* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource, acpi_pm.c: check for monotonicity
clocksource, acpi_pm.c: use proper read function also in errata mode
ntp: fix calculation of the next jiffie to trigger RTC sync
x86: HPET: read back compare register before reading counter
x86: HPET fix moronic 32/64bit thinko
clockevents: broadcast fixup possible waiters
HPET: make minimum reprogramming delta useful
clockevents: prevent endless loop lockup
clockevents: prevent multiple init/shutdown
clockevents: enforce reprogram in oneshot setup
clockevents: prevent endless loop in periodic broadcast handler
clockevents: prevent clockevent event_handler ending up handler_noop
- LCD brightness control
- Volume control
- Fan control and monitoring: fan speed, fan enable/disable
- - Experimental: WAN enable and disable
+ - WAN enable and disable
A compatibility table by model and feature is maintained on the web
site, http://ibm-acpi.sf.net/. I appreciate any success or failure
would be the safest choice, though).
-EXPERIMENTAL: WAN
------------------
+WAN
+---
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan_enable (deprecated)
sysfs rfkill class: switch "tpacpi_wwan_sw"
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
This feature shows the presence and current state of a W-WAN (Sierra
Wireless EV-DO) device.
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]
+ 5 -> Hauppauge Woodbury (au0828) [2040:8200]
zc3xx 0471:0326 Philips SPC 300 NC
sonixj 0471:0327 Philips SPC 600 NC
sonixj 0471:0328 Philips SPC 700 NC
-zc3xx 0471:032d Philips spc210nc
-zc3xx 0471:032e Philips spc315nc
-sonixj 0471:0330 Philips SPC 710NC
+zc3xx 0471:032d Philips SPC 210 NC
+zc3xx 0471:032e Philips SPC 315 NC
+sonixj 0471:0330 Philips SPC 710 NC
spca501 0497:c001 Smile International
sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
-sunplus 04a5:300a Benq DC3410
-spca500 04a5:300c Benq DC1016
+sunplus 04a5:300a Benq DC 3410
+spca500 04a5:300c Benq DC 1016
sunplus 04f1:1001 JVC GC A50
spca561 04fc:0561 Flexcam 100
sunplus 04fc:500c Sunplus CA500C
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
pac207 093a:2460 PAC207 Qtec Webcam 100
-pac207 093a:2463 Philips spc200nc pac207
+pac207 093a:2463 Philips SPC 220 NC
pac207 093a:2464 Labtec Webcam 1200
pac207 093a:2468 PAC207
pac207 093a:2470 Genius GF112
-pac207 093a:2471 PAC207 Genius VideoCam ge111
-pac207 093a:2472 PAC207 Genius VideoCam ge110
+pac207 093a:2471 Genius VideoCam ge111
+pac207 093a:2472 Genius VideoCam ge110
pac7311 093a:2600 PAC7311 Typhoon
-pac7311 093a:2601 PAC7311 Phillips SPC610NC
+pac7311 093a:2601 Philips SPC 610 NC
pac7311 093a:2603 PAC7312
-pac7311 093a:2608 PAC7311 Trust WB-3300p
-pac7311 093a:260e PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311 093a:260f PAC7311 SnakeCam
+pac7311 093a:2608 Trust WB-3300p
+pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311 093a:260f SnakeCam
pac7311 093a:2621 PAC731x
+pac7311 093a:2624 PAC7302
+pac7311 093a:2626 Labtec 2200
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
+sonixj 0c45:6128 Microdia/Sonix SNP325
sonixj 0c45:612a Avant Camera
sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix
sonixj 0c45:6130 Sonix Pccam
spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
spca501 1776:501c Arowana 300K CMOS Camera
-t613 17a1:0128 T613/TAS5130A
+t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
spca500 2899:012c Toptro Industrial
S: Maintained
ACPI
-P: Andi Kleen
-M: ak@linux.intel.com
+P: Len Brown
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
#include <linux/compiler.h>
#include <asm/types.h>
-#ifdef __ARMEB__
-# define __BIG_ENDIAN
-#else
-# define __LITTLE_ENDIAN
-#endif
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
__u32 t;
return x;
}
-#define __arch_swab32 __arch_swab32
-#include <linux/byteorder.h>
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
#endif
+
source "init/Kconfig"
+config PROBE_INITRD_HEADER
+ bool "Probe initrd header created by addinitrd"
+ depends on BLK_DEV_INITRD
+ help
+ Probe initrd header at the last page of kernel image.
+ Say Y here if you are using arch/mips/boot/addinitrd.c to
+ add initrd or initramfs image to the kernel image.
+ Otherwise, say N.
+
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
static unsigned long __init init_initrd(void)
{
unsigned long end;
- u32 *initrd_header;
/*
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
- if (initrd_start && initrd_end > initrd_start)
- goto sanitize;
+ if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+ u32 *initrd_header;
- /*
- * See if initrd has been added to the kernel image by
- * arch/mips/boot/addinitrd.c. In that case a header is
- * prepended to initrd and is made up by 8 bytes. The fisrt
- * word is a magic number and the second one is the size of
- * initrd. Initrd start must be page aligned in any cases.
- */
- initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
- if (initrd_header[0] != 0x494E5244)
+ /*
+ * See if initrd has been added to the kernel image by
+ * arch/mips/boot/addinitrd.c. In that case a header is
+ * prepended to initrd and is made up by 8 bytes. The first
+ * word is a magic number and the second one is the size of
+ * initrd. Initrd start must be page aligned in any cases.
+ */
+ initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+ if (initrd_header[0] != 0x494E5244)
+ goto disable;
+ initrd_start = (unsigned long)(initrd_header + 2);
+ initrd_end = initrd_start + initrd_header[1];
+#else
goto disable;
- initrd_start = (unsigned long)(initrd_header + 2);
- initrd_end = initrd_start + initrd_header[1];
+#endif
+ }
-sanitize:
if (initrd_start & ~PAGE_MASK) {
pr_err("initrd start must be page aligned\n");
goto disable;
do_exit(SIGSEGV);
}
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
__asm__(
" .section __dbe_table, \"a\"\n"
if (n == 0 && cpu_has_divec) {
*(u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(ebase + 0x200, ebase + 0x204);
+ local_flush_icache_range(ebase + 0x200, ebase + 0x204);
}
return (void *)old_handler;
}
*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
w = (u32 *)(b + ori_offset);
*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
- flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+handler_len));
}
else {
/*
w = (u32 *)b;
*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
*w = 0;
- flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+8));
}
return (void *)old_handler;
void __init set_handler(unsigned long offset, void *addr, unsigned long size)
{
memcpy((void *)(ebase + offset), addr, size);
- flush_icache_range(ebase + offset, ebase + offset + size);
+ local_flush_icache_range(ebase + offset, ebase + offset + size);
}
static char panic_null_cerr[] __cpuinitdata =
signal32_init();
#endif
- flush_icache_range(ebase, ebase + 0x400);
+ local_flush_icache_range(ebase, ebase + 0x400);
flush_tlb_handlers();
+
+ sort_extable(__start___dbe_table, __stop___dbe_table);
}
flush_cache_range = r3k_flush_cache_range;
flush_cache_page = r3k_flush_cache_page;
flush_icache_range = r3k_flush_icache_range;
+ local_flush_icache_range = r3k_flush_icache_range;
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
local_flush_data_cache_page = local_r3k_flush_data_cache_page;
unsigned long end;
};
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
{
- struct flush_icache_range_args *fir_args = args;
- unsigned long start = fir_args->start;
- unsigned long end = fir_args->end;
-
if (!cpu_has_ic_fills_f_dc) {
if (end - start >= dcache_size) {
r4k_blast_dcache();
protected_blast_icache_range(start, end);
}
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+ struct flush_icache_range_args *fir_args = args;
+ unsigned long start = fir_args->start;
+ unsigned long end = fir_args->end;
+
+ local_r4k_flush_icache_range(start, end);
+}
+
static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
struct flush_icache_range_args args;
args.start = start;
args.end = end;
- r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
instruction_hazard();
}
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
+ local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT)
if (coherentio) {
flush_cache_range = (void *) tx39h_flush_icache_all;
flush_cache_page = (void *) tx39h_flush_icache_all;
flush_icache_range = (void *) tx39h_flush_icache_all;
+ local_flush_icache_range = (void *) tx39h_flush_icache_all;
flush_cache_sigtramp = (void *) tx39h_flush_icache_all;
local_flush_data_cache_page = (void *) tx39h_flush_icache_all;
flush_cache_range = tx39_flush_cache_range;
flush_cache_page = tx39_flush_cache_page;
flush_icache_range = tx39_flush_icache_range;
+ local_flush_icache_range = tx39_flush_icache_range;
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
local_flush_data_cache_page = local_tx39_flush_data_cache_page;
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
void __cpuinit flush_tlb_handlers(void)
{
- flush_icache_range((unsigned long)handle_tlbl,
+ local_flush_icache_range((unsigned long)handle_tlbl,
(unsigned long)handle_tlbl + sizeof(handle_tlbl));
- flush_icache_range((unsigned long)handle_tlbs,
+ local_flush_icache_range((unsigned long)handle_tlbs,
(unsigned long)handle_tlbs + sizeof(handle_tlbs));
- flush_icache_range((unsigned long)handle_tlbm,
+ local_flush_icache_range((unsigned long)handle_tlbm,
(unsigned long)handle_tlbm + sizeof(handle_tlbm));
}
txx9_ce_res[i].name = txx9_ce_res_name[i];
}
+ txx9_pcode = pcode;
sprintf(txx9_pcode_str, "TX%x", pcode);
if (base) {
txx9_reg_res.start = base & 0xfffffffffULL;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_RTC_DRV_SH=y
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
+extern long __strnlen_user(const char *__s, long __n);
+
#endif /* __ASM_SH_UACCESS_64_H */
* arch/sh/kernel/cpu/sh5/entry.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 - 2007 Paul Mundt
+ * Copyright (C) 2004 - 2008 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
blink tr0, ZERO
resume_kernel:
+ CLI()
+
pta restore_all, tr0
getcon KCR0, r6
andi r7, 0xf0, r7
bne r7, ZERO, tr0
- movi ((PREEMPT_ACTIVE >> 16) & 65535), r8
- shori (PREEMPT_ACTIVE & 65535), r8
- st.l r6, TI_PRE_COUNT, r8
-
- STI()
- movi schedule, r7
+ movi preempt_schedule_irq, r7
ori r7, 1, r7
ptabs r7, tr1
blink tr1, LINK
- st.l r6, TI_PRE_COUNT, ZERO
- CLI()
-
pta need_resched, tr1
blink tr1, ZERO
#endif
bra resume_userspace
nop
ENTRY(resume_kernel)
+ cli
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
-
- mov.l 1f, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 3f, r0
- jsr @r0
- nop
-#endif
- sti
- mov.l 2f, r0
- jsr @r0
- nop
- mov #0, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
- cli
-#ifdef CONFIG_TRACE_IRQFLAGS
- mov.l 4f, r0
- jsr @r0
+ jsr @r0 ! call preempt_schedule_irq
nop
-#endif
-
bra need_resched
nop
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3: .long trace_hardirqs_on
-4: .long trace_hardirqs_off
-#endif
+3: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+ (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
}
void arch_crash_save_vmcoreinfo(void)
void user_disable_single_step(struct task_struct *child)
{
+ struct pt_regs *regs = child->thread.uregs;
+
regs->sr &= ~SR_SSTEP;
}
(unsigned long)(free_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
}
}
#else
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- request_resource(res, &crashk_res);
-#endif
-
add_active_range(nid, start_pfn, end_pfn);
}
version = call >> 16; /* hack for backward compatibility */
call &= 0xffff;
- if (call <= SEMCTL)
+ if (call <= SEMTIMEDOP)
switch (call) {
case SEMOP:
return sys_semtimedop(first,
}
__setup("memchunk.", memchunk_setup);
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
{
char *p = boot_command_line;
int k = strlen(name);
}
}
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+ char *name, unsigned long memsize)
{
struct resource *r;
dma_addr_t dma_handle;
DMI_MATCH(DMI_BOARD_NAME, "30BF")
}
},
+ {
+ .callback = dmi_io_delay_0xed_port,
+ .ident = "Presario F700",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30D3")
+ }
+ },
{ }
};
*/
if (tsc_pit_min == ULONG_MAX) {
/* PIT gave no useful value */
- printk(KERN_WARNING "TSC: PIT calibration failed due to "
- "SMI disturbance.\n");
+ printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
/* We don't have an alternative source, disable TSC */
if (!hpet && !pm1 && !pm2) {
spin_lock_bh(&next->lock);
next->parent = NULL;
_next = next->next;
- next->next = NULL;
+ if (_next && _next->chan == chan)
+ next->next = NULL;
spin_unlock_bh(&next->lock);
next->tx_submit(next);
arg = arg->common.next;
}
- ACPI_ERROR((AE_INFO,
+ ACPI_WARNING((AE_INFO,
"Package List length (%X) larger than NumElements count (%X), truncated\n",
i, element_count));
} else if (i < element_count) {
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
if (wait_event_timeout(hc->wait, smb_check_done(hc),
msecs_to_jiffies(timeout)))
return 0;
+ /*
+ * After the timeout happens, OS will try to check the status of SMbus.
