Say 'Y' here to allow you to select framebuffer drivers for
the AMD Geode family of processors.
+config FB_GEODE_GX
+ tristate "AMD Geode GX framebuffer support (EXPERIMENTAL)"
+ depends on FB && FB_GEODE && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the display controller integrated into the
+ AMD Geode GX processors.
+
+ To compile this driver as a module, choose M here: the module will be
+ called gxfb.
+
+ If unsure, say N.
+
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
- depends on FB_GEODE && EXPERIMENTAL
+ depends on FB && FB_GEODE && EXPERIMENTAL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
# Makefile for the Geode family framebuffer drivers
obj-$(CONFIG_FB_GEODE_GX1) += gx1fb.o
+obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
-gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
+gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
+gxfb-objs := gxfb_core.o display_gx.o video_gx.o
--- /dev/null
+/*
+ * Geode GX display controller.
+ *
+ * Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ * Portions from AMD's original 2.4 driver:
+ * Copyright (C) 2004 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by * the
+ * Free Software Foundation; either version 2 of the License, or * (at your
+ * option) any later version.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+
+#include "geodefb.h"
+#include "display_gx.h"
+
+int gx_frame_buffer_size(void)
+{
+ /* Assuming 16 MiB. */
+ return 16*1024*1024;
+}
+
+int gx_line_delta(int xres, int bpp)
+{
+ /* Must be a multiple of 8 bytes. */
+ return (xres * (bpp >> 3) + 7) & ~0x7;
+}
+
+static void gx_set_mode(struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+ u32 gcfg, dcfg;
+ int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+ int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+ /* Unlock the display controller registers. */
+ readl(par->dc_regs + DC_UNLOCK);
+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+ gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+ dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+
+ /* Disable the timing generator. */
+ dcfg &= ~(DC_DCFG_TGEN);
+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+
+ /* Wait for pending memory requests before disabling the FIFO load. */
+ udelay(100);
+
+ /* Disable FIFO load and compression. */
+ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+ /* Setup DCLK and its divisor. */
+ par->vid_ops->set_dclk(info);
+
+ /*
+ * Setup new mode.
+ */
+
+ /* Clear all unused feature bits. */
+ gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+ dcfg = 0;
+
+ /* Set FIFO priority (default 6/5) and enable. */
+ /* FIXME: increase fifo priority for 1280x1024 and higher modes? */
+ gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+ /* Framebuffer start offset. */
+ writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+ /* Line delta and line buffer length. */
+ writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+ writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+ par->dc_regs + DC_LINE_SIZE);
+
+ /* Enable graphics and video data and unmask address lines. */
+ dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
+
+ /* Set pixel format. */
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ dcfg |= DC_DCFG_DISP_MODE_8BPP;
+ break;
+ case 16:
+ dcfg |= DC_DCFG_DISP_MODE_16BPP;
+ dcfg |= DC_DCFG_16BPP_MODE_565;
+ break;
+ case 32:
+ dcfg |= DC_DCFG_DISP_MODE_24BPP;
+ dcfg |= DC_DCFG_PALB;
+ break;
+ }
+
+ /* Enable timing generator. */
+ dcfg |= DC_DCFG_TGEN;
+
+ /* Horizontal and vertical timings. */
+ hactive = info->var.xres;
+ hblankstart = hactive;
+ hsyncstart = hblankstart + info->var.right_margin;
+ hsyncend = hsyncstart + info->var.hsync_len;
+ hblankend = hsyncend + info->var.left_margin;
+ htotal = hblankend;
+
+ vactive = info->var.yres;
+ vblankstart = vactive;
+ vsyncstart = vblankstart + info->var.lower_margin;
+ vsyncend = vsyncstart + info->var.vsync_len;
