* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/ehca: Use consistent types for ehca_plpar_hcall9()
IB/ehca: Fix printk format warnings from u64 type change
IPoIB: Do not print error messages for multicast join retries
IB/mlx4: Fix memory ordering problem when posting LSO sends
mlx4_core: Fix min() warning
IPoIB: Fix deadlock between ipoib_open() and child interface create
IPoIB: Fix hang in napi_disable() if P_Key is never found
N: David Woodhouse
E: dwmw2@infradead.org
-D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE,
-D: some Alpha platform porting from 2.0, Memory Technology Devices,
-D: Acquire watchdog timer, PC speaker driver maintenance,
+D: JFFS2 file system, Memory Technology Device subsystem,
D: various other stuff that annoyed me by not working.
-S: c/o Red Hat Engineering
-S: Rustat House
-S: 60 Clifton Road
-S: Cambridge. CB1 7EG
+S: c/o Intel Corporation
+S: Pipers Way
+S: Swindon. SN3 1RJ
S: England
N: Chris Wright
u64
dma_get_required_mask(struct device *dev)
-After setting the mask with dma_set_mask(), this API returns the
-actual mask (within that already set) that the platform actually
-requires to operate efficiently. Usually this means the returned mask
+This API returns the mask that the platform requires to
+operate efficiently. Usually this means the returned mask
is the minimum required to cover all of memory. Examining the
required mask gives drivers with variable descriptor sizes the
opportunity to use smaller descriptors as necessary.
Requesting the required mask does not alter the current mask. If you
-wish to take advantage of it, you should issue another dma_set_mask()
-call to lower the mask again.
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
Part Id - Streaming DMA mappings
goto err;
}
}
+ if (!maskset && !tid && !containerset) {
+ usage();
+ goto err;
+ }
do {
int i;
CGROUPS
-------
-Written by Paul Menage <menage@google.com> based on Documentation/cpusets.txt
+Written by Paul Menage <menage@google.com> based on
+Documentation/cgroups/cpusets.txt
Original copyright statements from cpusets.txt:
Portions Copyright (C) 2004 BULL SA.
tracking. The intention is that other subsystems hook into the generic
cgroup support to provide new attributes for cgroups, such as
accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cpusets.txt) allows
+access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows
you to associate a set of CPUs and a set of memory nodes with the
tasks in each cgroup.
is complex. This is a document for memcg's internal behavior.
Please note that implementation details can be changed.
-(*) Topics on API should be in Documentation/controllers/memory.txt)
+(*) Topics on API should be in Documentation/cgroups/memory.txt)
0. How to record usage ?
2 objects are used.
2.4 /proc/sys/vm - The virtual memory subsystem
-----------------------------------------------
-The files in this directory can be used to tune the operation of the virtual
-memory (VM) subsystem of the Linux kernel.
-
-vfs_cache_pressure
-------------------
-
-Controls the tendency of the kernel to reclaim the memory which is used for
-caching of directory and inode objects.
-
-At the default value of vfs_cache_pressure=100 the kernel will attempt to
-reclaim dentries and inodes at a "fair" rate with respect to pagecache and
-swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
-to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
-causes the kernel to prefer to reclaim dentries and inodes.
-
-dirty_background_bytes
-----------------------
-
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
-
-If dirty_background_bytes is written, dirty_background_ratio becomes a function
-of its value (dirty_background_bytes / the amount of dirtyable system memory).
-
-dirty_background_ratio
-----------------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which the pdflush background writeback daemon will start writing out
-dirty data.
-
-If dirty_background_ratio is written, dirty_background_bytes becomes a function
-of its value (dirty_background_ratio * the amount of dirtyable system memory).
-
-dirty_bytes
------------
-
-Contains the amount of dirty memory at which a process generating disk writes
-will itself start writeback.
-
-If dirty_bytes is written, dirty_ratio becomes a function of its value
-(dirty_bytes / the amount of dirtyable system memory).
-
-dirty_ratio
------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which a process which is generating disk writes will itself start
-writing out dirty data.
-
-If dirty_ratio is written, dirty_bytes becomes a function of its value
-(dirty_ratio * the amount of dirtyable system memory).
-
-dirty_writeback_centisecs
--------------------------
-
-The pdflush writeback daemons will periodically wake up and write `old' data
-out to disk. This tunable expresses the interval between those wakeups, in
-100'ths of a second.
-
-Setting this to zero disables periodic writeback altogether.
-
-dirty_expire_centisecs
-----------------------
-
-This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
-
-highmem_is_dirtyable
---------------------
-
-Only present if CONFIG_HIGHMEM is set.
-
-This defaults to 0 (false), meaning that the ratios set above are calculated
-as a percentage of lowmem only. This protects against excessive scanning
-in page reclaim, swapping and general VM distress.
-
-Setting this to 1 can be useful on 32 bit machines where you want to make
-random changes within an MMAPed file that is larger than your available
-lowmem without causing large quantities of random IO. Is is safe if the
-behavior of all programs running on the machine is known and memory will
-not be otherwise stressed.
-
-legacy_va_layout
-----------------
-
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
-will use the legacy (2.4) layout for all processes.
-
-lowmem_reserve_ratio
----------------------
-
-For some specialised workloads on highmem machines it is dangerous for
-the kernel to allow process memory to be allocated from the "lowmem"
-zone. This is because that memory could then be pinned via the mlock()
-system call, or by unavailability of swapspace.
-
-And on large highmem machines this lack of reclaimable lowmem memory
-can be fatal.
-
-So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem. This means that
-a certain amount of lowmem is defended from the possibility of being
-captured into pinned user memory.
-
-(The same argument applies to the old 16 megabyte ISA DMA region. This
-mechanism will also defend that region from allocations which could use
-highmem or lowmem).
-
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
-in defending these lower zones.
-
-If you have a machine which uses highmem or ISA DMA and your
-applications are using mlock(), or if you are running with no swap then
-you probably should change the lowmem_reserve_ratio setting.
-
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256 256 32
--
-Note: # of this elements is one fewer than number of zones. Because the highest
- zone's value is not necessary for following calculation.
-
-But, these values are not used directly. The kernel calculates # of protection
-pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
-
--
-Node 0, zone DMA
- pages free 1355
- min 3
- low 3
- high 4
- :
- :
- numa_other 0
- protection: (0, 2004, 2004, 2004)
- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- pagesets
- cpu: 0 pcp: 0
- :
--
-These protections are added to score to judge whether this zone should be used
-for page allocation or should be reclaimed.
-
-In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
-(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
-normal page requirement. If requirement is DMA zone(index=0), protection[0]
-(=0) is used.
-
-zone[i]'s protection[j] is calculated by following expression.
-
-(i < j):
- zone[i]->protection[j]
- = (total sums of present_pages from zone[i+1] to zone[j] on the node)
- / lowmem_reserve_ratio[i];
-(i = j):
- (should not be protected. = 0;
-(i > j):
- (not necessary, but looks 0)
-
-The default values of lowmem_reserve_ratio[i] are
- 256 (if zone[i] means DMA or DMA32 zone)
- 32 (others).
-As above expression, they are reciprocal number of ratio.
-256 means 1/256. # of protection pages becomes about "0.39%" of total present
-pages of higher zones on the node.
-
-If you would like to protect more pages, smaller values are effective.
-The minimum value is 1 (1/1 -> 100%).
-
-page-cluster
-------------
-
-page-cluster controls the number of pages which are written to swap in
-a single attempt. The swap I/O size.
-
-It is a logarithmic value - setting it to zero means "1 page", setting
-it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
-
-The default value is three (eight pages at a time). There may be some
-small benefits in tuning this to a different value if your workload is
-swap-intensive.
-
-overcommit_memory
------------------
-
-Controls overcommit of system memory, possibly allowing processes
-to allocate (but not use) more memory than is actually available.
-
-
-0 - Heuristic overcommit handling. Obvious overcommits of
- address space are refused. Used for a typical system. It
- ensures a seriously wild allocation fails while allowing
- overcommit to reduce swap usage. root is allowed to
- allocate slightly more memory in this mode. This is the
- default.
-
-1 - Always overcommit. Appropriate for some scientific
- applications.
-
-2 - Don't overcommit. The total address space commit
- for the system is not permitted to exceed swap plus a
- configurable percentage (default is 50) of physical RAM.
- Depending on the percentage you use, in most situations
- this means a process will not be killed while attempting
- to use already-allocated memory but will receive errors
- on memory allocation as appropriate.
-
-overcommit_ratio
-----------------
-
-Percentage of physical memory size to include in overcommit calculations
-(see above.)
-
-Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
-
- swapspace = total size of all swap areas
- physmem = size of physical memory in system
-
-nr_hugepages and hugetlb_shm_group
-----------------------------------
-
-nr_hugepages configures number of hugetlb page reserved for the system.
-
-hugetlb_shm_group contains group id that is allowed to create SysV shared
-memory segment using hugetlb page.
-
-hugepages_treat_as_movable
---------------------------
-
-This parameter is only useful when kernelcore= is specified at boot time to
-create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
-are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
-value written to hugepages_treat_as_movable allows huge pages to be allocated
-from ZONE_MOVABLE.
-
-Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
-pages pool can easily grow or shrink within. Assuming that applications are
-not running that mlock() a lot of memory, it is likely the huge pages pool
-can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
-into nr_hugepages and triggering page reclaim.
-
-laptop_mode
------------
-
-laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-
-block_dump
-----------
-
-block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
-
-swap_token_timeout
-------------------
-
-This file contains valid hold time of swap out protection token. The Linux
-VM has token based thrashing control mechanism and uses the token to prevent
-unnecessary page faults in thrashing situation. The unit of the value is
-second. The value would be useful to tune thrashing behavior.
-
-drop_caches
------------
-
-Writing to this will cause the kernel to drop clean caches, dentries and
-inodes from memory, causing that memory to become free.
-
-To free pagecache:
- echo 1 > /proc/sys/vm/drop_caches
-To free dentries and inodes:
- echo 2 > /proc/sys/vm/drop_caches
-To free pagecache, dentries and inodes:
- echo 3 > /proc/sys/vm/drop_caches
-
-As this is a non-destructive operation and dirty objects are not freeable, the
-user should run `sync' first.
+Please see: Documentation/sysctls/vm.txt for a description of these
+entries.
2.5 /proc/sys/dev - Device specific parameters
--- /dev/null
+This describes the interface for the ADT7475 driver:
+
+(there are 4 fans, numbered fan1 to fan4):
+
+fanX_input Read the current speed of the fan (in RPMs)
+fanX_min Read/write the minimum speed of the fan. Dropping
+ below this sets an alarm.
+
+(there are three PWMs, numbered pwm1 to pwm3):
+
+pwmX Read/write the current duty cycle of the PWM. Writes
+ only have effect when auto mode is turned off (see
+ below). Range is 0 - 255.
