--- /dev/null
+What: /sys/kernel/slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The /sys/kernel/slab directory contains a snapshot of the
+ internal state of the SLUB allocator for each cache. Certain
+ files may be modified to change the behavior of the cache (and
+ any cache it aliases, if any).
+Users: kernel memory tuning tools
+
+What: /sys/kernel/slab/cache/aliases
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The aliases file is read-only and specifies how many caches
+ have merged into this cache.
+
+What: /sys/kernel/slab/cache/align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The align file is read-only and specifies the cache's object
+ alignment in bytes.
+
+What: /sys/kernel/slab/cache/alloc_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_calls file is read-only and lists the kernel code
+ locations from which allocations for this cache were performed.
+ The alloc_calls file only contains information if debugging is
+ enabled for that cache (see Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/alloc_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_fastpath file is read-only and specifies how many
+ objects have been allocated using the fast path.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_from_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_from_partial file is read-only and specifies how
+ many times a cpu slab has been full and it has been refilled
+ by using a slab from the list of partially used slabs.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_refill
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_refill file is read-only and specifies how many
+ times the per-cpu freelist was empty but there were objects
+ available as the result of remote cpu frees.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slab file is read-only and specifies how many times
+ a new slab had to be allocated from the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slowpath file is read-only and specifies how many
+ objects have been allocated using the slow path because of a
+ refill or allocation from a partial or new slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/cache_dma
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cache_dma file is read-only and specifies whether objects
+ are from ZONE_DMA.
+ Available when CONFIG_ZONE_DMA is enabled.
+
+What: /sys/kernel/slab/cache/cpu_slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cpu_slabs file is read-only and displays how many cpu slabs
+ are active and their NUMA locality.
+
+What: /sys/kernel/slab/cache/cpuslab_flush
+Date: April 2009
+KernelVersion: 2.6.31
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file cpuslab_flush is read-only and specifies how many
+ times a cache's cpu slabs have been flushed as the result of
+ destroying or shrinking a cache, a cpu going offline, or as
+ the result of forcing an allocation from a certain node.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/ctor
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The ctor file is read-only and specifies the cache's object
+ constructor function, which is invoked for each object when a
+ new slab is allocated.
+
+What: /sys/kernel/slab/cache/deactivate_empty
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_empty is read-only and specifies how many
+ times an empty cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_full
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_full is read-only and specifies how many
+ times a full cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_remote_frees
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_remote_frees is read-only and specifies how
+ many times a cpu slab has been deactivated and contained free
+ objects that were freed remotely.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_head
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_head is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ head of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_tail
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_tail is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ tail of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/destroy_by_rcu
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The destroy_by_rcu file is read-only and specifies whether
+ slabs (not objects) are freed by rcu.
+
+What: /sys/kernel/slab/cache/free_add_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_add_partial is read-only and specifies how many
+ times an object has been freed in a full slab so that it had to
+ added to its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_calls file is read-only and lists the locations of
+ object frees if slab debugging is enabled (see
+ Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/free_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_fastpath file is read-only and specifies how many
+ objects have been freed using the fast path because it was an
+ object from the cpu slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_frozen
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_frozen file is read-only and specifies how many
+ objects have been freed to a frozen slab (i.e. a remote cpu
+ slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_remove_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_remove_partial is read-only and specifies how
+ many times an object has been freed to a now-empty slab so
+ that it had to be removed from its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slab file is read-only and specifies how many times an
+ empty slab has been freed back to the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slowpath file is read-only and specifies how many
+ objects have been freed using the slow path (i.e. to a full or
+ partial slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/hwcache_align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The hwcache_align file is read-only and specifies whether
+ objects are aligned on cachelines.
+
+What: /sys/kernel/slab/cache/min_partial
+Date: February 2009
+KernelVersion: 2.6.30
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ David Rientjes <rientjes@google.com>
+Description:
+ The min_partial file specifies how many empty slabs shall
+ remain on a node's partial list to avoid the overhead of
+ allocating new slabs. Such slabs may be reclaimed by utilizing
+ the shrink file.
