linux-2.6.git
15 years ago[MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Ralf Baechle [Sat, 7 Oct 2006 18:44:33 +0000 (19:44 +0100)]
[MIPS] Complete fixes after removal of pt_regs argument to int handlers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] Show actual CPU information in /proc/cpuinfo
Karl-Johan Karlsson [Sat, 7 Oct 2006 23:15:02 +0000 (01:15 +0200)]
[MIPS] Show actual CPU information in /proc/cpuinfo

Currently, /proc/cpuinfo contains several copies of the information for
whatever processor we happen to be scheduled on. This patch makes it contain
the proper information for each CPU, which is particularly useful on mixed
R12k/R10k IP27 machines.

Signed-off-by: Karl-Johan Karlsson <creideiki@lysator.liu.se>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] Cobalt: Time runs too quickly
Scott Ashcroft [Fri, 6 Oct 2006 15:54:54 +0000 (16:54 +0100)]
[MIPS] Cobalt: Time runs too quickly

A kernel built with HZ==250 runs about 4 four times too quickly on a
Cobalt RaQ2.

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] Update Malta config.
Ralf Baechle [Fri, 6 Oct 2006 16:36:20 +0000 (17:36 +0100)]
[MIPS] Update Malta config.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Sat, 7 Oct 2006 17:52:00 +0000 (10:52 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] PReP fixup after irq changes
  [POWERPC] SPU fixup after irq changes
  [POWERPC] Fix up after irq changes
  [POWERPC] Fix iseries/smp.c for irq breakage
  [POWERPC] Fix viocons for irq breakage
  [POWERPC] Update iseries_defconfig
  [POWERPC] Fix fsl_soc build breaks
  [POWERPC] Minor fix for bootargs property
  [POWERPC] Update MTFSF_L() comment
  [POWERPC] Update pSeries defconfig for SATA
  [POWERPC] Don't get PCI IRQ from OF for devices with no IRQ
  [POWERPC] Fix zImage decompress location
  [POWERPC] linux,tce-size property is 32 bits
  [POWERPC] Add DTS for MPC8349E-mITX board
  [POWERPC] Fix harmless typo
  [PPC] Fix some irq breakage with ARCH=ppc

15 years ago[PATCH] m32r pt_regs fixes
Al Viro [Sat, 7 Oct 2006 15:29:18 +0000 (16:29 +0100)]
[PATCH] m32r pt_regs fixes

... and now with irq_regs.h not forgotten...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] minimal alpha pt_regs fixes
Al Viro [Sat, 7 Oct 2006 13:17:31 +0000 (14:17 +0100)]
[PATCH] minimal alpha pt_regs fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k pt_regs fixes
Al Viro [Sat, 7 Oct 2006 13:16:45 +0000 (14:16 +0100)]
[PATCH] m68k pt_regs fixes

m68k_handle_int() split in two functions: __m68k_handle_int() takes
pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs
*.

Places where we used to call m68k_handle_int() recursively with the same
pt_regs have simply lost the second argument, the rest is switched to
__m68k_handle_int().

The rest of patch is just dropping pt_regs * where needed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] reiserfs: null pointer dereferencing in reiserfs_read_bitmap_block
Eric Eric Sesterhenn [Sat, 7 Oct 2006 05:19:45 +0000 (22:19 -0700)]
[PATCH] reiserfs: null pointer dereferencing in reiserfs_read_bitmap_block

null pointer dereferencing in reiserfs_read_bitmap_block.

Signed-off-by: Alexander Zarochentsev <zam@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] swsusp: Make userland suspend work on SMP again
Rafael J. Wysocki [Sat, 7 Oct 2006 05:19:44 +0000 (22:19 -0700)]
[PATCH] swsusp: Make userland suspend work on SMP again

Unfortunately one of the recent changes in swsusp has broken the userland
suspend on SMP.  Fix it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] slab: remove wrongly placed BUG_ON
Christoph Lameter [Sat, 7 Oct 2006 05:19:44 +0000 (22:19 -0700)]
[PATCH] slab: remove wrongly placed BUG_ON

Init list is called with a list parameter that is not equal to the
cachep->nodelists entry under NUMA if more than one node exists.  This is
fully legitimatei.  One may want to populate the list fields before
switching nodelist pointers.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[POWERPC] PReP fixup after irq changes
Olaf Hering [Fri, 6 Oct 2006 21:06:48 +0000 (23:06 +0200)]
[POWERPC] PReP fixup after irq changes

Compile fixes for PReP in ARCH=ppc.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] SPU fixup after irq changes
Olaf Hering [Fri, 6 Oct 2006 20:52:16 +0000 (22:52 +0200)]
[POWERPC] SPU fixup after irq changes

Remove struct pt_regs * from remaining spu irq functions.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Fix up after irq changes
Olaf Hering [Sat, 7 Oct 2006 12:08:26 +0000 (22:08 +1000)]
[POWERPC] Fix up after irq changes

Remove struct pt_regs * from all handlers.
Also remove the regs argument from get_irq() functions.
Compile tested with arch/powerpc/config/* and
arch/ppc/configs/prep_defconfig

