12 years agoV4L/DVB: dvb-core: fix initialization of feeds list in demux filter
Francesco Lavra [Sun, 7 Feb 2010 12:49:58 +0000 (09:49 -0300)]
V4L/DVB: dvb-core: fix initialization of feeds list in demux filter

A DVB demultiplexer device can be used to set up either a PES filter or
a section filter. In the former case, the ts field of the feed union of
struct dmxdev_filter is used, in the latter case the sec field of the
same union is used.
The ts field is a struct list_head, and is currently initialized in the
open() method of the demux device. When for a given demuxer a section
filter is set up, the sec field is played with, thus if a PES filter
needs to be set up after that the ts field will be corrupted, causing a
kernel oops.
This fix moves the list head initialization to
dvb_dmxdev_pes_filter_set(), so that the ts field is properly
initialized every time a PES filter is set up.

Signed-off-by: Francesco Lavra <>
Cc: stable <>
Reviewed-by: Andy Walls <>
Tested-by: hermann pitton <>
Signed-off-by: Mauro Carvalho Chehab <>
12 years agoV4L/DVB: dvb_demux: Don't use vmalloc at dvb_dmx_swfilter_packet
Mauro Carvalho Chehab [Mon, 1 Feb 2010 14:50:42 +0000 (11:50 -0300)]
V4L/DVB: dvb_demux: Don't use vmalloc at dvb_dmx_swfilter_packet

As dvb_dmx_swfilter_packet() is protected by a spinlock, it shouldn't sleep.
However, vmalloc() may call sleep. So, move the initialization of
dvb_demux::cnt_storage field to a better place.

Reviewed-by: Andy Walls <>
Signed-off-by: Mauro Carvalho Chehab <>
12 years agoV4L/DVB: Fix the risk of an oops at dvb_dmx_release
Mauro Carvalho Chehab [Mon, 1 Feb 2010 13:35:22 +0000 (10:35 -0300)]
V4L/DVB: Fix the risk of an oops at dvb_dmx_release

dvb_dmx_init tries to allocate virtual memory for 2 pointers: filter and feed.

If the second vmalloc fails, filter is freed, but the pointer keeps pointing
to the old place. Later, when dvb_dmx_release() is called, it will try to
free an already freed memory, causing an OOPS.

Reviewed-by: Andy Walls <>
Signed-off-by: Mauro Carvalho Chehab <>
12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Sun, 7 Feb 2010 19:18:28 +0000 (11:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://
  Take ima_file_free() to proper place.
  ima: rename PATH_CHECK to FILE_CHECK
  ima: rename ima_path_check to ima_file_check
  ima: initialize ima before inodes can be allocated
  fix ima breakage
  Take ima_path_check() in nfsd past dentry_open() in nfsd_open()
  freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb
  befs: fix leak

12 years agoFix race in tty_fasync() properly
Linus Torvalds [Sun, 7 Feb 2010 18:11:23 +0000 (10:11 -0800)]
Fix race in tty_fasync() properly

This reverts commit 703625118069 ("tty: fix race in tty_fasync") and
commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/
restore") that tried to fix up some of the fallout but was incomplete.

It turns out that we really cannot hold 'tty->ctrl_lock' over calling
__f_setown, because not only did that cause problems with interrupt
disables (which the second commit fixed), it also causes a potential
ABBA deadlock due to lock ordering.

Thanks to Tetsuo Handa for following up on the issue, and running
lockdep to show the problem.  It goes roughly like this:

 - f_getown gets filp->f_owner.lock for reading without interrupts
   disabled, so an interrupt that happens while that lock is held can
   cause a lockdep chain from f_owner.lock -> sighand->siglock.

 - at the same time, the tty->ctrl_lock -> f_owner.lock chain that
   commit 703625118069 introduced, together with the pre-existing
   sighand->siglock -> tty->ctrl_lock chain means that we have a lock
   dependency the other way too.

So instead of extending tty->ctrl_lock over the whole __f_setown() call,
we now just take a reference to the 'pid' structure while holding the
lock, and then release it after having done the __f_setown.  That still
guarantees that 'struct pid' won't go away from under us, which is all
we really ever needed.

Reported-and-tested-by: Tetsuo Handa <>
Acked-by: Greg Kroah-Hartman <>
Acked-by: Américo Wang <>
Signed-off-by: Linus Torvalds <>
12 years agoTake ima_file_free() to proper place.
Al Viro [Sun, 7 Feb 2010 08:07:29 +0000 (03:07 -0500)]
Take ima_file_free() to proper place.

Hooks: Just Say No.

Signed-off-by: Al Viro <>
12 years agoima: rename PATH_CHECK to FILE_CHECK
Mimi Zohar [Tue, 26 Jan 2010 22:02:41 +0000 (17:02 -0500)]
ima: rename PATH_CHECK to FILE_CHECK

With the movement of the ima hooks functions were renamed from *path* to
*file* since they always deal with struct file.  This patch renames some of
the ima internal flags to make them consistent with the rest of the code.

Signed-off-by: Mimi Zohar <>
Signed-off-by: Eric Paris <>
Signed-off-by: Al Viro <>
12 years agoima: rename ima_path_check to ima_file_check
Mimi Zohar [Tue, 26 Jan 2010 22:02:40 +0000 (17:02 -0500)]
ima: rename ima_path_check to ima_file_check

ima_path_check actually deals with files!  call it ima_file_check instead.

Signed-off-by: Eric Paris <>
Acked-by: Mimi Zohar <>
Signed-off-by: Al Viro <>
12 years agoima: initialize ima before inodes can be allocated
Eric Paris [Wed, 9 Dec 2009 20:29:01 +0000 (15:29 -0500)]
ima: initialize ima before inodes can be allocated

ima wants to create an inode information struct (iint) when inodes are
allocated.  This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created.  To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function.  Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().

Signed-off-by: Eric Paris <>
Acked-by: Mimi Zohar <>
Signed-off-by: Al Viro <>
12 years agofix ima breakage
Mimi Zohar [Wed, 20 Jan 2010 20:35:41 +0000 (15:35 -0500)]
fix ima breakage

The "Untangling ima mess, part 2 with counters" patch messed
up the counters.  Based on conversations with Al Viro, this patch
streamlines ima_path_check() by removing the counter maintaince.
The counters are now updated independently, from measuring the file,
in __dentry_open() and alloc_file() by calling ima_counts_get().
ima_path_check() is called from nfsd and do_filp_open().
It also did not measure all files that should have been measured.
Reason: ima_path_check() got bogus value passed as mask.
[AV: mea culpa]
[AV: add missing nfsd bits]

Signed-off-by: Mimi Zohar <>
Signed-off-by: Al Viro <>
12 years agoTake ima_path_check() in nfsd past dentry_open() in nfsd_open()
Al Viro [Tue, 26 Jan 2010 10:43:08 +0000 (05:43 -0500)]
Take ima_path_check() in nfsd past dentry_open() in nfsd_open()

Signed-off-by: Al Viro <>
12 years agofreeze_bdev: don't deactivate successfully frozen MS_RDONLY sb
Jun'ichi Nomura [Fri, 29 Jan 2010 00:56:22 +0000 (09:56 +0900)]
freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb

Thanks Thomas and Christoph for testing and review.
I removed 'smp_wmb()' before up_write from the previous patch,
since up_write() should have necessary ordering constraints.
(I.e. the change of s_frozen is visible to others after up_write)
I'm quite sure the change is harmless but if you are uncomfortable
with Tested-by/Reviewed-by on the modified patch, please remove them.

