linux-2.6.git
11 years agosh: Reworked SH7780 PCI initialization.
Paul Mundt [Fri, 29 Jan 2010 13:19:04 +0000 (22:19 +0900)]
sh: Reworked SH7780 PCI initialization.

This consolidates the PCI initialization code for all of the pci-sh7780
users, and sets up the memory window dynamically as opposed to using
hardcoded window positions.

A number of bugs were fixed at the same time, including the PIO handling
and master abort timeout settings being incorrect.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Kill off deprecated fixed PCI memory window accessors.
Paul Mundt [Fri, 29 Jan 2010 07:14:29 +0000 (16:14 +0900)]
sh: Kill off deprecated fixed PCI memory window accessors.

This kills off the deprected fixed memory range accessors for
the cases of non-translatable ioremapping.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Kill off superfluous sh_bios references from compressed loader.
Paul Mundt [Thu, 28 Jan 2010 09:26:37 +0000 (18:26 +0900)]
sh: Kill off superfluous sh_bios references from compressed loader.

The VBR value needs to be initialized in order for any of the bios
trapping to work, and as we don't do that until slightly later in the
boot process, this has no real chance of working.

The only reason for using this in the past was due to the fact that early
serial initialization wasn't possible, but now that early sh-sci is
supported by everyone, there's no longer any reason to support the
sh_bios hacks in the first place. Given that, we just kill off the
references completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Fix up the ioremap_fixed() build for nommu.
Paul Mundt [Thu, 28 Jan 2010 09:17:29 +0000 (18:17 +0900)]
sh: Fix up the ioremap_fixed() build for nommu.

arch/sh/kernel/setup.c:455: error: implicit declaration of function 'ioremap_fixed_init'

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Fix up read-only variable assignment in pcibios_align_resource().
Paul Mundt [Thu, 28 Jan 2010 09:15:05 +0000 (18:15 +0900)]
sh: Fix up read-only variable assignment in pcibios_align_resource().

arch/sh/drivers/pci/pci.c:167: error: assignment of read-only location '*res'

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Quiet noisy coherent DMA unmapping on R2D.
Paul Mundt [Thu, 28 Jan 2010 06:55:37 +0000 (15:55 +0900)]
sh: Quiet noisy coherent DMA unmapping on R2D.

IRQs are re-enabled at a later stage when doing the unmapping on R2D via
the sm501 USB coherent DMA, resulting in the irqs_disabled() check
producing considerable noise for this configuration. Just kill off the
check, which was blindly copied from x86 anyways.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-titan: Kill off unused PIO port mangling.
Paul Mundt [Thu, 28 Jan 2010 06:08:21 +0000 (15:08 +0900)]
sh: mach-titan: Kill off unused PIO port mangling.

Nothing is using this, kill it off. Fixing up access sizes can be done
with trapped I/O for anyone wanting to make use of this for devices that
need it, everything else is already pure MMIO.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: fixed cmpxchg gRB version
Giuseppe CAVALLARO [Mon, 25 Jan 2010 15:12:07 +0000 (16:12 +0100)]
sh: fixed cmpxchg gRB version

This patch fixes a bug within the cmpxchg GRB version.

A problem was notices while running some tests to stress
the priority inheritance, for example pi_stress
(http://rt.wiki.kernel.org/index.php/PI_Mutex_Test).

Also, without this patch, after applying the latest work to
consolidate atomic_cmpxchg() definitions (commit:
8c0b8139c87cfe8b95c6e763b4ca3190aa9b1ad0)
the Kernel doesn't boot at all.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: kmemleak support.
Chris Smith [Wed, 27 Jan 2010 13:03:11 +0000 (22:03 +0900)]
sh: kmemleak support.

Enables support for kmemleak on sh.

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Optimize runtime disabling of trapped I/O.
Paul Mundt [Wed, 27 Jan 2010 12:56:57 +0000 (21:56 +0900)]
sh: Optimize runtime disabling of trapped I/O.

Presently trapped I/O is only registered if it's not explicitly disabled
for the platforms that select it openly. From the fault path this runs
through an address lookup before figuring out that nothing matches and
falls back through the error path, but we can forego the lookup
completely by testing if it's been explicitly disabled. This provides a
measurable speedup for things like qemu that rely on runtime disabling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: flag ctrl_in/outX as __deprecated.
Paul Mundt [Tue, 26 Jan 2010 04:02:10 +0000 (13:02 +0900)]
sh: flag ctrl_in/outX as __deprecated.

These routines are unsuitable for cross-platform use and no new code
should be using them, flag them as deprecated in order to give drivers
sufficient time to migrate over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Mass ctrl_in/outX to __raw_read/writeX conversion.
Paul Mundt [Tue, 26 Jan 2010 03:58:40 +0000 (12:58 +0900)]
sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Conserve fixmap slots when IOREMAP_FIXED=n.
Paul Mundt [Thu, 21 Jan 2010 07:16:36 +0000 (16:16 +0900)]
sh: Conserve fixmap slots when IOREMAP_FIXED=n.

Presently the IOREMAP_FIXED fixmaps are always defined, even if the
platform isn't capable of supporting it. Since we already have an ifdef
for it, ifdef the entries, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Kill off the special uncached section and fixmap.
Paul Mundt [Thu, 21 Jan 2010 07:05:25 +0000 (16:05 +0900)]
sh: Kill off the special uncached section and fixmap.

Now that cached_to_uncached works as advertized in 32-bit mode and we're
never going to be able to map < 16MB anyways, there's no need for the
special uncached section. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Track the uncached mapping size.
Paul Mundt [Thu, 21 Jan 2010 06:54:31 +0000 (15:54 +0900)]
sh: Track the uncached mapping size.

