linux-2.6.git
13 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 17 Mar 2009 09:37:37 +0000 (10:37 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

13 years agotracing: fix leak in event_format_read()
Tom Zanussi [Tue, 17 Mar 2009 06:20:59 +0000 (01:20 -0500)]
tracing: fix leak in event_format_read()

Impact: fix memory leak

If event_format_read() exits early due to nonzero ppos, the
previous kmalloc doesn't get freed - might as well do the
check before the kmalloc and avoid the problem.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237270859.8033.141.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'tracing/syscalls' into tracing/core
Ingo Molnar [Tue, 17 Mar 2009 07:37:20 +0000 (08:37 +0100)]
Merge branch 'tracing/syscalls' into tracing/core

13 years agotracing: stop comm recording on tracing off
Steven Rostedt [Tue, 17 Mar 2009 01:57:17 +0000 (21:57 -0400)]
tracing: stop comm recording on tracing off

Impact: fix for losing comms in trace

The command lines of tasks are cached at sched switch to not need
to record them at every trace point.  Disabling the tracing on stops
the recording of traces, but does not stop the caching of command lines.
When the tracing is off the cache may overflow and cause the tracing
to show incorrect tasks matching the PIDs.

This patch disables prevents updates to the comm cache when the ring buffer
is off.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: protect reader of cmdline output
Steven Rostedt [Mon, 16 Mar 2009 23:20:15 +0000 (19:20 -0400)]
tracing: protect reader of cmdline output

Impact: fix to one cause of incorrect comm outputs in trace

The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.

This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing/ftrace: fix the check on nopped sites
Frederic Weisbecker [Mon, 16 Mar 2009 21:41:00 +0000 (22:41 +0100)]
tracing/ftrace: fix the check on nopped sites

Impact: fix a dynamic tracing failure

Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:

fa9d13cf135efbd454453a53b6299976bea245a9
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)

The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing/core: fix early free of cpumasks
Frederic Weisbecker [Mon, 16 Mar 2009 00:45:03 +0000 (01:45 +0100)]
tracing/core: fix early free of cpumasks

Impact: fix crashes when tracing cpumasks

While ring-buffer allocation, the cpumasks are allocated too,
including the tracing cpumask and the per-cpu file mask handler.
But these cpumasks are freed accidentally just after.
Fix it.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237164303-11476-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/ftrace: fix double calls to tracing_start()
Frederic Weisbecker [Sun, 15 Mar 2009 23:32:41 +0000 (00:32 +0100)]
tracing/ftrace: fix double calls to tracing_start()

Impact: fix a warning during preemptirqsoff selftests

When the preemptirqsoff selftest fails, we see the following
warning:

[    6.050000] Testing tracer preemptirqsoff: .. no entries found ..
------------[ cut here ]------------
[    6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3()
[    6.060000] Modules linked in:
[    6.060000] Pid: 1, comm: swapper Tainted: G
[    6.060000] Call Trace:
[    6.060000]  [<ffffffff802460ff>] warn_slowpath+0xb1/0x100
[    6.060000]  [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff802a3831>] tracing_start+0x67/0xd3
[    6.060000]  [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57
[    6.060000]  [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1
[    6.060000]  [<ffffffff802a4798>] register_tracer+0x12f/0x241
[    6.060000]  [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53
[    6.060000]  [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53

This is because in fail case, the preemptirqsoff tracer selftest calls twice
the tracing_start() function:

int
trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr)
{
        if (!ret && !count) {
                printk(KERN_CONT ".. no entries found ..");
                ret = -1;
                tracing_start(); <-----
                goto out;
        }
        [...]
out:
        trace->reset(tr);
        tracing_start(); <------
        tracing_max_latency = save_max;

        return ret;
}

Since it is well handled in the out path, we don't need the conditional one.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/core: fix missing mutex unlock on tracing_set_tracer()
Frederic Weisbecker [Sun, 15 Mar 2009 21:10:39 +0000 (22:10 +0100)]
tracing/core: fix missing mutex unlock on tracing_set_tracer()

Impact: fix possible locking imbalance

In case of ring buffer resize failure, tracing_set_tracer forgot to
release trace_types_lock. Fix it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: select kallsysms
Frederic Weisbecker [Sun, 15 Mar 2009 21:10:38 +0000 (22:10 +0100)]
tracing/syscalls: select kallsysms

Syscall tracing must select kallsysms.

The arch code builds a table to find the syscall metadata by syscall
number. It needs the syscalls names resolution from the symbol table
to know which name found on the syscalls metadatas match a function
pointer from the arch sys_call_table.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: protect thread flag toggling from races
Frederic Weisbecker [Sun, 15 Mar 2009 21:10:37 +0000 (22:10 +0100)]
tracing/syscalls: protect thread flag toggling from races

Impact: fix syscall tracer enable/disable race

The current thread flag toggling is racy as shown in the following
scenario:

- task A is the last user of syscall tracing, it releases the
  TIF_SYSCALL_FTRACE on each tasks

- at the same time task B start syscall tracing. refcount == 0 so
  it sets up TIF_SYSCALL_FTRACE on each tasks.

The effect of the mixup is unpredictable.
So this fix adds a mutex on {start,stop}_syscall_tracing().

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1237151439-6755-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: various cleanups
Frederic Weisbecker [Sun, 15 Mar 2009 21:10:36 +0000 (22:10 +0100)]
tracing/syscalls: various cleanups

Impact: cleanup

- Drop unused cpu variable
- Fix some errors on comments

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: fix missing release of tracing
Frederic Weisbecker [Sun, 15 Mar 2009 21:10:35 +0000 (22:10 +0100)]
tracing/syscalls: fix missing release of tracing

Impact: fix 'stuck' syscall tracer

The syscall tracer uses a refcounter to enable several users
simultaneously.

