linux-2.6.git
12 years agoMerge git://git.infradead.org/battery-2.6
Linus Torvalds [Thu, 4 Mar 2010 16:04:22 +0000 (08:04 -0800)]
Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: bq27x00: fix voltage and current units
  power_supply: bq27x00: add status and time properties
  power_supply: bq27x00: add BQ27500 support
  power_supply: bq27x00: fix temperature conversion
  power_supply: bq27x00: remove unused struct fields
  power_supply: bq27x00: remove double endian swap
  da9030_battery: fix spelling in comment
  wm97xx_battery: Clean up some warnings

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Thu, 4 Mar 2010 15:52:06 +0000 (07:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
  Regulators: wm8400 - cleanup platform driver data handling
  Regulators: wm8994 - clean up driver data after removal
  Regulators: wm831x-xxx - clean up driver data after removal
  Regulators: pcap-regulator - clean up driver data after removal
  Regulators: max8660 - annotate probe and remove methods
  Regulators: max1586 - annotate probe and remove methods
  Regulators: lp3971 - fail if platform data was not supplied
  Regulators: tps6507x-regulator - mark probe method as __devinit
  Regulators: tps65023-regulator - mark probe method as __devinit
  Regulators: twl-regulator - mark probe function as __devinit
  Regulators: fixed - annotate probe and remove methods
  Regulators: ab3100 - fix probe and remove annotations
  Regulators: virtual - use sysfs attribute groups
  twl6030: regulator: Configure STATE register instead of REMAP
  regulator: Provide optional dummy regulator for consumers
  regulator: Assume regulators are enabled if they don't report anything
  regulator: Convert fixed voltage regulator to use enable_time()
  regulator: Add WM8994 regulator support
  regulator: enable max8649 regulator driver
  regulator: trivial: fix typos in user-visible Kconfig text
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Thu, 4 Mar 2010 15:51:36 +0000 (07:51 -0800)]
Merge git://git./linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: disable pcmcia ioctl for !ARM, prepare for removal
  pcmcia: CodingStyle fixes
  pcmcia: alchemy: fixup wrong comments
  pcmcia: remove irq_list parameter from pd6729
  yenta_socket: ENE CB712 CardBus bridge needs special treatment with Echo Audio Indigo soundcards

12 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 4 Mar 2010 15:49:37 +0000 (07:49 -0800)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits)
  vga_switcheroo: disable default y by new rules.
  drm/nouveau: fix *staging* driver build with switcheroo off.
  drm/radeon: fix typo in Makefile
  vga_switcheroo: fix build on platforms with no ACPI
  drm/radeon: Fix printf type warning in 64bit system.
  drm/radeon/kms: bump the KMS version number for square tiling support.
  vga_switcheroo: initial implementation (v15)
  drm/radeon/kms: do not disable audio engine twice
  Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
  drm/radeon/kms: do not preset audio stuff and start timer when not using audio
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  ...

Fixed trivial conflicts in drivers/gpu/vga/Kconfig

12 years agoPrioritize synchronous signals over 'normal' signals
Linus Torvalds [Tue, 2 Mar 2010 16:36:46 +0000 (08:36 -0800)]
Prioritize synchronous signals over 'normal' signals

This makes sure that we pick the synchronous signals caused by a
processor fault over any pending regular asynchronous signals sent to
use by [t]kill().

This is not strictly required semantics, but it makes it _much_ easier
for programs like Wine that expect to find the fault information in the
signal stack.

Without this, if a non-synchronous signal gets picked first, the delayed
asynchronous signal will have its signal context pointing to the new
signal invocation, rather than the instruction that caused the SIGSEGV
or SIGBUS in the first place.

This is not all that pretty, and we're discussing making the synchronous
signals more explicit rather than have these kinds of implicit
preferences of SIGSEGV and friends.  See for example

http://bugzilla.kernel.org/show_bug.cgi?id=15395

for some of the discussion.  But in the meantime this is a simple and
fairly straightforward work-around, and the whole

if (x & Y)
x &= Y;

thing can be compiled into (and gcc does do it) just three instructions:

movq    %rdx, %rax
andl    $Y, %eax
cmovne  %rax, %rdx

so it is at least a simple solution to a subtle issue.

Reported-and-tested-by: Pavel Vilim <wylda@volny.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Wed, 3 Mar 2010 17:25:37 +0000 (09:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Simplify ECC override handling

12 years agoMerge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 3 Mar 2010 17:11:02 +0000 (09:11 -0800)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  resource: Fix broken indentation
  resource: Fix generic page_is_ram() for partial RAM pages
  x86, paravirt: Remove kmap_atomic_pte paravirt op.
  x86, vmi: Disable highmem PTE allocation even when CONFIG_HIGHPTE=y
  x86, xen: Disable highmem PTE allocation even when CONFIG_HIGHPTE=y

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Wed, 3 Mar 2010 16:53:49 +0000 (08:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: add reader's lock for cno in nilfs_ioctl_sync
  nilfs2: delete unnecessary condition in load_segment_summary
  nilfs2: move iterator to write log into segment buffer
  nilfs2: get rid of s_dirt flag use
  nilfs2: get rid of nilfs_segctor_req struct
  nilfs2: delete unnecessary condition in nilfs_dat_translate
  nilfs2: fix potential hang in nilfs_error on errors=remount-ro
  nilfs2: use mnt_want_write in ioctls where write access is needed
  nilfs2: issue discard request after cleaning segments