+ * If the status is what OS expected, it will be regarded as the bogus
+ * timeout.
+ */
+ if (smb_check_done(hc))
+ return 0;
else
return -ETIME;
}
static int __init acpi_parse_apic_instance(char *str)
{
+ if (!str)
+ return -EINVAL;
acpi_apic_instance = simple_strtoul(str, NULL, 0);
#include <linux/clk.h>
#include <linux/io.h>
+/* Transmit operation: */
+/* */
+/* 0 byte transmit */
+/* BUS: S A8 ACK P */
+/* IRQ: DTE WAIT */
+/* ICIC: */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 */
+/* */
+/* 1 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK P */
+/* IRQ: DTE WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) */
+/* */
+/* 2 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) D8(2) */
+/* */
+/* 3 bytes or more, +---------+ gets repeated */
+/* */
+/* */
+/* Receive operation: */
+/* */
+/* 0 byte receive - not supported since slave may hold SDA low */
+/* */
+/* 1 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK P */
+/* IRQ: DTE WAIT | WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) */
+/* */
+/* 2 byte receive [TX]| [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) */
+/* */
+/* 3 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) D8(3) */
+/* */
+/* 4 bytes or more, this part is repeated +---------+ */
+/* */
+/* */
+/* Interrupt order and BUSY flag */
+/* ___ _ */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
+/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
+/* */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* ___ */
+/* WAIT IRQ ________________________________/ \___________ */
+/* TACK IRQ ____________________________________/ \_______ */
+/* DTE IRQ __________________________________________/ \_ */
+/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+/* _______________________________________________ */
+/* BUSY __/ \_ */
+/* */
+
enum sh_mobile_i2c_op {
OP_START = 0,
- OP_TX_ONLY,
+ OP_TX_FIRST,
+ OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
- OP_RX_ONLY,
+ OP_RX,
OP_RX_STOP,
+ OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
- case OP_START:
+ case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
- case OP_TX_ONLY:
+ case OP_TX_FIRST: /* disable DTE interrupt and write data */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
- case OP_TX_STOP:
+ case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
- iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
- case OP_TX_TO_RX:
+ case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
+ iowrite8(0x90, ICCR(pd));
+ break;
+ case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
- case OP_RX_ONLY:
+ case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
- case OP_RX_STOP:
+ case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
+ iowrite8(0xc0, ICCR(pd));
+ break;
+ case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
return ret;
}
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == -1)
+ return 1;
+
+ return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == (pd->msg->len - 1))
+ return 1;
+
+ return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+ unsigned char *buf)
+{
+ switch (pd->pos) {
+ case -1:
+ *buf = (pd->msg->addr & 0x7f) << 1;
+ *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ break;
+ default:
+ *buf = pd->msg->buf[pd->pos];
+ }
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+
+ if (pd->pos == pd->msg->len)
+ return 1;
+
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_last_byte(pd))
+ i2c_op(pd, OP_TX_STOP, data);
+ else if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+
+ pd->pos++;
+ return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+ int real_pos;
+
+ do {
+ if (pd->pos <= -1) {
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+ break;
+ }
+
+ if (pd->pos == 0) {
+ i2c_op(pd, OP_TX_TO_RX, 0);
+ break;
+ }
+
+ real_pos = pd->pos - 2;
+
+ if (pd->pos == pd->msg->len) {
+ if (real_pos < 0) {
+ i2c_op(pd, OP_RX_STOP, 0);
+ break;
+ }
+ data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+ } else
+ data = i2c_op(pd, OP_RX, 0);
+
+ pd->msg->buf[real_pos] = data;
+ } while (0);
+
+ pd->pos++;
+ return pd->pos == (pd->msg->len + 2);
+}
+
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
- struct i2c_msg *msg = pd->msg;
- unsigned char data, sr;
- int wakeup = 0;
+ unsigned char sr;
+ int wakeup;
sr = ioread8(ICSR(pd));
- pd->sr |= sr;
+ pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
- (msg->flags & I2C_M_RD) ? "read" : "write",
- pd->pos, msg->len);
+ (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+ pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
- iowrite8(0, ICIC(pd)); /* disable interrupts */
- wakeup = 1;
- goto do_wakeup;
- }
+ /* don't interrupt transaction - continue to issue stop */
+ iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ wakeup = 0;
+ } else if (pd->msg->flags & I2C_M_RD)
+ wakeup = sh_mobile_i2c_isr_rx(pd);
+ else
+ wakeup = sh_mobile_i2c_isr_tx(pd);
- if (pd->pos == msg->len) {
- i2c_op(pd, OP_RX_ONLY, 0);
- wakeup = 1;
- goto do_wakeup;
- }
+ if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+ iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
- if (pd->pos == -1) {
- data = (msg->addr & 0x7f) << 1;
- data |= (msg->flags & I2C_M_RD) ? 1 : 0;
- } else
- data = msg->buf[pd->pos];
-
- if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
- if (msg->flags & I2C_M_RD)
- i2c_op(pd, OP_TX_TO_RX, data);
- else if (pd->pos == (msg->len - 1)) {
- i2c_op(pd, OP_TX_STOP, data);
- wakeup = 1;
- } else
- i2c_op(pd, OP_TX_ONLY, data);
- } else {
- if (pd->pos == (msg->len - 1))
- data = i2c_op(pd, OP_RX_STOP, 0);
- else
- data = i2c_op(pd, OP_RX_ONLY, 0);
-
- msg->buf[pd->pos] = data;
- }
- pd->pos++;
-
- do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
+ if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+ dev_err(pd->dev, "Unsupported zero length i2c read\n");
+ return -EIO;
+ }
+
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
pd->pos = -1;
pd->sr = 0;
- /* Enable all interrupts except wait */
- iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
- ICIC(pd));
+ /* Enable all interrupts to begin with */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
- retry_count = 10;
+ retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
- if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
- err = -EIO;
- break;
- }
-
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
-
- if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
- (val & ICSR_SDAM))) {
- msleep(1);
+ if (val & ICSR_BUSY) {
+ udelay(10);
if (retry_count--)
goto again;
dev_err(pd->dev, "Polling timed out\n");
break;
}
+
+ /* handle missing acknowledge and arbitration lost */
+ if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+ err = -EIO;
+ break;
+ }
}
deactivate_ch(pd);
{
v4l2_std_id *id = arg;
int found = 0;
- int i, err;
+ int i;
DEB_EE(("VIDIOC_S_STD\n"));
case VIDIOC_OVERLAY:
{
int on = *(int *)arg;
- int err = 0;
DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
if (on != 0) {
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
- struct videobuf_queue *q;
int i;
/* fixme: number of capture buffers and sizes for v4l apps */
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
Functions:
mxl5005s_reset()
mxl5005s_writereg()
/* ----------------------------------------------------------------
* Begin: Everything after here is new code to adapt the
* proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
*/
static int mxl5005s_reset(struct dvb_frontend *fe)
{
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static int simple_config_lookup(struct dvb_frontend *fe,
struct tuner_params *t_params,
- int *frequency, u8 *config, u8 *cb)
+ unsigned *frequency, u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
int i;
priv->last_div = div;
if (t_params->has_tda9887) {
struct v4l2_priv_tun_config tda9887_cfg;
- int config = 0;
+ int tda_config = 0;
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC)) &&
!(params->std & ~(V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC));
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &config;
+ tda9887_cfg.priv = &tda_config;
if (params->std == V4L2_STD_SECAM_LC) {
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
} else {
if (t_params->port1_active)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
}
if (t_params->intercarrier_mode)
- config |= TDA9887_INTERCARRIER;
+ tda_config |= TDA9887_INTERCARRIER;
if (is_secam_l) {
if (i == 0 && t_params->default_top_secam_low)
- config |= TDA9887_TOP(t_params->default_top_secam_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
else if (i == 1 && t_params->default_top_secam_mid)
- config |= TDA9887_TOP(t_params->default_top_secam_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
else if (t_params->default_top_secam_high)
- config |= TDA9887_TOP(t_params->default_top_secam_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
} else {
if (i == 0 && t_params->default_top_low)
- config |= TDA9887_TOP(t_params->default_top_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_low);
else if (i == 1 && t_params->default_top_mid)
- config |= TDA9887_TOP(t_params->default_top_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_mid);
else if (t_params->default_top_high)
- config |= TDA9887_TOP(t_params->default_top_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_high);
}
if (t_params->default_pll_gating_18)
- config |= TDA9887_GATING_18;
+ tda_config |= TDA9887_GATING_18;
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
&tda9887_cfg);
}
static struct tuner_params *t_params;
u8 config, cb;
u32 div;
- int ret, frequency = params->frequency / 62500;
+ int ret;
+ unsigned frequency = params->frequency / 62500;
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
* Copyright (c) 2007 Xceive Corporation
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
flexcop_diseqc_send_byte(fe, 0xff);
else {
flexcop_set_tone(fe, SEC_TONE_ON);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
flexcop_set_tone(fe, SEC_TONE_OFF);
}
msleep(20);
fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
- strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
- "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
- "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
- "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+ strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
goto error;
}
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
if (read_dst(state, &reply, GET_ACK)) {
dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
goto error;
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
else
udelay(2000);
if (!dst_wait_dst_ready(state, NO_DELAY))