But the refcounter did not behave correctly and always restored
its value to 0 after calling start_syscall_tracing(). Therefore,
stop_syscall_tracing() couldn't release correctly the tasks from
tracing.

Also the tracer forgot to reset the buffer when it is released.

Drop the pointless refcount decrement on start_syscall_tracing()
and reset the buffer when we release the tracer.

This fixes two reported issue:

- when we switch from syscall tracer to another tracer, syscall
  tracing continued.

- incorrect use of the refcount.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branches 'tracing/ftrace', 'tracing/syscalls' and 'linus' into tracing/core
Ingo Molnar [Mon, 16 Mar 2009 08:12:42 +0000 (09:12 +0100)]
Merge branches 'tracing/ftrace', 'tracing/syscalls' and 'linus' into tracing/core

Conflicts:
arch/parisc/kernel/irq.c

13 years agoparisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=y
Kyle McMartin [Sat, 14 Mar 2009 23:40:59 +0000 (19:40 -0400)]
parisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=y

CC      drivers/parisc/sba_iommu.o
drivers/parisc/sba_iommu.c:1373: error: expected identifier or '('
before '}' token
make[2]: *** [drivers/parisc/sba_iommu.o] Error 1
make[1]: *** [drivers/parisc] Error 2
make: *** [drivers] Error 2

Don't know how this has gone missed for so long... clearly I need
to do builds on my C8000 more often.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 15 Mar 2009 20:34:56 +0000 (13:34 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  [ARM] Fix virtual to physical translation macro corner cases
  [ARM] update mach-types
  [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions
  MX1 fix include
  [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info
  [ARM] 5418/1: restore lr before leaving mcount
  ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz
  ARM: OMAP: Allow I2C bus driver to be compiled as a module
  ARM: OMAP: sched_clock() corrected
  ARM: OMAP: Fix compile error if pm.h is included
  [ARM] orion5x: pass dram mbus data to xor driver
  [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c
  [ARM] S3C64XX: Fix USB host clock mux list
  [ARM] S3C64XX: Fix name of USB host clock.
  [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH
  [ARM] S3C64XX: Do gpiolib configuration earlier
  [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint()
  [ARM] SMDK6410: Declare iodesc table static
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sat, 14 Mar 2009 20:43:18 +0000 (13:43 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Fix Xilinx SystemACE driver to handle empty CF slot
  block: fix memory leak in bio_clone()
  block: Add gfp_mask parameter to bio_integrity_clone()

13 years agoFix Xilinx SystemACE driver to handle empty CF slot
Grant Likely [Mon, 9 Mar 2009 12:42:24 +0000 (13:42 +0100)]
Fix Xilinx SystemACE driver to handle empty CF slot

The SystemACE driver does not handle an empty CF slot gracefully. An
empty CF slot ends up hanging the system. This patch adds a check for
the CF state and stops trying to process requests if the slot is empty.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
13 years agoblock: fix memory leak in bio_clone()
Li Zefan [Mon, 9 Mar 2009 09:42:45 +0000 (10:42 +0100)]
block: fix memory leak in bio_clone()

If bio_integrity_clone() fails, bio_clone() returns NULL without freeing
the newly allocated bio.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
13 years agoblock: Add gfp_mask parameter to bio_integrity_clone()
un'ichi Nomura [Mon, 9 Mar 2009 09:40:52 +0000 (10:40 +0100)]
block: Add gfp_mask parameter to bio_integrity_clone()

Stricter gfp_mask might be required for clone allocation.
For example, request-based dm may clone bio in interrupt context
so it has to use GFP_ATOMIC.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
13 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Sat, 14 Mar 2009 19:02:21 +0000 (12:02 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Mark Eins: Fix configuration.
  MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Sat, 14 Mar 2009 19:01:37 +0000 (12:01 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (31 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k4.
  [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
  [SCSI] qla2xxx: Correct truncation in return-code status checking.
  [SCSI] qla2xxx: Correct vport delete bug.
  [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
  [SCSI] qla2xxx: Correct address range checking for option-rom updates.
  [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20
  [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3)
  [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status
  [SCSI] fcoe: fix kfree(skb)
  [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway
  [SCSI] libfc: do not change the fh_rx_id of a recevied frame
  [SCSI] fcoe: Correct fcoe_transports initialization vs. registration
  [SCSI] fcoe: Use setup_timer() and mod_timer()
  [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper
  [SCSI] libfc, fcoe: Cleanup function formatting and minor typos
  [SCSI] libfc, fcoe: Fix kerneldoc comments
  [SCSI] libfc: Cleanup libfc_function_template comments
  [SCSI] libfc: check for err when recv and state is incorrect
  [SCSI] libfc: rename rp to rdata in fc_disc_new_target()
  ...