This provides a variable for tracking the uncached mapping size, and uses
it for pretty printing the uncached lowmem range. Beyond this, we'll also
be building on top of this for figuring out from where the remainder of
P2 becomes usable when constructing unrelated mappings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Rework P2 to only include kernel text.
Paul Mundt [Thu, 21 Jan 2010 06:42:58 +0000 (15:42 +0900)]
sh: Rework P2 to only include kernel text.

This effectively neutralizes P2 by getting rid of P1 identity mapping
for all available memory and instead only establishes a single unbuffered
PMB entry (16MB -- the smallest available) that covers the kernel.

As using segmentation for abusing caching attributes in drivers is no
longer supported (and there are no drivers that can be enabled in 32-bit
mode that do this), this provides us with all of the uncached access
needs by the kernel itself.

Drivers and their ilk need to specify their caching attributes when
remapping through page tables, as usual.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: initial PMB mapping iteration by helper macro.
Paul Mundt [Thu, 21 Jan 2010 05:19:41 +0000 (14:19 +0900)]
sh: initial PMB mapping iteration by helper macro.

All of the cached/uncached mapping setup is duplicated for each size, and
also misses out on the 16MB case. Rather than duplicating the same iter
code for that we just consolidate it in to a helper macro that builds an
iter for each size. The 16MB case is then trivially bolted on at the end.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: pretty print virtual memory map on boot.
Paul Mundt [Wed, 20 Jan 2010 09:48:17 +0000 (18:48 +0900)]
sh: pretty print virtual memory map on boot.

This cribs the pretty printing from arch/x86/mm/init_32.c to dump the
virtual memory layout on boot. This is primarily intended as a debugging
aid, given that the newer CPUs have full control over their address space
and as such have little to nothing in common with the legacy layout.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-sdk7786: Probe system FPGA area mapping.
Paul Mundt [Wed, 20 Jan 2010 09:25:19 +0000 (18:25 +0900)]
sh: mach-sdk7786: Probe system FPGA area mapping.

This implements dynamic probing for the system FPGA. The system reset
controller contains a fixed magic read word in order to identify the
FPGA. This just utilizes a simple loop that scans across all of the fixed
physical areas (area 0 through area 6) to locate the FPGA.

The FPGA also contains register information detailing the area mappings
and chip select settings for all of the other blocks, so this needs to be
done before we can set up anything else.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Correct iounmap fixmap teardown.
Paul Mundt [Wed, 20 Jan 2010 09:10:30 +0000 (18:10 +0900)]
sh: Correct iounmap fixmap teardown.

iounmap_fixed() had a couple of bugs in it that caused it to effectively
fail at life. The total number of pages to unmap factored in the mapping
offset and aligned up to the next page boundary, which doesn't match the
ioremap_fixed() behaviour.

When ioremap_fixed() pegs a slot, the address in the mapping data already
contains the offset displacement, and the size is recorded verbatim given
that we're only interested in total number of pages required. As such, we
need to calculate the total number from the original size in the unmap
path as well.

At the same time, there was also an off-by-1 problem in the fixmap index
calculation which has also been corrected.

Previously subsequent remaps of an identical fixmap index would trigger
the pte_ERROR() in set_pte_phys():

arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).
arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).
arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).
arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).
arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).
arch/sh/mm/init.c:77: bad pte 8053ffb0(0000781003fff506).

With this patch in place, the iounmap-driven fixmap teardown actually
does what it's supposed to do.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-sdk7786: reset controller reboot support.
Paul Mundt [Wed, 20 Jan 2010 07:53:11 +0000 (16:53 +0900)]
sh: mach-sdk7786: reset controller reboot support.

This wires up the machine_ops reboot call to use the system reset
controller.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: machine_ops based reboot support.
Paul Mundt [Wed, 20 Jan 2010 07:42:52 +0000 (16:42 +0900)]
sh: machine_ops based reboot support.

This provides a machine_ops-based reboot interface loosely cloned from
x86, and converts the native sh32 and sh64 cases over to it.

Necessary both for tying in SMP support and also enabling platforms like
SDK7786 to add support for their microcontroller-based power managers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Make 29/32-bit mode check helper generally available.
Paul Mundt [Wed, 20 Jan 2010 07:40:48 +0000 (16:40 +0900)]
sh: Make 29/32-bit mode check helper generally available.

Presently __in_29bit_mode() is only defined for the PMB case, but
it's also easily derived from the CONFIG_29BIT and CONFIG_32BIT &&
CONFIG_PMB=n cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-sdk7786: Split out FPGA IRQ controller setup.
Paul Mundt [Wed, 20 Jan 2010 06:23:54 +0000 (15:23 +0900)]
sh: mach-sdk7786: Split out FPGA IRQ controller setup.

This moves out the FPGA IRQ controller setup code to its own file, in
preparation for switching off of IRL mode and having it provide its own
irq_chip.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-sdk7786: FPGA updates.
Paul Mundt [Wed, 20 Jan 2010 06:08:36 +0000 (15:08 +0900)]
sh: mach-sdk7786: FPGA updates.

This does a bit of refactoring of the FPGA management code. The primary
FPGA initialization is moved out to its own file in preparation for
implementing some of the more complex capabilities, a complete set of
register definitions is provided, and all of the existing users in the
board code are moved over to use the new interface instead of setting up
overlapping mappings. This also corrects the FPGA size, which previously
was chomped off at the SDIF control register.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Handle SH-4 FPU variants with broken CVR values.
Paul Mundt [Tue, 19 Jan 2010 18:38:56 +0000 (03:38 +0900)]
sh: Handle SH-4 FPU variants with broken CVR values.

