Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
authorLinus Torvalds <torvalds@linux-foundation.org>
Wed, 17 Jun 2009 15:46:57 +0000 (08:46 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 17 Jun 2009 15:46:57 +0000 (08:46 -0700)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  get rid of BKL in fs/sysv
  get rid of BKL in fs/minix
  get rid of BKL in fs/efs
  befs ->pust_super() doesn't need BKL
  Cleanup of adfs headers
  9P doesn't need BKL in ->umount_begin()
  fuse doesn't need BKL in ->umount_begin()
  No instance of ->bmap() needs BKL
  remove unlock_kernel() left accidentally
  ext4: avoid unnecessary spinlock in critical POSIX ACL path
  ext3: avoid unnecessary spinlock in critical POSIX ACL path

1271 files changed:
Documentation/DocBook/debugobjects.tmpl
Documentation/accounting/getdelays.c
Documentation/atomic_ops.txt
Documentation/cdrom/packet-writing.txt
Documentation/driver-model/device.txt
Documentation/dvb/get_dvb_firmware
Documentation/fault-injection/fault-injection.txt
Documentation/fb/vesafb.txt
Documentation/filesystems/proc.txt
Documentation/filesystems/vfat.txt
Documentation/firmware_class/README
Documentation/hwmon/f71882fg
Documentation/hwmon/ibmaem
Documentation/hwmon/sysfs-interface
Documentation/hwmon/tmp401 [new file with mode: 0644]
Documentation/hwmon/w83627ehf
Documentation/i2c/busses/i2c-viapro
Documentation/kernel-parameters.txt
Documentation/kmemcheck.txt [new file with mode: 0644]
Documentation/kprobes.txt
Documentation/sysctl/vm.txt
Documentation/trace/ftrace.txt
Documentation/trace/mmiotrace.txt
Documentation/video4linux/CARDLIST.cx23885
Documentation/video4linux/CARDLIST.cx88
Documentation/video4linux/CARDLIST.em28xx
Documentation/video4linux/CARDLIST.saa7134
Documentation/video4linux/CARDLIST.tuner
Documentation/video4linux/gspca.txt
Documentation/video4linux/pxa_camera.txt
Documentation/video4linux/v4l2-framework.txt
Documentation/vm/Makefile
Documentation/vm/balance
Documentation/vm/page-types.c [new file with mode: 0644]
Documentation/vm/pagemap.txt
MAINTAINERS
arch/alpha/include/asm/8253pit.h
arch/alpha/include/asm/kmap_types.h
arch/alpha/kernel/init_task.c
arch/alpha/kernel/irq_alpha.c
arch/alpha/kernel/irq_i8259.c
arch/alpha/kernel/irq_impl.h
arch/alpha/kernel/irq_pyxis.c
arch/alpha/kernel/irq_srm.c
arch/alpha/kernel/setup.c
arch/alpha/kernel/sys_alcor.c
arch/alpha/kernel/sys_cabriolet.c
arch/alpha/kernel/sys_dp264.c
arch/alpha/kernel/sys_eb64p.c
arch/alpha/kernel/sys_eiger.c
arch/alpha/kernel/sys_jensen.c
arch/alpha/kernel/sys_marvel.c
arch/alpha/kernel/sys_mikasa.c
arch/alpha/kernel/sys_noritake.c
arch/alpha/kernel/sys_rawhide.c
arch/alpha/kernel/sys_ruffian.c
arch/alpha/kernel/sys_rx164.c
arch/alpha/kernel/sys_sable.c
arch/alpha/kernel/sys_takara.c
arch/alpha/kernel/sys_titan.c
arch/alpha/kernel/sys_wildfire.c
arch/alpha/mm/numa.c
arch/arm/kernel/init_task.c
arch/arm/mach-pxa/pcm990-baseboard.c
arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h [new file with mode: 0644]
arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h [new file with mode: 0644]
arch/avr32/kernel/init_task.c
arch/blackfin/Kconfig
arch/blackfin/Makefile
arch/blackfin/boot/.gitignore
arch/blackfin/boot/Makefile
arch/blackfin/include/asm/atomic.h
arch/blackfin/include/asm/bfin-global.h
arch/blackfin/include/asm/bitops.h
arch/blackfin/include/asm/bug.h
arch/blackfin/include/asm/cache.h
arch/blackfin/include/asm/cacheflush.h
arch/blackfin/include/asm/cpu.h
arch/blackfin/include/asm/ftrace.h
arch/blackfin/include/asm/ipipe.h
arch/blackfin/include/asm/irq.h
arch/blackfin/include/asm/irqflags.h [new file with mode: 0644]
arch/blackfin/include/asm/kmap_types.h
arch/blackfin/include/asm/mutex-dec.h [deleted file]
arch/blackfin/include/asm/sections.h
arch/blackfin/include/asm/system.h
arch/blackfin/include/asm/unistd.h
arch/blackfin/kernel/Makefile
arch/blackfin/kernel/bfin_dma_5xx.c
arch/blackfin/kernel/bfin_ksyms.c
arch/blackfin/kernel/cplb-mpu/cplbmgr.c
arch/blackfin/kernel/cplb-nompu/cplbmgr.c
arch/blackfin/kernel/early_printk.c
arch/blackfin/kernel/ftrace-entry.S [new file with mode: 0644]
arch/blackfin/kernel/ftrace.c [new file with mode: 0644]
arch/blackfin/kernel/init_task.c
arch/blackfin/kernel/ipipe.c
arch/blackfin/kernel/setup.c
arch/blackfin/kernel/stacktrace.c [new file with mode: 0644]
arch/blackfin/kernel/traps.c
arch/blackfin/kernel/vmlinux.lds.S
arch/blackfin/lib/checksum.c
arch/blackfin/mach-bf518/boards/ezbrd.c
arch/blackfin/mach-bf527/boards/cm_bf527.c
arch/blackfin/mach-bf527/boards/ezbrd.c
arch/blackfin/mach-bf527/boards/ezkit.c
arch/blackfin/mach-bf533/boards/H8606.c
arch/blackfin/mach-bf533/boards/blackstamp.c
arch/blackfin/mach-bf533/boards/cm_bf533.c
arch/blackfin/mach-bf533/boards/ezkit.c
arch/blackfin/mach-bf533/boards/stamp.c
arch/blackfin/mach-bf537/boards/cm_bf537.c
arch/blackfin/mach-bf537/boards/minotaur.c
arch/blackfin/mach-bf537/boards/pnav10.c
arch/blackfin/mach-bf537/boards/stamp.c
arch/blackfin/mach-bf537/boards/tcm_bf537.c
arch/blackfin/mach-bf538/boards/ezkit.c
arch/blackfin/mach-bf548/boards/cm_bf548.c
arch/blackfin/mach-bf548/boards/ezkit.c
arch/blackfin/mach-bf561/boards/cm_bf561.c
arch/blackfin/mach-bf561/boards/ezkit.c
arch/blackfin/mach-common/cache-c.c
arch/blackfin/mach-common/entry.S
arch/blackfin/mach-common/smp.c
arch/cris/include/asm/kmap_types.h
arch/cris/kernel/process.c
arch/frv/kernel/init_task.c
arch/h8300/include/asm/kmap_types.h
arch/h8300/kernel/init_task.c
arch/ia64/hp/common/sba_iommu.c
arch/ia64/include/asm/kmap_types.h
arch/ia64/kernel/init_task.c
arch/ia64/kernel/mca.c
arch/ia64/kernel/perfmon.c
arch/ia64/kernel/uncached.c
arch/ia64/sn/pci/pci_dma.c
arch/m32r/include/asm/kmap_types.h
arch/m32r/kernel/init_task.c
arch/m32r/mm/discontig.c
arch/m32r/platforms/m32104ut/setup.c
arch/m32r/platforms/m32700ut/setup.c
arch/m32r/platforms/mappi/setup.c
arch/m32r/platforms/mappi2/setup.c
arch/m32r/platforms/mappi3/setup.c
arch/m32r/platforms/oaks32r/setup.c
arch/m32r/platforms/opsput/setup.c
arch/m32r/platforms/usrv/setup.c
arch/m68k/include/asm/kmap_types.h
arch/m68k/kernel/process.c
arch/m68knommu/kernel/init_task.c
arch/microblaze/include/asm/kmap_types.h
arch/mips/configs/bigsur_defconfig
arch/mips/configs/mtx1_defconfig
arch/mips/include/asm/i8253.h
arch/mips/include/asm/kmap_types.h
arch/mips/kernel/init_task.c
arch/mips/sni/eisa.c
arch/mn10300/include/asm/kmap_types.h
arch/mn10300/kernel/init_task.c
arch/parisc/include/asm/kmap_types.h
arch/parisc/kernel/init_task.c
arch/powerpc/Kconfig
arch/powerpc/boot/install.sh
arch/powerpc/configs/ppc6xx_defconfig
arch/powerpc/include/asm/8253pit.h
arch/powerpc/include/asm/atomic.h
arch/powerpc/include/asm/hw_irq.h
arch/powerpc/include/asm/iommu.h
arch/powerpc/include/asm/ps3.h
arch/powerpc/include/asm/ps3gpu.h [new file with mode: 0644]
arch/powerpc/include/asm/reg.h
arch/powerpc/include/asm/systbl.h
arch/powerpc/include/asm/unistd.h
arch/powerpc/kernel/Makefile
arch/powerpc/kernel/init_task.c
arch/powerpc/kernel/prom_init.c
arch/powerpc/kernel/setup_64.c
arch/powerpc/kernel/time.c
arch/powerpc/platforms/cell/axon_msi.c
arch/powerpc/platforms/cell/iommu.c
arch/powerpc/platforms/cell/ras.c
arch/powerpc/platforms/cell/spu_base.c
arch/powerpc/platforms/iseries/dt.c
arch/powerpc/platforms/iseries/mf.c
arch/powerpc/platforms/ps3/mm.c
arch/powerpc/platforms/ps3/os-area.c
arch/powerpc/platforms/ps3/platform.h
arch/powerpc/platforms/ps3/setup.c
arch/powerpc/platforms/ps3/system-bus.c
arch/s390/Kconfig
arch/s390/Makefile
arch/s390/appldata/appldata_base.c
arch/s390/include/asm/ccwdev.h
arch/s390/include/asm/ccwgroup.h
arch/s390/include/asm/kmap_types.h
arch/s390/include/asm/suspend.h [new file with mode: 0644]
arch/s390/include/asm/system.h
arch/s390/kernel/early.c
arch/s390/kernel/init_task.c
arch/s390/kernel/mem_detect.c
arch/s390/kernel/smp.c
arch/s390/mm/pgtable.c
arch/s390/power/Makefile [new file with mode: 0644]
arch/s390/power/suspend.c [new file with mode: 0644]
arch/s390/power/swsusp.c [new file with mode: 0644]
arch/s390/power/swsusp_64.c [new file with mode: 0644]
arch/s390/power/swsusp_asm64.S [new file with mode: 0644]
arch/sh/include/asm/kmap_types.h
arch/sh/kernel/init_task.c
arch/sparc/Kconfig
arch/sparc/configs/sparc64_defconfig
arch/sparc/include/asm/cpudata_64.h
arch/sparc/include/asm/dma-mapping.h
arch/sparc/include/asm/dma-mapping_32.h [deleted file]
arch/sparc/include/asm/dma-mapping_64.h [deleted file]
arch/sparc/include/asm/ftrace.h
arch/sparc/include/asm/kmap_types.h
arch/sparc/include/asm/mdesc.h
arch/sparc/include/asm/percpu_64.h
arch/sparc/include/asm/prom.h
arch/sparc/include/asm/trap_block.h [new file with mode: 0644]
arch/sparc/include/asm/unistd.h
arch/sparc/kernel/Makefile
arch/sparc/kernel/cpumap.c [new file with mode: 0644]
arch/sparc/kernel/cpumap.h [new file with mode: 0644]
arch/sparc/kernel/dma.c
arch/sparc/kernel/ds.c
arch/sparc/kernel/ftrace.c
arch/sparc/kernel/head_64.S
arch/sparc/kernel/init_task.c
arch/sparc/kernel/iommu.c
arch/sparc/kernel/irq_64.c
arch/sparc/kernel/mdesc.c
arch/sparc/kernel/of_device_32.c
arch/sparc/kernel/of_device_64.c
arch/sparc/kernel/of_device_common.c [new file with mode: 0644]
arch/sparc/kernel/of_device_common.h [new file with mode: 0644]
arch/sparc/kernel/pci_sun4v.c
arch/sparc/kernel/prom.h
arch/sparc/kernel/prom_64.c
arch/sparc/kernel/prom_common.c
arch/sparc/kernel/smp_64.c
arch/sparc/kernel/systbls_32.S
arch/sparc/kernel/systbls_64.S
arch/sparc/kernel/traps_64.c
arch/sparc/mm/init_32.c
arch/sparc/mm/init_64.c
arch/sparc/mm/srmmu.c
arch/um/drivers/net_kern.c
arch/um/drivers/ubd_kern.c
arch/um/include/shared/init.h
arch/um/include/shared/net_user.h
arch/um/kernel/init_task.c
arch/um/kernel/irq.c
arch/um/sys-i386/stub.S
arch/um/sys-x86_64/asm/elf.h
arch/um/sys-x86_64/stub.S
arch/x86/Kconfig
arch/x86/Makefile
arch/x86/include/asm/dma-mapping.h
arch/x86/include/asm/kmap_types.h
arch/x86/include/asm/kmemcheck.h [new file with mode: 0644]
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/pgtable_types.h
arch/x86/include/asm/string_32.h
arch/x86/include/asm/string_64.h
arch/x86/include/asm/thread_info.h
arch/x86/include/asm/timex.h
arch/x86/include/asm/xor.h
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
arch/x86/kernel/cpuid.c
arch/x86/kernel/i8253.c
arch/x86/kernel/init_task.c
arch/x86/kernel/microcode_core.c
arch/x86/kernel/msr.c
arch/x86/kernel/process.c
arch/x86/kernel/stacktrace.c
arch/x86/kernel/traps.c
arch/x86/kernel/tsc.c
arch/x86/kvm/vmx.c
arch/x86/mm/Makefile
arch/x86/mm/fault.c
arch/x86/mm/init.c
arch/x86/mm/init_32.c
arch/x86/mm/init_64.c
arch/x86/mm/kmemcheck/Makefile [new file with mode: 0644]
arch/x86/mm/kmemcheck/error.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/error.h [new file with mode: 0644]
arch/x86/mm/kmemcheck/kmemcheck.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/opcode.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/opcode.h [new file with mode: 0644]