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Wed, 3 Mar 2010 16:53:17 +0000 (08:53 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (36 commits)
  Ocfs2: Move ocfs2 ioctl definitions from ocfs2_fs.h to newly added ocfs2_ioctl.h
  ocfs2: send SIGXFSZ if new filesize exceeds limit -v2
  ocfs2/userdlm: Add tracing in userdlm
  ocfs2: Use a separate masklog for AST and BASTs
  dlm: allow dlm do recovery during shutdown
  ocfs2: Only bug out in direct io write for reflinked extent.
  ocfs2: fix warning in ocfs2_file_aio_write()
  ocfs2_dlmfs: Enable the use of user cluster stacks.
  ocfs2_dlmfs: Use the stackglue.
  ocfs2_dlmfs: Don't honor truncate.  The size of a dlmfs file is LVB_LEN
  ocfs2: Pass the locking protocol into ocfs2_cluster_connect().
  ocfs2: Remove the ast pointers from ocfs2_stack_plugins
  ocfs2: Hang the locking proto on the cluster conn and use it in asts.
  ocfs2: Attach the connection to the lksb
  ocfs2: Pass lksbs back from stackglue ast/bast functions.
  ocfs2_dlmfs: Move to its own directory
  ocfs2_dlmfs: Use poll() to signify BASTs.
  ocfs2_dlmfs: Add capabilities parameter.
  ocfs2: Handle errors while setting external xattr values.
  ocfs2: Set inline xattr entries with ocfs2_xa_set()
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 3 Mar 2010 16:48:58 +0000 (08:48 -0800)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Wed, 3 Mar 2010 16:47:22 +0000 (08:47 -0800)]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits)
  jsm: fixing error if the driver fails to load
  jsm: removing the uart structure and filename on error
  tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call
  tty: Keep the default buffering to sub-page units
  tty: Fix up char drivers request_room usage
  tty: Fix the ldisc hangup race
  serial: timberdale: Remove dependancies
  nozomi: Tidy up the PCI table
  nozomi: Fix mutex handling
  nozomi: Add tty_port usage
  sdio_uart: Use kfifo instead of the messy circ stuff
  serial: bcm63xx_uart: allow more than one uart to be registered.
  serial: bcm63xx_uart: don't use kfree() on non kmalloced area.
  serial: bfin_5xx: pull in linux/io.h for ioremap prototypes
  serial: bfin_5xx: kgdboc should accept gdb break only when it is active
  serial: bfin_5xx: need to disable DMA TX interrupt too
  serial: bfin_5xx: remove useless gpio handling with hard flow control
  Char: synclink, remove unnecessary checks
  tty: declare MODULE_FIRMWARE in various drivers
  ip2: Add module parameter.
  ...

12 years agoMerge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 3 Mar 2010 16:15:37 +0000 (08:15 -0800)]
Merge branch 'x86-apic-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  x86: Fix out of order of gsi
  x86: apic: Fix mismerge, add arch_probe_nr_irqs() again
  x86, irq: Keep chip_data in create_irq_nr and destroy_irq
  xen: Remove unnecessary arch specific xen irq functions.
  smp: Use nr_cpus= to set nr_cpu_ids early
  x86, irq: Remove arch_probe_nr_irqs
  sparseirq: Use radix_tree instead of ptrs array
  sparseirq: Change irq_desc_ptrs to static
  init: Move radix_tree_init() early
  irq: Remove unnecessary bootmem code
  x86: Add iMac9,1 to pci_reboot_dmi_table
  x86: Convert i8259_lock to raw_spinlock
  x86: Convert nmi_lock to raw_spinlock
  x86: Convert ioapic_lock and vector_lock to raw_spinlock
  x86: Avoid race condition in pci_enable_msix()
  x86: Fix SCI on IOAPIC != 0
  x86, ia32_aout: do not kill argument mapping
  x86, irq: Move __setup_vector_irq() before the first irq enable in cpu online path
  x86, irq: Update the vector domain for legacy irqs handled by io-apic
  x86, irq: Don't block IRQ0_VECTOR..IRQ15_VECTOR's on all cpu's
  ...

12 years agoMerge branch 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 3 Mar 2010 16:15:05 +0000 (08:15 -0800)]
Merge branch 'x86-bootmem-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  early_res: Need to save the allocation name in drop_range_partial()
  sparsemem: Fix compilation on PowerPC
  early_res: Add free_early_partial()
  x86: Fix non-bootmem compilation on PowerPC
  core: Move early_res from arch/x86 to kernel/
  x86: Add find_fw_memmap_area
  Move round_up/down to kernel.h
  x86: Make 32bit support NO_BOOTMEM
  early_res: Enhance check_and_double_early_res
  x86: Move back find_e820_area to e820.c
  x86: Add find_early_area_size
  x86: Separate early_res related code from e820.c
  x86: Move bios page reserve early to head32/64.c
  sparsemem: Put mem map for one node together.
  sparsemem: Put usemap for one node together
  x86: Make 64 bit use early_res instead of bootmem before slab
  x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
  x86: Make early_node_mem get mem > 4 GB if possible
  x86: Dynamically increase early_res array size
  x86: Introduce max_early_res and early_res_count
  ...

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 3 Mar 2010 16:08:44 +0000 (08:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits)
  firewire: ohci: extend initialization log message
  firewire: ohci: fix IR/IT context mask mixup
  firewire: ohci: add module parameter to activate quirk fixes
  firewire: ohci: use an ID table for quirks detection
  firewire: ohci: reorder struct fw_ohci for better cache efficiency
  firewire: ohci: remove unused dualbuffer IR code
  firewire: core: combine a bit of repeated code
  firewire: core: change type of a data buffer
  firewire: cdev: increment ABI version number
  firewire: cdev: add more flexible cycle timer ioctl
  firewire: core: rename an internal function
  firewire: core: fix an information leak
  firewire: core: increase stack size of config ROM reader
  firewire: core: don't fail device creation in case of too large config ROM blocks
  firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500
  firewire: remove incomplete Bus_Time CSR support
  firewire: get_cycle_timer optimization and cleanup
  firewire: ohci: enable cycle timer fix on ALi and NEC controllers
  firewire: ohci: work around cycle timer bugs on VIA controllers
  firewire: make PCI device id constant
  ...

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Wed, 3 Mar 2010 16:08:21 +0000 (08:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix large stack use
  fuse: cleanup in fuse_notify_inval_...()

12 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Wed, 3 Mar 2010 15:41:24 +0000 (07:41 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (45 commits)
  compal-laptop: Make it depend on CONFIG_RFKILL
  classmate-laptop: Added some keys present in other devices
  MAINTAINERS: Add git tree to x86 Platform Drivers
  asus-acpi: remove duplicate comparison of asus_model strings
  toshiba-acpi: fix multimedia keys on some machines
  dell-laptop: Fix errors on failure and exit paths
  dell-laptop: Fix build error by making buffer_mutex static
  asus-laptop: fix style problems reported by checkpath.pl
  asus-laptop: use device_create_file() instead of platform_group
  asus-laptop: clean led code
  asus-laptop: add gps rfkill
  asus-laptop: set initial lcd state
  asus-laptop: leds, remove dead code and fix asus_led_exit()/asus_led_init()
  asus-laptop: add backlight changes notifications
  asus-laptop: add bluetooth keys found on M9V
  asus-laptop: switch to sparse keymap library
  asus-laptop: rename wireless_status to wlan_status to avoid confusion
  asus-laptop: add error check for write_acpi_int calls
  asus-laptop: stop using ASUS_HANDLE and use relative methods instead
  asus-laptop: rename function talking directly to acpi with asus_xxx scheme
  ...