struct timespec timeout = { 0 };
struct dmx_pes_filter_params *para = &filter->params.pes;
dmx_output_t otype;
- int ret;
int ts_type;
enum dmx_ts_pes ts_pes;
struct dmx_ts_feed **tsfeed = &filter->feed.ts;
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
* initialization, so parg is 8 bits and does not
* include the initialization or start bit
*/
- unsigned long cmd = ((unsigned long) parg) << 1;
+ unsigned long swcmd = ((unsigned long) parg) << 1;
struct timeval nexttime;
struct timeval tv[10];
int i;
u8 last = 1;
if (dvb_frontend_debug)
- printk("%s switch command: 0x%04lx\n", __func__, cmd);
+ printk("%s switch command: 0x%04lx\n", __func__, swcmd);
do_gettimeofday(&nexttime);
if (dvb_frontend_debug)
memcpy(&tv[0], &nexttime, sizeof(struct timeval));
for (i = 0; i < 9; i++) {
if (dvb_frontend_debug)
do_gettimeofday(&tv[i + 1]);
- if ((cmd & 0x01) != last) {
+ if ((swcmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
last = (last) ? 0 : 1;
}
- cmd = cmd >> 1;
+ swcmd = swcmd >> 1;
if (i != 8)
dvb_frontend_sleep_until(&nexttime, 8000);
}
if (d->state == DVB_USB_STATE_INIT &&
usb_set_interface(d->udev, 0, 0) < 0)
err("set interface failed");
- do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+ do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
if (!ret) {
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
- { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
}
},
- .num_device_descs = 3,
+ .num_device_descs = 4,
.devices = {
{ "DiBcom STK7070PD reference design",
{ &dib0700_usb_id_table[17], NULL },
{ "Hauppauge Nova-TD Stick (52009)",
{ &dib0700_usb_id_table[35], NULL },
{ NULL },
+ },
+ { "Hauppauge Nova-TD-500 (84xxx)",
+ { &dib0700_usb_id_table[36], NULL },
+ { NULL },
}
}
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
return ret;
}
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ u8 r0b5, r0b6, r0b7;
+ char *ifmhz;
+
+ switch (if_freq) {
+ case AU8522_IF_3_25MHZ:
+ ifmhz = "3.25";
+ r0b5 = 0x00;
+ r0b6 = 0x3d;
+ r0b7 = 0xa0;
+ break;
+ case AU8522_IF_4MHZ:
+ ifmhz = "4.00";
+ r0b5 = 0x00;
+ r0b6 = 0x4b;
+ r0b7 = 0xd9;
+ break;
+ case AU8522_IF_6MHZ:
+ ifmhz = "6.00";
+ r0b5 = 0xfb;
+ r0b6 = 0x8e;
+ r0b7 = 0x39;
+ break;
+ default:
+ dprintk("%s() IF Frequency not supported\n", __func__);
+ return -EINVAL;
+ }
+ dprintk("%s() %s MHz\n", __func__, ifmhz);
+ au8522_writereg(state, 0x80b5, r0b5);
+ au8522_writereg(state, 0x80b6, r0b6);
+ au8522_writereg(state, 0x80b7, r0b7);
+
+ return 0;
+}
+
/* VSB Modulation table */
static struct {
u16 reg;
{ 0x80af, 0x66 },
{ 0x821b, 0xcc },
{ 0x821d, 0x80 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80a4, 0xe8 },
{ 0x8231, 0x13 },
};
{ 0x80a4, 0x00 },
{ 0x8081, 0xc4 },
{ 0x80a5, 0x40 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80aa, 0x77 },
{ 0x80ad, 0x77 },
{ 0x80a6, 0x67 },
au8522_writereg(state,
VSB_mod_tab[i].reg,
VSB_mod_tab[i].data);
+ au8522_set_if(fe, state->config->vsb_if);
break;
case QAM_64:
case QAM_256:
au8522_writereg(state,
QAM_mod_tab[i].reg,
QAM_mod_tab[i].data);
+ au8522_set_if(fe, state->config->qam_if);
break;
default:
dprintk("%s() Invalid modulation\n", __func__);
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/dvb/frontend.h>
+enum au8522_if_freq {
+ AU8522_IF_6MHZ = 0,
+ AU8522_IF_4MHZ,
+ AU8522_IF_3_25MHZ,
+};
+
struct au8522_config {
/* the demodulator's i2c address */
u8 demod_address;
#define AU8522_TUNERLOCKING 0
#define AU8522_DEMODLOCKING 1
u8 status_mode;
+
+ enum au8522_if_freq vsb_if;
+ enum au8522_if_freq qam_if;
};
#if defined(CONFIG_DVB_AU8522) || \
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
* Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
*
- * Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
*
* Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
*
if (config->dont_use_pll)
cx24123_repeater_mode(state, 1, 0);
- strncpy(state->tuner_i2c_adapter.name,
- "CX24123 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
- Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
if (state->if_freq != S5H1409_QAM_IF_FREQ)
s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
s5h1411_set_if_freq(fe, state->config->qam_if);
s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
state->frontend.demodulator_priv = state;
/* create tuner i2c adapter */
- strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
- return -EIO;
+ ret = -EIO;
} else {
printk(KERN_INFO "%s: firmware uploading\n", __func__);
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
# Makefile for the kernel character device drivers.
#
-miropcm20-objs := miropcm20-rds-core.o miropcm20-radio.o
-
obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o
-obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o
obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
radio->usbdev = interface_to_usbdev(intf);
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
warn("Could not register video device");
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
+++ /dev/null
-/* Miro PCM20 radio driver for Linux radio support
- * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * Thanks to Norberto Pellici for the ACI device interface specification
- * The API part is based on the radiotrack driver by M. Kirkwood
- * This driver relies on the aci mixer (drivers/sound/aci.c)
- * Look there for further info...
- */
-
-/* Revision history:
- *
- * 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * 2000-09-05 Robert Siemer <Robert.Siemer@gmx.de>
- * removed unfinished volume control (maybe adding it later again)
- * use OSS-mixer; added stereo control
- */
-
-/* What ever you think about the ACI, version 0x07 is not very well!
- * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions... Robert
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-struct pcm20_device {
- unsigned long freq;
- int muted;
- int stereo;
-};
-
-
-static int pcm20_mute(struct pcm20_device *dev, unsigned char mute)
-{
- dev->muted = mute;
- return aci_write_cmd(ACI_SET_TUNERMUTE, mute);
-}
-
-static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo)
-{
- dev->stereo = stereo;
- return aci_write_cmd(ACI_SET_TUNERMONO, !stereo);
-}
-
-static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq)
-{
- unsigned char freql;
- unsigned char freqh;
-
- dev->freq=freq;
-
- freq /= 160;
- if (!(aci_version==0x07 || aci_version>=0xb0))
- freq /= 10; /* I don't know exactly which version
- * needs this hack */
- freql = freq & 0xff;
- freqh = freq >> 8;
-
- aci_rds_cmd(RDS_RESET, NULL, 0);
- pcm20_stereo(dev, 1);
-
- return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh);
-}
-
-static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal)
-{
- /* okay, check for signal, stereo and rds here... */
- int i;
- unsigned char buf;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0)
- return i;
- pr_debug("check_sig: 0x%x\n", i);
- if (i & 0x80) {
- /* no signal from tuner */
- *flags=0;
- *signal=0;
- return 0;
- } else
- *signal=0xffff;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0)
- return i;
- if (i & 0x40) {
- *flags=0;
- } else {
- /* stereo */
- *flags=VIDEO_TUNER_STEREO_ON;
- /* I can't see stereo, when forced to mono */
- dev->stereo=1;
- }
-
- if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0)
- return i;
- if (buf & 1)
- /* RDS available */
- *flags|=VIDEO_TUNER_RDS_ON;
- else
- return 0;
-
- if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0)
- return i;
- pr_debug("rds-signal: %d\n", buf);
- if (buf > 15) {
- printk("miropcm20-radio: RX strengths unexpected high...\n");
- buf=15;
- }
- /* refine signal */
- if ((*signal=SCALE(15, 0xffff, buf))==0)
- *signal = 1;
-
- return 0;
-}
-
-static int pcm20_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- struct video_device *dev = video_devdata(file);
- struct pcm20_device *pcm20 = dev->priv;
- int i;
-
- switch(cmd)
- {
- case VIDIOCGCAP:
- {
- struct video_capability *v = arg;
- memset(v,0,sizeof(*v));
- v->type=VID_TYPE_TUNER;
- strcpy(v->name, "Miro PCM20");
- v->channels=1;
- v->audios=1;
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
- return -EINVAL;
- v->rangelow=87*16000;
- v->rangehigh=108*16000;
- pcm20_getflags(pcm20, &v->flags, &v->signal);
- v->flags|=VIDEO_TUNER_LOW;
- v->mode=VIDEO_MODE_AUTO;
- strcpy(v->name, "FM");
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner!=0)
- return -EINVAL;
- /* Only 1 tuner so no setting needed ! */
- return 0;
- }
- case VIDIOCGFREQ:
- {
- unsigned long *freq = arg;
- *freq = pcm20->freq;
- return 0;
- }
- case VIDIOCSFREQ:
- {
- unsigned long *freq = arg;
- pcm20->freq = *freq;
- i=pcm20_setfreq(pcm20, pcm20->freq);
- pr_debug("First view (setfreq): 0x%x\n", i);
- return i;
- }
- case VIDIOCGAUDIO:
- {
- struct video_audio *v = arg;
- memset(v,0, sizeof(*v));
- v->flags=VIDEO_AUDIO_MUTABLE;
- if (pcm20->muted)
- v->flags|=VIDEO_AUDIO_MUTE;
- v->mode=VIDEO_SOUND_STEREO;
- if (pcm20->stereo)
- v->mode|=VIDEO_SOUND_MONO;
- /* v->step=2048; */
- strcpy(v->name, "Radio");
- return 0;
- }
- case VIDIOCSAUDIO:
- {
- struct video_audio *v = arg;
- if(v->audio)
- return -EINVAL;
-
- pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
- if(v->flags&VIDEO_SOUND_MONO)
- pcm20_stereo(pcm20, 0);
- if(v->flags&VIDEO_SOUND_STEREO)
- pcm20_stereo(pcm20, 1);
-
- return 0;
- }
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int pcm20_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl);
-}
-
-static struct pcm20_device pcm20_unit = {
- .freq = 87*16000,
- .muted = 1,
-};
-
-static const struct file_operations pcm20_fops = {
- .owner = THIS_MODULE,
- .open = video_exclusive_open,
- .release = video_exclusive_release,
- .ioctl = pcm20_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = v4l_compat_ioctl32,
-#endif
- .llseek = no_llseek,
-};
-
-static struct video_device pcm20_radio = {
- .name = "Miro PCM 20 radio",
- .fops = &pcm20_fops,
- .priv = &pcm20_unit
-};
-
-static int __init pcm20_init(void)
-{
- if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- goto video_register_device;
-
- if(attach_aci_rds()<0)
- goto attach_aci_rds;
-
- printk(KERN_INFO "Miro PCM20 radio card driver.\n");
-
- return 0;
-
- attach_aci_rds:
- video_unregister_device(&pcm20_radio);
- video_register_device:
- return -EINVAL;
-}
-
-MODULE_AUTHOR("Ruurd Reitsma");
-MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
-MODULE_LICENSE("GPL");
-
-static void __exit pcm20_cleanup(void)
-{
- unload_aci_rds();
- video_unregister_device(&pcm20_radio);
-}
-
-module_init(pcm20_init);
-module_exit(pcm20_cleanup);
+++ /dev/null
-/*
- * Many thanks to Fred Seidel <seidel@metabox.de>, the
- * designer of the RDS decoder hardware. With his help
- * I was able to code this driver.
