]> nv-tegra.nvidia Code Review - linux-2.6.git/commitdiff
remove unused header file: drivers/serial/crisv10.h
authorRobert P. J. Day <rpjday@mindspring.com>
Sun, 6 May 2007 21:50:55 +0000 (14:50 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Mon, 7 May 2007 19:13:00 +0000 (12:13 -0700)
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/serial/crisv10.h [deleted file]

diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
deleted file mode 100644 (file)
index 4a23340..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * serial.h: Arch-dep definitions for the Etrax100 serial driver.
- *
- * Copyright (C) 1998, 1999, 2000 Axis Communications AB
- */
-
-#ifndef _ETRAX_SERIAL_H
-#define _ETRAX_SERIAL_H
-
-#include <linux/circ_buf.h>
-#include <asm/termios.h>
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-#define SERIAL_RECV_DESCRIPTORS 8
-
-struct etrax_recv_buffer {
-       struct etrax_recv_buffer *next;
-       unsigned short length;
-       unsigned char error;
-       unsigned char pad;
-
-       unsigned char buffer[0];
-};
-
-struct e100_serial {
-       int                     baud;
-       volatile u8             *port; /* R_SERIALx_CTRL */
-       u32                     irq;  /* bitnr in R_IRQ_MASK2 for dmaX_descr */
-
-       /* Output registers */
-       volatile u8             *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
-       volatile u32            *ofirstadr;   /* adr to R_DMA_CHx_FIRST */
-       volatile u8             *ocmdadr;     /* adr to R_DMA_CHx_CMD */
-       const volatile u8       *ostatusadr;  /* adr to R_DMA_CHx_STATUS */
-
-       /* Input registers */
-       volatile u8             *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
-       volatile u32            *ifirstadr;   /* adr to R_DMA_CHx_FIRST */
-       volatile u8             *icmdadr;     /* adr to R_DMA_CHx_CMD */
-       volatile u32            *idescradr;   /* adr to R_DMA_CHx_DESCR */
-
-       int                     flags;  /* defined in tty.h */
-
-       u8                      rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
-       u8                      tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
-       u8                      iseteop; /* bit number for R_SET_EOP for the input dma */
-       int                     enabled; /* Set to 1 if the port is enabled in HW config */
-
-       u8              dma_out_enabled:1; /* Set to 1 if DMA should be used */
-       u8              dma_in_enabled:1;  /* Set to 1 if DMA should be used */
-
-       /* end of fields defined in rs_table[] in .c-file */
-       u8              uses_dma_in;  /* Set to 1 if DMA is used */
-       u8              uses_dma_out; /* Set to 1 if DMA is used */
-       u8              forced_eop;   /* a fifo eop has been forced */
-       int                     baud_base;     /* For special baudrates */
-       int                     custom_divisor; /* For special baudrates */
-       struct etrax_dma_descr  tr_descr;
-       struct etrax_dma_descr  rec_descr[SERIAL_RECV_DESCRIPTORS];
-       int                     cur_rec_descr;
-
-       volatile int            tr_running; /* 1 if output is running */
-
-       struct tty_struct       *tty;
-       int                     read_status_mask;
-       int                     ignore_status_mask;
-       int                     x_char; /* xon/xoff character */
-       int                     close_delay;
-       unsigned short          closing_wait;
-       unsigned short          closing_wait2;
-       unsigned long           event;
-       unsigned long           last_active;
-       int                     line;
-       int                     type;  /* PORT_ETRAX */
-       int                     count;      /* # of fd on device */
-       int                     blocked_open; /* # of blocked opens */
-       struct circ_buf         xmit;
-       struct etrax_recv_buffer *first_recv_buffer;
-       struct etrax_recv_buffer *last_recv_buffer;
-       unsigned int            recv_cnt;
-       unsigned int            max_recv_cnt;
-
-       struct work_struct      work;
-       struct async_icount     icount;   /* error-statistics etc.*/
-       struct ktermios         normal_termios;
-       struct ktermios         callout_termios;
-#ifdef DECLARE_WAITQUEUE
-       wait_queue_head_t       open_wait;
-       wait_queue_head_t       close_wait;
-#else
-       struct wait_queue       *open_wait;
-       struct wait_queue       *close_wait;
-#endif
-
-       unsigned long           char_time_usec;       /* The time for 1 char, in usecs */
-       unsigned long           flush_time_usec;      /* How often we should flush */
-       unsigned long           last_tx_active_usec;  /* Last tx usec in the jiffies */
-       unsigned long           last_tx_active;       /* Last tx time in jiffies */
-       unsigned long           last_rx_active_usec;  /* Last rx usec in the jiffies */
-       unsigned long           last_rx_active;       /* Last rx time in jiffies */
-
-       int                     break_detected_cnt;
-       int                     errorcode;
-
-#ifdef CONFIG_ETRAX_RS485
-       struct rs485_control    rs485;  /* RS-485 support */
-#endif
-};
-
-/* this PORT is not in the standard serial.h. it's not actually used for
- * anything since we only have one type of async serial-port anyway in this
- * system.
- */
-
-#define PORT_ETRAX 1
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP  0
-
-#endif /* __KERNEL__ */
-
-#endif /* !_ETRAX_SERIAL_H */