linux-2.6.git
13 years agoUSB: auerswald: Convert stats_sem in a mutex
matthias@kaehlcke.net [Mon, 18 Feb 2008 19:45:34 +0000 (20:45 +0100)]
USB: auerswald: Convert stats_sem in a mutex

The semaphore cp->mutex is used as mutex, convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Wolfgang Mües <wolfgang@iksw-muees.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: cypress_m8: Limit baud rate to <=4800 for USB low speed devices
Mike Isely [Mon, 11 Feb 2008 02:23:32 +0000 (20:23 -0600)]
USB: cypress_m8: Limit baud rate to <=4800 for USB low speed devices

The cypress app note for the M8 states that for the USB low speed
version of the part, throughput is effectively limited to 800
bytes/sec.  So if we were to try a faster baud rate in such cases then
we risk overrun errors on receive.  Best to just identify this case
and limit the rate to 4800 baud or less (by ignoring any request to
set a faster rate).  The old baud rate setting code was somewhat
fragile; this change also hopefully makes it easier in the future to
better checking / limiting.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: cypress_m8: Get rid of pointless NULL check
Mike Isely [Mon, 11 Feb 2008 02:23:28 +0000 (20:23 -0600)]
USB: cypress_m8: Get rid of pointless NULL check

Remove a NULL check in cypress_m8; the check is useless in this
context because it is referenced earlier in the same code path thus
the kernel would be oops'ed before reaching this point anyway.  (And
it's really pointless here anyway; if this pointer somehow is NULL the
driver is going to have serious problems in many other places.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: cypress_m8: Don't issue GET_CONFIG for certain devices
Mike Isely [Mon, 11 Feb 2008 02:23:24 +0000 (20:23 -0600)]
USB: cypress_m8: Don't issue GET_CONFIG for certain devices

Earthmate LT-20 devices (both "old" and "new" versions) can't tolerate
a GET_CONFIG command.  The original Earthmate has no trouble with
this.  Presumably other non-Earthmate devices are still OK as well.
This change disables the use of GET_CONFIG for cases where it is known
not to work.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: cypress_m8: Packet format is separate from characteristic size
Mike Isely [Mon, 11 Feb 2008 02:23:19 +0000 (20:23 -0600)]
USB: cypress_m8: Packet format is separate from characteristic size

cypress_m8: Packet format is separate from characteristic size

The Cypress app note states that when using an 8 byte packet buffer
size that the packet format is modified (to be more compact).  However
I have since discovered that newer DeLorme Earthmate LT-20 devices
(those that are low speed USB with 8 byte packet size) STILL use the
format that is really supposed to correspond to 32 byte packets.
Further confusing things is the subsequent discovery that there are
actually two different types of LT-20 - older LT-20's use 32 byte
packets which is probably why this issue wasn't originally
encountered.  The solution here is to flag the packet format
separately from the buffer size.  Then at initialization time,
identify the correct combination and set it up.  This is a critical
fix for anyone with a newer LT-20.  Older devices and non-Earthmate
devices should remain unaffected by this change.  (If other devices
behave in this, uh, unexpected manner, it's now just a simple 1 line
change to fix them as well (change the pkt_fmt member for that
device).  Default behavior with this patch is still to drive the
format as per the app-note; of course for Earthmate devices this is
overridden.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: cypress_m8: Feature buffer fixes
Mike Isely [Mon, 11 Feb 2008 02:23:14 +0000 (20:23 -0600)]
USB: cypress_m8: Feature buffer fixes

cypress_m8: Feature buffer fixes

From: Mike Isely <isely@pobox.com>

Don't hardcode the feature buffer size; use sizeof() instead.  That
way we can easily specify the size in a single spot.  Speaking of the
feature buffer size, the Cypress app note (and further testing with a
DeLorme Earthmate) suggests that this size should be 5 not 8 bytes.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: io_ti.c: remove pointless eye-candy in debug statements
Andrew Morton [Tue, 5 Feb 2008 07:57:50 +0000 (23:57 -0800)]
USB: io_ti.c: remove pointless eye-candy in debug statements

These strings always come up as false positives whenever I'm doing
git-conflict fixups (ie: about 1000 times/day).

I don't think the zillion "<" and ">" characters are very useful and removing
them makes my life that little bit easier.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: gadget: Hangup tty on g_serial disconnect
Savin Zlobec [Fri, 15 Feb 2008 12:42:01 +0000 (13:42 +0100)]
USB: gadget: Hangup tty on g_serial disconnect

On USB cable disconnect g_serial doesn't hangup the port tty,
which results in an endless read on the tty device. With the
following patch the read and select behave correctly when
the cable is unplugged.

Tested on at91rm9200

Signed-off-by: Savin Zlobec <savin@epiko.si>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: EHCI: Refactor "if (handshake()) state = HC_STATE_HALT"
Karsten Wiese [Sat, 16 Feb 2008 21:44:42 +0000 (13:44 -0800)]
USB: EHCI: Refactor "if (handshake()) state = HC_STATE_HALT"

Refactor the EHCI "if (handshake()) state = HC_STATE_HALT" idiom,
which appears 4 times, by replacing it with calls to a new function
called handshake_on_error_set_halt().  Saves a few bytes too.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: m66592-udc: reduce size of data structure.
Paul Mundt [Wed, 13 Feb 2008 08:02:33 +0000 (17:02 +0900)]
USB: m66592-udc: reduce size of data structure.