+
+What: /sys/kernel/slab/cache/object_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The object_size file is read-only and specifies the cache's
+ object size.
+
+What: /sys/kernel/slab/cache/objects
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects file is read-only and displays how many objects are
+ active and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/objects_partial
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects_partial file is read-only and displays how many
+ objects are on partial slabs and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/objs_per_slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file objs_per_slab is read-only and specifies how many
+ objects may be allocated from a single slab of the order
+ specified in /sys/kernel/slab/cache/order.
+
+What: /sys/kernel/slab/cache/order
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The order file specifies the page order at which new slabs are
+ allocated. It is writable and can be changed to increase the
+ number of objects per slab. If a slab cannot be allocated
+ because of fragmentation, SLUB will retry with the minimum order
+ possible depending on its characteristics.
+
+What: /sys/kernel/slab/cache/order_fallback
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file order_fallback is read-only and specifies how many
+ times an allocation of a new slab has not been possible at the
+ cache's order and instead fallen back to its minimum possible
+ order.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/partial
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The partial file is read-only and displays how long many
+ partial slabs there are and how long each node's list is.
+
+What: /sys/kernel/slab/cache/poison
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The poison file specifies whether objects should be poisoned
+ when a new slab is allocated.
+
+What: /sys/kernel/slab/cache/reclaim_account
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The reclaim_account file specifies whether the cache's objects
+ are reclaimable (and grouped by their mobility).
+
+What: /sys/kernel/slab/cache/red_zone
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The red_zone file specifies whether the cache's objects are red
+ zoned.
+
+What: /sys/kernel/slab/cache/remote_node_defrag_ratio
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file remote_node_defrag_ratio specifies the percentage of
+ times SLUB will attempt to refill the cpu slab with a partial
+ slab from a remote node as opposed to allocating a new slab on
+ the local node. This reduces the amount of wasted memory over
+ the entire system but can be expensive.
+ Available when CONFIG_NUMA is enabled.
+
+What: /sys/kernel/slab/cache/sanity_checks
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The sanity_checks file specifies whether expensive checks
+ should be performed on free and, at minimum, enables double free
+ checks. Caches that enable sanity_checks cannot be merged with
+ caches that do not.
+
+What: /sys/kernel/slab/cache/shrink
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The shrink file is written when memory should be reclaimed from
+ a cache. Empty partial slabs are freed and the partial list is
+ sorted so the slabs with the fewest available objects are used
+ first.
+
+What: /sys/kernel/slab/cache/slab_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slab_size file is read-only and specifies the object size
+ with metadata (debugging information and alignment) in bytes.
+
+What: /sys/kernel/slab/cache/slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slabs file is read-only and displays how long many slabs
+ there are (both cpu and partial) and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/store_user
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The store_user file specifies whether the location of
+ allocation or free should be tracked for a cache.
+
+What: /sys/kernel/slab/cache/total_objects
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The total_objects file is read-only and displays how many total
+ objects a cache has and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/trace
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The trace file specifies whether object allocations and frees
+ should be traced.
+
+What: /sys/kernel/slab/cache/validate
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ Writing to the validate file causes SLUB to traverse all of its
+ cache's objects and check the validity of metadata.
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
- Hugh Dickins <hugh@veritas.com>, 4 June 2007
+ Hugh Dickins, 4 June 2007
Unit: revolution/min (RPM)
RW
+fan[1-*]_max Fan maximum value
+ Unit: revolution/min (RPM)
+ Only rarely supported by the hardware.
+ RW
+
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
+fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
Event Semantics
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
ABS_MT_ORIENTATION
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
ABS_MT_POSITION_X
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
Finger Tracking
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
Notes
-----
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
+ noxsave [BUGS=X86] Disables x86 extended register state save
+ and restore using xsave. The kernel will fallback to
+ enabling legacy floating-point and sse state.