arch/x86/mm/kmemcheck/pte.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/pte.h [new file with mode: 0644]
arch/x86/mm/kmemcheck/selftest.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/selftest.h [new file with mode: 0644]
arch/x86/mm/kmemcheck/shadow.c [new file with mode: 0644]
arch/x86/mm/kmemcheck/shadow.h [new file with mode: 0644]
arch/x86/mm/pageattr.c
arch/x86/mm/pgtable.c
arch/xtensa/include/asm/kmap_types.h
arch/xtensa/kernel/init_task.c
block/blk-core.c
block/blk-settings.c
block/bsg.c
block/cfq-iosched.c
block/genhd.c
crypto/xor.c
drivers/Kconfig
drivers/Makefile
drivers/acpi/acpica/acevents.h
drivers/acpi/acpica/acglobal.h
drivers/acpi/acpica/aclocal.h
drivers/acpi/acpica/acnamesp.h
drivers/acpi/acpica/amlcode.h
drivers/acpi/acpica/dsobject.c
drivers/acpi/acpica/dsopcode.c
drivers/acpi/acpica/dswstate.c
drivers/acpi/acpica/evregion.c
drivers/acpi/acpica/evxfevnt.c
drivers/acpi/acpica/exconfig.c
drivers/acpi/acpica/excreate.c
drivers/acpi/acpica/exdump.c
drivers/acpi/acpica/exfldio.c
drivers/acpi/acpica/exmutex.c
drivers/acpi/acpica/exstore.c
drivers/acpi/acpica/hwregs.c
drivers/acpi/acpica/nsalloc.c
drivers/acpi/acpica/nsnames.c
drivers/acpi/acpica/nsobject.c
drivers/acpi/acpica/nspredef.c
drivers/acpi/acpica/nssearch.c
drivers/acpi/acpica/nswalk.c
drivers/acpi/acpica/nsxfname.c
drivers/acpi/acpica/nsxfobj.c
drivers/acpi/acpica/rscalc.c
drivers/acpi/acpica/rsxface.c
drivers/acpi/acpica/tbfadt.c
drivers/acpi/acpica/tbinstal.c
drivers/acpi/acpica/utcopy.c
drivers/acpi/acpica/utdebug.c
drivers/acpi/acpica/utdelete.c
drivers/acpi/acpica/utmisc.c
drivers/acpi/acpica/utmutex.c
drivers/base/core.c
drivers/base/dd.c
drivers/base/firmware_class.c
drivers/base/node.c
drivers/base/platform.c
drivers/base/sys.c
drivers/block/aoe/aoechr.c
drivers/block/cciss.c
drivers/block/mg_disk.c
drivers/block/pktcdvd.c
drivers/block/ps3disk.c
drivers/block/ps3vram.c
drivers/block/xen-blkfront.c
drivers/char/hvc_iucv.c
drivers/char/hvcs.c
drivers/char/hw_random/core.c
drivers/char/ipmi/ipmi_si_intf.c
drivers/char/misc.c
drivers/char/ps3flash.c
drivers/char/pty.c
drivers/char/raw.c
drivers/char/tty_io.c
drivers/char/tty_ioctl.c
drivers/char/tty_ldisc.c
drivers/char/vt.c
drivers/clocksource/acpi_pm.c
drivers/eisa/eisa.ids
drivers/eisa/pci_eisa.c
drivers/eisa/virtual_root.c
drivers/firewire/Makefile
drivers/firewire/core-card.c [moved from drivers/firewire/fw-card.c with 97% similarity]
drivers/firewire/core-cdev.c [moved from drivers/firewire/fw-cdev.c with 99% similarity]
drivers/firewire/core-device.c [moved from drivers/firewire/fw-device.c with 88% similarity]
drivers/firewire/core-iso.c [moved from drivers/firewire/fw-iso.c with 99% similarity]
drivers/firewire/core-topology.c [moved from drivers/firewire/fw-topology.c with 97% similarity]
drivers/firewire/core-transaction.c [moved from drivers/firewire/fw-transaction.c with 97% similarity]
drivers/firewire/core.h [new file with mode: 0644]
drivers/firewire/fw-device.h [deleted file]
drivers/firewire/fw-topology.h [deleted file]
drivers/firewire/fw-transaction.h [deleted file]
drivers/firewire/ohci.c [moved from drivers/firewire/fw-ohci.c with 99% similarity]
drivers/firewire/ohci.h [moved from drivers/firewire/fw-ohci.h with 98% similarity]
drivers/firewire/sbp2.c [moved from drivers/firewire/fw-sbp2.c with 96% similarity]
drivers/firmware/memmap.c
drivers/gpu/drm/Kconfig
drivers/gpu/drm/Makefile
drivers/gpu/drm/drm_debugfs.c
drivers/gpu/drm/drm_drv.c
drivers/gpu/drm/drm_mm.c
drivers/gpu/drm/drm_stub.c
drivers/gpu/drm/drm_sysfs.c
drivers/gpu/drm/i915/intel_fb.c
drivers/gpu/drm/radeon/Kconfig [new file with mode: 0644]
drivers/gpu/drm/radeon/Makefile
drivers/gpu/drm/radeon/ObjectID.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atom-bits.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atom-names.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atom-types.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atom.c [new file with mode: 0644]
drivers/gpu/drm/radeon/atom.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atombios.h [new file with mode: 0644]
drivers/gpu/drm/radeon/atombios_crtc.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r100.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r300.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r300_reg.h
drivers/gpu/drm/radeon/r420.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r500_reg.h [new file with mode: 0644]
drivers/gpu/drm/radeon/r520.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r600.c [new file with mode: 0644]
drivers/gpu/drm/radeon/r600_reg.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_agp.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_asic.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_atombios.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_benchmark.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_bios.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_clocks.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_combios.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_connectors.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_cs.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_cursor.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_device.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_display.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_drv.c
drivers/gpu/drm/radeon/radeon_encoders.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_fb.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_fence.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_fixed.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_gart.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_gem.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_i2c.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_irq_kms.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_kms.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_legacy_crtc.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_legacy_encoders.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_mode.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_object.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_object.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_reg.h [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_ring.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_ttm.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rs400.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rs600.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rs690.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rs780.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rv515.c [new file with mode: 0644]
drivers/gpu/drm/radeon/rv770.c [new file with mode: 0644]
drivers/gpu/drm/ttm/Makefile [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_agp_backend.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_bo.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_bo_util.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_bo_vm.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_global.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_memory.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_module.c [new file with mode: 0644]
drivers/gpu/drm/ttm/ttm_tt.c [new file with mode: 0644]
drivers/hid/usbhid/hiddev.c
drivers/hwmon/Kconfig
drivers/hwmon/Makefile
drivers/hwmon/f71882fg.c
drivers/hwmon/hp_accel.c
drivers/hwmon/hwmon.c
drivers/hwmon/ibmaem.c
drivers/hwmon/lis3lv02d.c
drivers/hwmon/lis3lv02d.h
drivers/hwmon/lis3lv02d_spi.c
drivers/hwmon/max6650.c
drivers/hwmon/sht15.c
drivers/hwmon/tmp401.c [new file with mode: 0644]
drivers/hwmon/w83627ehf.c
drivers/i2c/busses/Kconfig
drivers/i2c/busses/Makefile
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-au1550.c
drivers/i2c/busses/i2c-bfin-twi.c
drivers/i2c/busses/i2c-highlander.c
drivers/i2c/busses/i2c-mv64xxx.c
drivers/i2c/busses/i2c-ocores.c
drivers/i2c/busses/i2c-omap.c
drivers/i2c/busses/i2c-pca-platform.c
drivers/i2c/busses/i2c-pmcmsp.c
drivers/i2c/busses/i2c-pxa.c
drivers/i2c/busses/i2c-s3c2410.c
drivers/i2c/busses/i2c-stu300.c [new file with mode: 0644]
drivers/i2c/busses/i2c-versatile.c
drivers/i2c/busses/i2c-viapro.c
drivers/i2c/busses/i2c-voodoo3.c
drivers/i2c/chips/Kconfig
drivers/i2c/chips/Makefile
drivers/i2c/i2c-core.c
drivers/ide/ide-pm.c
drivers/ide/ide-probe.c
drivers/ide/ide_platform.c
drivers/ieee1394/csr1212.c
drivers/ieee1394/eth1394.c
drivers/ieee1394/nodemgr.c
drivers/ieee1394/sbp2.c
drivers/infiniband/core/sysfs.c
drivers/infiniband/hw/ehca/ehca_main.c
drivers/input/input.c
drivers/input/joystick/analog.c
drivers/input/misc/pcspkr.c
drivers/input/touchscreen/wm97xx-core.c
drivers/input/xen-kbdfront.c
drivers/macintosh/therm_adt746x.c
drivers/macintosh/therm_pm72.c
drivers/macintosh/therm_windtunnel.c
drivers/macintosh/windfarm_lm75_sensor.c
drivers/macintosh/windfarm_max6690_sensor.c
drivers/macintosh/windfarm_smu_sat.c
drivers/md/dm-ioctl.c
drivers/md/dm.c
drivers/media/Kconfig
drivers/media/common/tuners/tuner-simple.c
drivers/media/common/tuners/tuner-types.c
drivers/media/common/tuners/tuner-xc2028.c
drivers/media/common/tuners/xc5000.c
drivers/media/dvb/b2c2/flexcop-common.h
drivers/media/dvb/b2c2/flexcop-fe-tuner.c
drivers/media/dvb/b2c2/flexcop-i2c.c
drivers/media/dvb/b2c2/flexcop-misc.c
drivers/media/dvb/bt8xx/bt878.c
drivers/media/dvb/dm1105/dm1105.c
drivers/media/dvb/dvb-core/dmxdev.c
drivers/media/dvb/dvb-core/dvb_demux.c
drivers/media/dvb/dvb-core/dvb_demux.h
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/dvb-core/dvbdev.c
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/af9015.c
drivers/media/dvb/dvb-usb/dib0700_devices.c
drivers/media/dvb/dvb-usb/dibusb-common.c
drivers/media/dvb/dvb-usb/dvb-usb-ids.h
drivers/media/dvb/dvb-usb/dvb-usb.h
drivers/media/dvb/dvb-usb/dw2102.c
drivers/media/dvb/dvb-usb/dw2102.h
drivers/media/dvb/dvb-usb/gp8psk.c
drivers/media/dvb/firewire/firedtv-1394.c
drivers/media/dvb/firewire/firedtv-dvb.c
drivers/media/dvb/firewire/firedtv-rc.c
drivers/media/dvb/frontends/Kconfig
drivers/media/dvb/frontends/Makefile
drivers/media/dvb/frontends/af9013.c
drivers/media/dvb/frontends/au8522_dig.c
drivers/media/dvb/frontends/cx24116.c
drivers/media/dvb/frontends/drx397xD.c
drivers/media/dvb/frontends/isl6423.c [new file with mode: 0644]
drivers/media/dvb/frontends/isl6423.h [new file with mode: 0644]
drivers/media/dvb/frontends/lgdt3305.c
drivers/media/dvb/frontends/lgs8gxx.c
drivers/media/dvb/frontends/lnbp21.c
drivers/media/dvb/frontends/mt312.c
drivers/media/dvb/frontends/nxt200x.c
drivers/media/dvb/frontends/or51132.c
drivers/media/dvb/frontends/stv0900_priv.h
drivers/media/dvb/frontends/stv090x.c [new file with mode: 0644]
drivers/media/dvb/frontends/stv090x.h [new file with mode: 0644]