Poking around with pahole, we see that m66592 handily shoves a u16 in
between larger types on 2 separate occasions leaving us with 2 2-byte
holes:

struct m66592 {
...

/* size: 1196, cachelines: 38 */
/* sum members: 1192, holes: 2, sum holes: 4 */
/* last cacheline: 12 bytes */
}; /* definitions: 1 */

Pairing them gets back 4-bytes:

struct m66592 {
...

/* size: 1192, cachelines: 38 */
/* last cacheline: 8 bytes */
}; /* definitions: 1 */

Unfortunately it's not enough to save a cacheline with this massive
structure, but every byte helps.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: ehci minor SOC bus glue fixes
David Brownell [Tue, 12 Feb 2008 02:40:46 +0000 (18:40 -0800)]
USB: ehci minor SOC bus glue fixes

Various minor fixes to some SOC bus glue for EHCI:

 - Remove a bogus copyright (by "me"!) which someone added to the FSL
   driver, and an irrelevant comment.

 - Un-break MODULE_ALIAS() directives after platform_bus hotplugging
   acquired a backwards-incompatible change.  (Which didn't fix ANY
   of the in-tree drivers it prevented from hotplugging -- sigh.)

 - Remove some bogus assignments of platform_bus_type; that's done by
   the platform_bus code.

 - Add some FIXMEs for drivers with that pointless two-level idiom for
   probe() and remove() routines.  ("Obfuscation" is a non-goal.)
   That should help avoid future bus glue which copies that idiom.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: ehci tolerates some buggy devices
David Brownell [Fri, 8 Feb 2008 23:08:44 +0000 (15:08 -0800)]
USB: ehci tolerates some buggy devices

This teaches EHCI how to to work around bugs in certain high speed
devices, by accomodating "bulk" packets that exceed the 512 byte
constant value required by the USB 2.0 specification.  (Have a
look at section 5.8.3, paragraphs 1 and 3.)

It also makes the descriptor parsing code warn when it encounters
such bugs.  (We've had reports of maybe two or three such devices,
all pretty recent.)

Such devices are nonconformant.  The proper fix is have the vendors
of those devices do the simple, obvious, and correct thing ... which
will let them be used with USB hosts that don't have workarounds for
this particular vendor bug.  But unless/until they do, we can at least
have one of the high speed HCDs work with such buggy devices.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: ohci: port reset paranoia timeout
David Brownell [Sat, 2 Feb 2008 10:42:52 +0000 (02:42 -0800)]
USB: ohci: port reset paranoia timeout

This limits how long the OHCI port reset loop waits for the hardware
to do its job, if the controller either (a) dies, or (b) can't finish
the reset.  Such limits are always a good idea.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: ehci: minor cleanups
David Brownell [Fri, 1 Feb 2008 19:42:05 +0000 (11:42 -0800)]
USB: ehci: minor cleanups

Minor cleanups to the EHCI code:  revision history is what source
code repositories should have.  Switch to a more standard way to
kick in verbose debugging -- don't be EHCI-specific.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: defines for USB "Link Power Management" (LPM) ECN
David Brownell [Sun, 10 Feb 2008 20:24:00 +0000 (12:24 -0800)]
USB: defines for USB "Link Power Management" (LPM) ECN

There's a new PM-related change notice for the USB 2.0 specification
called "Link Power Management" (LPM).  It defines a new "L1 Suspend"
state which resembles the current (L2) suspend state, except that it
can be entered and exited much more quickly.  It should thus be more
useful for runtime PM, even though it doesn't mandate reduced power
draw from VBUS.

This patch provides the relevant #defines for usbcore.  Actually
implementing these mechanisms requires host silicon that can generate
new USB packets, plus hubs handling some new requests and peripherals
which understand the new packets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: usbatm: convert heavy init dances to kthread API
Pavel Emelyanov [Mon, 11 Feb 2008 12:26:09 +0000 (15:26 +0300)]
USB: usbatm: convert heavy init dances to kthread API

This is an attempt to kill two birds with one stone.

First, we kill one more user of kernel_thread, which is scheduled
for removal. Second - we kill one of the last users of kill_proc -
the function which is also to be removed, because it uses a pid_t
which is not safe now.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: usb-ohci-sm501-driver: use the conventional convention for suspend and resume
Andrew Morton [Tue, 5 Feb 2008 07:57:48 +0000 (23:57 -0800)]
USB: usb-ohci-sm501-driver: use the conventional convention for suspend and resume

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: make USB_STORAGE_ONETOUCH available with PM
Adrian Bunk [Tue, 5 Feb 2008 07:57:45 +0000 (23:57 -0800)]
USB: make USB_STORAGE_ONETOUCH available with PM

As Torsten Kaiser pointed out, it seems the dependency of
USB_STORAGE_ONETOUCH on !PM should have been removed in commit
7931e1c6f8007d5fef8a0bb2dc71bd97315eeae9.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: libusual: locking cleanup
Daniel Walker [Tue, 5 Feb 2008 07:57:42 +0000 (23:57 -0800)]
USB: libusual: locking cleanup