Usually we can look to the CVR to work out whether we have an FPU or not.
Unfortunately not all parts comply with this, so just set the flag
manually for all SH-4 parts and clear it on the only SH-4 that doesn't
have one (SH4-501).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: update PFC to allow any enum in MARK lists
Magnus Damm [Tue, 19 Jan 2010 13:52:28 +0000 (13:52 +0000)]
sh: update PFC to allow any enum in MARK lists

This patch updates the PFC code with some clarifying
comments together with a functional change. The change
allows function type of GPIO to select any type of enum
in their MARK lists. Without this patch only function
type of enums are allowed in MARK lists.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Shut up noisy IOREMAP_FIXED=n build.
Paul Mundt [Tue, 19 Jan 2010 17:45:05 +0000 (02:45 +0900)]
sh: Shut up noisy IOREMAP_FIXED=n build.

The ioremap_fixed() stub neglected to provide a return value, resulting
in a fairly noisy build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: support SIU sourcing from external clock on sh7722
Guennadi Liakhovetski [Tue, 19 Jan 2010 11:14:31 +0000 (11:14 +0000)]
sh: support SIU sourcing from external clock on sh7722

Implement .set_rate() for all SH "div4 clocks," .enable(), .disable(), and
.set_parent() for those, that support them. This allows, among other uses,
reparenting of SIU clocks to the external source, and enabling and
disabling of the IrDA clock on sh7722.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Fix up sdk7780 and urquell builds.
Paul Mundt [Tue, 19 Jan 2010 11:10:33 +0000 (20:10 +0900)]
sh: Fix up sdk7780 and urquell builds.

These two got broken in the heartbeat private data conversion,
fix them up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: urquell: Handle EXTAL configuration here, too.
Paul Mundt [Tue, 19 Jan 2010 11:09:28 +0000 (20:09 +0900)]
sh: urquell: Handle EXTAL configuration here, too.

urquell happens to use the same mode pins and EXTAL configuration as
SDK7786, so just copy it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: mach-sdk7786: Detect/configure/propagate EXTAL.
Paul Mundt [Tue, 19 Jan 2010 10:38:36 +0000 (19:38 +0900)]
sh: mach-sdk7786: Detect/configure/propagate EXTAL.

This uses the mode pins exposed through the FPGA to work out whether
we're driven from EXTAL or not and does the appropriate setup and
propagation through the clock framework.

This will also -EINVAL out for anyone adding in their own oscillators,
forcing proper configuration with the clock framework instead of
proceeding on with bogus clock values.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: SH7786 clock framework rewrite.
Paul Mundt [Tue, 19 Jan 2010 10:37:14 +0000 (19:37 +0900)]
sh: SH7786 clock framework rewrite.

This rewrites the SH7786 clock framework support completely. It's
reworked to provide all of the DIV4 and MSTP function clocks. This brings
it in line with the current clock framework code and lets us drop SH7786
from the list of CPUs that require legacy CPG handling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh64: Fixup build breakage from breakpoint handler rename.
Paul Mundt [Tue, 19 Jan 2010 06:58:27 +0000 (15:58 +0900)]
sh64: Fixup build breakage from breakpoint handler rename.

The breakpoint handler was renamed on sh32, but sh64 was overlooked in
the conversion. Fix it up now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh64: Use the shared FPU state restorer.
Paul Mundt [Tue, 19 Jan 2010 06:55:27 +0000 (15:55 +0900)]
sh64: Use the shared FPU state restorer.

This kills off the sh64-specific state restorer and switches over to
the generic one.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh64: Fix up PC casting in unaligned fixup notifier with 32bit ABI.
Paul Mundt [Tue, 19 Jan 2010 06:41:50 +0000 (15:41 +0900)]
sh64: Fix up PC casting in unaligned fixup notifier with 32bit ABI.

Presently the build bails with the following:

  CC      arch/sh/mm/alignment.o
cc1: warnings being treated as errors
arch/sh/mm/alignment.c: In function 'unaligned_fixups_notify':
arch/sh/mm/alignment.c:69: warning: cast to pointer from integer of different size
arch/sh/mm/alignment.c:74: warning: cast to pointer from integer of different size
make[2]: *** [arch/sh/mm/alignment.o] Error 1

This is due to the fact that regs->pc is always 64-bit, while the pointer size
depends on the ABI. Wrapping through instruction_pointer() takes care of the
appropriate casting for both configurations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh64: Fix up the build for the thread_xstate changes.
Paul Mundt [Tue, 19 Jan 2010 06:40:03 +0000 (15:40 +0900)]
sh64: Fix up the build for the thread_xstate changes.

This updates the sh64 processor info with the sh32 changes in order to
tie in to the generic task_xstate management code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Kill off now bogus fixmap/page wiring documentation.
Paul Mundt [Tue, 19 Jan 2010 06:22:52 +0000 (15:22 +0900)]
sh: Kill off now bogus fixmap/page wiring documentation.

The plans for _PAGE_WIRED were detailed in a comment with the fixmap
code, but as it's now all taken care of, we no longer have any reason for
keeping it around, particularly since it's no longer accurate. Kill it
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Split out MMUCR.URB based entry wiring in to shared helper.
Paul Mundt [Tue, 19 Jan 2010 06:20:35 +0000 (15:20 +0900)]
sh: Split out MMUCR.URB based entry wiring in to shared helper.

Presently this is duplicated between tlb-sh4 and tlb-pteaex. Split the
helpers out in to a generic tlb-urb that can be used by any parts
equipped with MMUCR.URB.

At the same time, move the SH-5 code out-of-line, as we require single
global state for DTLB entry wiring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Provide a dummy _PAGE_WIRED flag for non-X2TLB parts.
Paul Mundt [Tue, 19 Jan 2010 05:23:39 +0000 (14:23 +0900)]
sh: Provide a dummy _PAGE_WIRED flag for non-X2TLB parts.

This provides a dummy value for legacy parts which permits the entry
wiring to be open-coded. The compiler takes care of optimizing the entry
wiring away in these cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Limit ioremap_prot() to 32bit pgprot parts.
Paul Mundt [Tue, 19 Jan 2010 05:00:14 +0000 (14:00 +0900)]
sh: Limit ioremap_prot() to 32bit pgprot parts.