13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 14 Mar 2009 19:00:42 +0000 (12:00 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_piix: add workaround for Samsung DB-P70
  libata: Keep shadow last_ctl up to date during resets
  sata_mv: fix MSI irq race condition

13 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Sat, 14 Mar 2009 19:00:18 +0000 (12:00 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix the fix to Bugzilla #11061, when IPv6 isn't defined...
  SUNRPC: xprt_connect() don't abort the task if the transport isn't bound
  SUNRPC: Fix an Oops due to socket not set up yet...
  Bug 11061, NFS mounts dropped
  NFS: Handle -ESTALE error in access()
  NLM: Fix GRANT callback address comparison when IPv6 is enabled
  NLM: Shrink the IPv4-only version of nlm_cmp_addr()
  NFSv3: Fix posix ACL code
  NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2)
  SUNRPC: Tighten up the task locking rules in __rpc_execute()

13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Sat, 14 Mar 2009 18:59:22 +0000 (11:59 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Use xs->bucket to set xattr value outside
  ocfs2: Fix a bug found by sparse check.
  ocfs2: tweak to get the maximum inline data size with xattr
  ocfs2: reserve xattr block for new directory with inline data

13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 14 Mar 2009 18:59:05 +0000 (11:59 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10978): Report tuning algorith correctly
  V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument
  V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod.
  V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative
  V4L/DVB (10974): Use Diseqc 3/3 mode to send data
  V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix
  V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes
  V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a
  V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks.

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29
Linus Torvalds [Sat, 14 Mar 2009 18:58:38 +0000 (11:58 -0700)]
Merge git://git./linux/kernel/git/kyle/parisc-2.6.29

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29:
  parisc: update defconfigs
  parisc: define x->x mmio accessors
  parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()
  parisc: convert cpu_check_affinity to new cpumask api
  parisc: convert (read|write)bwlq to inlines
  parisc: fix use of new cpumask api in irq.c
  parisc: update parisc for new irq_desc
  parisc: update MAINTAINERS
  parisc: fix wrong assumption about bus->self
  parisc: fix 64bit build
  parisc: add braces around arguments in assembler macros
  parisc: fix dev_printk() compile warnings for accessing a device struct
  parisc: remove unused local out_putf label
  parisc: fix `struct pt_regs' declared inside parameter list warning
  parisc: fix section mismatch warnings
  parisc: remove klist iterators
  parisc: BUG_ON() cleanup

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sat, 14 Mar 2009 18:58:10 +0000 (11:58 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: save the returned value of dma_map_sg
  ide-floppy: do not map dataless cmds to an sg

13 years agovmscan: pgmoved should be cleared after updating recent_rotated
Daisuke Nishimura [Fri, 13 Mar 2009 20:52:00 +0000 (13:52 -0700)]
vmscan: pgmoved should be cleared after updating recent_rotated

pgmoved should be cleared after updating recent_rotated.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoeCryptfs: don't encrypt file key with filename key
Tyler Hicks [Fri, 13 Mar 2009 20:51:59 +0000 (13:51 -0700)]
eCryptfs: don't encrypt file key with filename key

eCryptfs has file encryption keys (FEK), file encryption key encryption
keys (FEKEK), and filename encryption keys (FNEK).  The per-file FEK is
encrypted with one or more FEKEKs and stored in the header of the
encrypted file.  I noticed that the FEK is also being encrypted by the
FNEK.  This is a problem if a user wants to use a different FNEK than
their FEKEK, as their file contents will still be accessible with the
FNEK.

This is a minimalistic patch which prevents the FNEKs signatures from
being copied to the inode signatures list.  Ultimately, it keeps the FEK
from being encrypted with a FNEK.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonommu: ramfs: don't leak pages when adding to page cache fails
Johannes Weiner [Fri, 13 Mar 2009 20:51:58 +0000 (13:51 -0700)]
nommu: ramfs: don't leak pages when adding to page cache fails

When a ramfs nommu mapping is expanded, contiguous pages are allocated
and added to the pagecache.  The caller's reference is then passed on
by moving whole pagevecs to the file lru list.

If the page cache adding fails, make sure that the error path also
moves the pagevec contents which might still contain up to PAGEVEC_SIZE
successfully added pages, of which we would leak references otherwise.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Enrik Berkhan <Enrik.Berkhan@ge.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonommu: ramfs: pages allocated to an inode's pagecache may get wrongly discarded
Enrik Berkhan [Fri, 13 Mar 2009 20:51:56 +0000 (13:51 -0700)]
nommu: ramfs: pages allocated to an inode's pagecache may get wrongly discarded

The pages attached to a ramfs inode's pagecache by truncation from nothing
- as done by SYSV SHM for example - may get discarded under memory
pressure.

The problem is that the pages are not marked dirty.  Anything that creates
data in an MMU-based ramfs will cause the pages holding that data will
cause the set_page_dirty() aop to be called.

For the NOMMU-based mmap, set_page_dirty() may be called by write(), but
it won't be called by page-writing faults on writable mmaps, and it isn't
called by ramfs_nommu_expand_for_mapping() when a file is being truncated
from nothing to allocate a contiguous run.

The solution is to mark the pages dirty at the point of allocation by the
truncation code.

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agokallsyms, tracing: output more proper symbol name
Lai Jiangshan [Fri, 13 Mar 2009 07:10:26 +0000 (15:10 +0800)]
kallsyms, tracing: output more proper symbol name

Impact: bugfix, output more reliable symbol lookup result

Debug tools(dump_stack(), ftrace...) are like to print out symbols.
But it is always print out the first aliased symbol.(Aliased symbols
are symbols with the same address), and the first aliased symbol is
sometime not proper.

 # echo function_graph > current_tracer
 # cat trace
......
 1)   1.923 us    |    select_nohz_load_balancer();
 1) + 76.692 us   |  }
 1)               |  default_idle() {
 1)   ==========> |    __irqentry_text_start() {
 1)   0.000 us    |      native_apic_mem_write();
 1)               |      irq_enter() {
 1)   0.000 us    |        idle_cpu();
 1)               |        tick_check_idle() {
 1)   0.000 us    |          tick_check_oneshot_broadcast();
 1)               |          tick_nohz_stop_idle() {
......