If MS_RDONLY, freeze_bdev should just up_write(s_umount) instead of
Also, keep sb->s_frozen consistent so that remount can check the frozen state.

Otherwise a crash reported here can happen:

This patch should be applied for 2.6.32 stable series, too.

Reviewed-by: Christoph Hellwig <>
Tested-by: Thomas Backlund <>
Signed-off-by: Jun'ichi Nomura <>
Signed-off-by: Al Viro <>
12 years agobefs: fix leak
Al Viro [Fri, 29 Jan 2010 03:11:38 +0000 (22:11 -0500)]
befs: fix leak

Signed-off-by: Al Viro <>
12 years agoLinux 2.6.33-rc7
Linus Torvalds [Sat, 6 Feb 2010 22:17:12 +0000 (14:17 -0800)]
Linux 2.6.33-rc7

12 years agoMerge branch 'hwmon-for-linus' of git://
Linus Torvalds [Sat, 6 Feb 2010 21:02:31 +0000 (13:02 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://
  hwmon: (w83781d) Request I/O ports individually for probing
  hwmon: (lm78) Request I/O ports individually for probing
  hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT

12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Sat, 6 Feb 2010 21:01:39 +0000 (13:01 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://
  drm/i915: Fix leak of relocs along do_execbuffer error path
  drm/i915: slow acpi_lid_open() causes flickering - V2
  drm/i915: Disable SR when more than one pipe is enabled
  drm/i915: page flip support for Ironlake
  drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop
  drm/i915: Add support for SDVO composite TV
  drm/i915: don't trigger ironlake vblank interrupt at irq install
  drm/i915: handle non-flip pending case when unpinning the scanout buffer
  drm/i915: Fix the device info of Pineview
  drm/i915: enable vblank interrupt on ironlake
  drm/i915: Prevent use of uninitialized pointers along error path.
  drm/i915: disable hotplug detect before Ironlake CRT detect

12 years agoFix potential crash with sys_move_pages
Linus Torvalds [Sat, 6 Feb 2010 00:16:50 +0000 (16:16 -0800)]
Fix potential crash with sys_move_pages

We incorrectly depended on the 'node_state/node_isset()' functions
testing the node range, rather than checking it explicitly.  That's not
reliable, even if it might often happen to work.  So do the proper
explicit test.

Reported-by: Marcus Meissner <>
Acked-and-tested-by: Brice Goglin <>
Acked-by: Hugh Dickins <>
Signed-off-by: Linus Torvalds <>
12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 5 Feb 2010 19:11:34 +0000 (11:11 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://
  ASoC: pandora: Add APLL supply to fix audio output
  ALSA: ice1724 - aureon - fix wm8770 volume offset
  ALSA: cosmetic: make hda intel interrupt name consistent with others
  ALSA: hda - Delay switching to polling mode if an interrupt was missing
  ALSA: ctxfi - fix PTP address initialization

12 years agohwmon: (w83781d) Request I/O ports individually for probing
Jean Delvare [Fri, 5 Feb 2010 18:58:36 +0000 (19:58 +0100)]
hwmon: (w83781d) Request I/O ports individually for probing

Different motherboards have different PNP declarations for
W83781D/W83782D chips. Some declare the whole range of I/O ports (8
ports), some declare only the useful ports (2 ports at offset 5) and
some declare fancy ranges, for example 4 ports at offset 4. To
properly handle all cases, request all ports individually for probing.
After we have determined that we really have a W83781D or W83782D
chip, the useful port range will be requested again, as a single

I did not see a board which needs this yet, but I know of one for lm78
driver and I'd like to keep the logic of these two drivers in sync.

Signed-off-by: Jean Delvare <>
12 years agohwmon: (lm78) Request I/O ports individually for probing
Jean Delvare [Fri, 5 Feb 2010 18:58:36 +0000 (19:58 +0100)]
hwmon: (lm78) Request I/O ports individually for probing

Different motherboards have different PNP declarations for LM78/LM79
chips. Some declare the whole range of I/O ports (8 ports), some
declare only the useful ports (2 ports at offset 5) and some declare
fancy ranges, for example 4 ports at offset 4. To properly handle all
cases, request all ports individually for probing. After we have
determined that we really have an LM78 or LM79 chip, the useful port
range will be requested again, as a single block.

This fixes the driver on the Olivetti M3000 DT 540, at least.

Signed-off-by: Jean Delvare <>
12 years agohwmon: (adt7462) Wrong ADT7462_VOLT_COUNT
Ray Copeland [Fri, 5 Feb 2010 18:58:35 +0000 (19:58 +0100)]
hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT

The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the
for loops that use this as a limit count are of the typical form, "for
(n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages
w/o missing the last one it is necessary for the count to be one greater
than it is.  (Specifically, you will miss the +1.5V 3GPIO input with count
= 12 vs. 13.)

Signed-off-by: Ray Copeland <>
Acked-by: "Darrick J. Wong" <>
Signed-off-by: Jean Delvare <>
12 years agoMerge remote branch 'alsa/fixes' into for-linus
Takashi Iwai [Fri, 5 Feb 2010 18:57:23 +0000 (19:57 +0100)]
Merge remote branch 'alsa/fixes' into for-linus

12 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 5 Feb 2010 18:57:16 +0000 (19:57 +0100)]
Merge branch 'fix/asoc' into for-linus

12 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Fri, 5 Feb 2010 18:56:55 +0000 (19:56 +0100)]
Merge branch 'fix/hda' into for-linus

12 years agoMerge branch 'upstream-linus' of git://
Linus Torvalds [Fri, 5 Feb 2010 15:58:21 +0000 (07:58 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://
  [libata] Call flush_dcache_page after PIO data transfers in libata-sff.c
  ahci: add Acer G725 to broken suspend list
  libata: fix ata_id_logical_per_physical_sectors
  libata-scsi passthru: fix bug which truncated LBA48 return values

12 years agoCS5536: apply pci quirk for BIOS SMBUS bug
Andres Salomon [Fri, 5 Feb 2010 06:42:43 +0000 (01:42 -0500)]
CS5536: apply pci quirk for BIOS SMBUS bug

The new cs5535-* drivers use PCI header config info rather than MSRs to
determine the memory region to use for things like GPIOs and MFGPTs.  As
anticipated, we've run into a buggy BIOS:

[    0.081818] pci 0000:00:14.0: reg 10: [io  0x6000-0x7fff]
[    0.081906] pci 0000:00:14.0: reg 14: [io  0x6100-0x61ff]
[    0.082015] pci 0000:00:14.0: reg 18: [io  0x6200-0x63ff]
[    0.082917] pci 0000:00:14.2: reg 20: [io  0xe000-0xe00f]
[    0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff]
[    0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff]
[    0.088816] PCI: pci_cache_line_size set to 32 bytes
[    0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use
[    0.089052] pci 0000:00:14.0: can't reserve [io  0x6100-0x61ff]

This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge
device's BAR0 to 8k.  In reality, it should be 8 bytes (BAR0 is used for
SMBus stuff).  This quirk checks for an incorrect size, and resets it

Signed-off-by: Andres Salomon <>
Tested-by: Leigh Porter <>
Tested-by: Jens Rottmann <>
Signed-off-by: Linus Torvalds <>
12 years agopercpu: add __percpu for sparse
Stephen Rothwell [Fri, 5 Feb 2010 05:09:11 +0000 (16:09 +1100)]
percpu: add __percpu for sparse

This is to make the annotation of percpu variables during the next merge
window less painfull.

