* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Always build the powerpc perf_arch_fetch_caller_regs version
perf: Always build the stub perf_arch_fetch_caller_regs version
perf, probe-finder: Build fix on Debian
perf/scripts: Tuple was set from long in both branches in python_process_event()
perf: Fix 'perf sched record' deadlock
perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels
perf, x86: Fix AMD hotplug & constraint initialization
x86: Move notify_cpu_starting() callback to a later stage
x86,kgdb: Always initialize the hw breakpoint attribute
perf: Use hot regs with software sched switch/migrate events
perf: Correctly align perf event tracing buffer
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
threads.
+Optional properties:
+- fsl,firmware-phandle:
+ Usage: required only if there is no fsl,qe-firmware child node
+ Value type: <phandle>
+ Definition: Points to a firmware node (see "QE Firmware Node" below)
+ that contains the firmware that should be uploaded for this QE.
+ The compatible property for the firmware node should say,
+ "fsl,qe-firmware".
+
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
reg = <0 c000>;
};
};
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties. The node should be placed
+inside a QE node that needs it. Doing so eliminates the need for a
+fsl,firmware-phandle property. Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: A standard property. Specify a string that indicates what
+ kind of firmware it is. For QE, this should be "fsl,qe-firmware".
+
+ - fsl,firmware
+ Usage: required
+ Value type: <prop-encoded-array>, encoded as an array of bytes
+ Definition: A standard property. This property contains the firmware
+ binary "blob".
+
+Example:
+ qe1@e0080000 {
+ compatible = "fsl,qe";
+ qe_firmware:qe-firmware {
+ compatible = "fsl,qe-firmware";
+ fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+ };
+ ...
+ };
+
+ qe2@e0090000 {
+ compatible = "fsl,qe";
+ fsl,firmware-phandle = <&qe_firmware>;
+ ...
+ };
#include <asm/glue.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
+#include <asm/outercache.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
void (*dma_flush_range)(const void *, const void *);
};
-struct outer_cache_fns {
- void (*inv_range)(unsigned long, unsigned long);
- void (*clean_range)(unsigned long, unsigned long);
- void (*flush_range)(unsigned long, unsigned long);
-};
-
/*
* Select the calling method
*/
#endif
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.inv_range)
- outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.clean_range)
- outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.flush_range)
- outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user
#define __ASM_CLKDEV_H
struct clk;
+struct device;
struct clk_lookup {
struct list_head node;
#ifndef __ASSEMBLY__
struct irqaction;
+struct pt_regs;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
--- /dev/null
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+ void (*inv_range)(unsigned long, unsigned long);
+ void (*clean_range)(unsigned long, unsigned long);
+ void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+ void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.inv_range)
+ outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.clean_range)
+ outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.flush_range)
+ outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+ if (outer_cache.sync)
+ outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif /* __ASM_OUTERCACHE_H */
#include <linux/linkage.h>
#include <linux/irqflags.h>
+#include <asm/outercache.h>
+
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb() dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
-#define wmb() dmb()
+#define wmb() mb()
#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
+#define smp_mb() dmb()
+#define smp_rmb() dmb()
+#define smp_wmb() dmb()
#endif
#define read_barrier_depends() do { } while(0)
/*
* Setup an empty pt_regs. Fill SP and PC fields as
* they're needed by longjmp_break_handler.
+ *
+ * We allocate some slack between the original SP and start of
+ * our fabricated regs. To be precise we want to have worst case
+ * covered which is STMFD with all 16 regs so we allocate 2 *
+ * sizeof(struct_pt_regs)).
+ *
+ * This is to prevent any simulated instruction from writing
+ * over the regs when they are accessing the stack.
*/
"sub sp, %0, %1 \n\t"
"ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
"ldmia sp, {r0 - pc} \n\t"
:
: "r" (kcb->jprobe_saved_regs.ARM_sp),
- "I" (sizeof(struct pt_regs)),
+ "I" (sizeof(struct pt_regs) * 2),
"J" (offsetof(struct pt_regs, ARM_sp)),
"J" (offsetof(struct pt_regs, ARM_pc)),
"J" (offsetof(struct pt_regs, ARM_cpsr))
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
-6: nop
+6: W(nop)
W(ldr) r3, [r1, #-4]!
W(ldr) r4, [r1, #-4]!
W(ldr) r5, [r1, #-4]!
add pc, pc, ip
nop
- nop
+ W(nop)
W(str) r3, [r0, #-4]!