+
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
+ 5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
auto BIOS setup (default)
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
-M: thomas.dahlmann@amd.com
+M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
P: Russell King
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
P: Russell King
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Bryan Wu
-M: cooloney@kernel.org
+P: Mike Frysinger
+M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Bryan Wu
-M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
M: linux@arm.linux.org.uk
F: include/linux/clk.h
+CISCO FCOE HBA DRIVER
+P: Abhijeet Joglekar
+M: abjoglek@cisco.com
+P: Joe Eykholt
+M: jeykholt@cisco.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+
CODA FILE SYSTEM
P: Jan Harkes
M: jaharkes@cs.cmu.edu
EDAC-E752X
P: Mark Gross
-P: Doug Thompson
M: mark.gross@intel.com
+P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
S: Maintained
F: drivers/mmc/host/tmio_mmc.*
+TMPFS (SHMEM FILESYSTEM)
+P: Hugh Dickins
+M: hugh.dickins@tiscali.co.uk
+L: linux-mm@kvack.org
+S: Maintained
+F: include/linux/shmem_fs.h
+F: mm/shmem.c
+
TPM DEVICE DRIVER
P: Debora Velarde
M: debora@linux.vnet.ibm.com
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc6
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc8
+NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
include $(srctree)/arch/$(SRCARCH)/Makefile
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
This enables support for the Cirrus EP93xx series of CPUs.
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default y
- depends on FLATMEM
+ default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
}
#ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
- unsigned long map = *cpus_addr(cpumask);
+ unsigned long map = *cpus_addr(*mask);
/* this always happens on GIC0 */
writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
.align 3; \
.long 9999b,9001f; \
.previous
+
+/*
+ * SMP data memory barrier
+ */
+ .macro smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+ dmb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
+#endif
+ .endm
: "cc");
}
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_add\n"
+"1: ldrex %0, [%2]\n"
+" add %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_sub\n"
+"1: ldrex %0, [%2]\n"
+" sub %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
{
unsigned long oldval, res;
+ smp_mb();
+
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
: "cc");
} while (res);
+ smp_mb();
+
return oldval;
}
return val;
}
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
return val;
}
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i, v) (void) atomic_add_return(i, v)
-#define atomic_inc(v) (void) atomic_add_return(1, v)
-#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
-#define atomic_dec(v) (void) atomic_sub_return(1, v)
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__after_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
#endif
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-/* An odd number of words will be pushed after this alignment, so
- deliberately misalign the value. */
-#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
#endif
#endif
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
#include <asm-generic/page.h>
#endif
/*
* Raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
/*
* Broadcast a clock event to other CPUs.
*/
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
/*
* Boot a secondary CPU, and assign it the specified idle task.
extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* Local timer interrupt handling function (can be IPI'ed).
unsigned int tmp;
#endif
+ smp_mb();
+
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
__bad_xchg(ptr, size), ret = 0;
break;
}
+ smp_mb();
return ret;
}
#include <asm-generic/cmpxchg-local.h>
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
#include <asm-generic/cmpxchg.h>
#endif
+#else /* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long oldval, res;
+
+ switch (size) {
+#ifdef CONFIG_CPU_32v6K
+ case 1:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexb %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexbeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ case 2:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexh %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexheq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+#endif /* CONFIG_CPU_32v6K */
+ case 4:
+ do {
+ asm volatile("@ __cmpxchg4\n"
+ " ldrex %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ default:
+ __bad_cmpxchg(ptr, size);
+ oldval = 0;
+ }
+
+ return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ smp_mb();
+ ret = __cmpxchg(ptr, old, new, size);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+#ifndef CONFIG_CPU_32v6K
+ case 1:
+ case 2:
+ ret = __cmpxchg_local_generic(ptr, old, new, size);
+ break;
+#endif /* !CONFIG_CPU_32v6K */
+ default:
+ ret = __cmpxchg(ptr, old, new, size);
+ }
+
+ return ret;
+}
+
+#define cmpxchg_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ register unsigned long long oldval asm("r0");
+ register unsigned long long __old asm("r2") = old;
+ register unsigned long long __new asm("r4") = new;
+ unsigned long res;
+
+ do {
+ asm volatile(
+ " @ __cmpxchg8\n"
+ " ldrexd %1, %H1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " teqeq %H1, %H3\n"
+ " strexdeq %0, %4, %H4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (__old), "r" (__new)
+ : "memory", "cc");
+ } while (res);
+
+ return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ unsigned long long ret;
+
+ smp_mb();
+ ret = __cmpxchg64(ptr, old, new);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg64(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#else /* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* CONFIG_CPU_32v6K */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+ /*
+ * If we have support for OABI programs, we can never allow NX
+ * support - our signal syscall restart mechanism relies upon
+ * being able to execute code placed on the user stack.