Extracted from a patch by Rusty Russell.

Signed-off-by: Stephen Rothwell <>
Acked-by: Tejun Heo <>
Signed-off-by: Linus Torvalds <>
12 years agoMerge branch 'drm-linus' of git://
Linus Torvalds [Fri, 5 Feb 2010 15:24:01 +0000 (07:24 -0800)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://
  drm/radeon/kms: fix r300 vram width calculations
  drm/radeon/kms: rs400/480 MC setup is different than r300.
  drm/radeon/kms: make initial state of load detect property correct.
  drm/radeon/kms: disable HDMI audio for now on rv710/rv730
  drm/radeon/kms: don't call suspend path before cleaning up GPU
  drivers/gpu/drm/radeon/radeon_combios.c: fix warning
  ati_pcigart: fix printk format warning
  drm/r100/kms: Emit cache flush to the end of command buffer. (v2)
  drm/radeon/kms: fix regression rendering issue on R6XX/R7XX
  drm/radeon/kms: move blit initialization after we disabled VGA

12 years agoMerge git://
Linus Torvalds [Fri, 5 Feb 2010 15:23:03 +0000 (07:23 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://
  Btrfs: apply updated fallocate i_size fix
  Btrfs: do not try and lookup the file extent when finishing ordered io
  Btrfs: Fix oopsen when dropping empty tree.
  Btrfs: remove BUG_ON() due to mounting bad filesystem
  Btrfs: make error return negative in btrfs_sync_file()
  Btrfs: fix race between allocate and release extent buffer.

12 years agoASoC: pandora: Add APLL supply to fix audio output
Grazvydas Ignotas [Thu, 4 Feb 2010 22:55:33 +0000 (00:55 +0200)]
ASoC: pandora: Add APLL supply to fix audio output

Pandora's external DAC is using 256*Fs output from the TWL4030
codec, and TWL4030 needs to have APLL enabled for it's 256*Fs
output to function.

Signed-off-by: Grazvydas Ignotas <>
Acked-by: Peter Ujfalusi <>
Acked-by: Liam Girdwood <>
Signed-off-by: Mark Brown <>
12 years agoALSA: ice1724 - aureon - fix wm8770 volume offset
Jaroslav Kysela [Fri, 5 Feb 2010 09:19:41 +0000 (10:19 +0100)]
ALSA: ice1724 - aureon - fix wm8770 volume offset

The volume register is from 0..0x7f and 0..0x1a range is mute.
Also, fix mute combining in wm_vol_put(). The wrong behaviour was
noticed by Peter Christensen.

Signed-off-by: Jaroslav Kysela <>
12 years agoALSA: cosmetic: make hda intel interrupt name consistent with others
Maxim Levitsky [Thu, 4 Feb 2010 20:26:37 +0000 (22:26 +0200)]
ALSA: cosmetic: make hda intel interrupt name consistent with others

This renames the interrupt name in /proc/interrupt.
HDA Intel -> hda_intel

This also eliminates space from the name, probably helping some
Don't think anybody depends on this name in userspace

Signed-off-by: Takashi Iwai <>
12 years agoALSA: hda - Delay switching to polling mode if an interrupt was missing
Maxim Levitsky [Thu, 4 Feb 2010 20:21:47 +0000 (22:21 +0200)]
ALSA: hda - Delay switching to polling mode if an interrupt was missing

My sound codec seems sometimes (very rarely) to omit interrupts (ALC268)
However, interrupt mode still works.
Thus if we get timeout, poll the codec once.

If we get 3 such polls in a row, then switch to polling mode.

This patch is maybe an bandaid, but this might be a workaround for hardware bug.

Signed-off-by: Maxim Levitsky <>
Signed-off-by: Takashi Iwai <>
12 years agodrm/radeon/kms: fix r300 vram width calculations
Dave Airlie [Fri, 5 Feb 2010 03:57:03 +0000 (13:57 +1000)]
drm/radeon/kms: fix r300 vram width calculations

This was incorrect according to the docs and the UMS driver does
it like this.

Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: rs400/480 MC setup is different than r300.
Dave Airlie [Fri, 5 Feb 2010 03:41:54 +0000 (13:41 +1000)]
drm/radeon/kms: rs400/480 MC setup is different than r300.

Boot testing on my rs480 laptop found the MC idle never happened
on startup, a quick check with AMD found the idle bit is in a different
place on the rs4xx than r300.

Implement a new rs400 mc idle function to fix this.

Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: make initial state of load detect property correct.
Dave Airlie [Wed, 27 Jan 2010 06:07:15 +0000 (16:07 +1000)]
drm/radeon/kms: make initial state of load detect property correct.

this was incorrect on my rs480.

Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: disable HDMI audio for now on rv710/rv730
Dave Airlie [Fri, 5 Feb 2010 01:57:42 +0000 (11:57 +1000)]
drm/radeon/kms: disable HDMI audio for now on rv710/rv730

Support isn't correct yet and we are getting green tinges on the

Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: don't call suspend path before cleaning up GPU
Jerome Glisse [Tue, 2 Feb 2010 10:51:45 +0000 (11:51 +0100)]
drm/radeon/kms: don't call suspend path before cleaning up GPU

In suspend path we unmap the GART table while in cleaning up
path we will unbind buffer and thus try to write to unmapped
GART leading to oops. In order to avoid this we don't call the
suspend path in cleanup path. Cleanup path is clever enough
to desactive GPU like the suspend path is doing, thus this was

Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE)

Signed-off-by: Jerome Glisse <>
Signed-off-by: Dave Airlie <>
12 years agodrivers/gpu/drm/radeon/radeon_combios.c: fix warning
Andrew Morton [Tue, 2 Feb 2010 22:40:29 +0000 (14:40 -0800)]
drivers/gpu/drm/radeon/radeon_combios.c: fix warning

drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info':
drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type

Cc: Dave Airlie <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Dave Airlie <>
12 years agoati_pcigart: fix printk format warning
Randy Dunlap [Tue, 2 Feb 2010 22:40:33 +0000 (14:40 -0800)]
ati_pcigart: fix printk format warning

Fix ati_pcigart printk format warning:

drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t'

Signed-off-by: Randy Dunlap <>
Cc: Zhenyu Wang <>
Cc: Dave Airlie <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Dave Airlie <>
12 years agodrm/r100/kms: Emit cache flush to the end of command buffer. (v2)
Pauli Nieminen [Thu, 4 Feb 2010 17:20:53 +0000 (19:20 +0200)]
drm/r100/kms: Emit cache flush to the end of command buffer. (v2)

Cache flush is required in case CPU is accessing rendered data.

This fixes glean/readPixSanity test case and random rendering
errors in sauerbraten and warzone2100.

v2 Fix comment ordering in r100_fence_ring_emit and remove extra
   defines added in first version.

Signed-off-by: Pauli Nieminen <>
Reviewed-by: Jerome Glisse <>
Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: fix regression rendering issue on R6XX/R7XX
Jerome Glisse [Thu, 4 Feb 2010 19:36:39 +0000 (20:36 +0100)]
drm/radeon/kms: fix regression rendering issue on R6XX/R7XX

It seems that some R6XX/R7XX silently ignore HDP flush when
programmed through ring, this patch addback an ioctl callback
to allow R6XX/R7XX hw to perform such flush through MMIO in
order to fix a regression. For more details see:

Signed-off-by: Jerome Glisse <>
Signed-off-by: Dave Airlie <>
12 years agodrm/radeon/kms: move blit initialization after we disabled VGA
Jerome Glisse [Thu, 4 Feb 2010 16:27:27 +0000 (17:27 +0100)]
drm/radeon/kms: move blit initialization after we disabled VGA

VGA might be overwritting VRAM and corrupt our blit shader leading
to corruption, it likely won't happen if you load fbcon right after
radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down
this issue.