W(str) r4, [r0, #-4]!
W(str) r5, [r0, #-4]!
config OUTER_CACHE
bool
+config OUTER_CACHE_SYNC
+ bool
+ help
+ The outer cache has a outer_cache_fns.sync function pointer
+ that can be used to drain the write buffer of the outer cache.
+
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
default y
select OUTER_CACHE
+ select OUTER_CACHE_SYNC
help
This option enables the L2x0 PrimeCell.
int
default 6 if ARM_L1_CACHE_SHIFT_6
default 5
+
+config ARCH_HAS_BARRIERS
+ bool
+ help
+ This option allows the use of custom mandatory barriers
+ included via the mach/barriers.h file.
}
#endif
+static void l2x0_cache_sync(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l2x0_lock, flags);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
static inline void l2x0_inv_all(void)
{
unsigned long flags;
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;
outer_cache.flush_range = l2x0_flush_range;
+ outer_cache.sync = l2x0_cache_sync;
printk(KERN_INFO "L2X0 cache controller enabled\n");
}
*/
elf_hwcap |= HWCAP_VFP;
#ifdef CONFIG_VFPv3
- if (VFP_arch >= 3) {
+ if (VFP_arch >= 2) {
elf_hwcap |= HWCAP_VFPv3;
/*
if (rc)
goto err_bcom_rx_irq;
+ lpbfifo.dma_irqs_enabled = 1;
+
/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
lpbfifo.bcom_tx_task =
bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan 4 11:20:36 2010
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 02:21:58 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Kernel Performance Events And Counters
#
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
#
# Boot options
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
#
# Bus options
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+CONFIG_SH_SIR=y
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_ONENAND is not set
#
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
+CONFIG_SOC_CAMERA_MT9T112=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_SND_FSI_AK4642 is not set
+CONFIG_SND_FSI_DA7210=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_DA7210=y
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
+CONFIG_MMC_TMIO=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
#define VSYSCALL_AUX_ENT \
if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
+ else \
+ NEW_AUX_ENT(AT_IGNORE, 0);
#else
#define VSYSCALL_AUX_ENT
#endif /* CONFIG_VSYSCALL */
#ifdef CONFIG_SH_FPU
#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
#else
-#define FPU_AUX_ENT
+#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
#endif
extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
#define MMUCR_URB 0x00FC0000
#define MMUCR_URB_SHIFT 18
#define MMUCR_URB_NENTRIES 64
+#define MMUCR_URC 0x0000FC00
+#define MMUCR_URC_SHIFT 10
#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
#define MMUCR_SE (1 << 4)
return -ENODEV;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
BUG_ON(smp_processor_id() != cpu);
freqs.flags = 0;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
clk_set_rate(cpuclk, freq);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/dwarf.h>
#ifdef CONFIG_DWARF_UNWINDER
}
#endif
+
+EXPORT_SYMBOL_GPL(return_address);
unsigned int cpu;
struct mm_struct *mm = &init_mm;
+ enable_mmu();
atomic_inc(&mm->mm_count);
atomic_inc(&mm->mm_users);
current->active_mm = mm;
__raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
back_to_cached();
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+ int i;
+
+ /*
+ * Flush all the TLB.
+ */
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ status = __raw_readl(MMUCR);
+ status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+ if (status == 0)
+ status = MMUCR_URB_NENTRIES;
+
+ for (i = 0; i < status; i++)
+ __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+ back_to_cached();
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
for (i = 0; i < ways; i++)
__raw_writel(data, addr + (i << 8));
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+
+ /*
+ * Flush all the TLB.
+ *
+ * Write to the MMU control register's bit:
+ * TF-bit for SH-3, TI-bit for SH-4.
+ * It's same position, bit #2.
+ */
+ local_irq_save(flags);
+ status = __raw_readl(MMUCR);
+ status |= 0x04;
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
__raw_writel(data, addr);
back_to_cached();
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+ int i;
+
+ /*
+ * Flush all the TLB.