+ */
+ return 1;
+#else
return 0;
+#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
*/
__kuser_memory_barrier: @ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
usr_ret lr
.align 5
per_cpu(cpu_data, cpu).idle = current;
}
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
{
unsigned long flags;
unsigned int cpu;
local_irq_save(flags);
- for_each_cpu_mask(cpu, callmap) {
+ for_each_cpu(cpu, mask) {
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
spin_lock(&ipi->lock);
/*
* Call the platform specific cross-CPU call function.
*/
- smp_cross_call(callmap);
+ smp_cross_call(mask);
local_irq_restore(flags);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+ send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
void show_ipi_list(struct seq_file *p)
void smp_send_reschedule(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_send_timer(void)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_TIMER);
}
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_CPU_STOP);
+ send_ipi_message(&mask, IPI_CPU_STOP);
}
/*
return -EINVAL;
}
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+ const struct cpumask *mask)
{
- int ret = 0;
-
preempt_disable();
- ret = smp_call_function_mask(mask, func, info, wait);
- if (cpu_isset(smp_processor_id(), mask))
+ smp_call_function_many(mask, func, info, wait);
+ if (cpumask_test_cpu(smp_processor_id(), mask))
func(info);
preempt_enable();
-
- return ret;
}
/**********************************************************************/
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t mask = mm->cpu_vm_mask;
-
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_page(unsigned long kaddr)
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
+ smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
+ smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr
#include <asm/div64.h>
#include <mach/hardware.h>
+
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+
struct clk {
unsigned long rate;
int users;
+ int sw_locked;
u32 enable_reg;
u32 enable_mask;
+
+ unsigned long (*get_rate)(struct clk *clk);
};
-static struct clk clk_uart = {
- .rate = 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart2 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart3 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart),
- INIT_CK("apb:uart2", NULL, &clk_uart),
- INIT_CK("apb:uart3", NULL, &clk_uart),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
+static unsigned long get_uart_rate(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+ if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+ return EP93XX_EXT_CLK_RATE;
+ else
+ return EP93XX_EXT_CLK_RATE / 2;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
unsigned long long rate;
int i;
- rate = 14745600;
+ rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = 14745600;
+ clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = 14745600;
+ clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
/*
* Memory Map definitions
*/
-/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x20000000
+# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
.rate = 14745600,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource kirkwood_i2c_resources[] = {
{
- .name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_SATA1_PRESENTn,
- MPP23_SATA0_PRESENTn,
0
};
/* IO_START and IO_BASE are defined in hardware.h */
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
/* Define the interface to the SYS_CLOCK */
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x1 << 13)
+#define MFP_DRIVE_MEDIUM (0x2 << 13)
+#define MFP_DRIVE_FAST (0x3 << 13)
+
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ * - the reserved bit differs between pxa168 and pxa910, and the
+ * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x8 << 13)
-
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM
.set_mode = timer_set_mode,
};
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource mv78xx0_i2c_0_resources[] = {
{
- .name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
static struct resource mv78xx0_i2c_1_resources[] = {
{
- .name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,
.con_id = n, \
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
/* It's unlikely that any driver wants one of them directly:
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
- CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
- CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
+ CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
+ CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
- CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
+ CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
- CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
- CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
- CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
- CLK(NULL, "dss_ick", &dss_ick, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
+ CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
+ CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
+ CLK("omapfb", "ick", &dss_ick, CK_343X),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
- platform_device_register(&omap2_mcspi3);
+ if (cpu_is_omap2430() || cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi3);
#endif
#ifdef CONFIG_ARCH_OMAP3
- platform_device_register(&omap2_mcspi4);
+ if (cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi4);
#endif
}
/* PM_PREPWSTST_CAM specific bits */
/* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4
/* RM_RSTST_PER specific bits */
unsigned sysclk_ps;
int status;
- if (!refclk_psec || sysclk_ps == 0)
+ if (!refclk_psec || fclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource orion5x_i2c_resources[] = {
{
- .name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,
}
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+ .gpio_pullup = -1,
+ .gpio_vbus = -1,
+};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
- GPIO1_GPIO, /* pcap interrupt */
- GPIO4_GPIO, /* WDI_AP */
- GPIO55_GPIO, /* SYS_RESTART */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
+ GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
+ GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO12_GPIO,
+ GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
- GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO57_GPIO, /* AP_RDY */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
- GPIO82_GPIO, /* RESET */
- GPIO99_GPIO, /* TC_MM_EN */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
+ GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO15_GPIO,
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
- GPIO10_GPIO,
+ GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO96_GPIO, /* AP_RDY */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO116_GPIO, /* RESET */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
*/
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
{ /* UCAM sensor board */
- .type = "max1238",
+ .type = "max1239",
.addr = 0x35,
}, { /* ITS400 Sensor board only */
.type = "max1363",
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
*/
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
+ saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
+ PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
if (cpu_is_pxa27x())
pxa27x_mfp_init();
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
static int reset_gpio = -1;
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
{
int rc;
}
if (output)
- rc = gpio_direction_output(gpio, 0);
+ rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
+static void spitz_ohci_exit(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
static void __init common_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
- init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
+#include <mach/regs-uart.h>
#include <mach/viper.h>
#include <asm/setup.h>
{
u32 val;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- /*
- * The dummy clock device has to be registered before the main device
- * so that the latter will broadcast the clock events
- */
- local_timer_setup();
-#endif
-
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
/*
* We use IRQ1 as the IPI
*/
-static inline void smp_cross_call(cpumask_t callmap)
-{
- gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
{
+ gic_raise_softirq(mask, 1);
}
#endif
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 200;
+ clk->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ clk->rating = 400;
clk->mult = 1;
clk->set_mode = dummy_timer_set_mode;
clk->broadcast = smp_timer_broadcast;
{
trace_hardirqs_off();
- /*
- * the primary core may have used a "cross call" soft interrupt
- * to get this processor out of WFI in the BootMonitor - make
- * sure that we are no longer being sent this soft interrupt
- */
- smp_cross_call_done(cpumask_of_cpu(cpu));
-
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* Use smp_cross_call() for this, since there's little
* point duplicating the code here
*/
- smp_cross_call(cpumask_of_cpu(cpu));
+ smp_cross_call(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
if (max_cpus > ncores)
max_cpus = ncores;
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/*
- * Enable the local timer for primary CPU. If the device is
- * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
- * realview_timer_init
+ * Enable the local timer or broadcast device for the boot CPU.
*/
local_timer_setup();
#endif
s3c_device_nand.dev.platform_data = &bast_nand_info;
- s3c_i2c0_set_platdata(&bast_i2c_info);
-
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
sysdev_class_register(&bast_pm_sysclass);
sysdev_register(&bast_pm_sysdev);
+ s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
.rate = 24000000,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "dev:f1",
.clk = &ref24_clk,
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ and r10, r0, #0xff000000 @ ARM?