- * Thanks also to Norberto Pellicci, Dominic Mounteney
- * <DMounteney@pinnaclesys.com> and www.teleauskunft.de
- * for good hints on finding Fred. It was somewhat hard
- * to locate him here in Germany... [:
- *
- * Revision history:
- *
- * 2000-08-09 Robert Siemer <Robert.Siemer@gmx.de>
- * RDS support for MiroSound PCM20 radio
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-#define DEBUG 0
-
-static struct mutex aci_rds_mutex;
-
-#define RDS_DATASHIFT 2 /* Bit 2 */
-#define RDS_DATAMASK (1 << RDS_DATASHIFT)
-#define RDS_BUSYMASK 0x10 /* Bit 4 */
-#define RDS_CLOCKMASK 0x08 /* Bit 3 */
-
-#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1)
-
-
-#if DEBUG
-static void print_matrix(char array[], unsigned int length)
-{
- int i, j;
-
- for (i=0; i<length; i++) {
- printk(KERN_DEBUG "aci-rds: ");
- for (j=7; j>=0; j--) {
- printk("%d", (array[i] >> j) & 0x1);
- }
- if (i%8 == 0)
- printk(" byte-border\n");
- else
- printk("\n");
- }
-}
-#endif /* DEBUG */
-
-static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size)
-{
- int i;
-
- if (size != 8)
- return -1;
- for (i = 7; i >= 0; i--)
- sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
- sendbuffer[0] |= RDS_CLOCKMASK;
-
- return 0;
-}
-
-static int rds_waitread(void)
-{
- unsigned char byte;
- int i=2000;
-
- do {
- byte=inb(RDS_REGISTER);
- i--;
- }
- while ((byte & RDS_BUSYMASK) && i);
-
- if (i) {
- #if DEBUG
- printk(KERN_DEBUG "rds_waitread()");
- print_matrix(&byte, 1);
- #endif
- return (byte);
- } else {
- printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n");
- return -1;
- }
-}
-
-/* don't use any ..._nowait() function if you are not sure what you do... */
-
-static inline void rds_rawwrite_nowait(unsigned char byte)
-{
- #if DEBUG
- printk(KERN_DEBUG "rds_rawwrite()");
- print_matrix(&byte, 1);
- #endif
- outb(byte, RDS_REGISTER);
-}
-
-static int rds_rawwrite(unsigned char byte)
-{
- if (rds_waitread() >= 0) {
- rds_rawwrite_nowait(byte);
- return 0;
- } else
- return -1;
-}
-
-static int rds_write(unsigned char cmd)
-{
- unsigned char sendbuffer[8];
- int i;
-
- if (byte2trans(cmd, sendbuffer, 8) != 0){
- return -1;
- } else {
- for (i=0; i<8; i++) {
- rds_rawwrite(sendbuffer[i]);
- }
- }
- return 0;
-}
-
-static int rds_readcycle_nowait(void)
-{
- rds_rawwrite_nowait(0);
- return rds_waitread();
-}
-
-static int rds_readcycle(void)
-{
- if (rds_rawwrite(0) < 0)
- return -1;
- return rds_waitread();
-}
-
-static int rds_read(unsigned char databuffer[], int datasize)
-{
- #define READSIZE (8*datasize)
-
- int i,j;
-
- if (datasize < 1) /* nothing to read */
- return 0;
-
- /* to be able to use rds_readcycle_nowait()
- I have to waitread() here */
- if (rds_waitread() < 0)
- return -1;
-
- memset(databuffer, 0, datasize);
-
- for (i=0; i< READSIZE; i++)
- if((j=rds_readcycle_nowait()) < 0) {
- return -1;
- } else {
- databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8)));
- }
-
- return 0;
-}
-
-static int rds_ack(void)
-{
- int i=rds_readcycle();
-
- if (i < 0)
- return -1;
- if (i & RDS_DATAMASK) {
- return 0; /* ACK */
- } else {
- printk(KERN_DEBUG "aci-rds: NACK\n");
- return 1; /* NACK */
- }
-}
-
-int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
-{
- int ret;
-
- if (mutex_lock_interruptible(&aci_rds_mutex))
- return -EINTR;
-
- rds_write(cmd);
-
- /* RDS_RESET doesn't need further processing */
- if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize)))
- ret = -1;
- else
- ret = 0;
-
- mutex_unlock(&aci_rds_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(aci_rds_cmd);
-
-int __init attach_aci_rds(void)
-{
- mutex_init(&aci_rds_mutex);
- return 0;
-}
-
-void __exit unload_aci_rds(void)
-{
-}
-MODULE_LICENSE("GPL");
+++ /dev/null
-#ifndef _MIROPCM20_RDS_CORE_H_
-#define _MIROPCM20_RDS_CORE_H_
-
-extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize);
-
-#define RDS_STATUS 0x01
-#define RDS_STATIONNAME 0x02
-#define RDS_TEXT 0x03
-#define RDS_ALTFREQ 0x04
-#define RDS_TIMEDATE 0x05
-#define RDS_PI_CODE 0x06
-#define RDS_PTYTATP 0x07
-#define RDS_RESET 0x08
-#define RDS_RXVALUE 0x09
-
-extern void __exit unload_aci_rds(void);
-extern int __init attach_aci_rds(void);
-
-#endif /* _MIROPCM20_RDS_CORE_H_ */
+++ /dev/null
-/* MiroSOUND PCM20 radio rds interface driver
- * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
- * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information.
- */
-
-/* Revision history:
- *
- * 2001-04-18 Robert Siemer <Robert.Siemer@gmx.de>
- * separate file for user interface driver
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include "miropcm20-rds-core.h"
-
-static char * text_buffer;
-static int rds_users;
-
-
-static int rds_f_open(struct inode *in, struct file *fi)
-{
- if (rds_users)
- return -EBUSY;
-
- lock_kernel();
- rds_users++;
- if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) {
- rds_users--;
- printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n");
- unlock_kernel();
- return -ENOMEM;
- }
-
- unlock_kernel();
- return 0;
-}
-
-static int rds_f_release(struct inode *in, struct file *fi)
-{
- kfree(text_buffer);
-
- rds_users--;
- return 0;
-}
-
-static void print_matrix(char *ch, char out[])
-{
- int j;
-
- for (j=7; j>=0; j--) {
- out[7-j] = ((*ch >> j) & 0x1) + '0';
- }
-}
-
-static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-// i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset);
-
- char c;
- char bits[8];
-
- msleep(2000);
- aci_rds_cmd(RDS_STATUS, &c, 1);
- print_matrix(&c, bits);
- if (copy_to_user(buffer, bits, 8))
- return -EFAULT;
-
-/* if ((c >> 3) & 1) {
- aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8);
- text_buffer[0] = ' ' ;
- text_buffer[9] = '\n';
- return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18;
- }
-*/
-/* if ((c >> 6) & 1) {
- aci_rds_cmd(RDS_PTYTATP, &c, 1);
- if ( c & 1)
- sprintf(text_buffer, " M");
- else
- sprintf(text_buffer, " S");
- if ((c >> 1) & 1)
- sprintf(text_buffer+2, " TA");
- else
- sprintf(text_buffer+2, " --");
- if ((c >> 7) & 1)
- sprintf(text_buffer+5, " TP");
- else
- sprintf(text_buffer+5, " --");
- sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f);
- return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20;
- }
-*/
-
- if ((c >> 4) & 1) {
- aci_rds_cmd(RDS_TEXT, text_buffer, 65);
- text_buffer[0] = ' ' ;
- text_buffer[65] = '\n';
- return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8;
- } else {
- put_user('\n', buffer+8);
- return 9;
- }
-}
-
-static const struct file_operations rds_fops = {
- .owner = THIS_MODULE,
- .read = rds_f_read,
- .open = rds_f_open,
- .release = rds_f_release
-};
-
-static struct miscdevice rds_miscdev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "radiotext",
- .fops = &rds_fops,
-};
-
-static int __init miropcm20_rds_init(void)
-{
- return misc_register(&rds_miscdev);
-}
-
-static void __exit miropcm20_rds_cleanup(void)
-{
- misc_deregister(&rds_miscdev);
-}
-
-module_init(miropcm20_rds_init);
-module_exit(miropcm20_rds_cleanup);
-MODULE_LICENSE("GPL");
rtrack_radio.priv=&rtrack_unit;
- if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
- if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
}
if (!request_region(io,2,"cadet"))
goto fail;
- if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) {
+ if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
goto fail;
}
}
*devradio = vdev_template;
- if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) {
+ if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) {
kfree( devradio );
goto err_video;
}
gemtek_radio.priv = &gemtek_unit;
- if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
- radio_nr) == -1) {
+ if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 1);
return -EBUSY;
}
video_set_drvdata(maestro_radio_inst, radio_unit);
pci_set_drvdata(pdev, maestro_radio_inst);
- retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO,
- radio_nr);
+ retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr);
if (retval) {
printk(KERN_ERR "can't register video device!\n");
goto errfr1;
{
unsigned long int si;
int bl;
- int data = FREQ2BITS(freq);
+ int val = FREQ2BITS(freq);
/* TEA5757 shift register bits (see pdf) */
- outbit(0,io); // 24 search
- outbit(1,io); // 23 search up/down
+ outbit(0, io); /* 24 search */
+ outbit(1, io); /* 23 search up/down */
- outbit(0,io); // 22 stereo/mono
+ outbit(0, io); /* 22 stereo/mono */
- outbit(0,io); // 21 band
- outbit(0,io); // 20 band (only 00=FM works I think)
+ outbit(0, io); /* 21 band */
+ outbit(0, io); /* 20 band (only 00=FM works I think) */
- outbit(0,io); // 19 port ?
- outbit(0,io); // 18 port ?