drivers/media/dvb/frontends/stv090x_priv.h [new file with mode: 0644]
drivers/media/dvb/frontends/stv090x_reg.h [new file with mode: 0644]
drivers/media/dvb/frontends/stv6110x.c [new file with mode: 0644]
drivers/media/dvb/frontends/stv6110x.h [new file with mode: 0644]
drivers/media/dvb/frontends/stv6110x_priv.h [new file with mode: 0644]
drivers/media/dvb/frontends/stv6110x_reg.h [new file with mode: 0644]
drivers/media/dvb/frontends/tda10048.c
drivers/media/dvb/frontends/tda10048.h
drivers/media/dvb/siano/Makefile
drivers/media/dvb/siano/sms-cards.c
drivers/media/dvb/siano/sms-cards.h
drivers/media/dvb/siano/smscoreapi.c
drivers/media/dvb/siano/smscoreapi.h
drivers/media/dvb/siano/smsdvb.c
drivers/media/dvb/siano/smsendian.c [new file with mode: 0644]
drivers/media/dvb/siano/smsendian.h [new file with mode: 0644]
drivers/media/dvb/siano/smsir.c [new file with mode: 0644]
drivers/media/dvb/siano/smsir.h [new file with mode: 0644]
drivers/media/dvb/siano/smssdio.c [new file with mode: 0644]
drivers/media/dvb/siano/smsusb.c
drivers/media/dvb/ttpci/av7110_av.c
drivers/media/dvb/ttpci/av7110_hw.c
drivers/media/dvb/ttpci/av7110_v4l.c
drivers/media/dvb/ttpci/budget-av.c
drivers/media/dvb/ttpci/budget.c
drivers/media/radio/dsbr100.c
drivers/media/radio/radio-mr800.c
drivers/media/radio/radio-sf16fmi.c
drivers/media/radio/radio-sf16fmr2.c
drivers/media/radio/radio-si470x.c
drivers/media/video/Kconfig
drivers/media/video/Makefile
drivers/media/video/adv7343.c [new file with mode: 0644]
drivers/media/video/adv7343_regs.h [new file with mode: 0644]
drivers/media/video/au0828/au0828-cards.c
drivers/media/video/au0828/au0828-core.c
drivers/media/video/au0828/au0828-video.c
drivers/media/video/bt8xx/bttv-driver.c
drivers/media/video/bt8xx/bttv-i2c.c
drivers/media/video/cpia2/cpia2_v4l.c
drivers/media/video/cx18/cx18-audio.c
drivers/media/video/cx18/cx18-av-core.c
drivers/media/video/cx18/cx18-av-firmware.c
drivers/media/video/cx18/cx18-av-vbi.c
drivers/media/video/cx18/cx18-cards.c
drivers/media/video/cx18/cx18-controls.c
drivers/media/video/cx18/cx18-driver.c
drivers/media/video/cx18/cx18-driver.h
drivers/media/video/cx18/cx18-dvb.c
drivers/media/video/cx18/cx18-fileops.c
drivers/media/video/cx18/cx18-mailbox.c
drivers/media/video/cx18/cx18-mailbox.h
drivers/media/video/cx18/cx18-queue.c
drivers/media/video/cx18/cx18-streams.c
drivers/media/video/cx18/cx18-streams.h
drivers/media/video/cx18/cx18-version.h
drivers/media/video/cx231xx/cx231xx-avcore.c
drivers/media/video/cx231xx/cx231xx-cards.c
drivers/media/video/cx231xx/cx231xx-i2c.c
drivers/media/video/cx231xx/cx231xx-input.c
drivers/media/video/cx231xx/cx231xx-vbi.c
drivers/media/video/cx231xx/cx231xx.h
drivers/media/video/cx23885/cimax2.c
drivers/media/video/cx23885/cx23885-417.c
drivers/media/video/cx23885/cx23885-cards.c
drivers/media/video/cx23885/cx23885-core.c
drivers/media/video/cx23885/cx23885-dvb.c
drivers/media/video/cx23885/cx23885-i2c.c
drivers/media/video/cx23885/cx23885-video.c
drivers/media/video/cx23885/cx23885.h
drivers/media/video/cx88/Makefile
drivers/media/video/cx88/cx88-alsa.c
drivers/media/video/cx88/cx88-cards.c
drivers/media/video/cx88/cx88-core.c
drivers/media/video/cx88/cx88-dsp.c [new file with mode: 0644]
drivers/media/video/cx88/cx88-dvb.c
drivers/media/video/cx88/cx88-i2c.c
drivers/media/video/cx88/cx88-input.c
drivers/media/video/cx88/cx88-tvaudio.c
drivers/media/video/cx88/cx88-video.c
drivers/media/video/cx88/cx88.h
drivers/media/video/dabusb.c
drivers/media/video/em28xx/em28xx-audio.c
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-core.c
drivers/media/video/em28xx/em28xx-dvb.c
drivers/media/video/em28xx/em28xx-i2c.c
drivers/media/video/em28xx/em28xx-input.c
drivers/media/video/em28xx/em28xx-reg.h
drivers/media/video/em28xx/em28xx.h
drivers/media/video/gspca/finepix.c
drivers/media/video/gspca/gspca.c
drivers/media/video/gspca/gspca.h
drivers/media/video/gspca/m5602/Makefile
drivers/media/video/gspca/m5602/m5602_bridge.h
drivers/media/video/gspca/m5602/m5602_core.c
drivers/media/video/gspca/m5602/m5602_mt9m111.c
drivers/media/video/gspca/m5602/m5602_mt9m111.h
drivers/media/video/gspca/m5602/m5602_ov7660.c [new file with mode: 0644]
drivers/media/video/gspca/m5602/m5602_ov7660.h [new file with mode: 0644]
drivers/media/video/gspca/m5602/m5602_ov9650.c
drivers/media/video/gspca/m5602/m5602_ov9650.h
drivers/media/video/gspca/m5602/m5602_po1030.c
drivers/media/video/gspca/m5602/m5602_po1030.h
drivers/media/video/gspca/m5602/m5602_s5k4aa.c
drivers/media/video/gspca/m5602/m5602_s5k4aa.h
drivers/media/video/gspca/m5602/m5602_s5k83a.c
drivers/media/video/gspca/m5602/m5602_s5k83a.h
drivers/media/video/gspca/m5602/m5602_sensor.h
drivers/media/video/gspca/mr97310a.c
drivers/media/video/gspca/ov519.c
drivers/media/video/gspca/ov534.c
drivers/media/video/gspca/sonixb.c
drivers/media/video/gspca/sonixj.c
drivers/media/video/gspca/spca500.c
drivers/media/video/gspca/spca505.c
drivers/media/video/gspca/spca508.c
drivers/media/video/gspca/spca561.c
drivers/media/video/gspca/sq905.c
drivers/media/video/gspca/sq905c.c
drivers/media/video/gspca/stv06xx/stv06xx.c
drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
drivers/media/video/gspca/sunplus.c
drivers/media/video/gspca/t613.c
drivers/media/video/gspca/vc032x.c
drivers/media/video/gspca/zc3xx.c
drivers/media/video/hexium_gemini.c
drivers/media/video/hexium_orion.c
drivers/media/video/ir-kbd-i2c.c
drivers/media/video/ivtv/ivtv-driver.c
drivers/media/video/ivtv/ivtv-i2c.c
drivers/media/video/ivtv/ivtv-ioctl.c
drivers/media/video/mt9m001.c
drivers/media/video/mt9m111.c
drivers/media/video/mt9t031.c
drivers/media/video/mt9v022.c
drivers/media/video/mx1_camera.c
drivers/media/video/mx3_camera.c
drivers/media/video/mxb.c
drivers/media/video/ov511.c
drivers/media/video/ov511.h
drivers/media/video/pvrusb2/pvrusb2-devattr.c
drivers/media/video/pvrusb2/pvrusb2-devattr.h
drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
drivers/media/video/pvrusb2/pvrusb2-hdw.c
drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
drivers/media/video/pvrusb2/pvrusb2-sysfs.c
drivers/media/video/pvrusb2/pvrusb2-v4l2.c
drivers/media/video/pwc/pwc-if.c
drivers/media/video/pwc/pwc-v4l.c
drivers/media/video/pxa_camera.c
drivers/media/video/s2255drv.c
drivers/media/video/saa7134/Kconfig
drivers/media/video/saa7134/Makefile
drivers/media/video/saa7134/saa7134-cards.c
drivers/media/video/saa7134/saa7134-core.c
drivers/media/video/saa7134/saa7134-dvb.c
drivers/media/video/saa7134/saa7134-empress.c
drivers/media/video/saa7134/saa7134-i2c.c
drivers/media/video/saa7134/saa7134-input.c
drivers/media/video/saa7134/saa7134-ts.c
drivers/media/video/saa7134/saa7134-video.c
drivers/media/video/saa7134/saa7134.h
drivers/media/video/se401.c
drivers/media/video/se401.h
drivers/media/video/sh_mobile_ceu_camera.c
drivers/media/video/soc_camera.c
drivers/media/video/stk-webcam.c
drivers/media/video/tda7432.c
drivers/media/video/tea6415c.c
drivers/media/video/tea6420.c
drivers/media/video/ths7303.c [new file with mode: 0644]
drivers/media/video/tuner-core.c
drivers/media/video/tveeprom.c
drivers/media/video/tvp514x.c
drivers/media/video/usbvideo/konicawc.c
drivers/media/video/usbvideo/quickcam_messenger.c
drivers/media/video/usbvision/usbvision-core.c
drivers/media/video/usbvision/usbvision-video.c
drivers/media/video/uvc/uvc_ctrl.c
drivers/media/video/uvc/uvc_driver.c
drivers/media/video/uvc/uvc_queue.c
drivers/media/video/uvc/uvc_status.c
drivers/media/video/uvc/uvc_v4l2.c
drivers/media/video/uvc/uvc_video.c
drivers/media/video/uvc/uvcvideo.h
drivers/media/video/v4l2-common.c
drivers/media/video/v4l2-device.c
drivers/media/video/videobuf-core.c
drivers/media/video/videobuf-dma-contig.c
drivers/media/video/videobuf-dma-sg.c
drivers/media/video/vino.c
drivers/media/video/zoran/zoran_card.c
drivers/media/video/zr364xx.c
drivers/mfd/htc-pasic3.c
drivers/mfd/pcf50633-core.c
drivers/mfd/wm8400-core.c
drivers/misc/c2port/core.c
drivers/misc/eeprom/Kconfig
drivers/misc/eeprom/Makefile
drivers/misc/eeprom/max6875.c [moved from drivers/i2c/chips/max6875.c with 99% similarity]
drivers/misc/sgi-gru/grufile.c
drivers/misc/sgi-xp/xpc_uv.c
drivers/net/Kconfig
drivers/net/ps3_gelic_net.c
drivers/net/tun.c
drivers/net/wimax/i2400m/i2400m.h
drivers/net/wireless/ath/ath5k/Kconfig
drivers/net/wireless/libertas/README
drivers/net/wireless/libertas/if_spi.c
drivers/net/wireless/libertas/if_spi.h
drivers/net/wireless/libertas/if_usb.c
drivers/net/xen-netfront.c
drivers/parisc/eisa.c
drivers/parisc/sba_iommu.c
drivers/parport/parport_gsc.c
drivers/pci/pci.c
drivers/pci/pcie/portdrv_core.c
drivers/pcmcia/ds.c
drivers/pcmcia/pcmcia_ioctl.c
drivers/ps3/ps3-sys-manager.c
drivers/ps3/ps3av.c
drivers/ps3/ps3av_cmd.c
drivers/s390/block/dasd.c
drivers/s390/block/dasd_devmap.c
drivers/s390/block/dasd_eckd.c
drivers/s390/block/dasd_fba.c
drivers/s390/block/dasd_int.h
drivers/s390/block/dcssblk.c
drivers/s390/block/xpram.c
drivers/s390/char/con3215.c
drivers/s390/char/con3270.c
drivers/s390/char/fs3270.c
drivers/s390/char/monreader.c
drivers/s390/char/monwriter.c
drivers/s390/char/raw3270.c
drivers/s390/char/raw3270.h
drivers/s390/char/sclp.c
drivers/s390/char/sclp.h
drivers/s390/char/sclp_cmd.c
drivers/s390/char/sclp_con.c
drivers/s390/char/sclp_rw.c
drivers/s390/char/sclp_rw.h
drivers/s390/char/sclp_vt220.c
drivers/s390/char/tape.h
drivers/s390/char/tape_34xx.c
drivers/s390/char/tape_3590.c
drivers/s390/char/tape_core.c
drivers/s390/char/vmlogrdr.c
drivers/s390/char/vmur.c
drivers/s390/char/vmwatchdog.c
drivers/s390/cio/ccwgroup.c
drivers/s390/cio/chsc.c
drivers/s390/cio/chsc.h
drivers/s390/cio/chsc_sch.c
drivers/s390/cio/cmf.c
drivers/s390/cio/css.c
drivers/s390/cio/css.h
drivers/s390/cio/device.c
drivers/s390/cio/device.h
drivers/s390/cio/device_fsm.c
drivers/s390/cio/device_ops.c
drivers/s390/cio/io_sch.h
drivers/s390/net/claw.c
drivers/s390/net/ctcm_main.c
drivers/s390/net/lcs.c
drivers/s390/net/lcs.h
drivers/s390/net/netiucv.c
drivers/s390/net/qeth_core_main.c
drivers/s390/net/qeth_l2_main.c
drivers/s390/net/qeth_l3_main.c
drivers/s390/net/smsgiucv.c
drivers/s390/scsi/zfcp_ccw.c
drivers/sbus/char/openprom.c
drivers/scsi/aha1740.c
drivers/scsi/ibmvscsi/ibmvscsi.c
drivers/scsi/ibmvscsi/ibmvstgt.c
drivers/scsi/libsrp.c
drivers/scsi/lpfc/lpfc_debugfs.c
drivers/serial/atmel_serial.c
drivers/serial/imx.c
drivers/serial/of_serial.c
drivers/spi/spi_bfin5xx.c
drivers/spi/spi_mpc83xx.c
drivers/staging/Kconfig
drivers/staging/uc2322/aten2011.c
drivers/thermal/thermal_sys.c
drivers/usb/Kconfig
drivers/usb/Makefile
drivers/usb/atm/ueagle-atm.c
drivers/usb/class/cdc-acm.c
drivers/usb/class/cdc-acm.h
drivers/usb/class/usblp.c
drivers/usb/class/usbtmc.c
drivers/usb/core/Kconfig
drivers/usb/core/Makefile
drivers/usb/core/config.c
drivers/usb/core/driver.c
drivers/usb/core/endpoint.c
drivers/usb/core/file.c
drivers/usb/core/hcd-pci.c