+ teq r10, #0x41000000
+ bne 2f
+ and r5, r0, #0x00f00000 @ variant
+ and r6, r0, #0x0000000f @ revision
+ orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+
#ifdef CONFIG_ARM_ERRATA_430973
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 6) @ set IBE to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r5, #0x00100000 @ only present in r1p*
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 6) @ set IBE to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 5) @ set L1NEON to 1
- orr r10, r10, #(1 << 9) @ set PLDNOP to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 5) @ set L1NEON to 1
+ orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
- mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
- orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
- mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ tsteq r10, #1 << 22
+ orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
- mov r10, #0
+
+2: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
extern unsigned int DoubleCPDO(struct roundingData *roundData,
const unsigned int opcode, FPREG * rFd);
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+ const unsigned int opcode, FPREG * rFd);
+
#endif
#include "fpmodule.inl"
#include "softfloat.h"
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode);
char floatx80_lt_quiet( floatx80, floatx80 );
char floatx80_is_signaling_nan( floatx80 );
+extern flag floatx80_is_nan(floatx80);
+
#endif
static inline flag extractFloat32Sign(float32 a)
config_invalid = 1;
return;
}
- if (rg.paddr)
+ if (rg.paddr) {
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
- reserved += rg.size;
+ reserved += rg.size;
+ }
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 160)
+ if (cpu_is_omap34xx() && gpio < 192)
return 0;
return -1;
}
int s3c24xx_register_clock(struct clk *clk)
{
- clk->owner = THIS_MODULE;
-
if (clk->enable == NULL)
clk->enable = clk_null_enable;
EXPORT_SYMBOL(s3c2410_dma_getposition);
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
{
return container_of(dev, struct s3c2410_dma_chan, dev);
}
#if 1
#define gpio_dbg(x...) do { } while(0)
#else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
+#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
+#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
+#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
+#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
+#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
+#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
+#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
+#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmt650 MACH_PALMT650 PALMT650 909
+treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
-xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
-palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
-palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
-palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
+treo700p MACH_TREO700P TREO700P 1421
+treo700w MACH_TREO700W TREO700W 1422
+treo750 MACH_TREO750 TREO750 1423
+treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
-stmp378x MACH_STMP38XX STMP38XX 1733
+stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
-at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
+at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
+ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
+ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
+m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
+str9104nas MACH_STAR9104NAS STAR9104NAS 2148
+pca100 MACH_PCA100 PCA100 2149
+z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
+hipox MACH_HIPOX HIPOX 2151
+omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
+bm150r MACH_BM150R BM150R 2153
+tbone MACH_TBONE TBONE 2154
+merlin MACH_MERLIN MERLIN 2155
+falcon MACH_FALCON FALCON 2156
+davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
+s5p6440 MACH_S5P6440 S5P6440 2158
+at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
+omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
+lpc313x MACH_LPC313X LPC313X 2161
+magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
+magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
+magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
+meesc MACH_MEESC MEESC 2165
+otc570 MACH_OTC570 OTC570 2166
+bcu2412 MACH_BCU2412 BCU2412 2167
+beacon MACH_BEACON BEACON 2168
+actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
+e4430 MACH_E4430 E4430 2170
+ql300 MACH_QL300 QL300 2171
+btmavb101 MACH_BTMAVB101 BTMAVB101 2172
+btmawb101 MACH_BTMAWB101 BTMAWB101 2173