Presently ioremap_prot() uses an unsigned long to pass the pgprot value
around. This results in the upper half of the pgprot being chomped when
using 64-bit pgprots on a 32-bit ABI (X2TLB and SH-5).

As the only users of ioremap_prot() are presently legacy parts, this
doesn't cause too much of an issue. In the future when the interface is
converted to use pgprot_t directly this can be re-enabled for the other
parts, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Convert p3_ioremap() users to ioremap_prot().
Paul Mundt [Tue, 19 Jan 2010 04:55:41 +0000 (13:55 +0900)]
sh: Convert p3_ioremap() users to ioremap_prot().

This kills off the ancient p3_ioremap(), converting over to the more
generic ioremap_prot() instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Kill off duplicate address alignment in ioremap_fixed().
Paul Mundt [Tue, 19 Jan 2010 04:49:19 +0000 (13:49 +0900)]
sh: Kill off duplicate address alignment in ioremap_fixed().

This is already taken care of in the top-level ioremap, and now that
no one should be calling ioremap_fixed() directly we can simply throw the
mapping displacement in as an additional argument.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Prevent 64-bit pgprot clobbering across ioremap implementations.
Paul Mundt [Tue, 19 Jan 2010 04:34:38 +0000 (13:34 +0900)]
sh: Prevent 64-bit pgprot clobbering across ioremap implementations.

Presently 'flags' gets passed around a lot between the various ioremap
helpers and implementations, which is only 32-bits. In the X2TLB case
we use 64-bit pgprots which presently results in the upper 32bits being
chopped off (which handily include our read/write/exec permissions).

As such, we convert everything internally to using pgprot_t directly and
simply convert over with pgprot_val() where needed. With this in place,
transparent fixmap utilization for early ioremap works as expected.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Flag __ioremap_caller() __init_refok.
Paul Mundt [Mon, 18 Jan 2010 12:45:00 +0000 (21:45 +0900)]
sh: Flag __ioremap_caller() __init_refok.

The mem_init_done test makes sure that this path is only entered in
__init cases, so leaving ioremap_fixed() as __init and flagging the
caller __init_refok is sufficient.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Handle unmapping of fixed slots transparently in iounmap().
Paul Mundt [Mon, 18 Jan 2010 12:33:08 +0000 (21:33 +0900)]
sh: Handle unmapping of fixed slots transparently in iounmap().

iounmap() should balance whatever is done by ioremap(). Presently
ioremap() can do any of fixed mappings, PMB mappings, or page table
mappings. Presently only the latter two are handled through the standard
unmap path, so tie in the fixed unmapping, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Make iounmap_fixed() return success/failure for iounmap() path.
Paul Mundt [Mon, 18 Jan 2010 12:30:29 +0000 (21:30 +0900)]
sh: Make iounmap_fixed() return success/failure for iounmap() path.

This converts iounmap_fixed() to return success/error if it handled the
unmap request or not. At the same time, drop the __init label, as this
can be called in to later.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Merge _32/_64 ioremap implementations.
Paul Mundt [Mon, 18 Jan 2010 12:21:32 +0000 (21:21 +0900)]
sh: Merge _32/_64 ioremap implementations.

There is nothing of interest in the _64 version anymore, so the _32 one
can be renamed and used unconditionally.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Fixup the IOREMAP_FIXED=n build.
Paul Mundt [Mon, 18 Jan 2010 12:20:13 +0000 (21:20 +0900)]
sh: Fixup the IOREMAP_FIXED=n build.

Presently the fixed ioremap API is only defined when CONFIG_IOREMAP_FIXED
is set. As we want to call in to it unconditionally, provide a stubbed
out interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Handle early ioremaps through fixed mappings.
Paul Mundt [Mon, 18 Jan 2010 12:08:32 +0000 (21:08 +0900)]
sh: Handle early ioremaps through fixed mappings.

This adds in a mem_init_done to work out when a standard ioremap() is
possible, falling back to the fixmap based ioremap otherwise.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agoMerge branch 'sh/stable-updates'
Paul Mundt [Mon, 18 Jan 2010 11:47:37 +0000 (20:47 +0900)]
Merge branch 'sh/stable-updates'

11 years agoMerge branch 'sh/ioremap-fixed'
Paul Mundt [Mon, 18 Jan 2010 11:42:39 +0000 (20:42 +0900)]
Merge branch 'sh/ioremap-fixed'

11 years agosh: Need IRQs enabled for init_fpu().
Paul Mundt [Mon, 18 Jan 2010 11:39:49 +0000 (20:39 +0900)]
sh: Need IRQs enabled for init_fpu().

This tosses in a local_irq_enable()/disable() pair around the init_fpu()
callsite in the FPU state restore exception handler. Fixes up a slab BUG
triggered by making a slab cache allocation that can sleep whilst
irqs_disabled(). This follows the behaviour undertaken by the x86
implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agosh: Setup early PMB mappings.
Matt Fleming [Mon, 18 Jan 2010 10:33:10 +0000 (19:33 +0900)]
sh: Setup early PMB mappings.

More and more boards are going to start shipping that boot with the MMU
in 32BIT mode by default. Previously we relied on the bootloader to
setup PMB mappings for use by the kernel but we also need to cater for
boards whose bootloaders don't set them up.

If CONFIG_PMB_LEGACY is not enabled we have full control over our PMB
mappings and can compress our address space. Usually, the distance
between the the cached and uncached mappings of RAM is always 512MB,
however we can compress the distance to be the amount of RAM on the
board.

pmb_init() now becomes much simpler. It no longer has to calculate any
mappings, it just has to synchronise the software PMB table with the
hardware.