drivers/usb/core/hcd.c
drivers/usb/core/hcd.h
drivers/usb/core/hub.c
drivers/usb/core/hub.h
drivers/usb/core/message.c
drivers/usb/core/sysfs.c
drivers/usb/core/urb.c
drivers/usb/core/usb.c
drivers/usb/core/usb.h
drivers/usb/gadget/Kconfig
drivers/usb/gadget/Makefile
drivers/usb/gadget/at91_udc.c
drivers/usb/gadget/atmel_usba_udc.c
drivers/usb/gadget/audio.c [new file with mode: 0644]
drivers/usb/gadget/ci13xxx_udc.c
drivers/usb/gadget/f_audio.c [new file with mode: 0644]
drivers/usb/gadget/f_rndis.c
drivers/usb/gadget/file_storage.c
drivers/usb/gadget/fsl_mx3_udc.c [new file with mode: 0644]
drivers/usb/gadget/fsl_udc_core.c [moved from drivers/usb/gadget/fsl_usb2_udc.c with 99% similarity]
drivers/usb/gadget/fsl_usb2_udc.h
drivers/usb/gadget/gadget_chips.h
drivers/usb/gadget/goku_udc.c
drivers/usb/gadget/imx_udc.c
drivers/usb/gadget/inode.c
drivers/usb/gadget/langwell_udc.c [new file with mode: 0644]
drivers/usb/gadget/langwell_udc.h [new file with mode: 0644]
drivers/usb/gadget/pxa27x_udc.c
drivers/usb/gadget/pxa27x_udc.h
drivers/usb/gadget/s3c-hsotg.c [new file with mode: 0644]
drivers/usb/gadget/u_audio.c [new file with mode: 0644]
drivers/usb/gadget/u_audio.h [new file with mode: 0644]
drivers/usb/gadget/u_serial.c
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/ehci-au1xxx.c
drivers/usb/host/ehci-fsl.c
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-hub.c
drivers/usb/host/ehci-ixp4xx.c
drivers/usb/host/ehci-orion.c
drivers/usb/host/ehci-pci.c
drivers/usb/host/ehci-ppc-of.c
drivers/usb/host/ehci-ps3.c
drivers/usb/host/ehci-q.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci.h
drivers/usb/host/fhci-dbg.c
drivers/usb/host/hwa-hc.c
drivers/usb/host/ohci-dbg.c
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/ohci-ps3.c
drivers/usb/host/pci-quirks.c
drivers/usb/host/r8a66597-hcd.c
drivers/usb/host/r8a66597.h
drivers/usb/host/uhci-hcd.c
drivers/usb/host/uhci-q.c
drivers/usb/host/xhci-dbg.c [new file with mode: 0644]
drivers/usb/host/xhci-ext-caps.h [new file with mode: 0644]
drivers/usb/host/xhci-hcd.c [new file with mode: 0644]
drivers/usb/host/xhci-hub.c [new file with mode: 0644]
drivers/usb/host/xhci-mem.c [new file with mode: 0644]
drivers/usb/host/xhci-pci.c [new file with mode: 0644]
drivers/usb/host/xhci-ring.c [new file with mode: 0644]
drivers/usb/host/xhci.h [new file with mode: 0644]
drivers/usb/misc/iowarrior.c
drivers/usb/misc/legousbtower.c
drivers/usb/misc/sisusbvga/Kconfig
drivers/usb/misc/usbtest.c
drivers/usb/mon/mon_text.c
drivers/usb/musb/Kconfig
drivers/usb/musb/blackfin.c
drivers/usb/musb/cppi_dma.c
drivers/usb/musb/cppi_dma.h
drivers/usb/musb/davinci.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_core.h
drivers/usb/musb/musb_gadget.c
drivers/usb/musb/musb_gadget_ep0.c
drivers/usb/musb/musb_host.c
drivers/usb/musb/musb_host.h
drivers/usb/musb/musb_virthub.c
drivers/usb/musb/omap2430.c
drivers/usb/musb/tusb6010.c
drivers/usb/otg/Kconfig
drivers/usb/otg/Makefile
drivers/usb/otg/langwell_otg.c [new file with mode: 0644]
drivers/usb/otg/nop-usb-xceiv.c
drivers/usb/otg/twl4030-usb.c
drivers/usb/serial/aircable.c
drivers/usb/serial/belkin_sa.c
drivers/usb/serial/bus.c
drivers/usb/serial/cp210x.c
drivers/usb/serial/cyberjack.c
drivers/usb/serial/cypress_m8.c
drivers/usb/serial/digi_acceleport.c
drivers/usb/serial/empeg.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/garmin_gps.c
drivers/usb/serial/generic.c
drivers/usb/serial/io_edgeport.c
drivers/usb/serial/io_tables.h
drivers/usb/serial/io_ti.c
drivers/usb/serial/ipaq.c
drivers/usb/serial/iuu_phoenix.c
drivers/usb/serial/keyspan.c
drivers/usb/serial/keyspan.h
drivers/usb/serial/keyspan_pda.c
drivers/usb/serial/kl5kusb105.c
drivers/usb/serial/kobil_sct.c
drivers/usb/serial/mct_u232.c
drivers/usb/serial/mos7720.c
drivers/usb/serial/mos7840.c
drivers/usb/serial/omninet.c
drivers/usb/serial/opticon.c
drivers/usb/serial/option.c
drivers/usb/serial/oti6858.c
drivers/usb/serial/pl2303.c
drivers/usb/serial/sierra.c
drivers/usb/serial/spcp8x5.c
drivers/usb/serial/symbolserial.c
drivers/usb/serial/ti_usb_3410_5052.c
drivers/usb/serial/usb-serial.c
drivers/usb/serial/usb_debug.c
drivers/usb/serial/visor.c
drivers/usb/serial/whiteheat.c
drivers/usb/storage/initializers.c
drivers/usb/storage/option_ms.c
drivers/usb/storage/sierra_ms.c
drivers/usb/storage/unusual_devs.h
drivers/video/Kconfig
drivers/video/acornfb.c
drivers/video/atmel_lcdfb.c
drivers/video/aty/radeon_pm.c
drivers/video/bf54x-lq043fb.c
drivers/video/bfin-t350mcqb-fb.c
drivers/video/bw2.c
drivers/video/carminefb.c
drivers/video/cg14.c
drivers/video/cg3.c
drivers/video/cg6.c
drivers/video/chipsfb.c
drivers/video/efifb.c
drivers/video/fbmem.c
drivers/video/igafb.c
drivers/video/intelfb/intelfbdrv.c
drivers/video/leo.c
drivers/video/logo/Makefile
drivers/video/logo/logo.c
drivers/video/mb862xx/mb862xxfb.c
drivers/video/modedb.c
drivers/video/offb.c
drivers/video/p9100.c
drivers/video/pm2fb.c
drivers/video/ps3fb.c
drivers/video/s1d13xxxfb.c
drivers/video/s3c-fb.c
drivers/video/s3c2410fb.c
drivers/video/s3c2410fb.h
drivers/video/sis/sis_main.c
drivers/video/stifb.c
drivers/video/tcx.c
drivers/video/tdfxfb.c
drivers/video/vesafb.c
drivers/video/xen-fbfront.c
drivers/vlynq/Kconfig [new file with mode: 0644]
drivers/vlynq/Makefile [new file with mode: 0644]
drivers/vlynq/vlynq.c [new file with mode: 0644]
fs/Kconfig
fs/afs/misc.c
fs/afs/vlocation.c
fs/befs/linuxvfs.c
fs/bio.c
fs/btrfs/disk-io.c
fs/btrfs/transaction.c
fs/debugfs/file.c
fs/debugfs/inode.c
fs/drop_caches.c
fs/fat/cache.c
fs/fat/dir.c
fs/fat/fat.h
fs/fat/fatent.c
fs/fat/file.c
fs/fat/inode.c
fs/fat/misc.c
fs/fat/namei_msdos.c
fs/fat/namei_vfat.c
fs/fcntl.c
fs/fs-writeback.c
fs/isofs/joliet.c
fs/jfs/jfs_extent.c
fs/ncpfs/ncplib_kernel.c
fs/nfs/iostat.h
fs/nls/nls_base.c
fs/nls/nls_utf8.c
fs/ntfs/inode.c
fs/ntfs/logfile.c
fs/ocfs2/alloc.c
fs/ocfs2/blockcheck.c
fs/ocfs2/blockcheck.h
fs/ocfs2/cluster/masklog.h
fs/ocfs2/cluster/tcp.c
fs/ocfs2/dir.c
fs/ocfs2/dlmglue.c
fs/ocfs2/dlmglue.h
fs/ocfs2/file.c
fs/ocfs2/journal.c
fs/ocfs2/journal.h
fs/ocfs2/ocfs2.h
fs/ocfs2/ocfs2_lockid.h
fs/ocfs2/quota_global.c
fs/ocfs2/quota_local.c
fs/ocfs2/super.c
fs/ocfs2/xattr.c
fs/proc/base.c
fs/proc/meminfo.c
fs/proc/page.c
fs/select.c
fs/sysfs/symlink.c
fs/ubifs/super.c
include/acpi/acpixf.h
include/acpi/actypes.h
include/acpi/platform/acgcc.h
include/acpi/platform/aclinux.h
include/asm-generic/atomic64.h [new file with mode: 0644]
include/asm-generic/kmap_types.h
include/drm/drm_pciids.h
include/drm/radeon_drm.h
include/drm/ttm/ttm_bo_api.h [new file with mode: 0644]
include/drm/ttm/ttm_bo_driver.h [new file with mode: 0644]
include/drm/ttm/ttm_memory.h [new file with mode: 0644]
include/drm/ttm/ttm_module.h [new file with mode: 0644]
include/drm/ttm/ttm_placement.h [new file with mode: 0644]
include/linux/bio.h
include/linux/blkdev.h
include/linux/bug.h
include/linux/c2port.h
include/linux/cpuset.h
include/linux/device.h
include/linux/eisa.h
include/linux/fb.h
include/linux/firewire.h [new file with mode: 0644]
include/linux/firmware-map.h
include/linux/firmware.h
include/linux/fs.h
include/linux/genhd.h
include/linux/gfp.h
include/linux/highmem.h
include/linux/hugetlb.h
include/linux/init.h
include/linux/init_task.h
include/linux/interrupt.h
include/linux/kernel.h
include/linux/kmemcheck.h [new file with mode: 0644]
include/linux/linux_logo.h
include/linux/lis3lv02d.h [new file with mode: 0644]
include/linux/major.h
include/linux/memcontrol.h
include/linux/mg_disk.h [new file with mode: 0644]
include/linux/miscdevice.h
include/linux/mm.h
include/linux/mm_types.h
include/linux/mmc/sdio_ids.h
include/linux/mmzone.h
include/linux/module.h
include/linux/nls.h
include/linux/nodemask.h
include/linux/page-flags.h
include/linux/pagemap.h
include/linux/pci.h
include/linux/pci_ids.h
include/linux/platform_device.h
include/linux/poll.h
include/linux/radix-tree.h
include/linux/ring_buffer.h
include/linux/rmap.h
include/linux/sched.h
include/linux/skbuff.h
include/linux/slab.h
include/linux/slab_def.h
include/linux/smp.h
include/linux/stacktrace.h
include/linux/swap.h
include/linux/syscalls.h
include/linux/timex.h
include/linux/tracepoint.h
include/linux/usb.h
include/linux/usb/audio.h
include/linux/usb/ch9.h
include/linux/usb/composite.h
include/linux/usb/langwell_otg.h [new file with mode: 0644]
include/linux/usb/langwell_udc.h [new file with mode: 0644]
include/linux/usb/otg.h
include/linux/usb/r8a66597.h [new file with mode: 0644]
include/linux/usb/serial.h
include/linux/utsname.h
include/linux/videodev2.h
include/linux/vlynq.h [new file with mode: 0644]
include/linux/vmstat.h
include/media/adv7343.h [new file with mode: 0644]
include/media/ir-kbd-i2c.h
include/media/soc_camera.h
include/media/tuner.h
include/media/v4l2-chip-ident.h
include/media/v4l2-device.h
include/media/v4l2-subdev.h
include/net/inet_sock.h
include/net/inet_timewait_sock.h
include/net/sock.h
include/video/s1d13xxxfb.h
init/Kconfig
init/do_mounts.c
init/main.c
kernel/Makefile
kernel/cpuset.c
kernel/fork.c
kernel/groups.c [new file with mode: 0644]
kernel/kfifo.c
kernel/kthread.c
kernel/module.c
kernel/power/process.c
kernel/printk.c
kernel/profile.c
kernel/signal.c
kernel/slow-work.c
kernel/softirq.c
kernel/sys.c
kernel/sysctl.c
kernel/trace/Kconfig
kernel/trace/ring_buffer.c
kernel/trace/trace.c
kernel/user.c
lib/Kconfig
lib/Kconfig.debug
lib/Kconfig.kmemcheck [new file with mode: 0644]
lib/Makefile
lib/atomic64.c [new file with mode: 0644]
lib/dec_and_lock.c
lib/genalloc.c
lib/hexdump.c
lib/kobject.c
lib/radix-tree.c
lib/rbtree.c
mm/Kconfig
mm/Kconfig.debug
mm/Makefile
mm/bounce.c
mm/fadvise.c
mm/filemap.c
mm/highmem.c
mm/hugetlb.c
mm/init-mm.c [new file with mode: 0644]
mm/internal.h
mm/kmemcheck.c [new file with mode: 0644]
mm/madvise.c
mm/memcontrol.c
mm/memory.c
mm/memory_hotplug.c
mm/mempolicy.c
mm/migrate.c
mm/mlock.c
mm/oom_kill.c
mm/page-writeback.c
mm/page_alloc.c
mm/page_io.c
mm/readahead.c
mm/rmap.c
mm/shmem.c
mm/slab.c
mm/slob.c
mm/slub.c
mm/swap_state.c
mm/swapfile.c
mm/truncate.c
mm/util.c
mm/vmscan.c
mm/vmstat.c
net/core/skbuff.c
net/core/sock.c
net/ipv4/inet_timewait_sock.c
net/iucv/af_iucv.c
net/iucv/iucv.c
net/rxrpc/ar-connection.c
net/rxrpc/ar-connevent.c
net/sunrpc/svc.c
samples/Kconfig
samples/firmware_class/firmware_sample_driver.c [deleted file]
samples/firmware_class/firmware_sample_firmware_class.c [deleted file]
scripts/get_maintainer.pl
scripts/gfp-translate [new file with mode: 0644]
scripts/pnmtologo.c
scripts/recordmcount.pl
scripts/tracing/draw_functrace.py
sound/drivers/pcsp/pcsp.h
sound/oss/pas2_pcm.c
sound/pci/ctxfi/ctatc.c
sound/pci/ctxfi/ctatc.h
sound/pci/ctxfi/cttimer.c
sound/pci/hda/patch_realtek.c
sound/pci/intel8x0.c
sound/soc/codecs/ssm2602.c
sound/soc/codecs/wm8903.c
sound/soc/pxa/magician.c
sound/soc/soc-core.c
sound/sound_core.c
sound/usb/usbquirks.h