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agoMerge branch 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6
Linus Torvalds [Sat, 7 Oct 2006 03:12:11 +0000 (20:12 -0700)]
Merge branch 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6

* 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6:
  Build fixes for struct pt_regs removal

15 years agoBuild fixes for struct pt_regs removal
Matthew Wilcox [Sat, 7 Oct 2006 02:47:23 +0000 (20:47 -0600)]
Build fixes for struct pt_regs removal

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
15 years ago[POWERPC] Fix iseries/smp.c for irq breakage
Stephen Rothwell [Fri, 6 Oct 2006 03:55:26 +0000 (13:55 +1000)]
[POWERPC] Fix iseries/smp.c for irq breakage

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Fix viocons for irq breakage
Stephen Rothwell [Fri, 6 Oct 2006 03:54:28 +0000 (13:54 +1000)]
[POWERPC] Fix viocons for irq breakage

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Update iseries_defconfig
Stephen Rothwell [Fri, 6 Oct 2006 03:53:12 +0000 (13:53 +1000)]
[POWERPC] Update iseries_defconfig

This make sure that an iseries_defconfig does not inlude
other platforms.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Fix fsl_soc build breaks
Olof Johansson [Fri, 6 Oct 2006 02:16:48 +0000 (21:16 -0500)]
[POWERPC] Fix fsl_soc build breaks

Hrm, there's no way this ever built at time of merge. There's a missing } and
the wrong type on phy_irq.

Also, another const for get_property().

  CC      arch/powerpc/sysdev/fsl_soc.o
arch/powerpc/sysdev/fsl_soc.c: In function 'fs_enet_of_init':
arch/powerpc/sysdev/fsl_soc.c:625: error: assignment of read-only variable 'phy_irq'
arch/powerpc/sysdev/fsl_soc.c:625: warning: assignment makes integer from pointer without a cast
arch/powerpc/sysdev/fsl_soc.c:661: warning: assignment discards qualifiers from pointer target type
arch/powerpc/sysdev/fsl_soc.c:684: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:687: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:722: warning: ISO C90 forbids mixed declarations and code
arch/powerpc/sysdev/fsl_soc.c:728: error: invalid storage class for function 'cpm_uart_of_init'
arch/powerpc/sysdev/fsl_soc.c:798: error: initializer element is not constant
arch/powerpc/sysdev/fsl_soc.c:798: error: expected declaration or statement at end of input
make[1]: *** [arch/powerpc/sysdev/fsl_soc.o] Error 1

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[PATCH] x86_64 irq_regs fix
Andrew Morton [Fri, 6 Oct 2006 20:28:09 +0000 (13:28 -0700)]
[PATCH] x86_64 irq_regs fix

smp_apic_timer_interrupt() needs to stack the pt_regs* for profile_tick.

If any other of those APIC interrupt handlers want to run get_irq_regs() then
their C entrypoint handlers will need the same treatment.

Cc: Andi Kleen <ak@muc.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoARM: fix up nested irq regs usage
Linus Torvalds [Fri, 6 Oct 2006 20:11:15 +0000 (13:11 -0700)]
ARM: fix up nested irq regs usage

This should fix up the per-cpu irq register pointer if we have nested
hardware interrupts.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] ixp4xxdefconfig arm fixes
Frederik Deweerdt [Fri, 6 Oct 2006 18:58:24 +0000 (18:58 +0000)]
[PATCH] ixp4xxdefconfig arm fixes

With the following patch, the ixp4xxdefconfig builds correctly.  I'll
test some more configs if I get some time.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] fix mesh compile errors after irq changes
Olaf Hering [Fri, 6 Oct 2006 18:53:10 +0000 (20:53 +0200)]
[PATCH] fix mesh compile errors after irq changes

drivers/scsi/mesh.c:469: error: too many arguments to function 'mesh_interrupt'
drivers/scsi/mesh.c:507: error: too many arguments to function 'mesh_interrupt'

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge branch 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa
Linus Torvalds [Fri, 6 Oct 2006 18:35:08 +0000 (11:35 -0700)]
Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.13
  [ALSA] sound/pci/au88x0/au88x0.c: ioremap balanced with iounmap
  [ALSA] Handle file operations during snd_card disconnects using static file->f_op
  [ALSA] emu10k1: Fix outl() in snd_emu10k1_resume_regs()
  [ALSA] Repair snd-usb-usx2y for usb 2.6.18
  [ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
  [ALSA] Dereference after free in snd_hwdep_release()
  [ALSA] Fix memory leak in sound/isa/es18xx.c
  [ALSA] hda-intel - New pci id for Nvidia MCP61
  [ALSA] Add new subdevice ids for hda-intel
  [ALSA] WM9712 fixes for ac97_patch.c
  [ALSA] hda/patch_si3054: new codec vendor IDs

15 years ago[ALSA] version 1.0.13
Jaroslav Kysela [Fri, 6 Oct 2006 18:28:26 +0000 (20:28 +0200)]
[ALSA] version 1.0.13

Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] sound/pci/au88x0/au88x0.c: ioremap balanced with iounmap
Amol Lad [Fri, 6 Oct 2006 14:45:19 +0000 (16:45 +0200)]
[ALSA] sound/pci/au88x0/au88x0.c: ioremap balanced with iounmap

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Handle file operations during snd_card disconnects using static file->f_op
Karsten Wiese [Fri, 6 Oct 2006 14:08:27 +0000 (16:08 +0200)]
[ALSA] Handle file operations during snd_card disconnects using static file->f_op

Alsa used to kmalloc one file->f_op per file per disconnecting snd_card.
This led to oopses sometimes when file->f_op was freed before __fput()
finished.
Patch adds a virtual device for disconnect: VDD.
VDD consists of:
LIST_HEAD(shutdown_files)
    protected by DEFINE_SPINLOCK(shutdown_mutex)
static struct file_operations snd_shutdown_f_ops
    and functions assigned to it
Additions to struct snd_monitor_file
    to specify if instance is hidden by VDD or not.
A VDD's instance is
created in snd_card_disconnect() under the card->files_lock.
cleaned up in snd_card_file_remove() under the card->files_lock.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] emu10k1: Fix outl() in snd_emu10k1_resume_regs()
Arnaud Patard [Wed, 4 Oct 2006 16:21:05 +0000 (18:21 +0200)]
[ALSA] emu10k1: Fix outl() in snd_emu10k1_resume_regs()

The emu10k1 driver saves the A_IOCFG and HCFG register on suspend and restores
it on resumes. Unfortunately, this doesn't work as the arguments to outl() are
reversed.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Repair snd-usb-usx2y for usb 2.6.18
Karsten Wiese [Wed, 4 Oct 2006 15:17:32 +0000 (17:17 +0200)]
[ALSA] Repair snd-usb-usx2y for usb 2.6.18

urb->start_frame rolls over beyond MAX_INT now.
This is for stable kernel and stable alsa.

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
Karsten Wiese [Wed, 4 Oct 2006 15:16:46 +0000 (17:16 +0200)]
[ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()

Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
substream can be NULL......
in mainline, bug was introduced by:
2006-06-22  [ALSA] Add O_APPEND flag support to PCM

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Dereference after free in snd_hwdep_release()
Florin Malita [Fri, 29 Sep 2006 10:55:25 +0000 (12:55 +0200)]
[ALSA] Dereference after free in snd_hwdep_release()

snd_card_file_remove() may free hw->card so we can't dereference
hw->card->module after that.
Coverity ID 1420.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Fix memory leak in sound/isa/es18xx.c
Eric Sesterhenn [Thu, 28 Sep 2006 10:35:48 +0000 (12:35 +0200)]
[ALSA] Fix memory leak in sound/isa/es18xx.c

Fixed a memory leak in the error patch.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] hda-intel - New pci id for Nvidia MCP61
Dan Cyr [Tue, 26 Sep 2006 13:32:35 +0000 (15:32 +0200)]
[ALSA] hda-intel - New pci id for Nvidia MCP61

Added the new PCI id to support Nvidia MCP61 in snd-hda-intel driver.

Signed-off-by: Dan Cyr <rabidfly@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] Add new subdevice ids for hda-intel
Tobin Davis [Tue, 26 Sep 2006 13:30:10 +0000 (15:30 +0200)]
[ALSA] Add new subdevice ids for hda-intel

This patch adds a couple of device ids for Acer laptops.  In both cases,
the owners got the driver working by adding 'model=acer' to their
modprobe.conf files.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] WM9712 fixes for ac97_patch.c
Luke Zhang [Tue, 26 Sep 2006 13:28:41 +0000 (15:28 +0200)]
[ALSA] WM9712 fixes for ac97_patch.c

This patch by Luke Zhang fixes a couple of issues with the WM9712
support in ac97_patch.c
Changes:-
 o Fix Out3 ZC switch invert.
 o Extend capture volume control to 6 bits.
 o Change Mic 1 volume mask to 5 bits (31).
 o Add Mic 2 volume.

Signed-off-by: Luke Zhang <lzhang@intrinsyc.com>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[ALSA] hda/patch_si3054: new codec vendor IDs
Sasha Khapyorsky [Tue, 26 Sep 2006 13:27:38 +0000 (15:27 +0200)]
[ALSA] hda/patch_si3054: new codec vendor IDs

There are additional IDs for Si3054 codec based HDA modems. Most of
them were discovered on discuss@linmodems.org list - Thanks to MarvS
and all linmodems.org folks.