+ */
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ status = __raw_readl(MMUCR);
+ status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+ if (status == 0)
+ status = MMUCR_URB_NENTRIES;
+
+ for (i = 0; i < status; i++)
+ __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+ back_to_cached();
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
local_irq_save(flags);
- /* Load the entry into the TLB */
- __update_tlb(vma, addr, pte);
-
- /* ... and wire it up. */
status = __raw_readl(MMUCR);
urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URB;
+ status &= ~MMUCR_URC;
/*
* Make sure we're not trying to wire the last TLB entry slot.
urb = urb % MMUCR_URB_NENTRIES;
+ /*
+ * Insert this entry into the highest non-wired TLB slot (via
+ * the URC field).
+ */
+ status |= (urb << MMUCR_URC_SHIFT);
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+
+ /* Load the entry into the TLB */
+ __update_tlb(vma, addr, pte);
+
+ /* ... and wire it up. */
+ status = __raw_readl(MMUCR);
+
+ status &= ~MMUCR_URB;
status |= (urb << MMUCR_URB_SHIFT);
+
__raw_writel(status, MMUCR);
ctrl_barrier();
local_irq_restore(flags);
}
}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
list_del_init(&tty->tty_files);
file_list_unlock();
+ put_pid(tty->pgrp);
+ put_pid(tty->session);
free_tty_struct(tty);
}
static int gyration_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
- struct input_dev *input = field->hidinput->input;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
+ return 0;
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK &&
(usage->hid & 0xff) == 0x82) {
+ struct input_dev *input = field->hidinput->input;
input_event(input, usage->type, usage->code, 1);
input_sync(input);
input_event(input, usage->type, usage->code, 0);
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
/* On x86 a breakpoint stop requires it to be decremented */
if (addr + 1 == kgdbts_regs.ip)
offset = -1;
+#elif defined(CONFIG_SUPERH)
+ /* On SUPERH a breakpoint stop requires it to be decremented */
+ if (addr + 2 == kgdbts_regs.pc)
+ offset = -2;
#endif
if (strcmp(arg, "silent") &&
instruction_pointer(&kgdbts_regs) + offset != addr) {
#ifdef CONFIG_X86
/* On x86 adjust the instruction pointer if needed */
kgdbts_regs.ip += offset;
+#elif defined(CONFIG_SUPERH)
+ kgdbts_regs.pc += offset;
#endif
return 0;
}
if (!np->type)
np->type = "<NULL>";
}
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ while (tag == OF_DT_BEGIN_NODE || tag == OF_DT_NOP) {
+ if (tag == OF_DT_NOP)
+ *p += 4;
+ else
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
tag = be32_to_cpup((__be32 *)(*p));
}
if (tag != OF_DT_END_NODE) {
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9602, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK, 0x9602, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AI, 0x9602, quirk_disable_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
/* Go through the list of Hypertransport capabilities and
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
quirk_msi_intx_disable_bug);
-/*
- * MSI does not work with the AMD RS780/RS880 internal graphics and HDMI audio
- * devices unless the BIOS has initialized the nb_cntl.strap_msi_enable bit.
- */
-static void __init rs780_int_gfx_disable_msi(struct pci_dev *int_gfx_bridge)
-{
- u32 nb_cntl;
-
- if (!int_gfx_bridge->subordinate)
- return;
-
- pci_bus_write_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
- 0x60, 0);
- pci_bus_read_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
- 0x64, &nb_cntl);
-
- if (!(nb_cntl & BIT(10))) {
- dev_warn(&int_gfx_bridge->dev,
- FW_WARN "RS780: MSI for internal graphics disabled\n");
- int_gfx_bridge->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
- }
-}
-
-#define PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX 0x9602
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,
- PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
- rs780_int_gfx_disable_msi);
-/* wrong vendor ID on M4A785TD motherboard: */
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK,
- PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
- rs780_int_gfx_disable_msi);
-
#endif /* CONFIG_PCI_MSI */
#ifdef CONFIG_PCI_IOV
{
struct at91_udc *udc = _udc;
u32 rescans = 5;
+ int disable_clock = 0;
+
+ if (!udc->clocked) {
+ clk_on(udc);
+ disable_clock = 1;
+ }
while (rescans--) {
u32 status;
}
}
+ if (disable_clock)
+ clk_off(udc);
+
return IRQ_HANDLED;
}
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
memset(&mss, 0, sizeof mss);
mss.vma = vma;
+ /* mmap_sem is held in m_start */
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
};
struct pagemapread {
- u64 __user *out, *end;
+ int pos, len;
+ u64 *buffer;
};
#define PM_ENTRY_BYTES sizeof(u64)
static int add_to_pagemap(unsigned long addr, u64 pfn,
struct pagemapread *pm)
{
- if (put_user(pfn, pm->out))
- return -EFAULT;
- pm->out++;
- if (pm->out >= pm->end)
+ pm->buffer[pm->pos++] = pfn;
+ if (pm->pos >= pm->len)
return PM_END_OF_BUFFER;
return 0;
}
* determine which areas of memory are actually mapped and llseek to
* skip over unmapped regions.
