M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
-T: quilt http://www.linuxtv.org/download/quilt/
+T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
BUSLOGIC SCSI DRIVER
M: linux-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
-T: quilt http://www.linuxtv.org/download/quilt/
+T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Supported
EATA-DMA SCSI DRIVER
M: mchehab@brturbo.com.br
L: video4linux-list@redhat.com
W: http://linuxtv.org
-T: quilt http://www.linuxtv.org/download/quilt/
+T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
W1 DALLAS'S 1-WIRE BUS
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 15
-EXTRAVERSION =-rc6
+EXTRAVERSION =
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
.long sys_wait4
/* 115 */ .long sys_swapoff
.long sys_sysinfo
- .long sys_ipc_wrapper
+ .long sys_ipc
.long sys_fsync
.long sys_sigreturn_wrapper
/* 120 */ .long sys_clone_wrapper
.long sys_fremovexattr
.long sys_tkill
.long sys_sendfile64
-/* 240 */ .long sys_futex_wrapper
+/* 240 */ .long sys_futex
.long sys_sched_setaffinity
.long sys_sched_getaffinity
.long sys_io_setup
.long sys_fstatfs64
.long sys_tgkill
.long sys_utimes
-/* 270 */ .long sys_arm_fadvise64_64_wrapper
+/* 270 */ .long sys_arm_fadvise64_64
.long sys_pciconfig_iobase
.long sys_pciconfig_read
.long sys_pciconfig_write
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
- .long sys_mbind_wrapper
+ .long sys_mbind
/* 320 */ .long sys_get_mempolicy
.long sys_set_mempolicy
__syscall_end:
.globl __kuser_helper_start
__kuser_helper_start:
+/*
+ * Reference prototype:
+ *
+ * void __kernel_memory_barrier(void)
+ *
+ * Input:
+ *
+ * lr = return address
+ *
+ * Output:
+ *
+ * none
+ *
+ * Clobbered:
+ *
+ * the Z flag might be lost
+ *
+ * Definition and user space usage example:
+ *
+ * typedef void (__kernel_dmb_t)(void);
+ * #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0)
+ *
+ * Apply any needed memory barrier to preserve consistency with data modified
+ * manually and __kuser_cmpxchg usage.
+ *
+ * This could be used as follows:
+ *
+ * #define __kernel_dmb() \
+ * asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
+ * : : : "lr","cc" )
+ */
+
+__kuser_memory_barrier: @ 0xffff0fa0
+
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
+ mov pc, lr
+
+ .align 5
+
/*
* Reference prototype:
*
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
+ * Note: this routine already includes memory barriers as needed.
+ *
* For example, a user space atomic_add implementation could look like this:
*
* #define atomic_add(ptr, val) \
#else
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
rsbs r0, r3, #0
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
mov pc, lr
#endif
#endif
enable_irq
- str r4, [sp, #-S_OFF]! @ push fifth arg
+ stmdb sp!, {r4, r5} @ push fifth and sixth args
get_thread_info tsk
ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
* Special system call wrappers
*/
@ r0 = syscall number
-@ r5 = syscall table
+@ r8 = syscall table
.type sys_syscall, #function
sys_syscall:
eor scno, r0, #__NR_SYSCALL_BASE
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
-sys_futex_wrapper:
- str r5, [sp, #4] @ push sixth arg
- b sys_futex
-
-sys_arm_fadvise64_64_wrapper:
- str r5, [sp, #4] @ push r5 to stack
- b sys_arm_fadvise64_64
-
-sys_mbind_wrapper:
- str r5, [sp, #4]
- b sys_mbind
-
-sys_ipc_wrapper:
- str r5, [sp, #4] @ push sixth arg
- b sys_ipc
-
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
* offset, we return EINVAL.
struct pt_regs ptregs;
ptregs = *(struct pt_regs *)
- ((unsigned long)tsk->thread_info+THREAD_SIZE - sizeof(ptregs));
+ ((unsigned long)tsk->thread_info +
+ /* see comments in copy_thread() about -8 */
+ THREAD_SIZE - sizeof(ptregs) - 8);
ptregs.xcs &= 0xffff;
ptregs.xds &= 0xffff;
ptregs.xes &= 0xffff;
obj-y := i386.o
obj-$(CONFIG_PCI_BIOS) += pcbios.o
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o
obj-$(CONFIG_PCI_DIRECT) += direct.o
pci-y := fixup.o
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 14:36:20 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:26 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 14:39:20 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:30 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 14:38:09 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:32 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 14:38:58 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:36 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Fri Nov 18 16:23:24 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:38 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc1
-# Tue Nov 15 14:36:55 2005
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 20 15:59:40 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
ld r13,GPR13(r1) /* returning to usermode */
1: ld r2,GPR2(r1)
li r12,MSR_RI
- andc r10,r10,r12
- mtmsrd r10,1 /* clear MSR.RI */
+ andc r11,r10,r12
+ mtmsrd r11,1 /* clear MSR.RI */
ld r1,GPR1(r1)
mtlr r4
mtcr r5
#undef KB
#undef MB
-void __init htab_initialize_secondary(void)
+void htab_initialize_secondary(void)
{
if (!platform_is_lpar())
mtspr(SPRN_SDR1, _SDR1);
.set_affinity = xics_set_affinity
};
-static struct hw_interrupt_type xics_8259_pic = {
- .typename = " XICS/8259",
- .ack = xics_mask_and_ack_irq,
-};
-
/* This is used to map real irq numbers to virtual */
static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC);
/* for sanity, this had better be < NR_IRQS - 16 */
if (vec == xics_irq_8259_cascade_real) {
irq = i8259_irq(regs);
- if (irq == -1) {
- /* Spurious cascaded interrupt. Still must ack xics */
- xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
-
- irq = -1;
- }
+ xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
} else if (vec == XICS_IRQ_SPURIOUS) {
irq = -1;
} else {
xics_irq_8259_cascade_real = *ireg;
xics_irq_8259_cascade
= virt_irq_create_mapping(xics_irq_8259_cascade_real);
+ i8259_init(0, 0);
of_node_put(np);
}
#endif /* CONFIG_SMP */
}
- xics_8259_pic.enable = i8259_pic.enable;
- xics_8259_pic.disable = i8259_pic.disable;
- xics_8259_pic.end = i8259_pic.end;
- for (i = 0; i < 16; ++i)
- get_irq_desc(i)->handler = &xics_8259_pic;
- for (; i < NR_IRQS; ++i)
+ for (i = irq_offset_value(); i < NR_IRQS; ++i)
get_irq_desc(i)->handler = &xics_pic;
xics_setup_cpu();
no_action, 0, "8259 cascade", NULL))
printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 "
"cascade\n");
- i8259_init(0, 0);
}
return 0;
}
}
#ifdef CONFIG_CPM2
-static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
{
while((irq = cpm2_get_irq(regs)) >= 0)
__do_IRQ(irq, regs);
+ return IRQ_HANDLED;
}
static struct irqaction cpm2_irqaction = {
depends on SMP
default "32"
+config SPARC
+ bool
+ default y
+
# Identify this as a Sparc32 build
config SPARC32
bool
ret = ARG_MAX;
break;
case _SC_CHILD_MAX:
- ret = CHILD_MAX;
+ ret = -1; /* no limit */
break;
case _SC_CLK_TCK:
ret = HZ;
}
_end = . ;
PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
/DISCARD/ : { *(.exit.text) *(.exit.data) *(.exitcall.exit) }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
}
mainmenu "Linux/UltraSPARC Kernel Configuration"
+config SPARC
+ bool
+ default y
+
config SPARC64
bool
default y
NEW_GCC := $(call cc-option-yn, -m64 -mcmodel=medlow)
NEW_GAS := $(shell if $(LD) -V 2>&1 | grep 'elf64_sparc' > /dev/null; then echo y; else echo n; fi)
UNDECLARED_REGS := $(shell if $(CC) -c -x assembler /dev/null -Wa,--help | grep undeclared-regs > /dev/null; then echo y; else echo n; fi; )
-INLINE_LIMIT := $(call cc-option-yn, -m64 -finline-limit=100000)
export NEW_GCC
AFLAGS += -m64 -mcpu=ultrasparc $(CC_UNDECL)
endif
-ifeq ($(INLINE_LIMIT),y)
- CFLAGS := $(CFLAGS) -finline-limit=100000
-endif
-
ifeq ($(CONFIG_MCOUNT),y)
CFLAGS := $(CFLAGS) -pg
endif
ret = ARG_MAX;
break;
case _SC_CHILD_MAX:
- ret = CHILD_MAX;
+ ret = -1; /* no limit */
break;
case _SC_CLK_TCK:
ret = HZ;
}
_end = . ;
PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
/DISCARD/ : { *(.exit.text) *(.exit.data) *(.exitcall.exit) }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
}
{
switch (id) {
case SOLARIS_CONFIG_NGROUPS: return NGROUPS_MAX;
- case SOLARIS_CONFIG_CHILD_MAX: return CHILD_MAX;
+ case SOLARIS_CONFIG_CHILD_MAX: return -1; /* no limit */
case SOLARIS_CONFIG_OPEN_FILES: return OPEN_MAX;
case SOLARIS_CONFIG_POSIX_VER: return 199309;
case SOLARIS_CONFIG_PAGESIZE: return PAGE_SIZE;
if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
if (exit_with == 2)
- printk("check_ptrace : child exited with status 2. "
+ printf("check_ptrace : child exited with status 2. "
"Serious trouble happening! Try updating your "
"host skas patch!\nDisabling SYSEMU support.");
- printk("check_ptrace : child exited with exitcode %d, while "
+ printf("check_ptrace : child exited with exitcode %d, while "
"expecting %d; status 0x%x", exit_with,
exitcode, status);
if (mustpanic)
panic("\n");
else
- printk("\n");
+ printf("\n");
ret = -1;
}
void *stack;
int pid, n, status, count=0;
- printk("Checking syscall emulation patch for ptrace...");
+ printf("Checking syscall emulation patch for ptrace...");
sysemu_supported = 0;
pid = start_ptraced_child(&stack);
goto fail_stopped;
sysemu_supported = 1;
- printk("OK\n");
+ printf("OK\n");
set_using_sysemu(!force_sysemu_disabled);
- printk("Checking advanced syscall emulation patch for ptrace...");
+ printf("Checking advanced syscall emulation patch for ptrace...");
pid = start_ptraced_child(&stack);
if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
goto fail_stopped;
sysemu_supported = 2;
- printk("OK\n");
+ printf("OK\n");
if ( !force_sysemu_disabled )
set_using_sysemu(sysemu_supported);
fail:
stop_ptraced_child(pid, stack, 1, 0);
fail_stopped:
- printk("missing\n");
+ printf("missing\n");
}
static void __init check_ptrace(void)
void *stack;
int pid, syscall, n, status;
- printk("Checking that ptrace can change system call numbers...");
+ printf("Checking that ptrace can change system call numbers...");
pid = start_ptraced_child(&stack);
if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
}
}
stop_ptraced_child(pid, stack, 0, 1);
- printk("OK\n");
+ printf("OK\n");
check_sysemu();
}
int have_devanon = 0;
+/* Runs on boot kernel stack - already safe to use printk. */
+
void check_devanon(void)
{
int fd;
int sym(void); \
EXPORT_SYMBOL(sym);
+extern void readdir64(void) __attribute__((weak));
+EXPORT_SYMBOL(readdir64);
+extern void truncate64(void) __attribute__((weak));
+EXPORT_SYMBOL(truncate64);
+
#ifdef SUBARCH_i386
EXPORT_SYMBOL(vsyscall_ehdr);
EXPORT_SYMBOL(vsyscall_end);
-obj-y = bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o semaphore.o signal.o sigcontext.o stub.o stub_segv.o \
- syscalls.o sysrq.o sys_call_table.o
+obj-y := bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
+ ptrace_user.o semaphore.o signal.o sigcontext.o syscalls.o sysrq.o \
+ sys_call_table.o
+
+obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_MODULES) += module.o
#XXX: why into lib-y?
lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \
- ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \
- stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o
+ ptrace.o ptrace_user.o sigcontext.o signal.o syscalls.o \
+ syscall_table.o sysrq.o thunk.o
+lib-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
obj-y := ksyms.o
obj-$(CONFIG_MODULES) += module.o um_module.o
}
/* Compute holes */
- w = 0;
+ w = start_pfn;
for (i = 0; i < MAX_NR_ZONES; i++) {
unsigned long s = w;
w += z[i];
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o common.o
# mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o
obj-$(CONFIG_NUMA) += k8-bus.o
return err;
}
+
+/* Send basic block requests */
+static int __blk_send_generic(request_queue_t *q, struct gendisk *bd_disk, int cmd, int data)
+{
+ struct request *rq;
+ int err;
+
+ rq = blk_get_request(q, WRITE, __GFP_WAIT);
+ rq->flags |= REQ_BLOCK_PC;
+ rq->data = NULL;
+ rq->data_len = 0;
+ rq->timeout = BLK_DEFAULT_TIMEOUT;
+ memset(rq->cmd, 0, sizeof(rq->cmd));
+ rq->cmd[0] = cmd;
+ rq->cmd[4] = data;
+ rq->cmd_len = 6;
+ err = blk_execute_rq(q, bd_disk, rq, 0);
+ blk_put_request(rq);
+
+ return err;
+}
+
+static inline int blk_send_start_stop(request_queue_t *q, struct gendisk *bd_disk, int data)
+{
+ return __blk_send_generic(q, bd_disk, GPCMD_START_STOP_UNIT, data);
+}
+
int scsi_cmd_ioctl(struct file *file, struct gendisk *bd_disk, unsigned int cmd, void __user *arg)
{
request_queue_t *q;
- struct request *rq;
- int close = 0, err;
+ int err;
q = bd_disk->queue;
if (!q)
err = sg_scsi_ioctl(file, q, bd_disk, arg);
break;
case CDROMCLOSETRAY:
- close = 1;
+ err = blk_send_start_stop(q, bd_disk, 0x03);
+ break;
case CDROMEJECT:
- rq = blk_get_request(q, WRITE, __GFP_WAIT);
- rq->flags |= REQ_BLOCK_PC;
- rq->data = NULL;
- rq->data_len = 0;
- rq->timeout = BLK_DEFAULT_TIMEOUT;
- memset(rq->cmd, 0, sizeof(rq->cmd));
- rq->cmd[0] = GPCMD_START_STOP_UNIT;
- rq->cmd[4] = 0x02 + (close != 0);
- rq->cmd_len = 6;
- err = blk_execute_rq(q, bd_disk, rq, 0);
- blk_put_request(rq);
+ err = blk_send_start_stop(q, bd_disk, 0x02);
break;
default:
err = -ENOTTY;
}
}
- cx->usage++;
-
#ifdef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
* detection phase, to work cleanly with logical CPU hotplug.
*/
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
- !pr->flags.has_cst && acpi_fadt.plvl2_up)
- cx->type = ACPI_STATE_C1;
+ !pr->flags.has_cst && !acpi_fadt.plvl2_up)
+ cx = &pr->power.states[ACPI_STATE_C1];
#endif
+
+ cx->usage++;
+
/*
* Sleep:
* ------
next_state = pr->power.state;
+#ifdef CONFIG_HOTPLUG_CPU
+ /* Don't do promotion/demotion */
+ if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+ !pr->flags.has_cst && !acpi_fadt.plvl2_up) {
+ next_state = cx;
+ goto end;
+ }
+#endif
+
/*
* Promotion?
* ----------
* Check for P_LVL2_UP flag before entering C2 and above on
* an SMP system.