12 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Wed, 3 Mar 2010 15:34:47 +0000 (07:34 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Document the message size limit
  i2c-algo-pca: Drop duplicate variable
  i2c: Hook up runtime PM support
  i2c-parport-light: Add SMBus alert support
  i2c-parport: Add SMBus alert support
  i2c: Separate Kconfig option for i2c-smbus
  i2c: Add SMBus alert support
  i2c-parport: Give powered devices some time to settle
  i2c-tiny-usb: Fix a comment on bus frequency
  i2c-i801: Add Intel Cougar Point device IDs
  i2c: Make PCI device ids constant

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Wed, 3 Mar 2010 15:34:18 +0000 (07:34 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: add __percpu sparse annotations to what's left
  percpu: add __percpu sparse annotations to fs
  percpu: add __percpu sparse annotations to core kernel subsystems
  local_t: Remove leftover local.h
  this_cpu: Remove pageset_notifier
  this_cpu: Page allocator conversion
  percpu, x86: Generic inc / dec percpu instructions
  local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c
  module: Use this_cpu_xx to dynamically allocate counters
  local_t: Remove cpu_local_xx macros
  percpu: refactor the code in pcpu_[de]populate_chunk()
  percpu: remove compile warnings caused by __verify_pcpu_ptr()
  percpu: make accessors check for percpu pointer in sparse
  percpu: add __percpu for sparse.
  percpu: make access macros universal
  percpu: remove per_cpu__ prefix.

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Wed, 3 Mar 2010 15:33:50 +0000 (07:33 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: print glock numbers in hex
  GFS2: ordered writes are backwards
  GFS2: Remove old, unused linked list code from quota
  GFS2: Remove loopy umount code
  GFS2: Metadata address space clean up

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 3 Mar 2010 15:33:17 +0000 (07:33 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits)
  IB/srp: Clean up error path in srp_create_target_ib()
  IB/srp: Split send and recieve CQs to reduce number of interrupts
  RDMA/nes: Add support for KR device id 0x0110
  IB/uverbs: Use anon_inodes instead of private infinibandeventfs
  IB/core: Fix and clean up ib_ud_header_init()
  RDMA/cxgb3: Mark RDMA device with CXIO_ERROR_FATAL when removing
  RDMA/cxgb3: Don't allocate the SW queue for user mode CQs
  RDMA/cxgb3: Increase the max CQ depth
  RDMA/cxgb3: Doorbell overflow avoidance and recovery
  IB/core: Pack struct ib_device a little tighter
  IB/ucm: Clean whitespace errors
  IB/ucm: Increase maximum devices supported
  IB/ucm: Use stack variable 'base' in ib_ucm_add_one
  IB/ucm: Use stack variable 'devnum' in ib_ucm_add_one
  IB/umad: Clean whitespace
  IB/umad: Increase maximum devices supported
  IB/umad: Use stack variable 'base' in ib_umad_init_port
  IB/umad: Use stack variable 'devnum' in ib_umad_init_port
  IB/umad: Remove port_table[]
  IB/umad: Convert *cdev to cdev in struct ib_umad_port
  ...

12 years agodocbook: fix errors from x86 headers merger
Randy Dunlap [Tue, 2 Mar 2010 06:06:25 +0000 (22:06 -0800)]
docbook: fix errors from x86 headers merger

Fix docbook errors for x86 headers that were recently merged:

docproc: arch/x86/include/asm/atomic_32.h: No such file or directory
docproc: arch/x86/include/asm/io_32.h: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Wed, 3 Mar 2010 15:32:10 +0000 (07:32 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] pSesInfo->sesSem is used as mutex. Rename it to session_mutex and
  [CIFS] Use unsigned ea length for clarity
  cifs: set server_eof in cifs_fattr_to_inode
  [CIFS] Minor cleanup to EA patch
  cifs: merge CIFSSMBQueryEA with CIFSSMBQAllEAs
  cifs: verify lengths of QueryAllEAs reply
  cifs: increase maximum buffer size in CIFSSMBQAllEAs
  cifs: rename name_len to list_len in CIFSSMBQAllEAs
  cifs: clean up indentation in CIFSSMBQAllEAs
  cifs: add parens around smb_var in BCC macros

12 years agoRegulators: wm8400 - cleanup platform driver data handling
Dmitry Torokhov [Thu, 25 Feb 2010 09:55:37 +0000 (01:55 -0800)]
Regulators: wm8400 - cleanup platform driver data handling

On Wed, Feb 24, 2010 at 08:40:56PM +0000, Mark Brown wrote:
> On Wed, Feb 24, 2010 at 11:21:26AM -0800, Dmitry Torokhov wrote:
> > On Wed, Feb 24, 2010 at 07:14:03PM +0000, Mark Brown wrote:
>
> > > This doesn't help unless you also provide a way for users to obtain a
> > > struct wm8400.
>
> > Why would they need it? Only code that creates instances of wm8400 needs
> > to know the definition of the sturcture, the rest can simply pass the
> > pointer around.
>
> > I guess there is disconnect between us and I do not see any users of
> > wm8400_register_regulator() in linux-next... Is there another tree I
> > could peek at?
>
> There are no users in mainline.  This would be called by board specific
> code from the init callback of the wm8400 - you'd need to pass that
> callback the struct wm8400.
>
> In any case, this is clearly an unrelated change to whatever else you
> were doing to the driver so should be split off into a separate patch,
> but if this is being changed at all then it'd be much more sensible to
> change it to use a more modern pattern which completely removes the
> wm8400_register_regulator() function and just uses platform data.

Fair enough, I removed the offending part, updated patch below.