It's very embarrassing, it ouputs "__irqentry_text_start()",
actually, it should output "smp_apic_timer_interrupt()".
(these two symbol are the same address, but "__irqentry_text_start"
is deemed to the first aliased symbol by scripts/kallsyms)

This patch puts symbols like "__irqentry_text_start" to the second
aliased symbols. And a more proper symbol name becomes the first.

Aliased symbols mostly come from linker script. The solution is
guessing "is this symbol defined in linker script", the symbols
defined in linker script will not become the first aliased symbol.

And if symbols are found to be equal in this "linker script provided"
criteria, symbols are sorted by the number of prefix underscores.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Paulo Marques <pmarques@grupopie.com>
LKML-Reference: <49BA06E2.7080807@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'x86/asm' into tracing/syscalls
Ingo Molnar [Sat, 14 Mar 2009 07:16:21 +0000 (08:16 +0100)]
Merge branch 'x86/asm' into tracing/syscalls

We need the wider TIF work-mask checks in entry_32.S.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: entry_32.S fix compile warnings - fix work mask bit width
Jaswinder Singh Rajput [Sat, 14 Mar 2009 06:38:13 +0000 (12:08 +0530)]
x86: entry_32.S fix compile warnings - fix work mask bit width

Fix:

 arch/x86/kernel/entry_32.S:446: Warning: 00000000080001d1 shortened to 00000000000001d1
 arch/x86/kernel/entry_32.S:457: Warning: 000000000800feff shortened to 000000000000feff
 arch/x86/kernel/entry_32.S:527: Warning: 00000000080001d1 shortened to 00000000000001d1
 arch/x86/kernel/entry_32.S:541: Warning: 000000000800feff shortened to 000000000000feff
 arch/x86/kernel/entry_32.S:676: Warning: 0000000008000091 shortened to 0000000000000091

TIF_SYSCALL_FTRACE is 0x08000000 and until now we checked the
first 16 bits of the work mask - bit 27 falls outside of that.

Update the entry_32.S code to check the full 32-bit mask.

[ %cx => %ecx fix from Cyrill Gorcunov <gorcunov@gmail.com> ]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "H. Peter Anvin" <hpa@kernel.org>
LKML-Reference: <1237012693.18733.3.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMIPS: Mark Eins: Fix configuration.
Ralf Baechle [Fri, 13 Mar 2009 20:17:57 +0000 (21:17 +0100)]
MIPS: Mark Eins: Fix configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Fix TIF_32BIT undefined problem when seccomp is disabled
Zhang Le [Thu, 12 Mar 2009 10:00:50 +0000 (18:00 +0800)]
MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoide: save the returned value of dma_map_sg
FUJITA Tomonori [Fri, 13 Mar 2009 20:16:13 +0000 (21:16 +0100)]
ide: save the returned value of dma_map_sg

dma_map_sg could return a value different to 'nents' argument of
dma_map_sg so the ide stack needs to save it for the later usage
(e.g. for_each_sg).

The ide stack also needs to save the original sg_nents value for
pci_unmap_sg.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
[bart: backport to Linus' tree]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
13 years agoide-floppy: do not map dataless cmds to an sg
Borislav Petkov [Fri, 13 Mar 2009 20:16:12 +0000 (21:16 +0100)]
ide-floppy: do not map dataless cmds to an sg

since it fails the virt_to_page() translation check with DEBUG_VIRTUAL
enabled.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: backport to Linus' tree]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
13 years agoata_piix: add workaround for Samsung DB-P70
Tejun Heo [Tue, 3 Mar 2009 04:52:16 +0000 (13:52 +0900)]
ata_piix: add workaround for Samsung DB-P70

Samsung DB-P70 somehow botched the first ICH9 SATA port.  The board
doesn't expose the first port but somehow SStatus reports link online
while failing SRST protocol leading to repeated probe failures and
thus long boot delay.

Because the BIOS doesn't carry any identifying DMI information, the
port can't be blacklisted safely.  Fortunately, the controller does
have subsystem vendor and ID set.  It's unclear whether the subsystem
IDs are used only for the board but it can be safely worked around by
disabling SIDPR access and just using SRST works around the problem.
Even when the workaround is triggered on an unaffected board the only
side effect will be missing SCR access.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joseph Jang <josephjang@gmail.com>
Reported-by: Jonghyon Sohn <mrsohn@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
13 years agolibata: Keep shadow last_ctl up to date during resets
Stuart MENEFY [Tue, 10 Mar 2009 11:38:13 +0000 (11:38 +0000)]
libata: Keep shadow last_ctl up to date during resets

libata keeps a shadow copy of the ATA CTL register (which is write only),
and only writes to the hardware when the required value doesn't match
the shadow. However this copy wasn't being maintained when performing
reset functions. This could cause problems for the first operation after
a reset when the correct value might not be written to the CTL register.

This problem was observed when hotplugging a drive: the identify command
was being issued with interrupts enabled, when they should have been
disabled.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
13 years agosata_mv: fix MSI irq race condition
Mark Lord [Tue, 10 Mar 2009 20:28:51 +0000 (16:28 -0400)]
sata_mv: fix MSI irq race condition

Fix a (rare) race condition in mv_interrupt() when using MSI.

