linux-2.6.git
16 years ago[PATCH] m68knommu: add ColdFire 5208 configure support
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: add ColdFire 5208 configure support

Added support for the new Freescale 5208 ColdFire processor.
Also changed name "Motorola" to new company name "Freescale".

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driver
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driver

Add support for the Freescale 5208 processor UART's to the common
ColdFire serial port code.

Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: align param section and add 5208EVB linker support
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: align param section and add 5208EVB linker support

Align the param section. It can end up starting on an unalingned
boundary depending on the size of ksymtab_strings. If it is
unaligned things like modules will fail to load with unaligned
access traps.

Add linker scipt support for the M5208EVB board.
Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: handle non base address 0 memory of M5208EVB board
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: handle non base address 0 memory of M5208EVB board

The Freescale M5208EVB ColdFire eval board is one of the few that
doesn't have its DRAM based at address 0. Handle this special case
in the common ColdFire startup code.

Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: modify the ColdFire PIT timer for new 5208
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: modify the ColdFire PIT timer for new 5208

Modified common ColdFire PIT timer code to support the 5208 as well.
It uses a different set of mask and interrupt bits than other ColdFire
processors. The defines for these bits have been moved in header
files and set appropriately for the different processor varients.
Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: platform config code for 5208 ColdFire
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: platform config code for 5208 ColdFire

Platform configuration code for the Freescale 5208 ColdFire processor.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: add ColdFire 5208 and M5208EVB build support
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: add ColdFire 5208 and M5208EVB build support

Add build support for the new Freescale 5208 ColdFire processor,
and its M5208EVB eval board. Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] check for failed kmalloc in inftlmount.c
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] check for failed kmalloc in inftlmount.c

The INFTL mount code contains a kmalloc() followed by a memset() without
handling a possible memory allocation failure.

Signed-off-by: <panagiotis.issaris@mech.kuleuven.ac.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: use the ColdFire PIT timer for new 5208
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: use the ColdFire PIT timer for new 5208

The Freescale 5208 ColdFire uses the common PIT timer code for
its internal timer. Build it when configured for the 5208 processor.
Add support for the internal register map of the 5208 ColdFire fmaily.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: add 5208 ColdFire platform Makefile
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: add 5208 ColdFire platform Makefile

Add Freescale 5208 ColdFire platform Makefile.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68knommu: add ColdFire 5208 setup support
Greg Ungerer [Mon, 7 Nov 2005 04:09:50 +0000 (14:09 +1000)]
[PATCH] m68knommu: add ColdFire 5208 setup support

Add setup support for the new Freescale 5208 ColdFire processor.
(Also fixed a little typo in there, "UNKOWN" -> "UNKNOWN").
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] max1619 fix
Andrew Morton [Mon, 7 Nov 2005 09:01:49 +0000 (01:01 -0800)]
[PATCH] max1619 fix

Something horrid has happened to the indenting and braces in this function,
producing a warning:

drivers/hwmon/max1619.c: In function `max1619_detect':
drivers/hwmon/max1619.c:196: warning: `man_id' might be used uninitialized in this function
drivers/hwmon/max1619.c:196: warning: `chip_id' might be used uninitialized in this function

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/pnp/: cleanups
Adrian Bunk [Mon, 7 Nov 2005 09:01:48 +0000 (01:01 -0800)]
[PATCH] drivers/pnp/: cleanups

This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global function:
  - core.c: pnp_remove_device
- #if 0 the following unneeded EXPORT_SYMBOL's:
  - card.c: pnp_add_card
  - card.c: pnp_remove_card
  - card.c: pnp_add_card_device
  - card.c: pnp_remove_card_device
  - card.c: pnp_add_card_id
  - core.c: pnp_register_protocol
  - core.c: pnp_unregister_protocol
  - core.c: pnp_add_device
  - core.c: pnp_remove_device
  - pnpacpi/core.c: pnpacpi_protocol
  - driver.c: pnp_add_id
  - isapnp/core.c: isapnp_read_byte
  - manager.c: pnp_auto_config_dev
  - resource.c: pnp_register_dependent_option
  - resource.c: pnp_register_independent_option
  - resource.c: pnp_register_irq_resource
  - resource.c: pnp_register_dma_resource
  - resource.c: pnp_register_port_resource
  - resource.c: pnp_register_mem_resource

Note that this patch #if 0's exactly one functions and removes no
functions.  Most it does is the #if 0 of EXPORT_SYMBOL's, so if any modular
code will use any of them, re-adding will be trivial.