Signed-off-by: Sasha Khapyorsky <sashak@alsa-project.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
15 years ago[PATCH] make kernels with CONFIG_X86_GENERIC and !CONFIG_SMP compilable
Jiri Kosina [Fri, 6 Oct 2006 09:11:56 +0000 (11:11 +0200)]
[PATCH] make kernels with CONFIG_X86_GENERIC and !CONFIG_SMP compilable

CONFIG_X86_GENERIC is not exclusively CONFIG_SMP, as mach-default/ could
be compiled also for UP archs. The patch fixes compilation error in
include/asm/mach-summit/mach_apic.h in case CONFIG_X86_GENERIC && !CONFIG_SMP

Signed-off-by: Jiri Kosina <jikos@jikos.cz>
Acked-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 6 Oct 2006 18:08:57 +0000 (11:08 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix breakage from irq change

15 years agoInitial blind fixup for arm for irq changes
Linus Torvalds [Fri, 6 Oct 2006 17:53:39 +0000 (10:53 -0700)]
Initial blind fixup for arm for irq changes

Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[IA64] Fix breakage from irq change
Tony Luck [Fri, 6 Oct 2006 17:09:41 +0000 (10:09 -0700)]
[IA64] Fix breakage from irq change

A few missed spots in ia64-land from this gigantic commit:

7d12e780e003f93433d49ce78cfedf4b4c52adc5

Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 6 Oct 2006 16:13:53 +0000 (09:13 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Use CONFIG_GENERIC_TIME and define TOD clock source.
  [PATCH] sysrq: irq change build fix.
  [S390] irq change build fixes.
  [S390] cio: 0 is a valid chpid.
  [S390] monwriter buffer limit.
  [S390] ap bus poll thread priority.

15 years ago[PATCH] um: irq changes break build
Pekka Enberg [Fri, 6 Oct 2006 07:44:06 +0000 (00:44 -0700)]
[PATCH] um: irq changes break build

Fixup broken UML build due to 7d12e780e003f93433d49ce78cfedf4b4c52adc5
"IRQ: Maintain regs pointer globally rather than passing to IRQ handlers".

Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo "Blaisorblade" Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] knfsd: tidy up up meaning of 'buffer size' in nfsd/sunrpc
NeilBrown [Fri, 6 Oct 2006 07:44:05 +0000 (00:44 -0700)]
[PATCH] knfsd: tidy up up meaning of 'buffer size' in nfsd/sunrpc

There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received.  In
other cases it is the largest 'payload' that can be included in a NFS
message.

In either case, it is not possible for both the request and the reply to be
this large.  One of the request or reply may only be one page long, which
fits nicely with NFS.

So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'.  Max_payload is the size that the server requests.  It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.

max_mesg is the largest single message that can be sent or received.  It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead.  Only one of the request and reply may be
this size.  The other must be at most one page.

Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] md: fix bug where new drives added to an md array sometimes don't sync properly
NeilBrown [Fri, 6 Oct 2006 07:44:04 +0000 (00:44 -0700)]
[PATCH] md: fix bug where new drives added to an md array sometimes don't sync properly

This fixes a bug introduced in 2.6.18.

If a drive is added to a raid1 using older tools (mdadm-1.x or raidtools)
then it will be included in the array without any resync happening.

It has been submitted for 2.6.18.1.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] mmc: multi sector write transfers
Pierre Ossman [Fri, 6 Oct 2006 07:44:03 +0000 (00:44 -0700)]
[PATCH] mmc: multi sector write transfers

SD cards extend the protocol by allowing the host to query a card how many
blocks were successfully stored on the medium.  This allows us to safely write
chunks of blocks at once.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] swarm: Actually initialize the IDE driver
Maciej W. Rozycki [Fri, 6 Oct 2006 07:44:02 +0000 (00:44 -0700)]
[PATCH] swarm: Actually initialize the IDE driver

This is required for the SWARM GenBus IDE interface to be recognized.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] sched: fix a kerneldoc error on is_init()
Henne [Fri, 6 Oct 2006 07:44:01 +0000 (00:44 -0700)]
[PATCH] sched: fix a kerneldoc error on is_init()

Fix a kerneldoc warning and reorderd the description for is_init().

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] MAINTAINERS: take over scx200-* and pc8736* drivers
Jim Cromie [Fri, 6 Oct 2006 07:43:59 +0000 (00:43 -0700)]
[PATCH] MAINTAINERS: take over scx200-* and pc8736* drivers

Add MAINTAINERS entries for new scx200_hrt and pc8736x_gpio drivers, and
take over maintenance of scx200_gpio, authored by Christer Weinigel (which
I've hacked at), who no longer has the hardware.

Also take over hwmon/pc87360, authored by Jean Delvare, who's dropped
maintenance to dedicate more time to hwmon subsystem.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Christer Weinigel <christer@weinigel.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] Fix typo in "syntax error if percpu macros are incorrectly used" patch
Jan Blunck [Fri, 6 Oct 2006 07:43:58 +0000 (00:43 -0700)]
[PATCH] Fix typo in "syntax error if percpu macros are incorrectly used" patch

Trivial typo fix in the "syntax error if percpu macros are incorrectly
used" patch.  I misspelled "identifier" in all places.  D'Oh!

Thanks to Dirk Mueller to point this out.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k: dma_alloc_coherent() has gfp_t as the last argument
Al Viro [Fri, 6 Oct 2006 07:43:58 +0000 (00:43 -0700)]
[PATCH] m68k: dma_alloc_coherent() has gfp_t as the last argument

annotate, fix the bogus argument of vmap() in it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k: fix NBPG define
Roman Zippel [Fri, 6 Oct 2006 07:43:57 +0000 (00:43 -0700)]
[PATCH] m68k: fix NBPG define

The recent header cleanup removed PAGE_SIZE from the exported information as
it depends on the configuration.