The value of hpriv->main_irq_mask_addr can change on on the fly,
and without this patch we could end up writing back a stale copy
to the hardware.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
13 years agoV4L/DVB (10978): Report tuning algorith correctly
Matthias Schwarzzot [Tue, 27 Jan 2009 19:29:44 +0000 (16:29 -0300)]
V4L/DVB (10978): Report tuning algorith correctly

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agoV4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument
Hans Werner [Tue, 27 Jan 2009 19:09:12 +0000 (16:09 -0300)]
V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument

in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I
don't know if this caused real problems anywhere

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agoV4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first...
Igor M. Liplianin [Sun, 9 Nov 2008 14:35:13 +0000 (11:35 -0300)]
V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod.

For legacy applications stv0899 performs search only first time after insmod
due to not set DVBFE_ALGO_SEARCH_AGAIN bit

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agoV4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative
Manu Abraham [Tue, 27 Jan 2009 14:03:16 +0000 (11:03 -0300)]
V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative

Code simplification: use in kernel macros

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agoV4L/DVB (10974): Use Diseqc 3/3 mode to send data
Sigmund Augdal [Mon, 26 Jan 2009 22:08:48 +0000 (19:08 -0300)]
V4L/DVB (10974): Use Diseqc 3/3 mode to send data

Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agotracing/syscalls: support for syscalls tracing on x86, fix
Ingo Molnar [Fri, 13 Mar 2009 16:02:17 +0000 (17:02 +0100)]
tracing/syscalls: support for syscalls tracing on x86, fix

Impact: build fix

 kernel/built-in.o: In function `ftrace_syscall_exit':
 (.text+0x76667): undefined reference to `syscall_nr_to_meta'

ftrace.o is built:

obj-$(CONFIG_DYNAMIC_FTRACE)    += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o

But now a CONFIG_FTRACE_SYSCALLS dependency is needed too.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: core infrastructure for syscalls tracing, enhancements
Frederic Weisbecker [Fri, 13 Mar 2009 14:42:11 +0000 (15:42 +0100)]
tracing/syscalls: core infrastructure for syscalls tracing, enhancements

Impact: new feature

This adds the generic support for syscalls tracing. This is
currently exploited through a devoted tracer but other tracing
engines can use it. (They just have to play with
{start,stop}_ftrace_syscalls() and use the display callbacks
unless they want to override them.)

The syscalls prototypes definitions are abused here to steal
some metadata informations:

- syscall name, param types, param names, number of params

The syscall addr is not directly saved during this definition
because we don't know if its prototype is available in the
namespace. But we don't really need it. The arch has just to
build a function able to resolve the syscall number to its
metadata struct.

The current tracer prints the syscall names, parameters names
and values (and their types optionally). Currently the value is
a raw hex but higher level values diplaying is on my TODO list.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236955332-10133-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/syscalls: support for syscalls tracing on x86
Frederic Weisbecker [Fri, 13 Mar 2009 14:42:12 +0000 (15:42 +0100)]
tracing/syscalls: support for syscalls tracing on x86

Extend x86 architecture syscall tracing support with syscall
metadata table details.

(The upcoming core syscall tracing modifications rely on this.)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236955332-10133-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoftrace: remove struct list_head from struct dyn_ftrace
Lai Jiangshan [Fri, 13 Mar 2009 09:51:27 +0000 (17:51 +0800)]
ftrace: remove struct list_head from struct dyn_ftrace

Impact: save memory

The struct dyn_ftrace table is very large, this patch will save
about 50%.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2C9F.8020009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoftrace: use seq_read
Lai Jiangshan [Fri, 13 Mar 2009 09:47:23 +0000 (17:47 +0800)]
ftrace: use seq_read

Impact: cleanup

VFS layer has tested the file mode, we do not need test it.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2BAB.6010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec
Zhaolei [Fri, 13 Mar 2009 09:16:34 +0000 (17:16 +0800)]
ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec

Do __ftrace_replace_code for !FTRACE_FL_CONVERTED rec will always
fail, we should ignore this rec.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA2472.4060206@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoftrace: avoid double-free of dyn_ftrace
Zhaolei [Fri, 13 Mar 2009 09:14:01 +0000 (17:14 +0800)]
ftrace: avoid double-free of dyn_ftrace

If dyn_ftrace is freed before ftrace_release(), ftrace_release()
will free it again and make ftrace_free_records wrong.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA23D9.1050900@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branches 'tracing/ftrace' and 'tracing/syscalls'; commit 'v2.6.29-rc8' into...
Ingo Molnar [Fri, 13 Mar 2009 09:23:39 +0000 (10:23 +0100)]
Merge branches 'tracing/ftrace' and 'tracing/syscalls'; commit 'v2.6.29-rc8' into tracing/core

13 years agoparisc: update defconfigs
Kyle McMartin [Fri, 13 Mar 2009 05:33:34 +0000 (01:33 -0400)]
parisc: update defconfigs

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 13 Mar 2009 05:30:52 +0000 (06:30 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

13 years agoMerge commit 'v2.6.29-rc8' into tracing/ftrace
Ingo Molnar [Fri, 13 Mar 2009 05:29:58 +0000 (06:29 +0100)]
Merge commit 'v2.6.29-rc8' into tracing/ftrace

13 years agotracing/x86: basic implementation of syscall tracing for x86
Frederic Weisbecker [Sat, 7 Mar 2009 04:53:00 +0000 (05:53 +0100)]
tracing/x86: basic implementation of syscall tracing for x86

Provide the x86 trace callbacks to trace syscalls.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agotracing/ftrace: syscall tracing infrastructure, basics
Frederic Weisbecker [Sat, 7 Mar 2009 04:52:59 +0000 (05:52 +0100)]
tracing/ftrace: syscall tracing infrastructure, basics

Provide basic callbacks to do syscall tracing.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-2-git-send-email-fweisbec@gmail.com>
[ simplified it to a trace_printk() for now. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoparisc: define x->x mmio accessors
Kyle McMartin [Tue, 17 Feb 2009 17:42:52 +0000 (12:42 -0500)]
parisc: define x->x mmio accessors

Bloody inconsiderate driver writers...