+ vblankend = vsyncend + info->var.upper_margin;
+ vtotal = vblankend;
+
+ writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
+ writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+ writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
+
+ writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
+ writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+ writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
+
+ /* Write final register values. */
+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+ par->vid_ops->configure_display(info);
+
+ /* Relock display controller registers */
+ writel(0, par->dc_regs + DC_UNLOCK);
+}
+
+static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+ unsigned red, unsigned green, unsigned blue)
+{
+ struct geodefb_par *par = info->par;
+ int val;
+
+ /* Hardware palette is in RGB 8-8-8 format. */
+ val = (red << 8) & 0xff0000;
+ val |= (green) & 0x00ff00;
+ val |= (blue >> 8) & 0x0000ff;
+
+ writel(regno, par->dc_regs + DC_PAL_ADDRESS);
+ writel(val, par->dc_regs + DC_PAL_DATA);
+}
+
+struct geode_dc_ops gx_dc_ops = {
+ .set_mode = gx_set_mode,
+ .set_palette_reg = gx_set_hw_palette_reg,
+};
--- /dev/null
+/*
+ * Geode GX display controller
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DISPLAY_GX_H__
+#define __DISPLAY_GX_H__
+
+int gx_frame_buffer_size(void);
+int gx_line_delta(int xres, int bpp);
+
+extern struct geode_dc_ops gx_dc_ops;
+
+/* Display controller registers */
+
+#define DC_UNLOCK 0x00
+# define DC_UNLOCK_CODE 0x00004758
+
+#define DC_GENERAL_CFG 0x04
+# define DC_GCFG_DFLE 0x00000001
+# define DC_GCFG_CURE 0x00000002
+# define DC_GCFG_ICNE 0x00000004
+# define DC_GCFG_VIDE 0x00000008
+# define DC_GCFG_CMPE 0x00000020
+# define DC_GCFG_DECE 0x00000040
+# define DC_GCFG_VGAE 0x00000080
+# define DC_GCFG_DFHPSL_MASK 0x00000F00
+# define DC_GCFG_DFHPSL_POS 8
+# define DC_GCFG_DFHPEL_MASK 0x0000F000
+# define DC_GCFG_DFHPEL_POS 12
+# define DC_GCFG_STFM 0x00010000
+# define DC_GCFG_FDTY 0x00020000
+# define DC_GCFG_VGAFT 0x00040000
+# define DC_GCFG_VDSE 0x00080000
+# define DC_GCFG_YUVM 0x00100000
+# define DC_GCFG_VFSL 0x00800000
+# define DC_GCFG_SIGE 0x01000000
+# define DC_GCFG_SGRE 0x02000000
+# define DC_GCFG_SGFR 0x04000000
+# define DC_GCFG_CRC_MODE 0x08000000
+# define DC_GCFG_DIAG 0x10000000
+# define DC_GCFG_CFRW 0x20000000
+
+#define DC_DISPLAY_CFG 0x08
+# define DC_DCFG_TGEN 0x00000001
+# define DC_DCFG_GDEN 0x00000008
+# define DC_DCFG_VDEN 0x00000010
+# define DC_DCFG_TRUP 0x00000040
+# define DC_DCFG_DISP_MODE_MASK 0x00000300
+# define DC_DCFG_DISP_MODE_8BPP 0x00000000
+# define DC_DCFG_DISP_MODE_16BPP 0x00000100
+# define DC_DCFG_DISP_MODE_24BPP 0x00000200
+# define DC_DCFG_16BPP_MODE_MASK 0x00000c00
+# define DC_DCFG_16BPP_MODE_565 0x00000000
+# define DC_DCFG_16BPP_MODE_555 0x00000100
+# define DC_DCFG_16BPP_MODE_444 0x00000200
+# define DC_DCFG_DCEN 0x00080000
+# define DC_DCFG_PALB 0x02000000
+# define DC_DCFG_FRLK 0x04000000
+# define DC_DCFG_VISL 0x08000000
+# define DC_DCFG_FRSL 0x20000000
+# define DC_DCFG_A18M 0x40000000
+# define DC_DCFG_A20M 0x80000000
+
+#define DC_FB_ST_OFFSET 0x10
+
+#define DC_LINE_SIZE 0x30
+# define DC_LINE_SIZE_FB_LINE_SIZE_MASK 0x000007ff
+# define DC_LINE_SIZE_FB_LINE_SIZE_POS 0
+# define DC_LINE_SIZE_CB_LINE_SIZE_MASK 0x007f0000
+# define DC_LINE_SIZE_CB_LINE_SIZE_POS 16
+# define DC_LINE_SIZE_VID_LINE_SIZE_MASK 0xff000000
+# define DC_LINE_SIZE_VID_LINE_SIZE_POS 24
+
+#define DC_GFX_PITCH 0x34
+# define DC_GFX_PITCH_FB_PITCH_MASK 0x0000ffff
+# define DC_GFX_PITCH_FB_PITCH_POS 0
+# define DC_GFX_PITCH_CB_PITCH_MASK 0xffff0000
+# define DC_GFX_PITCH_CB_PITCH_POS 16
+
+#define DC_H_ACTIVE_TIMING 0x40
+#define DC_H_BLANK_TIMING 0x44
+#define DC_H_SYNC_TIMING 0x48
+#define DC_V_ACTIVE_TIMING 0x50
+#define DC_V_BLANK_TIMING 0x54
+#define DC_V_SYNC_TIMING 0x58
+
+#define DC_PAL_ADDRESS 0x70
+#define DC_PAL_DATA 0x74
+
+#endif /* !__DISPLAY_GX1_H__ */
--- /dev/null
+/*
+ * Geode GX framebuffer driver.
