echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
+ echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
- __FUNCTION__, dma_addr, size);
+ __func__, dma_addr, size);
return (dev->bus == &pci_bus_type) &&
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
*/
int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
- dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
int
pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
- dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 20:04:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar 3 03:39:48 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System Type
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
#
# TI OMAP Implementations
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
#
# CPU Frequency scaling
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
#
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TPS65010=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
#
# Multimedia devices
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 21:12:45 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar 3 03:35:17 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System Type
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
#
# TI OMAP Implementations
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
#
# OMAP Board Type
#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
+CONFIG_MACH_OMAP_INNOVATOR=y
+CONFIG_MACH_OMAP_H2=y
+CONFIG_MACH_OMAP_H3=y
CONFIG_MACH_OMAP_OSK=y
# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
+CONFIG_MACH_NOKIA770=y
+CONFIG_MACH_OMAP_GENERIC=y
#
# OMAP CPU Speed
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
#
# CPU Frequency scaling
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TPS65010=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
#
# Multimedia devices
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
*
*/
+#define ATAG_CORE 0x54410001
+#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+
.type __switch_data, %object
__switch_data:
.long __mmap_switched
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
-#define ATAG_CORE 0x54410001
-#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
-
/*
* swapper_pg_dir is the virtual address of the initial page table.
return 0;
}
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+
static struct undef_hook kprobes_break_hook = {
.instr_mask = 0xffffffff,
.instr_val = KPROBE_BREAKPOINT_INSTRUCTION,
static void at91_lcdc_power_control(int on)
{
- if (on)
- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PA30, on);
}
/* Driver datas */
/*--------------------------------------------------------------------------*/
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
/*
* Called from the processor-specific init to enable GPIO interrupt support.
*/
__raw_writel(~0, this->regbase + PIO_IDR);
for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+ lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
+
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
h720x_gpio_handler(unsigned int mask, unsigned int irq,
struct irq_desc *desc)
{
- IRQDBG("%s irq: %d\n",__FUNCTION__,irq);
+ IRQDBG("%s irq: %d\n", __func__, irq);
desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
irq = IRQ_CHAINED_GPIOA(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+ IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
h720x_gpio_handler(mask, irq, desc);
}
unsigned int mask, irq;
mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
irq = IRQ_CHAINED_GPIOB(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+ IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
h720x_gpio_handler(mask, irq, desc);
}
mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
irq = IRQ_CHAINED_GPIOC(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+ IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
h720x_gpio_handler(mask, irq, desc);
}
mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
irq = IRQ_CHAINED_GPIOD(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+ IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
h720x_gpio_handler(mask, irq, desc);
}
mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
irq = IRQ_CHAINED_GPIOE(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+ IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
h720x_gpio_handler(mask, irq, desc);
}
#endif
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return 0;
}
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return -ENODEV;
}
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return;
}
if (dma_ch >= IMX_DMA_CHANNELS) {