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()
Kay Sievers [Mon, 26 Jan 2009 03:53:16 +0000 (03:53 +0000)]
parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: convert cpu_check_affinity to new cpumask api
Kyle McMartin [Mon, 16 Feb 2009 08:20:54 +0000 (03:20 -0500)]
parisc: convert cpu_check_affinity to new cpumask api

cpumask arg to the affinity function is now const, sort
that out through the irq_desc implementations.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: convert (read|write)bwlq to inlines
Kyle McMartin [Mon, 16 Feb 2009 08:05:02 +0000 (03:05 -0500)]
parisc: convert (read|write)bwlq to inlines

Kills the 'value computed but not used' due to
leX_to_cpu.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix use of new cpumask api in irq.c
Kyle McMartin [Mon, 16 Feb 2009 07:53:03 +0000 (02:53 -0500)]
parisc: fix use of new cpumask api in irq.c

cpumask api needs to take a pointer to irq_desc[cpu].affinity

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: update parisc for new irq_desc
Mike Travis [Tue, 13 Jan 2009 03:05:25 +0000 (03:05 +0000)]
parisc: update parisc for new irq_desc

Impact: cleanup, update to new cpumask API

Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's
so access to them should be using the new cpumask API.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: update MAINTAINERS
Grant Grundler [Mon, 1 Dec 2008 07:21:35 +0000 (00:21 -0700)]
parisc: update MAINTAINERS

Signed-off-By: Grant Grundler <grundler@parisc-linux.org>
Reviewed-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix wrong assumption about bus->self
Grant Grundler [Thu, 29 Jan 2009 05:30:55 +0000 (22:30 -0700)]
parisc: fix wrong assumption about bus->self

Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> posted a patch series
to linux-pci to fix a wrong assumption about pci_bus->self==NULL for
all PCI host bus controllers. While PARISC platforms to not behave
this way, I prefer to have the code consistent across architectures.
The following patch replaces pci_bus->self with pci_bus->parent when
used as a test to check for "root bus controller".

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix 64bit build
Helge Deller [Mon, 26 Jan 2009 21:24:38 +0000 (22:24 +0100)]
parisc: fix 64bit build

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: add braces around arguments in assembler macros
Helge Deller [Sun, 18 Jan 2009 17:13:53 +0000 (18:13 +0100)]
parisc: add braces around arguments in assembler macros

Add braces around the macro arguments, else for example
"shl %r1, 5-3, %r2" would not expand to what you would assume.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix dev_printk() compile warnings for accessing a device struct
Helge Deller [Tue, 13 Jan 2009 20:14:51 +0000 (21:14 +0100)]
parisc: fix dev_printk() compile warnings for accessing a device struct

Fix compile warnings:
drivers/scsi/zalon.c: In function `zalon_probe':
drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_driver_string' from incompatible pointer type
drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_name' from incompatible pointer type

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: remove unused local out_putf label
Helge Deller [Tue, 13 Jan 2009 19:54:25 +0000 (20:54 +0100)]
parisc: remove unused local out_putf label

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix `struct pt_regs' declared inside parameter list warning
Helge Deller [Tue, 13 Jan 2009 19:52:46 +0000 (20:52 +0100)]
parisc: fix `struct pt_regs' declared inside parameter list warning

Fix those compile warnings:
uaccess.h:244: warning: `struct pt_regs' declared inside parameter list
uaccess.h:244: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: fix section mismatch warnings
Helge Deller [Tue, 13 Jan 2009 19:51:29 +0000 (20:51 +0100)]
parisc: fix section mismatch warnings

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: remove klist iterators
James Bottomley [Sat, 10 Jan 2009 00:57:06 +0000 (18:57 -0600)]
parisc: remove klist iterators

commit 11c3b5c3e08f4d855cbef52883c266b9ab9df879
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date:   Tue Dec 16 12:24:56 2008 -0800

    driver core: move klist_children into private structure

Broke our parisc build pretty badly because we touch the klists directly
in three cases (AGP, SBA and GSC).  Although GregKH will revert this
patch, there's no reason we should be using the iterators directly, we
can just move to the standard device_for_each_child() API.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agoparisc: BUG_ON() cleanup
Helge Deller [Tue, 6 Jan 2009 11:57:01 +0000 (12:57 +0100)]
parisc: BUG_ON() cleanup

- convert a few "if (xx) BUG();" to BUG_ON(xx)
- remove a few printk()s, as we get a backtrace with BUG_ON() anyway

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
13 years agosoftirq: no need to have SOFTIRQ in softirq name
Steven Rostedt [Fri, 13 Mar 2009 04:43:33 +0000 (00:43 -0400)]
softirq: no need to have SOFTIRQ in softirq name

Impact: clean up

It is redundant to have 'SOFTIRQ' in the softirq names.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: move binary buffers into per cpu directory
Steven Rostedt [Fri, 13 Mar 2009 04:37:42 +0000 (00:37 -0400)]
tracing: move binary buffers into per cpu directory

The binary_buffers directory in /debugfs/tracing held the files
to read the trace buffers in a binary format. This held one file
per CPU buffer. But we also have a per_cpu directory that holds
a way to read the pretty-print formats.