Modular ISAPnP might be interesting in some cases, but this is more legacy
code.  If someone would work on it to sort all the issues out (starting
with the point that most users of __ISAPNP__ will have to be fixed)
re-enabling the required EXPORT_SYMBOL's won't be hard for him.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport phys_proc_id and cpu_core_id
Adrian Bunk [Mon, 7 Nov 2005 09:01:46 +0000 (01:01 -0800)]
[PATCH] unexport phys_proc_id and cpu_core_id

EXPORT_SYMBOL's for phys_proc_id and cpu_core_id were added this year but
never used.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fs/super.c: unexport user_get_super
Adrian Bunk [Mon, 7 Nov 2005 09:01:46 +0000 (01:01 -0800)]
[PATCH] fs/super.c: unexport user_get_super

There's no modular usage in the kernel and modules shouldn't use this
symbol.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] sound/oss/sequencer_syms: unexport reprogram_timer
Adrian Bunk [Mon, 7 Nov 2005 09:01:45 +0000 (01:01 -0800)]
[PATCH] sound/oss/sequencer_syms: unexport reprogram_timer

This patch remoes an unneeded EXPORT_SYMBOL.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] __deprecated_for_modules: panic_timeout
Adrian Bunk [Mon, 7 Nov 2005 09:01:44 +0000 (01:01 -0800)]
[PATCH] __deprecated_for_modules: panic_timeout

This looks like something which out-of-tree code could possibly be using.
Give panic_timeout the twelve-month treatment.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] __deprecated_for_modules: insert_resource
Adrian Bunk [Mon, 7 Nov 2005 09:01:44 +0000 (01:01 -0800)]
[PATCH] __deprecated_for_modules: insert_resource

This looks like something which out-of-tree code could possibly be using.
Give insert_resource the twelve-month treatment.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport uts_sem
Adrian Bunk [Mon, 7 Nov 2005 09:01:43 +0000 (01:01 -0800)]
[PATCH] unexport uts_sem

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport idle_cpu
Adrian Bunk [Mon, 7 Nov 2005 09:01:42 +0000 (01:01 -0800)]
[PATCH] unexport idle_cpu

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] mm/swap_state.c: unexport swapper_space
Adrian Bunk [Mon, 7 Nov 2005 09:01:41 +0000 (01:01 -0800)]
[PATCH] mm/swap_state.c: unexport swapper_space

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] mm/swapfile.c: unexport total_swap_pages
Adrian Bunk [Mon, 7 Nov 2005 09:01:41 +0000 (01:01 -0800)]
[PATCH] mm/swapfile.c: unexport total_swap_pages

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] mm/swap.c: unexport vm_acct_memory
Adrian Bunk [Mon, 7 Nov 2005 09:01:40 +0000 (01:01 -0800)]
[PATCH] mm/swap.c: unexport vm_acct_memory

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport console_unblank
Adrian Bunk [Mon, 7 Nov 2005 09:01:39 +0000 (01:01 -0800)]
[PATCH] unexport console_unblank

I didn't find any possible modular usage of console_unblank in the
kernel.

This patch was already ACK'ed by Alan Cox.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport nr_swap_pages
Adrian Bunk [Mon, 7 Nov 2005 09:01:39 +0000 (01:01 -0800)]
[PATCH] unexport nr_swap_pages

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport clear_page_dirty_for_io
Adrian Bunk [Mon, 7 Nov 2005 09:01:38 +0000 (01:01 -0800)]
[PATCH] unexport clear_page_dirty_for_io

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] unexport hugetlb_total_pages
Adrian Bunk [Mon, 7 Nov 2005 09:01:37 +0000 (01:01 -0800)]
[PATCH] unexport hugetlb_total_pages

I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] mm/{mmap,nommu}.c: several unexports
Adrian Bunk [Mon, 7 Nov 2005 09:01:37 +0000 (01:01 -0800)]
[PATCH] mm/{mmap,nommu}.c: several unexports

I didn't find any possible modular usage in the kernel.