+
+pwmX_enable Fan speed control method:
+
+ 0 - No control (fan at full speed)
+ 1 - Manual fan speed control (using pwm[1-*])
+ 2 - Automatic fan speed control
+
+pwmX_auto_channels_temp Select which channels affect this PWM
+
+ 1 - TEMP1 controls PWM
+ 2 - TEMP2 controls PWM
+ 4 - TEMP3 controls PWM
+ 6 - TEMP2 and TEMP3 control PWM
+ 7 - All three inputs control PWM
+
+pwmX_freq Read/write the PWM frequency in Hz. The number
+ should be one of the following:
+
+ 11 Hz
+ 14 Hz
+ 22 Hz
+ 29 Hz
+ 35 Hz
+ 44 Hz
+ 58 Hz
+ 88 Hz
+
+pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode
+
+pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode
+
+(there are three temperature settings numbered temp1 to temp3):
+
+tempX_input Read the current temperature. The value is in milli
+ degrees of Celsius.
+
+tempX_max Read/write the upper temperature limit - exceeding this
+ will cause an alarm.
+
+tempX_min Read/write the lower temperature limit - exceeding this
+ will cause an alarm.
+
+tempX_offset Read/write the temperature adjustment offset
+
+tempX_crit Read/write the THERM limit for remote1.
+
+tempX_crit_hyst Set the temperature value below crit where the
+ fans will stay on - this helps drive the temperature
+ low enough so it doesn't stay near the edge and
+ cause THERM to keep tripping.
+
+tempX_auto_point1_temp Read/write the minimum temperature where the fans will
+ turn on in automatic mode.
+
+tempX_auto_point2_temp Read/write the maximum temperature over which the fans
+ will run in automatic mode. tempX_auto_point1_temp
+ and tempX_auto_point2_temp together define the
+ range of automatic control.
+
+tempX_alarm Read a 1 if the max/min alarm is set
+tempX_fault Read a 1 if either temp1 or temp3 diode has a fault
+
+(There are two voltage settings, in1 and in2):
+
+inX_input Read the current voltage on VCC. Value is in
+ millivolts.
+
+inX_min read/write the minimum voltage limit.
+ Dropping below this causes an alarm.
+
+inX_max read/write the maximum voltage limit.
+ Exceeding this causes an alarm.
+
+inX_alarm Read a 1 if the max/min alarm is set.
Description
-----------
-This driver provides support for the accelerometer found in various HP laptops
-sporting the feature officially called "HP Mobile Data Protection System 3D" or
-"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
-(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
-have their axis automatically oriented on standard way (eg: you can directly
-play neverball). The accelerometer data is readable via
+This driver provides support for the accelerometer found in various HP
+laptops sporting the feature officially called "HP Mobile Data
+Protection System 3D" or "HP 3D DriveGuard". It detect automatically
+laptops with this sensor. Known models (for now the HP 2133, nc6420,
+nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
+automatically oriented on standard way (eg: you can directly play
+neverball). The accelerometer data is readable via
/sys/devices/platform/lis3lv02d.
Sysfs attributes under /sys/devices/platform/lis3lv02d/:
position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input class device operation.
- write: forces the base to be recalibrated with the current position.
+calibrate - read: values (x, y, z) that are used as the base for input
+ class device operation.
+ write: forces the base to be recalibrated with the current
+ position.
rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing
* When the laptop is horizontal the position reported is about 0 for X and Y
and a positive value for Z
* If the left side is elevated, X increases (becomes positive)
- * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the front side (where the touchpad is) is elevated, Y decreases
+ (becomes negative)
* If the laptop is put upside-down, Z becomes negative
-If your laptop model is not recognized (cf "dmesg"), you can send an email to the
-authors to add it to the database. When reporting a new laptop, please include
-the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
-in these four cases.
+If your laptop model is not recognized (cf "dmesg"), you can send an
+email to the authors to add it to the database. When reporting a new
+laptop, please include the output of "dmidecode" plus the value of
+/sys/devices/platform/lis3lv02d/position in these four cases.
ThinkPad ACPI Extras Driver
- Version 0.21
- May 29th, 2008
+ Version 0.22
+ November 23rd, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
This driver used to be named ibm-acpi until kernel 2.6.21 and release
0.13-20070314. It used to be in the drivers/acpi tree, but it was
moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
-2.6.22, and release 0.14.
+2.6.22, and release 0.14. It was moved to drivers/platform/x86 for
+kernel 2.6.29 and release 0.22.
The driver is named "thinkpad-acpi". In some places, like module
names, "thinkpad_acpi" is used because of userspace issues.
rfkill controller switch "tpacpi_wwan_sw": refer to
Documentation/rfkill.txt for details.
+EXPERIMENTAL: UWB
+-----------------
+
+This feature is marked EXPERIMENTAL because it has not been extensively
+tested and validated in various ThinkPad models yet. The feature may not
+work as expected. USE WITH CAUTION! To use this feature, you need to supply
+the experimental=1 parameter when loading the module.
+
+sysfs rfkill class: switch "tpacpi_uwb_sw"
+
+This feature exports an rfkill controller for the UWB device, if one is
+present and enabled in the BIOS.
+
+Sysfs notes:
+
+ rfkill controller switch "tpacpi_uwb_sw": refer to
+ Documentation/rfkill.txt for details.
+
Multiple Commands, Module Parameters
------------------------------------
b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver
-Four configs variables are introduced:
+Following extra configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
controller
- CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
- per descriptor
SUPPORTED IDE MODES
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
This options needs CONFIG_CGROUPS to be defined, and lets the administrator
create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See
- Documentation/cgroups.txt for more information about this filesystem.
+ Documentation/cgroups/cgroups.txt for more information about this filesystem.
Only one of these options to group tasks can be chosen and not both.
dell-m25 Dell Inspiron E1505n
dell-m26 Dell Inspiron 1501
dell-m27 Dell Inspiron E1705/9400
- gateway Gateway laptops with EAPD control
+ gateway-m4 Gateway laptops with EAPD control
+ gateway-m4-2 Gateway laptops with EAPD control
panasonic Panasonic CF-74
STAC9205/9254
macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
imac-intel Intel iMac (eq. type 2)
imac-intel-20 Intel iMac (newer version) (eq. type 3)
+ ecs202 ECS/PC chips
dell-d81 Dell (unknown)
dell-d82 Dell (unknown)
dell-m81 Dell (unknown)
STAC9202/9250/9251
==================
ref Reference board, base config
+ m1 Some Gateway MX series laptops (NX560XL)
+ m1-2 Some Gateway MX series laptops (MX6453)
+ m2 Some Gateway MX series laptops (M255)
m2-2 Some Gateway MX series laptops
+ m3 Some Gateway MX series laptops
+ m5 Some Gateway MX series laptops (MP6954)
m6 Some Gateway NX series laptops
- pa6 Gateway NX860 series
STAC9227/9228/9229/927x
=======================
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
dell-m4-3 Dell desktops
+ hp-m4 HP dv laptops
STAC92HD73*
===========
dell-m6-amic Dell desktops/laptops with analog mics
dell-m6-dmic Dell desktops/laptops with digital mics
dell-m6 Dell desktops/laptops with both type of mics
+ dell-eq Dell desktops/laptops
STAC92HD83*
===========
-Documentation for /proc/sys/vm/* kernel version 2.2.10
+Documentation for /proc/sys/vm/* kernel version 2.6.29
(c) 1998, 1999, Rik van Riel <riel@nl.linux.org>
+ (c) 2008 Peter W. Morreale <pmorreale@novell.com>
For general info and legal blurb, please look in README.
==============================================================
This file contains the documentation for the sysctl files in
-/proc/sys/vm and is valid for Linux kernel version 2.2.
+/proc/sys/vm and is valid for Linux kernel version 2.6.29.
The files in this directory can be used to tune the operation
of the virtual memory (VM) subsystem of the Linux kernel and
files can be found in mm/swap.c.
Currently, these files are in /proc/sys/vm:
-- overcommit_memory
-- page-cluster
-- dirty_ratio
+
+- block_dump
+- dirty_background_bytes
- dirty_background_ratio
+- dirty_bytes
- dirty_expire_centisecs
+- dirty_ratio
- dirty_writeback_centisecs
-- highmem_is_dirtyable (only if CONFIG_HIGHMEM set)
+- drop_caches
+- hugepages_treat_as_movable
+- hugetlb_shm_group
+- laptop_mode
+- legacy_va_layout
+- lowmem_reserve_ratio
- max_map_count
- min_free_kbytes
-- laptop_mode
-- block_dump
-- drop-caches
-- zone_reclaim_mode
-- min_unmapped_ratio
- min_slab_ratio
-- panic_on_oom
-- oom_dump_tasks
-- oom_kill_allocating_task
-- mmap_min_address
-- numa_zonelist_order
+- min_unmapped_ratio
+- mmap_min_addr
- nr_hugepages
- nr_overcommit_hugepages
-- nr_trim_pages (only if CONFIG_MMU=n)
+- nr_pdflush_threads
+- nr_trim_pages (only if CONFIG_MMU=n)
+- numa_zonelist_order
+- oom_dump_tasks
+- oom_kill_allocating_task
+- overcommit_memory
+- overcommit_ratio
+- page-cluster
+- panic_on_oom
+- percpu_pagelist_fraction
+- stat_interval
+- swappiness
+- vfs_cache_pressure
+- zone_reclaim_mode
+
==============================================================
-dirty_bytes, dirty_ratio, dirty_background_bytes,
-dirty_background_ratio, dirty_expire_centisecs,
-dirty_writeback_centisecs, highmem_is_dirtyable,
-vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout,
-drop-caches, hugepages_treat_as_movable:
+block_dump
-See Documentation/filesystems/proc.txt
+block_dump enables block I/O debugging when set to a nonzero value. More
+information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
==============================================================
-overcommit_memory:
+dirty_background_bytes
-This value contains a flag that enables memory overcommitment.
+Contains the amount of dirty memory at which the pdflush background writeback
+daemon will start writeback.
-When this flag is 0, the kernel attempts to estimate the amount
-of free memory left when userspace requests more memory.
+If dirty_background_bytes is written, dirty_background_ratio becomes a function
+of its value (dirty_background_bytes / the amount of dirtyable system memory).
-When this flag is 1, the kernel pretends there is always enough
-memory until it actually runs out.
+==============================================================
-When this flag is 2, the kernel uses a "never overcommit"
-policy that attempts to prevent any overcommit of memory.
+dirty_background_ratio
-This feature can be very useful because there are a lot of
-programs that malloc() huge amounts of memory "just-in-case"
-and don't use much of it.
+Contains, as a percentage of total system memory, the number of pages at which
+the pdflush background writeback daemon will start writing out dirty data.
-The default value is 0.
+==============================================================
-See Documentation/vm/overcommit-accounting and
-security/commoncap.c::cap_vm_enough_memory() for more information.
+dirty_bytes
+
+Contains the amount of dirty memory at which a process generating disk writes
+will itself start writeback.
+
+If dirty_bytes is written, dirty_ratio becomes a function of its value
+(dirty_bytes / the amount of dirtyable system memory).
==============================================================
-overcommit_ratio:
+dirty_expire_centisecs
-When overcommit_memory is set to 2, the committed address
-space is not permitted to exceed swap plus this percentage
-of physical RAM. See above.
+This tunable is used to define when dirty data is old enough to be eligible
+for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
+Data which has been dirty in-memory for longer than this interval will be
+written out next time a pdflush daemon wakes up.