This patch moves the binary buffers into the per_cpu_directory:

 # ls /debug/tracing/per_cpu/cpu1/
trace  trace_pipe  trace_pipe_raw

The new name is called "trace_pipe_raw". The binary buffers always
acted similar to trace_pipe, except that they produce raw data.

Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agoV4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix
Antti Palosaari [Tue, 10 Mar 2009 16:06:40 +0000 (13:06 -0300)]
V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix

zl10353 i2c-gate was always closed and due to that devices having tuner
behind i2c-gate were broken. Add module configuration which allows disabling
i2c-gate only when really needed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agotracing: add comment for use of double __builtin_consant_p
Steven Rostedt [Fri, 13 Mar 2009 04:12:52 +0000 (00:12 -0400)]
tracing: add comment for use of double __builtin_consant_p

Impact: documentation

The use of the double __builtin_contant_p checks in the event_trace_printk
can be confusing to developers and reviewers. This patch adds a comment
to explain why it is there.

Requested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20090313122235.43EB.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: left align location header in stack_trace
Steven Rostedt [Fri, 13 Mar 2009 04:00:58 +0000 (00:00 -0400)]
tracing: left align location header in stack_trace

Ingo Molnar suggested, instead of:

        Depth    Size      Location    (27 entries)
        -----    ----      --------
  0)     2880      48   lock_timer_base+0x2b/0x4f
  1)     2832      80   __mod_timer+0x33/0xe0
  2)     2752      16   __ide_set_handler+0x63/0x65

To have it be:

        Depth    Size   Location    (27 entries)
        -----    ----   --------
  0)     2880      48   lock_timer_base+0x2b/0x4f
  1)     2832      80   __mod_timer+0x33/0xe0
  2)     2752      16   __ide_set_handler+0x63/0x65

Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 13 Mar 2009 03:34:09 +0000 (04:34 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

13 years agoMerge branches 'tracing/ftrace' and 'linus' into tracing/core
Ingo Molnar [Fri, 13 Mar 2009 03:33:17 +0000 (04:33 +0100)]
Merge branches 'tracing/ftrace' and 'linus' into tracing/core

13 years agoLinus 2.6.29-rc8
Linus Torvalds [Fri, 13 Mar 2009 02:39:28 +0000 (19:39 -0700)]
Linus 2.6.29-rc8

13 years agobitmap: fix end condition in bitmap_find_free_region
Linus Torvalds [Fri, 13 Mar 2009 02:32:51 +0000 (19:32 -0700)]
bitmap: fix end condition in bitmap_find_free_region

Guennadi Liakhovetski noticed that the end condition for the loop in
bitmap_find_free_region() is wrong, and the "return if error" was also
using the wrong conditional that would only trigger if the bitmap was an
exact multiple of the allocation size, which is not necessarily the case
with dma_alloc_from_coherent().

Such a failure would end up in bitmap_find_free_region() accessing
beyond the end of the bitmap.

Reported-by: Guennadi Liakhovetski <lg@denx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoring-buffer: document reader page design
Steven Rostedt [Fri, 13 Mar 2009 02:24:17 +0000 (22:24 -0400)]
ring-buffer: document reader page design

In a private email conversation I explained how the ring buffer
page worked by using silly ASCII art. Ingo suggested that I add
that to the comments of the code.

Here it is.

Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: show event name in trace for TRACE_EVENT created events
Steven Rostedt [Fri, 13 Mar 2009 02:00:19 +0000 (22:00 -0400)]
tracing: show event name in trace for TRACE_EVENT created events

Unlike TRACE_FORMAT() macros, the TRACE_EVENT() macros do not show
the event name in the trace file. Knowing the event type in the trace
output is very useful.

Instead of:

   task swapper:0 [140] ==> ntpd:3308 [120]

We now have:

   sched_switch: task swapper:0 [140] ==> ntpd:3308 [120]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: Don't use tracing_record_cmdline() in workqueue tracer fix
KOSAKI Motohiro [Fri, 13 Mar 2009 00:03:04 +0000 (09:03 +0900)]
tracing: Don't use tracing_record_cmdline() in workqueue tracer fix

commit c3ffc7a40b7e94b094efe1c8ab4e24370a782b65
"Don't use tracing_record_cmdline() in workqueue tracer"
has a race window.

find_task_by_vpid() requires task_list_lock().

LKML-Reference: <20090313090042.43CD.A69D9226@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: tracepoints for softirq entry/exit - tracepoints
Jason Baron [Thu, 12 Mar 2009 18:36:03 +0000 (14:36 -0400)]
tracing: tracepoints for softirq entry/exit - tracepoints

Introduce softirq entry/exit tracepoints. These are useful for
augmenting existing tracers, and to figure out softirq frequencies and
timings.

[
  s/irq_softirq_/softirq_/ for trace point names and
  Fixed printf format in TRACE_FORMAT macro
   - Steven Rostedt
]

LKML-Reference: <20090312183603.GC3352@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: tracepoints for softirq entry/exit - add softirq-to-name array
Jason Baron [Thu, 12 Mar 2009 18:33:36 +0000 (14:33 -0400)]
tracing: tracepoints for softirq entry/exit - add softirq-to-name array

Create a 'softirq_to_name' array, which is indexed by softirq #, so
that we can easily convert between the softirq index # and its name, in
order to get more meaningful output messages.