--
Dmitry

regulator: wm8400 - cleanup platform driver data handling

Driver data set by platform_set_drvdata() is for private use of
the driver currently bound to teh device and not for use by parent,
subsystem and anyone else.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: wm8994 - clean up driver data after removal
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:44 +0000 (23:38 -0800)]
Regulators: wm8994 - clean up driver data after removal

It is a good tone to reset driver data after unbinding the device.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: wm831x-xxx - clean up driver data after removal
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:39 +0000 (23:38 -0800)]
Regulators: wm831x-xxx - clean up driver data after removal

It is a good tone to reset driver data after unbinding the device.
Also set up drivers owner.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: pcap-regulator - clean up driver data after removal
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:33 +0000 (23:38 -0800)]
Regulators: pcap-regulator - clean up driver data after removal

It is a good tone to reset driver data after unbinding the device.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: max8660 - annotate probe and remove methods
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:28 +0000 (23:38 -0800)]
Regulators: max8660 - annotate probe and remove methods

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: max1586 - annotate probe and remove methods
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:23 +0000 (23:38 -0800)]
Regulators: max1586 - annotate probe and remove methods

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: lp3971 - fail if platform data was not supplied
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:17 +0000 (23:38 -0800)]
Regulators: lp3971 - fail if platform data was not supplied

There is no point in completing probe if platform data is missing so
let's abort loading early.

Also, use kcalloc when allocating several instances of the same data
structure and mark setup_regulators() as __devinit since it is only
called from lp3971_i2c_probe() which is __devinit.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: tps6507x-regulator - mark probe method as __devinit
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:12 +0000 (23:38 -0800)]
Regulators: tps6507x-regulator - mark probe method as __devinit

Also move error handling in probe() out of line and do not bother
to reset fields in structures that are about to be freed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: tps65023-regulator - mark probe method as __devinit
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:06 +0000 (23:38 -0800)]
Regulators: tps65023-regulator - mark probe method as __devinit

Also move error handling in probe() out of line and do not bother
to reset fields in structures that are about to be freed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: twl-regulator - mark probe function as __devinit
Dmitry Torokhov [Wed, 24 Feb 2010 07:38:01 +0000 (23:38 -0800)]
Regulators: twl-regulator - mark probe function as __devinit

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: fixed - annotate probe and remove methods
Dmitry Torokhov [Wed, 24 Feb 2010 07:37:55 +0000 (23:37 -0800)]
Regulators: fixed - annotate probe and remove methods

Add __devinit/__devexit markings to probe and remove methids of the
driver, change types of variables containing boolean data to boolean,
set up driver's owner field so we have proper sysfs link between
driver and the module.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: ab3100 - fix probe and remove annotations
Dmitry Torokhov [Wed, 24 Feb 2010 07:37:50 +0000 (23:37 -0800)]
Regulators: ab3100 - fix probe and remove annotations

Probe and remove methods should not be marked as __init/__exit but
rather __devinit/__devexit so that the needed sections stay in memory
in presence of CONFIG_HOTPLUG. This is needed even on non hotpluggable
buses.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoRegulators: virtual - use sysfs attribute groups
Dmitry Torokhov [Wed, 24 Feb 2010 07:37:44 +0000 (23:37 -0800)]
Regulators: virtual - use sysfs attribute groups

Instead of open-coding sysfs attribute group use canned solution.
Also add __devinit/__devexit markups for probe and remove methods
and use 'bool' where it makes sense.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agotwl6030: regulator: Configure STATE register instead of REMAP
Rajendra Nayak [Wed, 17 Feb 2010 15:24:15 +0000 (20:54 +0530)]
twl6030: regulator: Configure STATE register instead of REMAP

This is no REMAP register on twl6030, instead there is a STATE register
to drive a resource to a given state.
The state register can be used to specify what state the resource should
enter when its associated with a GRP.
Register Bit field description is as below. The patch programmes the
corresponding STATE registers for all LDO's to turn ON when assocaited
with GRP_P1.

STATE REG:
Bit7   |Bit6   |Bit5   |Bit4  |Bit3  |Bit2  |Bit1   |Bit0
P3_GRP |P2_GRP |P1_GRP |RES   |RES   |RES   |State1 |State0

State can be specified as below
00: OFF
01: ON
10: OFF
11: SLEEP

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Provide optional dummy regulator for consumers
Mark Brown [Fri, 12 Feb 2010 10:18:08 +0000 (10:18 +0000)]
regulator: Provide optional dummy regulator for consumers

In order to ease transitions with drivers are boards start using regulators
provide an option to cause all regulator_get() calls to succeed, with a
dummy always on regulator being supplied where one has not been configured.
A warning is printed whenever the dummy regulator is used to aid system
development.

This regulator does not implement any regulator operations but will allow
simple consumers which only do enable() and disable() calls to run. It
is kept separate from the fixed voltage regulator to avoid Kconfig
confusion on the part of users when it is extended to allow boards to
explicitly use the dummy regulator to simplify cases where the majority
of supplies are from fixed regulators without software control.

This option is currently only effective for systems which do not specify
full constriants. If required an override could also be provided to allow
these systems to use the dummy regulator, though it is likely that
unconfigured supplies on such systems will lead to error due to
regulators being powered down more aggressively when not in use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Assume regulators are enabled if they don't report anything
Mark Brown [Thu, 11 Feb 2010 17:22:45 +0000 (17:22 +0000)]
regulator: Assume regulators are enabled if they don't report anything

If a regulator driver does not provide a way to query if the driver is
enabled then assume that it is enabled.  This is very likely to reflect
the actual state is more useful for callers than reporting an error.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Convert fixed voltage regulator to use enable_time()
Mark Brown [Thu, 28 Jan 2010 10:21:05 +0000 (10:21 +0000)]
regulator: Convert fixed voltage regulator to use enable_time()

It had an open coded version in enable().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Add WM8994 regulator support
Mark Brown [Mon, 25 Jan 2010 19:41:57 +0000 (19:41 +0000)]
regulator: Add WM8994 regulator support

The WM8994 contains two LDOs with mixed hardware/software control to
minimise the number of external supplies required while delivering
optimal voltages to minimise power consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: enable max8649 regulator driver
Haojian Zhuang [Mon, 25 Jan 2010 15:24:09 +0000 (10:24 -0500)]
regulator: enable max8649 regulator driver

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: trivial: fix typos in user-visible Kconfig text
Alex Chiang [Tue, 26 Jan 2010 04:14:37 +0000 (21:14 -0700)]
regulator: trivial: fix typos in user-visible Kconfig text

Fix Kconfig text for some Wolfson Micro devices.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: mc13783: consider Power Gates as digital regulators.
Alberto Panizzo [Tue, 19 Jan 2010 11:48:54 +0000 (12:48 +0100)]
regulator: mc13783: consider Power Gates as digital regulators.