*/
+#define PAGEMAP_WALK_SIZE (PMD_SIZE)
static ssize_t pagemap_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
- struct page **pages, *page;
- unsigned long uaddr, uend;
struct mm_struct *mm;
struct pagemapread pm;
- int pagecount;
int ret = -ESRCH;
struct mm_walk pagemap_walk = {};
unsigned long src;
unsigned long svpfn;
unsigned long start_vaddr;
unsigned long end_vaddr;
+ int copied = 0;
if (!task)
goto out;
if (!mm)
goto out_task;
-
- uaddr = (unsigned long)buf & PAGE_MASK;
- uend = (unsigned long)(buf + count);
- pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE;
- ret = 0;
- if (pagecount == 0)
- goto out_mm;
- pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL);
+ pm.len = PM_ENTRY_BYTES * (PAGEMAP_WALK_SIZE >> PAGE_SHIFT);
+ pm.buffer = kmalloc(pm.len, GFP_TEMPORARY);
ret = -ENOMEM;
- if (!pages)
+ if (!pm.buffer)
goto out_mm;
- down_read(¤t->mm->mmap_sem);
- ret = get_user_pages(current, current->mm, uaddr, pagecount,
- 1, 0, pages, NULL);
- up_read(¤t->mm->mmap_sem);
-
- if (ret < 0)
- goto out_free;
-
- if (ret != pagecount) {
- pagecount = ret;
- ret = -EFAULT;
- goto out_pages;
- }
-
- pm.out = (u64 __user *)buf;
- pm.end = (u64 __user *)(buf + count);
-
pagemap_walk.pmd_entry = pagemap_pte_range;
pagemap_walk.pte_hole = pagemap_pte_hole;
pagemap_walk.hugetlb_entry = pagemap_hugetlb_range;
* user buffer is tracked in "pm", and the walk
* will stop when we hit the end of the buffer.
*/
- ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk);
- if (ret == PM_END_OF_BUFFER)
- ret = 0;
- /* don't need mmap_sem for these, but this looks cleaner */
- *ppos += (char __user *)pm.out - buf;
- if (!ret)
- ret = (char __user *)pm.out - buf;
-
-out_pages:
- for (; pagecount; pagecount--) {
- page = pages[pagecount-1];
- if (!PageReserved(page))
- SetPageDirty(page);
- page_cache_release(page);
+ ret = 0;
+ while (count && (start_vaddr < end_vaddr)) {
+ int len;
+ unsigned long end;
+
+ pm.pos = 0;
+ end = start_vaddr + PAGEMAP_WALK_SIZE;
+ /* overflow ? */
+ if (end < start_vaddr || end > end_vaddr)
+ end = end_vaddr;
+ down_read(&mm->mmap_sem);
+ ret = walk_page_range(start_vaddr, end, &pagemap_walk);
+ up_read(&mm->mmap_sem);
+ start_vaddr = end;
+
+ len = min(count, PM_ENTRY_BYTES * pm.pos);
+ if (copy_to_user(buf, pm.buffer, len) < 0) {
+ ret = -EFAULT;
+ goto out_free;
+ }
+ copied += len;
+ buf += len;
+ count -= len;
}
+ *ppos += copied;
+ if (!ret || ret == PM_END_OF_BUFFER)
+ ret = copied;
+
out_free:
- kfree(pages);
+ kfree(pm.buffer);
out_mm:
mmput(mm);
out_task:
save_mount_options(s, data);
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
- if (!sbi) {
- errval = -ENOMEM;
- goto error_alloc;
- }
+ if (!sbi)
+ return -ENOMEM;
s->s_fs_info = sbi;
/* Set default values for options: non-aggressive tails, RO on errors */
REISERFS_SB(s)->s_mount_opt |= (1 << REISERFS_SMALLTAIL);
return (0);
error:
- reiserfs_write_unlock(s);
-error_alloc:
if (jinit_done) { /* kill the commit thread, free journal ram */
journal_release_error(NULL, s);
}
+ reiserfs_write_unlock(s);
+
reiserfs_free_bitmap_cache(s);
if (SB_BUFFER_WITH_SB(s))
brelse(SB_BUFFER_WITH_SB(s));
#ifndef ASMARM_AMBA_H
#define ASMARM_AMBA_H
+#include <linux/device.h>
+#include <linux/resource.h>
+
#define AMBA_NR_IRQS 2