+ outbit(0, io); /* 19 port ? */
+ outbit(0, io); /* 18 port ? */
- outbit(0,io); // 17 search level
- outbit(0,io); // 16 search level
+ outbit(0, io); /* 17 search level */
+ outbit(0, io); /* 16 search level */
si = 0x8000;
- for (bl = 1; bl <= 16 ; bl++) {
- outbit(data & si,io);
- si >>=1;
+ for (bl = 1; bl <= 16; bl++) {
+ outbit(val & si, io);
+ si >>= 1;
}
dprintk(1, "Radio freq set to %d.%02d MHz\n",
mutex_init(&radio_unit.lock);
maxiradio_radio.priv = &radio_unit;
- if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
+ if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
printk("radio-maxiradio: can't register device!");
goto err_out_free_region;
}
rtrack2_radio.priv=&rtrack2_unit;
spin_lock_init(&lock);
- if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 4);
return -EINVAL;
}
mutex_init(&lock);
- if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
+ if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
INIT_DELAYED_WORK(&radio->work, si470x_work);
/* register video device */
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) {
- retval = -EIO;
+ retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (retval) {
printk(KERN_WARNING DRIVER_NAME
": Could not register video device\n");
goto err_all;
spin_lock_init(&lock);
- if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
printk(KERN_ERR "trust: port 0x%x already in use\n", io);
return -EBUSY;
}
- if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
return -EBUSY;
}
- if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
- {
+ if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
endif
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
obj-$(CONFIG_TUNER_3036) += tuner-3036.o
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Auvitek's USB device.
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
},
+ [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+ .name = "Hauppauge Woodbury",
+ },
};
/* Tuner callback function for au0828 boards. Currently only needed
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
if (dev->i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xa0);
break;
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
/* GPIO's
* 4 - CS5340
* 5 - AU8522 Demodulator
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
{ USB_DEVICE(0x2040, 0x7281),
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+ { USB_DEVICE(0x2040, 0x8200),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
{ },
};
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define AU0828_BOARD_HAUPPAUGE_HVR850 2
#define AU0828_BOARD_DVICO_FUSIONHDTV7 3
#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
module_exit(au0828_exit);
MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "au8522.h"
#include "xc5000.h"
#include "mxl5007t.h"
+#include "tda18271.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_6MHZ,
+ .vsb_if = AU8522_IF_6MHZ,
+};
+
+static struct au8522_config hauppauge_woodbury_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_4MHZ,
+ .vsb_if = AU8522_IF_3_25MHZ,
};
static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
.if_freq_hz = MxL_IF_6_MHZ,
};
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
/*-------------------------------------------------------------------*/
static void urb_completion(struct urb *purb)
{
&dev->i2c_adap, 0x60,
&mxl5007t_hvr950q_config);
break;
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &hauppauge_woodbury_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL)
+ dvb_attach(tda18271_attach, dvb->frontend,
+ 0x60, &dev->i2c_adap,
+ &hauppauge_woodbury_tunerconfig);
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static void flyvideo_gpio(struct bttv *btv)
{
- int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
- int tuner=UNSET,ttype;
+ int gpio, has_remote, has_radio, is_capture_only;
+ int is_lr90, has_tda9820_tda9821;
+ int tuner_type = UNSET, ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
- ttype=(gpio&0x0f0000)>>16;
- switch(ttype) {
- case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+ ttype = (gpio & 0x0f0000) >> 16;
+ switch (ttype) {
+ case 0x0:
+ tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
break;
- case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+ case 0x2:
+ tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
break;
- case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+ case 0x4:
+ tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
- case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+ case 0x6:
+ tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
break;
- case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+ case 0xC:
+ tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ break;
}
has_remote = gpio & 0x800000;
/*
* gpio & 0x001000 output bit for audio routing */
- if(is_capture_only)
- tuner = TUNER_ABSENT; /* No tuner present */
+ if (is_capture_only)
+ tuner_type = TUNER_ABSENT; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+ btv->c.nr, has_radio ? "yes" : "no ",
+ has_remote ? "yes" : "no ", tuner_type, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
- is_capture_only?"yes":"no ");
+ btv->c.nr, is_lr90 ? "yes" : "no ",
+ has_tda9820_tda9821 ? "yes" : "no ",
+ is_capture_only ? "yes" : "no ");
- if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
- btv->tuner_type = tuner;
+ if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+ btv->tuner_type = tuner_type;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
- if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+ if (has_tda9820_tda9821)
+ btv->audio_mode_gpio = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
}
static void __devinit avermedia_eeprom(struct bttv *btv)
{
- int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+ int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
- if(tuner_format <=0x0a)
- tuner = tuner_0_table[tuner_format];
+ if (tuner_format <= 0x0a)
+ tuner_type = tuner_0_table[tuner_format];
if (tuner_make == 1)
- if(tuner_format <=9)
- tuner = tuner_1_table[tuner_format];
+ if (tuner_format <= 9)
+ tuner_type = tuner_1_table[tuner_format];
if (tuner_make == 4)
- if(tuner_format == 0x09)
- tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+ if (tuner_format == 0x09)
+ tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
- btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
- if(tuner) {
- btv->tuner_type=tuner;
- printk("%d",tuner);
+ btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+ if (tuner_type) {
+ btv->tuner_type = tuner_type;
+ printk(KERN_CONT "%d", tuner_type);
} else
- printk("Unknown type");
- printk(" radio:%s remote control:%s\n",
+ printk(KERN_CONT "Unknown type");
+ printk(KERN_CONT " radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
gpio_inout(mask,mask);
gpio_bits(mask,0);
- udelay(2500);
+ mdelay(2);
+ udelay(500);
gpio_bits(mask,mask);
if (bttv_gpio)
static unsigned int uv_ratio = 50;
static unsigned int full_luma_range;
static unsigned int coring;
-extern int no_overlay;
/* API features (turn on/off stuff for testing) */
static unsigned int v4l2 = 1;
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int dwords,rc,line,maxy,start,end,skip,nskips;
+ int dwords, rc, line, maxy, start, end;
+ unsigned skip, nskips;
struct btcx_skiplist *skips;
__le32 *rp;
u32 ri,ra;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);
+/* ---------------------------------------------------------- */
+/* bttv-cards.c */
+
+extern int no_overlay;
+
/* ---------------------------------------------------------- */
/* bttv-driver.c */
}
void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips)
{
unsigned int clip,skip;
- int end,maxline;
+ int end, maxline;
skip=0;
maxline = 9999;
int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
unsigned int n, int mask);
void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips);
printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
- if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
parport_unregister_device(qcam->pdev);
kfree(qcam);
return -ENODEV;
parport_release(qcam->pdev);
- if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
qcam->pport->name);
parport_unregister_device(qcam->pdev);
camera->lowlevel_data = lowlevel;
/* register v4l device */
- if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
kfree(camera);
printk(KERN_DEBUG "video_register_device failed\n");
return NULL;
if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
// Maximum 15fps
- int i;
for(i=0; i<c->maximum; ++i) {
if(framerate_controls[i].value ==
CPIA2_VP_FRAMERATE_15) {
reset_camera_struct_v4l(cam);
/* register v4l device */
- if (video_register_device
- (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
ERR("video_register_device failed\n");
video_device_release(cam->vdev);
return -ENODEV;
u32 v;
const u8 *ptr;
int i;
- int retries = 0;
+ int retries1 = 0;
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
CX18_ERR("unable to open firmware %s\n", FWFILE);
/* The firmware load often has byte errors, so allow for several
retries, both at byte level and at the firmware load level. */
- while (retries < 5) {
+ while (retries1 < 5) {
cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
for (i = 0; i < size; i++) {
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
u32 value = 0;
- int retries;
+ int retries2;
- for (retries = 0; retries < 5; retries++) {
+ for (retries2 = 0; retries2 < 5; retries2++) {
cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
udelay(10);
value = cx18_av_read4(cx, CXADEC_DL_CTL);
the address. We can only write the lower
address byte of the address. */
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
- retries = 5;
+ retries2 = 5;
break;
}
}
- if (retries >= 5)
+ if (retries2 >= 5)
break;
}
if (i == size)
break;
- retries++;
+ retries1++;
}
- if (retries >= 5) {
+ if (retries1 >= 5) {
CX18_ERR("unable to load firmware %s\n", FWFILE);
release_firmware(fw);
return -EIO;
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
CX18_WARN("Ack struct = %d for %s\n",
mb->args[2], s->name);
id = read_enc(off);
- buf = cx18_queue_find_buf(s, id, read_enc(off + 4));
+ buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
if (buf) {
cx18_buf_sync_for_cpu(s, buf);
return buf;
}
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused)
{
struct cx18 *cx = s->cx;
struct list_head *p;
+ spin_lock(&s->qlock);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf =
list_entry(p, struct cx18_buffer, list);
continue;
buf->bytesused = bytesused;
/* the transport buffers are handled differently,
- so there is no need to move them to the full queue */
- if (s->type == CX18_ENC_STREAM_TYPE_TS)
- return buf;
- s->q_free.buffers--;
- s->q_free.length -= s->buf_size;
- s->q_full.buffers++;
- s->q_full.length += s->buf_size;
- s->q_full.bytesused += buf->bytesused;
- list_move_tail(&buf->list, &s->q_full.list);
+ they are not moved to the full queue */
+ if (s->type != CX18_ENC_STREAM_TYPE_TS) {
+ s->q_free.buffers--;
+ s->q_free.length -= s->buf_size;
+ s->q_full.buffers++;
+ s->q_full.length += s->buf_size;
+ s->q_full.bytesused += buf->bytesused;
+ list_move_tail(&buf->list, &s->q_full.list);
+ }
+ spin_unlock(&s->qlock);
return buf;
}
+ spin_unlock(&s->qlock);
CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
return NULL;
}
-static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *to, int clear, int full)
-{
- struct cx18_buffer *buf =
- list_entry(from->list.next, struct cx18_buffer, list);
-
- list_move_tail(from->list.next, &to->list);
- from->buffers--;
- from->length -= s->buf_size;
- from->bytesused -= buf->bytesused - buf->readpos;
- /* special handling for q_free */
- if (clear)
- buf->bytesused = buf->readpos = buf->b_flags = 0;
- else if (full) {
- /* special handling for stolen buffers, assume
- all bytes are used. */
- buf->bytesused = s->buf_size;
- buf->readpos = buf->b_flags = 0;
- }
- to->buffers++;
- to->length += s->buf_size;
- to->bytesused += buf->bytesused - buf->readpos;
-}
-
-/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
- If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
- If 'steal' != NULL, then buffers may also taken from that queue if
- needed.
-
- The buffer is automatically cleared if it goes to the free queue. It is
- also cleared if buffers need to be taken from the 'steal' queue and
- the 'from' queue is the free queue.
-
- When 'from' is q_free, then needed_bytes is compared to the total
- available buffer length, otherwise needed_bytes is compared to the
- bytesused value. For the 'steal' queue the total available buffer
- length is always used.