This patch was already ACK'ed by Christoph Hellwig.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: security
Jesper Juhl [Mon, 7 Nov 2005 09:01:35 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: security

This is the security/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in security/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: arch
Jesper Juhl [Mon, 7 Nov 2005 09:01:35 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: arch

This is the arch/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in arch/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: fs
Jesper Juhl [Mon, 7 Nov 2005 09:01:34 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: fs

This is the fs/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in fs/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: misc remaining drivers
Jesper Juhl [Mon, 7 Nov 2005 09:01:32 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: misc remaining drivers

This is the remaining misc drivers/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in misc files in
drivers/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/media
Jesper Juhl [Mon, 7 Nov 2005 09:01:31 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/media

This is the drivers/media/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/media/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Cc: Michael Krufky <mkrufky@m1k.net>
Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Acked-by : Manu Abraham <manu@linuxtv.org>
Acked-by: Andreas Oberritter <obi@linuxtv.org>
Acked-by: Wilson Michaels <wilsonmichaels@earthlink.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/s390
Jesper Juhl [Mon, 7 Nov 2005 09:01:30 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/s390

This is the drivers/s390/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/s390/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Cornelia Huck <cohuck@de.ibm.com>
Acked-by: Stefan Bader <Stefan.Bader@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/isdn
Jesper Juhl [Mon, 7 Nov 2005 09:01:29 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/isdn

This is the drivers/isdn/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/isdn/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/char
Jesper Juhl [Mon, 7 Nov 2005 09:01:29 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/char

This is the drivers/char/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/char/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/mtd
Jesper Juhl [Mon, 7 Nov 2005 09:01:27 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/mtd

This is the drivers/mtd part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/mtd/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kfree cleanup: drivers/scsi
Jesper Juhl [Mon, 7 Nov 2005 09:01:26 +0000 (01:01 -0800)]
[PATCH] kfree cleanup: drivers/scsi

This is the drivers/scsi/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] bluetooth: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:26 +0000 (01:01 -0800)]
[PATCH] bluetooth: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ide: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:25 +0000 (01:01 -0800)]
[PATCH] ide: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/firmware: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:24 +0000 (01:01 -0800)]
[PATCH] drivers/firmware: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/fc4: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:24 +0000 (01:01 -0800)]
[PATCH] drivers/fc4: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/eisa: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:23 +0000 (01:01 -0800)]
[PATCH] drivers/eisa: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/dio: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:22 +0000 (01:01 -0800)]
[PATCH] drivers/dio: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/cdrom: kmalloc + memset -> kzalloc conversion
Deepak Saxena [Mon, 7 Nov 2005 09:01:22 +0000 (01:01 -0800)]
[PATCH] drivers/cdrom: kmalloc + memset -> kzalloc conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] serial: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:21 +0000 (01:01 -0800)]
[PATCH] serial: fix-up schedule_timeout() usage

Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/scsi: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:20 +0000 (01:01 -0800)]
[PATCH] drivers/scsi: fix-up schedule_timeout() usage

Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] message: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:19 +0000 (01:01 -0800)]
[PATCH] message: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/media: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:18 +0000 (01:01 -0800)]
[PATCH] drivers/media: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/md: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:17 +0000 (01:01 -0800)]
[PATCH] drivers/md: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/macintosh: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:17 +0000 (01:01 -0800)]
[PATCH] drivers/macintosh: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] isdn: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:16 +0000 (01:01 -0800)]
[PATCH] isdn: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ieee1394: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:15 +0000 (01:01 -0800)]
[PATCH] ieee1394: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] drivers/acpi: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:14 +0000 (01:01 -0800)]
[PATCH] drivers/acpi: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
msecs_to_jiffies() instead of direct HZ division to avoid rounding errors.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] um: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:14 +0000 (01:01 -0800)]
[PATCH] um: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ppc: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:13 +0000 (01:01 -0800)]
[PATCH] ppc: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded HZ division to avoid
rounding errors.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] m68k: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:12 +0000 (01:01 -0800)]
[PATCH] m68k: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ia64: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 7 Nov 2005 09:01:11 +0000 (01:01 -0800)]
[PATCH] ia64: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kernel-doc: fix warnings in vmalloc.c
Randy Dunlap [Mon, 7 Nov 2005 09:01:10 +0000 (01:01 -0800)]
[PATCH] kernel-doc: fix warnings in vmalloc.c