Tested on SDK7786 and SH7785LCR.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Sun, 17 Jan 2010 19:01:16 +0000 (11:01 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  do_add_mount() should sanitize mnt_flags
  CIFS shouldn't make mountpoints shrinkable
  mnt_flags fixes in do_remount()
  attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared()
  may_umount() needs namespace_sem
  Fix configfs leak
  Fix the -ESTALE handling in do_filp_open()
  ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path
  Fix ACC_MODE() for real
  Unrot uml mconsole a bit
  hppfs: handle ->put_link()
  Kill 9p readlink()
  fix autofs/afs/etc. magic mountpoint breakage

11 years agomodpost: fix segfault in sym_is() with prefixed arches
Mike Frysinger [Sat, 16 Jan 2010 21:57:34 +0000 (08:27 +1030)]
modpost: fix segfault in sym_is() with prefixed arches

The sym_is() compares a symbol in an attempt to automatically skip symbol
prefixes.  It does this first by searching the real symbol with the normal
unprefixed symbol.  But then it uses the length of the original symbol to
check the end of the substring instead of the length of the symbol it is
looking for.  On non-prefixed arches, this is effectively the same thing,
so there is no problem.  On prefixed-arches, since this is exceeds by just
one byte, a crash is rare and it is usually a NUL byte anyways.  But every
once in a blue moon, you get the right page alignment and it segfaults.

For example, on the Blackfin arch, sym_is() will be called with the real
symbol "___mod_usb_device_table" as "symbol" when looking for the normal
symbol "__mod_usb_device_table" as "name".  The substring will thus return
one byte into "symbol" and store it into "match".  But then "match" will
be indexed with the length of "symbol" instead of "name" and so we will
exceed the storage.  i.e. the code ends up doing:
char foo[] = "abc"; return foo[strlen(foo)+1] == '\0';

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopage allocator: update NR_FREE_PAGES only when necessary
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:18 +0000 (17:01 -0800)]
page allocator: update NR_FREE_PAGES only when necessary

commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary)
made one minor regression.  if __rmqueue() was failed, NR_FREE_PAGES stat
go wrong.  this patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Huang Shijie <shijie8@gmail.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Sat, 16 Jan 2010 20:34:56 +0000 (12:34 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Do not use device name after device_unregister
  i2c/pca: Don't use *_interruptible
  i2c-ali1563: Remove sparse warnings
  i2c: Test off by one in {piix4,vt596}_transaction()
  i2c-core: Storage class should be before const qualifier

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 16 Jan 2010 20:31:42 +0000 (12:31 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: Ensure hub revision set for all ACPI modes.
  x86, uv: Add function retrieving node controller revision number
  x86: xen: 64-bit kernel RPL should be 0
  x86: kernel_thread() -- initialize SS to a known state
  x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
  x86: SGI UV: Fix mapping of MMIO registers
  x86: mce.h: Fix warning in header checks

11 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 16 Jan 2010 20:31:30 +0000 (12:31 -0800)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futexes: Remove rw parameter from get_futex_key()

11 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 16 Jan 2010 20:27:47 +0000 (12:27 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Check if /dev/null can be used as the -o gcc argument
  perf tools: Move QUIET_STDERR def to before first use
  perf: Stop stack frame walking off kernel addresses boundaries

11 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 16 Jan 2010 20:27:25 +0000 (12:27 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/filters: Add comment for match callbacks
  tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
  tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
  lib: Introduce strnstr()
  tracing/filters: Fix MATCH_END_ONLY filter matching
  tracing/filters: Fix MATCH_FRONT_ONLY filter matching
  ftrace: Fix MATCH_END_ONLY function filter
  tracing/x86: Derive arch from bits argument in recordmcount.pl
  ring-buffer: Add rb_list_head() wrapper around new reader page next field
  ring-buffer: Wrap a list.next reference with rb_list_head()

11 years agorevert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"
Mark Brown [Sat, 16 Jan 2010 01:01:40 +0000 (17:01 -0800)]
revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"

Fix divide by zero and broken output.  Commit 600ce1a0fa ("fix clock
setting for Samsung SoC Framebuffer") introduced a mandatory refresh
parameter to the platform data for the S3C framebuffer but did not
introduce any validation code, causing existing platforms (none of which
have refresh set) to divide by zero whenever the framebuffer is
configured, generating warnings and unusable output.

Ben Dooks noted several problems with the patch:

 - The platform data supplies the pixclk directly and should already
   have taken care of the refresh rate.
 - The addition of a window ID parameter doesn't help since only the
   root framebuffer can control the pixclk.
 - pixclk is specified in picoseconds (rather than Hz) as the patch
   assumed.

and suggests reverting the commit so do that.  Without fixing this no
mainline user of the driver will produce output.

[akpm@linux-foundation.org: don't revert the correct bit]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: fix shared mmap after truncate shrinkage problems
David Howells [Sat, 16 Jan 2010 01:01:39 +0000 (17:01 -0800)]
nommu: fix shared mmap after truncate shrinkage problems

Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen
over the end of a truncation.  The problem is that
ramfs_nommu_check_mappings() checks that the reduced file size against the
VMA tree, but not the vm_region tree.

The following sequence of events can cause the problem:

fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600);
ftruncate(fd, 32 * 1024);
a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
munmap(a, 32 * 1024);
ftruncate(fd, 16 * 1024);
c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);

Mapping 'a' creates a vm_region covering 32KB of the file.  Mapping 'b'
sees that the vm_region from 'a' is covering the region it wants and so
shares it, pinning it in memory.

Mapping 'a' then goes away and the file is truncated to the end of VMA
'b'.  However, the region allocated by 'a' is still in effect, and has
_not_ been reduced.

Mapping 'c' is then created, and because there's a vm_region covering the
desired region, get_unmapped_area() is _not_ called to repeat the check,
and the mapping is granted, even though the pages from the latter half of
the mapping have been discarded.