BTW This has possibly other consequences, as the core dump code is using
PAGE_SIZE directly, which may need fixing as well.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k: small system.h cleanup
Roman Zippel [Fri, 6 Oct 2006 07:43:56 +0000 (00:43 -0700)]
[PATCH] m68k: small system.h cleanup

avoid unnecessary xchg() use in set_mb()

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k: fix typo in __generic_copy_to_user
Roman Zippel [Fri, 6 Oct 2006 07:43:56 +0000 (00:43 -0700)]
[PATCH] m68k: fix typo in __generic_copy_to_user

Jump to the correct exit label after exception

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68k: cleanup string functions
Roman Zippel [Fri, 6 Oct 2006 07:43:55 +0000 (00:43 -0700)]
[PATCH] m68k: cleanup string functions

- cleanup asm of string functions
- deinline strncat()/strncmp()
- provide non-inlined strcpy()

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] provide tickadj define
Roman Zippel [Fri, 6 Oct 2006 07:43:54 +0000 (00:43 -0700)]
[PATCH] provide tickadj define

Provide a tickadj compatibility define for archs still using it.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] page fault retry with NOPAGE_REFAULT
Benjamin Herrenschmidt [Fri, 6 Oct 2006 07:43:53 +0000 (00:43 -0700)]
[PATCH] page fault retry with NOPAGE_REFAULT

Add a way for a no_page() handler to request a retry of the faulting
instruction.  It goes back to userland on page faults and just tries again
in get_user_pages().  I added a cond_resched() in the loop in that later
case.

The problem I have with signal and spufs is an actual bug affecting apps and I
don't see other ways of fixing it.

In addition, we are having issues with infiniband and 64k pages (related to
the way the hypervisor deals with some HV cards) that will require us to muck
around with the MMU from within the IB driver's no_page() (it's a pSeries
specific driver) and return to the caller the same way using NOPAGE_REFAULT.

And to add to this, the graphics folks have been following a new approach of
memory management that involves transparently swapping objects between video
ram and main meory.  To do that, they need installing PTEs from a no_page()
handler as well and that also requires returning with NOPAGE_REFAULT.

(For the later, they are currently using io_remap_pfn_range to install one PTE
from no_page() which is a bit racy, we need to add a check for the PTE having
already been installed afer taking the lock, but that's ok, they are only at
the proof-of-concept stage.  I'll send a patch adding a "clean" function to do
that, we can use that from spufs too and get rid of the sparsemem hacks we do
to create struct page for SPEs.  Basically, that provides a generic solution
for being able to have no_page() map hardware devices, which is something that
I think sound driver folks have been asking for some time too).

All of these things depend on having the NOPAGE_REFAULT exit path from
no_page() handlers.

Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] slab: reduce numa text size
Pekka Enberg [Fri, 6 Oct 2006 07:43:52 +0000 (00:43 -0700)]
[PATCH] slab: reduce numa text size

Reduce the NUMA text size of mm/slab.o a little on x86 by using a local
variable to store the result of numa_node_id().

    text    data     bss     dec     hex filename
   16858    2584      16   19458    4c02 mm/slab.o (before)
   16804    2584      16   19404    4bcc mm/slab.o (after)

[akpm@osdl.org: use better names]
[pbadari@us.ibm.com: fix that]
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] ohci: don't play with IRQ regs
David Brownell [Fri, 6 Oct 2006 07:43:51 +0000 (00:43 -0700)]
[PATCH] ohci: don't play with IRQ regs

This is a more correct fix for the way the ohci hcd was referencing pt_regs
in the unlink paths.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] irq_reqs: export __irq_regs
Andrew Morton [Fri, 6 Oct 2006 07:43:50 +0000 (00:43 -0700)]
[PATCH] irq_reqs: export __irq_regs

Modules might want this.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] Fix WARN_ON / WARN_ON_ONCE regression
Andrew Morton [Fri, 6 Oct 2006 07:43:49 +0000 (00:43 -0700)]
[PATCH] Fix WARN_ON / WARN_ON_ONCE regression

Tim and Ananiev report that the recent WARN_ON_ONCE changes cause increased
cache misses with the tbench workload.  Apparently due to the access to the
newly-added static variable.

Rearrange the code so that we don't touch that variable unless the warning is
going to trigger.

Also rework the logic so that the static variable starts out at zero, so we
can move it into bss.

It would seem logical to mark the static variable as __read_mostly too.  But
it would be wrong, because that would put it back into the vmlinux image, and
the kernel will never read from this variable in normal operation anyway.
Unless the compiler or hardware go and do some prefetching on us?

For some reason this patch shrinks softirq.o text by 40 bytes.

Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Ananiev, Leonid I" <leonid.i.ananiev@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] kauditd_thread warning fix
Andrew Morton [Fri, 6 Oct 2006 07:43:48 +0000 (00:43 -0700)]
[PATCH] kauditd_thread warning fix

Squash this warning:

  kernel/audit.c: In function 'kauditd_thread':
  kernel/audit.c:367: warning: no return statement in function returning non-void

We might as test kthread_should_stop(), although it's not very pointful at
present.