Fix new kernel-doc errors in vmalloc.c.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ramfs, rootfs, and initramfs docs
Rob Landley [Mon, 7 Nov 2005 09:01:09 +0000 (01:01 -0800)]
[PATCH] ramfs, rootfs, and initramfs docs

Docs for ramfs, rootfs, and initramfs.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] VFS: split dentry locking documentation
Pekka Enberg [Mon, 7 Nov 2005 09:01:09 +0000 (01:01 -0800)]
[PATCH] VFS: split dentry locking documentation

This patch splits dentry locking documentation from
Documentation/filesystems/vfs.txt to a separate file.  The dentry locking
bits are useful but do not fit into the VFS overview document as is.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] VFS: update overview document
Pekka Enberg [Mon, 7 Nov 2005 09:01:08 +0000 (01:01 -0800)]
[PATCH] VFS: update overview document

This patch updates the Documentation/filesystems/vfs.txt document.  I
rearranged and rewrote parts of the introduction chapter and added better
headings for each section.  I also added a description for the inode
rename() operation which was missing and added links to some useful
external VFS documentation.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kernel-docs: fix kernel-doc format problems
Randy Dunlap [Mon, 7 Nov 2005 09:01:07 +0000 (01:01 -0800)]
[PATCH] kernel-docs: fix kernel-doc format problems

Convert to proper kernel-doc format.

Some have extra blank lines (not allowed immed.  after the function name)
or need blank lines (after all parameters).  Function summary must be only
one line.

Colon (":") in a function description does weird things (causes kernel-doc
to think that it's a new section head sadly).

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] more kernel-doc cleanups, additions
Randy Dunlap [Mon, 7 Nov 2005 09:01:06 +0000 (01:01 -0800)]
[PATCH] more kernel-doc cleanups, additions

Various core kernel-doc cleanups:
- add missing function parameters in ipc, irq/manage, kernel/sys,
  kernel/sysctl, and mm/slab;
- move description to just above function for kernel_restart()

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] Doc/hpet.txt: change to < 80 columns
Randy Dunlap [Mon, 7 Nov 2005 09:01:06 +0000 (01:01 -0800)]
[PATCH] Doc/hpet.txt: change to < 80 columns

Put text into < 80 columns.  No other changes.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] kernel-doc: fix some kernel-api warnings
Randy Dunlap [Mon, 7 Nov 2005 09:01:05 +0000 (01:01 -0800)]
[PATCH] kernel-doc: fix some kernel-api warnings

Fix various warnings in kernel-doc:

Warning(linux-2614-rc4//include/linux/net.h:89): Enum value 'SOCK_DCCP' not described in enum 'sock_type'

usercopy.c: should use !E instead of !I for exported symbols:
Warning(linux-2614-rc4//arch/i386/lib/usercopy.c): no structured comments found

fs.h does not need to use !E since it has no exported symbols:
Warning(linux-2614-rc4//include/linux/fs.h:1182): No description found for parameter 'find_exported_dentry'
Warning(linux-2614-rc4//include/linux/fs.h): no structured comments found

irq/manage.c should use !E for its exported symbols:
Warning(linux-2614-rc4//kernel/irq/manage.c): no structured comments found

macmodes.c should use !E for its exported symbols:
Warning(linux-2614-rc4//drivers/video/macmodes.c): no structured comments found

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] jbd doc: fix some kernel-doc warnings
Randy Dunlap [Mon, 7 Nov 2005 09:01:04 +0000 (01:01 -0800)]
[PATCH] jbd doc: fix some kernel-doc warnings

Add structure fields kernel-doc for 2 fields in struct journal_s.

Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbuf'
Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbufsize'

Convert fs/jbd/recovery.c non-static functions to kernel-doc format.

fs/jbd/recovery.c doesn't export any symbols, so it should use
!I instead of !E to eliminate this warning message:

Warning(/var/linsrc/linux-2614-rc4//fs/jbd/recovery.c): no structured comments found

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] Doc/MSI-HOWTO: cleanups
Randy Dunlap [Mon, 7 Nov 2005 09:01:03 +0000 (01:01 -0800)]
[PATCH] Doc/MSI-HOWTO: cleanups

Clean up typos, kernel function interfaces, acronyms, add whitespace,
improve readability.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] ksymoops related docs update
Jesper Juhl [Mon, 7 Nov 2005 09:01:03 +0000 (01:01 -0800)]
[PATCH] ksymoops related docs update

Update ksymoops related documentation to reflect current 2.6 reality.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] Documentation/sparse.txt: mention CF=-Wbitwise
Alexey Dobriyan [Mon, 7 Nov 2005 09:01:02 +0000 (01:01 -0800)]
[PATCH] Documentation/sparse.txt: mention CF=-Wbitwise

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] Fix dm-snapshot tutorial in Documentation
Paolo 'Blaisorblade' Giarrusso [Mon, 7 Nov 2005 09:01:01 +0000 (01:01 -0800)]
[PATCH] Fix dm-snapshot tutorial in Documentation

I've recently added this documentation, Alasdair gave some corrections, and
here are some further corrections on top of his work (partly style issue,
partly a technical error due to different past experience, partly a note
which I've added - i.e.  transient snapshots are lighter).

Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] matroxfb: Set maxhipri to 0
Ville Syrjälä [Mon, 7 Nov 2005 09:01:00 +0000 (01:01 -0800)]
[PATCH] matroxfb: Set maxhipri to 0

The current init code sets hiprilvl to 0 and maxhipri to 5.  According to the
specs those values are illegal on both G200 and G400.  It also causes
distortions on the TV-out at least when CRTC2 is in YUV mode as is the case
with DirectFB.  This patch resets both values to 0.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] matroxfb: Kill a useless message
Ville Syrjälä [Mon, 7 Nov 2005 09:00:59 +0000 (01:00 -0800)]
[PATCH] matroxfb: Kill a useless message

No point in spamming the logs with a message about xres rounding.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] matroxfb: Use CACHEFLUSH on all chips
Ville Syrjälä [Mon, 7 Nov 2005 09:00:58 +0000 (01:00 -0800)]
[PATCH] matroxfb: Use CACHEFLUSH on all chips

Use the CACHEFLUSH register on all chip types.  The register is listed in all
other specs except 2064W.  However I have verified that the register does work
on a 2064W despite being marked reserved in the specs.  There were no
noticeable side effects after writing to the register.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] matroxfb: Add support for Mystique AGP
Ville Syrjälä [Mon, 7 Nov 2005 09:00:57 +0000 (01:00 -0800)]
[PATCH] matroxfb: Add support for Mystique AGP

Add new entries for Mystique AGP with the PCI ID 0x051e.

I don't actually have such boards but according to google they do exist.
Curiosly X.Org doesn't recognize that PCI ID.  And what's even more
interesting is that Matrox's own Windows drivers don't recognize it either.
After going through about a dozen different versions I did find one older
driver that does list this particular ID.  It is also listed in the pci.ids
file.

I'm not sure if non-220 AGP chips exist.  I left the chip revision check
intact for AGP chips nonetheless.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] matroxfb: Remove an unused wait queue entry
Ville Syrjälä [Mon, 7 Nov 2005 09:00:56 +0000 (01:00 -0800)]
[PATCH] matroxfb: Remove an unused wait queue entry

wait_event_event_interruptible() uses a private wait queue entry so there's no
need for the caller to initialize one.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: ATI RN50 pci id
Jake Moilanen [Mon, 7 Nov 2005 09:00:55 +0000 (01:00 -0800)]
[PATCH] fbdev: ATI RN50 pci id

Here's the PCI ID for the ATI RN50 chip.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: Convert a few drivers to use the fb_find_best_display helper
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:55 +0000 (01:00 -0800)]
[PATCH] fbdev: Convert a few drivers to use the fb_find_best_display helper

Convert i810fb, nvidiafb and savagefb to use the fb_find_best_display helper
when searching for the initial video mode.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: Add helper to get an appropriate initial mode
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:54 +0000 (01:00 -0800)]
[PATCH] fbdev: Add helper to get an appropriate initial mode