However:

d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);

Mapping 'd' should work, and should end up sharing the region allocated by
'a'.

To deal with this, we shrink the vm_region struct during the truncation,
lest do_mmap_pgoff() take it as licence to share the full region
automatically without calling the get_unmapped_area() file op again.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: fix race between ramfs truncation and shared mmap
David Howells [Sat, 16 Jan 2010 01:01:36 +0000 (17:01 -0800)]
nommu: fix race between ramfs truncation and shared mmap

Fix the race between the truncation of a ramfs file and an attempt to make
a shared mmap of region of that file.

The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to
verify that the file region is made of contiguous pages and to find its
base address - but there isn't any locking to guarantee this region until
vma_prio_tree_insert() is called by add_vma_to_mm().

Note that moving the functionality into f_op->mmap() doesn't help as that
is also called before vma_prio_tree_insert().

Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it
does its checks.  This means that this function will wait whilst mmaps
take place.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: don't need get_unmapped_area() for NOMMU
David Howells [Sat, 16 Jan 2010 01:01:35 +0000 (17:01 -0800)]
nommu: don't need get_unmapped_area() for NOMMU

get_unmapped_area() is unnecessary for NOMMU as no-one calls it.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: remove a superfluous check of vm_region::vm_usage
David Howells [Sat, 16 Jan 2010 01:01:34 +0000 (17:01 -0800)]
nommu: remove a superfluous check of vm_region::vm_usage

In split_vma(), there's no need to check if the VMA being split has a
region that's in use by more than one VMA because:

 (1) The preceding test prohibits splitting of non-anonymous VMAs and regions
     (eg: file or chardev backed VMAs).

 (2) Anonymous regions can't be mapped multiple times because there's no handle
     by which to refer to the already existing region.

 (3) If a VMA has previously been split, then the region backing it has also
     been split into two regions, each of usage 1.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: struct vm_region's vm_usage count need not be atomic
David Howells [Sat, 16 Jan 2010 01:01:33 +0000 (17:01 -0800)]
nommu: struct vm_region's vm_usage count need not be atomic

The vm_usage count field in struct vm_region does not need to be atomic as
it's only even modified whilst nommu_region_sem is write locked.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonommu: fix SYSV SHM for NOMMU
David Howells [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
nommu: fix SYSV SHM for NOMMU

Commit c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.

Put it back conditionally on CONFIG_MMU=n.

file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file).  It needs to be called prior to file->f_ops->mmap() being called.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosysdev: fix prototype for memory_sysdev_class show/store functions
Wu Fengguang [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
sysdev: fix prototype for memory_sysdev_class show/store functions

The function prototype mismatches in call stack:

                [<ffffffff81494268>] print_block_size+0x58/0x60
                [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30
                [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0
                [<ffffffff81176328>] vfs_read+0xc8/0x180

Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
$ hexdump /sys/devices/system/memory/block_size_bytes
0000000 0000 0000 0000 0000
0000008

After patch:
cat /sys/devices/system/memory/block_size_bytes
0x8000000

This complements commits c29af9636 and 4a0b2b4dbe.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemory-hotplug: add 0x prefix to HEX block_size_bytes
Wu Fengguang [Sat, 16 Jan 2010 01:01:31 +0000 (17:01 -0800)]
memory-hotplug: add 0x prefix to HEX block_size_bytes

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemcg: ensure list is empty at rmdir
Daisuke Nishimura [Sat, 16 Jan 2010 01:01:30 +0000 (17:01 -0800)]
memcg: ensure list is empty at rmdir

Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on
success.  But this doesn't guarantee memcg's LRU is really empty, because
there are some cases in which !PageCgrupUsed pages exist on memcg's LRU.

For example:
- Pages can be uncharged by its owner process while they are on LRU.
- race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common().

So there can be a case in which the usage is zero but some of the LRUs are not empty.

OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with
rmdir, accesses the mem_cgroup, so this access can cause a problem if it
races with rmdir because the mem_cgroup might have been freed by rmdir.

Actually, I saw a bug which seems to be caused by this race.

[1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230
[1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0
[1530745.950651] Oops: 0002 [#1] SMP
[1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map
[1530745.950651] CPU 3
[1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
[1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G   M       2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065]
[1530745.950651] RIP: 0010:[<ffffffff810fbc11>]  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651] RSP: 0018:ffff8803863ddcb8  EFLAGS: 00010002
[1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0
[1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238
[1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643
[1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000
[1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310
[1530745.950651] FS:  0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000
[1530745.950651] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0
[1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0)
[1530745.950651] Stack:
[1530745.950651]  ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a
[1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000
[1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046
[1530745.950651] Call Trace:
[1530745.950651]  [<ffffffff810c739a>] release_pages+0x142/0x1e7
[1530745.950651]  [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112
[1530745.950651]  [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112
[1530745.950651]  [<ffffffff810c78a9>] lru_add_drain+0x76/0x94
[1530745.950651]  [<ffffffff810dba0c>] exit_mmap+0x6e/0x145
[1530745.950651]  [<ffffffff8103f52d>] mmput+0x5e/0xcf
[1530745.950651]  [<ffffffff81043ea8>] exit_mm+0x11c/0x129
[1530745.950651]  [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9
[1530745.950651]  [<ffffffff81045353>] do_exit+0x1f5/0x6b7
[1530745.950651]  [<ffffffff8106133f>] ? up_read+0x2b/0x2f
[1530745.950651]  [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67
[1530745.950651]  [<ffffffff81045898>] do_group_exit+0x83/0xb0
[1530745.950651]  [<ffffffff810458dc>] sys_exit_group+0x17/0x1b
[1530745.950651]  [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b
[1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b
[1530745.950651] RIP  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651]  RSP <ffff8803863ddcb8>
[1530745.950651] CR2: 0000000000000230
[1530745.950651] ---[ end trace c3419c1bb8acc34f ]---
[1530745.950651] Fixing recursive fault but reboot is needed!