+
+==============================================================
+
+dirty_ratio
+
+Contains, as a percentage of total system memory, the number of pages at which
+a process which is generating disk writes will itself start writing out dirty
+data.
==============================================================
-page-cluster:
+dirty_writeback_centisecs
-The Linux VM subsystem avoids excessive disk seeks by reading
-multiple pages on a page fault. The number of pages it reads
-is dependent on the amount of memory in your machine.
+The pdflush writeback daemons will periodically wake up and write `old' data
+out to disk. This tunable expresses the interval between those wakeups, in
+100'ths of a second.
-The number of pages the kernel reads in at once is equal to
-2 ^ page-cluster. Values above 2 ^ 5 don't make much sense
-for swap because we only cluster swap data in 32-page groups.
+Setting this to zero disables periodic writeback altogether.
==============================================================
-max_map_count:
+drop_caches
-This file contains the maximum number of memory map areas a process
-may have. Memory map areas are used as a side-effect of calling
-malloc, directly by mmap and mprotect, and also when loading shared
-libraries.
+Writing to this will cause the kernel to drop clean caches, dentries and
+inodes from memory, causing that memory to become free.
-While most applications need less than a thousand maps, certain
-programs, particularly malloc debuggers, may consume lots of them,
-e.g., up to one or two maps per allocation.
+To free pagecache:
+ echo 1 > /proc/sys/vm/drop_caches
+To free dentries and inodes:
+ echo 2 > /proc/sys/vm/drop_caches
+To free pagecache, dentries and inodes:
+ echo 3 > /proc/sys/vm/drop_caches
-The default value is 65536.
+As this is a non-destructive operation and dirty objects are not freeable, the
+user should run `sync' first.
==============================================================
-min_free_kbytes:
+hugepages_treat_as_movable
-This is used to force the Linux VM to keep a minimum number
-of kilobytes free. The VM uses this number to compute a pages_min
-value for each lowmem zone in the system. Each lowmem zone gets
-a number of reserved free pages based proportionally on its size.
+This parameter is only useful when kernelcore= is specified at boot time to
+create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
+are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
+value written to hugepages_treat_as_movable allows huge pages to be allocated
+from ZONE_MOVABLE.
-Some minimal amount of memory is needed to satisfy PF_MEMALLOC
-allocations; if you set this to lower than 1024KB, your system will
-become subtly broken, and prone to deadlock under high loads.
-
-Setting this too high will OOM your machine instantly.
+Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
+pages pool can easily grow or shrink within. Assuming that applications are
+not running that mlock() a lot of memory, it is likely the huge pages pool
+can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
+into nr_hugepages and triggering page reclaim.
==============================================================
-percpu_pagelist_fraction
+hugetlb_shm_group
-This is the fraction of pages at most (high mark pcp->high) in each zone that
-are allocated for each per cpu page list. The min value for this is 8. It
-means that we don't allow more than 1/8th of pages in each zone to be
-allocated in any single per_cpu_pagelist. This entry only changes the value
-of hot per cpu pagelists. User can specify a number like 100 to allocate
-1/100th of each zone to each per cpu page list.
+hugetlb_shm_group contains group id that is allowed to create SysV
+shared memory segment using hugetlb page.
-The batch value of each per cpu pagelist is also updated as a result. It is
-set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
+==============================================================
-The initial value is zero. Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
+laptop_mode
-===============================================================
+laptop_mode is a knob that controls "laptop mode". All the things that are
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-zone_reclaim_mode:
+==============================================================
-Zone_reclaim_mode allows someone to set more or less aggressive approaches to
-reclaim memory when a zone runs out of memory. If it is set to zero then no
-zone reclaim occurs. Allocations will be satisfied from other zones / nodes
-in the system.
+legacy_va_layout
-This is value ORed together of
+If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+will use the legacy (2.4) layout for all processes.
-1 = Zone reclaim on
-2 = Zone reclaim writes dirty pages out
-4 = Zone reclaim swaps pages
+==============================================================
-zone_reclaim_mode is set during bootup to 1 if it is determined that pages
-from remote zones will cause a measurable performance reduction. The
-page allocator will then reclaim easily reusable pages (those page
-cache pages that are currently not used) before allocating off node pages.
+lowmem_reserve_ratio
+
+For some specialised workloads on highmem machines it is dangerous for
+the kernel to allow process memory to be allocated from the "lowmem"
+zone. This is because that memory could then be pinned via the mlock()
+system call, or by unavailability of swapspace.
+
+And on large highmem machines this lack of reclaimable lowmem memory
+can be fatal.
+
+So the Linux page allocator has a mechanism which prevents allocations
+which _could_ use highmem from using too much lowmem. This means that
+a certain amount of lowmem is defended from the possibility of being
+captured into pinned user memory.
+
+(The same argument applies to the old 16 megabyte ISA DMA region. This
+mechanism will also defend that region from allocations which could use
+highmem or lowmem).
+
+The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+in defending these lower zones.
+
+If you have a machine which uses highmem or ISA DMA and your
+applications are using mlock(), or if you are running with no swap then
+you probably should change the lowmem_reserve_ratio setting.
+
+The lowmem_reserve_ratio is an array. You can see them by reading this file.
+-
+% cat /proc/sys/vm/lowmem_reserve_ratio
+256 256 32
+-
+Note: # of this elements is one fewer than number of zones. Because the highest
+ zone's value is not necessary for following calculation.
+
+But, these values are not used directly. The kernel calculates # of protection
+pages for each zones from them. These are shown as array of protection pages
+in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+Each zone has an array of protection pages like this.
+
+-
+Node 0, zone DMA
+ pages free 1355
+ min 3
+ low 3
+ high 4
+ :
+ :
+ numa_other 0
+ protection: (0, 2004, 2004, 2004)
+ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ pagesets
+ cpu: 0 pcp: 0
+ :
+-
+These protections are added to score to judge whether this zone should be used
+for page allocation or should be reclaimed.
+
+In this example, if normal pages (index=2) are required to this DMA zone and
+pages_high is used for watermark, the kernel judges this zone should not be
+used because pages_free(1355) is smaller than watermark + protection[2]
+(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
+normal page requirement. If requirement is DMA zone(index=0), protection[0]
+(=0) is used.
+
+zone[i]'s protection[j] is calculated by following expression.
+
+(i < j):
+ zone[i]->protection[j]
+ = (total sums of present_pages from zone[i+1] to zone[j] on the node)
+ / lowmem_reserve_ratio[i];
+(i = j):
+ (should not be protected. = 0;
+(i > j):
+ (not necessary, but looks 0)
+
+The default values of lowmem_reserve_ratio[i] are
+ 256 (if zone[i] means DMA or DMA32 zone)
+ 32 (others).
+As above expression, they are reciprocal number of ratio.
+256 means 1/256. # of protection pages becomes about "0.39%" of total present
+pages of higher zones on the node.
+
+If you would like to protect more pages, smaller values are effective.
+The minimum value is 1 (1/1 -> 100%).
-It may be beneficial to switch off zone reclaim if the system is
-used for a file server and all of memory should be used for caching files
-from disk. In that case the caching effect is more important than
-data locality.
+==============================================================
-Allowing zone reclaim to write out pages stops processes that are
-writing large amounts of data from dirtying pages on other nodes. Zone
-reclaim will write out dirty pages if a zone fills up and so effectively
-throttle the process. This may decrease the performance of a single process
-since it cannot use all of system memory to buffer the outgoing writes
-anymore but it preserve the memory on other nodes so that the performance
-of other processes running on other nodes will not be affected.
+max_map_count:
-Allowing regular swap effectively restricts allocations to the local
-node unless explicitly overridden by memory policies or cpuset
-configurations.
+This file contains the maximum number of memory map areas a process
+may have. Memory map areas are used as a side-effect of calling
+malloc, directly by mmap and mprotect, and also when loading shared
+libraries.
-=============================================================
+While most applications need less than a thousand maps, certain
+programs, particularly malloc debuggers, may consume lots of them,
+e.g., up to one or two maps per allocation.
-min_unmapped_ratio:
+The default value is 65536.
-This is available only on NUMA kernels.
+==============================================================
-A percentage of the total pages in each zone. Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
+min_free_kbytes:
-The default is 1 percent.
+This is used to force the Linux VM to keep a minimum number
+of kilobytes free. The VM uses this number to compute a pages_min
+value for each lowmem zone in the system. Each lowmem zone gets
+a number of reserved free pages based proportionally on its size.
+
+Some minimal amount of memory is needed to satisfy PF_MEMALLOC
+allocations; if you set this to lower than 1024KB, your system will
+become subtly broken, and prone to deadlock under high loads.
+
+Setting this too high will OOM your machine instantly.
=============================================================
=============================================================
-panic_on_oom
+min_unmapped_ratio:
-This enables or disables panic on out-of-memory feature.
+This is available only on NUMA kernels.
-If this is set to 0, the kernel will kill some rogue process,
-called oom_killer. Usually, oom_killer can kill rogue processes and
-system will survive.
+A percentage of the total pages in each zone. Zone reclaim will only
+occur if more than this percentage of pages are file backed and unmapped.
+This is to insure that a minimal amount of local pages is still available for
+file I/O even if the node is overallocated.
-If this is set to 1, the kernel panics when out-of-memory happens.
-However, if a process limits using nodes by mempolicy/cpusets,
-and those nodes become memory exhaustion status, one process
-may be killed by oom-killer. No panic occurs in this case.
-Because other nodes' memory may be free. This means system total status
-may be not fatal yet.
+The default is 1 percent.
-If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+==============================================================
-The default value is 0.
-1 and 2 are for failover of clustering. Please select either
-according to your policy of failover.
+mmap_min_addr
-=============================================================
+This file indicates the amount of address space which a user process will
+be restricted from mmaping. Since kernel null dereference bugs could
+accidentally operate based on the information in the first couple of pages
+of memory userspace processes should not be allowed to write to them. By
+default this value is set to 0 and no protections will be enforced by the
+security module. Setting this value to something like 64k will allow the
+vast majority of applications to work correctly and provide defense in depth
+against future potential kernel bugs.
-oom_dump_tasks
+==============================================================
-Enables a system-wide task dump (excluding kernel threads) to be
-produced when the kernel performs an OOM-killing and includes such
-information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
-name. This is helpful to determine why the OOM killer was invoked
-and to identify the rogue task that caused it.
+nr_hugepages
-If this is set to zero, this information is suppressed. On very
-large systems with thousands of tasks it may not be feasible to dump
-the memory state information for each one. Such systems should not
-be forced to incur a performance penalty in OOM conditions when the
-information may not be desired.
+Change the minimum size of the hugepage pool.
-If this is set to non-zero, this information is shown whenever the
-OOM killer actually kills a memory-hogging task.
+See Documentation/vm/hugetlbpage.txt
-The default value is 0.
+==============================================================
-=============================================================
+nr_overcommit_hugepages
-oom_kill_allocating_task
+Change the maximum size of the hugepage pool. The maximum is
+nr_hugepages + nr_overcommit_hugepages.
-This enables or disables killing the OOM-triggering task in
-out-of-memory situations.