I converted the usu_init_notify semaphore to normal mutex usage, and it
should still prevent the request_module before the init routine is
complete.  Before it acted more like a complete, now the mutex protects two
distinct section from running at the same time.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: microtek: remove unused semaphore
Daniel Walker [Tue, 5 Feb 2008 07:57:42 +0000 (23:57 -0800)]
USB: microtek: remove unused semaphore

No current references, so removing it.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: convert usb.h struct usb_device to kernel-doc
Randy Dunlap [Thu, 14 Feb 2008 02:33:15 +0000 (18:33 -0800)]
USB: convert usb.h struct usb_device to kernel-doc

Convert struct usb_device to use kernel-doc notation.
Please especially check the @filelist and @usb_classdev descriptions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: add USB_DT_CS_RADIO_CONTROL define to ch9.h
Greg Kroah-Hartman [Tue, 8 Apr 2008 20:24:46 +0000 (13:24 -0700)]
USB: add USB_DT_CS_RADIO_CONTROL define to ch9.h

This is needed by the wireless usb developers, and is part of the USB spec.

Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agocheckpatch: usb_free_urb() can take NULL
Greg Kroah-Hartman [Mon, 14 Apr 2008 21:17:29 +0000 (14:17 -0700)]
checkpatch: usb_free_urb() can take NULL

usb_free_urb() can take a NULL, so let's check and warn about that.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: enable USB-PERSIST by default
Alan Stern [Thu, 6 Mar 2008 16:04:13 +0000 (11:04 -0500)]
USB: enable USB-PERSIST by default

This patch (as1052) enables USB-PERSIST for all devices by default.
The user won't have to remember to enable it explicitly for devices
containing mounted filesystems.

Eventually userspace tools like hal may be able to set the persist
attribute automatically when a filesystem is mounted on a USB device.
When that time comes this patch can be reverted, if people think it
matters.

This approach has the advantage of giving the user the ability to turn
off USB-PERSIST for devices with mounted filesystems, rather than
making the kernel always assume it should be on.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: check serial-number string after device reset
Alan Stern [Mon, 3 Mar 2008 20:16:04 +0000 (15:16 -0500)]
USB: check serial-number string after device reset

This patch (as1048) extends the descriptor checking after a device is
reset.  Now the SerialNumber string descriptor is compared to its old
value, in addition to the device and configuration descriptors.

As a consequence, the kmalloc() call in usb_string() is now on the
error-handling pathway for usb-storage.  Hence its allocation type is
changed to GFO_NOIO.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: remove CONFIG_USB_PERSIST setting
Alan Stern [Mon, 3 Mar 2008 20:15:59 +0000 (15:15 -0500)]
USB: remove CONFIG_USB_PERSIST setting

This patch (as1047) removes the USB_PERSIST Kconfig option, enabling
it permanently.  It also prevents the power/persist attribute from
being created for hub devices; there's no point in having it since
USB-PERSIST is always turned on for hubs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: make USB-PERSIST work after every system sleep
Alan Stern [Mon, 3 Mar 2008 20:15:51 +0000 (15:15 -0500)]
USB: make USB-PERSIST work after every system sleep

This patch (as1046) makes USB-PERSIST work more in accordance with
the documentation.  Currently it takes effect only in cases where the
root hub has lost power or been reset, but it is supposed to operate
whenever a power session was dropped during a system sleep.

A new hub_restart() routine carries out the duties required during a
reset or a reset-resume.  It checks to see whether occupied ports are
still enabled, and if they aren't then it clears the enable-change and
connect-change features (to prevent interference by khubd) and sets
the child device's reset_resume flag.  It also checks ports that are
supposed to be unoccupied to verify that the firmware hasn't left the
port in an enabled state.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: reorganize code in hub.c
Alan Stern [Mon, 3 Mar 2008 20:15:43 +0000 (15:15 -0500)]
USB: reorganize code in hub.c

This patch (as1045) reorganizes some code in the hub driver.
hub_port_status() is moved earlier in the file, and a new hub_stop()
routine is created to do the work currently in hub_preset() (i.e.,
disconnect all child devices and quiesce the hub).

There are no functional changes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: EHCI: carry out port handover during each root-hub resume
Alan Stern [Mon, 3 Mar 2008 20:15:36 +0000 (15:15 -0500)]
USB: EHCI: carry out port handover during each root-hub resume

This patch (as1044) causes EHCI port handover for non-high-speed
devices to occur during every root-hub resume, not just in cases where
the controller lost power or was reset.  This is necessary because:

When some machines go into suspend, they remove power from
on-board USB devices while retaining suspend current for USB
controllers.

The user might well unplug a USB device while the system is
suspended and then plug it back in before resuming.

A corresponding change is made to the core resume routine; now
high-speed root hubs will always be resumed when the system wakes up,
even if they were suspended before the system went to sleep.  If this
weren't done then EHCI port handover wouldn't work, since it is called
when the EHCI root hub is resumed.

Finally, a comment is added to the hub driver explaining the khubd has
to be freezable; if it weren't frozen then it could interfere with
port handover.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Add HP hs2300 Broadband Wireless Module to sierra.c
Stefan Seyfried [Thu, 17 Apr 2008 05:47:34 +0000 (07:47 +0200)]
USB: Add HP hs2300 Broadband Wireless Module to sierra.c

Add the HP hs2300 Broadband Wireless Module (relabeled MC8775) USB IDs

Signed-off-by: Stefan Seyfried <seife@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: Fix memory leak in mon_stat_release
Ming Lei [Mon, 14 Apr 2008 13:27:00 +0000 (21:27 +0800)]
USB: Fix memory leak in mon_stat_release

Fix the leak of the snap structure allocated in mon_stat_open().