*/
- if ((num_online_cpus() > 1) && acpi_fadt.plvl2_up)
+ if ((num_online_cpus() > 1) && !acpi_fadt.plvl2_up)
return_VALUE(-ENODEV);
#endif
{
struct cpufreq_policy policy;
if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu))
- return -ENODEV;
- return 0;
+ return 0;
+ return 1;
}
static int acpi_thermal_cpufreq_increase(unsigned int cpu)
/* Find a free owner ID */
- for (i = 0; i < 32; i++) {
- if (!(acpi_gbl_owner_id_mask & (1 << i))) {
+ for (i = 0; i < 64; i++) {
+ if (!(acpi_gbl_owner_id_mask & (1ULL << i))) {
ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
- "Current owner_id mask: %8.8X New ID: %2.2X\n",
+ "Current owner_id mask: %16.16LX New ID: %2.2X\n",
acpi_gbl_owner_id_mask,
(unsigned int)(i + 1)));
- acpi_gbl_owner_id_mask |= (1 << i);
+ acpi_gbl_owner_id_mask |= (1ULL << i);
*owner_id = (acpi_owner_id) (i + 1);
goto exit;
}
*/
*owner_id = 0;
status = AE_OWNER_ID_LIMIT;
- ACPI_REPORT_ERROR(("Could not allocate new owner_id (32 max), AE_OWNER_ID_LIMIT\n"));
+ ACPI_REPORT_ERROR(("Could not allocate new owner_id (64 max), AE_OWNER_ID_LIMIT\n"));
exit:
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 32
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 64
*
******************************************************************************/
/* Zero is not a valid owner_iD */
- if ((owner_id == 0) || (owner_id > 32)) {
+ if ((owner_id == 0) || (owner_id > 64)) {
ACPI_REPORT_ERROR(("Invalid owner_id: %2.2X\n", owner_id));
return_VOID;
}
/* Free the owner ID only if it is valid */
- if (acpi_gbl_owner_id_mask & (1 << owner_id)) {
- acpi_gbl_owner_id_mask ^= (1 << owner_id);
+ if (acpi_gbl_owner_id_mask & (1ULL << owner_id)) {
+ acpi_gbl_owner_id_mask ^= (1ULL << owner_id);
}
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI)
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
- unsigned int mem_size;
-
DRM_DEBUG("\n");
dev_priv->is_pci = init->is_pci;
+ dev_priv->fb_location) >> 10));
dev_priv->gart_size = init->gart_size;
-
- mem_size = RADEON_READ(RADEON_CONFIG_MEMSIZE);
- if (mem_size == 0)
- mem_size = 0x800000;
- dev_priv->gart_vm_start = dev_priv->fb_location + mem_size;
+ dev_priv->gart_vm_start = dev_priv->fb_location
+ + RADEON_READ(RADEON_CONFIG_APER_SIZE);
#if __OS_HAS_AGP
if (!dev_priv->is_pci)
}
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
- defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC32) ||\
- defined(CONFIG_SPARC64) || defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
+ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
(defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
extern int mac_hid_mouse_emulate_buttons(int, int, int);
#endif /* CONFIG_MAC_EMUMOUSEBTN */
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
static int sparc_l1_a_state = 0;
extern void sun_do_break(void);
#endif
if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
sysrq_alt = down;
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
if (keycode == KEY_STOP)
sparc_l1_a_state = down;
#endif
return;
}
#endif
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
if (keycode == KEY_A && sparc_l1_a_state) {
sparc_l1_a_state = 0;
sun_do_break();
while (this_round > 1) {
unsigned short w;
- w = get_unaligned(((const unsigned short *)con_buf0));
+ w = get_unaligned(((unsigned short *)con_buf0));
vcs_scr_writew(vc, w, org++);
con_buf0 += 2;
this_round -= 2;
config FC4_SOC
tristate "Sun SOC/Sbus"
- depends on FC4!=n && (SPARC32 || SPARC64)
+ depends on FC4!=n && SPARC
help
Serial Optical Channel is an interface card with one or two Fibre
Optic ports, each of which can be connected to a disk array. Note
config FC4_SOCAL
tristate "Sun SOC+ (aka SOCAL)"
- depends on FC4!=n && (SPARC32 || SPARC64)
+ depends on FC4!=n && SPARC
---help---
Serial Optical Channel Plus is an interface card with up to two
Fibre Optic ports. This card supports FC Arbitrated Loop (usually
be called pluto.
config SCSI_FCAL
- tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64
+ tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC
depends on FC4!=n && SCSI
help
This driver drives FC-AL disks connected through a Fibre Channel
config SCSI_FCAL
prompt "Generic FC-AL disk driver"
- depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
+ depends on FC4!=n && SCSI && !SPARC
endmenu
input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8);
input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
- input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0);
serio_set_drvdata(serio, warrior);
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
- depends on PCI && (SPARC32 || SPARC64)
+ depends on PCI && SPARC
help
Say Y here if you want the standard Speaker on Sparc PCI systems
to be used for bells and whistles.
input_sync(dev);
- if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
+ if (++sermouse->count == 5)
sermouse->count = 0;
}
#include "i8042-ip22io.h"
#elif defined(CONFIG_PPC)
#include "i8042-ppcio.h"
-#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#elif defined(CONFIG_SPARC)
#include "i8042-sparcio.h"
#elif defined(CONFIG_X86) || defined(CONFIG_IA64)
#include "i8042-x86ia64io.h"
if (temp_combi >= ((state0->mpu.tmax + 8) << 16)) {
printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n",
temp_combi >> 16);
- state0->overtemp = CPU_MAX_OVERTEMP;
+ state0->overtemp += CPU_MAX_OVERTEMP / 4;
} else if (temp_combi > (state0->mpu.tmax << 16))
state0->overtemp++;
else
if (state0->overtemp > 0) {
state0->rpm = state0->mpu.rmaxn_exhaust_fan;
state0->intake_rpm = intake = state0->mpu.rmaxn_intake_fan;
- pump = state0->pump_min;
+ pump = state0->pump_max;
goto do_set_fans;
}
printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum"
" (%d) !\n",
state->index, temp >> 16);
- state->overtemp = CPU_MAX_OVERTEMP;
+ state->overtemp += CPU_MAX_OVERTEMP / 4;
} else if (temp > (state->mpu.tmax << 16))
state->overtemp++;
else
printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum"
" (%d) !\n",
state->index, temp >> 16);
- state->overtemp = CPU_MAX_OVERTEMP;
+ state->overtemp = CPU_MAX_OVERTEMP / 4;
} else if (temp > (state->mpu.tmax << 16))
state->overtemp++;
else
if (p == NULL && mddev->raid_disks == 0)
return 0;
if (mddev->level >= 0)
- return sprintf(page, "RAID-%d\n", mddev->level);
+ return sprintf(page, "raid%d\n", mddev->level);
else
return sprintf(page, "%s\n", p->name);
}
}
}
+ if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000e)
+ av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, SpdifSwitch, 1, 0); // SPDIF on
+
ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right);
if (ret < 0)
printk("dvb-ttpci:cannot set volume :%d\n",ret);
MainSwitch,
ADSwitch,
SendDiSEqC,
- SetRegister
+ SetRegister,
+ SpdifSwitch
};
enum av7110_request_command {
static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
{
- u8 fmt;
-
- switch (std) {
- /* zero is autodetect */
- case 0: fmt = 0x0; break;
- /* default ntsc to ntsc-m */
- case V4L2_STD_NTSC:
- case V4L2_STD_NTSC_M: fmt = 0x1; break;
- case V4L2_STD_NTSC_M_JP: fmt = 0x2; break;
- case V4L2_STD_NTSC_443: fmt = 0x3; break;
- case V4L2_STD_PAL: fmt = 0x4; break;
- case V4L2_STD_PAL_M: fmt = 0x5; break;
- case V4L2_STD_PAL_N: fmt = 0x6; break;
- case V4L2_STD_PAL_Nc: fmt = 0x7; break;
- case V4L2_STD_PAL_60: fmt = 0x8; break;
- case V4L2_STD_SECAM: fmt = 0xc; break;
- default:
- return -ERANGE;
+ u8 fmt=0; /* zero is autodetect */
+
+ /* First tests should be against specific std */
+ if (std & V4L2_STD_NTSC_M_JP) {
+ fmt=0x2;
+ } else if (std & V4L2_STD_NTSC_443) {
+ fmt=0x3;
+ } else if (std & V4L2_STD_PAL_M) {
+ fmt=0x5;
+ } else if (std & V4L2_STD_PAL_N) {
+ fmt=0x6;
+ } else if (std & V4L2_STD_PAL_Nc) {
+ fmt=0x7;
+ } else if (std & V4L2_STD_PAL_60) {
+ fmt=0x8;
+ } else {
+ /* Then, test against generic ones */
+ if (std & V4L2_STD_NTSC) {
+ fmt=0x1;
+ } else if (std & V4L2_STD_PAL) {
+ fmt=0x4;
+ } else if (std & V4L2_STD_SECAM) {
+ fmt=0xc;
+ }
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
- dev->name, __FUNCTION__, ##arg); } while (0)
+ dev->name, __FUNCTION__ , ##arg); } while (0)
static unsigned int reg_debug;
module_param(reg_debug,int,0644);
#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
printk(KERN_INFO "%s %s :"fmt, \
- dev->name, __FUNCTION__, ##arg); } while (0)
+ dev->name, __FUNCTION__ , ##arg); } while (0)
static unsigned int isoc_debug;
module_param(isoc_debug,int,0644);
#define em28xx_isocdbg(fmt, arg...) do {\
if (isoc_debug) \
printk(KERN_INFO "%s %s :"fmt, \
- dev->name, __FUNCTION__, ##arg); } while (0)
+ dev->name, __FUNCTION__ , ##arg); } while (0)
static int alt = EM28XX_PINOUT;
module_param(alt, int, 0644);
printk(fmt, ##args); } while (0)
#define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
printk(KERN_DEBUG "%s at %s: " fmt, \
- dev->name, __FUNCTION__, ##args); } while (0)
+ dev->name, __FUNCTION__ , ##args); } while (0)
/*
* em2800_i2c_send_max4()
#define em28xx_videodbg(fmt, arg...) do {\
if (video_debug) \
printk(KERN_INFO "%s %s :"fmt, \
- dev->name, __FUNCTION__, ##arg); } while (0)
+ dev->name, __FUNCTION__ , ##arg); } while (0)
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
/* printk macros */
#define em28xx_err(fmt, arg...) do {\
- printk(KERN_ERR fmt, ##arg); } while (0)
+ printk(KERN_ERR fmt , ##arg); } while (0)
#define em28xx_errdev(fmt, arg...) do {\
printk(KERN_ERR "%s: "fmt,\
- dev->name, ##arg); } while (0)
+ dev->name , ##arg); } while (0)
#define em28xx_info(fmt, arg...) do {\
printk(KERN_INFO "%s: "fmt,\
- dev->name, ##arg); } while (0)
+ dev->name , ##arg); } while (0)
#define em28xx_warn(fmt, arg...) do {\
printk(KERN_WARNING "%s: "fmt,\
- dev->name, ##arg); } while (0)
+ dev->name , ##arg); } while (0)
inline static int em28xx_audio_source(struct em28xx *dev, int input)
{
static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
{
struct saa7127_state *state = i2c_get_clientdata(client);
- u16 cc = data->data[0] << 8 | data->data[1];
+ u16 cc = data->data[1] << 8 | data->data[0];
int enable = (data->line != 0);
if (enable && (data->field != 0 || data->line != 21))
if (state->cc_enable != enable) {
saa7127_dbg("Turn CC %s\n", enable ? "on" : "off");
saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
- (enable << 6) | 0x11);
+ (state->xds_enable << 7) | (enable << 6) | 0x11);
state->cc_enable = enable;
}
if (!enable)
if (state->xds_enable != enable) {
saa7127_dbg("Turn XDS %s\n", enable ? "on" : "off");
saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
- (enable << 7) | 0x11);
+ (enable << 7) | (state->cc_enable << 6) | 0x11);
state->xds_enable = enable;
}
if (!enable)
config VIDEO_SAA7134
tristate "Philips SAA7134 support"
- depends on VIDEO_DEV && PCI && I2C && SOUND && SND
+ depends on VIDEO_DEV && PCI && I2C
select VIDEO_BUF
select VIDEO_IR
select VIDEO_TUNER
select CRC32
- select SND_PCM_OSS
---help---
This is a video4linux driver for Philips SAA713x based
TV cards.
To compile this driver as a module, choose M here: the
module will be called saa7134.
+config VIDEO_SAA7134_ALSA
+ tristate "Philips SAA7134 DMA audio support"
+ depends on VIDEO_SAA7134 && SND
+ select SND_PCM_OSS
+ ---help---
+ This is a video4linux driver for direct (DMA) audio in
+ Philips SAA713x based TV cards using ALSA
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7134-alsa.
+
+config VIDEO_SAA7134_OSS
+ tristate "Philips SAA7134 DMA audio support (OSS, DEPRECATED)"
+ depends on VIDEO_SAA7134 && SOUND_PRIME && !VIDEO_SAA7134_ALSA
+ ---help---
+ This is a video4linux driver for direct (DMA) audio in
+ Philips SAA713x based TV cards using OSS
+
+ This is deprecated in favor of the ALSA module
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7134-oss.
+
config VIDEO_SAA7134_DVB
tristate "DVB/ATSC Support for saa7134 based TV cards"
depends on VIDEO_SAA7134 && DVB_CORE
saa7134-video.o saa7134-input.o
obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \
- saa6752hs.o saa7134-alsa.o \
- saa7134-oss.o
+ saa6752hs.o
+
+obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o
+obj-$(CONFIG_VIDEO_SAA7134_OSS) += saa7134-oss.o
+
obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
EXTRA_CFLAGS += -I$(src)/..
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
#define dprintk(fmt, arg...) if (debug) \
- printk(KERN_DEBUG "%s/alsa: " fmt, dev->name, ## arg)
+ printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
struct saa7134_dev *dev = NULL;
struct list_head *list;
+ if (!dmasound_init && !dmasound_exit) {
+ dmasound_init = alsa_device_init;
+ dmasound_exit = alsa_device_exit;
+ } else {
+ printk(KERN_WARNING "saa7134 ALSA: can't load, DMA sound handler already assigned (probably to OSS)\n");
+ return -EBUSY;
+ }
+
printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n");
list_for_each(list,&saa7134_devlist) {
}
}
- dmasound_init = alsa_device_init;
- dmasound_exit = alsa_device_exit;
-
if (dev == NULL)
printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n");
snd_card_free(snd_saa7134_cards[idx]);
}
+ dmasound_init = NULL;
+ dmasound_exit = NULL;
printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n");
return;
}
-module_init(saa7134_alsa_init);
+/* We initialize this late, to make sure the sound system is up and running */
+late_initcall(saa7134_alsa_init);
module_exit(saa7134_alsa_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ricardo Cerqueira");
struct saa7134_dev *dev = NULL;
struct list_head *list;
+ if (!dmasound_init && !dmasound_exit) {
+ dmasound_init = oss_device_init;
+ dmasound_exit = oss_device_exit;
+ } else {
+ printk(KERN_WARNING "saa7134 OSS: can't load, DMA sound handler already assigned (probably to ALSA)\n");
+ return -EBUSY;
+ }
+
printk(KERN_INFO "saa7134 OSS driver for DMA sound loaded\n");
+
list_for_each(list,&saa7134_devlist) {
dev = list_entry(list, struct saa7134_dev, devlist);
if (dev->dmasound.priv_data == NULL) {
if (dev == NULL)
printk(KERN_INFO "saa7134 OSS: no saa7134 cards found\n");
- dmasound_init = oss_device_init;
- dmasound_exit = oss_device_exit;
-
return 0;
}
}
+ dmasound_init = NULL;
+ dmasound_exit = NULL;
+
printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n");
return;
}
-module_init(saa7134_oss_init);
+/* We initialize this late, to make sure the sound system is up and running */
+late_initcall(saa7134_oss_init);
module_exit(saa7134_oss_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
{ TUNER_ABSENT, "TCL 2002MI_3H"},
{ TUNER_TCL_2002N, "TCL 2002N 5H"},
/* 100-109 */
- { TUNER_ABSENT, "Philips FMD1216ME"},
+ { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"},
{ TUNER_TEA5767, "Philips TEA5768HL FM Radio"},
{ TUNER_ABSENT, "Panasonic ENV57H12D5"},
{ TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"},
md->block_bits = card->csd.read_blkbits;
blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
- set_capacity(md->disk, card->csd.capacity);
+
+ /*
+ * The CSD capacity field is in units of read_blkbits.