The problem here is pages on LRU may contain pointer to stale memcg.  To
make res->usage to be 0, all pages on memcg must be uncharged or moved to
another(parent) memcg.  Moved page_cgroup have already removed from
original LRU, but uncharged page_cgroup contains pointer to memcg withou
PCG_USED bit.  (This asynchronous LRU work is for improving performance.)
If PCG_USED bit is not set, page_cgroup will never be added to memcg's
LRU.  So, about pages not on LRU, they never access stale pointer.  Then,
what we have to take care of is page_cgroup _on_ LRU list.  This patch
fixes this problem by making mem_cgroup_force_empty() visit all LRUs
before exiting its loop and guarantee there are no pages on its LRU.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agovirtio: fix section mismatch warnings
Jeff Mahoney [Sat, 16 Jan 2010 01:01:26 +0000 (17:01 -0800)]
virtio: fix section mismatch warnings

Fix fixes the following warnings by renaming the driver structures to be
suffixed with _driver.

WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove()

WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove()

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agovmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:25 +0000 (17:01 -0800)]
vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable

Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double
check it should be asleep) can cause kswapd to enter an infinite loop if
running on a single-CPU system.  If all zones are unreclaimble,
sleeping_prematurely return 1 and kswapd will call balance_pgdat() again.
but it's totally meaningless, balance_pgdat() doesn't anything against
unreclaimable zone!

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reported-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosmp_call_function_any(): pass the node value to cpumask_of_node()
David John [Sat, 16 Jan 2010 01:01:23 +0000 (17:01 -0800)]
smp_call_function_any(): pass the node value to cpumask_of_node()

The change in acpi_cpufreq to use smp_call_function_any causes a warning
when it is called since the function erroneously passes the cpu id to
cpumask_of_node rather than the node that the cpu is on.  Fix this.

cpumask_of_node(3): node > nr_node_ids(1)
Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f189 #223
Call Trace:
 [<ffffffff81028bb3>] cpumask_of_node+0x23/0x58
 [<ffffffff81061f51>] smp_call_function_any+0x65/0xfa
 [<ffffffff810160d1>] ? do_drv_read+0x0/0x2f
 [<ffffffff81015fba>] get_cur_val+0xb0/0x102
 [<ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5
 [<ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515
 [<ffffffff81562ce9>] ? __down_write+0xb/0xd
 [<ffffffff8148055e>] cpufreq_add_dev+0x278/0x922

Signed-off-by: David John <davidjon@xenontk.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()
Roland Dreier [Sat, 16 Jan 2010 01:01:22 +0000 (17:01 -0800)]
kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()

Add BUILD_BUG_ON_NOT_POWER_OF_2()

When code relies on a constant being a power of 2:

#define FOO 512 /* must be a power of 2 */

it would be nice to be able to do:

BUILD_BUG_ON(!is_power_of_2(FOO));

However applying an inline function does not result in a compile-time
constant that can be used with BUILD_BUG_ON(), so trying that gives
results in:

error: bit-field '<anonymous>' width not an integer constant

As suggested by akpm, rather than monkeying around with is_power_of_2()
and risking gcc warts about constant expressions, just create a macro
BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: David Dillow <dave@thedillows.org>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/page_alloc: fix the range check for backward merging
Kazuhisa Ichikawa [Sat, 16 Jan 2010 01:01:20 +0000 (17:01 -0800)]
mm/page_alloc: fix the range check for backward merging

The current check for 'backward merging' within add_active_range() does
not seem correct.  start_pfn must be compared against
early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether
the new region is backward-mergeable with the existing range.

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: document everywhere that size has to be power of two
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: document everywhere that size has to be power of two

On my first try using them I missed that the fifos need to be power of
two, resulting in a runtime bug.  Document that requirement everywhere
(and fix one grammar bug)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: add kfifo_initialized
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: add kfifo_initialized

Simple inline that checks if kfifo_init() has been executed on a fifo.

This is useful for walking all per CPU fifos, when some of them might not
have been brought up yet.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: add kfifo_out_peek
Andi Kleen [Sat, 16 Jan 2010 01:01:16 +0000 (17:01 -0800)]
kfifo: add kfifo_out_peek

In some upcoming code it's useful to peek into a FIFO without permanentely
removing data.  This patch implements a new kfifo_out_peek() to do this.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: sanitize *_user error handling
Andi Kleen [Sat, 16 Jan 2010 01:01:15 +0000 (17:01 -0800)]
kfifo: sanitize *_user error handling

Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data.  The problem
is that both conditions are multiplexed into the same return code.

Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.

I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)

I would appreciate some double checking if I did all the conversions
correctly.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: use void * pointers for user buffers
Andi Kleen [Sat, 16 Jan 2010 01:01:12 +0000 (17:01 -0800)]
kfifo: use void * pointers for user buffers

The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers.  Use void *
instead.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotty.h: make tty_port_get() static inline
Randy Dunlap [Sat, 16 Jan 2010 01:01:11 +0000 (17:01 -0800)]
tty.h: make tty_port_get() static inline

I get a few dozen of these warnings when using
  gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):

In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static

so make the function static inline.

[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoedac: i5000_edac critical fix panic out of bounds
Tamas Vincze [Sat, 16 Jan 2010 01:01:10 +0000 (17:01 -0800)]
edac: i5000_edac critical fix panic out of bounds

EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Kernel panic - not syncing: EDAC MC0: Uncorrected Error  (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.