index 7f5f218015feb8beed681fa7742caced8ac4c76f..08ff908aa7a239732fce68cc1b06e507626f216a 100644 (file)
       number of errors are printk'ed including a full stack trace.
     </para>
     <para>
-      The statistics are available via debugfs/debug_objects/stats.
+      The statistics are available via /sys/kernel/debug/debug_objects/stats.
       They provide information about the number of warnings and the
       number of successful fixups along with information about the
       usage of the internal tracking objects and the state of the
index 7ea231172c850db1a7eed7127d0bb8a036e56364..aa73e72fd793896cbb70fa85505d5f6a7b76d80a 100644 (file)
@@ -246,7 +246,8 @@ void print_ioacct(struct taskstats *t)
 
 int main(int argc, char *argv[])
 {
-       int c, rc, rep_len, aggr_len, len2, cmd_type;
+       int c, rc, rep_len, aggr_len, len2;
+       int cmd_type = TASKSTATS_CMD_ATTR_UNSPEC;
        __u16 id;
        __u32 mypid;
 
index 4ef245010457fc9301f21f6e78f2b1fc16c1d014..396bec3b74ed12ca1ddbfe980f9ffd4ca4d91308 100644 (file)
@@ -229,10 +229,10 @@ kernel.  It is the use of atomic counters to implement reference
 counting, and it works such that once the counter falls to zero it can
 be guaranteed that no other entity can be accessing the object:
 