+ * set_capacity takes units of 512 bytes.
+ */
+ set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9));
}
out:
return md;
mmc_card_claim_host(card);
cmd.opcode = MMC_SET_BLOCKLEN;
- cmd.arg = 1 << card->csd.read_blkbits;
+ cmd.arg = 1 << md->block_bits;
cmd.flags = MMC_RSP_R1;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_card_release_host(card);
if (err)
goto out;
- printk(KERN_INFO "%s: %s %s %dKiB %s\n",
+ printk(KERN_INFO "%s: %s %s %luKiB %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
- (card->csd.capacity << card->csd.read_blkbits) / 1024,
- mmc_blk_readonly(card)?"(ro)":"");
+ get_capacity(md->disk) >> 1, mmc_blk_readonly(card)?"(ro)":"");
mmc_set_drvdata(card, md);
add_disk(md->disk);
config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
- depends on (SPARC32 || SPARC64) && MTD_CFI
+ depends on SPARC && MTD_CFI
help
This provides a 'mapping' driver which supports the way in
which user-programmable flash chips are connected on various
* trademarks of NVIDIA Corporation in the United States and other
* countries.
*
- * Copyright (C) 2003,4 Manfred Spraul
+ * Copyright (C) 2003,4,5 Manfred Spraul
* Copyright (C) 2004 Andrew de Quincey (wol support)
* Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane
* IRQ rate fixes, bigendian fixes, cleanups, verification)
* 0.45: 18 Sep 2005: Remove nv_stop/start_rx from every link check
* 0.46: 20 Oct 2005: Add irq optimization modes.
* 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan.
+ * 0.48: 24 Dec 2005: Disable TSO, bugfix for pci_map_single
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.47"
+#define FORCEDETH_VERSION "0.48"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
} else {
skb = np->rx_skbuff[nr];
}
- np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len,
- PCI_DMA_FROMDEVICE);
+ np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data,
+ skb->end-skb->data, PCI_DMA_FROMDEVICE);
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
wmb();
wmb();
if (np->rx_skbuff[i]) {
pci_unmap_single(np->pci_dev, np->rx_dma[i],
- np->rx_skbuff[i]->len,
+ np->rx_skbuff[i]->end-np->rx_skbuff[i]->data,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(np->rx_skbuff[i]);
np->rx_skbuff[i] = NULL;
* the performance.
*/
pci_unmap_single(np->pci_dev, np->rx_dma[i],
- np->rx_skbuff[i]->len,
+ np->rx_skbuff[i]->end-np->rx_skbuff[i]->data,
PCI_DMA_FROMDEVICE);
{
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
#ifdef NETIF_F_TSO
- dev->features |= NETIF_F_TSO;
+ /* disabled dev->features |= NETIF_F_TSO; */
#endif
}
#include <asm/irq.h>
#include <asm/uaccess.h>
+MODULE_DESCRIPTION("PHY library");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
static struct phy_driver genphy_driver;
extern int mdio_bus_init(void);
extern void mdio_bus_exit(void);
if (copy_from_user(&uprog, arg, sizeof(uprog)))
return -EFAULT;
- if (uprog.len > BPF_MAXINSNS)
- return -EINVAL;
-
if (!uprog.len) {
*p = NULL;
return 0;
return 0;
}
-static void __devexit gem_remove_one(struct pci_dev *pdev)
+static void gem_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
.name = GEM_MODULE_NAME,
.id_table = gem_pci_tbl,
.probe = gem_init_one,
- .remove = __devexit_p(gem_remove_one),
+ .remove = gem_remove_one,
#ifdef CONFIG_PM
.suspend = gem_suspend,
.resume = gem_resume,
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.45"
-#define DRV_MODULE_RELDATE "Dec 13, 2005"
+#define DRV_MODULE_VERSION "3.47"
+#define DRV_MODULE_RELDATE "Dec 28, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
{ "interrupt test (offline)" },
};
+static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
+{
+ writel(val, tp->regs + off);
+}
+
+static u32 tg3_read32(struct tg3 *tp, u32 off)
+{
+ return (readl(tp->regs + off));
+}
+
static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
{
unsigned long flags;
return val;
}
-static void _tw32_flush(struct tg3 *tp, u32 off, u32 val)
+/* usec_wait specifies the wait time in usec when writing to certain registers
+ * where it is unsafe to read back the register without some delay.
+ * GRC_LOCAL_CTRL is one example if the GPIOs are toggled to switch power.
+ * TG3PCI_CLOCK_CTRL is another example if the clock frequencies are changed.
+ */
+static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait)
{
- tp->write32(tp, off, val);
- if (!(tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) &&
- !(tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) &&
- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
- tp->read32(tp, off); /* flush */
+ if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) ||
+ (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ /* Non-posted methods */
+ tp->write32(tp, off, val);
+ else {
+ /* Posted method */
+ tg3_write32(tp, off, val);
+ if (usec_wait)
+ udelay(usec_wait);
+ tp->read32(tp, off);
+ }
+ /* Wait again after the read for the posted method to guarantee that
+ * the wait time is met.
+ */
+ if (usec_wait)
+ udelay(usec_wait);
}
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
readl(mbox);
}
-static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
-{
- writel(val, tp->regs + off);
-}
-
-static u32 tg3_read32(struct tg3 *tp, u32 off)
-{
- return (readl(tp->regs + off));
-}
-
#define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val)
#define tw32_mailbox_f(reg, val) tw32_mailbox_flush(tp, (reg), (val))
#define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val)
#define tr32_mailbox(reg) tp->read32_mbox(tp, reg)
#define tw32(reg,val) tp->write32(tp, reg, val)
-#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val))
+#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val), 0)
+#define tw32_wait_f(reg,val,us) _tw32_flush(tp,(reg),(val), (us))
#define tr32(reg) tp->read32(tp, reg)
static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
if (orig_clock_ctrl & CLOCK_CTRL_625_CORE) {
- tw32_f(TG3PCI_CLOCK_CTRL,
- clock_ctrl | CLOCK_CTRL_625_CORE);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL,
+ clock_ctrl | CLOCK_CTRL_625_CORE, 40);
}
} else if ((orig_clock_ctrl & CLOCK_CTRL_44MHZ_CORE) != 0) {
- tw32_f(TG3PCI_CLOCK_CTRL,
- clock_ctrl |
- (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK));
- udelay(40);
- tw32_f(TG3PCI_CLOCK_CTRL,
- clock_ctrl | (CLOCK_CTRL_ALTCLK));
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL,
+ clock_ctrl |
+ (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK),
+ 40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL,
+ clock_ctrl | (CLOCK_CTRL_ALTCLK),
+ 40);
}
- tw32_f(TG3PCI_CLOCK_CTRL, clock_ctrl);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL, clock_ctrl, 40);
}
#define PHY_BUSY_LOOPS 5000
if ((tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) != 0)
return;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
- tp_peer = pci_get_drvdata(tp->pdev_peer);
- if (!tp_peer)
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
+ struct net_device *dev_peer;
+
+ dev_peer = pci_get_drvdata(tp->pdev_peer);
+ if (!dev_peer)
BUG();
+ tp_peer = netdev_priv(dev_peer);
}
-
if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 ||
(tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
(tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- (GRC_LCLCTRL_GPIO_OE0 |
- GRC_LCLCTRL_GPIO_OE1 |
- GRC_LCLCTRL_GPIO_OE2 |
- GRC_LCLCTRL_GPIO_OUTPUT0 |
- GRC_LCLCTRL_GPIO_OUTPUT1));
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ (GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OE2 |
+ GRC_LCLCTRL_GPIO_OUTPUT0 |
+ GRC_LCLCTRL_GPIO_OUTPUT1),
+ 100);
} else {
u32 no_gpio2;
- u32 grc_local_ctrl;
+ u32 grc_local_ctrl = 0;
if (tp_peer != tp &&
(tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0)
return;
+ /* Workaround to prevent overdrawing Amps. */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+ ASIC_REV_5714) {
+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ grc_local_ctrl, 100);
+ }
+
/* On 5753 and variants, GPIO2 cannot be used. */
no_gpio2 = tp->nic_sram_data_cfg &
NIC_SRAM_DATA_CFG_NO_GPIO2;
- grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OE2 |
GRC_LCLCTRL_GPIO_OUTPUT1 |
grc_local_ctrl &= ~(GRC_LCLCTRL_GPIO_OE2 |
GRC_LCLCTRL_GPIO_OUTPUT2);
}
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- grc_local_ctrl);
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ grc_local_ctrl, 100);
grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT0;
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- grc_local_ctrl);
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ grc_local_ctrl, 100);
if (!no_gpio2) {
grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT2;
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- grc_local_ctrl);
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ grc_local_ctrl, 100);
}
}
} else {
(tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0)
return;
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- (GRC_LCLCTRL_GPIO_OE1 |
- GRC_LCLCTRL_GPIO_OUTPUT1));
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ (GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OUTPUT1), 100);
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- (GRC_LCLCTRL_GPIO_OE1));
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ GRC_LCLCTRL_GPIO_OE1, 100);
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- (GRC_LCLCTRL_GPIO_OE1 |
- GRC_LCLCTRL_GPIO_OUTPUT1));
- udelay(100);
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+ (GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OUTPUT1), 100);
}
}
}
udelay(100); /* Delay after power state change */
/* Switch out of Vaux if it is not a LOM */
- if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)) {
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
- udelay(100);
- }
+ if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
+ tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
return 0;
base_val |= (CLOCK_CTRL_RXCLK_DISABLE |
CLOCK_CTRL_TXCLK_DISABLE);
- tw32_f(TG3PCI_CLOCK_CTRL, base_val |
- CLOCK_CTRL_ALTCLK |
- CLOCK_CTRL_PWRDOWN_PLL133);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK |
+ CLOCK_CTRL_PWRDOWN_PLL133, 40);
} else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
/* do nothing */
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE;
}
- tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits1);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits1,
+ 40);
- tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2,
+ 40);
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
u32 newbits3;
newbits3 = CLOCK_CTRL_44MHZ_CORE;
}
- tw32_f(TG3PCI_CLOCK_CTRL,
- tp->pci_clock_ctrl | newbits3);
- udelay(40);
+ tw32_wait_f(TG3PCI_CLOCK_CTRL,
+ tp->pci_clock_ctrl | newbits3, 40);
}
}
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
- tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+ tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
}
}
GET_REG32_LOOP(BUFMGR_MODE, 0x58);
GET_REG32_LOOP(RDMAC_MODE, 0x08);
GET_REG32_LOOP(WDMAC_MODE, 0x08);
- GET_REG32_LOOP(RX_CPU_BASE, 0x280);
- GET_REG32_LOOP(TX_CPU_BASE, 0x280);
+ GET_REG32_1(RX_CPU_MODE);
+ GET_REG32_1(RX_CPU_STATE);
+ GET_REG32_1(RX_CPU_PGMCTR);
+ GET_REG32_1(RX_CPU_HWBKPT);
+ GET_REG32_1(TX_CPU_MODE);
+ GET_REG32_1(TX_CPU_STATE);
+ GET_REG32_1(TX_CPU_PGMCTR);
GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110);
GET_REG32_LOOP(FTQ_RESET, 0x120);
GET_REG32_LOOP(MSGINT_MODE, 0x0c);
u32 offset;
u32 len;
} mem_tbl_570x[] = {
- { 0x00000000, 0x01000},
+ { 0x00000000, 0x00b50},
{ 0x00002000, 0x1c000},
{ 0xffffffff, 0x00000}
}, mem_tbl_5705[] = {
{ 0x00000100, 0x0000c},
{ 0x00000200, 0x00008},
- { 0x00000b50, 0x00400},
{ 0x00004000, 0x00800},
{ 0x00006000, 0x01000},
{ 0x00008000, 0x02000},
return str;
}
-static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp)
+static struct pci_dev * __devinit tg3_find_peer(struct tg3 *tp)
{
struct pci_dev *peer;
unsigned int func, devnr = tp->pdev->devfn & ~7;
tp->rx_pending = 63;
}
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
- tp->pdev_peer = tg3_find_5704_peer(tp);
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
+ tp->pdev_peer = tg3_find_peer(tp);
err = tg3_get_device_address(tp);
if (err) {
/* 0x280 --> 0x400 unused */
#define RX_CPU_BASE 0x00005000
+#define RX_CPU_MODE 0x00005000
+#define RX_CPU_STATE 0x00005004
+#define RX_CPU_PGMCTR 0x0000501c
+#define RX_CPU_HWBKPT 0x00005034
#define TX_CPU_BASE 0x00005400
+#define TX_CPU_MODE 0x00005400
+#define TX_CPU_STATE 0x00005404
+#define TX_CPU_PGMCTR 0x0000541c
/* Mailboxes */
#define GRCMBOX_INTERRUPT_0 0x00005800 /* 64-bit */
/* orinoco_nortel.c
*
* Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
+ * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
* but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter.