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * This driver assumes that the BIOS has created a virtual PCI device header
+ * for the video device. The PCI header is assumed to contain the following
+ * BARs:
+ *
+ * BAR0 - framebuffer memory
+ * BAR1 - graphics processor registers
+ * BAR2 - display controller registers
+ * BAR3 - video processor and flat panel control registers.
+ *
+ * 16 MiB of framebuffer memory is assumed to be available.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include "geodefb.h"
+#include "display_gx.h"
+#include "video_gx.h"
+
+static char mode_option[32] = "640x480-16@60";
+
+/* Modes relevant to the GX (taken from modedb.c) */
+static const struct fb_videomode __initdata gx_modedb[] = {
+ /* 640x480-60 VESA */
+ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 640x480-75 VESA */
+ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 640x480-85 VESA */
+ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 800x600-60 VESA */
+ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 800x600-75 VESA */
+ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 800x600-85 VESA */
+ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1024x768-60 VESA */
+ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1024x768-75 VESA */
+ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1024x768-85 VESA */
+ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1280x960-60 VESA */
+ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1280x960-85 VESA */
+ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1280x1024-60 VESA */
+ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1280x1024-75 VESA */
+ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1280x1024-85 VESA */
+ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1600x1200-60 VESA */
+ { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1600x1200-75 VESA */
+ { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1600x1200-85 VESA */
+ { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+};
+
+static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ if (var->xres > 1600 || var->yres > 1200)
+ return -EINVAL;
+ if ((var->xres > 1280 || var->yres > 1024) && var->bits_per_pixel > 16)
+ return -EINVAL;
+
+ if (var->bits_per_pixel == 32) {
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ } else if (var->bits_per_pixel == 16) {
+ var->red.offset = 11; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 0; var->blue.length = 5;
+ } else if (var->bits_per_pixel == 8) {
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 0; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ } else
+ return -EINVAL;
+ var->transp.offset = 0; var->transp.length = 0;
+
+ /* Enough video memory? */
+ if (gx_line_delta(var->xres, var->bits_per_pixel) * var->yres > info->fix.smem_len)
+ return -EINVAL;
+
+ /* FIXME: Check timing parameters here? */
+
+ return 0;
+}
+
+static int gxfb_set_par(struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+
+ if (info->var.bits_per_pixel > 8) {
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ fb_dealloc_cmap(&info->cmap);
+ } else {
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
+ }
+
+ info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel);
+
+ par->dc_ops->set_mode(info);
+
+ return 0;
+}
+
+static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int gxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ /* Truecolor has hardware independent palette */
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 *pal = info->pseudo_palette;
+ u32 v;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ v = chan_to_field(red, &info->var.red);
+ v |= chan_to_field(green, &info->var.green);
+ v |= chan_to_field(blue, &info->var.blue);
+
+ pal[regno] = v;
+ } else {
+ if (regno >= 256)
+ return -EINVAL;
+
+ par->dc_ops->set_palette_reg(info, regno, red, green, blue);
+ }
+
+ return 0;
+}
+
+static int gxfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+
+ return par->vid_ops->blank_display(info, blank_mode);
+}
+
+static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+{
+ struct geodefb_par *par = info->par;
+ int fb_len;
+ int ret;
+
+ ret = pci_enable_device(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = pci_request_region(dev, 3, "gxfb (video processor)");
+ if (ret < 0)
+ return ret;
+ par->vid_regs = ioremap(pci_resource_start(dev, 3),
+ pci_resource_len(dev, 3));
+ if (!par->vid_regs)
+ return -ENOMEM;
+
+ ret = pci_request_region(dev, 2, "gxfb (display controller)");