-
- -ENOMEM is returned if the buffers could not be obtained, 0 if all
- buffers where obtained from the 'from' list and if non-zero then
- the number of stolen buffers is returned. */
-static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *steal, struct cx18_queue *to,
- int needed_bytes)
+/* Move all buffers of a queue to q_free, while flushing the buffers */
+static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
{
unsigned long flags;
- int rc = 0;
- int from_free = from == &s->q_free;
- int to_free = to == &s->q_free;
- int bytes_available;
-
- spin_lock_irqsave(&s->qlock, flags);
- if (needed_bytes == 0) {
- from_free = 1;
- needed_bytes = from->length;
- }
-
- bytes_available = from_free ? from->length : from->bytesused;
- bytes_available += steal ? steal->length : 0;
+ struct cx18_buffer *buf;
- if (bytes_available < needed_bytes) {
- spin_unlock_irqrestore(&s->qlock, flags);
- return -ENOMEM;
- }
- if (from_free) {
- u32 old_length = to->length;
+ if (q == &s->q_free)
+ return;
- while (to->length - old_length < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, 1, 0);
- }
- } else {
- u32 old_bytesused = to->bytesused;
-
- while (to->bytesused - old_bytesused < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, to_free, rc);
- }
+ spin_lock_irqsave(&s->qlock, flags);
+ while (!list_empty(&q->list)) {
+ buf = list_entry(q->list.next, struct cx18_buffer, list);
+ list_move_tail(q->list.next, &s->q_free.list);
+ buf->bytesused = buf->readpos = buf->b_flags = 0;
+ s->q_free.buffers++;
+ s->q_free.length += s->buf_size;
}
+ cx18_queue_init(q);
spin_unlock_irqrestore(&s->qlock, flags);
- return rc;
}
void cx18_flush_queues(struct cx18_stream *s)
{
- cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0);
- cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0);
+ cx18_queue_flush(s, &s->q_io);
+ cx18_queue_flush(s, &s->q_full);
}
int cx18_stream_alloc(struct cx18_stream *s)
s->name, s->buffers, s->buf_size,
s->buffers * s->buf_size / 1024);
- if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
- (char *)cx->scb) > SCB_RESERVED_SIZE) {
- unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
- ((char *)cx->scb->cpu_mdl));
+ if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+ (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+ unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+ ((char __iomem *)cx->scb->cpu_mdl));
CX18_ERR("Too many buffers, cannot fit in SCB area\n");
CX18_ERR("Max buffers = %zd\n",
void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
struct cx18_queue *q);
struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused);
void cx18_flush_queues(struct cx18_stream *s);
*
* (c) 2004 Jelle Foks <jelle@foks.8m.com>
* (c) 2004 Gerd Knorr <kraxel@bytesex.org>
- * (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * (c) 2008 Steven Toth <stoth@linuxtv.org>
* - CX23885/7/8 support
*
* Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "cx23885.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
static unsigned int debug;
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#endif
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/* ------------------------------------------------------------------ */
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
* with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
*
- * CX23885 support by Steven Toth <stoth@hauppauge.com>.
+ * CX23885 support by Steven Toth <stoth@linuxtv.org>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
cam->v4ldev->fops = &et61x251_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
video_set_drvdata(cam->v4ldev, cam);
init_completion(&cam->probe);
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
reg_w_val(gspca_dev, 0x0000, 0x00);
/* wait for completion */
retry = 50;
- while (retry--) {
+ do {
reg_r(gspca_dev, 0x0002, 1);
/* 0x07 until 0x00 */
if (gspca_dev->usb_buf[0] == 0x00)
break;
reg_w_val(gspca_dev, 0x0053, 0x00);
- }
+ } while (--retry);
if (retry == 0)
PDEBUG(D_ERR, "Damned Errors sending jpeg Table");
/* send the qtable now */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
cx11646_init1(gspca_dev);
cx11646_initsize(gspca_dev);
cx11646_jpeg(gspca_dev);
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
reg_w_val(gspca_dev, 0x00fc, 0xe0);
}
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+#define COLOR_IDX 2
{
{
.id = V4L2_CID_SATURATION,
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
} else {
cam->cam_mode = vga_mode;
cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+ gspca_dev->ctrl_dis = (1 << COLOR_IDX);
}
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
et_video(gspca_dev, 0); /* video off */
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_ET61X251
{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#endif
+#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE
{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
+#endif
{}
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
cam_pkt_op pkt_scan;
if (urb->status != 0) {
- PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+#ifdef CONFIG_PM
+ if (!gspca_dev->frozen)
+#endif
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
return; /* disconnection ? */
}
pkt_scan = gspca_dev->sd_desc->pkt_scan;
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
if (gspca_dev->present) {
- gspca_dev->sd_desc->stopN(gspca_dev);
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
destroy_urbs(gspca_dev);
gspca_set_alt0(gspca_dev);
- gspca_dev->sd_desc->stop0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
PDEBUG(D_STREAM, "stream off OK");
}
}
goto out;
}
- /* if not done yet, initialize the sensor */
- if (gspca_dev->users == 0) {
- if (mutex_lock_interruptible(&gspca_dev->usb_lock)) {
- ret = -ERESTARTSYS;
- goto out;
- }
- ret = gspca_dev->sd_desc->open(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
- if (ret != 0) {
- PDEBUG(D_ERR|D_CONF, "init device failed %d", ret);
- goto out;
- }
- } else if (gspca_dev->users > 4) { /* (arbitrary value) */
+ if (gspca_dev->users > 4) { /* (arbitrary value) */
ret = -EBUSY;
goto out;
}
else
gspca_dev->vdev.debug &= ~3;
#endif
+ ret = 0;
out:
mutex_unlock(&gspca_dev->queue_lock);
if (ret != 0)
/* if the file did the capture, free the streaming resources */
if (gspca_dev->capt_file == file) {
- mutex_lock(&gspca_dev->usb_lock);
- if (gspca_dev->streaming)
+ if (gspca_dev->streaming) {
+ mutex_lock(&gspca_dev->usb_lock);
gspca_stream_off(gspca_dev);
- gspca_dev->sd_desc->close(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
frame_free(gspca_dev);
gspca_dev->capt_file = NULL;
gspca_dev->memory = GSPCA_MEMORY_NO;
return 0;
}
-/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *q_ctrl)
{
struct gspca_dev *gspca_dev = priv;
- int i;
+ int i, ix;
u32 id;
+ ix = -1;
id = q_ctrl->id;
if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
id &= V4L2_CTRL_ID_MASK;
id++;
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
- if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+ continue;
+ if (ix < 0) {
+ ix = i;
+ continue;
}
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+ > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
+ continue;
+ ix = i;
}
- return -EINVAL;
}
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ ix = i;
+ break;
}
}
- if (id >= V4L2_CID_BASE
- && id <= V4L2_CID_LASTP1) {
+ if (ix < 0)
+ return -EINVAL;
+ memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
+ sizeof *q_ctrl);
+ if (gspca_dev->ctrl_dis & (1 << ix))
q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
- }
- return -EINVAL;
+ return 0;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (ctrl->value < ctrls->qctrl.minimum
|| ctrl->value > ctrls->qctrl.maximum)
return -ERANGE;
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
ret = ctrls->get(gspca_dev, &ctrl->value);
i = ret; /* frame index */
frame = &gspca_dev->frame[i];
if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
- if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+ if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
frame->data,
frame->v4l2_buf.bytesused)) {
PDEBUG(D_ERR|D_STREAM,
err("couldn't kzalloc gspca struct");
return -EIO;
}
+ gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+ if (!gspca_dev->usb_buf) {
+ err("out of memory");
+ ret = -EIO;
+ goto out;
+ }
gspca_dev->dev = dev;
gspca_dev->iface = interface->bInterfaceNumber;
gspca_dev->nbalt = intf->num_altsetting;
/* gspca_dev->users = 0; (done by kzalloc) */
gspca_dev->nbufread = 2;
- /* configure the subdriver */
+ /* configure the subdriver and initialize the USB device */
ret = gspca_dev->sd_desc->config(gspca_dev, id);
+ if (ret < 0)
+ goto out;
+ ret = gspca_dev->sd_desc->init(gspca_dev);
if (ret < 0)
goto out;
ret = gspca_set_alt0(gspca_dev);
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
}
/* We don't want people trying to open up the device */
video_unregister_device(&gspca_dev->vdev);
/* Free the memory */
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
PDEBUG(D_PROBE, "disconnect complete");
}
EXPORT_SYMBOL(gspca_disconnect);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ if (!gspca_dev->streaming)
+ return 0;
+ gspca_dev->frozen = 1; /* avoid urb error messages */
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_suspend);
+
+int gspca_resume(struct usb_interface *intf)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ gspca_dev->frozen = 0;
+ gspca_dev->sd_desc->init(gspca_dev);
+ if (gspca_dev->streaming)
+ return gspca_init_transfer(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_resume);
+#endif
/* -- cam driver utility functions -- */
/* auto gain and exposure algorithm based on the knee algorithm described here:
/* device information - set at probe time */
struct cam {
- char *dev_name;
struct v4l2_pix_format *cam_mode; /* size nmodes */
char nmodes;
__u8 epaddr;
/* controls */
const struct ctrl *ctrls;
int nctrls;
-/* operations */
+/* mandatory operations */
cam_cf_op config; /* called on probe */
- cam_op open; /* called on open */
+ cam_op init; /* called on probe and resume */
cam_v_op start; /* called on stream on */
- cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
- cam_v_op close; /* called on close */
cam_pkt_op pkt_scan;
/* optional operations */
+ cam_v_op stopN; /* called on stream off - main alt */
+ cam_v_op stop0; /* called on stream off - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
struct cam cam; /* device information */
const struct sd_desc *sd_desc; /* subdriver description */
+ unsigned ctrl_dis; /* disabled controls (bit map) */
- __u8 usb_buf[8]; /* buffer for USB exchanges */
+#define USB_BUF_SZ 64
+ __u8 *usb_buf; /* buffer for USB exchanges */
struct urb *urb[MAX_NURBS];
__u8 *frbuf; /* buffer for nframes */
struct mutex queue_lock; /* ISOC queue protection */
__u32 sequence; /* frame sequence number */
char streaming;
+#ifdef CONFIG_PM
+ char frozen; /* suspend - resume */
+#endif
char users; /* number of opens */
char present; /* device connected */
char nbufread; /* number of buffers for read() */
struct gspca_frame *frame,
const __u8 *data,
int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
#endif /* GSPCAV2_H */
return rc;
}
-static int reg_w_buf(struct gspca_dev *gspca_dev,
- __u16 index, __u8 *buf, int len)
-{
- int rc;
-
- rc = usb_control_msg(gspca_dev->dev,
- usb_sndbulkpipe(gspca_dev->dev, 4),
- 0x12,
- 0xc8, /* ?? */
- 0, /* value */
- index, buf, len, 500);
- if (rc < 0)
- PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc);
- return rc;
-}
-
static void bulk_w(struct gspca_dev *gspca_dev,
__u16 *pch,
__u16 Address)
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
}
/*
Initialize the MR97113 chip register
*/
- data = kmalloc(16, GFP_KERNEL);
data[0] = 0x00; /* address */
data[1] = 0x0c | 0x01; /* reg 0 */
data[2] = 0x01; /* reg 1 */
data[10] = 0x5d; /* reg 9, I2C device address
* [for PAS5101 (0x40)] [for MI (0x5d)] */
- err_code = reg_w_buf(gspca_dev, data[0], data, 11);
- kfree(data);
+ err_code = reg_w(gspca_dev, data[0], 11);
if (err_code < 0)
return;
- data = gspca_dev->usb_buf;
data[0] = 0x23; /* address */
data[1] = 0x09; /* reg 35, append frame header */
PDEBUG(D_ERR, "Camera Stop failed");
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define SEN_OV6630 2
#define SEN_OV7610 3
#define SEN_OV7620 4
-#define SEN_OV7630 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV7640 5
+#define SEN_OV7670 6
+#define SEN_OV76BE 7
+#define SEN_OV8610 8
};
.get = sd_getcolors,
},
/* next controls work with ov7670 only */
+#define HFLIP_IDX 3
{
{
.id = V4L2_CID_HFLIP,
.set = sd_sethflip,
.get = sd_gethflip,
},
+#define VFLIP_IDX 4
{
{
.id = V4L2_CID_VFLIP,
#define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
#define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */
+struct ov_regvals {
+ __u8 reg;
+ __u8 val;
+};
+struct ov_i2c_regvals {
+ __u8 reg;
+ __u8 val;
+};
+
+static const struct ov_i2c_regvals norm_6x20[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x11, 0x01 },
+ { 0x03, 0x60 },
+ { 0x05, 0x7f }, /* For when autoadjust is off */
+ { 0x07, 0xa8 },
+ /* The ratio of 0x0c and 0x0d controls the white point */
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x0f, 0x15 }, /* COMS */
+ { 0x10, 0x75 }, /* AEC Exposure time */
+ { 0x12, 0x24 }, /* Enable AGC */
+ { 0x14, 0x04 },
+ /* 0x16: 0x06 helps frame stability with moving objects */
+ { 0x16, 0x06 },
+/* { 0x20, 0x30 }, * Aperture correction enable */
+ { 0x26, 0xb2 }, /* BLC enable */
+ /* 0x28: 0x05 Selects RGB format if RGB on */
+ { 0x28, 0x05 },
+ { 0x2a, 0x04 }, /* Disable framerate adjust */
+/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
+ { 0x2d, 0x99 },
+ { 0x33, 0xa0 }, /* Color Processing Parameter */
+ { 0x34, 0xd2 }, /* Max A/D range */
+ { 0x38, 0x8b },
+ { 0x39, 0x40 },
+
+ { 0x3c, 0x39 }, /* Enable AEC mode changing */
+ { 0x3c, 0x3c }, /* Change AEC mode */
+ { 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+ { 0x3d, 0x80 },
+ /* These next two registers (0x4a, 0x4b) are undocumented.