-static void obj_list_add(struct obj *obj)
+static void obj_list_add(struct obj *obj, struct list_head *head)
 {
        obj->active = 1;
-       list_add(&obj->list);
+       list_add(&obj->list, head);
 }
 
 static void obj_list_del(struct obj *obj)
index cf1f8126991c00fe5f904631d0471821bf958515..1c407778c8b26213a69984e03a94d34a4fe16d82 100644 (file)
@@ -117,7 +117,7 @@ Using the pktcdvd debugfs interface
 
 To read pktcdvd device infos in human readable form, do:
 
-       # cat /debug/pktcdvd/pktcdvd[0-7]/info
+       # cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
 
 For a description of the debugfs interface look into the file:
 
index a7cbfff40d077047f76463377381b269b5d41fc4..a124f3126b0d1f4f495c982a03df6e12f743b87b 100644 (file)
@@ -162,3 +162,35 @@ device_remove_file(dev,&dev_attr_power);
 
 The file name will be 'power' with a mode of 0644 (-rw-r--r--).
 
+Word of warning:  While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created.  When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available.  If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time.  If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes.  Instead, it should
+probably use class_create() and class->dev_attrs to set up a list of
+desired attributes in the modules_init function, and then in the .probe()
+hook, and then use device_create() to create a new device as a child
+of the probed device.  The new device will generate a new uevent and
+properly advertise the new attributes to userspace.
+
+For example, if a driver wanted to add the following attributes:
+struct device_attribute mydriver_attribs[] = {
+       __ATTR(port_count, 0444, port_count_show),
+       __ATTR(serial_number, 0444, serial_number_show),
+       NULL
+};
+
+Then in the module init function is would do:
+       mydriver_class = class_create(THIS_MODULE, "my_attrs");
+       mydriver_class.dev_attr = mydriver_attribs;
+
+And assuming 'dev' is the struct device passed into the probe hook, the driver
+probe function would do something like:
+       create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");
index 2f21ecd4c205fefcefd870abe5c415b49a1b5253..a52adfc9a57fe4d7b8cfbbecfa525df6d91906e1 100644 (file)
@@ -112,7 +112,7 @@ sub tda10045 {
 
 sub tda10046 {
        my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
-       my $url = "http://technotrend-online.com/download/software/219/$sourcefile";
+       my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
        my $hash = "6a7e1e2f2644b162ff0502367553c72d";
        my $outfile = "dvb-fe-tda10046.fw";
        my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -129,8 +129,8 @@ sub tda10046 {
 }
 
 sub tda10046lifeview {
-    my $sourcefile = "Drv_2.11.02.zip";
-    my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+    my $sourcefile = "7%5Cdrv_2.11.02.zip";
+    my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
     my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
     my $outfile = "dvb-fe-tda10046.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -317,7 +317,7 @@ sub nxt2002 {
 
 sub nxt2004 {
     my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
-    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
+    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
     my $hash = "111cb885b1e009188346d72acfed024c";
     my $outfile = "dvb-fe-nxt2004.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
index 4bc374a14345da10f666d67745aa151231c10c92..079305640790ee0436ab7ae46e49624498c333ce 100644 (file)
@@ -29,16 +29,16 @@ o debugfs entries
 fault-inject-debugfs kernel module provides some debugfs entries for runtime
 configuration of fault-injection capabilities.
 