struct amba_device {
+#include <linux/types.h>
+
/* platform data for the PL061 GPIO driver */
struct pl061_platform_data {
extern void cancel_freezing(struct task_struct *p);
#ifdef CONFIG_CGROUP_FREEZER
-extern int cgroup_frozen(struct task_struct *task);
+extern int cgroup_freezing_or_frozen(struct task_struct *task);
#else /* !CONFIG_CGROUP_FREEZER */
-static inline int cgroup_frozen(struct task_struct *task) { return 0; }
+static inline int cgroup_freezing_or_frozen(struct task_struct *task)
+{
+ return 0;
+}
#endif /* !CONFIG_CGROUP_FREEZER */
/*
struct freezer, css);
}
-int cgroup_frozen(struct task_struct *task)
+int cgroup_freezing_or_frozen(struct task_struct *task)
{
struct freezer *freezer;
enum freezer_state state;
task_lock(task);
freezer = task_freezer(task);
- state = freezer->state;
+ if (!freezer->css.cgroup->parent)
+ state = CGROUP_THAWED; /* root cgroup can't be frozen */
+ else
+ state = freezer->state;
task_unlock(task);
- return state == CGROUP_FROZEN;
+ return (state == CGROUP_FREEZING) || (state == CGROUP_FROZEN);
}
/*
struct pt_regs *linux_regs;
};
+/* Exception state values */
+#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
+#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
+#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */
+#define DCPU_SSTEP 0x8 /* CPU is single stepping */
+
static struct debuggerinfo_struct {
void *debuggerinfo;
struct task_struct *task;
+ int exception_state;
} kgdb_info[NR_CPUS];
/**
/*
* Copy the binary array pointed to by buf into mem. Fix $, #, and
- * 0x7d escaped with 0x7d. Return a pointer to the character after
- * the last byte written.
+ * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
+ * The input buf is overwitten with the result to write to mem.
*/
static int kgdb_ebin2mem(char *buf, char *mem, int count)
{
- int err = 0;
- char c;
+ int size = 0;
+ char *c = buf;
while (count-- > 0) {
- c = *buf++;
- if (c == 0x7d)
- c = *buf++ ^ 0x20;
-
- err = probe_kernel_write(mem, &c, 1);
- if (err)
- break;
-
- mem++;
+ c[size] = *buf++;
+ if (c[size] == 0x7d)
+ c[size] = *buf++ ^ 0x20;
+ size++;
}
- return err;
+ return probe_kernel_write(mem, c, size);
}
/*
return find_task_by_pid_ns(tid, &init_pid_ns);
}
-/*
- * CPU debug state control:
- */
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(struct pt_regs *regs)
-{
- unsigned long flags;
- int cpu;
-
- local_irq_save(flags);
- cpu = raw_smp_processor_id();
- kgdb_info[cpu].debuggerinfo = regs;
- kgdb_info[cpu].task = current;
- /*
- * Make sure the above info reaches the primary CPU before
- * our cpu_in_kgdb[] flag setting does:
- */
- smp_wmb();
- atomic_set(&cpu_in_kgdb[cpu], 1);
-
- /* Disable any cpu specific hw breakpoints */
- kgdb_disable_hw_debug(regs);
-
- /* Wait till primary CPU is done with debugging */
- while (atomic_read(&passive_cpu_wait[cpu]))
- cpu_relax();
-
- kgdb_info[cpu].debuggerinfo = NULL;
- kgdb_info[cpu].task = NULL;
-
- /* fix up hardware debug registers on local cpu */
- if (arch_kgdb_ops.correct_hw_break)
- arch_kgdb_ops.correct_hw_break();
-
- /* Signal the primary CPU that we are done: */
- atomic_set(&cpu_in_kgdb[cpu], 0);
- touch_softlockup_watchdog_sync();
- clocksource_touch_watchdog();
- local_irq_restore(flags);