+See Documentation/vm/hugetlbpage.txt
-If this is set to zero, the OOM killer will scan through the entire
-tasklist and select a task based on heuristics to kill. This normally
-selects a rogue memory-hogging task that frees up a large amount of
-memory when killed.
+==============================================================
-If this is set to non-zero, the OOM killer simply kills the task that
-triggered the out-of-memory condition. This avoids the expensive
-tasklist scan.
+nr_pdflush_threads
-If panic_on_oom is selected, it takes precedence over whatever value
-is used in oom_kill_allocating_task.
+The current number of pdflush threads. This value is read-only.
+The value changes according to the number of dirty pages in the system.
-The default value is 0.
+When neccessary, additional pdflush threads are created, one per second, up to
+nr_pdflush_threads_max.
==============================================================
-mmap_min_addr
+nr_trim_pages
-This file indicates the amount of address space which a user process will
-be restricted from mmaping. Since kernel null dereference bugs could
-accidentally operate based on the information in the first couple of pages
-of memory userspace processes should not be allowed to write to them. By
-default this value is set to 0 and no protections will be enforced by the
-security module. Setting this value to something like 64k will allow the
-vast majority of applications to work correctly and provide defense in depth
-against future potential kernel bugs.
+This is available only on NOMMU kernels.
+
+This value adjusts the excess page trimming behaviour of power-of-2 aligned
+NOMMU mmap allocations.
+
+A value of 0 disables trimming of allocations entirely, while a value of 1
+trims excess pages aggressively. Any value >= 1 acts as the watermark where
+trimming of allocations is initiated.
+
+The default value is 1.
+
+See Documentation/nommu-mmap.txt for more information.
==============================================================
==============================================================
-nr_hugepages
+oom_dump_tasks
-Change the minimum size of the hugepage pool.
+Enables a system-wide task dump (excluding kernel threads) to be
+produced when the kernel performs an OOM-killing and includes such
+information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
+name. This is helpful to determine why the OOM killer was invoked
+and to identify the rogue task that caused it.
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, this information is suppressed. On very
+large systems with thousands of tasks it may not be feasible to dump
+the memory state information for each one. Such systems should not
+be forced to incur a performance penalty in OOM conditions when the
+information may not be desired.
+
+If this is set to non-zero, this information is shown whenever the
+OOM killer actually kills a memory-hogging task.
+
+The default value is 0.
==============================================================
-nr_overcommit_hugepages
+oom_kill_allocating_task
-Change the maximum size of the hugepage pool. The maximum is
-nr_hugepages + nr_overcommit_hugepages.
+This enables or disables killing the OOM-triggering task in
+out-of-memory situations.
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, the OOM killer will scan through the entire
+tasklist and select a task based on heuristics to kill. This normally
+selects a rogue memory-hogging task that frees up a large amount of
+memory when killed.
+
+If this is set to non-zero, the OOM killer simply kills the task that
+triggered the out-of-memory condition. This avoids the expensive
+tasklist scan.
+
+If panic_on_oom is selected, it takes precedence over whatever value
+is used in oom_kill_allocating_task.
+
+The default value is 0.
==============================================================
-nr_trim_pages
+overcommit_memory:
-This is available only on NOMMU kernels.
+This value contains a flag that enables memory overcommitment.
-This value adjusts the excess page trimming behaviour of power-of-2 aligned
-NOMMU mmap allocations.
+When this flag is 0, the kernel attempts to estimate the amount
+of free memory left when userspace requests more memory.
-A value of 0 disables trimming of allocations entirely, while a value of 1
-trims excess pages aggressively. Any value >= 1 acts as the watermark where
-trimming of allocations is initiated.
+When this flag is 1, the kernel pretends there is always enough
+memory until it actually runs out.
-The default value is 1.
+When this flag is 2, the kernel uses a "never overcommit"
+policy that attempts to prevent any overcommit of memory.
-See Documentation/nommu-mmap.txt for more information.
+This feature can be very useful because there are a lot of
+programs that malloc() huge amounts of memory "just-in-case"
+and don't use much of it.
+
+The default value is 0.
+
+See Documentation/vm/overcommit-accounting and
+security/commoncap.c::cap_vm_enough_memory() for more information.
+
+==============================================================
+
+overcommit_ratio:
+
+When overcommit_memory is set to 2, the committed address
+space is not permitted to exceed swap plus this percentage
+of physical RAM. See above.
+
+==============================================================
+
+page-cluster
+
+page-cluster controls the number of pages which are written to swap in
+a single attempt. The swap I/O size.
+
+It is a logarithmic value - setting it to zero means "1 page", setting
+it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
+
+The default value is three (eight pages at a time). There may be some
+small benefits in tuning this to a different value if your workload is
+swap-intensive.
+
+=============================================================
+
+panic_on_oom
+
+This enables or disables panic on out-of-memory feature.
+
+If this is set to 0, the kernel will kill some rogue process,
+called oom_killer. Usually, oom_killer can kill rogue processes and
+system will survive.
+
+If this is set to 1, the kernel panics when out-of-memory happens.
+However, if a process limits using nodes by mempolicy/cpusets,
+and those nodes become memory exhaustion status, one process
+may be killed by oom-killer. No panic occurs in this case.
+Because other nodes' memory may be free. This means system total status
+may be not fatal yet.
+
+If this is set to 2, the kernel panics compulsorily even on the
+above-mentioned.
+
+The default value is 0.
+1 and 2 are for failover of clustering. Please select either
+according to your policy of failover.
+
+=============================================================
+
+percpu_pagelist_fraction
+
+This is the fraction of pages at most (high mark pcp->high) in each zone that
+are allocated for each per cpu page list. The min value for this is 8. It
+means that we don't allow more than 1/8th of pages in each zone to be
+allocated in any single per_cpu_pagelist. This entry only changes the value
+of hot per cpu pagelists. User can specify a number like 100 to allocate
+1/100th of each zone to each per cpu page list.
+
+The batch value of each per cpu pagelist is also updated as a result. It is
+set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
+
+The initial value is zero. Kernel does not use this value at boot time to set
+the high water marks for each per cpu page list.
+
+==============================================================
+
+stat_interval
+
+The time interval between which vm statistics are updated. The default
+is 1 second.
+
+==============================================================
+
+swappiness
+
+This control is used to define how aggressive the kernel will swap
+memory pages. Higher values will increase agressiveness, lower values
+descrease the amount of swap.
+
+The default value is 60.
+
+==============================================================
+
+vfs_cache_pressure
+------------------
+
+Controls the tendency of the kernel to reclaim the memory which is used for
+caching of directory and inode objects.
+
+At the default value of vfs_cache_pressure=100 the kernel will attempt to
+reclaim dentries and inodes at a "fair" rate with respect to pagecache and
+swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
+to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
+causes the kernel to prefer to reclaim dentries and inodes.
+
+==============================================================
+
+zone_reclaim_mode:
+
+Zone_reclaim_mode allows someone to set more or less aggressive approaches to
+reclaim memory when a zone runs out of memory. If it is set to zero then no
+zone reclaim occurs. Allocations will be satisfied from other zones / nodes
+in the system.
+
+This is value ORed together of
+
+1 = Zone reclaim on
+2 = Zone reclaim writes dirty pages out
+4 = Zone reclaim swaps pages
+
+zone_reclaim_mode is set during bootup to 1 if it is determined that pages
+from remote zones will cause a measurable performance reduction. The
+page allocator will then reclaim easily reusable pages (those page
+cache pages that are currently not used) before allocating off node pages.
+
+It may be beneficial to switch off zone reclaim if the system is
+used for a file server and all of memory should be used for caching files
+from disk. In that case the caching effect is more important than
+data locality.
+
+Allowing zone reclaim to write out pages stops processes that are
+writing large amounts of data from dirtying pages on other nodes. Zone
+reclaim will write out dirty pages if a zone fills up and so effectively
+throttle the process. This may decrease the performance of a single process
+since it cannot use all of system memory to buffer the outgoing writes
+anymore but it preserve the memory on other nodes so that the performance
+of other processes running on other nodes will not be affected.
+
+Allowing regular swap effectively restricts allocations to the local
+node unless explicitly overridden by memory policies or cpuset
+configurations.
+
+============ End of Document =================================
Linux Magic System Request Key Hacks
Documentation for sysrq.c
-Last update: 2007-AUG-04
* What is the magic SysRq key?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
a lock (you are also in an interrupt handler, which means don't sleep!), so
you must call __handle_sysrq_nolock instead.
+* When I hit a SysRq key combination only the header appears on the console?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sysrq output is subject to the same console loglevel control as all
+other console output. This means that if the kernel was booted 'quiet'
+as is common on distro kernels the output may not appear on the actual
+console, even though it will appear in the dmesg buffer, and be accessible
+via the dmesg command and to the consumers of /proc/kmsg. As a specific
+exception the header line from the sysrq command is passed to all console
+consumers as if the current loglevel was maximum. If only the header
+is emitted it is almost certain that the kernel loglevel is too low.
+Should you require the output on the console channel then you will need
+to temporarily up the console loglevel using alt-sysrq-8 or:
+
+ echo 8 > /proc/sysrq-trigger
+
+Remember to return the loglevel to normal after triggering the sysrq
+command you are interested in.
+
* I have more questions, who can I ask?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And I'll answer any questions about the registration system you got, also
W: bluesmoke.sourceforge.net
S: Maintained
+EDAC-I5400
+P: Mauro Carvalho Chehab
+M: mchehab@redhat.com
+L: bluesmoke-devel@lists.sourceforge.net
+W: bluesmoke.sourceforge.net
+S: Maintained
+
EDAC-I82975X
P: Ranganathan Desikan
P: Arvind R.
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
+FREEZER
+P: Pavel Machek
+M: pavel@suse.cz
+P: Rafael J. Wysocki
+M: rjw@sisk.pl
+L: linux-pm@lists.linux-foundation.org
+S: Supported
+
FTRACE
P: Steven Rostedt
M: rostedt@goodmis.org
XFS FILESYSTEM
P: Silicon Graphics Inc
-P: Tim Shimmin
+P: Bill O'Donnell
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
-T: git git://oss.sgi.com:8090/xfs/xfs-2.6.git
+T: git://oss.sgi.com/xfs/xfs.git
S: Supported
XILINX SYSTEMACE DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
+config HAVE_SYSCALL_WRAPPERS
+ bool
+
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
unifdef-y += fpu.h
unifdef-y += sysinfo.h
unifdef-y += compiler.h
-unifdef-y += swab.h
#ifndef _ALPHA_BYTEORDER_H
#define _ALPHA_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ALPHA_BYTEORDER_H */
struct pci_ops;
struct pci_controller;
struct _alpha_agp_info;
+struct rtc_time;
struct alpha_machine_vector
{
struct _alpha_agp_info *(*agp_info)(void);
+ unsigned int (*rtc_get_time)(struct rtc_time *);
+ int (*rtc_set_time)(struct rtc_time *);
+
const char *vector_name;
/* NUMA information */
free_page((unsigned long)pmd);
}
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ return pte;
+}
static inline void
pte_free_kernel(struct mm_struct *mm, pte_t *pte)
#ifndef _ALPHA_RTC_H
#define _ALPHA_RTC_H
-/*
- * Alpha uses the default access methods for the RTC.
