. Miller [Mon, 30 Jan 2006 09:31:09 +0000 (01:31 -0800)]
[SPARC64]: Kill compat_sys_clock_settime sign extension stub.

It's wrong and totally unneeded.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCSI] megaraid_sas: new template defined to represent each type of controllers
Sumant Patro [Wed, 25 Jan 2006 20:02:40 +0000 (12:02 -0800)]
[SCSI] megaraid_sas: new template defined to represent each type of controllers

This patch defines a new template to represent each type of
controllers (identified by the processor used). The template has
members that is set with appropriate values during driver
initialisation. This change is done to support new controllers with
minimal change to existing code. In future, for a new controller
support, a template will be declared and its members initialised
appropriately.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] megaraid_sas: cleanup queue command path
Sumant Patro [Wed, 25 Jan 2006 19:53:25 +0000 (11:53 -0800)]
[SCSI] megaraid_sas: cleanup queue command path

This patch (originally submitted by Christoph Hellwig) removes code
duplication in megasas_build_cmd.  It also defines
MEGASAS_IOC_FIRMWARE32 to allow 64 bit compiled applications to work.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Sat, 28 Jan 2006 21:06:30 +0000 (16:06 -0500)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

16 years ago[ARM] 3289/1: Enable the LCD support for Integrator/CP
Catalin Marinas [Sat, 28 Jan 2006 20:54:50 +0000 (20:54 +0000)]
[ARM] 3289/1: Enable the LCD support for Integrator/CP

Patch from Catalin Marinas

The LCD displays were no longer working with Integrator/CP after some
changes to the setup code. This patch re-enables them.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[PATCH] ieee80211: Fix A band min and max channel definitions
Zhu Yi [Thu, 19 Jan 2006 08:21:19 +0000 (16:21 +0800)]
[PATCH] ieee80211: Fix A band min and max channel definitions

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ieee80211: Fix iwlist scan can only show about 20 APs
Zhu Yi [Thu, 19 Jan 2006 08:20:59 +0000 (16:20 +0800)]
[PATCH] ieee80211: Fix iwlist scan can only show about 20 APs

Limit the amount of output given to iwlist scan.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] ieee80211: Fix problem with not decrypting broadcast packets
Zhu Yi [Thu, 19 Jan 2006 08:20:42 +0000 (16:20 +0800)]
[PATCH] ieee80211: Fix problem with not decrypting broadcast packets

The code for pulling the key to use for decrypt was correctly using
the host_mc_decrypt flag.  The code that actually decrypted,
however, was based on host_decrypt.  This patch changes this
behavior.

Signed-off-by: Etay Bogner <etay.bogner@gmail.com>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] orinoco_cs: tweak Vcc debugging messages
Valdis.Kletnieks@vt.edu [Thu, 19 Jan 2006 07:07:47 +0000 (02:07 -0500)]
[PATCH] orinoco_cs: tweak Vcc debugging messages

The current orinoco_cs.c can issue the exact same error message for
2 different tests that can fail.  Alter them so we can tell which
one of the two failed.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[PATCH] mv643xx_eth: Fix for building as a module
Dale Farnsworth [Fri, 27 Jan 2006 08:05:51 +0000 (01:05 -0700)]
[PATCH] mv643xx_eth: Fix for building as a module

Enable mv643xx_eth driver to work when built as a module on
mv64x60-based embedded systems.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] mv643xx_eth: Whitespace cleanup
Dale Farnsworth [Fri, 27 Jan 2006 08:04:43 +0000 (01:04 -0700)]
[PATCH] mv643xx_eth: Whitespace cleanup

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] mv643xx_eth: Update dev->last_rx on packet receive
Paolo Galtieri [Fri, 27 Jan 2006 08:03:38 +0000 (01:03 -0700)]
[PATCH] mv643xx_eth: Update dev->last_rx on packet receive

Update dev->last_rx on packet receive

This fix corrects errors seen during configuration of the bonding driver.

Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] mv643xx_eth: Fix spinlock recursion bug
Dale Farnsworth [Fri, 27 Jan 2006 08:02:05 +0000 (01:02 -0700)]
[PATCH] mv643xx_eth: Fix spinlock recursion bug

This patch eliminates a spinlock recursion bug introduced recently.
Since eth_port_send() is always called with the lock held, we simply
remove the locking inside the function itself.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] s2io: scatter-gather fix
Ananda Raju [Thu, 19 Jan 2006 19:11:54 +0000 (14:11 -0500)]
[PATCH] s2io: scatter-gather fix

There is a problem with fragmented skb in s2io driver version 2.0.9.4
available in 2.6.16-rc1 kernel. The adapter will fail to transmit if
any scatter-gather skb arrives.  This patch provides fix for the above
described problem.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] b44: fix laptop carrier detect
Stephen Hemminger [Sat, 21 Jan 2006 05:13:17 +0000 (21:13 -0800)]
[PATCH] b44: fix laptop carrier detect

On my laptop, the b44 device is created and the carrier state defaults
to ON when created by alloc_etherdev. This means tools like NetworkManager
see the carrier as On and try and bring the device up.  The correct thing
to do is mark the carrier as Off when device is created.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] acenic: fix checking of read_eeprom_byte() return values
Eric Sesterhenn [Fri, 20 Jan 2006 20:32:56 +0000 (23:32 +0300)]
[PATCH] acenic: fix checking of read_eeprom_byte() return values

tmp in ace_init is u32 thus rendering read_eeprom_byte() return values
checks useless.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[PATCH] bonding: fix ->get_settings error checking
Eric Sesterhenn [Fri, 20 Jan 2006 20:30:01 +0000 (23:30 +0300)]
[PATCH] bonding: fix ->get_settings error checking

Since get_settings() returns a signed int and it gets checked
for < 0 to catch an error, res should be a signed int too.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
16 years ago[SCSI] Prevent scsi_execute_async from guessing cdb length
brking@us.ibm.com [Mon, 23 Jan 2006 21:03:22 +0000 (15:03 -0600)]
[SCSI] Prevent scsi_execute_async from guessing cdb length

When the scsi_execute_async interface was added it ended up reducing
the flexibility of userspace to send arbitrary scsi commands through
sg using SG_IO. The SG_IO interface allows userspace to specify the
CDB length. This is now ignored in scsi_execute_async and it is
guessed using the COMMAND_SIZE macro, which is not always correct,
particularly for vendor specific commands. This patch adds a cmd_len
parameter to the scsi_execute_async interface to allow the caller
to specify the length of the CDB.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[ARM] 3269/1: Add ARMv6 MT_NONSHARED_DEVICE mem_types[] index
George G. Davis [Thu, 26 Jan 2006 15:21:28 +0000 (15:21 +0000)]
[ARM] 3269/1: Add ARMv6 MT_NONSHARED_DEVICE mem_types[] index

Patch from George G. Davis

This Freescale Semiconductor, Inc. contributed patch adds mem_types[]
support for ARMv6 non-shared device memory region attributes. This
implementation provides support for only first level section mapped
non-shared devices. Second level non-shared device mappings are not
yet supported.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 3266/1: S3C2400 - adds macro S3C24XX
Lucas Correia Villa Real [Thu, 26 Jan 2006 15:20:50 +0000 (15:20 +0000)]
[ARM] 3266/1: S3C2400 - adds macro S3C24XX

Patch from Lucas Correia Villa Real

This patch defines S3C2400 memory map and adds a S3C24XX macro for
common resources between S3C2400, S3C2410 and S3C2440 cpus.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp
Russell King [Thu, 26 Jan 2006 14:12:06 +0000 (14:12 +0000)]
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp

Some folk want to use RGB555 rather tahn RGB565 with amba-clcd.
Allow amba-clcd to accept either pixel format.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[SCSI] ips soft lockup during reset/initialization
Jack Hammer [Tue, 24 Jan 2006 19:43:41 +0000 (14:43 -0500)]
[SCSI] ips soft lockup during reset/initialization

Resetting the adapter causes the ServeRAID driver to exceed
the max time allowed by the softlock watchdog. Resetting the
hardware can easily require 30 or more seconds. To avoid the

    "BUG: soft lockup detected on CPU#0!"

result, this patch replaces the mdelay() calls in the
initialization/reset routines with msleep().