GPO regulators are digital outputs that can be enabled or disabled by a
dedicated bit in mc13783 POWERMISC register.
In this family can be count in also Power Gates (PWGT1 and 2): enabled by
a dedicated pin a Power Gate is an hardware driven supply where the output
(PWGTnDRV) follow this law:

 Bit PWGTxSPIEN | Pin PWGTxEN | PWGTxDRV |  Read Back
   0 = default  |             |          | PWGTxSPIEN
 ---------------+-------------+----------+------------
       1        |      x      |   Low    |     0
       0        |      0      |   High   |     1
       0        |      1      |   Low    |     0

As read back value of control bit reflects the PWGTxDRV state (not the
control value previously written) and mc13783 POWERMISC register contain
only regulator related bits, a dedicated function to manage these bits is
created here with the aim of tracing the real value of PWGTxSPIEN bits
and reproduce it on next writes.

All POWERMISC users _must_ use the new function to not accidentally
disable Power Gates supplies.

v2 changes:
-Better utilization of abstraction layers.
-Voltage query support. GPO's and PWGTxDRV are fixed voltage regulator
 with voltage value of 3.1V and 5.5V respectively.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Add 'start-up time' to fixed voltage regulators
Adrian Hunter [Tue, 12 Jan 2010 10:25:13 +0000 (12:25 +0200)]
regulator: Add 'start-up time' to fixed voltage regulators

Add a field to specify a delay for the start-up time of
a fixed voltage regulator.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: Implement enable_time() for WM835x ISINKs
Mark Brown [Mon, 4 Jan 2010 17:24:01 +0000 (17:24 +0000)]
regulator: Implement enable_time() for WM835x ISINKs

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoregulator: Allow regulators to specify the time taken to ramp on enable
Mark Brown [Mon, 21 Dec 2009 12:21:52 +0000 (12:21 +0000)]
regulator: Allow regulators to specify the time taken to ramp on enable

Regulators may sometimes take longer to enable than the control operation
used to do so, either because the regulator has ramp rate control used to
limit inrush current or because the control operation is very fast (GPIO
being the most common example of this).  In order to ensure that consumers
do not rely on the regulator before it is enabled provide an enable_time()
operation and have the core delay for that time before returning to the
caller.

This is implemented as a function since the ramp rate may be specified in
voltage per unit time and therefore the time depend on the configuration.
In future it would be desirable to allow the bulk operations to run the
delays for multiple enables in parallel but this is not currently supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoregulator: Add notifier event on regulator disable
Mark Brown [Tue, 1 Dec 2009 21:12:27 +0000 (21:12 +0000)]
regulator: Add notifier event on regulator disable

The intended use case is for drivers which disable regulators to save
power but need to do some work to restore the hardware state when
restarting.  If the supplies are not actually disabled due to board
limits or sharing with other active devices this notifier allows the
driver to avoid unneeded reinitialisation, particularly when used with
runtime PM.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoregulator/lp3971: Storage class should be before const qualifier
Tobias Klauser [Wed, 23 Dec 2009 13:13:17 +0000 (14:13 +0100)]
regulator/lp3971: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agoregulator: add voltage selection capability to mc13783 regulators v2 .
Alberto Panizzo [Mon, 14 Dec 2009 17:26:38 +0000 (18:26 +0100)]
regulator: add voltage selection capability to mc13783 regulators v2 .

This patch, complete the mc13783 regulator subsystem driver with
voltage selecting capability.
Main Switches (SW1AB, SW2AB) are not supported yet.

version 2 diffs:
- delete the "Switchers PLL" enable and multiplication factor value
  selecting capability because it is not a voltage or current regulator.
  This will be a part of Main switcher supporting task.
- Correct many coding style problems pointed me out.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
12 years agopcmcia: disable pcmcia ioctl for !ARM, prepare for removal
Dominik Brodowski [Fri, 15 Jan 2010 22:55:21 +0000 (23:55 +0100)]
pcmcia: disable pcmcia ioctl for !ARM, prepare for removal

The PCMCIA ioctl -- deprecated for years -- suffers from insufficient
locking. As it already has been deprecated for years, with its removal
long overdue, limit it to !SMP and !PREEMPT.

Furthermore, the last legitimate use of the ioctl to be reported
relates to the ARM architecture in 2008.[1] Attempts to resolve
this issue turned out unsuccessful so far.[2] Other usages have only
been reported as hear-say. If there are any legitiate and necessary
use-cases remaining, please speak out before the end of the grace
period until 2.6.3{5,6}(-rc1).

[1] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005440.html
    see also: http://lkml.org/lkml/2008/2/27/291
[2] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005450.html
    http://lists.infradead.org/pipermail/linux-pcmcia/2010-January/006740.html
    see also: http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005453.html

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: Robert P. J. Day <rpjday@crashcourse.ca>
CC: Jaswinder Singh Rajput <jaswinder@kernel.org>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
12 years agopcmcia: CodingStyle fixes
Dominik Brodowski [Tue, 2 Mar 2010 07:57:33 +0000 (08:57 +0100)]
pcmcia: CodingStyle fixes

Fix most of the remaining CodingStyle issues in drivers/pcmcia , which
related to wrong indent -- PCMCIA historically used 4 spaces. Also, remove
a custom min() implementation with the generic one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
12 years agovga_switcheroo: disable default y by new rules.
Dave Airlie [Tue, 2 Mar 2010 23:26:35 +0000 (09:26 +1000)]
vga_switcheroo: disable default y by new rules.

Another undocumented rule of kernel folklore, no default y
config options anymore, apparantly hinting to distros they might
want something isn't preferred anymore.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/nouveau: fix *staging* driver build with switcheroo off.
Dave Airlie [Tue, 2 Mar 2010 23:20:25 +0000 (09:20 +1000)]
drm/nouveau: fix *staging* driver build with switcheroo off.