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoUSB: CP2101 Add new device IDs
Craig Shelley [Sat, 12 Apr 2008 15:15:54 +0000 (16:15 +0100)]
USB: CP2101 Add new device IDs

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux...
Linus Torvalds [Thu, 24 Apr 2008 21:41:20 +0000 (14:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/x86/linux-2.6-x86-fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  "make namespacecheck" fixes
  x86: fix compilation error in VisWS
  x86: voyager fix
  x86: Drop duplicate from setup.c
  intel-iommu.c: dma ops fix

13 years ago"make namespacecheck" fixes
Ingo Molnar [Wed, 23 Apr 2008 11:20:56 +0000 (13:20 +0200)]
"make namespacecheck" fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: fix compilation error in VisWS
Alexey Starikovskiy [Mon, 21 Apr 2008 09:32:01 +0000 (13:32 +0400)]
x86: fix compilation error in VisWS

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: voyager fix
Ingo Molnar [Mon, 21 Apr 2008 11:39:53 +0000 (13:39 +0200)]
x86: voyager fix

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: Drop duplicate from setup.c
Alexey Starikovskiy [Mon, 21 Apr 2008 09:31:55 +0000 (13:31 +0400)]
x86: Drop duplicate from setup.c

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agointel-iommu.c: dma ops fix
Ingo Molnar [Tue, 22 Apr 2008 09:09:04 +0000 (11:09 +0200)]
intel-iommu.c: dma ops fix

Stephen Rothwell noticed that:

Commit 2be621498d461b63ca6124f86e3b9582e1a8e722 ("x86: dma-ops on highmem
fix") in Linus' tree introduced a new warning (noticed in the x86_64
allmodconfig build of linux-next):

drivers/pci/intel-iommu.c:2240: warning: initialization from incompatible pointer type

Which points at an instance of map_single that needs updating.

Fix it to the new prototype.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Thu, 24 Apr 2008 20:47:31 +0000 (13:47 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix typo in previous commit
  [CIFS] Fix define for new proxy cap to match documentation
  [CIFS] Fix UNC path prefix on QueryUnixPathInfo to have correct slash
  [CIFS] Reserve new proxy cap for WAFS
  [CIFS] Add various missing flags and defintions
  [CIFS] make cifs_dfs_automount_list_static
  [CIFS] Fix oops when slow oplock process races with unmount
  [CIFS] Fix acl length when very short ACL being modified by chmod
  [CIFS] Fix looping on reconnect to Samba when unexpected tree connect fail on reconnect
  [CIFS] minor update to change log

13 years agoRxRPC: Fix a regression in the RXKAD security module
David Howells [Thu, 24 Apr 2008 19:38:56 +0000 (20:38 +0100)]
RxRPC: Fix a regression in the RXKAD security module

Fix a regression in the RXKAD security module introduced in:

commit 91e916cffec7c0153c5cbaa447151862a7a9a047
Author: Al Viro <viro@ftp.linux.org.uk>
Date:   Sat Mar 29 03:08:38 2008 +0000

net/rxrpc trivial annotations

A variable was declared as a 16-bit type rather than a 32-bit type.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-with-apologies-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoRemove -numa from EXTRAVERSION
Sebastian Siewior [Thu, 24 Apr 2008 19:32:28 +0000 (21:32 +0200)]
Remove -numa from EXTRAVERSION

This snuck in through 919ee677b656c52c5f86d3d916786891220d5452
("[SPARC64]: Add NUMA support")

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Thu, 24 Apr 2008 18:46:16 +0000 (11:46 -0700)]
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits)
  SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request
  make nfs_automount_list static
  NFS: remove duplicate flags assignment from nfs_validate_mount_data
  NFS - fix potential NULL pointer dereference v2
  SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use
  SUNRPC: Fix a race in gss_refresh_upcall()
  SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests
  SUNRPC: Remove the unused export of xprt_force_disconnect
  SUNRPC: remove XS_SENDMSG_RETRY
  SUNRPC: Protect creds against early garbage collection
  NFSv4: Attempt to use machine credentials in SETCLIENTID calls
  NFSv4: Reintroduce machine creds
  NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
  nfs: fix printout of multiword bitfields
  nfs: return negative error value from nfs{,4}_stat_to_errno
  NLM/lockd: Ensure client locking calls use correct credentials
  NFS: Remove the buggy lock-if-signalled case from do_setlk()
  NLM/lockd: Fix a race when cancelling a blocking lock
  NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call
  NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel
  ...