Signed-off-by: Jerome Glisse <>
Signed-off-by: Dave Airlie <>
12 years agoMerge
Linus Torvalds [Fri, 5 Feb 2010 00:09:01 +0000 (16:09 -0800)]

  ARM: Fix wrong register in proc-arm6_7.S data abort handler
  ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions
  ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2
  ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board
  mx35: add a missing comma in a pad definition
  mx25: make the FEC AHB clk secondary of the IPG
  mx25: fix time accounting
  mx25: properly initialize clocks
  mx25: remove unused mx25_clocks_init() argument
  i.MX25: implement secondary clocks for uarts and fec
  i.MX25: Allow secondary clocks in DEFINE_CLOCK
  ARM: MX3: Fixed typo in declared enum type name.
  MXC: Add AUDMUXv2 register decode to debugfs
  mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
  mx31ads: Provide a name for EXPIO interrupt chip
  mx31ads: Allow enable/disable of switchable supplies

12 years agoMerge branch 'omap-fixes-for-linus' of git://
Linus Torvalds [Fri, 5 Feb 2010 00:08:42 +0000 (16:08 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://
  omap: Disable serial port autoidle by default
  omap: Fix access to already released memory in clk_debugfs_register_one()
  omap: Fix arch/arm/mach-omap2/mux.c: Off by one error
  omap: Fix 3630 mux errors
  OMAP2/3: GPMC: ensure valid clock pointer
  OMAP2/3: IRQ: ensure valid base address
  omap: Remove old unused defines for OMAP_32KSYNCT_BASE
  omap: define _toggle_gpio_edge_triggering only for OMAP1

12 years agoMerge branch 'bugfixes' of git://
Linus Torvalds [Fri, 5 Feb 2010 00:08:15 +0000 (16:08 -0800)]
Merge branch 'bugfixes' of git://

* 'bugfixes' of git://
  NFS: Don't clobber the attribute type in nfs_update_inode()
  NFS: Fix a umount race
  NFS: Fix an Oops when truncating a file
  NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly
  NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily
  NFSv4: Don't allow posix locking against servers that don't support it
  NFSv4: Ensure that the NFSv4 locking can recover from stateid errors
  NFS: Avoid warnings when CONFIG_NFS_V4=n
  NFS: Make nfs_commitdata_release static
  NFS: Try to commit unstable writes in nfs_release_page()
  NFS: Fix a reference leak in nfs_wb_cancel_page()

12 years agoMerge branch 'core-fixes-for-linus' of git://
Linus Torvalds [Fri, 5 Feb 2010 00:07:41 +0000 (16:07 -0800)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://
  futex: Handle futex value corruption gracefully
  futex: Handle user space corruption gracefully
  futex_lock_pi() key refcnt fix
  softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume

12 years agoMerge git://
Linus Torvalds [Fri, 5 Feb 2010 00:06:48 +0000 (16:06 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://
  GFS2: Extend umount wait coverage to full glock lifetime
  GFS2: Wait for unlock completion on umount

12 years agoidr: revert misallocation bug fix
Tejun Heo [Thu, 4 Feb 2010 08:57:37 +0000 (17:57 +0900)]
idr: revert misallocation bug fix

Commit 859ddf09743a8cc680af33f7259ccd0fd36bfe9d tried to fix
misallocation bug but broke full bit marking by not clearing
pa[idp->layers] and also is causing X failures due to lookup failure
in drm code.  The cause of the latter hasn't been found yet.  Revert
the fix for now.

Signed-off-by: Tejun Heo <>
Signed-off-by: Linus Torvalds <>
12 years agoALSA: ctxfi - fix PTP address initialization
Jaroslav Kysela [Tue, 2 Feb 2010 18:58:25 +0000 (19:58 +0100)]
ALSA: ctxfi - fix PTP address initialization

After hours of debugging, I finally found the reason why some source
and runtime combination does not work. The PTP (page table pages)
address must be aligned. I am not sure how much, but alignment to
PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines
to ensure proper virtual -> physical address translation.

Cc: <>
Signed-off-by: Jaroslav Kysela <>
12 years agodrm/i915: Fix leak of relocs along do_execbuffer error path
Chris Wilson [Sun, 31 Jan 2010 10:40:48 +0000 (10:40 +0000)]
drm/i915: Fix leak of relocs along do_execbuffer error path

Following a gpu hang, we would leak the relocation buffer. So simply
earrange the error path to always free the relocation buffer.

Signed-off-by: Chris Wilson <>
Signed-off-by: Eric Anholt <>
12 years agodrm/i915: slow acpi_lid_open() causes flickering - V2
Thomas Meyer [Tue, 2 Feb 2010 19:09:04 +0000 (20:09 +0100)]
drm/i915: slow acpi_lid_open() causes flickering - V2

acpi_lid_open() could take up to 10ms on my computer.  Some component is
calling the drm GETCONNECTOR ioctl many times in a row.  This results in
flickering (for example, when starting a video).  Fix it by assuming an
always connected lid status.

Signed-off-by: Thomas Meyer <>
Signed-off-by: Eric Anholt <>
12 years agodrm/i915: Disable SR when more than one pipe is enabled
David John [Wed, 27 Jan 2010 09:49:08 +0000 (15:19 +0530)]
drm/i915: Disable SR when more than one pipe is enabled

Self Refresh should be disabled on dual plane configs.  Otherwise, as
the SR watermark is not calculated for such configs, switching to non
VGA mode causes FIFO underrun and display flicker.

This fixes Korg Bug #14897.

Signed-off-by: David John <>
Signed-off-by: Jesse Barnes <>
Signed-off-by: Eric Anholt <>
12 years agoBtrfs: apply updated fallocate i_size fix
Aneesh Kumar K.V [Thu, 4 Feb 2010 16:33:03 +0000 (11:33 -0500)]
Btrfs: apply updated fallocate i_size fix

This version of the i_size fix for fallocate makes sure we only update
the i_size when the current fallocate is really operating outside of

Signed-off-by: Chris Mason <>
12 years agoBtrfs: do not try and lookup the file extent when finishing ordered io
Josef Bacik [Tue, 2 Feb 2010 20:50:10 +0000 (20:50 +0000)]
Btrfs: do not try and lookup the file extent when finishing ordered io

When running the following fio job


you would see long stalls where no work was being done.  That is because we were
doing all this extra work to read in the file extent outside of the transaction,
however in the random io case this ends up hurting us because the file extents
are not there to begin with.  So axe this logic, since we end up reading in the
file extent when we go to update it anyway.  This took the fio job from 11 mb/s
with several ~10 second stalls to 24 mb/s to a couple of 1-2 second stalls.

Signed-off-by: Josef Bacik <>
Signed-off-by: Chris Mason <>
12 years agoBtrfs: Fix oopsen when dropping empty tree.
Yan, Zheng [Mon, 1 Feb 2010 02:41:17 +0000 (02:41 +0000)]
Btrfs: Fix oopsen when dropping empty tree.

When dropping a empty tree, walk_down_tree() skips checking
extent information for the tree root. This will triggers a
BUG_ON in walk_up_proc().