*
* Copyright (C) 2002 Tobias Hoffmann
goto fail_resources;
}
- iomem = pci_iomap(pdev, 3, 0);
+ iomem = pci_iomap(pdev, 2, 0);
if (!iomem) {
err = -ENOMEM;
goto fail_map_io;
static struct pci_device_id nortel_pci_id_table[] = {
/* Nortel emobility PCI */
{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Symbol LA-4123 PCI */
+ {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
{0,},
};
for (i = 0; i < ctx->num_pages; ++i)
free_page((unsigned long)ctx->pages[i]);
kfree(ctx->pages);
- kfree(ctx->elements);
+ if (ctx->elements != NULL)
+ kfree(ctx->elements);
kfree(ctx);
}
/*
*
- * linux/drivers/s390/net/qeth_main.c ($Revision: 1.242 $)
+ * linux/drivers/s390/net/qeth_main.c ($Revision: 1.251 $)
*
* Linux on zSeries OSA Express and HiperSockets support
*
* Frank Pavlic (fpavlic@de.ibm.com) and
* Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.242 $ $Date: 2005/05/04 20:19:18 $
+ * $Revision: 1.251 $ $Date: 2005/05/04 20:19:18 $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "qeth_eddp.h"
#include "qeth_tso.h"
-#define VERSION_QETH_C "$Revision: 1.242 $"
+#define VERSION_QETH_C "$Revision: 1.251 $"
static const char *version = "qeth S/390 OSA-Express driver";
/**
QETH_DBF_TEXT(setup, 3, "setoffl");
QETH_DBF_HEX(setup, 3, &card, sizeof(void *));
-
+
+ netif_carrier_off(card->dev);
recover_flag = card->state;
if (qeth_stop_card(card, recovery_mode) == -ERESTARTSYS){
PRINT_WARN("Stopping card %s interrupted by user!\n",
qeth_schedule_recovery(struct qeth_card *card)
{
QETH_DBF_TEXT(trace,2,"startrec");
-
if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0)
schedule_work(&card->kernel_thread_starter);
}
"IP address reset.\n",
QETH_CARD_IFNAME(card),
card->info.chpid);
- netif_carrier_on(card->dev);
qeth_schedule_recovery(card);
return NULL;
case IPA_CMD_MODCCID:
{
u16 s1, s2;
-QETH_DBF_TEXT(trace,4,"osndipa");
+ QETH_DBF_TEXT(trace,4,"osndipa");
qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2);
s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len);
}
static inline int
-qeth_check_for_inbound_error(struct qeth_qdio_buffer *buf,
- unsigned int qdio_error,
- unsigned int siga_error)
+qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error,
+ unsigned int siga_error, const char *dbftext)
{
- int rc = 0;
-
if (qdio_error || siga_error) {
- QETH_DBF_TEXT(trace, 2, "qdinerr");
- QETH_DBF_TEXT(qerr, 2, "qdinerr");
+ QETH_DBF_TEXT(trace, 2, dbftext);
+ QETH_DBF_TEXT(qerr, 2, dbftext);
QETH_DBF_TEXT_(qerr, 2, " F15=%02X",
- buf->buffer->element[15].flags & 0xff);
+ buf->element[15].flags & 0xff);
QETH_DBF_TEXT_(qerr, 2, " F14=%02X",
- buf->buffer->element[14].flags & 0xff);
+ buf->element[14].flags & 0xff);
QETH_DBF_TEXT_(qerr, 2, " qerr=%X", qdio_error);
QETH_DBF_TEXT_(qerr, 2, " serr=%X", siga_error);
- rc = 1;
+ return 1;
}
- return rc;
+ return 0;
}
static inline struct sk_buff *
for (i = first_element; i < (first_element + count); ++i) {
index = i % QDIO_MAX_BUFFERS_PER_Q;
buffer = &card->qdio.in_q->bufs[index];
- if (!((status == QDIO_STATUS_LOOK_FOR_ERROR) &&
- qeth_check_for_inbound_error(buffer, qdio_err, siga_err)))
+ if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) &&
+ qeth_check_qdio_errors(buffer->buffer,
+ qdio_err, siga_err,"qinerr")))
qeth_process_inbound_buffer(card, buffer, index);
/* clear buffer and give back to hardware */
qeth_put_buffer_pool_entry(card, buffer->pool_entry);
static inline int
qeth_handle_send_error(struct qeth_card *card,
struct qeth_qdio_out_buffer *buffer,
- int qdio_err, int siga_err)
+ unsigned int qdio_err, unsigned int siga_err)
{
int sbalf15 = buffer->buffer->element[15].flags & 0xff;
int cc = siga_err & 3;
QETH_DBF_TEXT(trace, 6, "hdsnderr");
+ qeth_check_qdio_errors(buffer->buffer, qdio_err, siga_err, "qouterr");
switch (cc) {
case 0:
if (qdio_err){
for(i = first_element; i < (first_element + count); ++i){
buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
/*we only handle the KICK_IT error by doing a recovery */
- if (qeth_handle_send_error(card, buffer, qdio_error, siga_error)
+ if (qeth_handle_send_error(card, buffer,
+ qdio_error, siga_error)
== QETH_SEND_ERROR_KICK_IT){
netif_stop_queue(card->dev);
qeth_schedule_recovery(card);
card->qdio.in_buf_pool.buf_count = card->qdio.init_pool.buf_count;
INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list);
INIT_LIST_HEAD(&card->qdio.init_pool.entry_list);
- /* outbound */
}
static int
break;
}
}
+ if (rc && !(VLAN_DEV_INFO(dev)->real_dev->priv == (void *)card))
+ return 0;
+
#endif
return rc;
}
card->data.state = CH_STATE_UP;
card->state = CARD_STATE_UP;
- if (!card->lan_online){
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
- }
+ if (!card->lan_online && netif_carrier_ok(dev))
+ netif_carrier_off(dev);
return 0;
}
struct inet6_dev *in6_dev;
QETH_DBF_TEXT(trace,4,"chkmcv6");
- if ((card->options.layer2 == 0) &&
- (!qeth_is_supported(card, IPA_IPV6)) )
+ if (!qeth_is_supported(card, IPA_IPV6))
return ;
-
in6_dev = in6_dev_get(card->dev);
if (in6_dev == NULL)
return;
QETH_DBF_TEXT_(setup, 2, "6err%d", rc);
goto out_remove;
}
-/*maybe it was set offline without ifconfig down
- * we can also use this state for recovery purposes*/
+ netif_carrier_on(card->dev);
+
qeth_set_allowed_threads(card, 0xffffffff, 0);
if (recover_flag == CARD_STATE_RECOVER)
qeth_start_again(card, recovery_mode);
#include <asm/cio.h>
#include "qeth_mpc.h"
-const char *VERSION_QETH_MPC_C = "$Revision: 1.12 $";
+const char *VERSION_QETH_MPC_C = "$Revision: 1.13 $";
unsigned char IDX_ACTIVATE_READ[]={
0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00,
#include <asm/qeth.h>
-#define VERSION_QETH_MPC_H "$Revision: 1.44 $"
+#define VERSION_QETH_MPC_H "$Revision: 1.46 $"
extern const char *VERSION_QETH_MPC_C;
#define IPA_PDU_HEADER_SIZE 0x40
#define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer+0x0e)
#define QETH_IPA_PDU_LEN_PDU1(buffer) (buffer+0x26)
-#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer+0x2a)
+#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer+0x29)
#define QETH_IPA_PDU_LEN_PDU3(buffer) (buffer+0x3a)
extern unsigned char IPA_PDU_HEADER[];
/*
*
- * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.13 $)
+ * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.16 $)
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to procfs.
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_PROC_C = "$Revision: 1.13 $";
+const char *VERSION_QETH_PROC_C = "$Revision: 1.16 $";
/***** /proc/qeth *****/
#define QETH_PROCFILE_NAME "qeth"
static int
qeth_procfile_seq_match(struct device *dev, void *data)
{
- return 1;
+ return(dev ? 1 : 0);
}
static void *
qeth_procfile_seq_start(struct seq_file *s, loff_t *offset)
{
- struct device *dev;
- loff_t nr;
-
+ struct device *dev = NULL;
+ loff_t nr = 0;
+
down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-
- nr = *offset;
- if (nr == 0)
+ if (*offset == 0)
return SEQ_START_TOKEN;
-
- dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL,
- NULL, qeth_procfile_seq_match);
-
- /* get card at pos *offset */
- nr = *offset;
- while (nr-- > 1 && dev)
+ while (1) {
dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
NULL, qeth_procfile_seq_match);
- return (void *) dev;
+ if (++nr == *offset)
+ break;
+ put_device(dev);
+ }
+ return dev;
}
static void
qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
{
struct device *prev, *next;
-
- if (it == SEQ_START_TOKEN) {
- next = driver_find_device(&qeth_ccwgroup_driver.driver,
- NULL, NULL, qeth_procfile_seq_match);
- if (next)
- (*offset)++;
- return (void *) next;
- }
- prev = (struct device *) it;
+
+ if (it == SEQ_START_TOKEN)
+ prev = NULL;
+ else
+ prev = (struct device *) it;
next = driver_find_device(&qeth_ccwgroup_driver.driver,
prev, NULL, qeth_procfile_seq_match);
- if (next)
- (*offset)++;
+ (*offset)++;
return (void *) next;
}
{
int routing_type = 0;
- if (ipv == 4){
+ if (ipv == 4) {
routing_type = card->options.route4.type;
} else {
#ifdef CONFIG_QETH_IPV6
card->qdio.in_buf_pool.buf_count);
else
seq_printf(s, " +++ LAN OFFLINE +++\n");
+ put_device(device);
}
return 0;
}
static struct proc_dir_entry *qeth_perf_procfile;
#ifdef CONFIG_QETH_PERF_STATS
-
-static void *
-qeth_perf_procfile_seq_start(struct seq_file *s, loff_t *offset)
-{
- struct device *dev = NULL;
- int nr;
-
- down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
- /* get card at pos *offset */
- dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
- qeth_procfile_seq_match);
-
- /* get card at pos *offset */
- nr = *offset;
- while (nr-- > 1 && dev)
- dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
- NULL, qeth_procfile_seq_match);
- return (void *) dev;
-}
-
-static void
-qeth_perf_procfile_seq_stop(struct seq_file *s, void* it)
-{
- up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-}
-
-static void *
-qeth_perf_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
-{
- struct device *prev, *next;
-
- prev = (struct device *) it;
- next = driver_find_device(&qeth_ccwgroup_driver.driver, prev,
- NULL, qeth_procfile_seq_match);
- if (next)
- (*offset)++;
- return (void *) next;
-}
-
static int
qeth_perf_procfile_seq_show(struct seq_file *s, void *it)
{
struct device *device;
struct qeth_card *card;
+
+ if (it == SEQ_START_TOKEN)
+ return 0;
+
device = (struct device *) it;
card = device->driver_data;
seq_printf(s, "For card with devnos %s/%s/%s (%s):\n",
card->perf_stats.outbound_do_qdio_time,
card->perf_stats.outbound_do_qdio_cnt
);
+ put_device(device);
return 0;
}
static struct seq_operations qeth_perf_procfile_seq_ops = {
- .start = qeth_perf_procfile_seq_start,
- .stop = qeth_perf_procfile_seq_stop,
- .next = qeth_perf_procfile_seq_next,
+ .start = qeth_procfile_seq_start,
+ .stop = qeth_procfile_seq_stop,
+ .next = qeth_procfile_seq_next,
.show = qeth_perf_procfile_seq_show,
};
#define qeth_perf_procfile_created 1
#endif /* CONFIG_QETH_PERF_STATS */
-/***** /proc/qeth_ipa_takeover *****/
-#define QETH_IPATO_PROCFILE_NAME "qeth_ipa_takeover"
-static struct proc_dir_entry *qeth_ipato_procfile;
-
-static void *
-qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset)
-{
- struct device *dev;
- loff_t nr;
-
- down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
- /* TODO: finish this */
- /*
- * maybe SEQ_SATRT_TOKEN can be returned for offset 0
- * output driver settings then;
- * else output setting for respective card
- */
-
- dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL,
- qeth_procfile_seq_match);
-
- /* get card at pos *offset */
- nr = *offset;
- while (nr-- > 1 && dev)
- dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev,
- NULL, qeth_procfile_seq_match);
- return (void *) dev;
-}
-
-static void
-qeth_ipato_procfile_seq_stop(struct seq_file *s, void* it)
-{
- up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-}
-
-static void *
-qeth_ipato_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
-{
- struct device *prev, *next;
-
- prev = (struct device *) it;
- next = driver_find_device(&qeth_ccwgroup_driver.driver, prev,
- NULL, qeth_procfile_seq_match);
- if (next)
- (*offset)++;
- return (void *) next;
-}
-
-static int
-qeth_ipato_procfile_seq_show(struct seq_file *s, void *it)
-{
- struct device *device;
- struct qeth_card *card;
-
- /* TODO: finish this */
- /*
- * maybe SEQ_SATRT_TOKEN can be returned for offset 0
- * output driver settings then;
- * else output setting for respective card
- */
- device = (struct device *) it;
- card = device->driver_data;
-
- return 0;
-}
-
-static struct seq_operations qeth_ipato_procfile_seq_ops = {
- .start = qeth_ipato_procfile_seq_start,
- .stop = qeth_ipato_procfile_seq_stop,
- .next = qeth_ipato_procfile_seq_next,
- .show = qeth_ipato_procfile_seq_show,
-};
-
-static int
-qeth_ipato_procfile_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &qeth_ipato_procfile_seq_ops);
-}
-
-static struct file_operations qeth_ipato_procfile_fops = {
- .owner = THIS_MODULE,
- .open = qeth_ipato_procfile_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
int __init
qeth_create_procfs_entries(void)
{
qeth_perf_procfile->proc_fops = &qeth_perf_procfile_fops;
#endif /* CONFIG_QETH_PERF_STATS */
- qeth_ipato_procfile = create_proc_entry(QETH_IPATO_PROCFILE_NAME,
- S_IFREG | 0444, NULL);
- if (qeth_ipato_procfile)
- qeth_ipato_procfile->proc_fops = &qeth_ipato_procfile_fops;
-
if (qeth_procfile &&
- qeth_ipato_procfile &&
qeth_perf_procfile_created)
return 0;
else
remove_proc_entry(QETH_PROCFILE_NAME, NULL);
if (qeth_perf_procfile)
remove_proc_entry(QETH_PERF_PROCFILE_NAME, NULL);
- if (qeth_ipato_procfile)
- remove_proc_entry(QETH_IPATO_PROCFILE_NAME, NULL);
}
-
-/* ONLY FOR DEVELOPMENT! -> make it as module */
-/*
-static void
-qeth_create_sysfs_entries(void)
-{
- struct device *dev;
-
- down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-
- list_for_each_entry(dev, &qeth_ccwgroup_driver.driver.devices,
- driver_list)
- qeth_create_device_attributes(dev);
-
- up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-}
-
-static void
-qeth_remove_sysfs_entries(void)
-{
- struct device *dev;
-
- down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-
- list_for_each_entry(dev, &qeth_ccwgroup_driver.driver.devices,
- driver_list)
- qeth_remove_device_attributes(dev);
-
- up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
-}
-
-static int __init
-qeth_fs_init(void)
-{
- printk(KERN_INFO "qeth_fs_init\n");
- qeth_create_procfs_entries();
- qeth_create_sysfs_entries();
-
- return 0;
-}
-
-static void __exit
-qeth_fs_exit(void)
-{
- printk(KERN_INFO "qeth_fs_exit\n");
- qeth_remove_procfs_entries();
- qeth_remove_sysfs_entries();
-}
-
-
-module_init(qeth_fs_init);
-module_exit(qeth_fs_exit);
-
-MODULE_LICENSE("GPL");
-*/
/*
*
- * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.58 $)
+ * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.60 $)
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to sysfs.
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_SYS_C = "$Revision: 1.58 $";
+const char *VERSION_QETH_SYS_C = "$Revision: 1.60 $";
/*****************************************************************************/
/* */
return -EPERM;
tmp = strsep((char **) &buf, "\n");
- if ((strlen(tmp) > 8) || (strlen(tmp) < 2))
+ if ((strlen(tmp) > 8) || (strlen(tmp) == 0))
return -EINVAL;
card->info.portname[0] = strlen(tmp);
/*
- * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.7 $)
+ * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.8 $)
*
* Header file for qeth TCP Segmentation Offload support.
*
*
* Author(s): Frank Pavlic <fpavlic@de.ibm.com>
*
- * $Revision: 1.7 $ $Date: 2005/05/04 20:19:18 $
+ * $Revision: 1.8 $ $Date: 2005/05/04 20:19:18 $
*
*/
#ifndef __QETH_TSO_H__
else {
u8 *scsicmd = cmd->cmnd;
- if (scsicmd[0] == INQUIRY) {
+ if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
* to indicate to the Linux scsi midlayer this is a modern
* device. 2) Ensure response data format / ATAPI information
* are always correct.
- */
- /* FIXME: do we ever override EVPD pages and the like, with
- * this code?