13 years agoMerge branch 'for-linus' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 24 Apr 2008 18:45:00 +0000 (11:45 -0700)]
Merge branch 'for-linus' of git://linux-nfs.org/~bfields/linux

* 'for-linus' of git://linux-nfs.org/~bfields/linux: (52 commits)
  knfsd: clear both setuid and setgid whenever a chown is done
  knfsd: get rid of imode variable in nfsd_setattr
  SUNRPC: Use unsigned loop and array index in svc_init_buffer()
  SUNRPC: Use unsigned index when looping over arrays
  SUNRPC: Update RPC server's TCP record marker decoder
  SUNRPC: RPC server still uses 2.4 method for disabling TCP Nagle
  NLM: don't let lockd exit on unexpected svc_recv errors (try #2)
  NFS: don't let nfs_callback_svc exit on unexpected svc_recv errors (try #2)
  Use a zero sized array for raw field in struct fid
  nfsd: use static memory for callback program and stats
  SUNRPC: remove svc_create_thread()
  nfsd: fix comment
  lockd: Fix stale nlmsvc_unlink_block comment
  NFSD: Strip __KERNEL__ testing from unexported header files.
  sunrpc: make token header values less confusing
  gss_krb5: consistently use unsigned for seqnum
  NFSD: Remove NFSv4 dependency on NFSv3
  SUNRPC: Remove PROC_FS dependency
  NFSD: Use "depends on" for PROC_FS dependency
  nfsd: move most of fh_verify to separate function
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Thu, 24 Apr 2008 18:21:08 +0000 (11:21 -0700)]
Merge git://git./linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits)
  V4L/DVB (7731): tuner-xc2028: fix signal strength calculus
  V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares
  V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv
  V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken
  V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800
  V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support
  V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface
  V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2
  V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point
  V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure
  V4L/DVB (7719): pvrusb2: Implement input selection enforcement
  V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections
  V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx
  V4L/DVB (7716): pvrusb2: clean up global functions
  V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__
  V4L/DVB (7714): pvrusb2: Fix hang on module removal
  V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown
  V4L/DVB (7712): pvrusb2: Close connect/disconnect race
  V4L/DVB (7711): pvrusb2: Fix race on module unload
  V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices
  ...

13 years agoMerge branch 'devel'
Trond Myklebust [Thu, 24 Apr 2008 18:01:02 +0000 (14:01 -0400)]
Merge branch 'devel'

13 years agoSUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request
Trond Myklebust [Tue, 22 Apr 2008 20:47:55 +0000 (16:47 -0400)]
SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request

RFC 2203 requires the server to drop the request if it believes the
RPCSEC_GSS context is out of sequence. The problem is that we have no way
on the client to know why the server dropped the request. In order to avoid
spinning forever trying to resend the request, the safe approach is
therefore to always invalidate the RPCSEC_GSS context on every major
timeout.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
13 years agoV4L/DVB (7731): tuner-xc2028: fix signal strength calculus
Mauro Carvalho Chehab [Thu, 24 Apr 2008 14:19:55 +0000 (11:19 -0300)]
V4L/DVB (7731): tuner-xc2028: fix signal strength calculus

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares
Mauro Carvalho Chehab [Thu, 24 Apr 2008 13:56:41 +0000 (10:56 -0300)]
V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares

There are different tables for MTS firmwares. This should be taken into
account while selecting the proper firmware.

While at tuner-xc2028.h, improve some comments.

Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to
diagnose such troubles with PAL/I standard.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv
Alan Cox [Sun, 20 Apr 2008 14:27:36 +0000 (11:27 -0300)]
V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv

Frank Bennett reported that ivtv was causing skype to crash. With help
from one of their developers he showed it was a kernel problem.
VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names
that are too long and does not truncate them so corrupts a few bytes of
the app data area.

Possibly the names also want trimming but for now this should fix the
corruption case.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken
Mauro Carvalho Chehab [Wed, 23 Apr 2008 20:27:27 +0000 (17:27 -0300)]
V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800
Steven Toth [Mon, 14 Jan 2008 02:44:47 +0000 (23:44 -0300)]
V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800

cx23885: Enable cx23417 support on the HVR1800

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support
Steven Toth [Mon, 14 Jan 2008 02:42:44 +0000 (23:42 -0300)]
V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support

cx23885: Add generic cx23417 hardware encoder support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface
Mike Isely [Mon, 21 Apr 2008 06:52:34 +0000 (03:52 -0300)]
V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface

Change how list of possible pvrusb2 inputs is generated to include
only those interfaces that make sense for the interface instance.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2
Mike Isely [Mon, 21 Apr 2008 06:50:39 +0000 (03:50 -0300)]
V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit...
Mike Isely [Mon, 21 Apr 2008 06:49:33 +0000 (03:49 -0300)]
V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure
Mike Isely [Mon, 21 Apr 2008 06:48:41 +0000 (03:48 -0300)]
V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7719): pvrusb2: Implement input selection enforcement
Mike Isely [Mon, 21 Apr 2008 06:47:43 +0000 (03:47 -0300)]
V4L/DVB (7719): pvrusb2: Implement input selection enforcement

In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7718): pvrusb2-dvb: update Kbuild selections
Michael Krufky [Sun, 20 Apr 2008 05:42:55 +0000 (02:42 -0300)]
V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections

These changes are required with the addition of digital television support
for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx
Michael Krufky [Sat, 19 Apr 2008 18:36:51 +0000 (15:36 -0300)]
V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7716): pvrusb2: clean up global functions
Adrian Bunk [Fri, 18 Apr 2008 08:38:56 +0000 (05:38 -0300)]
V4L/DVB (7716): pvrusb2: clean up global functions

This patch contains the following cleanups:
- make the following needlessly global function static:
  - pvr2_hdw_set_cur_freq()
- #if 0 the following unused global functions:
  - pvr2_hdw_get_state_name()
  - pvr2_hdw_get_debug_info_unlocked()
  - pvr2_hdw_get_debug_info_locked()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__
Mike Isely [Wed, 9 Apr 2008 08:44:57 +0000 (05:44 -0300)]
V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__