Add new helper, fb_find_best_display(), which will search the modelist for the
best mode for the attached display.  This requires an EDID block that is
converted to struct fb_monspecs and a private modelist.  The search will be
done in this manner:

- if 1st detailed timing is preferred, use that
- else if dimensions of the display are known, use that to estimate xres and
- else if modelist has detailed timings, use the first detailed timing
- else, use the very first entry from the modelist

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: Rearrange mode database entries
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:53 +0000 (01:00 -0800)]
[PATCH] fbdev: Rearrange mode database entries

Rearrange mode database entries such that preferred timings are entered first,
and less preferred timings are entered last.  (Detailed, VESA,
established/standard).

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbcon: Add rl (Roman Large) font
Zach Smith [Mon, 7 Nov 2005 09:00:52 +0000 (01:00 -0800)]
[PATCH] fbcon: Add rl (Roman Large) font

I converted the "rl" console font from the kbd utility to be a built-in font
for the framebuffer console, and I was wondering if you would be OK with
including it.  I've generated a font_rl.c file and related minor
modifications.  I find it's the most visually appealing of the kbd fonts which
is why I use it and selected it for conversion.  I believe the font is GPL'd.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] console: Fix compile error
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:51 +0000 (01:00 -0800)]
[PATCH] console: Fix compile error

Fix following compile error (From Kernel Bugzilla Bug 5427):

include/linux/console_struct.h:53: error: field `vt_mode' has incomplete type

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] i810fb: Cleanup I2C code
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:50 +0000 (01:00 -0800)]
[PATCH] i810fb: Cleanup I2C code

- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] vesafb: Disable mtrr as the default
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:49 +0000 (01:00 -0800)]
[PATCH] vesafb: Disable mtrr as the default

vesafb occassionally gets the size wrong when setting the mtrr.  When X or DRI
attempts to set the mtrr, it will fail due to range overlap significantly
affecting their performance.  Disable mtrr and let the user explicitly enable
it with the mtrr:n option.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] s3c2410fb: initialise device_driver .owner
Ben Dooks [Mon, 7 Nov 2005 09:00:48 +0000 (01:00 -0800)]
[PATCH] s3c2410fb: initialise device_driver .owner

Initialise the .owner field, so that if the driver is built as a module, the
system has a link to the owner

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: fix the fb_find_nearest_mode() function
Michal Januszewski [Mon, 7 Nov 2005 09:00:47 +0000 (01:00 -0800)]
[PATCH] fbdev: fix the fb_find_nearest_mode() function

Currently the fb_find_nearest_mode() function finds a mode with screen
resolution closest to that described by the 'var' argument and with some
arbitrary refresh rate (eg.  in the following sequence of refresh rates: 70 60
53 85 75, 53 is selected).

This patch fixes the function so that it looks for the closest mode as far as
both resolution and refresh rate are concerned.  The function's first argument
is changed to fb_videomode so that the refresh rate can be specified by the
caller, as fb_var_screeninfo doesn't have any fields that could directly hold
this data.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] nvidiafb: Fix empty macro
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:46 +0000 (01:00 -0800)]
[PATCH] nvidiafb: Fix empty macro

Use do {} while(0) for empty reverse_order() macro.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: Workaround for buggy EDID blocks
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:46 +0000 (01:00 -0800)]
[PATCH] fbdev: Workaround for buggy EDID blocks

Some EDID blocks set the flag "prefer first detailed timing" without providing
any detailed timing at all.  Clear this flag if the block does not provide
detailed timings.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] pm2fb: Manual configuration of timings for Elsa Winner 2000 Office
Peter 'p2' De Schrijver [Mon, 7 Nov 2005 09:00:42 +0000 (01:00 -0800)]
[PATCH] pm2fb: Manual configuration of timings for Elsa Winner 2000 Office

Attached is a small patch which configures the correct memory clock and
timings on the Elsa Winner 2000 Office pm2 based card.  This is necessary when
the card is used on a platform which does not support PC style BIOS
initialization.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] savagefb: Convert from VGA IO access to MMIO access
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:41 +0000 (01:00 -0800)]
[PATCH] savagefb: Convert from VGA IO access to MMIO access

Use MMIO registers instead of banging the VGA IO registers.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] atyfb: Get initial mode timings from LCD BIOS
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:41 +0000 (01:00 -0800)]
[PATCH] atyfb: Get initial mode timings from LCD BIOS

Reported by: Jean-Philippe Guérard (Bugzilla Bug 1782)

"I've tried with video=atyfb:debug and video=atyfb:debug,mode:1280x600, \
nomtrr.