+ * They control the color balance */
+ { 0x4a, 0x80 },
+ { 0x4b, 0x80 },
+ { 0x4d, 0xd2 }, /* This reduces noise a bit */
+ { 0x4e, 0xc1 },
+ { 0x4f, 0x04 },
+/* Do 50-53 have any effect? */
+/* Toggle 0x12[2] off and on here? */
+};
+
+static const struct ov_i2c_regvals norm_6x30[] = {
+ { 0x12, 0x80 }, /* Reset */
+ { 0x00, 0x1f }, /* Gain */
+ { 0x01, 0x99 }, /* Blue gain */
+ { 0x02, 0x7c }, /* Red gain */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x0a }, /* Contrast */
+ { 0x06, 0x95 }, /* Brightness */
+ { 0x07, 0x2d }, /* Sharpness */
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x0e, 0x20 },
+ { 0x0f, 0x05 },
+ { 0x10, 0x9a },
+ { 0x11, 0x00 }, /* Pixel clock = fastest */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x21 },
+ { 0x14, 0x80 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x38 },
+ { 0x18, 0xea },
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 },
+ { 0x1e, 0xc4 },
+ { 0x1f, 0x04 },
+ { 0x20, 0x20 },
+ { 0x21, 0x10 },
+ { 0x22, 0x88 },
+ { 0x23, 0xc0 }, /* Crystal circuit power level */
+ { 0x25, 0x9a }, /* Increase AEC black ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x84 }, /* 60 Hz power */
+ { 0x2b, 0xa8 }, /* 60 Hz power */
+ { 0x2c, 0xa0 },
+ { 0x2d, 0x95 }, /* Enable auto-brightness */
+ { 0x2e, 0x88 },
+ { 0x33, 0x26 },
+ { 0x34, 0x03 },
+ { 0x36, 0x8f },
+ { 0x37, 0x80 },
+ { 0x38, 0x83 },
+ { 0x39, 0x80 },
+ { 0x3a, 0x0f },
+ { 0x3b, 0x3c },
+ { 0x3c, 0x1a },
+ { 0x3d, 0x80 },
+ { 0x3e, 0x80 },
+ { 0x3f, 0x0e },
+ { 0x40, 0x00 }, /* White bal */
+ { 0x41, 0x00 }, /* White bal */
+ { 0x42, 0x80 },
+ { 0x43, 0x3f }, /* White bal */
+ { 0x44, 0x80 },
+ { 0x45, 0x20 },
+ { 0x46, 0x20 },
+ { 0x47, 0x80 },
+ { 0x48, 0x7f },
+ { 0x49, 0x00 },
+ { 0x4a, 0x00 },
+ { 0x4b, 0x80 },
+ { 0x4c, 0xd0 },
+ { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+ { 0x4e, 0x40 },
+ { 0x4f, 0x07 }, /* UV avg., col. killer: max */
+ { 0x50, 0xff },
+ { 0x54, 0x23 }, /* Max AGC gain: 18dB */
+ { 0x55, 0xff },
+ { 0x56, 0x12 },
+ { 0x57, 0x81 },
+ { 0x58, 0x75 },
+ { 0x59, 0x01 }, /* AGC dark current comp.: +1 */
+ { 0x5a, 0x2c },
+ { 0x5b, 0x0f }, /* AWB chrominance levels */
+ { 0x5c, 0x10 },
+ { 0x3d, 0x80 },
+ { 0x27, 0xa6 },
+ { 0x12, 0x20 }, /* Toggle AWB */
+ { 0x12, 0x24 },
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ * shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ * contrast
+ */
+static const struct ov_i2c_regvals norm_7610[] = {
+ { 0x10, 0xff },
+ { 0x16, 0x06 },
+ { 0x28, 0x24 },
+ { 0x2b, 0xac },
+ { 0x12, 0x00 },
+ { 0x38, 0x81 },
+ { 0x28, 0x24 }, /* 0c */
+ { 0x0f, 0x85 }, /* lg's setting */
+ { 0x15, 0x01 },
+ { 0x20, 0x1c },
+ { 0x23, 0x2a },
+ { 0x24, 0x10 },
+ { 0x25, 0x8a },
+ { 0x26, 0xa2 },
+ { 0x27, 0xc2 },
+ { 0x2a, 0x04 },
+ { 0x2c, 0xfe },
+ { 0x2d, 0x93 },
+ { 0x30, 0x71 },
+ { 0x31, 0x60 },
+ { 0x32, 0x26 },
+ { 0x33, 0x20 },
+ { 0x34, 0x48 },
+ { 0x12, 0x24 },
+ { 0x11, 0x01 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+};
+
+static const struct ov_i2c_regvals norm_7620[] = {
+ { 0x00, 0x00 }, /* gain */
+ { 0x01, 0x80 }, /* blue gain */
+ { 0x02, 0x80 }, /* red gain */
+ { 0x03, 0xc0 }, /* OV7670_REG_VREF */
+ { 0x06, 0x60 },
+ { 0x07, 0x00 },
+ { 0x0c, 0x24 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x11, 0x01 },
+ { 0x12, 0x24 },
+ { 0x13, 0x01 },
+ { 0x14, 0x84 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x2f },
+ { 0x18, 0xcf },
+ { 0x19, 0x06 },
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0x18 },
+ { 0x21, 0x80 },
+ { 0x22, 0x80 },
+ { 0x23, 0x00 },
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x20 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x10 },
+ { 0x2b, 0x00 },
+ { 0x2c, 0x88 },
+ { 0x2d, 0x91 },
+ { 0x2e, 0x80 },
+ { 0x2f, 0x44 },
+ { 0x60, 0x27 },
+ { 0x61, 0x02 },
+ { 0x62, 0x5f },
+ { 0x63, 0xd5 },
+ { 0x64, 0x57 },
+ { 0x65, 0x83 },
+ { 0x66, 0x55 },
+ { 0x67, 0x92 },
+ { 0x68, 0xcf },
+ { 0x69, 0x76 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x02 },
+ { 0x6d, 0x44 },
+ { 0x6e, 0x80 },
+ { 0x6f, 0x1d },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },
+ { 0x75, 0x8e },
+ { 0x76, 0x00 },
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0xe2 },
+ { 0x7c, 0x00 },
+};
+
+/* 7640 and 7648. The defaults should be OK for most registers. */
+static const struct ov_i2c_regvals norm_7640[] = {
+ { 0x12, 0x80 },
+ { 0x12, 0x14 },
+};
+
+/* 7670. Defaults taken from OmniVision provided data,
+* as provided by Jonathan Corbet of OLPC */
+static const struct ov_i2c_regvals norm_7670[] = {
+ { OV7670_REG_COM7, OV7670_COM7_RESET },
+ { OV7670_REG_TSLB, 0x04 }, /* OV */
+ { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+ { OV7670_REG_CLKRC, 0x01 },
+/*
+ * Set the hardware window. These values from OV don't entirely
+ * make sense - hstop is less than hstart. But they work...