+sq201 MACH_SQ201 SQ201 2174
+quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
+openpad MACH_OPENPAD OPENPAD 2176
+tx25 MACH_TX25 TX25 2177
+omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
+htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
+lal43 MACH_LAL43 LAL43 2181
+htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
+anw6410 MACH_ANW6410 ANW6410 2183
+htcprophet MACH_HTCPROPHET HTCPROPHET 2185
+cfa_10022 MACH_CFA_10022 CFA_10022 2186
+imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
+px2imx27 MACH_PX2IMX27 PX2IMX27 2188
+stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
+dvs10 MACH_DVS10 DVS10 2190
+portuxg20 MACH_PORTUXG20 PORTUXG20 2191
+arm_spv MACH_ARM_SPV ARM_SPV 2192
+smdkc110 MACH_SMDKC110 SMDKC110 2193
+cabespresso MACH_CABESPRESSO CABESPRESSO 2194
+hmc800 MACH_HMC800 HMC800 2195
+sholes MACH_SHOLES SHOLES 2196
+btmxc31 MACH_BTMXC31 BTMXC31 2197
+dt501 MACH_DT501 DT501 2198
+ktx MACH_KTX KTX 2199
+omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
+netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
+netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
+d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
+net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
+net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
+net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
+endb2443 MACH_ENDB2443 ENDB2443 2207
+inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
+tros MACH_TROS TROS 2209
+pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
+ofsp8 MACH_OFSP8 OFSP8 2211
+at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
+guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
+eab1r MACH_EAB1R EAB1R 2214
+desirec MACH_DESIREC DESIREC 2215
+cordoba MACH_CORDOBA CORDOBA 2216
+irvine MACH_IRVINE IRVINE 2217
+sff772 MACH_SFF772 SFF772 2218
+pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
+pc7302 MACH_PC7302 PC7302 2220
+bip6000 MACH_BIP6000 BIP6000 2221
+silvermoon MACH_SILVERMOON SILVERMOON 2222
+vc0830 MACH_VC0830 VC0830 2223
+dt430 MACH_DT430 DT430 2224
+ji42pf MACH_JI42PF JI42PF 2225
+gnet_ksm MACH_GNET_KSM GNET_KSM 2226
+gnet_sgm MACH_GNET_SGM GNET_SGM 2227
+gnet_sgr MACH_GNET_SGR GNET_SGR 2228
+omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
+pnp MACH_PNP PNP 2230
+ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
+ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
+sas_c MACH_SAS_C SAS_C 2233
+vma2315 MACH_VMA2315 VMA2315 2234
+vcs MACH_VCS VCS 2235
+spear600 MACH_SPEAR600 SPEAR600 2236
+spear300 MACH_SPEAR300 SPEAR300 2237
+spear1300 MACH_SPEAR1300 SPEAR1300 2238
+lilly1131 MACH_LILLY1131 LILLY1131 2239
+arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
+mapphone MACH_MAPPHONE MAPPHONE 2241
+legend MACH_LEGEND LEGEND 2242
+salsa MACH_SALSA SALSA 2243
+lounge MACH_LOUNGE LOUNGE 2244
+vision MACH_VISION VISION 2245
+vmb20 MACH_VMB20 VMB20 2246
+hy2410 MACH_HY2410 HY2410 2247
+hy9315 MACH_HY9315 HY9315 2248
+bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
+arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
+vs_v210 MACH_VS_V210 VS_V210 2252
+vs_v212 MACH_VS_V212 VS_V212 2253
+hmt MACH_HMT HMT 2254
+suen3 MACH_SUEN3 SUEN3 2255
+vesper MACH_VESPER VESPER 2256
+str9 MACH_STR9 STR9 2257
+omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
+simcom MACH_SIMCOM SIMCOM 2259
+mcwebio MACH_MCWEBIO MCWEBIO 2260
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
+#define __NR_preadv 366
+#define __NR_pwritev 367
-#define __NR_syscall 366
+#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
--- /dev/null
+vmlinux.lds
#define strncmp __inline_strncmp
#include <asm/string.h>
-#undef strncmp
-
#include <linux/module.h>
+#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#ifndef __ASM_M32R_FLAT_H
#define __ASM_M32R_FLAT_H
-#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_set_persistent(relval, p) 0
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# Exectuable file formats
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
intr_type =
*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
- if (intr_type >= (1 << nr_irq))
- printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+ if (intr_type >= (1 << (nr_irq + 1)))
+ printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
#ifdef CONFIG_SELFMOD_INTC
selfmod_function((int *) arr_func, intc_baseaddr);
select IRQ_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
+ select PCI
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
board, which is based on GT64120 bridge chip.