+ if (ret < 0)
+ return ret;
+ par->dc_regs = ioremap(pci_resource_start(dev, 2), pci_resource_len(dev, 2));
+ if (!par->dc_regs)
+ return -ENOMEM;
+
+ ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
+ if (ret < 0)
+ return ret;
+ if ((fb_len = gx_frame_buffer_size()) < 0)
+ return -ENOMEM;
+ info->fix.smem_start = pci_resource_start(dev, 0);
+ info->fix.smem_len = fb_len;
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ return -ENOMEM;
+
+ dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
+ info->fix.smem_len / 1024, info->fix.smem_start);
+
+ return 0;
+}
+
+static struct fb_ops gxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = gxfb_check_var,
+ .fb_set_par = gxfb_set_par,
+ .fb_setcolreg = gxfb_setcolreg,
+ .fb_blank = gxfb_blank,
+ /* No HW acceleration for now. */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+{
+ struct geodefb_par *par;
+ struct fb_info *info;
+
+ /* Alloc enough space for the pseudo palette. */
+ info = framebuffer_alloc(sizeof(struct geodefb_par) + sizeof(u32) * 16, dev);
+ if (!info)
+ return NULL;
+
+ par = info->par;
+
+ strcpy(info->fix.id, "Geode GX");
+
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type_aux = 0;
+ info->fix.xpanstep = 0;
+ info->fix.ypanstep = 0;
+ info->fix.ywrapstep = 0;
+ info->fix.accel = FB_ACCEL_NONE;
+
+ info->var.nonstd = 0;
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->var.height = -1;
+ info->var.width = -1;
+ info->var.accel_flags = 0;
+ info->var.vmode = FB_VMODE_NONINTERLACED;
+
+ info->fbops = &gxfb_ops;
+ info->flags = FBINFO_DEFAULT;
+ info->node = -1;
+
+ info->pseudo_palette = (void *)par + sizeof(struct geodefb_par);
+
+ info->var.grayscale = 0;
+
+ return info;
+}
+
+static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct geodefb_par *par;
+ struct fb_info *info;
+ int ret;
+
+ info = gxfb_init_fbinfo(&pdev->dev);
+ if (!info)
+ return -ENOMEM;
+ par = info->par;
+
+ /* GX display controller and GX video device. */
+ par->dc_ops = &gx_dc_ops;
+ par->vid_ops = &gx_vid_ops;
+
+ if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
+ dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
+ goto err;
+ }
+
+ ret = fb_find_mode(&info->var, info, mode_option,
+ gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
+ if (ret == 0 || ret == 4) {
+ dev_err(&pdev->dev, "could not find valid video mode\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* Clear the frame buffer of garbage. */
+ memset_io(info->screen_base, 0, info->fix.smem_len);
+
+ gxfb_check_var(&info->var, info);
+ gxfb_set_par(info);
+
+ if (register_framebuffer(info) < 0) {
+ ret = -EINVAL;
+ goto err;
+ }
+ pci_set_drvdata(pdev, info);
+ printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
+ return 0;
+
+ err:
+ if (info->screen_base) {
+ iounmap(info->screen_base);
+ pci_release_region(pdev, 0);
+ }
+ if (par->vid_regs) {
+ iounmap(par->vid_regs);
+ pci_release_region(pdev, 3);
+ }
+ if (par->dc_regs) {
+ iounmap(par->dc_regs);
+ pci_release_region(pdev, 2);
+ }
+
+ pci_disable_device(pdev);
+
+ if (info)
+ framebuffer_release(info);
+ return ret;
+}
+
+static void gxfb_remove(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct geodefb_par *par = info->par;
+
+ unregister_framebuffer(info);
+
+ iounmap((void __iomem *)info->screen_base);
+ pci_release_region(pdev, 0);
+
+ iounmap(par->vid_regs);
+ pci_release_region(pdev, 3);
+
+ iounmap(par->dc_regs);
+ pci_release_region(pdev, 2);
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+ framebuffer_release(info);
+}
+
+static struct pci_device_id gxfb_id_table[] = {
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_VIDEO,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+ 0xff0000, 0 },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, gxfb_id_table);
+
+static struct pci_driver gxfb_driver = {
+ .name = "gxfb",
+ .id_table = gxfb_id_table,
+ .probe = gxfb_probe,
+ .remove = gxfb_remove,
+};
+
+static int __init gxfb_init(void)
+{
+#ifndef MODULE
+ if (fb_get_options("gxfb", NULL))
+ return -ENODEV;
+#endif
+ return pci_register_driver(&gxfb_driver);
+}
+
+static void __exit gxfb_cleanup(void)
+{
+ pci_unregister_driver(&gxfb_driver);
+}
+
+module_init(gxfb_init);
+module_exit(gxfb_cleanup);
+
+module_param_string(mode, mode_option, sizeof(mode_option), 0444);
+MODULE_PARM_DESC(mode, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+
+MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Geode GX video processor device.