*/
if (buf[2] == 0) {
buf[2] = 0x5;
return found_target;
}
+struct work_queue_wrapper {
+ struct work_struct work;
+ struct scsi_target *starget;
+};
+
+static void scsi_target_reap_work(void *data) {
+ struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
+ struct scsi_target *starget = wqw->starget;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ unsigned long flags;
+
+ kfree(wqw);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ if (--starget->reap_ref == 0 && list_empty(&starget->devices)) {
+ list_del_init(&starget->siblings);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ transport_remove_device(&starget->dev);
+ device_del(&starget->dev);
+ transport_destroy_device(&starget->dev);
+ put_device(&starget->dev);
+ return;
+
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ return;
+}
+
/**
* scsi_target_reap - check to see if target is in use and destroy if not
*
*/
void scsi_target_reap(struct scsi_target *starget)
{
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
- unsigned long flags;
- spin_lock_irqsave(shost->host_lock, flags);
+ struct work_queue_wrapper *wqw =
+ kzalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
- if (--starget->reap_ref == 0 && list_empty(&starget->devices)) {
- list_del_init(&starget->siblings);
- spin_unlock_irqrestore(shost->host_lock, flags);
- device_del(&starget->dev);
- transport_unregister_device(&starget->dev);
- put_device(&starget->dev);
+ if (!wqw) {
+ starget_printk(KERN_ERR, starget,
+ "Failed to allocate memory in scsi_reap_target()\n");
return;
}
- spin_unlock_irqrestore(shost->host_lock, flags);
+
+ INIT_WORK(&wqw->work, scsi_target_reap_work, wqw);
+ wqw->starget = starget;
+ schedule_work(&wqw->work);
}
/**
{ FC_PORTSTATE_LINKDOWN, "Linkdown" },
{ FC_PORTSTATE_ERROR, "Error" },
{ FC_PORTSTATE_LOOPBACK, "Loopback" },
+ { FC_PORTSTATE_DELETED, "Deleted" },
};
fc_enum_name_search(port_state, fc_port_state, fc_port_state_names)
#define FC_PORTSTATE_MAX_NAMELEN 20
#define FC_MGMTSRVR_PORTID 0x00000a
+static void fc_shost_remove_rports(void *data);
static void fc_timeout_deleted_rport(void *data);
static void fc_scsi_scan_rport(void *data);
static void fc_rport_terminate(struct fc_rport *rport);
fc_host_next_rport_number(shost) = 0;
fc_host_next_target_id(shost) = 0;
+ fc_host_flags(shost) = 0;
+ INIT_WORK(&fc_host_rport_del_work(shost), fc_shost_remove_rports, shost);
return 0;
}
struct fc_internal *i = to_fc_internal(shost->transportt); \
if ((i->f->get_rport_##field) && \
!((rport->port_state == FC_PORTSTATE_BLOCKED) || \
+ (rport->port_state == FC_PORTSTATE_DELETED) || \
(rport->port_state == FC_PORTSTATE_NOTPRESENT))) \
i->f->get_rport_##field(rport); \
return snprintf(buf, sz, format_string, cast rport->field); \
struct Scsi_Host *shost = rport_to_shost(rport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
if ((rport->port_state == FC_PORTSTATE_BLOCKED) || \
+ (rport->port_state == FC_PORTSTATE_DELETED) || \
(rport->port_state == FC_PORTSTATE_NOTPRESENT)) \
return -EBUSY; \
val = simple_strtoul(buf, NULL, 0); \
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
if ((rport->port_state == FC_PORTSTATE_BLOCKED) ||
+ (rport->port_state == FC_PORTSTATE_DELETED) ||
(rport->port_state == FC_PORTSTATE_NOTPRESENT))
return -EBUSY;
val = simple_strtoul(buf, NULL, 0);
rport->maxframe_size = -1;
rport->supported_classes = FC_COS_UNSPECIFIED;
rport->roles = FC_RPORT_ROLE_UNKNOWN;
- rport->port_state = FC_PORTSTATE_NOTPRESENT;
+ rport->port_state = FC_PORTSTATE_DELETED;
/* remove the identifiers that aren't used in the consisting binding */
switch (fc_host_tgtid_bind_type(shost)) {
break;
}
- spin_unlock_irqrestore(shost->host_lock, flags);
-
/*
* As this only occurs if the remote port (scsi target)
* went away and didn't come back - we'll remove
* all attached scsi devices.
+ *
+ * We'll schedule the shost work item to perform the actual removal
+ * to avoid recursion in the different flush calls if we perform
+ * the removal in each target - and there are lots of targets
+ * whose timeouts fire at the same time.
*/
- fc_rport_tgt_remove(rport);
+
+ if ( !(fc_host_flags(shost) & FC_SHOST_RPORT_DEL_SCHEDULED)) {
+ fc_host_flags(shost) |= FC_SHOST_RPORT_DEL_SCHEDULED;
+ scsi_queue_work(shost, &fc_host_rport_del_work(shost));
+ }
+
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
/**
}
+/**
+ * fc_shost_remove_rports - called to remove all rports that are marked
+ * as in a deleted (not connected) state.
+ *
+ * @data: shost whose rports are to be looked at
+ **/
+static void
+fc_shost_remove_rports(void *data)
+{
+ struct Scsi_Host *shost = (struct Scsi_Host *)data;
+ struct fc_rport *rport, *next_rport;
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (fc_host_flags(shost) & FC_SHOST_RPORT_DEL_SCHEDULED) {
+
+ fc_host_flags(shost) &= ~FC_SHOST_RPORT_DEL_SCHEDULED;
+
+restart_search:
+ list_for_each_entry_safe(rport, next_rport,
+ &fc_host_rport_bindings(shost), peers) {
+ if (rport->port_state == FC_PORTSTATE_DELETED) {
+ rport->port_state = FC_PORTSTATE_NOTPRESENT;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ fc_rport_tgt_remove(rport);
+ spin_lock_irqsave(shost->host_lock, flags);
+ goto restart_search;
+ }
+ }
+
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+
MODULE_AUTHOR("Martin Hicks");
MODULE_DESCRIPTION("FC Transport Attributes");
MODULE_LICENSE("GPL");
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on (BROKEN || !(SPARC64 || SPARC32))
+ depends on (BROKEN || !SPARC)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
config SERIAL_SUNCORE
bool
- depends on SPARC32 || SPARC64
+ depends on SPARC
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
default y
config SERIAL_SUNZILOG
tristate "Sun Zilog8530 serial support"
- depends on SPARC32 || SPARC64
+ depends on SPARC
help
This driver supports the Zilog8530 serial ports found on many Sparc
systems. Say Y or M if you want to be able to these serial ports.
config SERIAL_SUNSU
tristate "Sun SU serial support"
- depends on (SPARC32 || SPARC64) && PCI
+ depends on SPARC && PCI
help
This driver supports the 8250 serial ports that run the keyboard and
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
config SERIAL_SUNSAB
tristate "Sun Siemens SAB82532 serial support"
- depends on (SPARC32 || SPARC64) && PCI
+ depends on SPARC && PCI
help
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&uap->port, ch, regs))
+ if (uart_handle_sysrq_char(&uap->port, ch & 255, regs))
goto ignore_char;
uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
if (port->line == 3) /* HWUART */
up->mcr |= UART_MCR_AFE;
else
- up->mcr = 0;
+ up->mcr = 0;
/*
* Allocate the IRQ
int i;
/*
- * First save the UER then disable the interrupts
+ * First save the IER then disable the interrupts
*/
ier = serial_in(up, UART_IER);
serial_out(up, UART_IER, UART_IER_UUE);
mark_quiesced(intf);
} else {
// FIXME else if there's no suspend method, disconnect...
- dev_warn(dev, "no %s?\n", "suspend");
+ dev_warn(dev, "no suspend for driver %s?\n", driver->name);
+ mark_quiesced(intf);
status = 0;
}
return status;
}
if ((dev->driver == NULL) ||
- (dev->driver_data == &usb_generic_driver_data))
+ (dev->driver_data == &usb_generic_driver_data)) {
+ dev->power.power_state.event = PM_EVENT_FREEZE;
return 0;
+ }
intf = to_usb_interface(dev);
driver = to_usb_driver(dev->driver);
mark_quiesced(intf);
}
} else
- dev_warn(dev, "no %s?\n", "resume");
+ dev_warn(dev, "no resume for driver %s?\n", driver->name);
return 0;
}
* values.
*/
input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
- input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
input_dev->mscbit[0] |= BIT(MSC_SERIAL);
input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
- input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
* data comes from.
*/
if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
/* According to the technical support people at Genesys Logic,
* devices using their chips have problems transferring more than
* a Get-Max-LUN request, we won't lose much by setting the
* revision level down to 2. The only devices that would be
* affected are those with sparse LUNs. */
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
config FB_SBUS
bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
+ depends on (FB = y) && SPARC
help
Say Y if you want support for SBUS or UPA based frame buffer device.
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
config FB_PCI
bool "PCI framebuffers"
- depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+ depends on (FB = y) && PCI && SPARC
config FB_IGA
bool "IGA 168x display support"
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !ARCH_VERSATILE
default y
help
Saying Y here will allow you to use Linux in text mode through a
config PROM_CONSOLE
bool "PROM console"
- depends on SPARC32 || SPARC64
+ depends on SPARC
help
Say Y to build a console driver for Sun machines that uses the
terminal emulation built into their console PROMS.
config FONT_8x8
bool "VGA 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS
+ default y if !SPARC && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
provided by the text console 80x50 (and higher) modes).
config FONT_8x16
bool "VGA 8x16 font" if FONTS
depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
- default y if !SPARC32 && !SPARC64 && !FONTS
+ default y if !SPARC && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
provided by the VGA text console 80x25 mode.
config FONT_6x11
bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && MAC
+ default y if !SPARC && !FONTS && MAC
help
Small console font with Macintosh-style high-half glyphs. Some Mac
framebuffer drivers don't support this one at all.
config FONT_PEARL_8x8
bool "Pearl (old m68k) console 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA
+ default y if !SPARC && !FONTS && AMIGA
help
Small console font with PC-style control-character and high-half
glyphs.
config FONT_ACORN_8x8
bool "Acorn console 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN
+ default y if !SPARC && !FONTS && ARM && ARCH_ACORN
help
Small console font with PC-style control characters and high-half
glyphs.
config FONT_MINI_4x6
bool "Mini 4x6 font"
- depends on !SPARC32 && !SPARC64 && FONTS
+ depends on !SPARC && FONTS
config FONT_SUN8x16
bool "Sparc console 8x16 font"
- depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+ depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
help
This is the high resolution console font for Sun machines. Say Y.
config FONT_SUN12x22
bool "Sparc console 12x22 font (not supported by all drivers)"
- depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+ depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
help
This is the high resolution console font for Sun machines with very
big letters (like the letters used in the SPARC PROM). If the
int ud_update_start(struct fb_info *info)
{
struct fbcon_ops *ops = info->fbcon_par;
- u32 xoffset, yoffset;
+ int xoffset, yoffset;
u32 vyres = GETVYRES(ops->p->scrollmode, info);
u32 vxres = GETVXRES(ops->p->scrollmode, info);
int err;
- xoffset = (vxres - info->var.xres) - ops->var.xoffset;
- yoffset = (vyres - info->var.yres) - ops->var.yoffset;
+ xoffset = vxres - info->var.xres - ops->var.xoffset;
+ yoffset = vyres - info->var.yres - ops->var.yoffset;
+ if (yoffset < 0)
+ yoffset += vyres;
ops->var.xoffset = xoffset;
ops->var.yoffset = yoffset;
err = fb_pan_display(info, &ops->var);
/*** hw-related values ***/
+/* Resource Allocation */
+#define INTELFB_FB_ACQUIRED 1
+#define INTELFB_MMIO_ACQUIRED 2
+
/* PCI ids for supported devices */
#define PCI_DEVICE_ID_INTEL_830M 0x3577
#define PCI_DEVICE_ID_INTEL_845G 0x2562
int hwcursor;
int fixed_mode;
int ring_active;
+ int flag;
/* hw cursor */
int cursor_on;
static void __devinit get_initial_mode(struct intelfb_info *dinfo);
static void update_dinfo(struct intelfb_info *dinfo,
struct fb_var_screeninfo *var);
-static int intelfb_get_fix(struct fb_fix_screeninfo *fix,
- struct fb_info *info);
-
static int intelfb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info);
static int intelfb_set_par(struct fb_info *info);
if (dinfo->aperture.virtual)
iounmap((void __iomem *)dinfo->aperture.virtual);
- if (dinfo->mmio_base_phys)
+ if (dinfo->flag & INTELFB_MMIO_ACQUIRED)
release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE);
- if (dinfo->aperture.physical)
+ if (dinfo->flag & INTELFB_FB_ACQUIRED)
release_mem_region(dinfo->aperture.physical,
dinfo->aperture.size);
framebuffer_release(dinfo->info);
cleanup(dinfo);
return -ENODEV;
}
+
+ dinfo->flag |= INTELFB_FB_ACQUIRED;
+
if (!request_mem_region(dinfo->mmio_base_phys,
INTEL_REG_SIZE,
INTELFB_MODULE_NAME)) {
return -ENODEV;
}
+ dinfo->flag |= INTELFB_MMIO_ACQUIRED;
+
/* Get the chipset info. */
dinfo->pci_chipset = pdev->device;
return 1;
info->pixmap.scan_align = 1;
-
+ strcpy(info->fix.id, dinfo->name);
+ info->fix.smem_start = dinfo->fb.physical;
+ info->fix.smem_len = dinfo->fb.size;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type_aux = 0;
+ info->fix.xpanstep = 8;
+ info->fix.ypanstep = 1;
+ info->fix.ywrapstep = 0;
+ info->fix.mmio_start = dinfo->mmio_base_phys;
+ info->fix.mmio_len = INTEL_REG_SIZE;
+ info->fix.accel = FB_ACCEL_I830;
update_dinfo(dinfo, &info->var);
return 0;
dinfo->yres = var->xres;
dinfo->pixclock = var->pixclock;
- intelfb_get_fix(&dinfo->info->fix, dinfo->info);
+ dinfo->info->fix.visual = dinfo->visual;
+ dinfo->info->fix.line_length = dinfo->pitch;
switch (dinfo->bpp) {
case 8:
/* fbops functions */
-static int
-intelfb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
-{
- struct intelfb_info *dinfo = GET_DINFO(info);
-
- DBG_MSG("intelfb_get_fix\n");
-
- memset(fix, 0, sizeof(*fix));
- strcpy(fix->id, dinfo->name);
- fix->smem_start = dinfo->fb.physical;
- fix->smem_len = dinfo->fb.size;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->type_aux = 0;
- fix->visual = dinfo->visual;
- fix->xpanstep = 8;
- fix->ypanstep = 1;
- fix->ywrapstep = 0;
- fix->line_length = dinfo->pitch;
- fix->mmio_start = dinfo->mmio_base_phys;
- fix->mmio_len = INTEL_REG_SIZE;
- fix->accel = FB_ACCEL_I830;
- return 0;
-}
-
/***************************************************************
* fbdev interface *
***************************************************************/
config LOGO_SUN_CLUT224
bool "224-color Sun Linux logo"
- depends on LOGO && (SPARC32 || SPARC64)
+ depends on LOGO && SPARC
default y
config LOGO_SUPERH_MONO
unsigned long off;
int i;
+ if (!(vma->vm_flags & (VM_SHARED | VM_MAYSHARE)))
+ return -EINVAL;
+
size = vma->vm_end - vma->vm_start;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
return -EINVAL;
long long start;
int err = 0;
- start = (long long) (page->index << PAGE_CACHE_SHIFT) + from;
+ start = (((long long) page->index) << PAGE_CACHE_SHIFT) + from;
buffer = kmap(page);
err = write_file(FILE_HOSTFS_I(file)->fd, &start, buffer + from,
to - from);
if(err > 0) err = 0;
+
+ /* Actually, if !err, write_file has added to-from to start, so, despite
+ * the appearance, we are comparing i_size against the _last_ written
+ * location, as we should. */
+
if(!err && (start > inode->i_size))
inode->i_size = start;
int hostfs_link_readpage(struct file *file, struct page *page)
{
char *buffer, *name;
- long long start;
int err;
- start = page->index << PAGE_CACHE_SHIFT;
buffer = kmap(page);
name = inode_name(page->mapping->host, 0);
if(name == NULL) return(-ENOMEM);
inode = fl->fl_file->f_dentry->d_inode;
if (inode->i_sb->s_magic != NFS_SUPER_MAGIC)
continue;
+ if (fl->fl_u.nfs_fl.owner == NULL)
+ continue;
if (fl->fl_u.nfs_fl.owner->host != host)
continue;
if (!(fl->fl_u.nfs_fl.flags & NFS_LCK_GRANTED))
inode = fl->fl_file->f_dentry->d_inode;
if (inode->i_sb->s_magic != NFS_SUPER_MAGIC)
continue;
+ if (fl->fl_u.nfs_fl.owner == NULL)
+ continue;
if (fl->fl_u.nfs_fl.owner->host != host)
continue;
if (!(fl->fl_u.nfs_fl.flags & NFS_LCK_RECLAIM))
if (!count)
goto out;
- if (mapping->nrpages) {
- retval = filemap_fdatawrite(mapping);
- if (retval == 0)
- retval = nfs_wb_all(inode);
- if (retval == 0)
- retval = filemap_fdatawait(mapping);
- if (retval)
- goto out;
- }
+ retval = nfs_sync_mapping(mapping);
+ if (retval)
+ goto out;
retval = nfs_direct_read(inode, ctx, &iov, pos, 1);
if (retval > 0)
if (!count)
goto out;
- if (mapping->nrpages) {
- retval = filemap_fdatawrite(mapping);
- if (retval == 0)
- retval = nfs_wb_all(inode);
- if (retval == 0)
- retval = filemap_fdatawait(mapping);
- if (retval)
- goto out;
- }
+ retval = nfs_sync_mapping(mapping);
+ if (retval)
+ goto out;
retval = nfs_direct_write(inode, ctx, &iov, pos, 1);
if (mapping->nrpages)
* Flush all pending writes before doing anything
* with locks..