printk(KERN_CRIT "%s: called for non-existed channel %d\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return -EINVAL;
}
if (!imxdma->name) {
printk(KERN_CRIT
"%s: trying to free channel %d which is already freed\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return;
}
}
}
- printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__);
+ printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
return -ENODEV;
}
static void
imx_gpio_ack_irq(unsigned int irq)
{
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, irq);
ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
}
static void
imx_gpio_mask_irq(unsigned int irq)
{
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, irq);
IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
}
static void
imx_gpio_unmask_irq(unsigned int irq)
{
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, irq);
IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
}
static void __init iq81340mc_timer_init(void)
{
unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
- printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+ printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
iop_init_time(bus_freq);
}
static void __init iq81340sc_timer_init(void)
{
unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
- printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+ printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
iop_init_time(bus_freq);
}
, 0, iop13xx_atux_mem_size, MT_DEVICE);
if (!iop13xx_atux_mem_base) {
printk("%s: atux allocation "
- "failed\n", __FUNCTION__);
+ "failed\n", __func__);
BUG();
}
} else
iop13xx_atux_mem_size = 0;
PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
- __FUNCTION__, atu, iop13xx_atux_mem_size,
+ __func__, atu, iop13xx_atux_mem_size,
iop13xx_atux_mem_base);
break;
case 1:
, 0, iop13xx_atue_mem_size, MT_DEVICE);
if (!iop13xx_atue_mem_base) {
printk("%s: atue allocation "
- "failed\n", __FUNCTION__);
+ "failed\n", __func__);
BUG();
}
} else
iop13xx_atue_mem_size = 0;
PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
- __FUNCTION__, atu, iop13xx_atue_mem_size,
+ __func__, atu, iop13xx_atue_mem_size,
iop13xx_atue_mem_base);
break;
}
if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
iop13xx_devices[plat_idx++] = &iq8134x_flash;
else
- printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
#endif
platform_add_devices(iop13xx_devices, plat_idx);
if (isr & PCI_ISR_PFE) {
/* make sure the Master Abort bit is reset */
*PCI_ISR = PCI_ISR_PFE;
- pr_debug("%s failed\n", __FUNCTION__);
+ pr_debug("%s failed\n", __func__);
return 1;
}
else
rc = gtwx5715_irqmap[slot][pin-1];
- printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc);
+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc);
return(rc);
}
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
}
static void
val = readl(NETX_DPMAS_INT_EN);
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
}
static void
val = readl(NETX_DPMAS_INT_EN);
val |= (1 << 24) << irq;
writel(val, NETX_DPMAS_INT_EN);
- DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+ DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
}
static struct irq_chip netx_hif_chip = {
static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock);
/* only access gpiores with atomic ops */
-static DECLARE_BITMAP(gpiores, GPIO_MAX);
+static DECLARE_BITMAP(gpiores, GPIO_MAX + 1);
static inline int ns9xxx_valid_gpio(unsigned gpio)
{
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
+ I2C_BOARD_INFO("tps65010", 0x48),
+ .type = "tps65010",
+ .irq = OMAP_GPIO_IRQ(58),
+ }, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.type = "isp1301_omap",
.irq = OMAP_GPIO_IRQ(2),
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <asm/setup.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
+#define H3_TS_GPIO 48
+
static int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
.id = -1,
};
+static struct spi_board_info h3_spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "tsc2101",
+ .bus_num = 2,
+ .chip_select = 0,
+ .irq = OMAP_GPIO_IRQ(H3_TS_GPIO),
+ .max_speed_hz = 16000000,
+ /* .platform_data = &tsc_platform_data, */
+ },
+};
+
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
{ OMAP_TAG_LCD, &h3_lcd_config },
};
+static struct i2c_board_info __initdata h3_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps65010", 0x48),
+ .type = "tps65013",
+ /* .irq = OMAP_GPIO_IRQ(??), */
+ },
+};
+
static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
{
.name = "mmc_slot",
#endif
#ifdef CONFIG_OMAP_32K_TIMER
- error = sysfs_create_file(power_kobj, &sleep_while_idle_attr);
+ error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
if (error)
printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
#endif
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
+ {
+ .virtual = L4_24XX_VIRT,
+ .pfn = __phys_to_pfn(L4_24XX_PHYS),
+ .length = L4_24XX_SIZE,
+ .type = MT_DEVICE
+ },
#ifdef CONFIG_ARCH_OMAP2430
{
.virtual = L4_WK_243X_VIRT,
#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
-#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4))
-#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4))
-#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4))
+#define PCIE_WIN_CTRL(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x1820 + ((n) << 4)) : \
+ ORION_PCIE_REG(0x1880))
+#define PCIE_WIN_BASE(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x1824 + ((n) << 4)) : \
+ ORION_PCIE_REG(0x1884))
+#define PCIE_WIN_REMAP(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x182c + ((n) << 4)) : \
+ ORION_PCIE_REG(0x188c))
#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
#define PCIE_MAX_BARS 3
-#define PCIE_MAX_WINS 5
+#define PCIE_MAX_WINS 6
/*
* Use PCIE BAR '1' for all DDR banks
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <asm/page.h>
+#include <asm/setup.h>
#include <asm/timex.h>
+#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/hardware.h>
#include "common.h"
static struct resource orion_eth_shared_resources[] = {
{
- .start = ORION_ETH_PHYS_BASE,
- .end = ORION_ETH_PHYS_BASE + 0xffff,
+ .start = ORION_ETH_PHYS_BASE + 0x2000,
+ .end = ORION_ETH_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
},
};
platform_device_register(&orion_ehci1);
platform_device_register(&orion_i2c);
}
+
+/*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t,
+ char **from, struct meminfo *meminfo)
+{
+ for (; t->hdr.size; t = tag_next(t))
+ if (t->hdr.tag == ATAG_MEM &&
+ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+ t->u.mem.start & ~PAGE_MASK)) {
+ printk(KERN_WARNING
+ "Clearing invalid memory bank %dKB@0x%08x\n",
+ t->u.mem.size / 1024, t->u.mem.start);
+ t->hdr.tag = 0;
+ }
+}
void __init orion_sata_init(struct mv_sata_platform_data *sata_data);
+struct machine_desc;
+struct meminfo;
+struct tag;
+extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *,
+ char **, struct meminfo *);
+
#endif /* __ARCH_ORION_COMMON_H__ */
.map_io = orion_map_io,
.init_irq = orion_init_irq,
.timer = &orion_timer,
+ .fixup = tag_fixup_mem32,
MACHINE_END
unsigned long flags;
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
- pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
int mask;
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
- pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
unsigned long flags;
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
- pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
if (gpio_label[pin]) {
pr_debug("%s: GPIO %d already used as %s\n",
- __FUNCTION__, pin, gpio_label[pin]);
+ __func__, pin, gpio_label[pin]);
ret = -EBUSY;
} else
gpio_label[pin] = label ? label : "?";
void gpio_free(unsigned pin)
{
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
- pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
}
if (!gpio_label[pin])
- pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
+ pr_warning("%s: GPIO %d already freed\n", __func__, pin);
else
gpio_label[pin] = NULL;
}
.map_io = orion_map_io,
.init_irq = orion_init_irq,
.timer = &orion_timer,
+ .fixup = tag_fixup_mem32,
MACHINE_END
.map_io = orion_map_io,
.init_irq = orion_init_irq,
.timer = &orion_timer,
+ .fixup = tag_fixup_mem32,
MACHINE_END
(*clkp)->set_parent((*clkp), (*clkp)->parent);
}
pr_debug("%s: clock %s, rate %ld\n",
- __FUNCTION__, (*clkp)->name, (*clkp)->rate);
+ __func__, (*clkp)->name, (*clkp)->rate);
}
local_clk_use(&ck_pll4);
if (!dma_channels[ch].name) {
printk(KERN_CRIT
"%s: trying to free channel %d which is already freed\n",
- __FUNCTION__, ch);
+ __func__, ch);
return;
}
{
int irq;
- dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
+ dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
irq = it8152_pci_map_irq(dev, slot, pin);
if (irq)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
- printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+ printk(KERN_DEBUG "%s: on\n", __func__);
GPCR(105) = GPIO_bit(105);
} else {
GPSR(105) = GPIO_bit(105);
- printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+ printk(KERN_DEBUG "%s: off\n", __func__);
}
}
if (!dma_channels[dma_ch].name) {
printk (KERN_CRIT
"%s: trying to free channel %d which is already freed\n",
- __FUNCTION__, dma_ch);
+ __func__, dma_ch);
return;
}
"MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
- __FUNCTION__, err);
+ __func__, err);
return err;
}
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
- printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+ printk(KERN_DEBUG "%s: on\n", __func__);
MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
} else {
- printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+ printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
}
ConXS_BCR = trizeps_conxs_bcr;
}
- pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+ pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
}
/* backlight power switching for LCD panel */
} else {
trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
}
- pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+ pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
ConXS_BCR = trizeps_conxs_bcr;
}
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __FUNCTION__);
+ pr_debug("%s: on\n", __func__);
/* FIXME fill in values here */
} else {
- pr_debug("%s: off\n", __FUNCTION__);
+ pr_debug("%s: off\n", __func__);
/* FIXME fill in values here */
}
}
if (ret < 0)
printk(KERN_ERR
"%s: SA-1111 initialization failed (%d)\n",
- __FUNCTION__, ret);
+ __func__, ret);
/* maybe turn on 5v0 from the start */
/* detect on->off and off->on transitions */
if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
/* was off, now on */
- printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__);
+ printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
GPSR = BADGE4_GPIO_PCMEN5V;
} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
/* was on, now off */
- printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__);
+ printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
GPCR = BADGE4_GPIO_PCMEN5V;
}
if (settings->speed == 0) {
panic("%s: couldn't find dram setting for speed %d\n",
- __FUNCTION__, new_speed);
+ __func__, new_speed);
}
/* No risk, no fun: run with interrupts on! */
if (err) {
printk(KERN_ERR
"%s: unable to request IRQ %d for %s\n",
- __FUNCTION__, IRQ_DMA0 + i, device_id);
+ __func__, IRQ_DMA0 + i, device_id);
dma->device = 0;
return err;
}
if (regs == (dma_regs_t *)&DDAR(i))
break;
if (i >= SA1100_DMA_CHANNELS) {
- printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+ printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
return;
}
if (!dma_chan[i].device) {
- printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
return;
}
if (regs == (dma_regs_t *)&DDAR(i))
break;
if (i >= SA1100_DMA_CHANNELS) {
- printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+ printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
return;
}
case IPAQ_EGPIO_CODEC_NRESET:
case IPAQ_EGPIO_AUDIO_ON:
case IPAQ_EGPIO_QMUTE:
- printk("%s: error - should not be called\n", __FUNCTION__);
+ printk("%s: error - should not be called\n", __func__);
break;
case IPAQ_EGPIO_OPT_NVRAM_ON:
SET_ASIC2(GPIO2_OPT_ON_NVRAM);
static u16 asic2_data;
int result = 0;
- printk("%s %d\n", __FUNCTION__, req);
+ printk("%s %d\n", __func__, req);
switch (req) {
case PM_RESUME:
asic2_data = H3800_ASIC2_GPIOPIOD;
break;
default:
- printk("%s: unrecognized PM callback\n", __FUNCTION__);
+ printk("%s: unrecognized PM callback\n", __func__);
break;
}
return result;
{
int i;
- if (0) printk("%s: interrupt received\n", __FUNCTION__);
+ if (0) printk("%s: interrupt received\n", __func__);
desc->chip->ack(irq);
/* KPIO */
irq = H3800_ASIC2_KPIINTFLAG;
- if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
+ if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
if (irq & kpio_irq_mask[j])
handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
/* GPIO2 */
irq = H3800_ASIC2_GPIINTFLAG;
- if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
+ if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
if (irq & gpio_irq_mask[j])
handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
}
if (i >= MAX_ASIC_ISR_LOOPS)
- printk("%s: interrupt processing overrun\n", __FUNCTION__);
+ printk("%s: interrupt processing overrun\n", __func__);
/* For level-based interrupts */
desc->chip->unmask(irq);
default:
printk(KERN_DEBUG "\"%s\" malformed at "
"character: \'%c\'",
- __FUNCTION__,
+ __func__,
*str);
*(str + 1) = '\0';
}
#define MPU_CLK "virt_prcm_set"
#endif
+static struct clk *mpu_clk;
+
/* TODO: Add support for SDRAM timing changes */
int omap_verify_speed(struct cpufreq_policy *policy)
{
- struct clk * mpu_clk;
-
if (policy->cpu)
return -EINVAL;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
- mpu_clk = clk_get(NULL, MPU_CLK);
- if (IS_ERR(mpu_clk))
- return PTR_ERR(mpu_clk);
+
policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
- clk_put(mpu_clk);
-
return 0;
}
unsigned int omap_getspeed(unsigned int cpu)
{
- struct clk * mpu_clk;
unsigned long rate;
if (cpu)
return 0;