This happens because FERR_NF_FBD bit 28 is not updated on i5000.  Due to
that, both bits 28 and 29 may be equal to one, returning channel = 3.  As
this value is invalid, EDAC core generates the panic.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568

Signed-off-by: Tamas Vincze <tom@vincze.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agom68knommu: fix invalid flags on coldfire pit clocksource
john stultz [Sat, 16 Jan 2010 01:01:09 +0000 (17:01 -0800)]
m68knommu: fix invalid flags on coldfire pit clocksource

The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource.  Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.

This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource.  This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Steven King <sfking@fdwdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoserial/8250_pnp: add a new Fujitsu Wacom Tablet PC device
Ping [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
serial/8250_pnp: add a new Fujitsu Wacom Tablet PC device

This is a new two finger touch Fujitsu Wacom Tablet PC.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomarkup_oops.pl: fix error with x86
Hui Zhu [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
markup_oops.pl: fix error with x86

When I try to use markup_oops.pl in x86, I always get:

cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found

This is because in line:
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
  $function = $1;
  $func_offset = $2;
  }

$func_offset will get a number like "0x2"

But in follow code:

my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");

It add other ox to ox2.  Then this value will be set to NaN.

So I made a small patch to fix it.

Signed-off-by: Hui Zhu <teawater@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoviafb: fix acceleration for some chips
Erik-Jan Post [Sat, 16 Jan 2010 01:01:06 +0000 (17:01 -0800)]
viafb: fix acceleration for some chips

Fix a regression in hardware acceleration which made the accelerated
framebuffer unusable on some chips.  These need extra initialization and
an extra flag which is no longer needed/available on current chips.

Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoviafb: do modesetting after updating variables
Erik-Jan Post [Sat, 16 Jan 2010 01:01:05 +0000 (17:01 -0800)]
viafb: do modesetting after updating variables

Reorder viafb_set_par to allow using the updated variables in
viafb_setmode.  This fixes a regression that prevented proper runtime mode
changes.

Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoviafb: fix LCD hardware cursor regression
Florian Tobias Schandinat [Sat, 16 Jan 2010 01:01:03 +0000 (17:01 -0800)]
viafb: fix LCD hardware cursor regression

Although I'd consider this a hardware bug, as there is hardware out that
for whatever reason does not support hardware cursors on LCD output we
have to care about it in the driver.  This fixes a regression (invisible
cursor) introduced by:

    viafb: cleanup viafb_cursor

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reported-by: Julian Wollrath <jwollrath@web.de>
Tested-by: Julian Wollrath <jwollrath@web.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: fix kfifo_out_locked race bug
Stefani Seibold [Sat, 16 Jan 2010 01:01:02 +0000 (17:01 -0800)]
kfifo: fix kfifo_out_locked race bug

Fix a wrong optimization in include/linux/kfifo.h which could cause a race
in kfifo_out_locked.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Reported-by: Johan Hovold <jhovold@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoi2c: Do not use device name after device_unregister
Thadeu Lima de Souza Cascardo [Sat, 16 Jan 2010 19:43:13 +0000 (20:43 +0100)]
i2c: Do not use device name after device_unregister

dev_dbg outputs dev_name, which is released with device_unregister. This bug
resulted in output like this:

i2c Xy2�0: adapter [SMBus I801 adapter at 1880] unregistered

The right output would be:
i2c i2c-0: adapter [SMBus I801 adapter at 1880] unregistered

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agoi2c/pca: Don't use *_interruptible
Wolfram Sang [Sat, 16 Jan 2010 19:43:13 +0000 (20:43 +0100)]
i2c/pca: Don't use *_interruptible

Unexpected signals can disturb the bus-handling and lock it up. Don't use
interruptible in 'wait_event_*' and 'wake_*' as in commits
dc1972d02747d2170fb1d78d114801f5ecb27506 (for cpm),
1ab082d7cbd0f34e39a5396cc6340c00bc5d66ef (for mpc),
b7af349b175af45f9d87b3bf3f0a221e1831ed39 (for omap).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agoi2c-ali1563: Remove sparse warnings
Márton Németh [Sat, 16 Jan 2010 19:43:13 +0000 (20:43 +0100)]
i2c-ali1563: Remove sparse warnings

Remove the following sparse warnings (see "make C=1"):
 * drivers/i2c/busses/i2c-ali1563.c:91:3: warning: do-while statement
   is not a compound statement
 * drivers/i2c/busses/i2c-ali1563.c:161:3: warning: do-while statement
   is not a compound statement

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agoi2c: Test off by one in {piix4,vt596}_transaction()
Roel Kluin [Sat, 16 Jan 2010 19:43:12 +0000 (20:43 +0100)]
i2c: Test off by one in {piix4,vt596}_transaction()

With `while (timeout++ < MAX_TIMEOUT)' timeout reaches MAX_TIMEOUT + 1
after the loop. This is probably unlikely to produce a problem.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agoi2c-core: Storage class should be before const qualifier
Tobias Klauser [Sat, 16 Jan 2010 19:43:12 +0000 (20:43 +0100)]
i2c-core: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Sat, 16 Jan 2010 18:44:38 +0000 (10:44 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.

11 years agodo_add_mount() should sanitize mnt_flags
Al Viro [Sat, 16 Jan 2010 18:07:36 +0000 (13:07 -0500)]
do_add_mount() should sanitize mnt_flags

MNT_WRITE_HOLD shouldn't leak into new vfsmount and neither
should MNT_SHARED (the latter will be set properly, along with
the rest of shared-subtree data structures)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoCIFS shouldn't make mountpoints shrinkable
Al Viro [Sat, 16 Jan 2010 18:06:32 +0000 (13:06 -0500)]
CIFS shouldn't make mountpoints shrinkable

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agomnt_flags fixes in do_remount()
Al Viro [Sat, 16 Jan 2010 18:01:26 +0000 (13:01 -0500)]
mnt_flags fixes in do_remount()

* need vfsmount_lock over modifying it
* need to preserve MNT_SHARED/MNT_UNBINDABLE

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>