The code which starts this thread looks racy - the kernel could start multiple
threads.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] i386: irqs build fix
Andrew Morton [Fri, 6 Oct 2006 07:43:48 +0000 (00:43 -0700)]
[PATCH] i386: irqs build fix

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[S390] Use CONFIG_GENERIC_TIME and define TOD clock source.
Martin Schwidefsky [Fri, 6 Oct 2006 14:38:48 +0000 (16:38 +0200)]
[S390] Use CONFIG_GENERIC_TIME and define TOD clock source.

Fix too slow clock by using CONFIG_GENERIC_TIME and adding a
clock source for the s390 time-of-day clock. As added benefit
we get rid of the s390 specific definition of do_gettimeofday
and do_settimeofday.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[PATCH] sysrq: irq change build fix.
Heiko Carstens [Fri, 6 Oct 2006 14:38:42 +0000 (16:38 +0200)]
[PATCH] sysrq: irq change build fix.

drivers/char/sysrq.c: In function `sysrq_handle_crashdump':
drivers/char/sysrq.c:98: warning: implicit declaration of function `get_irq_regs'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] irq change build fixes.
Heiko Carstens [Fri, 6 Oct 2006 14:38:35 +0000 (16:38 +0200)]
[S390] irq change build fixes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] cio: 0 is a valid chpid.
Cornelia Huck [Fri, 6 Oct 2006 14:38:29 +0000 (16:38 +0200)]
[S390] cio: 0 is a valid chpid.

In order to determine chpid validity, we need to check whether the
corresponding path is specified in the pim.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] monwriter buffer limit.
Melissa Howland [Fri, 6 Oct 2006 14:38:26 +0000 (16:38 +0200)]
[S390] monwriter buffer limit.

Make max_bufs a global (per linux guest) limit.

Signed-off-by: Melissa Howland <melissah@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] ap bus poll thread priority.
Christian Borntraeger [Fri, 6 Oct 2006 14:38:22 +0000 (16:38 +0200)]
[S390] ap bus poll thread priority.

The ap bus is supposed to have a low priority. We must use 19 instead
of -20, which is just the opposite.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[POWERPC] Minor fix for bootargs property
Geoff Levand [Thu, 5 Oct 2006 18:35:16 +0000 (11:35 -0700)]
[POWERPC] Minor fix for bootargs property

Avoid the use of an uninitialized stack variable when the powerpc device tree
bootargs property is either missing or incorrectly defined.  This also makes
CONFIG_CMDLINE work properly under these conditions.  This change adds a test
for the existence of the bootargs property.

early_init_dt_scan_chosen() tests for a zero length bootargs property in its
CONFIG_CMDLINE processing, but the current implementation of
of_get_flat_dt_prop() doesn't assign a value to the length when no property is
found.  Since an automatic variable is used, a stale value from the stack will
be used in the test.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Update MTFSF_L() comment
Anton Blanchard [Thu, 5 Oct 2006 16:54:07 +0000 (02:54 +1000)]
[POWERPC] Update MTFSF_L() comment

David Woodhouse points out that the comment accompanying the MTFSF_L
macro is misleading. We should make it clear that the L bit is ignored
on older CPUS, not the entire instruction.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Update pSeries defconfig for SATA
Brian King [Thu, 5 Oct 2006 15:52:04 +0000 (10:52 -0500)]
[POWERPC] Update pSeries defconfig for SATA

Since the ipr driver now supports SATA and depends on libata,
enable libata to get built.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Don't get PCI IRQ from OF for devices with no IRQ
Benjamin Herrenschmidt [Thu, 5 Oct 2006 06:40:41 +0000 (16:40 +1000)]
[POWERPC] Don't get PCI IRQ from OF for devices with no IRQ

This patch adds checking of the PCI_INTERRUPT_PIN register before
using standard OF parsing to retreive PCI interrupts. The reason is
that some PCI devices may have no PCI interrupt, though they may have
interrupts attached via other means. In this case, we shall not use
irq->pdev, but device-specific code can later retreive those interrupts
instead.

Without that patch, Maple and derivatives don't get the right interrupt
for the second IDE channel as the linux IDE code fallsback to the PCI
irq instead of trying to use the legacy ones for the on-board controller
(which has no PCI_INTERRUPT_PIN). Having no PCI IRQ assign to it (as it
doesn't request any) fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Fix zImage decompress location
Benjamin Herrenschmidt [Thu, 5 Oct 2006 04:18:46 +0000 (14:18 +1000)]
[POWERPC] Fix zImage decompress location

The zImage wrapper has a "hack" that force the decompression to happen
above 20Mb for 64 bits kernels, to work around issues with some
firmwares on the field. However, the new wrapper has a bug which makes
that hack not work properly. This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] linux,tce-size property is 32 bits
Nathan Lynch [Thu, 5 Oct 2006 03:28:00 +0000 (22:28 -0500)]
[POWERPC] linux,tce-size property is 32 bits

The "linux,tce-size" property is only 32 bits (see
prom_initialize_tce_table() in arch/powerpc/kernel/prom_init.c).
Treating it as an unsigned long in iommu_table_setparms() leads to
access beyond the end of the property's buffer, so we pass garbage to
the memset() in that function.