- mpu_clk = clk_get(NULL, MPU_CLK);
- if (IS_ERR(mpu_clk))
- return 0;
rate = clk_get_rate(mpu_clk) / 1000;
- clk_put(mpu_clk);
-
return rate;
}
unsigned int target_freq,
unsigned int relation)
{
- struct clk * mpu_clk;
struct cpufreq_freqs freqs;
int ret = 0;
- mpu_clk = clk_get(NULL, MPU_CLK);
- if (IS_ERR(mpu_clk))
- return PTR_ERR(mpu_clk);
-
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
ret = clk_set_rate(mpu_clk, target_freq * 1000);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- clk_put(mpu_clk);
return ret;
}
static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
- struct clk * mpu_clk;
-
mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
- clk_put(mpu_clk);
return 0;
}
+static int omap_cpu_exit(struct cpufreq_policy *policy)
+{
+ clk_put(mpu_clk);
+ return 0;
+}
+
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = omap_verify_speed,
.target = omap_target,
.get = omap_getspeed,
.init = omap_cpu_init,
+ .exit = omap_cpu_exit,
.name = "omap",
};
static inline void omap_init_dsp(void) { }
#endif /* CONFIG_OMAP_DSP */
-/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP2_I2C_BASE1 0x48070000
-#define OMAP_I2C_SIZE 0x3f
-#define OMAP1_I2C_INT INT_I2C
-#define OMAP2_I2C_INT1 56
-
-static struct resource i2c_resources1[] = {
- {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device1 = {
- .name = "i2c_omap",
- .id = 1,
- .num_resources = ARRAY_SIZE(i2c_resources1),
- .resource = i2c_resources1,
-};
-
-/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
-static void omap_init_i2c(void)
-{
- if (cpu_is_omap24xx()) {
- i2c_resources1[0].start = OMAP2_I2C_BASE1;
- i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
- i2c_resources1[1].start = OMAP2_I2C_INT1;
- } else {
- i2c_resources1[0].start = OMAP1_I2C_BASE;
- i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
- i2c_resources1[1].start = OMAP1_I2C_INT;
- }
-
- /* FIXME define and use a boot tag, in case of boards that
- * either don't wire up I2C, or chips that mux it differently...
- * it can include clocking and address info, maybe more.
- */
- if (cpu_is_omap24xx()) {
- omap_cfg_reg(M19_24XX_I2C1_SCL);
- omap_cfg_reg(L15_24XX_I2C1_SDA);
- } else {
- omap_cfg_reg(I2C_SCL);
- omap_cfg_reg(I2C_SDA);
- }
-
- (void) platform_device_register(&omap_i2c_device1);
-}
-
-#else
-static inline void omap_init_i2c(void) {}
-#endif
-
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
* in alphabetical order so they're easier to sort through.
*/
omap_init_dsp();
- omap_init_i2c();
omap_init_kp();
omap_init_mmc();
omap_init_uwire();
static inline void omap_enable_channel_irq(int lch);
#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
- __FUNCTION__);
+ __func__);
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
u32 reg;
if (!cpu_class_is_omap2()) {
- printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__);
+ printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
status = OMAP_DMA_CSR_REG(ch);
}
- if (likely(dma_chan[ch].callback != NULL)) {
- if (dma_chan[ch].chain_id != -1)
- dma_chan[ch].callback(dma_chan[ch].chain_id, status,
- dma_chan[ch].data);
- else
- dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
- }
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, status, dma_chan[ch].data);
OMAP_DMA_CSR_REG(ch) = status;
if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
spin_unlock_irqrestore(&dm_timer_lock, flags);
printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
- __FILE__, __LINE__, __FUNCTION__, id);
+ __FILE__, __LINE__, __func__, id);
dump_stack();
return NULL;
}
void omap_set_gpio_direction(int gpio, int is_input)
{
struct gpio_bank *bank;
+ unsigned long flags;
if (check_gpio(gpio) < 0)
return;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
void omap_set_gpio_dataout(int gpio, int enable)
{
struct gpio_bank *bank;
+ unsigned long flags;
if (check_gpio(gpio) < 0)
return;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
int omap_get_gpio_datain(int gpio)
struct gpio_bank *bank;
unsigned gpio;
int retval;
+ unsigned long flags;
if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
return -EINVAL;
bank = get_irq_chip_data(irq);
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
if (retval == 0) {
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
irq_desc[irq].status |= type;
}
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return retval;
}
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
+ unsigned long flags;
+
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_MPUIO:
case METHOD_GPIO_1610:
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
if (enable) {
bank->suspend_wakeup |= (1 << gpio);