config CAVIUM_OCTEON_SIMULATOR
- bool "Support for the Cavium Networks Octeon Simulator"
+ bool "Cavium Networks Octeon Simulator"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
hardware.
config CAVIUM_OCTEON_REFERENCE_BOARD
- bool "Support for the Cavium Networks Octeon reference board"
+ bool "Cavium Networks Octeon reference board"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
ifdef CONFIG_SGI_IP28
- ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
- $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
endif
endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
struct cpuinfo_mips {
- unsigned long udelay_val;
- unsigned long asid_cache;
+ unsigned int udelay_val;
+ unsigned int asid_cache;
/*
* Capability and feature descriptor structure for MIPS CPU
#ifndef _ASM_DELAY_H
#define _ASM_DELAY_H
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
- if (sizeof(long) == 4)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " subu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && !DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, %2 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
- unsigned long hi, lo;
-
- /*
- * The rates of 128 is rounded wrongly by the catchall case
- * for 64-bit. Excessive precission? Probably ...
- */
-#if defined(CONFIG_64BIT) && (HZ == 128)
- usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
- usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
- usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
- 0x80000000ULL) >> 32);
-#endif
-
- if (sizeof(long) == 4)
- __asm__("multu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && !R4000_WAR)
- __asm__("dmultu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && R4000_WAR)
- __asm__("dmultu\t%3, %4\n\tmfhi\t%0"
- : "=r" (usecs), "=h" (hi), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
-
- __delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
/* make sure "usecs *= ..." in udelay do not overflow. */
#if HZ >= 1000
((nr) << _IOC_NRSHIFT) | \
((size) << _IOC_SIZESHIFT))
+#ifdef __KERNEL__
/* provoke compile error for invalid uses of size argument */
extern unsigned int __invalid_size_argument_for_IOC;
#define _IOC_TYPECHECK(t) \
((sizeof(t) == sizeof(t[1]) && \
sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
/* used to create numbers */
#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0)
void __user * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && access_ok(VERIFY_WRITE, \
- ((unsigned long)(__cl_addr)), __cl_size)) \
+ __cl_addr, __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; \
})
seq_printf(m, fmt, __cpu_name[n],
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
- seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+ seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
cpu_data[n].udelay_val / (500000/HZ),
(cpu_data[n].udelay_val / (5000/HZ)) % 100);
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
- strncpy_user.o strnlen_user.o uncached.o
+lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+ strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " subu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
/* Usable for KV1 addresses only! */
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Wait until interrupt goes away */
- disable_irq(SGI_PANEL_IRQ);
+ disable_irq_nosync(SGI_PANEL_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 5;
static void ip32_machine_power_off(void)
{
- volatile unsigned char reg_a, xctrl_a, xctrl_b;
+ unsigned char reg_a, xctrl_a, xctrl_b;
disable_irq(MACEISA_RTC_IRQ);
reg_a = CMOS_READ(RTC_REG_A);
static void debounce(unsigned long data)
{
- volatile unsigned char reg_a, reg_c, xctrl_a;
+ unsigned char reg_a, reg_c, xctrl_a;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
+ reg_a = CMOS_READ(RTC_REG_A);
CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
wbflush();
xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
{
- volatile unsigned char reg_c;
+ unsigned char reg_c;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
"%s: RTC IRQ without RTC_IRQF\n", __func__);
}
/* Wait until interrupt goes away */
- disable_irq(MACEISA_RTC_IRQ);
+ disable_irq_nosync(MACEISA_RTC_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 50;
*/
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
- if (argc < 0) {
- /*
- * It's OK for direct boot to not provide a
- * command line
- */
- strcpy(arcs_cmdline, "root=/dev/ram0 ");
- } else {
+ if (argc >= 0) {
/* The loader should have set the command line */
/* too early for panic to do any good */
printk("LINUX_CMDLINE not defined in cfe.");
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_ANSLCD is not set
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
Code Review / linux-2.6.git / commitdiff