Signed-off-by: Yan Zheng <>
Signed-off-by: Chris Mason <>
12 years agoBtrfs: remove BUG_ON() due to mounting bad filesystem
Miao Xie [Tue, 2 Feb 2010 08:46:44 +0000 (08:46 +0000)]
Btrfs: remove BUG_ON() due to mounting bad filesystem

Mounting a bad filesystem caused a BUG_ON(). The following is steps to
reproduce it.
 # mkfs.btrfs /dev/sda2
 # mount /dev/sda2 /mnt
 # mkfs.btrfs /dev/sda1 /dev/sda2
 (the program says that /dev/sda2 was mounted, and then exits. )
 # umount /mnt
 # mount /dev/sda1 /mnt

At the third step, mkfs.btrfs exited in the way of make filesystem. So the
initialization of the filesystem didn't finish. So the filesystem was bad, and
it caused BUG_ON() when mounting it. But BUG_ON() should be called by the wrong
code, not user's operation, so I think it is a bug of btrfs.

This patch fixes it.

Signed-off-by: Miao Xie <>
Signed-off-by: Chris Mason <>
12 years agoBtrfs: make error return negative in btrfs_sync_file()
Roel Kluin [Fri, 29 Jan 2010 10:42:11 +0000 (10:42 +0000)]
Btrfs: make error return negative in btrfs_sync_file()

It appears the error return should be negative

Signed-off-by: Roel Kluin <>
Signed-off-by: Chris Mason <>
12 years agoBtrfs: fix race between allocate and release extent buffer.
Yan, Zheng [Thu, 4 Feb 2010 08:46:56 +0000 (08:46 +0000)]
Btrfs: fix race between allocate and release extent buffer.

Increase extent buffer's reference count while holding the lock.
Otherwise it can race with try_release_extent_buffer.

Signed-off-by: Yan Zheng <>
Signed-off-by: Chris Mason <>
12 years ago[libata] Call flush_dcache_page after PIO data transfers in libata-sff.c
Catalin Marinas [Thu, 4 Feb 2010 06:04:50 +0000 (01:04 -0500)]
[libata] Call flush_dcache_page after PIO data transfers in libata-sff.c

flush_dcache_page() must be called after (!ATA_TFLAG_WRITE) the
data copying to avoid D-cache aliasing with user space or I-D cache
coherency issues (when reading data from an ATA device using PIO,
the kernel dirties the D-cache but there is no flush_dcache_page()
required on Harvard architectures).

Signed-off-by: Catalin Marinas <>
Signed-off-by: Jeff Garzik <>
12 years agoahci: add Acer G725 to broken suspend list
Tejun Heo [Thu, 28 Jan 2010 07:04:15 +0000 (16:04 +0900)]
ahci: add Acer G725 to broken suspend list

Acer G725 shares the same suspend problem with the HP laptops which
lose ATA devices on resume.  New firmware which fixes the problem is
already available.  Add G725 with old firmwares to the broken suspend

This problem has been reported in bko#15104.

Signed-off-by: Tejun Heo <>
Reported-by: Jani-Matti Hätinen <>
Signed-off-by: Jeff Garzik <>
12 years agolibata: fix ata_id_logical_per_physical_sectors
Christoph Hellwig [Thu, 28 Jan 2010 12:30:11 +0000 (13:30 +0100)]
libata: fix ata_id_logical_per_physical_sectors

The value we get from the low byte of the ATA_ID_SECTOR_SIZE word is not not
a plain multiple, but the log of it, so fix the helper to give the correct
answer.  Without this we'll get an incorrect minimal I/O size in the block
limits VPD page for 4k sector drives.

Also change the return value of ata_id_logical_per_physical_sectors to u16
for the unlikely case of very large logical sectors.

Signed-off-by: Christoph Hellwig <>
Signed-off-by: Jeff Garzik <>
12 years agolibata-scsi passthru: fix bug which truncated LBA48 return values
Douglas Gilbert [Mon, 1 Feb 2010 18:11:38 +0000 (13:11 -0500)]
libata-scsi passthru: fix bug which truncated LBA48 return values

Fix assignment which overwrote SAT ATA PASS-THROUGH command EXTEND
bit setting (ATA_TFLAG_LBA48)

Signed-off-by: Douglas Gilbert <>
Signed-off-by: Jeff Garzik <>
12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Thu, 4 Feb 2010 00:08:50 +0000 (16:08 -0800)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  microblaze: fix interrupt state restore
  microblaze: Defconfig update

12 years agoMerge branch 'v4l_for_linus' of git://
Linus Torvalds [Thu, 4 Feb 2010 00:08:36 +0000 (16:08 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://
  saa7146: stop DMA before de-allocating DMA scatter/gather page buffers
  V4L/DVB: saa7134: remove stray unlock_kernel

12 years agoomap: Disable serial port autoidle by default
Tony Lindgren [Mon, 1 Feb 2010 20:34:31 +0000 (12:34 -0800)]
omap: Disable serial port autoidle by default

Currently the omap serial clocks are autoidled after 5 seconds.
However, this causes lost characters on the serial ports. As this
is considered non-standard behaviour for Linux, disable the timeout.

Note that this will also cause blocking of any deeper omap sleep

To enable the autoidling of the serial ports, do something like
this for each serial port:

# echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout
# echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout

Signed-off-by: Kevin Hilman <>
Signed-off-by: Tony Lindgren <>
12 years agoomap: Fix access to already released memory in clk_debugfs_register_one()
Marek Skuczynski [Sun, 31 Jan 2010 10:00:54 +0000 (10:00 +0000)]
omap: Fix access to already released memory in clk_debugfs_register_one()

I have found an access to already released memory in
clk_debugfs_register_one() function.

Signed-off-by: Marek Skuczynski <>
Acked-by: Paul Walmsley <>
Signed-off-by: Tony Lindgren <>
12 years agoomap: Fix arch/arm/mach-omap2/mux.c: Off by one error
Tony Lindgren [Mon, 1 Feb 2010 21:03:42 +0000 (13:03 -0800)]
omap: Fix arch/arm/mach-omap2/mux.c: Off by one error

David Binderman ran the sourceforge tool cppcheck over the source code of the
new Linux kernel 2.6.33-rc6:

[./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds

13 characters + 1 digit + 1 zero byte is more than 14 characters.

Also add a comment on mode0 name length in case new omaps
start using longer names.

Reported-by: David Binderman <>
Signed-off-by: Tony Lindgren <>
12 years agoomap: Fix 3630 mux errors
Tony Lindgren [Mon, 1 Feb 2010 19:22:54 +0000 (11:22 -0800)]
omap: Fix 3630 mux errors

3630 has more mux signals than 34xx. The additional pins
exist in omap36xx_cbp_subset, but are not initialized
as the superset is missing these offsets. This causes
the following errors during the boot:

mux: Unknown entry offset 0x236
mux: Unknown entry offset 0x22e
mux: Unknown entry offset 0x1ec
mux: Unknown entry offset 0x1ee
mux: Unknown entry offset 0x1f4
mux: Unknown entry offset 0x1f6
mux: Unknown entry offset 0x1f8
mux: Unknown entry offset 0x1fa
mux: Unknown entry offset 0x1fc
mux: Unknown entry offset 0x22a
mux: Unknown entry offset 0x226
mux: Unknown entry offset 0x230
mux: Unknown entry offset 0x22c
mux: Unknown entry offset 0x228

Fix this by adding the missing offsets to omap3 superset.
Note that additionally the uninitialized pins need to be
skipped on 34xx.

Based on an earlier patch by Allen Pais <>.