enable_irq_wake(bank->irq);
disable_irq_wake(bank->irq);
bank->suspend_wakeup &= ~(1 << gpio);
}
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
(bank - gpio_bank) * 32 + gpio);
return -EINVAL;
}
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
if (enable) {
bank->suspend_wakeup |= (1 << gpio);
enable_irq_wake(bank->irq);
disable_irq_wake(bank->irq);
bank->suspend_wakeup &= ~(1 << gpio);
}
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
default:
int omap_request_gpio(int gpio)
{
struct gpio_bank *bank;
+ unsigned long flags;
if (check_gpio(gpio) < 0)
return -EINVAL;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return -1;
}
bank->reserved_map |= (1 << get_gpio_index(gpio));
__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
}
#endif
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
void omap_free_gpio(int gpio)
{
struct gpio_bank *bank;
+ unsigned long flags;
if (check_gpio(gpio) < 0)
return;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return;
}
#ifdef CONFIG_ARCH_OMAP16XX
#endif
bank->reserved_map &= ~(1 << get_gpio_index(gpio));
_reset_gpio(bank, gpio);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
/*
{
struct gpio_bank *bank = platform_get_drvdata(pdev);
void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+ unsigned long flags;
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
bank->saved_wakeup = __raw_readl(mask_reg);
__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
{
struct gpio_bank *bank = platform_get_drvdata(pdev);
void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+ unsigned long flags;
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
__raw_writel(bank->saved_wakeup, mask_reg);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
static int __init _omap_gpio_init(void)
{
int i;
#endif
for (j = bank->virtual_irq_start;
j < bank->virtual_irq_start + gpio_count; j++) {
+ lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
set_irq_chip_data(j, bank);
if (bank_is_mpuio(bank))
set_irq_chip(j, &mpuio_irq_chip);
void __iomem *wake_status;
void __iomem *wake_clear;
void __iomem *wake_set;
+ unsigned long flags;
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
continue;
}
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
bank->saved_wakeup = __raw_readl(wake_status);
__raw_writel(0xffffffff, wake_clear);
__raw_writel(bank->suspend_wakeup, wake_set);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
return 0;
struct gpio_bank *bank = &gpio_bank[i];
void __iomem *wake_clear;
void __iomem *wake_set;
+ unsigned long flags;
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
continue;
}
- spin_lock(&bank->lock);
+ spin_lock_irqsave(&bank->lock, flags);
__raw_writel(0xffffffff, wake_clear);
__raw_writel(bank->saved_wakeup, wake_set);
- spin_unlock(&bank->lock);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
return 0;
dmadbg_dumpregs(fname, line, chan, &state);
}
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
#else
#define dbg_showregs(chan) do { } while(0)
#define dbg_showchan(chan) do { } while(0)
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
+ __func__);
} else {
chan->load_state = S3C2410_DMALOAD_1RUNNING;
s3c2410_dma_loadbuffer(chan, chan->next);
return -EINVAL;
pr_debug("%s: id=%p, data=%08x, size=%d\n",
- __FUNCTION__, id, (unsigned int)data, size);
+ __func__, id, (unsigned int)data, size);
buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
if (buf == NULL) {
pr_debug("%s: out of memory (%ld alloc)\n",
- __FUNCTION__, (long)sizeof(*buf));
+ __func__, (long)sizeof(*buf));
return -ENOMEM;
}
- //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+ //pr_debug("%s: new buffer %p\n", __func__, buf);
//dbg_showchan(chan);
buf->next = NULL;
if (chan->curr == NULL) {
/* we've got nothing loaded... */
pr_debug("%s: buffer %p queued onto empty channel\n",
- __FUNCTION__, buf);
+ __func__, buf);
chan->curr = buf;
chan->end = buf;
chan->next = NULL;
} else {
pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
- chan->number, __FUNCTION__, buf);
+ chan->number, __func__, buf);
if (chan->end == NULL)
pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
- chan->number, __FUNCTION__, chan);
+ chan->number, __func__, chan);
chan->end->next = buf;
chan->end = buf;
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
+ chan->number, __func__);
return;
}
break;
if (buf->magic != BUF_MAGIC) {
printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
- chan->number, __FUNCTION__, buf);
+ chan->number, __func__, buf);
return IRQ_HANDLED;
}
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
+ chan->number, __func__);
return IRQ_HANDLED;
}
if (!chan->irq_claimed) {