[boot]0020 XICS Init
i8259 legacy interrupt controller initialized
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 32768 bytes)
cpu 0x0: Vector: 300 (Data Access) at [c0000000fe783850]
    pc: c000000000035e90: .memset+0x60/0xfc
    lr: c000000000044fa4: .iommu_table_setparms+0xb0/0x158
    sp: c0000000fe783ad0
   msr: 9000000000009032
   dar: c000000100000000
 dsisr: 42010000
  current = 0xc00000000450e810
  paca    = 0xc000000000411580
    pid   = 1, comm = swapper
enter ? for help
[link register   ] c000000000044fa4 .iommu_table_setparms+0xb0/0x158
[c0000000fe783ad0c000000000044f4c .iommu_table_setparms+0x58/0x158
(unreliable)
[c0000000fe783b70c00000000004529c
.iommu_bus_setup_pSeries+0x1c4/0x254
[c0000000fe783c00c00000000002b8ac .do_bus_setup+0x3c/0xe4
[c0000000fe783c80c00000000002c924 .pcibios_fixup_bus+0x64/0xd8
[c0000000fe783d00c0000000001a2d5c .pci_scan_child_bus+0x6c/0x10c
[c0000000fe783da0c00000000002be28 .scan_phb+0x17c/0x1b4
[c0000000fe783e40c0000000003cfa00 .pcibios_init+0x58/0x19c
[c0000000fe783ec0c0000000000094b4 .init+0x1e8/0x3d8
[c0000000fe783f90c000000000026e54 .kernel_thread+0x4c/0x68

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Add DTS for MPC8349E-mITX board
Timur Tabi [Wed, 4 Oct 2006 16:03:44 +0000 (11:03 -0500)]
[POWERPC] Add DTS for MPC8349E-mITX board

Add the DTS for the Freescale MPC 8349E-mITX reference board.  Contact
Vitesse for the driver for the VSC 7385.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[POWERPC] Fix harmless typo
Nick Piggin [Wed, 4 Oct 2006 15:25:44 +0000 (17:25 +0200)]
[POWERPC] Fix harmless typo

Fix a typo. Noticed by the unlikely profiler.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[PPC] Fix some irq breakage with ARCH=ppc
Paul Mackerras [Fri, 6 Oct 2006 11:09:40 +0000 (21:09 +1000)]
[PPC] Fix some irq breakage with ARCH=ppc

Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years ago[PATCH] powerpc: irq change build breaks
Olof Johansson [Fri, 6 Oct 2006 01:31:10 +0000 (20:31 -0500)]
[PATCH] powerpc: irq change build breaks

Fix up some of the buildbreaks from the irq handler changes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge git://git.infradead.org/~dhowells/irq-2.6
Linus Torvalds [Thu, 5 Oct 2006 23:32:01 +0000 (16:32 -0700)]
Merge git://git.infradead.org/~dhowells/irq-2.6

* git://git.infradead.org/~dhowells/irq-2.6:
  IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
  IRQ: Typedef the IRQ handler function type
  IRQ: Typedef the IRQ flow handler function type

15 years ago[PATCH] UDF: Fix mounting read-write
Peter Osterlund [Thu, 5 Oct 2006 19:17:50 +0000 (21:17 +0200)]
[PATCH] UDF: Fix mounting read-write

The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.

Signed-off-by: Peter Osterlund <petero2@telia.com>
[ Duh! ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] x86-64: Fix compilation without CONFIG_KALLSYMS
Randy Dunlap [Thu, 5 Oct 2006 17:07:26 +0000 (19:07 +0200)]
[PATCH] x86-64: Fix compilation without CONFIG_KALLSYMS

Include linux/kallsyms.h unconditionally for print_symbol().

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
Linus Torvalds [Thu, 5 Oct 2006 22:51:43 +0000 (15:51 -0700)]
Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] i386: fix rwsem build bug on CONFIG_M386=y
  [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers
  [PATCH] x86-64: Fix FPU corruption
  [PATCH] x86: Terminate the kernel stacks for the unwinder
  [PATCH] i386: Fix PCI BIOS config space access
  [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex
  [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info
  [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location
  [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

[ Manually skipped commits that incorrectly ignored AC in kernel space.
  The alignment fault is defined to only happen for CPL3 anyway  - Linus ]

15 years ago[PATCH] fix qla{2,4} build error
Frederik Deweerdt [Thu, 5 Oct 2006 20:49:18 +0000 (20:49 +0000)]
[PATCH] fix qla{2,4} build error

commit 0181944fe647cae18d545ac1167df3d15d393701 adds a
'extended_error_logging' global variable to qla2xxx which is defined by
qla4xxx too.