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * Portions from AMD's original 2.4 driver:
+ * Copyright (C) 2004 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/msr.h>
+
+#include "geodefb.h"
+#include "video_gx.h"
+
+
+/*
+ * Tables of register settings for various DOTCLKs.
+ */
+struct gx_pll_entry {
+ long pixclock; /* ps */
+ u32 sys_rstpll_bits;
+ u32 dotpll_value;
+};
+
+#define POSTDIV3 ((u32)MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)
+#define PREMULT2 ((u32)MSR_GLCP_SYS_RSTPLL_DOTPREMULT2)
+#define PREDIV2 ((u32)MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)
+
+static const struct gx_pll_entry gx_pll_table_48MHz[] = {
+ { 40123, POSTDIV3, 0x00000BF2 }, /* 24.9230 */
+ { 39721, 0, 0x00000037 }, /* 25.1750 */
+ { 35308, POSTDIV3|PREMULT2, 0x00000B1A }, /* 28.3220 */
+ { 31746, POSTDIV3, 0x000002D2 }, /* 31.5000 */
+ { 27777, POSTDIV3|PREMULT2, 0x00000FE2 }, /* 36.0000 */
+ { 26666, POSTDIV3, 0x0000057A }, /* 37.5000 */
+ { 25000, POSTDIV3, 0x0000030A }, /* 40.0000 */
+ { 22271, 0, 0x00000063 }, /* 44.9000 */
+ { 20202, 0, 0x0000054B }, /* 49.5000 */
+ { 20000, 0, 0x0000026E }, /* 50.0000 */
+ { 19860, PREMULT2, 0x00000037 }, /* 50.3500 */
+ { 18518, POSTDIV3|PREMULT2, 0x00000B0D }, /* 54.0000 */
+ { 17777, 0, 0x00000577 }, /* 56.2500 */
+ { 17733, 0, 0x000007F7 }, /* 56.3916 */
+ { 17653, 0, 0x0000057B }, /* 56.6444 */
+ { 16949, PREMULT2, 0x00000707 }, /* 59.0000 */
+ { 15873, POSTDIV3|PREMULT2, 0x00000B39 }, /* 63.0000 */
+ { 15384, POSTDIV3|PREMULT2, 0x00000B45 }, /* 65.0000 */
+ { 14814, POSTDIV3|PREMULT2, 0x00000FC1 }, /* 67.5000 */
+ { 14124, POSTDIV3, 0x00000561 }, /* 70.8000 */
+ { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
+ { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
+ { 13333, 0, 0x00000052 }, /* 75.0000 */
+ { 12698, 0, 0x00000056 }, /* 78.7500 */
+ { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
+ { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
+ { 10582, 0, 0x000002D2 }, /* 94.5000 */
+ { 10101, PREMULT2, 0x00000B4A }, /* 99.0000 */
+ { 10000, PREMULT2, 0x00000036 }, /* 100.0000 */
+ { 9259, 0, 0x000007E2 }, /* 108.0000 */
+ { 8888, 0, 0x000007F6 }, /* 112.5000 */
+ { 7692, POSTDIV3|PREMULT2, 0x00000FB0 }, /* 130.0000 */
+ { 7407, POSTDIV3|PREMULT2, 0x00000B50 }, /* 135.0000 */
+ { 6349, 0, 0x00000055 }, /* 157.5000 */
+ { 6172, 0, 0x000009C1 }, /* 162.0000 */
+ { 5787, PREMULT2, 0x0000002D }, /* 172.798 */
+ { 5698, 0, 0x000002C1 }, /* 175.5000 */
+ { 5291, 0, 0x000002D1 }, /* 189.0000 */
+ { 4938, 0, 0x00000551 }, /* 202.5000 */
+ { 4357, 0, 0x0000057D }, /* 229.5000 */
+};
+
+static const struct gx_pll_entry gx_pll_table_14MHz[] = {
+ { 39721, 0, 0x00000037 }, /* 25.1750 */
+ { 35308, 0, 0x00000B7B }, /* 28.3220 */
+ { 31746, 0, 0x000004D3 }, /* 31.5000 */
+ { 27777, 0, 0x00000BE3 }, /* 36.0000 */
+ { 26666, 0, 0x0000074F }, /* 37.5000 */
+ { 25000, 0, 0x0000050B }, /* 40.0000 */
+ { 22271, 0, 0x00000063 }, /* 44.9000 */
+ { 20202, 0, 0x0000054B }, /* 49.5000 */
+ { 20000, 0, 0x0000026E }, /* 50.0000 */
+ { 19860, 0, 0x000007C3 }, /* 50.3500 */
+ { 18518, 0, 0x000007E3 }, /* 54.0000 */
+ { 17777, 0, 0x00000577 }, /* 56.2500 */