-}
-#endif
-
/*
* Some architectures need cache flushes when we set/clear a
* breakpoint:
return 1;
}
-/*
- * kgdb_handle_exception() - main entry point from a kernel exception
- *
- * Locking hierarchy:
- * interface locks, if any (begin_session)
- * kgdb lock (kgdb_active)
- */
-int
-kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs)
{
- struct kgdb_state kgdb_var;
- struct kgdb_state *ks = &kgdb_var;
unsigned long flags;
int sstep_tries = 100;
int error = 0;
int i, cpu;
-
- ks->cpu = raw_smp_processor_id();
- ks->ex_vector = evector;
- ks->signo = signo;
- ks->ex_vector = evector;
- ks->err_code = ecode;
- ks->kgdb_usethreadid = 0;
- ks->linux_regs = regs;
-
- if (kgdb_reenter_check(ks))
- return 0; /* Ouch, double exception ! */
-
+ int trace_on = 0;
acquirelock:
/*
* Interrupts will be restored by the 'trap return' code, except when
*/
local_irq_save(flags);
- cpu = raw_smp_processor_id();
+ cpu = ks->cpu;
+ kgdb_info[cpu].debuggerinfo = regs;
+ kgdb_info[cpu].task = current;
+ /*
+ * Make sure the above info reaches the primary CPU before
+ * our cpu_in_kgdb[] flag setting does:
+ */
+ atomic_inc(&cpu_in_kgdb[cpu]);
/*
- * Acquire the kgdb_active lock:
+ * CPU will loop if it is a slave or request to become a kgdb
+ * master cpu and acquire the kgdb_active lock:
*/
- while (atomic_cmpxchg(&kgdb_active, -1, cpu) != -1)
+ while (1) {
+ if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) {
+ if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu)
+ break;
+ } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) {
+ if (!atomic_read(&passive_cpu_wait[cpu]))
+ goto return_normal;
+ } else {
+return_normal:
+ /* Return to normal operation by executing any
+ * hw breakpoint fixup.
+ */
+ if (arch_kgdb_ops.correct_hw_break)
+ arch_kgdb_ops.correct_hw_break();
+ if (trace_on)
+ tracing_on();
+ atomic_dec(&cpu_in_kgdb[cpu]);
+ touch_softlockup_watchdog_sync();
+ clocksource_touch_watchdog();
+ local_irq_restore(flags);
+ return 0;
+ }
cpu_relax();
+ }
/*
* For single stepping, try to only enter on the processor
if (kgdb_io_ops->pre_exception)
kgdb_io_ops->pre_exception();
- kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs;
- kgdb_info[ks->cpu].task = current;
-
kgdb_disable_hw_debug(ks->linux_regs);
/*
*/
if (!kgdb_single_step) {
for (i = 0; i < NR_CPUS; i++)
- atomic_set(&passive_cpu_wait[i], 1);
+ atomic_inc(&passive_cpu_wait[i]);
}
- /*
- * spin_lock code is good enough as a barrier so we don't
- * need one here:
- */
- atomic_set(&cpu_in_kgdb[ks->cpu], 1);
-
#ifdef CONFIG_SMP
/* Signal the other CPUs to enter kgdb_wait() */
if ((!kgdb_single_step) && kgdb_do_roundup)
kgdb_single_step = 0;
kgdb_contthread = current;
exception_level = 0;
+ trace_on = tracing_is_on();
+ if (trace_on)
+ tracing_off();
/* Talk to debugger with gdbserial protocol */
error = gdb_serial_stub(ks);
if (kgdb_io_ops->post_exception)
kgdb_io_ops->post_exception();
- kgdb_info[ks->cpu].debuggerinfo = NULL;
- kgdb_info[ks->cpu].task = NULL;
- atomic_set(&cpu_in_kgdb[ks->cpu], 0);
+ atomic_dec(&cpu_in_kgdb[ks->cpu]);
if (!kgdb_single_step) {
for (i = NR_CPUS-1; i >= 0; i--)
- atomic_set(&passive_cpu_wait[i], 0);
+ atomic_dec(&passive_cpu_wait[i]);
/*
* Wait till all the CPUs have quit
* from the debugger.