Apparently the kernel developers no longer consider it proper
etiquette to use __FUNCTION__; everyone must instead use __func__
(even though it breaks with older compilers).  And worse still, actual
effort is being expended to sweep this change throughout the kernel
source tree.  Don't these people have better things to do?  So...
Completely clean out all use of __FUNCTION__ from the pvrusb2 driver
(it was just in the sysfs interface).  I'm not going to use __func__
either.  So there.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7714): pvrusb2: Fix hang on module removal
Mike Isely [Wed, 9 Apr 2008 08:14:11 +0000 (05:14 -0300)]
V4L/DVB (7714): pvrusb2: Fix hang on module removal

The pvrusb2 driver was getting had by this scenario:

1. Task A calls kthread_stop() for task B.
2. Before exiting, then Task B calls kthread_stop() for task C.

The problem is, kthread_stop() wants to allocate an internal resource
to itself (i.e. acquire a lock), which won't be released until
kthread_stop() returns.  But kthread_stop() won't return until task B
is dead.  But task B won't die until it finishes its call to
kthread_stop() for task C, and that will block waiting on the resource
already allocated inside task A.  Deadlock.

With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is
the control thread run inside of pvrusb2-context.c, and task C is any
worker thread run inside of pvrusb2-hdw.c.

This problem got introduced by the previous threading setup change,
which was itself an attempt to fix a module tear-down race (which it
actually did fix).  The lesson here is that a task being waited on as
part of a kthread_stop() simply cannot be allow to also issue a
kthread_stop() - or we make sure not to issue the enclosing
kthread_stop() until we know that the inner kthread_stop() has
completed first.  The solution for the pvrusb2 driver is some hackish
code which changes the main control thread tear down into a two step
process.  This then makes it possible to delay issuing the
kthread_stop() on the control thread until after we know that
everything has been torn down first.  (And yes, we really need that
kthread_stop() because it's the only way to safely guarantee that a
module-referencing kernel thread has safely returned back out of the
module before we finally remove the module.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown
Mike Isely [Mon, 7 Apr 2008 05:57:13 +0000 (02:57 -0300)]
V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown

Earlier fix to handle DVB feed thread aborts was overly-aggressive.
We can take better advantage of what kthread_stop() can do.  This
change simplifies things.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7712): pvrusb2: Close connect/disconnect race
Mike Isely [Mon, 7 Apr 2008 05:22:43 +0000 (02:22 -0300)]
V4L/DVB (7712): pvrusb2: Close connect/disconnect race

If a disconnect happens before initialization is completed, the
pvrusb2 driver can accidentally touch dangling pointers.  The whole
initialization function must be protected by the big_lock, and once
inside that lock, the initialization function should abort if it is
discovered that a disconnect has already taken place.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7711): pvrusb2: Fix race on module unload
Mike Isely [Mon, 7 Apr 2008 05:22:04 +0000 (02:22 -0300)]
V4L/DVB (7711): pvrusb2: Fix race on module unload

The pvrusb2 driver - for basically forever - was not enforcing a
proper module tear-down.  Kernel threads are used inside the driver
and all must be gone before the module can be safely removed.  This
changeset reimplements a chunk of pvrusb2-context.c to enforce this
correctly.  Unfortunately this is not a simple fix.  The new
implementation also cuts back on kernel thread usage; instead of there
being 1 control thread per instance now it's just 1 control thread
shared by all instances.  (By dropping to a single thread then the
module exit function can block on its shutdown and the thread itself
can monitor and cleanly shut down all of the other instances first.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices
Mike Isely [Sun, 6 Apr 2008 07:04:35 +0000 (04:04 -0300)]
V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices

Implement timed measurement of encoder operation for the first time it
is run.  This allows the driver to note when the encoder has been run
successfully for at least 1/4 second.  On top of that implement
various bits to ensure that the encoder has been run once before
digital streaming for OnAir devices.  This is done via several core
state machine tweaks.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7709): pvrusb2: New device attribute for encoder usage in digital mode
Mike Isely [Thu, 3 Apr 2008 07:51:19 +0000 (04:51 -0300)]
V4L/DVB (7709): pvrusb2: New device attribute for encoder usage in digital mode

Some tuners seem to not work in digital mode unless the encoder is
healthy.  Implement a device attribute to represent this flag and
modify the core state machines to enforce this requirement.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7708): pvrusb2-dvb: Fix stuck thread on streaming abort
Mike Isely [Sun, 30 Mar 2008 23:36:31 +0000 (20:36 -0300)]
V4L/DVB (7708): pvrusb2-dvb: Fix stuck thread on streaming abort

If the device fails to stream, the feed thread will block forever
waiting for buffers.  But while in this state it was not looking for
an exit condition from the driver DVB interface.  This caused the
thread to jam.  Implement a new stop flag (which will be set
appropriately) to tell the thread to stop.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7707): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 750xx
Michael Krufky [Fri, 28 Mar 2008 08:49:36 +0000 (05:49 -0300)]
V4L/DVB (7707): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 750xx

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7706): pvrusb2: create a separate pvr2_device_desc structure for 751xx models
Michael Krufky [Fri, 28 Mar 2008 08:48:44 +0000 (05:48 -0300)]
V4L/DVB (7706): pvrusb2: create a separate pvr2_device_desc structure for 751xx models

