]> nv-tegra.nvidia Code Review - linux-2.6.git/commitdiff
[ARM] 3490/1: i.MX: move uart resources to board files
authorSascha Hauer <sascha@saschahauer.de>
Thu, 4 May 2006 13:07:42 +0000 (14:07 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 4 May 2006 13:07:42 +0000 (14:07 +0100)
Patch from Sascha Hauer

This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-imx/generic.c
arch/arm/mach-imx/mx1ads.c
drivers/serial/imx.c
include/asm-arm/arch-imx/imx-uart.h [new file with mode: 0644]

index 9d8331be2b58ec359d8b262352be12f3b0f2056c..12ea58a3b84f2472ac96a3d869f4e26ba01e0d00 100644 (file)
@@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 }
 EXPORT_SYMBOL(imx_set_mmc_info);
 
-static struct resource imx_uart1_resources[] = {
-       [0] = {
-               .start  = 0x00206000,
-               .end    = 0x002060FF,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = (UART1_MINT_RX),
-               .end    = (UART1_MINT_RX),
-               .flags  = IORESOURCE_IRQ,
-       },
-       [2] = {
-               .start  = (UART1_MINT_TX),
-               .end    = (UART1_MINT_TX),
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device imx_uart1_device = {
-       .name           = "imx-uart",
-       .id             = 0,
-       .num_resources  = ARRAY_SIZE(imx_uart1_resources),
-       .resource       = imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-       [0] = {
-               .start  = 0x00207000,
-               .end    = 0x002070FF,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = (UART2_MINT_RX),
-               .end    = (UART2_MINT_RX),
-               .flags  = IORESOURCE_IRQ,
-       },
-       [2] = {
-               .start  = (UART2_MINT_TX),
-               .end    = (UART2_MINT_TX),
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device imx_uart2_device = {
-       .name           = "imx-uart",
-       .id             = 1,
-       .num_resources  = ARRAY_SIZE(imx_uart2_resources),
-       .resource       = imx_uart2_resources,
-};
-
 static struct imxfb_mach_info imx_fb_info;
 
 void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
@@ -283,8 +233,6 @@ static struct platform_device imxfb_device = {
 static struct platform_device *devices[] __initdata = {
        &imx_mmc_device,
        &imxfb_device,
-       &imx_uart1_device,
-       &imx_uart2_device,
 };
 
 static struct map_desc imx_io_desc[] __initdata = {
index e34d0df90aed897e606d44a4ab8f5f607bbfd25a..e1f6c0bbe1e74ce586d743bc091066be260e803e 100644 (file)
@@ -26,6 +26,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = {
        .resource       = cs89x0_resources,
 };
 
+static struct imxuart_platform_data uart_pdata = {
+       .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource imx_uart1_resources[] = {
+       [0] = {
+               .start  = 0x00206000,
+               .end    = 0x002060FF,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = (UART1_MINT_RX),
+               .end    = (UART1_MINT_RX),
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = (UART1_MINT_TX),
+               .end    = (UART1_MINT_TX),
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device imx_uart1_device = {
+       .name           = "imx-uart",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(imx_uart1_resources),
+       .resource       = imx_uart1_resources,
+       .dev = {
+               .platform_data = &uart_pdata,
+       }
+};
+
+static struct resource imx_uart2_resources[] = {
+       [0] = {
+               .start  = 0x00207000,
+               .end    = 0x002070FF,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = (UART2_MINT_RX),
+               .end    = (UART2_MINT_RX),
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = (UART2_MINT_TX),
+               .end    = (UART2_MINT_TX),
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device imx_uart2_device = {
+       .name           = "imx-uart",
+       .id             = 1,
+       .num_resources  = ARRAY_SIZE(imx_uart2_resources),
+       .resource       = imx_uart2_resources,
+       .dev = {
+               .platform_data = &uart_pdata,
+       }
+};
+
 static struct platform_device *devices[] __initdata = {
        &cs89x0_device,
+       &imx_uart1_device,
+       &imx_uart2_device,
 };
 
 #ifdef CONFIG_MMC_IMX
@@ -75,6 +138,17 @@ mx1ads_init(void)
        imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
        imx_set_mmc_info(&mx1ads_mmc_info);
 #endif
+
+       imx_gpio_mode(PC9_PF_UART1_CTS);
+       imx_gpio_mode(PC10_PF_UART1_RTS);
+       imx_gpio_mode(PC11_PF_UART1_TXD);
+       imx_gpio_mode(PC12_PF_UART1_RXD);
+
+       imx_gpio_mode(PB28_PF_UART2_CTS);
+       imx_gpio_mode(PB29_PF_UART2_RTS);
+       imx_gpio_mode(PB30_PF_UART2_TXD);
+       imx_gpio_mode(PB31_PF_UART2_RXD);
+
        platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
index c3b7a6673e9c81a8bea851513c61fc900b552fde..d202eb4f3848f0cade4b4b2ed841f34f76703241 100644 (file)
@@ -45,6 +45,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_IMX_MAJOR       204
@@ -73,7 +74,8 @@ struct imx_port {
        struct uart_port        port;
        struct timer_list       timer;
        unsigned int            old_status;
-       int txirq,rxirq,rtsirq;
+       int                     txirq,rxirq,rtsirq;
+       int                     have_rtscts:1;
 };
 
 /*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
                ucr2 = UCR2_SRST | UCR2_IRTS;
 
        if (termios->c_cflag & CRTSCTS) {
-               ucr2 &= ~UCR2_IRTS;
-               ucr2 |= UCR2_CTSC;
+               if( sport->have_rtscts ) {
+                       ucr2 &= ~UCR2_IRTS;
+                       ucr2 |= UCR2_CTSC;
+               } else {
+                       termios->c_cflag &= ~CRTSCTS;
+               }
        }
 
        if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
                imx_ports[i].timer.function = imx_timeout;
                imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
        }
-
-       imx_gpio_mode(PC9_PF_UART1_CTS);
-       imx_gpio_mode(PC10_PF_UART1_RTS);
-       imx_gpio_mode(PC11_PF_UART1_TXD);
-       imx_gpio_mode(PC12_PF_UART1_RXD);
-       imx_gpio_mode(PB28_PF_UART2_CTS);
-       imx_gpio_mode(PB29_PF_UART2_RTS);
-
-       imx_gpio_mode(PB30_PF_UART2_TXD);
-       imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
-       * is implemented.
-       */
-       imx_gpio_mode(PD7_AF_UART2_DTR);
-       imx_gpio_mode(PD8_AF_UART2_DCD);
-       imx_gpio_mode(PD9_AF_UART2_RI);
-       imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
 }
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
 
 static int serial_imx_probe(struct platform_device *dev)
 {
+       struct imxuart_platform_data *pdata;
+
        imx_ports[dev->id].port.dev = &dev->dev;
+
+       pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+       if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+               imx_ports[dev->id].have_rtscts = 1;
+
        uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
        platform_set_drvdata(dev, &imx_ports[dev->id]);
        return 0;
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
new file mode 100644 (file)
index 0000000..3a685e1
--- /dev/null
@@ -0,0 +1,10 @@
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+       unsigned int flags;
+};
+
+#endif