Signed-off-by: Jack Hammer <jack_hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] qla2xxx: Drop legacy 'bypass lun scan for tape device' code.
andrew.vasquez@qlogic.com [Fri, 20 Jan 2006 22:53:25 +0000 (14:53 -0800)]
[SCSI] qla2xxx: Drop legacy 'bypass lun scan for tape device' code.

Internal lun discovery has been removed since fc_transport
integration.  Short-circuiting for tape-devices in
qla2x00_update_fcport() could inadvertently result in a
blocked rport timing-out and its targets being reaped.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] qla2xxx: Correct issue where the rport's upcall was not being made after relogin.
andrew.vasquez@qlogic.com [Fri, 20 Jan 2006 22:53:19 +0000 (14:53 -0800)]
[SCSI] qla2xxx: Correct issue where the rport's upcall was not being made after relogin.

A target can LOGO an initiator at any time (i.e. during I/O,
due to a controller hicup, or as a simple authentication
mechanism after an initial CDB command), when this occurs,
the driver attempts to relogin (PLOGI) to the device via the
DPC thread.  Add code to make the appropriate upcall to the
FC transport layer (fc_remote_port_add()) upon successful
completion of the PLOGI.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] qla2xxx: Correct synchronization issues during rport addition/deletion.
andrew.vasquez@qlogic.com [Fri, 20 Jan 2006 22:53:13 +0000 (14:53 -0800)]
[SCSI] qla2xxx: Correct synchronization issues during rport addition/deletion.

The driver can typically detect port-loss during an
interrupt context (i.e. via interrogation of a status IOCB's
completion status [CS_PORT_LOGGED_OUT].  Due to the calling
requirements of the fc_rport APIs, the driver would defer
removal of the device to the default workqueue.  If the
work-item was preceded by an event which caused the port to
obtain visibility (relogin successful, target re-logged into
the topology), deferred removal could inadvertently drop the
rport.  The code also no longer defers removal via the
default workqueue, instead opting for use of the driver's
own DPC thread.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] dc395x: "fix" virt_addr calculation on AUTO_REQSENSE
Guennadi Liakhovetski [Fri, 20 Jan 2006 00:05:00 +0000 (01:05 +0100)]
[SCSI] dc395x: "fix" virt_addr calculation on AUTO_REQSENSE

The patch below "fixes" calculation of the virt_addr for the AUTO_REQSENSE
case. I put "fixes" in quotes because the real fix would be to completely
remove it, but that's beyond the scope of this patch.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] ibmvscsi: handle re-enable firmware message
Dave C Boutcher [Thu, 19 Jan 2006 19:34:44 +0000 (13:34 -0600)]
[SCSI] ibmvscsi: handle re-enable firmware message

New versions of the Power5 firmware can send a "re-enable" message to
the virtual scsi adapter.  This fix makes us handle the message
correctly.  Without it, the driver goes catatonic and the system crashes
unpleasantly.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] qla1280: remove < 2.6.0 support
Jes Sorensen [Mon, 16 Jan 2006 16:49:29 +0000 (11:49 -0500)]
[SCSI] qla1280: remove < 2.6.0 support

Remove support for kernels older than 2.6.0.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
16 years ago[SCSI] Remove host template ordered_flush variable
Tetsuo Takata [Wed, 25 Jan 2006 10:12:40 +0000 (11:12 +0100)]
[SCSI] Remove host template ordered_flush variable

After the recent overhaul of the block layer the variable
"ordered_flush" is no longer used.

Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[IPV6] MLDv2: fix change records when transitioning to/from inactive
David L Stevens [Tue, 24 Jan 2006 21:06:39 +0000 (13:06 -0800)]
[IPV6] MLDv2: fix change records when transitioning to/from inactive

The following patch fixes these problems in MLDv2:

1) Add/remove "delete" records for sending change reports when
        addition of a filter results in that filter transitioning to/from
        inactive. [same as recent IPv4 IGMPv3 fix]
2) Remove 2 redundant "group_type" checks (can't be IPV6_ADDR_ANY
        within that loop, so checks are always true)
3) change an is_in() "return 0" to "return type == MLD2_MODE_IS_INCLUDE".
        It should always be "0" to get here, but it improves code locality
        to not assume it, and if some race allowed otherwise, doing
        the check would return the correct result.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[AF_KEY]: no message type set
Jerome Borsboom [Tue, 24 Jan 2006 20:57:19 +0000 (12:57 -0800)]
[AF_KEY]: no message type set

When returning a message to userspace in reply to a SADB_FLUSH or
SADB_X_SPDFLUSH message, the type was not set for the returned PFKEY
message. The patch below corrects this problem.

Signed-off-by: Jerome Borsboom <j.borsboom@erasmusmc.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BONDING]: Remove CAP_NET_ADMIN requirement for INFOQUERY ioctl
Thomas Graf [Tue, 24 Jan 2006 20:46:33 +0000 (12:46 -0800)]
[BONDING]: Remove CAP_NET_ADMIN requirement for INFOQUERY ioctl

This information is already available via /proc/net/bonding/*
therefore it doesn't make sense to require CAP_NET_ADMIN
privileges.

Original patch by Laurent Deniel <laurent.deniel@free.fr>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BLOCK] ll_rw_blk: fix setting of ->ordered on init
Tetsuo Takata [Tue, 24 Jan 2006 09:34:36 +0000 (10:34 +0100)]
[BLOCK] ll_rw_blk: fix setting of ->ordered on init

This makes XFS barrier mounts succeed on my SCSI system.

Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[BLOCK] elevator: allow default scheduler to potentially be modular
Nate Diller [Tue, 24 Jan 2006 09:09:14 +0000 (10:09 +0100)]
[BLOCK] elevator: allow default scheduler to potentially be modular

Jens has decided that allowing the default scheduler to be a module is
a bug, and should not be allowed under kconfig.  However, I find that
scenario useful for debugging, and wish for the kernel to be able to
handle this situation without OOPSing, if I enable such an option in
the .config directly.  This patch dynamically checks for the presence
of the compiled-in default, and falls back to no-op, emitting a
suitable error message, when the default is not available

Tested for a range of boot options on 2.6.16-rc1-mm2.

Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[BLOCK] elevator: default choice selection
Nate Diller [Tue, 24 Jan 2006 09:07:58 +0000 (10:07 +0100)]
[BLOCK] elevator: default choice selection

My previous default iosched patch did a poor job dealing with the
'elevator=' boot-time option.  The old behavior falls back to the
compiled-in default if the requested one is not registered at boot
time.  This patch dynamically evaluates which default
to use, and emits a suitable error message when the requested scheduler
is not available.  It also does the 'as' -> 'anticipatory' conversion
before elevator registration, which along with a modified registration
function, allows it to correctly indicate which default scheduler is
in use.

Tested for a range of boot options on 2.6.16-rc1-mm2.

Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[BLOCK] ll_rw_blk: use preempt-disabling disk_stat_add() in completion
Jens Axboe [Tue, 17 Jan 2006 10:09:27 +0000 (11:09 +0100)]
[BLOCK] ll_rw_blk: use preempt-disabling disk_stat_add() in completion

It can legally be called with interrupts/preemption enabled.

Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[BLOCK] ll_rw_blk: make max_sectors and max_hw_sectors unsigned ints
Jens Axboe [Tue, 17 Jan 2006 08:04:32 +0000 (09:04 +0100)]
[BLOCK] ll_rw_blk: make max_sectors and max_hw_sectors unsigned ints

IDE lba48 can support full 64k request size, which overflows the
max_hw_sectors variable.

Signed-off-by: Jens Axboe <axboe@suse.de>
16 years ago[SPARC64]: Implement __raw_read_trylock()
David S. Miller [Tue, 24 Jan 2006 05:03:56 +0000 (21:03 -0800)]
[SPARC64]: Implement __raw_read_trylock()

generic__raw_read_trylock() just does a raw_read_lock() so that
isn't very useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Fix skb fclone error path handling.
Herbert Xu [Tue, 24 Jan 2006 00:32:45 +0000 (16:32 -0800)]
[NET]: Fix skb fclone error path handling.

On the error path if we allocated an fclone then we will free it in
the wrong pool.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SUNGEM]: Make PM of PHYs more reliable (#2)
Benjamin Herrenschmidt [Tue, 24 Jan 2006 00:30:04 +0000 (16:30 -0800)]
[SUNGEM]: Make PM of PHYs more reliable (#2)

On my latest laptop, I've had occasional PHY dead on wakeup from
sleep... the PHY would be totally unresponsive even to toggling the hard
reset line until the machine is powered down... Looking closely at the
code, I found some possible issues in the way we setup the MDIO lines
during suspend along with slight divergences from what Darwin does when
resetting it that may explain the problem. That patch change these and
the problem appear to be gone for me at least... I also fixed an mdelay
-> msleep while I was at it to the pmac feature code that is called
when toggling the PHY reset line since sungem doesn't call it in an
atomic context anymore.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>b
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Fix some whitespace issues in af_packet.c
Kris Katterjohn [Tue, 24 Jan 2006 00:28:02 +0000 (16:28 -0800)]
[NET]: Fix some whitespace issues in af_packet.c

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: more whitespace issues in net/core/filter.c
Kris Katterjohn [Tue, 24 Jan 2006 00:26:16 +0000 (16:26 -0800)]
[NET]: more whitespace issues in net/core/filter.c

This fixes some whitespace issues in net/core/filter.c

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SERIAL] 8250 Documentation fix
Timothy Charles McGrath [Mon, 23 Jan 2006 09:50:09 +0000 (09:50 +0000)]
[SERIAL] 8250 Documentation fix

This fixes the documentation error for 'SERIAL_8250' in
drivers/serial/Kconfig

Signed-off-by: Timothy Charles McGrath <tmHikaru@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[SPARC]: Increase NR_SYSCALLS to 299
David S. Miller [Sun, 22 Jan 2006 20:12:01 +0000 (12:12 -0800)]
[SPARC]: Increase NR_SYSCALLS to 299

To let new syscalls through.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SERIAL] Make uart_port flags a bitwise type
Russell King [Sat, 21 Jan 2006 23:03:28 +0000 (23:03 +0000)]
[SERIAL] Make uart_port flags a bitwise type

Same reasoning as commit 747c8a55946ed037bf7d62454c3c599c02af2262
but this time we're making uart_port flags a bitwise type - not
all of these flags correspond with the old ASYNC_ flags, so there
is the possibility for bugs if the wrong ASYNC_* constants are
used.  Always use UPF_* constants for uart_port->flags.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[SERIAL] Fix UPF_ flag usage with uart_info->flags
Russell King [Sat, 21 Jan 2006 22:54:06 +0000 (22:54 +0000)]
[SERIAL] Fix UPF_ flag usage with uart_info->flags

The previous change found a bug in the serial SAK handling - because
we were looking for UPF_SAK set in uart_info->flags, we would never
raise a SAK condition.  UPF_SAK is in uart_port->flags.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>