Reported-by: Allen Pais <>
Signed-off-by: Allen Pais <>
Signed-off-by: Tony Lindgren <>
12 years agoOMAP2/3: GPMC: ensure valid clock pointer
Kevin Hilman [Fri, 29 Jan 2010 22:20:06 +0000 (14:20 -0800)]
OMAP2/3: GPMC: ensure valid clock pointer

Ensure valid clock pointer during GPMC init.  Fixes compiler
warning about potential use of uninitialized variable.

Signed-off-by: Kevin Hilman <>
Signed-off-by: Tony Lindgren <>
12 years agoOMAP2/3: IRQ: ensure valid base address
Kevin Hilman [Fri, 29 Jan 2010 22:20:06 +0000 (14:20 -0800)]
OMAP2/3: IRQ: ensure valid base address

Ensure valid base address during IRQ init.  Fixes compiler warning
about potential use of uninitialized variable.

Signed-off-by: Kevin Hilman <>
Signed-off-by: Tony Lindgren <>
Sriram [Fri, 29 Jan 2010 22:20:05 +0000 (14:20 -0800)]

OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>

To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:

Signed-off-by: Sriramakrishnan <>
Signed-off-by: Tony Lindgren <>
12 years agoomap: Remove old unused defines for OMAP_32KSYNCT_BASE
Tony Lindgren [Fri, 29 Jan 2010 22:20:05 +0000 (14:20 -0800)]
omap: Remove old unused defines for OMAP_32KSYNCT_BASE

Remove old unused defines for OMAP_32KSYNCT_BASE

Signed-off-by: Tony Lindgren <>
12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Wed, 3 Feb 2010 16:47:15 +0000 (08:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://
  nilfs2: fix potential leak of dirty data on umount

12 years agoARM: Fix wrong register in proc-arm6_7.S data abort handler
Russell King [Wed, 3 Feb 2010 15:48:03 +0000 (15:48 +0000)]
ARM: Fix wrong register in proc-arm6_7.S data abort handler

Signed-off-by: Russell King <>
12 years agofutex: Handle futex value corruption gracefully
Thomas Gleixner [Wed, 3 Feb 2010 08:33:05 +0000 (09:33 +0100)]
futex: Handle futex value corruption gracefully

The WARN_ON in lookup_pi_state which complains about a mismatch
between pi_state->owner->pid and the pid which we retrieved from the
user space futex is completely bogus.

The code just emits the warning and then continues despite the fact
that it detected an inconsistent state of the futex. A conveniant way
for user space to spam the syslog.

Replace the WARN_ON by a consistency check. If the values do not match
return -EINVAL and let user space deal with the mess it created.

This also fixes the missing task_pid_vnr() when we compare the
pi_state->owner pid with the futex value.

Reported-by: Jermome Marchand <>
Signed-off-by: Thomas Gleixner <>
Acked-by: Darren Hart <>
Acked-by: Peter Zijlstra <>
Cc: <>
12 years agofutex: Handle user space corruption gracefully
Thomas Gleixner [Tue, 2 Feb 2010 10:40:27 +0000 (11:40 +0100)]
futex: Handle user space corruption gracefully

If the owner of a PI futex dies we fix up the pi_state and set
pi_state->owner to NULL. When a malicious or just sloppy programmed
user space application sets the futex value to 0 e.g. by calling
pthread_mutex_init(), then the futex can be acquired again. A new
waiter manages to enqueue itself on the pi_state w/o damage, but on
unlock the kernel dereferences pi_state->owner and oopses.

Prevent this by checking pi_state->owner in the unlock path. If
pi_state->owner is not current we know that user space manipulated the
futex value. Ignore the mess and return -EINVAL.

This catches the above case and also the case where a task hijacks the
futex by setting the tid value and then tries to unlock it.

Reported-by: Jermome Marchand <>
Signed-off-by: Thomas Gleixner <>
Acked-by: Darren Hart <>
Acked-by: Peter Zijlstra <>
Cc: <>
12 years agofutex_lock_pi() key refcnt fix
Mikael Pettersson [Sat, 23 Jan 2010 21:36:29 +0000 (22:36 +0100)]
futex_lock_pi() key refcnt fix

This fixes a futex key reference count bug in futex_lock_pi(),
where a key's reference count is incremented twice but decremented
only once, causing the backing object to not be released.

If the futex is created in a temporary file in an ext3 file system,
this bug causes the file's inode to become an "undead" orphan,
which causes an oops from a BUG_ON() in ext3_put_super() when the
file system is unmounted. glibc's test suite is known to trigger this,
see <>.

The bug is a regression from 2.6.28-git3, namely Peter Zijlstra's
38d47c1b7075bd7ec3881141bb3629da58f88dab "[PATCH] futex: rely on
get_user_pages() for shared futexes". That commit made get_futex_key()
also increment the reference count of the futex key, and updated its
callers to decrement the key's reference count before returning.
Unfortunately the normal exit path in futex_lock_pi() wasn't corrected:
the reference count is incremented by get_futex_key() and queue_lock(),
but the normal exit path only decrements once, via unqueue_me_pi().
The fix is to put_futex_key() after unqueue_me_pi(), since 2.6.31
this is easily done by 'goto out_put_key' rather than 'goto out'.

Signed-off-by: Mikael Pettersson <>
Acked-by: Peter Zijlstra <>
Acked-by: Darren Hart <>
Signed-off-by: Thomas Gleixner <>
Cc: <>
12 years agoNFS: Don't clobber the attribute type in nfs_update_inode()
Trond Myklebust [Wed, 3 Feb 2010 13:27:35 +0000 (08:27 -0500)]
NFS: Don't clobber the attribute type in nfs_update_inode()

If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should
not set the S_IFMT part of inode->i_mode.

Reported-by: Al Viro <>
Signed-off-by: Trond Myklebust <>
12 years agoNFS: Fix a umount race
Trond Myklebust [Wed, 3 Feb 2010 13:27:35 +0000 (08:27 -0500)]
NFS: Fix a umount race

Ensure that we unregister the bdi before kill_anon_super() calls
ida_remove() on our device name.

Signed-off-by: Trond Myklebust <>
12 years agoNFS: Fix an Oops when truncating a file
Trond Myklebust [Wed, 3 Feb 2010 13:27:22 +0000 (08:27 -0500)]
NFS: Fix an Oops when truncating a file

The VM/VFS does not allow mapping->a_ops->invalidatepage() to fail.
Unfortunately, nfs_wb_page_cancel() may fail if a fatal signal occurs.
Since the NFS code assumes that the page stays mapped for as long as the
writeback is active, we can end up Oopsing (among other things).

The only safe fix here is to convert nfs_wait_on_request(), so as to make
it uninterruptible (as is already the case with wait_on_page_writeback()).

Signed-off-by: Trond Myklebust <>
12 years agomicroblaze: fix interrupt state restore
Steven J. Magnani [Mon, 1 Feb 2010 12:34:45 +0000 (06:34 -0600)]
microblaze: fix interrupt state restore

Interrupts must be disabled while an interrupt state restore
(prep for interrupt return) is in progress.
Code to do this was lost in the port to the mainline kernel.

Signed-off-by: Steven J. Magnani <>
Signed-off-by: Michal Simek <>
12 years agoGFS2: Extend umount wait coverage to full glock lifetime
Steven Whitehouse [Fri, 29 Jan 2010 15:21:27 +0000 (15:21 +0000)]
GFS2: Extend umount wait coverage to full glock lifetime

Although all glocks are, by the time of the umount glock wait,
scheduled for demotion, some of them haven't made it far
enough through the process for the original set of waiting
code to wait for them.