pr_debug("dma%d: %s : requesting irq %d\n",
- channel, __FUNCTION__, chan->irq);
+ channel, __func__, chan->irq);
chan->irq_claimed = 1;
local_irq_restore(flags);
/* need to setup */
- pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+ pr_debug("%s: channel initialised, %p\n", __func__, chan);
return chan->number | DMACH_LOW_LEVEL;
}
if (chan->state != S3C2410_DMA_IDLE) {
pr_debug("%s: need to stop dma channel %p\n",
- __FUNCTION__, chan);
+ __func__, chan);
/* possibly flush the channel */
s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
unsigned long flags;
unsigned long tmp;
- pr_debug("%s:\n", __FUNCTION__);
+ pr_debug("%s:\n", __func__);
dbg_showchan(chan);
struct s3c2410_dma_buf *buf, *next;
unsigned long flags;
- pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+ pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
dbg_showchan(chan);
local_irq_save(flags);
if (chan->state != S3C2410_DMA_IDLE) {
- pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+ pr_debug("%s: stopping channel...\n", __func__ );
s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
}
next = buf->next;
pr_debug("%s: free buffer %p, next %p\n",
- __FUNCTION__, buf, buf->next);
+ __func__, buf, buf->next);
s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
s3c2410_dma_freebuf(buf);
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
+ __func__);
} else {
chan->load_state = S3C2410_DMALOAD_1RUNNING;
s3c2410_dma_loadbuffer(chan, chan->next);
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
- __FUNCTION__, channel, xferunit, dcon);
+ __func__, channel, xferunit, dcon);
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+ pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
dcon |= chan->dcon & dma_sel.dcon_mask;
- pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+ pr_debug("%s: New dcon is %08x\n", __func__, dcon);
switch (xferunit) {
case 1:
break;
default:
- pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+ pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
return -EINVAL;
}
dcon |= S3C2410_DCON_HWTRIG;
dcon |= S3C2410_DCON_INTREQ;
- pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+ pr_debug("%s: dcon now %08x\n", __func__, dcon);
chan->dcon = dcon;
chan->xfer_unit = xferunit;
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+ pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
chan->flags = flags;
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+ pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
chan->op_fn = rtn;
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+ pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
chan->callback_fn = rtn;
return -EINVAL;
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
- __FUNCTION__, (int)source, hwcfg, devaddr);
+ __func__, (int)source, hwcfg, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
case S3C2410_DMASRC_HW:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
+ __func__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
case S3C2410_DMASRC_MEM:
/* source is memory */
- pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
+ pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+ __func__, devaddr, hwcfg);
dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
#define NR_IRQS (MAXIRQNUM + 1)
-extern void __init h3_mmc_init(void);
+extern void h3_mmc_init(void);
extern void h3_mmc_slot_cover_handler(void *arg, int state);
#endif /* __ASM_ARCH_OMAP_H3_H */
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#ifdef CONFIG_I2C_OMAP
#include <linux/i2c.h>
-#endif
struct sys_timer;
struct i2c_board_info const *info,
unsigned len);
#else
-#define omap_register_i2c_bus(a, b, c, d) 0
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ return 0;
+}
#endif
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
/* Function Prototypes for GPIO Expander functions */
+#ifdef CONFIG_GPIOEXPANDER_OMAP
int read_gpio_expa(u8 *, int);
int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+ return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+ return 0;
+}
+#endif
#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
#define FIRST_USER_ADDRESS (0)
+#include <asm-generic/pgtable.h>
+
#else
/*
/* defines for UART registers */
-#include "asm/plat-s3c/regs-serial.h"
-#include "asm/plat-s3c/regs-watchdog.h"
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/regs-watchdog.h>
/* working in physical space... */
#undef S3C2410_WDOGREG
#ifndef __ASSEMBLY__
#ifndef MULTI_CPU
-#include "asm/cpu-single.h"
+#include <asm/cpu-single.h>
#else
-#include "asm/cpu-multi32.h"
+#include <asm/cpu-multi32.h>
#endif
#include <asm/memory.h>
Code Review / linux-2.6.git / commitdiff