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7705): pvrusb2: Enable OnAir digital operation
Michael Krufky [Fri, 28 Mar 2008 08:47:47 +0000 (05:47 -0300)]
V4L/DVB (7705): pvrusb2: Enable OnAir digital operation

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7704): pvrusb2: Fix slop involving use of struct which might not be defined
Mike Isely [Fri, 28 Mar 2008 08:43:45 +0000 (05:43 -0300)]
V4L/DVB (7704): pvrusb2: Fix slop involving use of struct which might not be defined

When the DVB interface is not compiled, the pvr2_dvb_props struct is
not available - so it really should be ifdef'ed out as well.  This
didn't cause an error because in this context its usage was as an
opaque pointer.  But it really shouldn't be present at all if DVB is
not enabled.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7703): pvrusb2: Fix minor problem involving ARRAY_SIZE confusion
Mike Isely [Fri, 28 Mar 2008 08:42:10 +0000 (05:42 -0300)]
V4L/DVB (7703): pvrusb2: Fix minor problem involving ARRAY_SIZE confusion

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7702): pvrusb2: Rework USB streaming start/stop execution
Mike Isely [Fri, 28 Mar 2008 08:41:19 +0000 (05:41 -0300)]
V4L/DVB (7702): pvrusb2: Rework USB streaming start/stop execution

The commands to start / stop USB streaming for an analog device are
fairly standard, owing to the fact that all supported devices
apparently started from the same common reference design.  However
with digital mode, the commands seem to vary by vendor.  This change
makes that variance more explicit.  It also cleans up a related
problem for OnAir devices which prevented digital mode from working at
all.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7701): pvrusb2: Centralize handling of simple FX2 commands
Mike Isely [Fri, 28 Mar 2008 08:38:54 +0000 (05:38 -0300)]
V4L/DVB (7701): pvrusb2: Centralize handling of simple FX2 commands

Numerous places in the driver need to issue simple commands to the FX2
microcontroller (e.g. only 1 or 2 bytes, no reply needed).  Previously
each place that did this, had to take lock, set up a central buffer,
and call the function to perform the handshake.  This change puts
these steps into a single spot.  This also has the effect of removing
the need to mess with the control lock from numerous places in the
code.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7700): pvrusb2: Make FX2 command codes unsigned constants
Mike Isely [Fri, 28 Mar 2008 08:36:25 +0000 (05:36 -0300)]
V4L/DVB (7700): pvrusb2: Make FX2 command codes unsigned constants

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7699): pvrusb2: Implement statistics for USB I/O performance / tracking
Mike Isely [Fri, 28 Mar 2008 08:34:45 +0000 (05:34 -0300)]
V4L/DVB (7699): pvrusb2: Implement statistics for USB I/O performance / tracking

Implement a mechanism in the pvrusb2 driver for gathering statistics
on the stream buffering, including bytes transferred, buffers handled,
buffers in flight, etc.  This is useful for debugging certain classes
of streaming issues and for determining if the buffer pool size is
generally correct for the driver.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)
Mike Isely [Fri, 28 Mar 2008 08:32:23 +0000 (05:32 -0300)]
V4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)
Mike Isely [Fri, 28 Mar 2008 08:31:40 +0000 (05:31 -0300)]
V4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7696): pvrusb2: state control tweak
Mike Isely [Fri, 28 Mar 2008 08:30:48 +0000 (05:30 -0300)]
V4L/DVB (7696): pvrusb2: state control tweak

Don't trigger a pathway state change if it's already been triggered
(eliminates some wasted processing and some debug output noise)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)
Mike Isely [Fri, 28 Mar 2008 08:28:20 +0000 (05:28 -0300)]
V4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB is off
Mike Isely [Sun, 16 Mar 2008 05:12:12 +0000 (02:12 -0300)]
V4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB is off

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULL
Mike Isely [Sat, 9 Feb 2008 22:47:52 +0000 (19:47 -0300)]
V4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULL

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-down
Mike Isely [Sat, 9 Feb 2008 22:47:07 +0000 (19:47 -0300)]
V4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-down

Move pvr2_dvb_adapter usage out of the pvrusb2 driver core - it's
really private to the pvrusb2-dvb module and nothing outside of the
dvb implementation should care about it.  Creation / destruction of
the pvr2_dvb_adapter instance is now contained entirely within
pvrusb2-dvb.c.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7691): pvrusb2-dvb: Don't initialize if device lacks a digital side
Mike Isely [Sat, 9 Feb 2008 19:29:52 +0000 (16:29 -0300)]
V4L/DVB (7691): pvrusb2-dvb: Don't initialize if device lacks a digital side

In the end we'd like the dvb interface to always be present - even for
analog devices (via the mpeg encoder).  However right now pvrusb2-dvb
won't operate correctly if the hardware doesn't have a digital tuner,
so don't initialize the DVB interface unless we know we have a digital
tuner.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7690): pvrusb2-dvb: Remove digital_up flag
Mike Isely [Sat, 9 Feb 2008 18:55:54 +0000 (15:55 -0300)]
V4L/DVB (7690): pvrusb2-dvb: Remove digital_up flag