This extends the ref count to the whole glock lifetime in order
to ensure that the waiting does catch all glocks. It does make
it a bit more invasive, but it seems the only sensible solution
at the moment.

Signed-off-by: Steven Whitehouse <>
12 years agoGFS2: Wait for unlock completion on umount
Steven Whitehouse [Mon, 25 Jan 2010 11:20:19 +0000 (11:20 +0000)]
GFS2: Wait for unlock completion on umount

This patch adds a wait on umount between the point at which we
dispose of all glocks and the point at which we unmount the
lock protocol. This ensures that we've received all the replies
to our unlock requests before we stop the locking.

Signed-off-by: Steven Whitehouse <>
Reported-by: Fabio M. Di Nitto <>
12 years agomicroblaze: Defconfig update
Michal Simek [Wed, 3 Feb 2010 09:18:20 +0000 (10:18 +0100)]
microblaze: Defconfig update

There were several changes in Microblaze defconfig that's why
is good to update defconfigs.

Signed-off-by: Michal Simek <>
12 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Wed, 3 Feb 2010 02:12:22 +0000 (18:12 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://
  kernel/cred.c: use kmem_cache_free

12 years agoMerge git://
Linus Torvalds [Wed, 3 Feb 2010 02:11:52 +0000 (18:11 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git:// (23 commits)
  connector: Delete buggy notification code.
  be2net: use eq-id to calculate cev-isr reg offset
  Bluetooth: Use the control channel for raw HID reports
  Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011
  Bluetooth: Redo checks in IRQ handler for shared IRQ support
  Bluetooth: Fix memory leak in L2CAP
  Bluetooth: Remove double free of SKB pointer in L2CAP
  cdc_ether: Partially revert "usbnet: Set link down initially ..."
  be2net: Fix memset() arg ordering.
  bonding: bond_open error return value
  ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early
  ixgbe: set the correct DCB bit for pg tx settings
  igbvf: fix issue w/ mapped_as_page being left set after unmap
  drivers/net: ks8851_mll ethernet network driver
  be2net: Bug fix to support newer generation of BE ASIC
  starfire: clean up properly if firmware loading fails
  mac80211: fix NULL pointer dereference when ftrace is enabled
  netfilter: ctnetlink: fix expectation mask dump
  ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure
  ath9k: fix eeprom INI values override for 2GHz-only cards

12 years agopktcdvd: removing device does not remove its sysfs dir
Thadeu Lima de Souza Cascardo [Tue, 2 Feb 2010 21:44:17 +0000 (13:44 -0800)]
pktcdvd: removing device does not remove its sysfs dir

This is the counterpart to cba767175becadc5c4016cceb7bfdd2c7fe722f4
("pktcdvd: remove broken dev_t export of class devices").  Device is not
registered using dev_t, so it should not be destroyed using device_destroy
which looks up the device by dev_t.  This will fail and adding the device
again will fail with the "duplicate name" error.  This is fixed using
device_unregister instead of device_destroy.

Signed-off-by: Thadeu Lima de Souza Cascardo <>
Cc: Kay Sievers <>
Cc: Peter Osterlund <>
Cc: Al Viro <>
Cc: Jens Axboe <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agomemory hotplug: fix a bug on /dev/mem for 64-bit kernels
Shaohui Zheng [Tue, 2 Feb 2010 21:44:16 +0000 (13:44 -0800)]
memory hotplug: fix a bug on /dev/mem for 64-bit kernels

Newly added memory can not be accessed via /dev/mem, because we do not
update the variables high_memory, max_pfn and max_low_pfn.

Add a function update_end_of_memory_vars() to update these variables for
64-bit kernels.

[ simplify comment]
Signed-off-by: Shaohui Zheng <>
Cc: Andi Kleen <>
Cc: Li Haicheng <>
Reviewed-by: Wu Fengguang <>
Reviewed-by: KAMEZAWA Hiroyuki <>
Cc: Ingo Molnar <>
Cc: Thomas Gleixner <>
Cc: "H. Peter Anvin" <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agofault injection: correct function names in documentation
Anton Blanchard [Tue, 2 Feb 2010 21:44:15 +0000 (13:44 -0800)]
fault injection: correct function names in documentation

init_fault_attr_entries() should be init_fault_attr_dentries().

cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries().

Signed-off-by: Anton Blanchard <>
Acked-by: Akinobu Mita <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agohugetlb: fix section mismatches
Jeff Mahoney [Tue, 2 Feb 2010 21:44:14 +0000 (13:44 -0800)]
hugetlb: fix section mismatches

hugetlb_sysfs_add_hstate is called by hugetlb_register_node directly
during init and also indirectly via sysfs after init.

This patch removes the __init tag from hugetlb_sysfs_add_hstate.

Signed-off-by: Jeff Mahoney <>
Cc: Lee Schermerhorn <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agouartlite: fix crash when using as console
Richard Röjfors [Tue, 2 Feb 2010 21:44:12 +0000 (13:44 -0800)]
uartlite: fix crash when using as console

Move the ulite_console_setup to the .devinit section since it might be
called on probe, which is in devinit.  Fixes the crash below where the
uartlite hw is probed after the .init section is freed from the kernel.

uartlite: ttyUL0 at MMIO 0xc8000100 (irq = 30) is a uartlite
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c176720e>] ulite_console_setup+0x6f/0xa8
*pdpt = 0000000036fb0001 *pde = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.1/host0/uevent
Modules linked in: puffin(+) serio_raw

Pid: 151, comm: modprobe Not tainted ( #1) POULSBO
EIP: 0060:[<c176720e>] EFLAGS: 00010246 CPU: 0
EIP is at ulite_console_setup+0x6f/0xa8
EAX: c16ec824 EBX: c16ec824 ECX: c176719f EDX: 00000000
ESI: 00000000 EDI: c17b42c4 EBP: f6fd1cf0 ESP: f6fd1cd8
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 151, ti=f6fd0000 task=f6fa1020 task.ti=f6fd0000)
 c1031f51 00000000 00000000 00000246 c182237c f7742000 f6fd1d5c c11fd316
<0> c16ec85c f77420d4 0000001e 00000000 00000000 c1633e78 4f494d4d 63783020
<0> 30303038 00303031 f6fd1d3c c10e0786 f6fd1d48 00000000 f6fd1d48 00000000
Call Trace:
 [<c1031f51>] ? register_console+0xf6/0x1fc
 [<c11fd316>] ? uart_add_one_port+0x237/0x2bb
 [<c10e0786>] ? sysfs_add_one+0x13/0xd3
 [<c10e142f>] ? sysfs_do_create_link+0xba/0xfc
 [<c146f200>] ? ulite_probe+0x198/0x1eb
 [<c12064ee>] ? platform_drv_probe+0xc/0xe
 [<c120597b>] ? driver_probe_device+0x79/0x105
 [<c1205a8e>] ? __device_attach+0x28/0x30
 [<c120511f>] ? bus_for_each_drv+0x3d/0x67
 [<c1205af9>] ? device_attach+0x44/0x58
 [<c1205a66>] ? __device_attach+0x0/0x30
 [<c1204fb8>] ? bus_probe_device+0x1f/0x34
 [<c1203e68>] ? device_add+0x385/0x4c0
 [<c148491f>] ? _write_unlock+0x8/0x1f
 [<c1206aac>] ? platform_device_add+0xd9/0x11c
 [<c120c685>] ? mfd_add_devices+0x165/0x1bc
 [<f831b378>] ? puffin_probe+0x2d0/0x390 [puffin]
 [<c11a08ef>] ? pci_match_device+0xa0/0xa7
 [<c11a07bc>] ? local_pci_probe+0xe/0x10
 [<c11a11db>] ? pci_device_probe+0x43/0x66
 [<c120597b>] ? driver_probe_device+0x79/0x105
 [<c1205a4a>] ? __driver_attach+0x43/0x5f
 [<c120535d>] ? bus_for_each_dev+0x3d/0x67
 [<c1205852>] ? driver_attach+0x14/0x16
 [<c1205a07>] ? __driver_attach+0x0/0x5f
 [<c1204dea>] ? bus_add_driver+0xf9/0x220
 [<c1205c8f>] ? driver_register+0x8b/0xeb
 [<c11a1518>] ? __pci_register_driver+0x43/0x9f
 [<c10477ef>] ? __blocking_notifier_call_chain+0x40/0x4c
 [<f831f000>] ? puffin_init+0x0/0x48 [puffin]
 [<f831f017>] ? puffin_init+0x17/0x48 [puffin]
 [<c1001139>] ? do_one_initcall+0x4c/0x131
 [<c105607b>] ? sys_init_module+0xa7/0x1b7
 [<c1002a61>] ? syscall_call+0x7/0xb
 Code: 6e 74 00 00 00 92 33 00 00 18 00 0e 01 73 79 6e 63 65 2d 72 65 67 69 73 74 72 79 0c 00 49 32
00 00 14 00 09 01 61 6c 73 61 2d 69 <6e> 66 6f 00 00 00 42 37 00 00 10 00 07 01 6b 69 6c 6c 61 6c 6c
EIP: [<c176720e>] ulite_console_setup+0x6f/0xa8 SS:ESP 0068:f6fd1cd8
CR2: 0000000000000000