- */
+#if defined(CONFIG_ALPHA_GENERIC)
+# define get_rtc_time alpha_mv.rtc_get_time
+# define set_rtc_time alpha_mv.rtc_set_time
+#else
+# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
+# define get_rtc_time marvel_get_rtc_time
+# define set_rtc_time marvel_set_rtc_time
+# endif
+#endif
#include <asm-generic/rtc.h>
--- /dev/null
+vmlinux.lds
rtc_access.data = bcd2bin(b);
rtc_access.function = 0x48 + !write; /* GET/PUT_TOY */
-#ifdef CONFIG_SMP
- if (smp_processor_id() != boot_cpuid)
- smp_call_function_single(boot_cpuid,
- __marvel_access_rtc,
- &rtc_access, 1);
- else
- __marvel_access_rtc(&rtc_access);
-#else
__marvel_access_rtc(&rtc_access);
-#endif
+
ret = bin2bcd(rtc_access.data);
break;
.end sys_getxpid
.align 4
- .globl sys_pipe
- .ent sys_pipe
-sys_pipe:
+ .globl sys_alpha_pipe
+ .ent sys_alpha_pipe
+sys_alpha_pipe:
lda $sp, -16($sp)
stq $26, 0($sp)
.prologue 0
stq $1, 80+16($sp)
1: lda $sp, 16($sp)
ret
-.end sys_pipe
+.end sys_alpha_pipe
.align 4
.globl sys_execve
{
long i;
+ if (NR_IRQS <= 16)
+ return;
for (i = 16; i < max; ++i) {
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
#define CAT1(x,y) x##y
#define CAT(x,y) CAT1(x,y)
-#define DO_DEFAULT_RTC .rtc_port = 0x70
+#define DO_DEFAULT_RTC \
+ .rtc_port = 0x70, \
+ .rtc_get_time = common_get_rtc_time, \
+ .rtc_set_time = common_set_rtc_time
#define DO_EV4_MMU \
.max_asn = EV4_MAX_ASN, \
extern irqreturn_t timer_interrupt(int irq, void *dev);
extern void common_init_rtc(void);
extern unsigned long est_cycle_freq;
+extern unsigned int common_get_rtc_time(struct rtc_time *time);
+extern int common_set_rtc_time(struct rtc_time *time);
/* smc37c93x.c */
extern void SMC93x_Init(void);
.machine_check = jensen_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.rtc_port = 0x170,
+ .rtc_get_time = common_get_rtc_time,
+ .rtc_set_time = common_set_rtc_time,
.nr_irqs = 16,
.device_interrupt = jensen_device_interrupt,
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include <asm/vga.h>
+#include <asm/rtc.h>
#include "proto.h"
#include "err_impl.h"
init_rtc_irq();
}
+struct marvel_rtc_time {
+ struct rtc_time *time;
+ int retval;
+};
+
+#ifdef CONFIG_SMP
+static void
+smp_get_rtc_time(void *data)
+{
+ struct marvel_rtc_time *mrt = data;
+ mrt->retval = __get_rtc_time(mrt->time);
+}
+
+static void
+smp_set_rtc_time(void *data)
+{
+ struct marvel_rtc_time *mrt = data;
+ mrt->retval = __set_rtc_time(mrt->time);
+}
+#endif
+
+static unsigned int
+marvel_get_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+ struct marvel_rtc_time mrt;
+
+ if (smp_processor_id() != boot_cpuid) {
+ mrt.time = time;
+ smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
+ return mrt.retval;
+ }
+#endif
+ return __get_rtc_time(time);
+}
+
+static int
+marvel_set_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+ struct marvel_rtc_time mrt;
+
+ if (smp_processor_id() != boot_cpuid) {
+ mrt.time = time;
+ smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
+ return mrt.retval;
+ }
+#endif
+ return __set_rtc_time(time);
+}
+
static void
marvel_smp_callin(void)
{
struct alpha_machine_vector marvel_ev7_mv __initmv = {
.vector_name = "MARVEL/EV7",
DO_EV7_MMU,
- DO_DEFAULT_RTC,
+ .rtc_port = 0x70,
+ .rtc_get_time = marvel_get_rtc_time,
+ .rtc_set_time = marvel_set_rtc_time,
DO_MARVEL_IO,
.machine_check = marvel_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
IRONGATE0->pci_mem = pci_mem;
pci_bus_assign_resources(bus);
+
+ /* pci_common_swizzle() relies on bus->self being NULL
+ for the root bus, so just clear it. */
+ bus->self = NULL;
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
}
.quad sys_setpgid
.quad alpha_ni_syscall /* 40 */
.quad sys_dup
- .quad sys_pipe
+ .quad sys_alpha_pipe
.quad osf_set_program_attributes
.quad alpha_ni_syscall
.quad sys_open /* 45 */
#include <asm/io.h>
#include <asm/hwrpb.h>
#include <asm/8253pit.h>
+#include <asm/rtc.h>
#include <linux/mc146818rtc.h>
#include <linux/time.h>
init_rtc_irq();
}
+unsigned int common_get_rtc_time(struct rtc_time *time)
+{
+ return __get_rtc_time(time);
+}
+
+int common_set_rtc_time(struct rtc_time *time)
+{
+ return __set_rtc_time(time);
+}
/* Validate a computed cycle counter result against the known bounds for
the given processor core. There's too much brokenness in the way of
return ret;
}
-pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
- pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
- return pte;
-}
-
/*
* BAD_PAGE is the page that is used for page faults when linux
include include/asm-generic/Kbuild.asm
unifdef-y += hwcap.h
-unifdef-y += swab.h
#ifndef __ASM_ARM_BYTEORDER_H
#define __ASM_ARM_BYTEORDER_H
-#include <asm/swab.h>
-
#ifdef __ARMEB__
#include <linux/byteorder/big_endian.h>
#else
CALL(sys_uselib)
CALL(sys_swapon)
CALL(sys_reboot)
- CALL(OBSOLETE(old_readdir)) /* used by libc4 */
+ CALL(OBSOLETE(sys_old_readdir)) /* used by libc4 */
/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */
CALL(sys_munmap)
CALL(sys_truncate)
#include <linux/err.h>
#include <linux/io.h>
-#include <mach/imx-regs.h>
+#include <mach/hardware.h>
/*
* Very simple approach: We can't disable clocks, so we do
imx_mmc_device.dev.platform_data = info;
}
-static struct imxfb_mach_info imx_fb_info;
+static struct imx_fb_platform_data imx_fb_info;
-void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
+void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
{
- memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
+ memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
}
static struct resource imxfb_resources[] = {
#define TSTAT_CAPT (1<<1)
#define TSTAT_COMP (1<<0)
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y) ( (y) & 0x1ff )
-
-#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x) ( (x) & 0x3ff )
-
-#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1 (1<<31)
-#define CPOS_CC0 (1<<30)
-#define CPOS_OP (1<<28)
-#define CPOS_CXP(x) (((x) & 3ff) << 16)
-#define CPOS_CYP(y) ((y) & 0x1ff)
-
-#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN (1<<31)
-#define LCWHB_CW(w) (((w) & 0x1f) << 24)
-#define LCWHB_CH(h) (((h) & 0x1f) << 16)
-#define LCWHB_BD(x) ((x) & 0xff)
-
-#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT (1<<31)
-#define PCR_COLOR (1<<30)
-#define PCR_PBSIZ_1 (0<<28)
-#define PCR_PBSIZ_2 (1<<28)
-#define PCR_PBSIZ_4 (2<<28)
-#define PCR_PBSIZ_8 (3<<28)
-#define PCR_BPIX_1 (0<<25)
-#define PCR_BPIX_2 (1<<25)
-#define PCR_BPIX_4 (2<<25)
-#define PCR_BPIX_8 (3<<25)
-#define PCR_BPIX_12 (4<<25)
-#define PCR_BPIX_16 (4<<25)
-#define PCR_PIXPOL (1<<24)
-#define PCR_FLMPOL (1<<23)
-#define PCR_LPPOL (1<<22)
-#define PCR_CLKPOL (1<<21)
-#define PCR_OEPOL (1<<20)
-#define PCR_SCLKIDLE (1<<19)
-#define PCR_END_SEL (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS (1<<16)
-#define PCR_ACD_SEL (1<<15)
-#define PCR_ACD(x) (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL (1<<7)
-#define PCR_SHARP (1<<6)
-#define PCR_PCD(x) ((x) & 0x3f)
-
-#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x) ((x) & 1f)
-
-#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x) (((x) & 0xf))
-
-#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK (1<<15)
-#define PWMR_SCR1 (1<<10)
-#define PWMR_SCR0 (1<<9)
-#define PWMR_CC_EN (1<<8)
-#define PWMR_PW(x) ((x) & 0xff)
-
-#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST (1<<31)
-#define DMACR_HM(x) (((x) & 0xf) << 16)
-#define DMACR_TM(x) ((x) &0xf)
-
-#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN (1<<1)
-#define RMCR_SELF_REF (1<<0)
-
-#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN (1<<2)
-#define LCDICR_INT_CON (1)
-
-#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF (1<<1)
-#define LCDISR_BOF (1<<0)
-
#endif // _IMX_REGS_H
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
+#include <mach/map.h>
#include "cpu.h"
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <mach/system.h>
#include <mach/map.h>
#include <mach/regs-timer.h>
EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */
#else
EXPORT_SYMBOL(cpu_cache);
#endif
include include/asm-generic/Kbuild.asm
-header-y += swab.h
header-y += cachectl.h
#ifndef __ASM_AVR32_BYTEORDER_H
#define __ASM_AVR32_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* __ASM_AVR32_BYTEORDER_H */
include include/asm-generic/Kbuild.asm
unifdef-y += fixed_code.h
-unifdef-y += swab.h
#ifndef _BLACKFIN_BYTEORDER_H
#define _BLACKFIN_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _BLACKFIN_BYTEORDER_H */
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
-#ifndef _CRIS_ARCH_BYTEORDER_H
-#define _CRIS_ARCH_BYTEORDER_H
+#ifndef _CRIS_ARCH_SWAB_H
+#define _CRIS_ARCH_SWAB_H
#include <asm/types.h>
#include <linux/compiler.h>
+#define __SWAB_64_THRU_32__
+
/* we just define these two (as we can do the swap in a single
* asm instruction in CRIS) and the arch-independent files will put
* them together into ntohl etc.