*/
- filemap_fdatawrite(filp->f_mapping);
- down(&inode->i_sem);
- nfs_wb_all(inode);
- up(&inode->i_sem);
- filemap_fdatawait(filp->f_mapping);
+ nfs_sync_mapping(filp->f_mapping);
/* NOTE: special case
* If we're signalled while cleaning up locks on process exit, we
* Flush all pending writes before doing anything
* with locks..
*/
- status = filemap_fdatawrite(filp->f_mapping);
- if (status == 0) {
- down(&inode->i_sem);
- status = nfs_wb_all(inode);
- up(&inode->i_sem);
- if (status == 0)
- status = filemap_fdatawait(filp->f_mapping);
- }
- if (status < 0)
+ status = nfs_sync_mapping(filp->f_mapping);
+ if (status != 0)
goto out;
lock_kernel();
* Make sure we clear the cache whenever we try to get the lock.
* This makes locking act as a cache coherency point.
*/
- filemap_fdatawrite(filp->f_mapping);
- down(&inode->i_sem);
- nfs_wb_all(inode); /* we may have slept */
- up(&inode->i_sem);
- filemap_fdatawait(filp->f_mapping);
+ nfs_sync_mapping(filp->f_mapping);
nfs_zap_caches(inode);
out:
rpc_clnt_sigunmask(NFS_CLIENT(inode), &oldset);
return -EINVAL;
/* No mandatory locks over NFS */
- if ((inode->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID)
+ if ((inode->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID &&
+ fl->fl_type != F_UNLCK)
return -ENOLCK;
if (IS_GETLK(cmd))
return 0;
}
+/**
+ * nfs_sync_mapping - helper to flush all mmapped dirty data to disk
+ */
+int nfs_sync_mapping(struct address_space *mapping)
+{
+ int ret;
+
+ if (mapping->nrpages == 0)
+ return 0;
+ unmap_mapping_range(mapping, 0, 0, 0);
+ ret = filemap_fdatawrite(mapping);
+ if (ret != 0)
+ goto out;
+ ret = filemap_fdatawait(mapping);
+ if (ret != 0)
+ goto out;
+ ret = nfs_wb_all(mapping->host);
+out:
+ return ret;
+}
+
/*
* Invalidate the local caches
*/
struct nfs_inode *nfsi = NFS_I(inode);
if (nfsi->cache_validity & NFS_INO_INVALID_DATA) {
- if (S_ISREG(inode->i_mode)) {
- if (filemap_fdatawrite(mapping) == 0)
- filemap_fdatawait(mapping);
- nfs_wb_all(inode);
- }
+ if (S_ISREG(inode->i_mode))
+ nfs_sync_mapping(mapping);
invalidate_inode_pages2(mapping);
spin_lock(&inode->i_lock);
dprintk("nfsd: SETACL(2acl) %s\n", SVCFH_fmt(&argp->fh));
fh = fh_copy(&resp->fh, &argp->fh);
- nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_NOP);
+ nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_SATTR);
if (!nfserr) {
nfserr = nfserrno( nfsd_set_posix_acl(
int nfserr = 0;
fh = fh_copy(&resp->fh, &argp->fh);
- nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_NOP);
+ nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_SATTR);
if (!nfserr) {
nfserr = nfserrno( nfsd_set_posix_acl(
config SUN_PARTITION
bool "Sun partition tables support" if PARTITION_ADVANCED
- default y if (SPARC32 || SPARC64 || SUN3 || SUN3X)
+ default y if (SPARC || SUN3 || SUN3X)
---help---
Like most systems, SunOS uses its own hard disk partition table
format, incompatible with all others. Saying Y here allows you to
ssize_t n, count;
char *start;
struct proc_dir_entry * dp;
+ unsigned long long pos;
+
+ /*
+ * Gaah, please just use "seq_file" instead. The legacy /proc
+ * interfaces cut loff_t down to off_t for reads, and ignore
+ * the offset entirely for writes..
+ */
+ pos = *ppos;
+ if (pos > MAX_NON_LFS)
+ return 0;
+ if (nbytes > MAX_NON_LFS - pos)
+ nbytes = MAX_NON_LFS - pos;
dp = PDE(inode);
if (!(page = (char*) __get_free_page(GFP_KERNEL)))
static loff_t
proc_file_lseek(struct file *file, loff_t offset, int orig)
{
- lock_kernel();
-
- switch (orig) {
- case 0:
- if (offset < 0)
- goto out;
- file->f_pos = offset;
- unlock_kernel();
- return(file->f_pos);
- case 1:
- if (offset + file->f_pos < 0)
- goto out;
- file->f_pos += offset;
- unlock_kernel();
- return(file->f_pos);
- case 2:
- goto out;
- default:
- goto out;
- }
-
-out:
- unlock_kernel();
- return -EINVAL;
+ loff_t retval = -EINVAL;
+ switch (orig) {
+ case 1:
+ offset += file->f_pos;
+ /* fallthrough */
+ case 0:
+ if (offset < 0 || offset > MAX_NON_LFS)
+ break;
+ file->f_pos = retval = offset;
+ }
+ return retval;
}
static int proc_notify_change(struct dentry *dentry, struct iattr *iattr)
return length;
toobig:
- printk(KERN_WARNING "relayfs: event too large (%Zd)\n", length);
- WARN_ON(1);
+ buf->chan->last_toobig = length;
return 0;
}
relay_close_buf(chan->buf[i]);
}
+ if (chan->last_toobig)
+ printk(KERN_WARNING "relayfs: one or more items not logged "
+ "[item size (%Zd) > sub-buffer size (%Zd)]\n",
+ chan->last_toobig, chan->subbuf_size);
+
kref_put(&chan->kref, relay_destroy_channel);
}
ACPI_EXTERN u32 acpi_gbl_rsdp_original_location;
ACPI_EXTERN u32 acpi_gbl_ns_lookup_count;
ACPI_EXTERN u32 acpi_gbl_ps_find_count;
-ACPI_EXTERN u32 acpi_gbl_owner_id_mask;
+ACPI_EXTERN u64 acpi_gbl_owner_id_mask;
ACPI_EXTERN u16 acpi_gbl_pm1_enable_register_save;
ACPI_EXTERN u16 acpi_gbl_global_lock_handle;
ACPI_EXTERN u8 acpi_gbl_debugger_configuration;
-#include <linux/config.h>
-
#ifndef _ASMi386_PARAM_H
#define _ASMi386_PARAM_H
#ifdef __KERNEL__
+# include <linux/config.h>
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
/*
* Returns the number of the first CPU on Node 'node'.
*/
-#define node_to_first_cpu(node) (__ffs(node_to_cpumask(node)))
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
/*
* Determines the node for a given pci bus
-#include <linux/config.h>
-
#ifndef _ASMx86_64_PARAM_H
#define _ASMx86_64_PARAM_H
#ifdef __KERNEL__
+# include <linux/config.h>
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks */
#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
::"a" (rw) : "memory")
#define __build_write_lock_const(rw, helper) \
- asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+ asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
"jnz 2f\n" \
"1:\n" \
LOCK_SECTION_START("") \
#define cpu_to_node(cpu) (cpu_to_node[cpu])
#define parent_node(node) (node)
-#define node_to_first_cpu(node) (__ffs(node_to_cpumask[node]))
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask[node]))
#define node_to_cpumask(node) (node_to_cpumask[node])
#define pcibus_to_node(bus) ((long)(bus->sysdata))
#define pcibus_to_cpumask(bus) node_to_cpumask(pcibus_to_node(bus));
fallback, no routers on link */
#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */
#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */
+#define RTF_ANYCAST 0x00100000 /* Anycast */
#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */
#define RTF_EXPIRES 0x00400000
*/
#include <linux/config.h>
-#include <asm/smp.h> /* cpu_online_map */
+#include <linux/smp.h>
#if !defined(CONFIG_ARCH_S390)
* L. Haag
*
* $Log: r3964.h,v $
+ * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
* Revision 1.3 2001/03/18 13:02:24 dwmw2
* Fix timer usage, use spinlocks properly.
*
#define __LINUX_N_R3964_H__
/* line disciplines for r3964 protocol */
-#include <asm/termios.h>
#ifdef __KERNEL__
+
+#include <linux/param.h>
+
/*
* Common ascii handshake characters:
*/
#define NAK 0x15
/*
- * Timeouts (msecs/10 msecs per timer interrupt):
+ * Timeouts (from milliseconds to jiffies)
*/
-#define R3964_TO_QVZ 550/10
-#define R3964_TO_ZVZ 220/10
-#define R3964_TO_NO_BUF 400/10
-#define R3964_NO_TX_ROOM 100/10
-#define R3964_TO_RX_PANIC 4000/10
+#define R3964_TO_QVZ ((550)*HZ/1000)
+#define R3964_TO_ZVZ ((220)*HZ/1000)
+#define R3964_TO_NO_BUF ((400)*HZ/1000)
+#define R3964_NO_TX_ROOM ((100)*HZ/1000)
+#define R3964_TO_RX_PANIC ((4000)*HZ/1000)
#define R3964_MAX_RETRIES 5
#endif
/*
* linux/fs/nfs/inode.c
*/
+extern int nfs_sync_mapping(struct address_space *mapping);
extern void nfs_zap_caches(struct inode *);
extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
struct nfs_fattr *);
#define preempt_enable() \
do { \
preempt_enable_no_resched(); \
+ barrier(); \
preempt_check_resched(); \
} while (0)
#include <linux/kref.h>
/*
- * Tracks changes to rchan_buf struct
+ * Tracks changes to rchan/rchan_buf structs
*/
-#define RELAYFS_CHANNEL_VERSION 5
+#define RELAYFS_CHANNEL_VERSION 6
/*
* Per-cpu relay channel buffer
struct rchan_callbacks *cb; /* client callbacks */
struct kref kref; /* channel refcount */
void *private_data; /* for user-defined data */
+ size_t last_toobig; /* tried to log event > subbuf size */
struct rchan_buf *buf[NR_CPUS]; /* per-cpu channel buffers */
};
#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE
RTNLGRP_IPV4_ROUTE,
#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE
+ RTNLGRP_NOP1,
RTNLGRP_IPV6_IFADDR,
#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR
RTNLGRP_IPV6_MROUTE,
#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO
RTNLGRP_DECnet_IFADDR,
#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR
+ RTNLGRP_NOP2,
RTNLGRP_DECnet_ROUTE,
#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE
+ RTNLGRP_NOP3,
+ RTNLGRP_NOP4,
RTNLGRP_IPV6_PREFIX,
#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX
__RTNLGRP_MAX
#define IF_RA_MANAGED 0x40
#define IF_RA_RCVD 0x20
#define IF_RS_SENT 0x10
+#define IF_READY 0x80000000
/* prefix flags */
#define IF_PREFIX_ONLINK 0x01
struct in6_addr addr;
int ifindex;
struct ipv6_mc_socklist *next;
+ rwlock_t sflock;
unsigned int sfmode; /* MCAST_{INCLUDE,EXCLUDE} */
struct ip6_sf_socklist *sflist;
};
extern void xfrm_policy_flush(void);
extern int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol);
extern int xfrm_flush_bundles(void);
+extern void xfrm_flush_all_bundles(void);
extern int xfrm_bundle_ok(struct xfrm_dst *xdst, struct flowi *fl, int family);
extern void xfrm_init_pmtu(struct dst_entry *dst);
FC_PORTSTATE_LINKDOWN,
FC_PORTSTATE_ERROR,
FC_PORTSTATE_LOOPBACK,
+ FC_PORTSTATE_DELETED,
};
struct list_head rport_bindings;
u32 next_rport_number;
u32 next_target_id;
+ u8 flags;
+ struct work_struct rport_del_work;
};
+/* values for struct fc_host_attrs "flags" field: */
+#define FC_SHOST_RPORT_DEL_SCHEDULED 0x01
+
+
#define fc_host_node_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->node_name)
#define fc_host_port_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->next_rport_number)
#define fc_host_next_target_id(x) \
(((struct fc_host_attrs *)(x)->shost_data)->next_target_id)
+#define fc_host_flags(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->flags)
+#define fc_host_rport_del_work(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->rport_del_work)
/* The functions by which the transport class and the driver communicate */
bool "Optimize for size (Look out for broken compilers!)"
default y
depends on ARM || H8300 || EXPERIMENTAL
- depends on !SPARC64
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller kernel.
/* hands-off: q will disappear immediately after
* writing q->status.
*/
+ smp_wmb();
q->status = error;
q = n;
} else {
n = q->next;
q->status = IN_WAKEUP;
wake_up_process(q->sleeper); /* doesn't sleep */
+ smp_wmb();
q->status = -EIDRM; /* hands-off q */
q = n;
}
/*
* The waiting task can free the futex_q as soon as this is written,
* without taking any locks. This must come last.
+ *
+ * A memory barrier is required here to prevent the following store
+ * to lock_ptr from getting ahead of the wakeup. Clearing the lock
+ * at the end of wake_up_all() does not prevent this store from
+ * moving.