Other pvrusb2-dvb changes have made the digital_up flag obsolete.  So
kill it.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7689): pvrusb2-dvb: Rework module tear-down
Mike Isely [Sat, 9 Feb 2008 18:44:30 +0000 (15:44 -0300)]
V4L/DVB (7689): pvrusb2-dvb: Rework module tear-down

Rather than making an explicit call to tear down the pvrusb2-dvb
module, use the callback in the pvr2_channel structure.  This has the
advantage that now tear-down only happens when it makes sense.  The
previous implementation had scenarios where it was possible for the
tear-down call to happen without a prior initialization.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7688): pvrusb2: Clean up dvb streaming start/stop
Mike Isely [Wed, 6 Feb 2008 09:59:48 +0000 (06:59 -0300)]
V4L/DVB (7688): pvrusb2: Clean up dvb streaming start/stop

Eliminate the need for a separate pvr2_dvb_fh; since in the DVB
context there can only ever be a single instance then there is no need
for a separate instance to handle streaming state.  This simplifies
the module.  Also move streaming start/stop out of the feed thread and
into the driver's main context - which makes it possible for streaming
start up failures to be detected by the DVB core.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7687): pvrusb2: Fix oops in pvrusb2-dvb
Mike Isely [Wed, 6 Feb 2008 07:24:51 +0000 (04:24 -0300)]
V4L/DVB (7687): pvrusb2: Fix oops in pvrusb2-dvb

The pvrusb2-dvb feed thread cannot be allowed to exit by itself
without first waiting for kthread_should_stop() to return true.
Otherwise the driver will have a dangling task_struct context, which
will cause a very nasty kernel oops.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7686): pvrusb2: Fix broken debug interface build
Mike Isely [Mon, 4 Feb 2008 07:22:21 +0000 (04:22 -0300)]
V4L/DVB (7686): pvrusb2: Fix broken debug interface build

Fix pvrusb2 kbuild typo introduced when pvrusb2-dvb was added.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7685): pvrusb2: Fix really bad typo if DVB config option description
Mike Isely [Mon, 4 Feb 2008 04:00:33 +0000 (01:00 -0300)]
V4L/DVB (7685): pvrusb2: Fix really bad typo if DVB config option description

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7684): pvrusb2: Add VIDEO_PVRUSB2_DVB config variable
Mike Isely [Mon, 4 Feb 2008 03:12:16 +0000 (00:12 -0300)]
V4L/DVB (7684): pvrusb2: Add VIDEO_PVRUSB2_DVB config variable

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7683): pvrusb2-dvb: set to DTV mode before attaching frontend
Michael Krufky [Sun, 10 Feb 2008 08:33:37 +0000 (05:33 -0300)]
V4L/DVB (7683): pvrusb2-dvb: set to DTV mode before attaching frontend

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling
Mike Isely [Mon, 4 Feb 2008 03:00:19 +0000 (00:00 -0300)]
V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7681): pvrusb2-dvb: start working on streaming / buffer handling code
Michael Krufky [Mon, 4 Feb 2008 02:55:07 +0000 (23:55 -0300)]
V4L/DVB (7681): pvrusb2-dvb: start working on streaming / buffer handling code

start work on streaming / buffer handling code to feed the software demux

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7680): pvrusb2-dvb: add pvr2_dvb_bus_ctrl to allow frontends to negotiate...
Michael Krufky [Mon, 4 Feb 2008 02:48:09 +0000 (23:48 -0300)]
V4L/DVB (7680): pvrusb2-dvb: add pvr2_dvb_bus_ctrl to allow frontends to negotiate bus access

This function is just a skeleton for now -
a placeholder to remind us to fix it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7679): pvrusb2: add DVB API framework
Michael Krufky [Mon, 4 Feb 2008 02:46:16 +0000 (23:46 -0300)]
V4L/DVB (7679): pvrusb2: add DVB API framework

Add basic framework for the DVB API.  This is enough to control the
tuner & demod of the digital frontend, but the stream & buffer handling
is still missing.

Additional note from Mike Isely <isely@pobox.com> - also, since these
changes are still very experimental arrange for DVB changes to be
compiled in via new CONFIG_VIDEO_PVRUSB2_DVB option, for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7678): pvrusb2: Fix stupid string typo that has been reproducing wildly
Mike Isely [Sun, 16 Mar 2008 04:13:17 +0000 (01:13 -0300)]
V4L/DVB (7678): pvrusb2: Fix stupid string typo that has been reproducing wildly

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7677): saa7134: Add/fix Beholder entries
Dmitry Belimov [Wed, 23 Apr 2008 17:09:08 +0000 (14:09 -0300)]
V4L/DVB (7677): saa7134: Add/fix Beholder entries

Beholder TV/FM tuners:

Changes:
     Add support Beholder Columbus PCMCIA card.
     Add key map for remote control of Beholder Columbus PCMCIA card.
     Fix gpiomask for all Beholder tuners.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
13 years agoV4L/DVB (7676): saa7134: fix: Properly handle busy states on i2c bus
Dmitry Belimov [Wed, 23 Apr 2008 17:07:09 +0000 (14:07 -0300)]
V4L/DVB (7676): saa7134: fix: Properly handle busy states on i2c bus

There are two conditions, reported by saa7134 that indicates that the I2C bus
is busy: TO_SCL and TO_ARB.

On both states, it needs to wait for I2C release, before using the bus.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>