Signed-off-by: Richard Röjfors <>
Acked-by: Peter Korsgaard <>
Cc: Alan Cox <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agoimxfb: correct location of callbacks in suspend and resume
Uwe Kleine-König [Tue, 2 Feb 2010 21:44:10 +0000 (13:44 -0800)]
imxfb: correct location of callbacks in suspend and resume

The probe function passes a pointer to a struct fb_info to
platform_set_drvdata(), so don't interpret the return value of
platform_get_drvdata() as a pointer to struct imxfb_info.

The original imxfb_info *fbi backlight_power was NULL but in imxfb_suspend
it was 4 resulting in an oops as imxfb_suspend calls
imxfb_disable_controller(fbi) which in turn has

if (fbi->backlight_power)

Signed-off-by: Uwe Kleine-König <>
Acked-by: Sascha Hauer <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agocgroups: fix to return errno in a failure path
Li Zefan [Tue, 2 Feb 2010 21:44:10 +0000 (13:44 -0800)]
cgroups: fix to return errno in a failure path

In cgroup_create(), if alloc_css_id() returns failure, the errno is not
propagated to userspace, so mkdir will fail silently.

To trigger this bug, we mount blkio (or memory subsystem), and create more
then 65534 cgroups.  (The number of cgroups is limited to 65535 if a
subsystem has use_id == 1)

 # mount -t cgroup -o blkio xxx /mnt
 # for ((i = 0; i < 65534; i++)); do mkdir /mnt/$i; done
 # mkdir /mnt/65534
 (should return ENOSPC)

Signed-off-by: Li Zefan <>
Acked-by: Serge Hallyn <>
Acked-by: Paul Menage <>
Acked-by: KAMEZAWA Hiroyuki <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years fix $func_offset error with x86_64
Hui Zhu [Tue, 2 Feb 2010 21:44:09 +0000 (13:44 -0800)] fix $func_offset error with x86_64

When I use parse a x8664 oops, I got:

objdump: --start-address: bad number: NaN
No matching code found
This is because:
main::(./ open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
  DB<3> p $decodestart

This NaN is from:
main::(./ my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
  DB<2> p $func_offset

There is already a "0x" in $func_offset, another 0x makes it a NaN.

The $func_offset is from line:

if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;

I make a patch to change "(0x[0-9a-f]+)\/0x[a-f0-9]/)" to "0x([0-9a-f]+)\/0x[a-f0-9]/)".

Signed-off-by: Hui Zhu <>
Cc: Arjan van de Ven <>
Cc: Michal Marek <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years teach git log to use --no-color
Richard Kennedy [Tue, 2 Feb 2010 21:44:07 +0000 (13:44 -0800)] teach git log to use --no-color

When git has been set to always use color in .gitconfig then I get the
warning message

        Bad divisor in main::vcs_assign: 0

This is caused by vcs_file_signoffs not matching any commits due to the
pattern not understand the colour codes.  Fix this by telling git log to
never use colour.

Signed-off-by: Richard Kennedy <>
Acked-by: Joe Perches <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agodevmem: fix kmem write bug on memory holes
Wu Fengguang [Tue, 2 Feb 2010 21:44:06 +0000 (13:44 -0800)]
devmem: fix kmem write bug on memory holes

write_kmem() used to assume vwrite() always return the full buffer length.
However now vwrite() could return 0 to indicate memory hole.  This
creates a bug that "buf" is not advanced accordingly.

Fix it to simply ignore the return value, hence the memory hole.

Signed-off-by: Wu Fengguang <>
Cc: Andi Kleen <>
Cc: Benjamin Herrenschmidt <>
Cc: Christoph Lameter <>
Cc: Ingo Molnar <>
Cc: Tejun Heo <>
Cc: Nick Piggin <>
Cc: KAMEZAWA Hiroyuki <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agodevmem: check vmalloc address on kmem read/write
KAMEZAWA Hiroyuki [Tue, 2 Feb 2010 21:44:05 +0000 (13:44 -0800)]
devmem: check vmalloc address on kmem read/write

Otherwise vmalloc_to_page() will BUG().

This also makes the kmem read/write implementation aligned with mem(4):
"References to nonexistent locations cause errors to be returned." Here we
return -ENXIO (inspired by Hugh) if no bytes have been transfered to/from
user space, otherwise return partial read/write results.

Signed-off-by: KAMEZAWA Hiroyuki <>
Signed-off-by: Wu Fengguang <>
Cc: Greg Kroah-Hartman <>
Cc: Hugh Dickins <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agomm: flush dcache before writing into page to avoid alias
anfei zhou [Tue, 2 Feb 2010 21:44:02 +0000 (13:44 -0800)]
mm: flush dcache before writing into page to avoid alias

The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

write to page;

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

int val = 0x11111111;
fd = open("abc", O_RDWR);
addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
*(addr+0) = 0x44444444;
tmp = *(addr+0);
*(addr+1) = 0x77777777;
write(fd, &val, sizeof(int));

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei <>
Cc: Russell King <>
Cc: Miklos Szeredi <>
Cc: Nick Piggin <>
Cc: <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
12 years agokfifo: fix kernel-doc notation
Randy Dunlap [Tue, 2 Feb 2010 21:44:01 +0000 (13:44 -0800)]
kfifo: fix kernel-doc notation

Fix kfifo kernel-doc warnings:

Warning(kernel/kfifo.c:361): No description found for parameter 'total'
Warning(kernel/kfifo.c:402): bad line:  @ @lenout: pointer to output variable with copied data
Warning(kernel/kfifo.c:412): No description found for parameter 'lenout'

Signed-off-by: Randy Dunlap <>
Cc: Stefani Seibold <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>