*/
+ wmb();
q->lock_ptr = NULL;
}
/* module-related sysfs stuff */
-#ifdef CONFIG_MODULES
+#ifdef CONFIG_SYSFS
#define to_module_attr(n) container_of(n, struct module_attribute, attr);
#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen, void **context)
{
- size_t l, len;
-
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
- if (get_user(len, oldlenp))
+ size_t bufsize;
+ if (get_user(bufsize, oldlenp))
return -EFAULT;
- if (len) {
- l = strlen(table->data);
- if (len > l) len = l;
- if (len >= table->maxlen)
+ if (bufsize) {
+ size_t len = strlen(table->data), copied;
+
+ /* This shouldn't trigger for a well-formed sysctl */
+ if (len > table->maxlen)
len = table->maxlen;
- if(copy_to_user(oldval, table->data, len))
- return -EFAULT;
- if(put_user(0, ((char __user *) oldval) + len))
+
+ /* Copy up to a max of bufsize-1 bytes of the string */
+ copied = (len >= bufsize) ? bufsize - 1 : len;
+
+ if (copy_to_user(oldval, table->data, copied) ||
+ put_user(0, (char __user *)(oldval + copied)))
return -EFAULT;
- if(put_user(len, oldlenp))
+ if (put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
- len = newlen;
+ size_t len = newlen;
if (len > table->maxlen)
len = table->maxlen;
if(copy_from_user(table->data, newval, len))
len--;
((char *) table->data)[len] = 0;
}
- return 0;
+ return 1;
}
/*
if (lock->owner && lock->owner != SPINLOCK_OWNER_INIT)
owner = lock->owner;
printk("BUG: spinlock %s on CPU#%d, %s/%d\n",
- msg, smp_processor_id(), current->comm, current->pid);
+ msg, raw_smp_processor_id(),
+ current->comm, current->pid);
printk(" lock: %p, .magic: %08x, .owner: %s/%d, .owner_cpu: %d\n",
lock, lock->magic,
owner ? owner->comm : "<none>",
if (print_once) {
print_once = 0;
printk("BUG: spinlock lockup on CPU#%d, %s/%d, %p\n",
- smp_processor_id(), current->comm, current->pid,
- lock);
+ raw_smp_processor_id(), current->comm,
+ current->pid, lock);
dump_stack();
}
}
if (xchg(&print_once, 0)) {
printk("BUG: rwlock %s on CPU#%d, %s/%d, %p\n", msg,
- smp_processor_id(), current->comm, current->pid, lock);
+ raw_smp_processor_id(), current->comm,
+ current->pid, lock);
dump_stack();
#ifdef CONFIG_SMP
/*
if (print_once) {
print_once = 0;
printk("BUG: read-lock lockup on CPU#%d, %s/%d, %p\n",
- smp_processor_id(), current->comm, current->pid,
- lock);
+ raw_smp_processor_id(), current->comm,
+ current->pid, lock);
dump_stack();
}
}
if (print_once) {
print_once = 0;
printk("BUG: write-lock lockup on CPU#%d, %s/%d, %p\n",
- smp_processor_id(), current->comm, current->pid,
- lock);
+ raw_smp_processor_id(), current->comm,
+ current->pid, lock);
dump_stack();
}
}
addr = SG_ENT_VIRT_ADDRESS(sg);
dev_addr = virt_to_phys(addr);
if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
- sg->dma_address = (dma_addr_t) virt_to_phys(map_single(hwdev, addr, sg->length, dir));
- if (!sg->dma_address) {
+ void *map = map_single(hwdev, addr, sg->length, dir);
+ sg->dma_address = virt_to_bus(map);
+ if (!map) {
/* Don't panic here, we expect map_sg users
to do proper error handling. */
swiotlb_full(hwdev, sg->length, dir, 0);
switch (mode) {
case MPOL_INTERLEAVE:
policy->v.nodes = *nodes;
+ if (nodes_weight(*nodes) == 0) {
+ kmem_cache_free(policy_cache, policy);
+ return ERR_PTR(-EINVAL);
+ }
break;
case MPOL_PREFERRED:
policy->v.preferred_node = first_node(*nodes);
break;
case GET_VLAN_REALDEV_NAME_CMD:
err = vlan_dev_get_realdev_name(args.device1, args.u.device2);
+ if (err)
+ goto out;
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args))) {
err = -EFAULT;
case GET_VLAN_VID_CMD:
err = vlan_dev_get_vid(args.device1, &vid);
+ if (err)
+ goto out;
args.u.VID = vid;
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args))) {
__FUNCTION__, args.cmd);
return -EINVAL;
};
-
+out:
return err;
}
len -= 2;
while (len > 0) {
- int optlen = raw[off+1]+2;
+ int optlen = skb->nh.raw[off+1]+2;
switch (skb->nh.raw[off]) {
case IPV6_TLV_PAD0:
case IPV6_TLV_JUMBO:
if (skb->nh.raw[off+1] != 4 || (off&3) != 2)
goto bad;
-
pkt_len = ntohl(*(u32*)(skb->nh.raw+off+2));
-
+ if (pkt_len <= IPV6_MAXPLEN ||
+ skb->nh.ipv6h->payload_len)
+ goto bad;
if (pkt_len > skb->len - sizeof(struct ipv6hdr))
goto bad;
- if (pkt_len + sizeof(struct ipv6hdr) < skb->len) {
- if (__pskb_trim(skb,
- pkt_len + sizeof(struct ipv6hdr)))
- goto bad;
- if (skb->ip_summed == CHECKSUM_HW)
- skb->ip_summed = CHECKSUM_NONE;
- }
+ if (pskb_trim_rcsum(skb,
+ pkt_len+sizeof(struct ipv6hdr)))
+ goto bad;
break;
default:
if (optlen > len)
if (hdr->nexthdr == NEXTHDR_HOP && check_hbh_len(skb))
goto inhdr_error;
+ nf_bridge_put(skb->nf_bridge);
if ((nf_bridge = nf_bridge_alloc(skb)) == NULL)
return NF_DROP;
setup_pre_routing(skb);
skb->ip_summed = CHECKSUM_NONE;
}
+ nf_bridge_put(skb->nf_bridge);
if ((nf_bridge = nf_bridge_alloc(skb)) == NULL)
return NF_DROP;
setup_pre_routing(skb);
struct sock_filter *ftest;
int pc;
- if (((unsigned int)flen >= (~0U / sizeof(struct sock_filter))) || flen == 0)
+ if (flen == 0 || flen > BPF_MAXINSNS)
return -EINVAL;
/* check the filter code now */
int err;
/* Make sure new filter is there and in the right amounts. */
- if (fprog->filter == NULL || fprog->len > BPF_MAXINSNS)
+ if (fprog->filter == NULL)
return -EINVAL;
fp = sock_kmalloc(sk, fsize+sizeof(*fp), GFP_KERNEL);
struct dccp_sock *dp = dccp_sk(sk);
/*
- * DCCP doesn't use sk_qrite_queue, just sk_send_head
+ * DCCP doesn't use sk_write_queue, just sk_send_head
* for retransmissions
*/
if (sk->sk_send_head != NULL) {
# connection tracking
obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
+obj-$(CONFIG_IP_NF_NAT) += ip_nat.o
# conntrack netlink interface
obj-$(CONFIG_IP_NF_CONNTRACK_NETLINK) += ip_conntrack_netlink.o
# the three instances of ip_tables
obj-$(CONFIG_IP_NF_FILTER) += iptable_filter.o
obj-$(CONFIG_IP_NF_MANGLE) += iptable_mangle.o
-obj-$(CONFIG_IP_NF_NAT) += iptable_nat.o ip_nat.o
+obj-$(CONFIG_IP_NF_NAT) += iptable_nat.o
obj-$(CONFIG_IP_NF_RAW) += iptable_raw.o
# matches
case IPPROTO_UDP:
case IPPROTO_TCP:
case IPPROTO_SCTP:
+ case IPPROTO_DCCP:
if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
u16 *ports = (u16 *)xprth;
static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags);
static void addrconf_dad_timer(unsigned long data);
static void addrconf_dad_completed(struct inet6_ifaddr *ifp);
+static void addrconf_dad_run(struct inet6_dev *idev);
static void addrconf_rs_timer(unsigned long data);
static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa);
static void ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa);
}
#endif
+ if (netif_carrier_ok(dev))
+ ndev->if_flags |= IF_READY;
+
write_lock_bh(&addrconf_lock);
dev->ip6_ptr = ndev;
write_unlock_bh(&addrconf_lock);
if ((idev = ipv6_add_dev(dev)) == NULL)
return NULL;
}
+
if (dev->flags&IFF_UP)
ipv6_mc_up(idev);
return idev;
}
#endif
- for (ifap = &idev->addr_list; (ifa=*ifap) != NULL;
- ifap = &ifa->if_next) {
+ for (ifap = &idev->addr_list; (ifa=*ifap) != NULL;) {
if (ifa == ifp) {
*ifap = ifa->if_next;
__in6_ifa_put(ifp);
if (!(ifp->flags & IFA_F_PERMANENT) || onlink > 0)
break;
deleted = 1;
+ continue;
} else if (ifp->flags & IFA_F_PERMANENT) {
if (ipv6_prefix_equal(&ifa->addr, &ifp->addr,
ifp->prefix_len)) {
}
}
}
+ ifap = &ifa->if_next;
}
write_unlock_bh(&idev->lock);
score.addr_type = __ipv6_addr_type(&ifa->addr);
- /* Rule 0: Candidate Source Address (section 4)
+ /* Rule 0:
+ * - Tentative Address (RFC2462 section 5.4)
+ * - A tentative address is not considered
+ * "assigned to an interface" in the traditional
+ * sense.
+ * - Candidate Source Address (section 4)
* - In any case, anycast addresses, multicast
* addresses, and the unspecified address MUST
* NOT be included in a candidate set.
*/
+ if (ifa->flags & IFA_F_TENTATIVE)
+ continue;
if (unlikely(score.addr_type == IPV6_ADDR_ANY ||
score.addr_type & IPV6_ADDR_MULTICAST)) {
LIMIT_NETDEBUG(KERN_DEBUG
/* Gets referenced address, destroys ifaddr */
-void addrconf_dad_failure(struct inet6_ifaddr *ifp)
+void addrconf_dad_stop(struct inet6_ifaddr *ifp)
{
- if (net_ratelimit())
- printk(KERN_INFO "%s: duplicate address detected!\n", ifp->idev->dev->name);
if (ifp->flags&IFA_F_PERMANENT) {
spin_lock_bh(&ifp->lock);
addrconf_del_timer(ifp);
ipv6_del_addr(ifp);
}
+void addrconf_dad_failure(struct inet6_ifaddr *ifp)
+{
+ if (net_ratelimit())
+ printk(KERN_INFO "%s: duplicate address detected!\n", ifp->idev->dev->name);
+ addrconf_dad_stop(ifp);
+}
/* Join to solicited addr multicast group. */
not good.
*/
if (valid_lft >= 0x7FFFFFFF/HZ)
- rt_expires = 0;
+ rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
else
- rt_expires = jiffies + valid_lft * HZ;
+ rt_expires = valid_lft * HZ;
+
+ /*
+ * We convert this (in jiffies) to clock_t later.
+ * Avoid arithmetic overflow there as well.
+ * Overflow can happen only if HZ < USER_HZ.
+ */
+ if (HZ < USER_HZ && rt_expires > 0x7FFFFFFF / USER_HZ)
+ rt_expires = 0x7FFFFFFF / USER_HZ;
if (pinfo->onlink) {
struct rt6_info *rt;
ip6_del_rt(rt, NULL, NULL, NULL);
rt = NULL;
} else {
- rt->rt6i_expires = rt_expires;
+ rt->rt6i_expires = jiffies + rt_expires;
}
}
} else if (valid_lft) {
addrconf_prefix_route(&pinfo->prefix, pinfo->prefix_len,
- dev, rt_expires, RTF_ADDRCONF|RTF_EXPIRES|RTF_PREFIX_RT);
+ dev, jiffies_to_clock_t(rt_expires), RTF_ADDRCONF|RTF_EXPIRES|RTF_PREFIX_RT);
}
if (rt)
dst_release(&rt->u.dst);
{
struct net_device *dev = (struct net_device *) data;
struct inet6_dev *idev = __in6_dev_get(dev);
+ int run_pending = 0;
switch(event) {
case NETDEV_UP:
+ case NETDEV_CHANGE:
+ if (event == NETDEV_UP) {
+ if (!netif_carrier_ok(dev)) {
+ /* device is not ready yet. */
+ printk(KERN_INFO
+ "ADDRCONF(NETDEV_UP): %s: "
+ "link is not ready\n",
+ dev->name);
+ break;
+ }
+ } else {
+ if (!netif_carrier_ok(dev)) {
+ /* device is still not ready. */
+ break;
+ }
+
+ if (idev) {
+ if (idev->if_flags & IF_READY) {
+ /* device is already configured. */
+ break;
+ }
+ idev->if_flags |= IF_READY;
+ }
+
+ printk(KERN_INFO
+ "ADDRCONF(NETDEV_CHANGE): %s: "
+ "link becomes ready\n",
+ dev->name);
+
+ run_pending = 1;
+ }
+
switch(dev->type) {
case ARPHRD_SIT:
addrconf_sit_config(dev);
break;
};
if (idev) {
+ if (run_pending)
+ addrconf_dad_run(idev);
+
/* If the MTU changed during the interface down, when the
interface up, the changed MTU must be reflected in the
idev as well as routers.
*/
addrconf_ifdown(dev, event != NETDEV_DOWN);
break;
- case NETDEV_CHANGE:
- break;
+
case NETDEV_CHANGENAME:
#ifdef CONFIG_SYSCTL
if (idev) {
/* Step 3: clear flags for stateless addrconf */
if (how != 1)
- idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD);
+ idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
/* Step 4: clear address list */
#ifdef CONFIG_IPV6_PRIVACY
/*
* Duplicate Address Detection
*/
+static void addrconf_dad_kick(struct inet6_ifaddr *ifp)
+{
+ unsigned long rand_num;
+ struct inet6_dev *idev = ifp->idev;
+
+ rand_num = net_random() % (idev->cnf.rtr_solicit_delay ? : 1);
+ ifp->probes = idev->cnf.dad_transmits;
+ addrconf_mod_timer(ifp, AC_DAD, rand_num);
+}
+
static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags)
{
struct inet6_dev *idev = ifp->idev;
struct net_device *dev = idev->dev;
- unsigned long rand_num;
addrconf_join_solict(dev, &ifp->addr);
flags);
net_srandom(ifp->addr.s6_addr32[3]);
- rand_num = net_random() % (idev->cnf.rtr_solicit_delay ? : 1);
read_lock_bh(&idev->lock);
if (ifp->dead)
return;
}
- ifp->probes = idev->cnf.dad_transmits;
- addrconf_mod_timer(ifp, AC_DAD, rand_num);
-
+ if (!(idev->if_flags & IF_READY)) {
+ spin_unlock_bh(&ifp->lock);
+ read_unlock_bh(&idev->lock);
+ /*
+ * If the defice is not ready:
+ * - keep it tentative if it is a permanent address.
+ * - otherwise, kill it.
+ */
+ in6_ifa_hold(ifp);
+ addrconf_dad_stop(ifp);
+ return;
+ }
+ addrconf_dad_kick(ifp);
spin_unlock_bh(&ifp->lock);
out:
read_unlock_bh(&idev->lock);
}
}
+static void addrconf_dad_run(struct inet6_dev *idev) {
+ struct inet6_ifaddr *ifp;
+
+ read_lock_bh(&idev->lock);
+ for (ifp = idev->addr_list; ifp; ifp = ifp->if_next) {
+ spin_lock_bh(&ifp->lock);
+ if (!(ifp->flags & IFA_F_TENTATIVE)) {
+ spin_unlock_bh(&ifp->lock);
+ continue;
+ }
+ spin_unlock_bh(&ifp->lock);
+ addrconf_dad_kick(ifp);
+ }
+ read_unlock_bh(&idev->lock);
+}
+
#ifdef CONFIG_PROC_FS
struct if6_iter_state {
int bucket;
in6_ifa_hold(ifpub);
spin_unlock(&ifp->lock);
read_unlock(&addrconf_hash_lock);
+ spin_lock(&ifpub->lock);
+ ifpub->regen_count = 0;
+ spin_unlock(&ifpub->lock);
ipv6_create_tempaddr(ifpub, ifp);
in6_ifa_put(ifpub);
in6_ifa_put(ifp);
iif = skb->dev->ifindex;
/*
- * Must not send if we know that source is Anycast also.
- * for now we don't know that.
+ * Must not send error if the source does not uniquely
+ * identify a single node (RFC2463 Section 2.4).
+ * We check unspecified / multicast addresses here,
+ * and anycast addresses will be checked later.