+ { 17733, 0, 0x000002FB }, /* 56.3916 */
+ { 17653, 0, 0x0000057B }, /* 56.6444 */
+ { 16949, 0, 0x0000058B }, /* 59.0000 */
+ { 15873, 0, 0x0000095E }, /* 63.0000 */
+ { 15384, 0, 0x0000096A }, /* 65.0000 */
+ { 14814, 0, 0x00000BC2 }, /* 67.5000 */
+ { 14124, 0, 0x0000098A }, /* 70.8000 */
+ { 13888, 0, 0x00000BE2 }, /* 72.0000 */
+ { 13333, 0, 0x00000052 }, /* 75.0000 */
+ { 12698, 0, 0x00000056 }, /* 78.7500 */
+ { 12500, 0, 0x0000050A }, /* 80.0000 */
+ { 11135, 0, 0x0000078E }, /* 89.8000 */
+ { 10582, 0, 0x000002D2 }, /* 94.5000 */
+ { 10101, 0, 0x000011F6 }, /* 99.0000 */
+ { 10000, 0, 0x0000054E }, /* 100.0000 */
+ { 9259, 0, 0x000007E2 }, /* 108.0000 */
+ { 8888, 0, 0x000002FA }, /* 112.5000 */
+ { 7692, 0, 0x00000BB1 }, /* 130.0000 */
+ { 7407, 0, 0x00000975 }, /* 135.0000 */
+ { 6349, 0, 0x00000055 }, /* 157.5000 */
+ { 6172, 0, 0x000009C1 }, /* 162.0000 */
+ { 5698, 0, 0x000002C1 }, /* 175.5000 */
+ { 5291, 0, 0x00000539 }, /* 189.0000 */
+ { 4938, 0, 0x00000551 }, /* 202.5000 */
+ { 4357, 0, 0x0000057D }, /* 229.5000 */
+};
+
+static void gx_set_dclk_frequency(struct fb_info *info)
+{
+ const struct gx_pll_entry *pll_table;
+ int pll_table_len;
+ int i, best_i;
+ long min, diff;
+ u64 dotpll, sys_rstpll;
+ int timeout = 1000;
+
+ /* Rev. 1 Geode GXs use a 14 MHz reference clock instead of 48 MHz. */
+ if (cpu_data->x86_mask == 1) {
+ pll_table = gx_pll_table_14MHz;
+ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
+ } else {
+ pll_table = gx_pll_table_48MHz;
+ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
+ }
+
+ /* Search the table for the closest pixclock. */
+ best_i = 0;
+ min = abs(pll_table[0].pixclock - info->var.pixclock);
+ for (i = 1; i < pll_table_len; i++) {
+ diff = abs(pll_table[i].pixclock - info->var.pixclock);
+ if (diff < min) {
+ min = diff;
+ best_i = i;
+ }
+ }
+
+ rdmsrl(MSR_GLCP_SYS_RSTPLL, sys_rstpll);
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ /* Program new M, N and P. */
+ dotpll &= 0x00000000ffffffffull;
+ dotpll |= (u64)pll_table[best_i].dotpll_value << 32;
+ dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
+ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
+
+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ /* Program dividers. */
+ sys_rstpll &= ~( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2
+ | MSR_GLCP_SYS_RSTPLL_DOTPREMULT2
+ | MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 );
+ sys_rstpll |= pll_table[best_i].sys_rstpll_bits;
+
+ wrmsrl(MSR_GLCP_SYS_RSTPLL, sys_rstpll);
+
+ /* Clear reset bit to start PLL. */
+ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ /* Wait for LOCK bit. */
+ do {
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
+}
+
+static void gx_configure_display(struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+ u32 dcfg, fp_pm;
+
+ dcfg = readl(par->vid_regs + GX_DCFG);
+
+ /* Clear bits from existing mode. */
+ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
+ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
+ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+
+ /* Set default sync skew. */
+ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+
+ /* Enable hsync and vsync. */
+ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+
+ /* Sync polarities. */
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ dcfg |= GX_DCFG_CRT_HSYNC_POL;
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ dcfg |= GX_DCFG_CRT_VSYNC_POL;
+
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
+ /* Power on flat panel. */
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+ fp_pm |= GX_FP_PM_P;
+ writel(fp_pm, par->vid_regs + GX_FP_PM);
+}
+
+static int gx_blank_display(struct fb_info *info, int blank_mode)
+{
+ struct geodefb_par *par = info->par;
+ u32 dcfg, fp_pm;
+ int blank, hsync, vsync;
+
+ /* CRT power saving modes. */
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ blank = 0; hsync = 1; vsync = 1;
+ break;
+ case FB_BLANK_NORMAL:
+ blank = 1; hsync = 1; vsync = 1;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ blank = 1; hsync = 1; vsync = 0;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ blank = 1; hsync = 0; vsync = 1;
+ break;
+ case FB_BLANK_POWERDOWN:
+ blank = 1; hsync = 0; vsync = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ dcfg = readl(par->vid_regs + GX_DCFG);
+ dcfg &= ~(GX_DCFG_DAC_BL_EN
+ | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
+ if (!blank)
+ dcfg |= GX_DCFG_DAC_BL_EN;
+ if (hsync)
+ dcfg |= GX_DCFG_HSYNC_EN;
+ if (vsync)
+ dcfg |= GX_DCFG_VSYNC_EN;
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
+ /* Power on/off flat panel. */
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+ if (blank_mode == FB_BLANK_POWERDOWN)
+ fp_pm &= ~GX_FP_PM_P;
+ else
+ fp_pm |= GX_FP_PM_P;
+ writel(fp_pm, par->vid_regs + GX_FP_PM);
+
+ return 0;
+}
+
+struct geode_vid_ops gx_vid_ops = {
+ .set_dclk = gx_set_dclk_frequency,
+ .configure_display = gx_configure_display,
+ .blank_display = gx_blank_display,
+};
--- /dev/null
+/*
+ * Geode GX video device
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VIDEO_GX_H__
+#define __VIDEO_GX_H__
+
+extern struct geode_vid_ops gx_vid_ops;
+
+/* Geode GX video processor registers */
+
+#define GX_DCFG 0x0008
+# define GX_DCFG_CRT_EN 0x00000001
+# define GX_DCFG_HSYNC_EN 0x00000002
+# define GX_DCFG_VSYNC_EN 0x00000004
+# define GX_DCFG_DAC_BL_EN 0x00000008
+# define GX_DCFG_CRT_HSYNC_POL 0x00000100
+# define GX_DCFG_CRT_VSYNC_POL 0x00000200
+# define GX_DCFG_CRT_SYNC_SKW_MASK 0x0001C000
+# define GX_DCFG_CRT_SYNC_SKW_DFLT 0x00010000
+# define GX_DCFG_VG_CK 0x00100000
+# define GX_DCFG_GV_GAM 0x00200000
+# define GX_DCFG_DAC_VREF 0x04000000
+
+/* Geode GX flat panel display control registers */
+#define GX_FP_PM 0x410
+# define GX_FP_PM_P 0x01000000
+
+/* Geode GX clock control MSRs */
+
+#define MSR_GLCP_SYS_RSTPLL 0x4c000014
+# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)
+# define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 (0x0000000000000004ull)
+# define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3 (0x0000000000000008ull)
+
+#define MSR_GLCP_DOTPLL 0x4c000015
+# define MSR_GLCP_DOTPLL_DOTRESET (0x0000000000000001ull)
+# define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
+# define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
+
+#endif /* !__VIDEO_GX_H__ */
Code Review / linux-2.6.git / commitdiff