This driver is in *staging*. Fix the build with the switcheroo off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoUSB: backlight, appledisplay: fix incomplete registration failure handling
Bruno Prémont [Fri, 26 Feb 2010 12:02:04 +0000 (13:02 +0100)]
USB: backlight, appledisplay: fix incomplete registration failure handling

On error while registering backlight, return it to caller instead of
returning 0.
Mark struct backlight_ops as const.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: pl2303: remove unnecessary reset of usb_device in urbs
Johan Hovold [Thu, 25 Feb 2010 19:52:30 +0000 (20:52 +0100)]
USB: pl2303: remove unnecessary reset of usb_device in urbs

URBs are initialised at probe and do not change.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ftdi_sio: remove obsolete check in unthrottle
Johan Hovold [Thu, 25 Feb 2010 19:19:10 +0000 (20:19 +0100)]
USB: ftdi_sio: remove obsolete check in unthrottle

No need to check ASYNCB_INITIALIZED anymore as commit
e1108a63e10d344284011cccc06328b2cd3e5da3 (usb_serial: Use the shutdown()
operation) make sure that there is no longer any call to unthrottle
after device specific close (in which the read urb is killed).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ftdi_sio: remove unused tx_bytes counter
Johan Hovold [Thu, 25 Feb 2010 19:18:13 +0000 (20:18 +0100)]
USB: ftdi_sio: remove unused tx_bytes counter

Remove counter that is never exported.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: qcaux: driver for auxiliary serial ports on Qualcomm devices
Dan Williams [Thu, 25 Feb 2010 18:39:20 +0000 (10:39 -0800)]
USB: qcaux: driver for auxiliary serial ports on Qualcomm devices

qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal AT commands and PPP connections.  But they only provide one
which makes status or signal strength requests impossible while
PPP is active.  They also provide secondary USB interfaces that
talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be
used for status and strength.  Make those QCDM ports accessible.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: pl2303: initial TIOCGSERIAL support
John Tsiombikas [Thu, 25 Feb 2010 15:09:08 +0000 (17:09 +0200)]
USB: pl2303: initial TIOCGSERIAL support

I've got a trivial patch for the pl2303 driver, that's what I needed to
make the wacom serial tablet driver work properly. It uses the
TIOCGSERIAL ioctl to determine if it's talking to a serial device or
not, which I gather is rather common, but the pl2303 driver didn't
implement that ioctl.

Here's a patch, I'm not sure it's absolutely correct, I mostly looked at
other similar usbserial drivers to see what I must do, but it works for
me.

Signed-off-by: John Tsiombikas <nuclear@member.fsf.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: option: add Longcheer/Longsung vendor ID
Dan Williams [Wed, 17 Feb 2010 02:43:29 +0000 (18:43 -0800)]
USB: option: add Longcheer/Longsung vendor ID

Longcheer is a Chinese company that manufactures the devices which a
bunch of different companies like Alcatel, 4G Systems, and Mobidata
rebrand.  While I can't find Longcheer's USB ID registered anywhere,
it's pretty clear the ID is theirs.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: fix I2C API usage in ohci-pnx4008.
Luotao Fu [Fri, 19 Feb 2010 14:42:00 +0000 (15:42 +0100)]
USB: fix I2C API usage in ohci-pnx4008.

i2c_board_info doesn't contain a member called name. i2c_register_client
call does not exist.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: usbmon: mask seconds properly in text API
Pete Zaitcev [Sat, 20 Feb 2010 06:55:57 +0000 (23:55 -0700)]
USB: usbmon: mask seconds properly in text API

The code does not implement the comment, so timestamps for long traces
become confusing instead of wrapping neatly as expected. This was actually
observed. Fortunately for API being in debugfs, we can just fix this instead
of staying bug-for-bug compatible. Double fortunately, the stable binary
API is not affected.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: sisusbvga: no unnecessary GFP_ATOMIC
Oliver Neukum [Sat, 20 Feb 2010 00:40:54 +0000 (01:40 +0100)]
USB: sisusbvga: no unnecessary GFP_ATOMIC

If a driver can wait on an event, it can also use GFP_KERNEL.

Signed-off-by: Oliver Neukum <neukum@b1-systems.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: storage: onetouch: unnecessary GFP_ATOMIC
Oliver Neukum [Sat, 20 Feb 2010 01:03:19 +0000 (02:03 +0100)]
USB: storage: onetouch: unnecessary GFP_ATOMIC

No need to use GFP_ATOMIC to allocate buffers.

Signed-off-by: Oliver Neukum <neukum@b1-systems.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: serial: ftdi: add CONTEC vendor and product id
Daniel Sangorrin [Mon, 22 Feb 2010 02:03:11 +0000 (11:03 +0900)]
USB: serial: ftdi: add CONTEC vendor and product id

This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds
identifiers for CONTEC USB serial converter. I tested it
with the device COM-1(USB)H

Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: remove references to port->port.count from the serial drivers
Alan Stern [Wed, 17 Feb 2010 15:05:47 +0000 (10:05 -0500)]
USB: remove references to port->port.count from the serial drivers

This patch (as1344) removes references to port->port.count from the
USB serial drivers.  Now that serial ports are properly reference
counted, port.count checking is unnecessary and incorrect.  Drivers
should assume that the port is in use from the time the open method
runs until the close method is called.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: tty: Prune uses of tty_request_room in the USB layer
Alan Cox [Thu, 18 Feb 2010 16:44:01 +0000 (16:44 +0000)]
USB: tty: Prune uses of tty_request_room in the USB layer

We have lots of callers that do not need to do this in the first place.
Remove the calls as they both cost CPU and for big buffers can mess up the
multi-page allocation avoidance.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: tty: Add a function to insert a string of characters with the same flag
Alan Cox [Thu, 18 Feb 2010 16:43:54 +0000 (16:43 +0000)]
USB: tty: Add a function to insert a string of characters with the same flag

The USB drivers often want to insert a series of bytes all with the same
flag set - provide a helper for this case.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_conf...
Roel Kluin [Thu, 18 Feb 2010 01:36:23 +0000 (02:36 +0100)]
USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()

While looping over the interfaces, if usb_hcd_alloc_bandwidth() fails it calls
hcd->driver->reset_bandwidth(), so there was no need to reinstate the interface
again.

If no break occurred, the index equals config->desc.bNumInterfaces. A
subsequent usb_control_msg() failure resulted in a read from
config->interface[config->desc.bNumInterfaces] at label reset_old_alts.

In either case the last interface should be skipped.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: tty: kill request_room for USB ACM class
Alan Cox [Wed, 17 Feb 2010 13:07:05 +0000 (13:07 +0000)]
USB: tty: kill request_room for USB ACM class

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: tty: sort out the request_room handling for whiteheat
Alan Cox [Wed, 17 Feb 2010 13:06:57 +0000 (13:06 +0000)]
USB: tty: sort out the request_room handling for whiteheat

This driver has its own (surplus) backup queue system which wants removing
from the receive overflow logic.