In both case, the screen stays black, but seems divided into 4 vertical bands.
 Some white lines pop up randomly on each vertical band."

The problem is a combination of an incorrect xclk plus lack of timing
information.  The adapter is attached to an LCD device that can do 1280x600
(which is not a standard resolution).  The global mode database does not have
an entry for it.  Fortunately, the Video BIOS contains the complete timing
info for this display, however, atyfb is not making use of it.

Add support to get the timing information from the BIOS, if available.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] vesafb: Fix color palette handling
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:40 +0000 (01:00 -0800)]
[PATCH] vesafb: Fix color palette handling

Fix out-of-bounds bug.  The pseudopalette has room only for 16 entries, thus,
write only the first 16 entries to the pseudopalette.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbdev: Remove software clipping from drawing functions
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:39 +0000 (01:00 -0800)]
[PATCH] fbdev: Remove software clipping from drawing functions

Remove software clipping from imageblit, fillrect and copyarea.  Clipping is
not needed because the console layer assures that reads/writes doest not
happen beyond the extents of the framebuffer.  And software clipping tends to
hide bugs, if they do exist.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbcon: Initialize new driver when old driver is released
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:38 +0000 (01:00 -0800)]
[PATCH] fbcon: Initialize new driver when old driver is released

If machine has more than 1 driver installed, and they all drive the same
hardware, it's possible that the driver's fb_release() method will attempt to
restore the hardware state to the initial state.  This will leave the new
driver in an undefined state.  To prevent this problem, initialize the new
driver by calling fb_set_par() when the old driver is released by fbcon.

Signed-off-by: Antonino Daplas<adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbcon: Use helper function when filling out var structure
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:37 +0000 (01:00 -0800)]
[PATCH] fbcon: Use helper function when filling out var structure

Instead of manually filling up the fields in struct fb_var_screeninfo, use the
display_to_var() helper.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbcon: Consolidate redundant code
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:36 +0000 (01:00 -0800)]
[PATCH] fbcon: Consolidate redundant code

Lot's of redundant code scattered throughout fbcon.c.  Consolidate them all
into one function, fbcon_update_softback().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon
Antonino A. Daplas [Mon, 7 Nov 2005 09:00:35 +0000 (01:00 -0800)]
[PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon

According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] radeonfb: prevent spurious recompilations
Jean Delvare [Mon, 7 Nov 2005 09:00:34 +0000 (01:00 -0800)]
[PATCH] radeonfb: prevent spurious recompilations

Prevent spurious recompilations of the radeonfb driver when I2C/DDC support
is not included and i2c header files are modified.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] intelfb: extend partial support of i915G to include i915GM
Scott MacKenzie [Mon, 7 Nov 2005 09:00:33 +0000 (01:00 -0800)]
[PATCH] intelfb: extend partial support of i915G to include i915GM

Add partial support for GMA900 within the i915GM chipset.

Signed-off-by: Scott MacKenzie <irrational@poboxes.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
16 years ago[PATCH] nvidiafb: Add flat panel dither support
Benjamin Herrenschmidt [Mon, 7 Nov 2005 09:00:32 +0000 (01:00 -0800)]
[PATCH] nvidiafb: Add flat panel dither support

nvidiafb didn't fully hook-up the code it borrowed from X for doing flat
panel dithering (this is useful for 6 bits panels).  This adds a driver
option to force it, and by default "reads" the current value from the chip
to get the firmware setting.  It significantly improves the quality of
images on the iMac G5 I have here (though the X driver doesn't yet "read"
the current value and defaults to 0, so you have to add Option "FBDither"
"true" to your X config file to get that, I'll try to fix X.org to "read"
the default unless specified asap).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>