*/
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
-
+
return(x);
}
+#define __arch_swab32 __arch_swab32
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__ ("swapb %0" : "=r" (x) : "0" (x));
-
+
return(x);
}
+#define __arch_swab16 __arch_swab16
#endif
+++ /dev/null
-#ifndef _ASM_CRIS_ARCH_BYTEORDER_H
-#define _ASM_CRIS_ARCH_BYTEORDER_H
-
-#include <asm/types.h>
-
-static inline __const__ __u32
-___arch__swab32(__u32 x)
-{
- __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
- return (x);
-}
-
-static inline __const__ __u16
-___arch__swab16(__u16 x)
-{
- __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
- return (x);
-}
-
-#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */
--- /dev/null
+#ifndef _ASM_CRIS_ARCH_SWAB_H
+#define _ASM_CRIS_ARCH_SWAB_H
+
+#include <asm/types.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __const__ __u32
+__arch_swab32(__u32 x)
+{
+ __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
+ return (x);
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __const__ __u16
+__arch_swab16(__u16 x)
+{
+ __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
+ return (x);
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _ASM_CRIS_ARCH_SWAB_H */
#ifndef _CRIS_BYTEORDER_H
#define _CRIS_BYTEORDER_H
-#ifdef __GNUC__
-
-#ifdef __KERNEL__
-#include <arch/byteorder.h>
-
-/* defines are necessary because the other files detect the presence
- * of a defined __arch_swab32, not an inline
- */
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#endif /* __KERNEL__ */
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
#include <linux/byteorder/little_endian.h>
#endif
--- /dev/null
+#ifndef _CRIS_SWAB_H
+#define _CRIS_SWAB_H
+
+#ifdef __KERNEL__
+#include <arch/swab.h>
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_SWAB_H */
include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
#ifndef _H8300_BYTEORDER_H
#define _H8300_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _H8300_BYTEORDER_H */
.long SYMBOL_NAME(sys_uselib)
.long SYMBOL_NAME(sys_swapon)
.long SYMBOL_NAME(sys_reboot)
- .long SYMBOL_NAME(old_readdir)
+ .long SYMBOL_NAME(sys_old_readdir)
.long SYMBOL_NAME(old_mmap) /* 90 */
.long SYMBOL_NAME(sys_munmap)
.long SYMBOL_NAME(sys_truncate)
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
select ARCH_SUPPORTS_MSI
+ select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
data8 sys_mkdir
data8 sys_rmdir /* 40 */
data8 sys_dup
- data8 sys_pipe
+ data8 sys_ia64_pipe
data8 compat_sys_times
data8 sys_ni_syscall /* old prof syscall holder */
data8 sys32_brk /* 45 */
unifdef-y += intrinsics.h
unifdef-y += perfmon.h
unifdef-y += ustack.h
-unifdef-y += swab.h
#ifndef _ASM_IA64_BYTEORDER_H
#define _ASM_IA64_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ASM_IA64_BYTEORDER_H */
#include <linux/scatterlist.h>
#include <asm/swiotlb.h>
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
struct dma_mapping_ops {
int (*mapping_error)(struct device *dev,
dma_addr_t dma_addr);
typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef u64 ia64_mv_dma_get_required_mask (struct device *);
/*
* WARNING: The legacy I/O space is _architected_. Platforms are
# define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
# define platform_dma_mapping_error ia64_mv.dma_mapping_error
# define platform_dma_supported ia64_mv.dma_supported
+# define platform_dma_get_required_mask ia64_mv.dma_get_required_mask
# define platform_irq_to_vector ia64_mv.irq_to_vector
# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq
# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem
ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
ia64_mv_dma_mapping_error *dma_mapping_error;
ia64_mv_dma_supported *dma_supported;
+ ia64_mv_dma_get_required_mask *dma_get_required_mask;
ia64_mv_irq_to_vector *irq_to_vector;
ia64_mv_local_vector_to_irq *local_vector_to_irq;
ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
platform_dma_sync_sg_for_device, \
platform_dma_mapping_error, \
platform_dma_supported, \
+ platform_dma_get_required_mask, \
platform_irq_to_vector, \
platform_local_vector_to_irq, \
platform_pci_get_legacy_mem, \
#ifndef platform_dma_supported
# define platform_dma_supported swiotlb_dma_supported
#endif
+#ifndef platform_dma_get_required_mask
+# define platform_dma_get_required_mask ia64_dma_get_required_mask
+#endif
#ifndef platform_irq_to_vector
# define platform_irq_to_vector __ia64_irq_to_vector
#endif
extern ia64_mv_send_ipi_t ia64_send_ipi;
extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_dma_get_required_mask ia64_dma_get_required_mask;
extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
extern ia64_mv_dma_sync_sg_for_device sn_dma_sync_sg_for_device;
extern ia64_mv_dma_mapping_error sn_dma_mapping_error;
extern ia64_mv_dma_supported sn_dma_supported;
+extern ia64_mv_dma_get_required_mask sn_dma_get_required_mask;
extern ia64_mv_migrate_t sn_migrate;
extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event;
extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq;
#define platform_dma_sync_sg_for_device sn_dma_sync_sg_for_device
#define platform_dma_mapping_error sn_dma_mapping_error
#define platform_dma_supported sn_dma_supported
+#define platform_dma_get_required_mask sn_dma_get_required_mask
#define platform_migrate sn_migrate
#define platform_kernel_launch_event sn_kernel_launch_event
#ifdef CONFIG_PCI_MSI
struct sigaction;
long sys_execve(char __user *filename, char __user * __user *argv,
char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
+asmlinkage long sys_ia64_pipe(void);
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
struct sigaction __user *oact,
data8 sys_mkdir // 1055
data8 sys_rmdir
data8 sys_dup
- data8 sys_pipe
+ data8 sys_ia64_pipe
data8 sys_times
data8 ia64_brk // 1060
data8 sys_setgid
return 1;
ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
ia64_psr(regs)->ri = p->ainsn.slot;
* and r9) as this is faster than doing a copy_to_user().
*/
asmlinkage long
-sys_pipe (void)
+sys_ia64_pipe (void)
{
struct pt_regs *regs = task_pt_regs(current);
int fd[2];
* (i.e. don't allow attacker to fill up logs with unaligned accesses).
*/
int no_unaligned_warning;
+int unaligned_dump_stack;
static int noprint_warning;
/*
}
}
} else {
- if (within_logging_rate_limit())
+ if (within_logging_rate_limit()) {
printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
ifa, regs->cr_iip + ipsr->ri);
+ if (unaligned_dump_stack)
+ dump_stack();
+ }
set_fs(KERNEL_DS);
}
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/bootmem.h>
#include <asm/machvec.h>
#include <asm/page.h>
pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
}
+u64 ia64_dma_get_required_mask(struct device *dev)
+{
+ u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
+ u32 high_totalram = ((max_pfn - 1) >> (32 - PAGE_SHIFT));
+ u64 mask;
+
+ if (!high_totalram) {
+ /* convert to mask just covering totalram */
+ low_totalram = (1 << (fls(low_totalram) - 1));
+ low_totalram += low_totalram - 1;
+ mask = low_totalram;
+ } else {
+ high_totalram = (1 << (fls(high_totalram) - 1));
+ high_totalram += high_totalram - 1;
+ mask = (((u64)high_totalram) << 32) + 0xffffffff;
+ }
+ return mask;
+}
+EXPORT_SYMBOL_GPL(ia64_dma_get_required_mask);
+
+u64 dma_get_required_mask(struct device *dev)
+{
+ return platform_dma_get_required_mask(dev);
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
static int __init pcibios_init(void)
{
set_pci_cacheline_size();
}
EXPORT_SYMBOL(sn_dma_mapping_error);
+u64 sn_dma_get_required_mask(struct device *dev)
+{
+ return DMA_64BIT_MASK;
+}
+EXPORT_SYMBOL_GPL(sn_dma_get_required_mask);
+
char *sn_pci_get_legacy_mem(struct pci_bus *bus)
{
if (!SN_PCIBUS_BUSSOFT(bus))
blocked = stolentick;
if (stolen > 0 || blocked > 0) {
- account_steal_time(NULL, jiffies_to_cputime(stolen));
- account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+ account_steal_ticks(stolen);
+ account_idle_ticks(blocked);
run_local_timers();
if (rcu_pending(cpu))
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
#ifndef _M68KNOMMU_BYTEORDER_H
#define _M68KNOMMU_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _M68KNOMMU_BYTEORDER_H */
.long sys_uselib
.long sys_ni_syscall /* sys_swapon */
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
header-y += cachectl.h sgidefs.h sysmips.h
-header-y += swab.h
#ifndef _ASM_BYTEORDER_H
#define _ASM_BYTEORDER_H
-#include <asm/swab.h>
-
#if defined(__MIPSEB__)
#include <linux/byteorder/big_endian.h>
#elif defined(__MIPSEL__)
sys sys_uselib 1
sys sys_swapon 2
sys sys_reboot 3
- sys old_readdir 3
+ sys sys_old_readdir 3
sys old_mmap 6 /* 4090 */
sys sys_munmap 2
sys sys_truncate 2
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
unifdef-y += pdc.h
-unifdef-y += swab.h
#ifndef _PARISC_BYTEORDER_H
#define _PARISC_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _PARISC_BYTEORDER_H */
select HAVE_DMA_ATTRS if PPC64
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_OPROFILE
+ select HAVE_SYSCALL_WRAPPERS if PPC64
config EARLY_PRINTK
bool
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <27 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <27 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_STORAGE=m
+CONFIG_PS3_DISK=m
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_CELLEB=y
+CONFIG_PPC_CELL_QPACE=y
#
# Cell Broadband Engine options
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=m
+CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_PS3=m
+CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_PS3=m
+CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
unifdef-y += termios.h
unifdef-y += types.h
unifdef-y += unistd.h
-unifdef-y += swab.h
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _ASM_POWERPC_BYTEORDER_H */
int (*map)(struct ps3_dma_region *,
unsigned long virt_addr,
unsigned long len,
- unsigned long *bus_addr,
+ dma_addr_t *bus_addr,
u64 iopte_pp);
int (*unmap)(struct ps3_dma_region *,
- unsigned long bus_addr,
+ dma_addr_t bus_addr,
unsigned long len);
};
/**
int ps3_dma_region_create(struct ps3_dma_region *r);
int ps3_dma_region_free(struct ps3_dma_region *r);
int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
- unsigned long len, unsigned long *bus_addr,
+ unsigned long len, dma_addr_t *bus_addr,
u64 iopte_pp);
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr,
unsigned long len);
/* mmio routines */
#define UCC_GETH_UCCE_RXF1 0x00000002
#define UCC_GETH_UCCE_RXF0 0x00000001
-/* UPSMR, when used as a UART */
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
#define UCC_UART_UPSMR_FLC 0x8000
#define UCC_UART_UPSMR_SL 0x4000
#define UCC_UART_UPSMR_CL_MASK 0x3000
#define UCC_UART_UPSMR_TPM_EVEN 0x0002
#define UCC_UART_UPSMR_TPM_HIGH 0x0003
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE 0x80000000
+#define UCC_GETH_UPSMR_PTPE 0x40000000
+#define UCC_GETH_UPSMR_ECM 0x04000000
+#define UCC_GETH_UPSMR_HSE 0x02000000
+#define UCC_GETH_UPSMR_PRO 0x00400000
+#define UCC_GETH_UPSMR_CAP 0x00200000
+#define UCC_GETH_UPSMR_RSH 0x00100000
+#define UCC_GETH_UPSMR_RPM 0x00080000
+#define UCC_GETH_UPSMR_R10M 0x00040000
+#define UCC_GETH_UPSMR_RLPB 0x00020000
+#define UCC_GETH_UPSMR_TBIM 0x00010000
+#define UCC_GETH_UPSMR_RES1 0x00002000