*/
if ((addr_type == IPV6_ADDR_ANY) || (addr_type & IPV6_ADDR_MULTICAST)) {
LIMIT_NETDEBUG(KERN_DEBUG "icmpv6_send: addr_any/mcast source\n");
err = ip6_dst_lookup(sk, &dst, &fl);
if (err)
goto out;
+
+ /*
+ * We won't send icmp if the destination is known
+ * anycast.
+ */
+ if (((struct rt6_info *)dst)->rt6i_flags & RTF_ANYCAST) {
+ LIMIT_NETDEBUG(KERN_DEBUG "icmpv6_send: acast source\n");
+ goto out_dst_release;
+ }
+
if ((err = xfrm_lookup(&dst, &fl, sk, 0)) < 0)
goto out;
#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
#define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value)
-#define IPV6_MLD_MAX_MSF 10
+#define IPV6_MLD_MAX_MSF 64
int sysctl_mld_max_msf = IPV6_MLD_MAX_MSF;
mc_lst->ifindex = dev->ifindex;
mc_lst->sfmode = MCAST_EXCLUDE;
+ mc_lst->sflock = RW_LOCK_UNLOCKED;
mc_lst->sflist = NULL;
/*
struct ip6_sf_socklist *psl;
int i, j, rv;
int leavegroup = 0;
+ int pmclocked = 0;
int err;
if (pgsr->gsr_group.ss_family != AF_INET6 ||
pmc->sfmode = omode;
}
+ write_lock_bh(&pmc->sflock);
+ pmclocked = 1;
+
psl = pmc->sflist;
if (!add) {
if (!psl)
/* update the interface list */
ip6_mc_add_src(idev, group, omode, 1, source, 1);
done:
+ if (pmclocked)
+ write_unlock_bh(&pmc->sflock);
read_unlock_bh(&ipv6_sk_mc_lock);
read_unlock_bh(&idev->lock);
in6_dev_put(idev);
dev = idev->dev;
err = 0;
+ read_lock_bh(&ipv6_sk_mc_lock);
+
if (gsf->gf_fmode == MCAST_INCLUDE && gsf->gf_numsrc == 0) {
leavegroup = 1;
goto done;
newpsl = NULL;
(void) ip6_mc_add_src(idev, group, gsf->gf_fmode, 0, NULL, 0);
}
+
+ write_lock_bh(&pmc->sflock);
psl = pmc->sflist;
if (psl) {
(void) ip6_mc_del_src(idev, group, pmc->sfmode,
(void) ip6_mc_del_src(idev, group, pmc->sfmode, 0, NULL, 0);
pmc->sflist = newpsl;
pmc->sfmode = gsf->gf_fmode;
+ write_unlock_bh(&pmc->sflock);
err = 0;
done:
+ read_unlock_bh(&ipv6_sk_mc_lock);
read_unlock_bh(&idev->lock);
in6_dev_put(idev);
dev_put(dev);
dev = idev->dev;
err = -EADDRNOTAVAIL;
+ /*
+ * changes to the ipv6_mc_list require the socket lock and
+ * a read lock on ip6_sk_mc_lock. We have the socket lock,
+ * so reading the list is safe.
+ */
for (pmc=inet6->ipv6_mc_list; pmc; pmc=pmc->next) {
if (pmc->ifindex != gsf->gf_interface)
copy_to_user(optval, gsf, GROUP_FILTER_SIZE(0))) {
return -EFAULT;
}
+ /* changes to psl require the socket lock, a read lock on
+ * on ipv6_sk_mc_lock and a write lock on pmc->sflock. We
+ * have the socket lock, so reading here is safe.
+ */
for (i=0; i<copycount; i++) {
struct sockaddr_in6 *psin6;
struct sockaddr_storage ss;
read_unlock(&ipv6_sk_mc_lock);
return 1;
}
+ read_lock(&mc->sflock);
psl = mc->sflist;
if (!psl) {
rv = mc->sfmode == MCAST_EXCLUDE;
if (mc->sfmode == MCAST_EXCLUDE && i < psl->sl_count)
rv = 0;
}
+ read_unlock(&mc->sflock);
read_unlock(&ipv6_sk_mc_lock);
return rv;
ma->mca_flags |= MAF_TIMER_RUNNING;
}
-static void mld_marksources(struct ifmcaddr6 *pmc, int nsrcs,
+/* mark EXCLUDE-mode sources */
+static int mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs,
struct in6_addr *srcs)
{
struct ip6_sf_list *psf;
for (psf=pmc->mca_sources; psf; psf=psf->sf_next) {
if (scount == nsrcs)
break;
- for (i=0; i<nsrcs; i++)
+ for (i=0; i<nsrcs; i++) {
+ /* skip inactive filters */
+ if (pmc->mca_sfcount[MCAST_INCLUDE] ||
+ pmc->mca_sfcount[MCAST_EXCLUDE] !=
+ psf->sf_count[MCAST_EXCLUDE])
+ continue;
+ if (ipv6_addr_equal(&srcs[i], &psf->sf_addr)) {
+ scount++;
+ break;
+ }
+ }
+ }
+ pmc->mca_flags &= ~MAF_GSQUERY;
+ if (scount == nsrcs) /* all sources excluded */
+ return 0;
+ return 1;
+}
+
+static int mld_marksources(struct ifmcaddr6 *pmc, int nsrcs,
+ struct in6_addr *srcs)
+{
+ struct ip6_sf_list *psf;
+ int i, scount;
+
+ if (pmc->mca_sfmode == MCAST_EXCLUDE)
+ return mld_xmarksources(pmc, nsrcs, srcs);
+
+ /* mark INCLUDE-mode sources */
+
+ scount = 0;
+ for (psf=pmc->mca_sources; psf; psf=psf->sf_next) {
+ if (scount == nsrcs)
+ break;
+ for (i=0; i<nsrcs; i++) {
if (ipv6_addr_equal(&srcs[i], &psf->sf_addr)) {
psf->sf_gsresp = 1;
scount++;
break;
}
+ }
+ }
+ if (!scount) {
+ pmc->mca_flags &= ~MAF_GSQUERY;
+ return 0;
}
+ pmc->mca_flags |= MAF_GSQUERY;
+ return 1;
}
int igmp6_event_query(struct sk_buff *skb)
/* mark sources to include, if group & source-specific */
if (mlh2->nsrcs != 0) {
if (!pskb_may_pull(skb, srcs_offset +
- mlh2->nsrcs * sizeof(struct in6_addr))) {
+ ntohs(mlh2->nsrcs) * sizeof(struct in6_addr))) {
in6_dev_put(idev);
return -EINVAL;
}
else
ma->mca_flags &= ~MAF_GSQUERY;
}
- if (ma->mca_flags & MAF_GSQUERY)
- mld_marksources(ma, ntohs(mlh2->nsrcs),
- mlh2->srcs);
- igmp6_group_queried(ma, max_delay);
+ if (!(ma->mca_flags & MAF_GSQUERY) ||
+ mld_marksources(ma, ntohs(mlh2->nsrcs), mlh2->srcs))
+ igmp6_group_queried(ma, max_delay);
spin_unlock_bh(&ma->mca_lock);
if (group_type != IPV6_ADDR_ANY)
break;
case MLD2_MODE_IS_EXCLUDE:
if (gdeleted || sdeleted)
return 0;
- return !((pmc->mca_flags & MAF_GSQUERY) && !psf->sf_gsresp);
+ if (!((pmc->mca_flags & MAF_GSQUERY) && !psf->sf_gsresp)) {
+ if (pmc->mca_sfmode == MCAST_INCLUDE)
+ return 1;
+ /* don't include if this source is excluded
+ * in all filters
+ */
+ if (psf->sf_count[MCAST_INCLUDE])
+ return 0;
+ return pmc->mca_sfcount[MCAST_EXCLUDE] ==
+ psf->sf_count[MCAST_EXCLUDE];
+ }
+ return 0;
case MLD2_CHANGE_TO_INCLUDE:
if (gdeleted || sdeleted)
return 0;
struct mld2_report *pmr;
struct mld2_grec *pgr = NULL;
struct ip6_sf_list *psf, *psf_next, *psf_prev, **psf_list;
- int scount, first, isquery, truncate;
+ int scount, stotal, first, isquery, truncate;
if (pmc->mca_flags & MAF_NOREPORT)
return skb;
truncate = type == MLD2_MODE_IS_EXCLUDE ||
type == MLD2_CHANGE_TO_EXCLUDE;
+ stotal = scount = 0;
+
psf_list = sdeleted ? &pmc->mca_tomb : &pmc->mca_sources;
- if (!*psf_list) {
- if (type == MLD2_ALLOW_NEW_SOURCES ||
- type == MLD2_BLOCK_OLD_SOURCES)
- return skb;
- if (pmc->mca_crcount || isquery) {
- /* make sure we have room for group header and at
- * least one source.
- */
- if (skb && AVAILABLE(skb) < sizeof(struct mld2_grec)+
- sizeof(struct in6_addr)) {
- mld_sendpack(skb);
- skb = NULL; /* add_grhead will get a new one */
- }
- skb = add_grhead(skb, pmc, type, &pgr);
- }
- return skb;
- }
+ if (!*psf_list)
+ goto empty_source;
+
pmr = skb ? (struct mld2_report *)skb->h.raw : NULL;
/* EX and TO_EX get a fresh packet, if needed */
}
}
first = 1;
- scount = 0;
psf_prev = NULL;
for (psf=*psf_list; psf; psf=psf_next) {
struct in6_addr *psrc;
}
psrc = (struct in6_addr *)skb_put(skb, sizeof(*psrc));
*psrc = psf->sf_addr;
- scount++;
+ scount++; stotal++;
if ((type == MLD2_ALLOW_NEW_SOURCES ||
type == MLD2_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
psf->sf_crcount--;
}
psf_prev = psf;
}
+
+empty_source:
+ if (!stotal) {
+ if (type == MLD2_ALLOW_NEW_SOURCES ||
+ type == MLD2_BLOCK_OLD_SOURCES)
+ return skb;
+ if (pmc->mca_crcount || isquery) {
+ /* make sure we have room for group header */
+ if (skb && AVAILABLE(skb) < sizeof(struct mld2_grec)) {
+ mld_sendpack(skb);
+ skb = NULL; /* add_grhead will get a new one */
+ }
+ skb = add_grhead(skb, pmc, type, &pgr);
+ }
+ }
if (pgr)
pgr->grec_nsrcs = htons(scount);
skb = add_grec(skb, pmc, dtype, 1, 1);
}
if (pmc->mca_crcount) {
- pmc->mca_crcount--;
if (pmc->mca_sfmode == MCAST_EXCLUDE) {
type = MLD2_CHANGE_TO_INCLUDE;
skb = add_grec(skb, pmc, type, 1, 0);
}
+ pmc->mca_crcount--;
if (pmc->mca_crcount == 0) {
mld_clear_zeros(&pmc->mca_tomb);
mld_clear_zeros(&pmc->mca_sources);
/* filter mode changes */
if (pmc->mca_crcount) {
- pmc->mca_crcount--;
if (pmc->mca_sfmode == MCAST_EXCLUDE)
type = MLD2_CHANGE_TO_EXCLUDE;
else
type = MLD2_CHANGE_TO_INCLUDE;
skb = add_grec(skb, pmc, type, 0, 0);
+ pmc->mca_crcount--;
}
spin_unlock_bh(&pmc->mca_lock);
}
{
int err;
+ /* callers have the socket lock and a write lock on ipv6_sk_mc_lock,
+ * so no other readers or writers of iml or its sflist
+ */
if (iml->sflist == 0) {
/* any-source empty exclude case */
return ip6_mc_del_src(idev, &iml->addr, iml->sfmode, 0, NULL, 0);
config IP6_NF_TARGET_NFQUEUE
tristate "NFQUEUE Target Support"
- depends on IP_NF_IPTABLES
+ depends on IP6_NF_IPTABLES
help
This Target replaced the old obsolete QUEUE target.
rt = ip6_rt_copy(ort);
if (rt) {
- ipv6_addr_copy(&rt->rt6i_dst.addr, daddr);
-
- if (!(rt->rt6i_flags&RTF_GATEWAY))
+ if (!(rt->rt6i_flags&RTF_GATEWAY)) {
+ if (rt->rt6i_dst.plen != 128 &&
+ ipv6_addr_equal(&rt->rt6i_dst.addr, daddr))
+ rt->rt6i_flags |= RTF_ANYCAST;
ipv6_addr_copy(&rt->rt6i_gateway, daddr);
+ }
+ ipv6_addr_copy(&rt->rt6i_dst.addr, daddr);
rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
rt->u.dst.flags |= DST_HOST;
}
rt->u.dst.obsolete = -1;
- rt->rt6i_expires = clock_t_to_jiffies(rtmsg->rtmsg_info);
+ rt->rt6i_expires = jiffies + clock_t_to_jiffies(rtmsg->rtmsg_info);
if (nlh && (r = NLMSG_DATA(nlh))) {
rt->rt6i_protocol = r->rtm_protocol;
} else {
rt->u.dst.obsolete = -1;
rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP;
- if (!anycast)
+ if (anycast)
+ rt->rt6i_flags |= RTF_ANYCAST;
+ else
rt->rt6i_flags |= RTF_LOCAL;
rt->rt6i_nexthop = ndisc_get_neigh(rt->rt6i_dev, &rt->rt6i_gateway);
if (rt->rt6i_nexthop == NULL) {
case IPPROTO_UDP:
case IPPROTO_TCP:
case IPPROTO_SCTP:
+ case IPPROTO_DCCP:
if (pskb_may_pull(skb, skb->nh.raw + offset + 4 - skb->data)) {
u16 *ports = (u16 *)exthdr;
break;
case NR_RESET:
- if (sysctl_netrom_reset_circuit);
+ if (sysctl_netrom_reset_circuit)
nr_disconnect(sk, ECONNRESET);
break;
break;
case NR_RESET:
- if (sysctl_netrom_reset_circuit);
+ if (sysctl_netrom_reset_circuit)
nr_disconnect(sk, ECONNRESET);
break;
break;
case NR_RESET:
- if (sysctl_netrom_reset_circuit);
+ if (sysctl_netrom_reset_circuit)
nr_disconnect(sk, ECONNRESET);
break;
sizeof(struct sk_buff) +
sizeof(struct sctp_chunk);
- sk->sk_wmem_queued += SCTP_DATA_SNDSIZE(chunk) +
- sizeof(struct sk_buff) +
- sizeof(struct sctp_chunk);
-
atomic_add(sizeof(struct sctp_chunk), &sk->sk_wmem_alloc);
}
* tcp_poll(). Note that, based on these implementations, we don't
* lock the socket in this function, even though it seems that,
* ideally, locking or some other mechanisms can be used to ensure
- * the integrity of the counters (sndbuf and wmem_queued) used
+ * the integrity of the counters (sndbuf and wmem_alloc) used
* in this place. We assume that we don't need locks either until proven
* otherwise.
*
sizeof(struct sk_buff) +
sizeof(struct sctp_chunk);
- sk->sk_wmem_queued -= SCTP_DATA_SNDSIZE(chunk) +
- sizeof(struct sk_buff) +
- sizeof(struct sctp_chunk);
-
atomic_sub(sizeof(struct sctp_chunk), &sk->sk_wmem_alloc);
sock_wfree(skb);
/* Is there any sndbuf space available on the socket?
*
- * Note that wmem_queued is the sum of the send buffers on all of the
+ * Note that sk_wmem_alloc is the sum of the send buffers on all of the
* associations on the same socket. For a UDP-style socket with
* multiple associations, it is possible for it to be "unwriteable"
* prematurely. I assume that this is acceptable because
{
int amt = 0;
- amt = sk->sk_sndbuf - sk->sk_wmem_queued;
+ amt = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
if (amt < 0)
amt = 0;
return amt;
Code Review / linux-2.6.git / commitdiff