-- /debug/fail*/probability:
+- /sys/kernel/debug/fail*/probability:
 
        likelihood of failure injection, in percent.
        Format: <percent>
 
        Note that one-failure-per-hundred is a very high error rate
        for some testcases.  Consider setting probability=100 and configure
-       /debug/fail*/interval for such testcases.
+       /sys/kernel/debug/fail*/interval for such testcases.
 
-- /debug/fail*/interval:
+- /sys/kernel/debug/fail*/interval:
 
        specifies the interval between failures, for calls to
        should_fail() that pass all the other tests.
@@ -46,18 +46,18 @@ configuration of fault-injection capabilities.
        Note that if you enable this, by setting interval>1, you will
        probably want to set probability=100.
 
-- /debug/fail*/times:
+- /sys/kernel/debug/fail*/times:
 
        specifies how many times failures may happen at most.
        A value of -1 means "no limit".
 
-- /debug/fail*/space:
+- /sys/kernel/debug/fail*/space:
 
        specifies an initial resource "budget", decremented by "size"
        on each call to should_fail(,size).  Failure injection is
        suppressed until "space" reaches zero.
 
-- /debug/fail*/verbose
+- /sys/kernel/debug/fail*/verbose
 
        Format: { 0 | 1 | 2 }
        specifies the verbosity of the messages when failure is
@@ -65,17 +65,17 @@ configuration of fault-injection capabilities.
        log line per failure; '2' will print a call trace too -- useful
        to debug the problems revealed by fault injection.
 
-- /debug/fail*/task-filter:
+- /sys/kernel/debug/fail*/task-filter:
 
        Format: { 'Y' | 'N' }
        A value of 'N' disables filtering by process (default).
        Any positive value limits failures to only processes indicated by
        /proc/<pid>/make-it-fail==1.
 
-- /debug/fail*/require-start:
-- /debug/fail*/require-end:
-- /debug/fail*/reject-start:
-- /debug/fail*/reject-end:
+- /sys/kernel/debug/fail*/require-start:
+- /sys/kernel/debug/fail*/require-end:
+- /sys/kernel/debug/fail*/reject-start:
+- /sys/kernel/debug/fail*/reject-end:
 
        specifies the range of virtual addresses tested during
        stacktrace walking.  Failure is injected only if some caller
@@ -84,26 +84,26 @@ configuration of fault-injection capabilities.
        Default required range is [0,ULONG_MAX) (whole of virtual address space).
        Default rejected range is [0,0).
 
-- /debug/fail*/stacktrace-depth:
+- /sys/kernel/debug/fail*/stacktrace-depth:
 
        specifies the maximum stacktrace depth walked during search
        for a caller within [require-start,require-end) OR
        [reject-start,reject-end).
 
-- /debug/fail_page_alloc/ignore-gfp-highmem:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
 
        Format: { 'Y' | 'N' }
        default is 'N', setting it to 'Y' won't inject failures into
        highmem/user allocations.
 
-- /debug/failslab/ignore-gfp-wait:
-- /debug/fail_page_alloc/ignore-gfp-wait:
+- /sys/kernel/debug/failslab/ignore-gfp-wait:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
 
        Format: { 'Y' | 'N' }
        default is 'N', setting it to 'Y' will inject failures
        only into non-sleep allocations (GFP_ATOMIC allocations).
 
-- /debug/fail_page_alloc/min-order:
+- /sys/kernel/debug/fail_page_alloc/min-order:
 
        specifies the minimum page allocation order to be injected
        failures.
@@ -166,13 +166,13 @@ o Inject slab allocation failures into module init/exit code
 #!/bin/bash
 
 FAILTYPE=failslab
-echo Y > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
+echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
 
 faulty_system()
 {
@@ -217,20 +217,20 @@ then
        exit 1
 fi
 
-cat /sys/module/$module/sections/.text > /debug/$FAILTYPE/require-start
-cat /sys/module/$module/sections/.data > /debug/$FAILTYPE/require-end
+cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
 
-echo N > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
-echo 1 > /debug/$FAILTYPE/ignore-gfp-highmem
-echo 10 > /debug/$FAILTYPE/stacktrace-depth
+echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
 
-trap "echo 0 > /debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
 
 echo "Injecting errors into the module $module... (interrupt to stop)"
 sleep 1000000
index ee277dd204b0f575165b02f0dfc1fcb27c8d0bf8..950d5a658cb33860e05abaf2673b19e12482d388 100644 (file)
@@ -95,7 +95,7 @@ There is no way to change the vesafb video mode and/or timings after
 booting linux.  If you are not happy with the 60 Hz refresh rate, you
 have these options:
 
- * configure and load the DOS-Tools for your the graphics board (if
+ * configure and load the DOS-Tools for the graphics board (if
    available) and boot linux with loadlin.
  * use a native driver (matroxfb/atyfb) instead if vesafb.  If none
    is available, write a new one!
index cd8717a362712fbb537bf562eaa95b0be778dd3b..ebff3c10a07fc124b865f815de5b38d65f38d1fa 100644 (file)
@@ -1003,11 +1003,13 @@ CHAPTER 3: PER-PROCESS PARAMETERS
 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
 ------------------------------------------------------
 
-This file can be used to adjust the score used to select which processes
-should be killed in an  out-of-memory  situation.  Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer.  Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
+This file can be used to adjust the score used to select which processes should
+be killed in an out-of-memory situation.  The oom_adj value is a characteristic
+of the task's mm, so all threads that share an mm with pid will have the same
+oom_adj value.  A high value will increase the likelihood of this process being
+killed by the oom-killer.  Valid values are in the range -16 to +15 as
+explained below and a special value of -17, which disables oom-killing
+altogether for threads sharing pid's mm.
 
 The process to be killed in an out-of-memory situation is selected among all others
 based on its badness score. This value equals the original memory size of the process
@@ -1021,6 +1023,9 @@ the parent's score if they do not share the same memory. Thus forking servers
 are the prime candidates to be killed. Having only one 'hungry' child will make
 parent less preferable than the child.
 
+/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
+oom-killing already.
+
 /proc/<pid>/oom_score shows process' current badness score.
 
 The following heuristics are then applied:
index 5147be5e13cd6376c9dac99cad8ffc186a201ab1..b58b84b50fa21944ccb98b87f5a2519f34a01705 100644 (file)
@@ -132,6 +132,11 @@ rodir            -- FAT has the ATTR_RO (read-only) attribute. On Windows,
                 If you want to use ATTR_RO as read-only flag even for
                 the directory, set this option.
 
+errors=panic|continue|remount-ro
+             -- specify FAT behavior on critical errors: panic, continue
+                without doing anything or remount the partition in
+                read-only mode (default behavior).
+
 <bool>: 0,1,yes,no,true,false
 
 TODO
index c3480aa66ba8048bf46483544ed6fb3ebb7151eb..7eceaff63f5ffb8f45748d0cb1f46b864652b69a 100644 (file)
@@ -77,7 +77,8 @@
    seconds for the whole load operation.
 
  - request_firmware_nowait() is also provided for convenience in
-   non-user contexts.
+   user contexts to request firmware asynchronously, but can't be called
+   in atomic contexts.
 
 
  about in-kernel persistence:
index a8321267b5b61901757c15f347c2a753ebbd016a..bee4c30bc1e2a82caa2421c9504e031ff1658c73 100644 (file)
@@ -2,14 +2,18 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
-  * Fintek F71882FG and F71883FG
-    Prefix: 'f71882fg'
+  * Fintek F71858FG
+    Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
   * Fintek F71862FG and F71863FG
     Prefix: 'f71862fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71882FG and F71883FG
+    Prefix: 'f71882fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -66,13 +70,13 @@ printed when loading the driver.
 
 Three different fan control modes are supported; the mode number is written
 to the pwm#_enable file. Note that not all modes are supported on all
-chips, and some modes may only be available in RPM / PWM mode on the F8000.
+chips, and some modes may only be available in RPM / PWM mode.
 Writing an unsupported mode will result in an invalid parameter error.
 
 * 1: Manual mode
   You ask for a specific PWM duty cycle / DC voltage or a specific % of
   fan#_full_speed by writing to the pwm# file. This mode is only
-  available on the F8000 if the fan channel is in RPM mode.
+  available on the F71858FG / F8000 if the fan channel is in RPM mode.
 