+#define UCC_GETH_UPSMR_RMM 0x00001000
+#define UCC_GETH_UPSMR_CAM 0x00000400
+#define UCC_GETH_UPSMR_BRO 0x00000200
+
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
*/
#define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */
/* Buffer size for ppc_rtas system call. */
#define RTAS_RMOBUF_MAX (64 * 1024)
SYSCALL(uselib)
SYSCALL(swapon)
SYSCALL(reboot)
-SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
SYSCALL_SPU(mmap)
SYSCALL_SPU(munmap)
SYSCALL_SPU(truncate)
#ifndef _ASM_POWERPC_TYPES_H
#define _ASM_POWERPC_TYPES_H
-#ifdef __powerpc64__
+/*
+ * This is here because we used to use l64 for 64bit powerpc
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ */
+#if defined(__powerpc64__) && !defined(__KERNEL__)
# include <asm-generic/int-l64.h>
#else
# include <asm-generic/int-ll64.h>
#include "head_booke.h"
#endif
+#if defined(CONFIG_FSL_BOOKE)
+#include "../mm/mmu_decl.h"
+#endif
+
int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(PGD_T_LOG2, PGD_T_LOG2);
DEFINE(PTE_T_LOG2, PTE_T_LOG2);
#endif
+#ifdef CONFIG_FSL_BOOKE
+ DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+#endif
#ifdef CONFIG_KVM_EXIT_TIMING
DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
struct cache *next_local; /* next cache of >= level */
};
-static DEFINE_PER_CPU(struct cache_dir *, cache_dir);
+static DEFINE_PER_CPU(struct cache_dir *, cache_dir_pcpu);
/* traversal/modification of this list occurs only at cpu hotplug time;
* access is serialized by cpu hotplug locking
cache_dir->kobj = kobj;
- WARN_ON_ONCE(per_cpu(cache_dir, cpu_id) != NULL);
+ WARN_ON_ONCE(per_cpu(cache_dir_pcpu, cpu_id) != NULL);
- per_cpu(cache_dir, cpu_id) = cache_dir;
+ per_cpu(cache_dir_pcpu, cpu_id) = cache_dir;
return cache_dir;
err:
/* Prevent userspace from seeing inconsistent state - remove
* the sysfs hierarchy first */
- cache_dir = per_cpu(cache_dir, cpu_id);
+ cache_dir = per_cpu(cache_dir_pcpu, cpu_id);
/* careful, sysfs population may have failed */
if (cache_dir)
remove_cache_dir(cache_dir);
- per_cpu(cache_dir, cpu_id) = NULL;
+ per_cpu(cache_dir_pcpu, cpu_id) = NULL;
/* clear the CPU's bit in its cache chain, possibly freeing
* cache objects */
"Warning: IOMMU offset too big for device mask\n");
if (tbl)
printk(KERN_INFO
- "mask: 0x%08lx, table offset: 0x%08lx\n",
+ "mask: 0x%08llx, table offset: 0x%08lx\n",
mask, tbl->it_offset);
else
- printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+ printk(KERN_INFO "mask: 0x%08llx, table unavailable\n",
mask);
return 0;
} else
/* turn on 64-bit mode */
bl .enable_64b_mode
+ li r0,0
+ mfspr r3,SPRN_HID4
+ rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
+ sync
+ mtspr SPRN_HID4,r3
+ isync
+ sync
+ slbia
+
/* get TOC pointer (real address) */
bl .relative_toc
#endif
#endif
- mfspr r3,SPRN_TLB1CFG
- andi. r3,r3,0xfff
- lis r4,num_tlbcam_entries@ha
- stw r3,num_tlbcam_entries@l(r4)
/*
* Decide what sort of machine this is and initialize the MMU.
*/
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
#ifdef CONFIG_PPC_E500MC
- EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD)
#endif
/* Debug Interrupt */
_GLOBAL(loadcam_entry)
lis r4,TLBCAM@ha
addi r4,r4,TLBCAM@l
- mulli r5,r3,20
+ mulli r5,r3,TLBCAM_SIZE
add r3,r5,r4
lwz r4,0(r3)
mtspr SPRN_MAS0,r4
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_free: invalid entry\n");
printk(KERN_INFO "\tentry = 0x%lx\n", entry);
- printk(KERN_INFO "\tdma_addr = 0x%lx\n", (u64)dma_addr);
- printk(KERN_INFO "\tTable = 0x%lx\n", (u64)tbl);
- printk(KERN_INFO "\tbus# = 0x%lx\n", (u64)tbl->it_busno);
- printk(KERN_INFO "\tsize = 0x%lx\n", (u64)tbl->it_size);
- printk(KERN_INFO "\tstartOff = 0x%lx\n", (u64)tbl->it_offset);
- printk(KERN_INFO "\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr);
+ printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl);
+ printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno);
+ printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size);
+ printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset);
+ printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index);
WARN_ON(1);
}
return;
if (rc)
return;
- seq_printf(m, "partition_entitled_capacity=%ld\n",
+ seq_printf(m, "partition_entitled_capacity=%lld\n",
ppp_data.entitlement);
seq_printf(m, "group=%d\n", ppp_data.group_num);
seq_printf(m, "system_active_processors=%d\n",
ppp_data.unallocated_weight);
seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
seq_printf(m, "capped=%d\n", ppp_data.capped);
- seq_printf(m, "unallocated_capacity=%ld\n",
+ seq_printf(m, "unallocated_capacity=%lld\n",
ppp_data.unallocated_entitlement);
}
} else
return -EINVAL;
- pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+ pr_debug("%s: current_entitled = %llu, current_weight = %u\n",
__func__, ppp_data.entitlement, ppp_data.weight);
- pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+ pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
__func__, new_entitled, new_weight);
retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
__func__, mpp_data.entitled_mem, mpp_data.mem_weight);
- pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+ pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
__func__, new_entitled, new_weight);
rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
KDUMP_KERNELBASE);
crashk_res.start = KDUMP_KERNELBASE;
+#else
+ if (!crashk_res.start) {
+ /*
+ * unspecified address, choose a region of specified size
+ * can overlap with initrd (ignoring corruption when retained)
+ * ppc64 requires kernel and some stacks to be in first segemnt
+ */
+ crashk_res.start = KDUMP_KERNELBASE;
+ }
+
+ crash_base = PAGE_ALIGN(crashk_res.start);
+ if (crash_base != crashk_res.start) {
+ printk("Crash kernel base must be aligned to 0x%lx\n",
+ PAGE_SIZE);
+ crashk_res.start = crash_base;
+ }
+
#endif
crash_size = PAGE_ALIGN(crash_size);
crashk_res.end = crashk_res.start + crash_size - 1;
+ /* The crash region must not overlap the current kernel */
+ if (overlaps_crashkernel(__pa(_stext), _end - _stext)) {
+ printk(KERN_WARNING
+ "Crash kernel can not overlap current kernel\n");
+ crashk_res.start = crashk_res.end = 0;
+ return;
+ }
+
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
if (bus->self) {
pr_debug("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
- pr_debug(" virt=0x%016lx...0x%016lx\n",
+ pr_debug(" virt=0x%016llx...0x%016llx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
hose->io_base_phys - phys_page);
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
- pr_debug(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
+ pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
pr_debug(" size=0x%016lx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
- pr_debug(" hose->io_resource=0x%016lx...0x%016lx\n",
+ pr_debug(" hose->io_resource=0x%016llx...0x%016llx\n",
hose->io_resource.start, hose->io_resource.end);
return 0;
{
u32 *slb_size_ptr;
+ slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
+ if (slb_size_ptr != NULL) {
+ mmu_slb_size = *slb_size_ptr;
+ return;
+ }
slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
if (slb_size_ptr != NULL) {
mmu_slb_size = *slb_size_ptr;
printk("Starting Linux PPC64 %s\n", init_utsname()->version);
printk("-----------------------------------------------------\n");
- printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
+ printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
+ printk("physicalMemorySize = 0x%llx\n", lmb_phys_mem_size());
if (ppc64_caches.dline_size != 0x80)
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
- limit = min(0x10000000UL, lmb.rmo_size);
+ limit = min(0x10000000ULL, lmb.rmo_size);
for_each_possible_cpu(i) {
unsigned long sp;
/* The dummy segment contents for the bug workaround mentioned above
near PHDRS. */
.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
- LONG(0xf177)
+ LONG(0)
+ LONG(0)
+ LONG(0)
} :kernel :dummy
/*
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
static unsigned long __cam0, __cam1, __cam2;
#define NUM_TLBCAMS (16)
-struct tlbcam {
- u32 MAS0;
- u32 MAS1;
- u32 MAS2;
- u32 MAS3;
- u32 MAS7;
-} TLBCAM[NUM_TLBCAMS];
+struct tlbcam TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
unsigned long start;
#endif /* CONFIG_PPC_MMU_NOHASH */
#ifdef CONFIG_PPC32
+
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ u32 MAS2;
+ u32 MAS3;
+ u32 MAS7;
+};
+
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
extern void setbat(int index, unsigned long virt, phys_addr_t phys,
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
#endif
extern unsigned long ioremap_bot;
unsigned long len)
{
struct slice_mask mask, available;
+ unsigned int psize = mm->context.user_psize;
mask = slice_range_to_mask(addr, len);
- available = slice_mask_for_size(mm, mm->context.user_psize);
+ available = slice_mask_for_size(mm, psize);
+#ifdef CONFIG_PPC_64K_PAGES
+ /* We need to account for 4k slices too */
+ if (psize == MMU_PAGE_64K) {
+ struct slice_mask compat_mask;
+ compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+ or_mask(available, compat_mask);
+ }
+#endif
#if 0 /* too verbose */
slice_dbg("is_hugepage_only_range(mm=%p, addr=%lx, len=%lx)\n",
paca[cpu].stab_addr = newstab;
paca[cpu].stab_real = virt_to_abs(newstab);
- printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
- "virtual, 0x%lx absolute\n",
+ printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
+ "virtual, 0x%llx absolute\n",
cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
}
}
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
/* counters are 40 bit. Move to cputable at some point? */
reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
- pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+ pr_debug("reset_value for pmc%u inited to 0x%llx\n",
pmc, reset_value[pmc]);
}
oprofile_running = 1;
- pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+ pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
return 0;
}
oprofile_running = 0;
- pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+ pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
}
/* handle the perfmon overflow vector */
int dev_match = 0;
int id_match = 0;
- if (dev == NULL && id == NULL)
+ if (dev == NULL || id == NULL)
return NULL;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
- if (dev && dev == p->dev)
+ if (dev == p->dev)
dev_match++;
if (strcmp(id, p->name) == 0)
id_match++;
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
- unsigned int ret;
return (in_be32(®s->status) & (1 << (31 - 23))) ? 1 : 0;
-
- return ret;
}
static void
static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
{
+ struct irq_desc *desc = get_irq_desc(virq);
u32 ctrl_reg, type;
int irq;
int l2irq;
type = 0;
}
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+
ctrl_reg = in_be32(&intr->ctrl);
ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
ctrl_reg |= (type << (22 - (l2irq * 2)));
}
static struct irq_chip mpc52xx_extirq_irqchip = {
- .typename = " MPC52xx IRQ[0-3] ",
+ .typename = "MPC52xx External",
.mask = mpc52xx_extirq_mask,
.unmask = mpc52xx_extirq_unmask,
.ack = mpc52xx_extirq_ack,
#
obj-y := misc.o usb.o
obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
chip-selects, Ethernet/USB PHY's power and various other small
on-board peripherals.