+ */
+ { OV7670_REG_HSTART, 0x13 },
+ { OV7670_REG_HSTOP, 0x01 },
+ { OV7670_REG_HREF, 0xb6 },
+ { OV7670_REG_VSTART, 0x02 },
+ { OV7670_REG_VSTOP, 0x7a },
+ { OV7670_REG_VREF, 0x0a },
+
+ { OV7670_REG_COM3, 0 },
+ { OV7670_REG_COM14, 0 },
+/* Mystery scaling numbers */
+ { 0x70, 0x3a },
+ { 0x71, 0x35 },
+ { 0x72, 0x11 },
+ { 0x73, 0xf0 },
+ { 0xa2, 0x02 },
+/* { OV7670_REG_COM10, 0x0 }, */
+
+/* Gamma curve values */
+ { 0x7a, 0x20 },
+ { 0x7b, 0x10 },
+ { 0x7c, 0x1e },
+ { 0x7d, 0x35 },
+ { 0x7e, 0x5a },
+ { 0x7f, 0x69 },
+ { 0x80, 0x76 },
+ { 0x81, 0x80 },
+ { 0x82, 0x88 },
+ { 0x83, 0x8f },
+ { 0x84, 0x96 },
+ { 0x85, 0xa3 },
+ { 0x86, 0xaf },
+ { 0x87, 0xc4 },
+ { 0x88, 0xd7 },
+ { 0x89, 0xe8 },
+
+/* AGC and AEC parameters. Note we start by disabling those features,
+ then turn them only after tweaking the values. */
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT },
+ { OV7670_REG_GAIN, 0 },
+ { OV7670_REG_AECH, 0 },
+ { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
+ { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+ { OV7670_REG_BD50MAX, 0x05 },
+ { OV7670_REG_BD60MAX, 0x07 },
+ { OV7670_REG_AEW, 0x95 },
+ { OV7670_REG_AEB, 0x33 },
+ { OV7670_REG_VPT, 0xe3 },
+ { OV7670_REG_HAECC1, 0x78 },
+ { OV7670_REG_HAECC2, 0x68 },
+ { 0xa1, 0x03 }, /* magic */
+ { OV7670_REG_HAECC3, 0xd8 },
+ { OV7670_REG_HAECC4, 0xd8 },
+ { OV7670_REG_HAECC5, 0xf0 },
+ { OV7670_REG_HAECC6, 0x90 },
+ { OV7670_REG_HAECC7, 0x94 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC },
+
+/* Almost all of these are magic "reserved" values. */
+ { OV7670_REG_COM5, 0x61 },
+ { OV7670_REG_COM6, 0x4b },
+ { 0x16, 0x02 },
+ { OV7670_REG_MVFP, 0x07 },
+ { 0x21, 0x02 },
+ { 0x22, 0x91 },
+ { 0x29, 0x07 },
+ { 0x33, 0x0b },
+ { 0x35, 0x0b },
+ { 0x37, 0x1d },
+ { 0x38, 0x71 },
+ { 0x39, 0x2a },
+ { OV7670_REG_COM12, 0x78 },
+ { 0x4d, 0x40 },
+ { 0x4e, 0x20 },
+ { OV7670_REG_GFIX, 0 },
+ { 0x6b, 0x4a },
+ { 0x74, 0x10 },
+ { 0x8d, 0x4f },
+ { 0x8e, 0 },
+ { 0x8f, 0 },
+ { 0x90, 0 },
+ { 0x91, 0 },
+ { 0x96, 0 },
+ { 0x9a, 0 },
+ { 0xb0, 0x84 },
+ { 0xb1, 0x0c },
+ { 0xb2, 0x0e },
+ { 0xb3, 0x82 },
+ { 0xb8, 0x0a },
+
+/* More reserved magic, some of which tweaks white balance */
+ { 0x43, 0x0a },
+ { 0x44, 0xf0 },
+ { 0x45, 0x34 },
+ { 0x46, 0x58 },
+ { 0x47, 0x28 },
+ { 0x48, 0x3a },
+ { 0x59, 0x88 },
+ { 0x5a, 0x88 },
+ { 0x5b, 0x44 },
+ { 0x5c, 0x67 },
+ { 0x5d, 0x49 },
+ { 0x5e, 0x0e },
+ { 0x6c, 0x0a },
+ { 0x6d, 0x55 },
+ { 0x6e, 0x11 },
+ { 0x6f, 0x9f },
+ /* "9e for advance AWB" */
+ { 0x6a, 0x40 },
+ { OV7670_REG_BLUE, 0x40 },
+ { OV7670_REG_RED, 0x60 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC
+ | OV7670_COM8_AWB },
+
+/* Matrix coefficients */
+ { 0x4f, 0x80 },
+ { 0x50, 0x80 },
+ { 0x51, 0 },
+ { 0x52, 0x22 },
+ { 0x53, 0x5e },
+ { 0x54, 0x80 },
+ { 0x58, 0x9e },
+
+ { OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
+ { OV7670_REG_EDGE, 0 },
+ { 0x75, 0x05 },
+ { 0x76, 0xe1 },
+ { 0x4c, 0 },
+ { 0x77, 0x01 },
+ { OV7670_REG_COM13, OV7670_COM13_GAMMA
+ | OV7670_COM13_UVSAT
+ | 2}, /* was 3 */
+ { 0x4b, 0x09 },
+ { 0xc9, 0x60 },
+ { OV7670_REG_COM16, 0x38 },
+ { 0x56, 0x40 },
+
+ { 0x34, 0x11 },
+ { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+ { 0xa4, 0x88 },
+ { 0x96, 0 },
+ { 0x97, 0x30 },
+ { 0x98, 0x20 },
+ { 0x99, 0x30 },
+ { 0x9a, 0x84 },
+ { 0x9b, 0x29 },
+ { 0x9c, 0x03 },
+ { 0x9d, 0x4c },
+ { 0x9e, 0x3f },
+ { 0x78, 0x04 },
+
+/* Extra-weird stuff. Some sort of multiplexor register */
+ { 0x79, 0x01 },
+ { 0xc8, 0xf0 },
+ { 0x79, 0x0f },
+ { 0xc8, 0x00 },
+ { 0x79, 0x10 },
+ { 0xc8, 0x7e },
+ { 0x79, 0x0a },
+ { 0xc8, 0x80 },
+ { 0x79, 0x0b },
+ { 0xc8, 0x01 },
+ { 0x79, 0x0c },
+ { 0xc8, 0x0f },
+ { 0x79, 0x0d },
+ { 0xc8, 0x20 },
+ { 0x79, 0x09 },
+ { 0xc8, 0x80 },
+ { 0x79, 0x02 },
+ { 0xc8, 0xc0 },
+ { 0x79, 0x03 },
+ { 0xc8, 0x40 },
+ { 0x79, 0x05 },
+ { 0xc8, 0x30 },
+ { 0x79, 0x26 },
+};
+
+static const struct ov_i2c_regvals norm_8610[] = {
+ { 0x12, 0x80 },
+ { 0x00, 0x00 },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x03, 0xc0 },
+ { 0x04, 0x30 },
+ { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
+ { 0x0a, 0x86 },
+ { 0x0b, 0xb0 },
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x11, 0x01 },
+ { 0x12, 0x25 },
+ { 0x13, 0x01 },
+ { 0x14, 0x04 },
+ { 0x15, 0x01 }, /* Lin and Win think different about UV order */
+ { 0x16, 0x03 },
+ { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
+ { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
+ { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
+ { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
+ { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
+ { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x80 },
+ { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
+ { 0x2c, 0xac },
+ { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
+ { 0x2e, 0x80 },
+ { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
+ { 0x4c, 0x00 },
+ { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
+ { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
+ { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
+ { 0x63, 0xff },
+ { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
+ * maybe thats wrong */
+ { 0x65, 0x00 },
+ { 0x66, 0x55 },
+ { 0x67, 0xb0 },
+ { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
+ { 0x69, 0x02 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
+ * deleting bit7 colors the first images red */
+ { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6f, 0x01 },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
+ { 0x75, 0x0e },
+ { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
+ { 0x7c, 0x00 },
+ { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
+ { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
+ { 0x7f, 0xfb },
+ { 0x80, 0x28 },
+ { 0x81, 0x00 },
+ { 0x82, 0x23 },
+ { 0x83, 0x0b },
+ { 0x84, 0x00 },
+ { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
+ { 0x86, 0xc9 },
+ { 0x87, 0x00 },
+ { 0x88, 0x00 },
+ { 0x89, 0x01 },
+ { 0x12, 0x20 },
+ { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
+};
+
static unsigned char ov7670_abs_to_sm(unsigned char v)
{
if (v > 127)
rc = reg_w(sd, R51x_I2C_W_SID, slave);
if (rc < 0)
return rc;
+ sd->primary_i2c_slave = slave;
return reg_w(sd, R51x_I2C_R_SID, slave + 1);
}
-struct ov_regvals {
- __u8 reg;
- __u8 val;
-};
-struct ov_i2c_regvals {
- __u8 reg;
- __u8 val;
-};
-
static int write_regvals(struct sd *sd,
const struct ov_regvals *regvals,
int n)
static int ov8xx0_configure(struct sd *sd)
{
int rc;
- static const struct ov_i2c_regvals norm_8610[] = {
- { 0x12, 0x80 },
- { 0x00, 0x00 },
- { 0x01, 0x80 },
- { 0x02, 0x80 },
- { 0x03, 0xc0 },
- { 0x04, 0x30 },
- { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
- { 0x0a, 0x86 },
- { 0x0b, 0xb0 },
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x11, 0x01 },
- { 0x12, 0x25 },
- { 0x13, 0x01 },
- { 0x14, 0x04 },
- { 0x15, 0x01 }, /* Lin and Win think different about UV order */
- { 0x16, 0x03 },
- { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
- { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
- { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
- { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
- { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
- { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x80 },
- { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
- { 0x2c, 0xac },
- { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
- { 0x2e, 0x80 },
- { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
- { 0x4c, 0x00 },
- { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
- { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
- { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
- { 0x63, 0xff },
- { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
- * maybe thats wrong */
- { 0x65, 0x00 },
- { 0x66, 0x55 },
- { 0x67, 0xb0 },
- { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
- { 0x69, 0x02 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
- deleting bit7 colors the first images red */
- { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6f, 0x01 },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
- { 0x75, 0x0e },
- { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
- { 0x7c, 0x00 },
- { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
- { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
- { 0x7f, 0xfb },
- { 0x80, 0x28 },
- { 0x81, 0x00 },
- { 0x82, 0x23 },
- { 0x83, 0x0b },
- { 0x84, 0x00 },
- { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
- { 0x86, 0xc9 },
- { 0x87, 0x00 },
- { 0x88, 0x00 },
- { 0x89, 0x01 },
- { 0x12, 0x20 },
- { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
- };
PDEBUG(D_PROBE, "starting ov8xx0 configuration");
- if (init_ov_sensor(sd) < 0)
- PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID");
- else
- PDEBUG(D_PROBE, "OV86x0 initialized");
-
/* Detect sensor (sub)type */
rc = i2c_r(sd, OV7610_REG_COM_I);
if (rc < 0) {
PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
return -1;
}
- PDEBUG(D_PROBE, "Writing 8610 registers");
- if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
- return -1;
/* Set sensor-specific vars */
/* sd->sif = 0; already done */
{
int rc, high, low;
- /* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- * shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- * contrast
- */
- static const struct ov_i2c_regvals norm_7610[] = {
- { 0x10, 0xff },
- { 0x16, 0x06 },
- { 0x28, 0x24 },
- { 0x2b, 0xac },
- { 0x12, 0x00 },
- { 0x38, 0x81 },
- { 0x28, 0x24 }, /* 0c */
- { 0x0f, 0x85 }, /* lg's setting */
- { 0x15, 0x01 },
- { 0x20, 0x1c },
- { 0x23, 0x2a },
- { 0x24, 0x10 },
- { 0x25, 0x8a },
- { 0x26, 0xa2 },
- { 0x27, 0xc2 },
- { 0x2a, 0x04 },
- { 0x2c, 0xfe },
- { 0x2d, 0x93 },
- { 0x30, 0x71 },
- { 0x31, 0x60 },
- { 0x32, 0x26 },
- { 0x33, 0x20 },
- { 0x34, 0x48 },
- { 0x12, 0x24 },
- { 0x11, 0x01 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- };
-
- static const struct ov_i2c_regvals norm_7620[] = {
- { 0x00, 0x00 }, /* gain */
- { 0x01, 0x80 }, /* blue gain */
- { 0x02, 0x80 }, /* red gain */
- { 0x03, 0xc0 }, /* OV7670_REG_VREF */
- { 0x06, 0x60 },
- { 0x07, 0x00 },
- { 0x0c, 0x24 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x11, 0x01 },
- { 0x12, 0x24 },
- { 0x13, 0x01 },
- { 0x14,&
Code Review / linux-2.6.git / commitdiff