LKML-Reference: <20090312183336.GB3352@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: explain why stack tracer is empty
Steven Rostedt [Thu, 12 Mar 2009 23:42:29 +0000 (19:42 -0400)]
tracing: explain why stack tracer is empty

If the stack tracing is disabled (by default) the stack_trace file
will only contain the header:

 # cat /debug/tracing/stack_trace
        Depth    Size      Location    (0 entries)
        -----    ----      --------

This can be frustrating to a developer that does not realize that the
stack tracer is disabled. This patch adds the following text:

  # cat /debug/tracing/stack_trace
        Depth    Size      Location    (0 entries)
        -----    ----      --------
 #
 #  Stack tracer disabled
 #
 # To enable the stack tracer, either add 'stacktrace' to the
 # kernel command line
 # or 'echo 1 > /proc/sys/kernel/stack_tracer_enabled'
 #

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: fix stack tracer header
Steven Rostedt [Thu, 12 Mar 2009 22:57:51 +0000 (18:57 -0400)]
tracing: fix stack tracer header

The stack tracer use to look like this:

 # cat /debug/tracing/stack_trace
         Depth  Size      Location    (57 entries)
         -----  ----      --------
  0)     5088      16   mempool_alloc_slab+0x16/0x18
  1)     5072     144   mempool_alloc+0x4d/0xfe
  2)     4928      16   scsi_sg_alloc+0x48/0x4a [scsi_mod]

Now it looks like this:

 # cat /debug/tracing/stack_trace

        Depth    Size      Location    (57 entries)
        -----    ----      --------
  0)     5088      16   mempool_alloc_slab+0x16/0x18
  1)     5072     144   mempool_alloc+0x4d/0xfe
  2)     4928      16   scsi_sg_alloc+0x48/0x4a [scsi_mod]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: export trace formats to user space
Steven Rostedt [Thu, 12 Mar 2009 18:23:17 +0000 (14:23 -0400)]
tracing: export trace formats to user space

The binary printk saves a pointer to the format string in the ring buffer.
On output, the format is processed. But if the user is reading the
ring buffer through a binary interface, the pointer is meaningless.

This patch creates a file called printk_formats that maps the pointers
to the formats.

 # cat /debug/tracing/printk_formats
0xffffffff80713d40 : "irq_handler_entry: irq=%d handler=%s\n"
0xffffffff80713d48 : "lock_acquire: %s%s%s\n"
0xffffffff80713d50 : "lock_release: %s\n"

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: have event_trace_printk use static tracer
Steven Rostedt [Thu, 12 Mar 2009 18:19:25 +0000 (14:19 -0400)]
tracing: have event_trace_printk use static tracer

Impact: speed up on event tracing

The event_trace_printk is currently a wrapper function that calls
trace_vprintk. Because it uses a variable for the fmt it misses out
on the optimization of using the binary printk.

This patch makes event_trace_printk into a macro wrapper to use the
fmt as the same as the trace_printks.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: make bprint event use the proper event id
Steven Rostedt [Thu, 12 Mar 2009 18:14:31 +0000 (14:14 -0400)]
tracing: make bprint event use the proper event id

The bprint record is using TRACE_PRINT when it should be TRACE_BPRINT.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing/core: bring back raw trace_printk for dynamic formats strings
Frederic Weisbecker [Thu, 12 Mar 2009 17:24:49 +0000 (18:24 +0100)]
tracing/core: bring back raw trace_printk for dynamic formats strings

Impact: fix callsites with dynamic format strings

Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.

So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.

The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.

Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: show that buffer size is not expanded
Steven Rostedt [Thu, 12 Mar 2009 17:53:25 +0000 (13:53 -0400)]
tracing: show that buffer size is not expanded

Impact: do not confuse user on small trace buffer sizes

When the system boots up, the trace buffer is small to conserve memory.
It is only two pages per online CPU. When the tracer is used, it expands
to the default value.

This can confuse the user if they look at the buffer size and see only
7, but then later they see 1408.

 # cat /debug/tracing/buffer_size_kb
7

 # echo sched_switch > /debug/tracing/current_tracer

 # cat /debug/tracing/buffer_size_kb
1408

This patch tries to help remove this confustion by showing that the
buffer has not been expanded.

 # cat /debug/tracing/buffer_size_kb
7 (expanded: 1408)

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agoring-buffer: remove unneeded get_online_cpus
Steven Rostedt [Thu, 12 Mar 2009 17:13:49 +0000 (13:13 -0400)]
ring-buffer: remove unneeded get_online_cpus

Impact: speed up and remove possible races

The get_online_cpus was added to the ring buffer because the original
design would free the ring buffer on a CPU that was being taken
off line. The final design kept the ring buffer around even when the
CPU was taken off line. This is to allow a user to still read the
information on that ring buffer.

Most of the get_online_cpus are no longer needed since the ring buffer will
not disappear from the use cases.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agoring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG
Steven Rostedt [Thu, 12 Mar 2009 15:46:03 +0000 (11:46 -0400)]
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG

The hotplug code in the ring buffers is for use with CPU hotplug,
not generic hotplug.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
13 years agotracing: protect ring_buffer_expanded with trace_types_lock
Steven Rostedt [Thu, 12 Mar 2009 15:33:20 +0000 (11:33 -0400)]
tracing: protect ring_buffer_expanded with trace_types_lock

Impact: prevent races with ring_buffer_expanded

This patch places the expanding of the tracing buffer under the
protection of the trace_types_lock mutex. It is highly unlikely
that there would be any contention, but better safe than sorry.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>