 * 2: Normal auto mode
   You can define a number of temperature/fan speed trip points, which % the
index e98bdfea3467f679411f86d8f82be7ea421da491..1e0d59e000b475cafe418db3fd44fba6f08b3122 100644 (file)
@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available
index 004ee161721e9b3bd1aa213c174a594174b187c8..dcbd502c8792b4e786507bc2023860c716d8fd8b 100644 (file)
@@ -70,6 +70,7 @@ are interpreted as 0! For more on how written strings are interpreted see the
 [0-*]  denotes any positive number starting from 0
 [1-*]  denotes any positive number starting from 1
 RO     read only value
+WO     write only value
 RW     read/write value
 
 Read/write values may be read-only for some chips, depending on the
@@ -295,6 +296,24 @@ temp[1-*]_label    Suggested temperature channel label.
                user-space.
                RO
 
+temp[1-*]_lowest
+               Historical minimum temperature
+               Unit: millidegree Celsius
+               RO
+
+temp[1-*]_highest
+               Historical maximum temperature
+               Unit: millidegree Celsius
+               RO
+
+temp[1-*]_reset_history
+               Reset temp_lowest and temp_highest
+               WO
+
+temp_reset_history
+               Reset temp_lowest and temp_highest for all sensors
+               WO
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
new file mode 100644 (file)
index 0000000..9fc4472
--- /dev/null
@@ -0,0 +1,42 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+        Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401 and
+TMP411 chips. These chips implements one remote and one local
+temperature sensor. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 chip is compatible with TMP401. It provides some additional
+features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.
index b6eb59384bb39c1b67d0c99a1ade601269a64d05..02b74899edaf42e5c1a266399aeb51c890fc5c5c 100644 (file)
@@ -12,6 +12,10 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
         http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83627DHG-P
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -28,8 +32,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG and W83667HG super I/O chips. We will refer to them collectively
-as Winbond chips.
+W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
+collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -135,3 +139,6 @@ done in the driver for all register addresses.
 The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
 the ICH8 southbridge gets that data via PECI from the DHG, so that the
 southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.
index 22efedf60c872869e5230eb5ccf66c166634e22c..2e758b0e94564042d14d1d763d6a11fc998c181d 100644 (file)
@@ -19,6 +19,9 @@ Supported adapters:
   * VIA Technologies, Inc. VX800/VX820
     Datasheet: available on http://linux.via.com.tw
 
+  * VIA Technologies, Inc. VX855/VX875
+    Datasheet: Availability unknown
+
 Authors:
        Kyösti Mälkki <kmalkki@cc.hut.fi>,
        Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
  device 1106:3287   (VT8251)
  device 1106:8324   (CX700)
  device 1106:8353   (VX800/VX820)
+ device 1106:8409   (VX855/VX875)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
index ad38006307725ff2a563d9e86e78230df0879e22..5578248c18a46837e6c88b0b1779cb2e08b436c3 100644 (file)
@@ -546,6 +546,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        console=brl,ttyS0
                For now, only VisioBraille is supported.
 
+       consoleblank=   [KNL] The console blank (screen saver) timeout in
+                       seconds. Defaults to 10*60 = 10mins. A value of 0
+                       disables the blank timer.
+
        coredump_filter=
                        [KNL] Change the default value for
                        /proc/<pid>/coredump_filter.
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
new file mode 100644 (file)
index 0000000..3630446
--- /dev/null
@@ -0,0 +1,773 @@
+GETTING STARTED WITH KMEMCHECK
+==============================
+
+Vegard Nossum <vegardno@ifi.uio.no>
+
+
+Contents
+========
+0. Introduction
+1. Downloading
+2. Configuring and compiling
+3. How to use
+3.1. Booting
+3.2. Run-time enable/disable
+3.3. Debugging
+3.4. Annotating false positives
+4. Reporting errors
+5. Technical description
+
+
+0. Introduction
+===============
+
+kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
+is a dynamic checker that detects and warns about some uses of uninitialized
+memory.
+
+Userspace programmers might be familiar with Valgrind's memcheck. The main
+difference between memcheck and kmemcheck is that memcheck works for userspace
+programs only, and kmemcheck works for the kernel only. The implementations
+are of course vastly different. Because of this, kmemcheck is not as accurate
+as memcheck, but it turns out to be good enough in practice to discover real
+programmer errors that the compiler is not able to find through static
+analysis.
+
+Enabling kmemcheck on a kernel will probably slow it down to the extent that
+the machine will not be usable for normal workloads such as e.g. an
+interactive desktop. kmemcheck will also cause the kernel to use about twice
+as much memory as normal. For this reason, kmemcheck is strictly a debugging
+feature.
+
+
+1. Downloading
+==============
+
+kmemcheck can only be downloaded using git. If you want to write patches
+against the current code, you should use the kmemcheck development branch of
+the tip tree. It is also possible to use the linux-next tree, which also
+includes the latest version of kmemcheck.
+
+Assuming that you've already cloned the linux-2.6.git repository, all you
+have to do is add the -tip tree as a remote, like this:
+
+       $ git remote add tip git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
+
+To actually download the tree, fetch the remote:
+
+       $ git fetch tip
+
+And to check out a new local branch with the kmemcheck code:
+
+       $ git checkout -b kmemcheck tip/kmemcheck
+
+General instructions for the -tip tree can be found here:
+http://people.redhat.com/mingo/tip.git/readme.txt
+
+
+2. Configuring and compiling
+============================
+
+kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
+configuration variables must have specific settings in order for the kmemcheck
+menu to even appear in "menuconfig". These are:
+
+  o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
+
+       This option is located under "General setup" / "Optimize for size".
+
+       Without this, gcc will use certain optimizations that usually lead to
+       false positive warnings from kmemcheck. An example of this is a 16-bit
+       field in a struct, where gcc may load 32 bits, then discard the upper
+       16 bits. kmemcheck sees only the 32-bit load, and may trigger a
+       warning for the upper 16 bits (if they're uninitialized).
+
+  o CONFIG_SLAB=y or CONFIG_SLUB=y
+
+       This option is located under "General setup" / "Choose SLAB
+       allocator".
+
+  o CONFIG_FUNCTION_TRACER=n
+
+       This option is located under "Kernel hacking" / "Tracers" / "Kernel
+       Function Tracer"
+
+       When function tracing is compiled in, gcc emits a call to another
+       function at the beginning of every function. This means that when the
+       page fault handler is called, the ftrace framework will be called
+       before kmemcheck has had a chance to handle the fault. If ftrace then
+       modifies memory that was tracked by kmemcheck, the result is an
+       endless recursive page fault.
+
+  o CONFIG_DEBUG_PAGEALLOC=n
+
+       This option is located under "Kernel hacking" / "Debug page memory
+       allocations".
+
+In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
+located under "Kernel hacking". With this, you will be able to get line number
+information from the kmemcheck warnings, which is extremely valuable in
+debugging a problem. This option is not mandatory, however, because it slows
+down the compilation process and produces a much bigger kernel image.
+
+Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck:
+trap use of uninitialized memory"). Here follows a description of the
+kmemcheck configuration variables:
+
+  o CONFIG_KMEMCHECK
+
+       This must be enabled in order to use kmemcheck at all...
+
+  o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
+
+       This option controls the status of kmemcheck at boot-time. "Enabled"
+       will enable kmemcheck right from the start, "disabled" will boot the
+       kernel as normal (but with the kmemcheck code compiled in, so it can
+       be enabled at run-time after the kernel has booted), and "one-shot" is
+       a special mode which will turn kmemcheck off automatically after
+       detecting the first use of uninitialized memory.
+
+       If you are using kmemcheck to actively debug a problem, then you
+       probably want to choose "enabled" here.
+
+       The one-shot mode is mostly useful in automated test setups because it
+       can prevent floods of warnings and increase the chances of the machine
+       surviving in case something is really wrong. In other cases, the one-
+       shot mode could actually be counter-productive because it would turn
+       itself off at the very first error -- in the case of a false positive
+       too -- and this would come in the way of debugging the specific
+       problem you were interested in.
+
+       If you would like to use your kernel as normal, but with a chance to
+       enable kmemcheck in case of some problem, it might be a good idea to
+       choose "disabled" here. When kmemcheck is disabled, most of the run-
+       time overhead is not incurred, and the kernel will be almost as fast
+       as normal.
+
+  o CONFIG_KMEMCHECK_QUEUE_SIZE
+
+       Select the maximum number of error reports to store in an internal
+       (fixed-size) buffer. Since errors can occur virtually anywhere and in
+       any context, we need a temporary storage area which is guaranteed not
+       to generate any other page faults when accessed. The queue will be
+       emptied as soon as a tasklet may be scheduled. If the queue is full,
+       new error reports will be lost.
+
+       The default value of 64 is probably fine. If some code produces more
+       than 64 errors within an irqs-off section, then the code is likely to
+       produce many, many more, too, and these additional reports seldom give
+       any more information (the first report is usually the most valuable
+       anyway).
+
+       This number might have to be adjusted if you are not using serial
+       console or similar to capture the kernel log. If you are using the
+       "dmesg" command to save the log, then getting a lot of kmemcheck
+       warnings might overflow the kernel log itself, and the earlier reports
+       will get lost in that way instead. Try setting this to 10 or so on
+       such a setup.
+
+  o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
+
+       Select the number of shadow bytes to save along with each entry of the
+       error-report queue. These bytes indicate what parts of an allocation
+       are initialized, uninitialized, etc. and will be displayed when an
+       error is detected to help the debugging of a particular problem.
+
+       The number entered here is actually the logarithm of the number of
+       bytes that will be saved. So if you pick for example 5 here, kmemcheck
+       will save 2^5 = 32 bytes.
+
+       The default value should be fine for debugging most problems. It also
+       fits nicely within 80 columns.
+
+  o CONFIG_KMEMCHECK_PARTIAL_OK
+
+       This option (when enabled) works around certain GCC optimizations that
+       produce 32-bit reads from 16-bit variables where the upper 16 bits are
+       thrown away afterwards.
+
+       The default value (enabled) is recommended. This may of course hide
+       some real errors, but disabling it would probably produce a lot of
+       false positives.
+
+  o CONFIG_KMEMCHECK_BITOPS_OK
+
+       This option silences warnings that would be generated for bit-field
+       accesses where not all the bits are initialized at the same time. This
+       may also hide some real bugs.
+
+       This option is probably obsolete, or it should be replaced with
+       the kmemcheck-/bitfield-annotations for the code in question. The
+       default value is therefore fine.
+
+Now compile the kernel as usual.
+
+
+3. How to use
+=============
+
+3.1. Booting
+============
+
+First some information about the comma