Do this at the same time as removing the request_room logic

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: storage: fix misplaced parenthesis
Roel Kluin [Wed, 17 Feb 2010 10:50:26 +0000 (11:50 +0100)]
USB: storage: fix misplaced parenthesis

Due to a misplaced parenthesis the usbat_write_block() return value was not
stored, but a boolean. USB_STOR_TRANSPORT_NO_SENSE and USB_STOR_TRANSPORT_ERROR
were returned as USB_STOR_TRANSPORT_FAILED.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices...
Dennis O'Brien [Mon, 15 Feb 2010 16:50:38 +0000 (08:50 -0800)]
USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers

This patch removes the vstusb driver and support from the Linux tree.
This driver provided support for Vernier Software & Technology devices
and spectrometers (Ocean Optics). This driver is being replaced by a
user space - libusb - implementation.

Signed-off-by: Jim Collar <jim.collar@eqware.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: fix the idProduct value for USB-3.0 root hubs
Alan Stern [Thu, 25 Feb 2010 18:19:37 +0000 (13:19 -0500)]
USB: fix the idProduct value for USB-3.0 root hubs

This patch (as1346) changes the idProduct value for USB-3.0 root hubs
from 0x0002 (which we already use for USB-2.0 root hubs) to 0x0003.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agousb-storage: use max_hw_sectors instead of max_sectors
Alan Stern [Fri, 26 Feb 2010 16:49:39 +0000 (11:49 -0500)]
usb-storage: use max_hw_sectors instead of max_sectors

This patch (as1347) makes some adjustments to the way usb-storage
handles the request-queue parameters.

USB host controllers are able to handle arbitrarily long
scatter-gather lists, since they are limited only by main memory and
not by the controller hardware.  Hence the sg_tablesize field in the
host template can be increased to the maximum value.

Drivers like usb-storage aren't supposed to touch the queue's
max_sectors parameter; instead they are supposed to use the
max_hw_sectors value.  Accordingly, the patch replaces calls of
queue_max_sectors() with calls of queue_max_hw_sectors().  Oddly
enough, the blk_queue_max_sectors() routine is nevertheless still
appropriate.

The existing code imposes a limit of SCSI_DEFAULT_MAX_SECTORS (1024)
on the values accepted by the max_sectors attribute file.  There's no
reason not to accept larger values, so the limit is removed.  (It
would be nice to change the file's name to max_hw_sectors, but the old
name is already a well-established API.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: OHCI: DA8xx/OMAP-L1x glue layer
Sergei Shtylyov [Fri, 12 Feb 2010 19:52:34 +0000 (23:52 +0400)]
USB: OHCI: DA8xx/OMAP-L1x glue layer

Texas Instruments DA8xx/OMAP-L1x OHCI glue layer.

This OHCI implementation is not without quirks: there's only one physical port
despite the root hub reporting two; the port's power control and over-current
status bits are not connected to any pins, however, at least on the DA830 EVM
board, those signals are connected via GPIO, thus the provision was made for
overriding the OHCI port power and over-current bits at the board level...

Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ehci: omap: Update TODO list in comments
Anand Gadiyar [Fri, 12 Feb 2010 12:19:00 +0000 (17:49 +0530)]
USB: ehci: omap: Update TODO list in comments

DPLL5 programming was moved out of this file before submission.
Update the TODO list in the comments to reflect this

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ehci: omap: use default interrupt threshold
Anand Gadiyar [Fri, 12 Feb 2010 12:18:59 +0000 (17:48 +0530)]
USB: ehci: omap: use default interrupt threshold

The current driver reduces the interrupt threshold to 1 microframe.
This was an accidental change and is not really required.
The default of 8 microframes will do just fine. So change it back.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: omap: ehci: kill 2 compile warnings
Anand Gadiyar [Fri, 12 Feb 2010 12:24:59 +0000 (17:54 +0530)]
USB: omap: ehci: kill 2 compile warnings

Kill these compile warnings:
CC [M]  drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-dbg.c:45: warning: 'dbg_hcs_params' defined but not used
drivers/usb/host/ehci-dbg.c:89: warning: 'dbg_hcc_params' defined but not used

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: serial: sierra driver indat_callback fix
Elina Pasheva [Mon, 15 Feb 2010 22:50:14 +0000 (14:50 -0800)]
USB: serial: sierra driver indat_callback fix

A crash has been reported with sierra driver on disconnect with
Ubuntu/Lucid distribution based on kernel-2.6.32.
The cause of the crash was determined as "NULL tty pointer was being
referenced" and the NULL pointer was passed by sierra_indat_callback().

This patch modifies sierra_indat_callback() function to check for NULL
tty structure pointer. This modification prevents a crash from happening
when the device is disconnected.

This patch fixes the bug reported in Launchpad:
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/511157

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: serial: sierra driver adding reset_resume function
Elina Pasheva [Fri, 12 Feb 2010 02:37:40 +0000 (18:37 -0800)]
USB: serial: sierra driver adding reset_resume function

This patch adds a new function to the sierra.c driver, sierra_reset_resume().
This new function completes the suite of Dynamic Power Management commands
in the sierra.c driver.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
 drivers/usb/serial/sierra.c |   30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

12 years agoUSB: xhci: Fix finding extended capabilities registers
Edward Shao [Wed, 10 Feb 2010 19:37:30 +0000 (03:37 +0800)]
USB: xhci: Fix finding extended capabilities registers

According "5.3.6 Capability Parameters (HCCPARAMS)" of xHCI rev0.96 spec,
value of xECP register indicates a relative offset, in 32-bit words,
from Base to the beginning of the first extended capability.
The wrong calculation will cause BIOS handoff fail (not handoff from BIOS)
in some platform with BIOS USB legacy sup support.