Trying to build both drivers results in the following error:

  LD      drivers/scsi/built-in.o
  drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
  drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging'
  drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
  first defined here
  make[2]: *** [drivers/scsi/built-in.o] Error 1
  make[1]: *** [drivers/scsi] Error 2
  make: *** [drivers] Error 2

The following patch simply adds a qla2_ (qla4_ respectively) prefix to
the variable name.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] i386: fix rwsem build bug on CONFIG_M386=y
Ingo Molnar [Thu, 5 Oct 2006 16:47:22 +0000 (18:47 +0200)]
[PATCH] i386: fix rwsem build bug on CONFIG_M386=y

CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the
semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.

Reported-by: Klaus Knopper <knopper@knopper.net>
Triaged-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers
Andi Kleen [Thu, 5 Oct 2006 16:47:22 +0000 (18:47 +0200)]
[PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers

Add correct CFI annotation to the backlink on top of the interrupt stack.

Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Fix FPU corruption
Andi Kleen [Thu, 5 Oct 2006 16:47:22 +0000 (18:47 +0200)]
[PATCH] x86-64: Fix FPU corruption

This reverts an earlier patch that was found to cause FPU
state corruption. I think the corruption happens because
unlazy_fpu() can cause FPU exceptions and when it happens
after the current switch some processing would affect
the state in the wrong process.

Thanks to  Douglas Crosher and Tom Hughes for testing.

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86: Terminate the kernel stacks for the unwinder
Andi Kleen [Thu, 5 Oct 2006 16:47:22 +0000 (18:47 +0200)]
[PATCH] x86: Terminate the kernel stacks for the unwinder

Always make sure RIP/EIP is 0 in the registers stored on the top
of the stack of a kernel thread. This makes sure the unwinder code
won't try a fallback but knows the stack has ended.

AK: this patch is a bit mysterious. in theory they should be terminated
anyways, but it seems to fix at least one crash. Anyways double termination
probably doesn't hurt.

Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] i386: Fix PCI BIOS config space access
Andi Kleen [Thu, 5 Oct 2006 16:47:22 +0000 (18:47 +0200)]
[PATCH] i386: Fix PCI BIOS config space access

Got broken by a earlier change.

Also add a printk when no pci config method could be found.

Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex
Jon Mason [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex

Make the references to the bus number in hex instead of decimal, as
that is the way that lspci prints out the bus numbers.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Calgary IOMMU: Update Jon's contact info
Jon Mason [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] x86-64: Calgary IOMMU: Update Jon's contact info

Also add copyright for work done after leaving IBM.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location
Jon Mason [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location

The purpose of the code being modified is to determine the location
of the calgary chip address space.  This is done by a magical formula
of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to
find the offset where BIOS puts it.  In this formula,
OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is
always 2 or 3 depending on which chip in the system it is.  The
problem was that we had an off by one error that caused us to account
some busses to the wrong chip and thus give them the wrong address
space.

Fixes RH bugzilla #203971.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-bu: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init
Jon Mason [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init

calgary_init's for loop does not correspond to the actual device being
checked, which makes its upperbound check for array overflow useless.
Changing this to a do-while loop is the correct way of doing this.
There should be no possibility of spinning forever in this loop, as
pci_get_device states that it will go through all iterations, then
return NULL (thus breaking the loop).

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] i386: Update defconfig
Andi Kleen [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] i386: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
15 years ago[PATCH] x86-64: Update defconfig
Andi Kleen [Thu, 5 Oct 2006 16:47:21 +0000 (18:47 +0200)]
[PATCH] x86-64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
15 years agoIRQ: Maintain regs pointer globally rather than passing to IRQ handlers
David Howells [Thu, 5 Oct 2006 13:55:46 +0000 (14:55 +0100)]
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

15 years agoIRQ: Typedef the IRQ handler function type
David Howells [Thu, 5 Oct 2006 12:06:34 +0000 (13:06 +0100)]
IRQ: Typedef the IRQ handler function type

Typedef the IRQ handler function type.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)

15 years agoIRQ: Typedef the IRQ flow handler function type
David Howells [Thu, 5 Oct 2006 12:06:34 +0000 (13:06 +0100)]
IRQ: Typedef the IRQ flow handler function type

Typedef the IRQ flow handler function type.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)

15 years agoLinux 2.6.19-rc1
Linus Torvalds [Thu, 5 Oct 2006 02:57:05 +0000 (19:57 -0700)]
Linux 2.6.19-rc1

Merge window closed..

15 years ago[PATCH] itmtouch: fix inverted flag to indicate touch location correctly, correct...
Mark Assad [Thu, 5 Oct 2006 02:25:05 +0000 (12:25 +1000)]
[PATCH] itmtouch: fix inverted flag to indicate touch location correctly, correct white space

There is a bug in the current version of the itmtouch USB touchscreen
driver.  The if statment that checks if pressure is being applied to the
touch screen is now missing a ! (not), so events are no longer being
reported correctly.

The original source code for this line was as follows:

#define UCP(x) ((unsigned char*)(x))
#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))

...
if (!UCOM(urb, 7, 0x20)) {

And was cleaned to:

unsigned char *data = urb->transfer_buffer;
....
 if (data[7] & 0x20) {

(note the lack of '!')

This has been tested on an LG L1510BF and an LG1510SF touch screen.

Signed-off-by: Mark Assad <massad@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>