else
kgdb_sstep_pid = 0;
}
+ if (trace_on)
+ tracing_on();
/* Free kgdb_active */
atomic_set(&kgdb_active, -1);
touch_softlockup_watchdog_sync();
return error;
}
+/*
+ * kgdb_handle_exception() - main entry point from a kernel exception
+ *
+ * Locking hierarchy:
+ * interface locks, if any (begin_session)
+ * kgdb lock (kgdb_active)
+ */
+int
+kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+{
+ struct kgdb_state kgdb_var;
+ struct kgdb_state *ks = &kgdb_var;
+ int ret;
+
+ ks->cpu = raw_smp_processor_id();
+ ks->ex_vector = evector;
+ ks->signo = signo;
+ ks->ex_vector = evector;
+ ks->err_code = ecode;
+ ks->kgdb_usethreadid = 0;
+ ks->linux_regs = regs;
+
+ if (kgdb_reenter_check(ks))
+ return 0; /* Ouch, double exception ! */
+ kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER;
+ ret = kgdb_cpu_enter(ks, regs);
+ kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER;
+ return ret;
+}
+
int kgdb_nmicallback(int cpu, void *regs)
{
#ifdef CONFIG_SMP
+ struct kgdb_state kgdb_var;
+ struct kgdb_state *ks = &kgdb_var;
+
+ memset(ks, 0, sizeof(struct kgdb_state));
+ ks->cpu = cpu;
+ ks->linux_regs = regs;
+
if (!atomic_read(&cpu_in_kgdb[cpu]) &&
- atomic_read(&kgdb_active) != cpu &&
- atomic_read(&cpu_in_kgdb[atomic_read(&kgdb_active)])) {
- kgdb_wait((struct pt_regs *)regs);
+ atomic_read(&kgdb_active) != -1 &&
+ atomic_read(&kgdb_active) != cpu) {
+ kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE;
+ kgdb_cpu_enter(ks, regs);
+ kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE;
return 0;
}
#endif
*/
void kgdb_breakpoint(void)
{
- atomic_set(&kgdb_setting_breakpoint, 1);
+ atomic_inc(&kgdb_setting_breakpoint);
wmb(); /* Sync point before breakpoint */
arch_kgdb_breakpoint();
wmb(); /* Sync point after breakpoint */
- atomic_set(&kgdb_setting_breakpoint, 0);
+ atomic_dec(&kgdb_setting_breakpoint);
}
EXPORT_SYMBOL_GPL(kgdb_breakpoint);
printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds "
"(%d tasks refusing to freeze):\n",
elapsed_csecs / 100, elapsed_csecs % 100, todo);
- show_state();
read_lock(&tasklist_lock);
do_each_thread(g, p) {
task_lock(p);
if (freezing(p) && !freezer_should_skip(p))
- printk(KERN_ERR " %s\n", p->comm);
+ sched_show_task(p);
cancel_freezing(p);
task_unlock(p);
} while_each_thread(g, p);
if (nosig_only && should_send_signal(p))
continue;
- if (cgroup_frozen(p))
+ if (cgroup_freezing_or_frozen(p))
continue;
thaw_process(p);
get_task_struct(mt);
task_rq_unlock(rq, &flags);
- wake_up_process(rq->migration_thread);
+ wake_up_process(mt);
put_task_struct(mt);
wait_for_completion(&req.done);
tlb_migrate_finish(p->mm);
p->se.nr_wakeups_idle = 0;
p->sched_info.bkl_count = 0;
#endif
- p->se.sum_exec_runtime = 0;
- p->se.prev_sum_exec_runtime = 0;
- p->nvcsw = 0;
- p->nivcsw = 0;
}
for (i = 0; i < nr_pages; i++) {
if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
- return;
+ goto out;
p = cpu_buffer->pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
- return;
+ goto out;
rb_reset_cpu(cpu_buffer);
rb_check_pages(cpu_buffer);
+out:
spin_unlock_irq(&cpu_buffer->reader_lock);
}
for (i = 0; i < nr_pages; i++) {
if (RB_WARN_ON(cpu_buffer, list_empty(pages)))
- return;
+ goto out;
p = pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
rb_reset_cpu(cpu_buffer);
rb_check_pages(cpu_buffer);
+out:
spin_unlock_irq(&cpu_buffer->reader_lock);
}
int this_cpu;
u64 now;
- raw_local_irq_save(flags);
+ local_irq_save(flags);
this_cpu = raw_smp_processor_id();
now = cpu_clock(this_cpu);
arch_spin_unlock(&trace_clock_struct.lock);
out:
- raw_local_irq_restore(flags);
+ local_irq_restore(flags);
return now;
}
Code Review / linux-2.6.git / commitdiff