Signed-off-by: Edward Shao <laface.tw@gmail.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: remove debugging message for uevent constructions
Alan Stern [Mon, 8 Feb 2010 14:45:12 +0000 (09:45 -0500)]
USB: remove debugging message for uevent constructions

This patch (as1332) removes an unneeded and annoying debugging message
announcing all USB uevent constructions.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agotty: Fix various bogus WARN checks in the usb serial layer
Alan Cox [Mon, 8 Feb 2010 10:10:04 +0000 (10:10 +0000)]
tty: Fix various bogus WARN checks in the usb serial layer

We are now refcounted and all the port.count checking is no longer valid
and in fact produces false warnings.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: cp210x: Add 81E8 (Zephyr Bioharness)
Alan Cox [Mon, 8 Feb 2010 10:10:44 +0000 (10:10 +0000)]
USB: cp210x: Add 81E8 (Zephyr Bioharness)

As reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10980

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: Extend and neaten dbg macros
Joe Perches [Sat, 6 Feb 2010 02:09:49 +0000 (18:09 -0800)]
USB: Extend and neaten dbg macros

Add format/argument validation for #ifndef DEBUG dbg macro
Neaten dbg macro definitions

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: Convert concatenated __FILE__ to %s, __FILE__
Joe Perches [Sat, 6 Feb 2010 01:51:13 +0000 (17:51 -0800)]
USB: Convert concatenated __FILE__ to %s, __FILE__

Reduces string space a bit
Neaten a macro redefine of dbg

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: serial: Remove unnecessary \n's from dbg uses
Joe Perches [Sat, 6 Feb 2010 00:50:08 +0000 (16:50 -0800)]
USB: serial: Remove unnecessary \n's from dbg uses

#define dbg adds the newline, messages shouldn't.
Converted dbg("%s", "some string") to dbg("some string")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ehci-dbgp: split PID register updates for IN and OUT pipes
Jason Wessel [Fri, 5 Feb 2010 17:49:05 +0000 (11:49 -0600)]
USB: ehci-dbgp: split PID register updates for IN and OUT pipes

This patch addresses two problems:

1) Bulk reads should always use the DATA0 for the pid, and the write
   PID should toggle between DATA0 and DATA1.  The fix is using
   dbgp_pid_write_update() and dbgp_pid_read_update().

2) The delay loop for waiting for a transaction was not long enough to
   always complete the initial handshake inside dbgp_wait_until_done().
   After the initial handshake the maximum delay length is never reached.

The combined result of these two changes allows for the removal of the
forced resynchronization where a bulk write was issued with a dummy
data payload only to get the device to start accepting data writes
again.

CC: Eric Biederman <ebiederm@xmission.com>
CC: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: serial: Add support for ViVOtech ViVOpay devices.
Forest Bond [Fri, 5 Feb 2010 16:30:28 +0000 (11:30 -0500)]
USB: serial: Add support for ViVOtech ViVOpay devices.

Add support for USB serial interface provided by ViVOtech ViVOpay devices via
new driver vivopay-serial.  Currently only the ViVOpay 8800 device is supported,
but support for similar devices can be added by adding the appropriate device
IDs to the driver.

Signed-off-by: Forest Bond <forest.bond@outpostembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: atmel uaba: Adding invert vbus_pin
Eirik Aanonsen [Fri, 5 Feb 2010 08:49:25 +0000 (09:49 +0100)]
USB: atmel uaba: Adding invert vbus_pin

Adding vbus_pin_inverted so that the usb detect pin can be active high
or low depending on HW implementation also replaced the
gpio_get_value(udc->vbus_pin); with a call to vbus_is_present(udc); This
allows the driver to be loaded and save about 0,15W on the consumption.

Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: Remove unsupported usb gadget drivers
Christoph Egger [Fri, 5 Feb 2010 12:24:12 +0000 (13:24 +0100)]
USB: Remove unsupported usb gadget drivers

A bunch of USB gadget drivers where never ported from the linux 2.4
series to 2.6 kernels. However there's some code still in the tree for
them which isn't used and is probably untested for ages.

As the chance of these drivers being forward ported is probably quite
small now it might be time to get rid of them.

Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: f_mass_storage: fix crash on bind() error
Peter Korsgaard [Thu, 4 Feb 2010 16:15:25 +0000 (17:15 +0100)]
USB: f_mass_storage: fix crash on bind() error

init_completion() hasn't been called yet and the thread isn't created
if we end up here, so don't call complete() on thread_notifier.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: cdc-acm: fix possible deadlock with multiple openers
Oliver Neukum [Wed, 3 Feb 2010 16:10:22 +0000 (17:10 +0100)]
USB: cdc-acm: fix possible deadlock with multiple openers

The lock must be dropped before usb_autopm_interface_put() is called

Signed-off-by: Oliver Neukum <oliver@neukum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: g_mass_storage: min(...) warning fixed
Michal Nazarewicz [Wed, 3 Feb 2010 10:37:17 +0000 (11:37 +0100)]
USB: g_mass_storage: min(...) warning fixed

This patch fixes warning caused by calling min() macro
with arguments of different types:

  drivers/usb/gadget/f_mass_storage.c:623: warning: \
  comparison of distinct pointer types lacks a cast

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Marek Szyprowski <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: musb: test always evaluates to false
Roel Kluin [Tue, 2 Feb 2010 22:47:17 +0000 (14:47 -0800)]
USB: musb: test always evaluates to false

The removed part always evaluates to false.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agoUSB: isp1760: Flush the D-cache for the pipe-in transfer buffers
Catalin Marinas [Tue, 2 Feb 2010 15:31:02 +0000 (15:31 +0000)]
USB: isp1760: Flush the D-cache for the pipe-in transfer buffers

When the HDC driver writes the data to the transfer buffers it pollutes
the D-cache (unlike DMA drivers where the device writes the data). If
the corresponding pages get mapped into user space, there are no
additional cache flushing operations performed and this causes random
user space faults on architectures with separate I and D caches
(Harvard) or those with aliasing D-cache.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Dharm <mdharm-kernel@one-eyed-alien.net>
Cc: Greg KH <greg@kroah.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: add new ftdi_sio device ids
Mitchell Solomon [Fri, 12 Feb 2010 18:23:18 +0000 (13:23 -0500)]
USB: add new ftdi_sio device ids

PID patch for my products

Signed-off-by: Mitchell Solomon <mitchjs@rush2112.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agoUSB: ftdi_sio: Replace BKL with a mutex
Alessio Igor Bogani [Tue, 2 Feb 2010 15:18:28 +0000 (16:18 +0100)]
USB: ftdi_sio: Replace BKL with a mutex

As Alan Cox have pinpointed the driver still required protection against
parallels calls to the config ioctl(). If lock is still necessary the use of
BKL is abused here. So replace BKL with a more convenient mutex.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
12 years agousb: gadgetfs: Convert semaphore to mutex
Thomas Gleixner [Fri, 29 Jan 2010 20:38:59 +0000 (20:38 +0000)]
usb: gadgetfs: Convert semaphore to mutex

The semaphore data->lock is semantically a mutex. Convert it to a real
mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>