+config MCU_MPC8349EMITX
+ tristate "MPC8349E-mITX MCU driver"
+ depends on I2C && PPC_83xx
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to enable soft power-off functionality on the Freescale
+ boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+ also register MCU GPIOs with the generic GPIO API, so you'll able
+ to use MCU pins as GPIOs.
+
endmenu
err = beat_downcount_of_interrupt(irq_plug);
if (err != 0) {
if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
- panic("Failed to downcount IRQ! Error = %16lx", err);
+ panic("Failed to downcount IRQ! Error = %16llx", err);
printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
}
hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
if (!hose->cfg_addr)
goto error;
- pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
+ pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
if (of_address_to_resource(node, 2, &r))
hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
if (!hose->cfg_data)
goto error;
- pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
+ pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
hose->ops = &celleb_epci_ops;
*/
if (np && size < lmb_end_of_DRAM()) {
printk(KERN_WARNING "iommu: force-enabled, dma window"
- " (%ldMB) smaller than total memory (%ldMB)\n",
+ " (%ldMB) smaller than total memory (%lldMB)\n",
size >> 20, lmb_end_of_DRAM() >> 20);
return -ENODEV;
}
addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
archdata->dma_data = (void *)addr;
- dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
+ dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
}
static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
/* Todo: do some nicer parsing of bits and based on them go down
* to other sub-units FIRs and not only IIC
*/
- printk(KERN_ERR "Global Checkstop FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global Checkstop FIR : 0x%016llx\n",
in_be64(&pregs->checkstop_fir));
- printk(KERN_ERR "Global Recoverable FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global Recoverable FIR : 0x%016llx\n",
in_be64(&pregs->checkstop_fir));
- printk(KERN_ERR "Global MachineCheck FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n",
in_be64(&pregs->spec_att_mchk_fir));
if (iregs == NULL)
return;
- printk(KERN_ERR "IOC FIR : 0x%016lx\n",
+ printk(KERN_ERR "IOC FIR : 0x%016llx\n",
in_be64(&iregs->ioc_fir));
}
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
- pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+ pr_debug("%s: adding SLB[%d] 0x%016llx 0x%016llx\n",
__func__, slbe, slb->vsid, slb->esid);
out_be64(&priv2->slb_index_W, slbe);
{
int ret;
- pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
+ pr_debug("%s, %llx, %lx\n", __func__, dsisr, ea);
/*
* Handle kernel space hash faults immediately. User hash
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
- pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
+ pr_debug("%s: invalid syscall #%lld", __func__, s->nr_ret);
return -ENOSYS;
}
return spufs_coredump_read[num].read(ctx, buffer, size, off);
data = spufs_coredump_read[num].get(ctx);
- ret = snprintf(buffer, size, "0x%.16lx", data);
+ ret = snprintf(buffer, size, "0x%.16llx", data);
if (ret >= size)
return size;
return ++ret; /* count trailing NULL */
spuctx_switch_state(ctx, SPU_UTIL_IOWAIT);
- pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea,
+ pr_debug("ctx %p: ea %016llx, dsisr %016llx state %d\n", ctx, ea,
dsisr, ctx->state);
ctx->stats.hash_flt++;
static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
{
- pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+ pr_debug("queueing DMA %x %llx %x %x %x\n", cmd->lsa,
cmd->ea, cmd->size, cmd->tag, cmd->cmd);
switch (cmd->cmd) {
}
if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
- pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+ pr_debug("invalid DMA alignment, ea %llx lsa %x\n",
cmd->ea, cmd->lsa);
return -EIO;
}
}
seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
- " %c %lx %lx %lx %lx %x %x\n",
+ " %c %llx %llx %llx %llx %x %x\n",
ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
ctx->flags,
ctx->sched_flags,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
{
rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce);
if (rc)
- panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+ panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
rc);
index++;
uaddr += TCE_PAGE_SIZE;
while (npages--) {
rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0);
if (rc)
- panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+ panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
rc);
index++;
}
#include <asm/pmac_low_i2c.h>
#include <asm/pmac_pfunc.h>
-#define DEBUG
+#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
goto fail_rights;
}
- pr_debug("%s:%d: pu_id %lu, rights %lu(%lxh)\n",
+ pr_debug("%s:%d: pu_id %llu, rights %llu(%llxh)\n",
__func__, __LINE__, dev->lpm.pu_id, dev->lpm.rights,
dev->lpm.rights);
return -ENODEV;
}
- pr_debug("%s:%u: (%u:%u:%u): port %lu blk_size %lu num_blocks %lu "
+ pr_debug("%s:%u: (%u:%u:%u): port %llu blk_size %llu num_blocks %llu "
"num_regions %u\n", __func__, __LINE__, repo->bus_index,
repo->dev_index, repo->dev_type, port, blk_size, num_blocks,
num_regions);
result = -ENODEV;
goto fail_read_region;
}
- pr_debug("%s:%u: region %u: id %u start %lu size %lu\n",
+ pr_debug("%s:%u: region %u: id %u start %llu size %llu\n",
__func__, __LINE__, i, id, start, size);
p->regions[i].id = id;
if (rem)
break;
}
- pr_warning("%s:%u: device %lu:%lu not found\n", __func__, __LINE__,
+ pr_warning("%s:%u: device %llu:%llu not found\n", __func__, __LINE__,
bus_id, dev_id);
return;
found:
if (retries)
- pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
+ pr_debug("%s:%u: device %llu:%llu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
ps3_setup_dynamic_device(&repo);
res = lv1_storage_get_async_status(PS3_NOTIFICATION_DEV_ID, &tag,
&status);
if (tag != dev->tag)
- pr_err("%s:%u: tag mismatch, got %lx, expected %lx\n",
+ pr_err("%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
- pr_err("%s:%u: res %d status 0x%lx\n", __func__, __LINE__, res,
+ pr_err("%s:%u: res %d status 0x%llx\n", __func__, __LINE__, res,
status);
} else {
- pr_debug("%s:%u: completed, status 0x%lx\n", __func__,
+ pr_debug("%s:%u: completed, status 0x%llx\n", __func__,
__LINE__, status);
dev->lv1_status = status;
complete(&dev->done);
}
if (dev->lv1_status) {
- pr_err("%s:%u: %s not completed, status 0x%lx\n", __func__,
+ pr_err("%s:%u: %s not completed, status 0x%llx\n", __func__,
__LINE__, op, dev->lv1_status);
return -EIO;
}
if (res)
break;
- pr_debug("%s:%u: notify event type 0x%lx bus id %lu dev id %lu"
- " type %lu port %lu\n", __func__, __LINE__,
+ pr_debug("%s:%u: notify event type 0x%llx bus id %llu dev id %llu"
+ " type %llu port %llu\n", __func__, __LINE__,
notify_event->event_type, notify_event->bus_id,
notify_event->dev_id, notify_event->dev_type,
notify_event->dev_port);
if (notify_event->event_type != notify_region_probe ||
notify_event->bus_id != dev.sbd.bus_id) {
- pr_warning("%s:%u: bad notify_event: event %lu, "
- "dev_id %lu, dev_type %lu\n",
+ pr_warning("%s:%u: bad notify_event: event %llu, "
+ "dev_id %llu, dev_type %llu\n",
__func__, __LINE__, notify_event->event_type,
notify_event->dev_id,
notify_event->dev_type);
if (result) {
/* all entries bolted !*/
- pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+ pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%llx r=%llx\n",
__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
BUG();
}
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
* that there is no constraint on how many in this set an individual thread
* can acquire.
+ *
+ * The mask is declared as unsigned long so we can use set/clear_bit on it.
*/
#define PS3_BMP_MINALIGN 64
struct {
u64 status;
u64 unused_1[3];
- u64 mask;
+ unsigned long mask;
u64 unused_2[3];
};
u64 ipi_debug_brk_mask;
struct ps3_private *pd = get_irq_chip_data(virq);
unsigned long flags;
- pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+ pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, virq);
local_irq_save(flags);
struct ps3_private *pd = get_irq_chip_data(virq);
unsigned long flags;
- pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+ pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, virq);
local_irq_save(flags);
{
const struct ps3_private *pd = get_irq_chip_data(virq);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
set_irq_chip_data(virq, NULL);
int result;
const struct ps3_private *pd = get_irq_chip_data(virq);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(virq);
int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
result = lv1_construct_event_receive_port(&outlet);
unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
u64 lpar_addr;
BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
unsigned int class, unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
BUG_ON(class > 2);
pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
- pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+ pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
plug &= 0x3f;
if (unlikely(plug == NO_IRQ)) {
- pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
+ pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
pd->thread_id = get_hard_smp_processor_id(cpu);
spin_lock_init(&pd->bmp.lock);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, bmp %lxh\n",
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
lv1_get_logical_ppe_id(&ppe_id);
result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
- DBG("%s:%d: lv1_configure_irq_state_bitmap (%lu:%lu/%d) %s\n", __func__,
+ DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__,
__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
}
*/
struct mem_region {
- unsigned long base;
- unsigned long size;
+ u64 base;
+ u64 size;
unsigned long offset;
};
*/
struct map {
- unsigned long total;
- unsigned long vas_id;
- unsigned long htab_size;
+ u64 total;
+ u64 vas_id;
+ u64 htab_size;
struct mem_region rm;
struct mem_region r1;
};
static void __maybe_unused _debug_dump_map(const struct map *m,
const char *func, int line)
{
- DBG("%s:%d: map.total = %lxh\n", func, line, m->total);
- DBG("%s:%d: map.rm.size = %lxh\n", func, line, m->rm.size);
- DBG("%s:%d: map.vas_id = %lu\n", func, line, m->vas_id);
- DBG("%s:%d: map.htab_size = %lxh\n", func, line, m->htab_size);
- DBG("%s:%d: map.r1.base = %lxh\n", func, line, m->r1.base);
+ DBG("%s:%d: map.total = %llxh\n", func, line, m->total);
+ DBG("%s:%d: map.rm.size = %llxh\n", func, line, m->rm.size);
+ DBG("%s:%d: map.vas_id = %llu\n", func, line, m->vas_id);
+ DBG("%s:%d: map.htab_size = %llxh\n", func, line, m->htab_size);
+ DBG("%s:%d: map.r1.base = %llxh\n", func, line, m->r1.base);
DBG("%s:%d: map.r1.offset = %lxh\n", func, line, m->r1.offset);
- DBG("%s:%d: map.r1.size = %lxh\n", func, line, m->r1.size);
+ DBG("%s:%d: map.r1.size = %llxh\n", func, line, m->r1.size);
}
static struct map map;
void __init ps3_mm_vas_create(unsigned long* htab_size)
{
int result;
- unsigned long start_address;
- unsigned long size;
- unsigned long access_right;
- unsigned long max_page_size;
- unsigned long flags;
+ u64 start_address;
+ u64 size;
+ u64
Code Review / linux-2.6.git / commitdiff