* Called by notif.c:wusb_handle_dn_connect()
* when a DN_Connect is received.
*
- * wusbhc_devconnect_auth() Called by rh.c:wusbhc_rh_port_reset() when
- * doing the device connect sequence.
- *
* wusb_devconnect_acked() Ack done, release resources.
*
* wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn()
* process a disconenct request from a
* device.
*
- * wusb_dev_reset() Called by rh.c:wusbhc_rh_port_reset() when
- * resetting a device.
- *
* __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when
* disabling a port.
*
port->wusb_dev = wusb_dev;
port->status |= USB_PORT_STAT_CONNECTION;
port->change |= USB_PORT_STAT_C_CONNECTION;
- port->reset_count = 0;
/* Now the port status changed to connected; khubd will
* pick the change up and try to reset the port to bring it to
* the enabled state--so this process returns up to the stack
- * and it calls back into wusbhc_rh_port_reset() who will call
- * devconnect_auth().
+ * and it calls back into wusbhc_rh_port_reset().
*/
error_unlock:
mutex_unlock(&wusbhc->mutex);
wusb_dev_put(wusb_dev);
}
port->wusb_dev = NULL;
- /* don't reset the reset_count to zero or wusbhc_rh_port_reset will get
- * confused! We only reset to zero when we connect a new device.
- */
/* After a device disconnects, change the GTK (see [WUSB]
* section 6.2.11.2). */
*/
}
-/*
- * Authenticate a device into the WUSB Cluster
- *
- * Called from the Root Hub code (rh.c:wusbhc_rh_port_reset()) when
- * asking for a reset on a port that is not enabled (ie: first connect
- * on the port).
- *
- * Performs the 4way handshake to allow the device to comunicate w/ the
- * WUSB Cluster securely; once done, issue a request to the device for
- * it to change to address 0.
- *
- * This mimics the reset step of Wired USB that once resetting a
- * device, leaves the port in enabled state and the dev with the
- * default address (0).
- *
- * WUSB1.0[7.1.2]
- *
- * @port_idx: port where the change happened--This is the index into
- * the wusbhc port array, not the USB port number.
- */
-int wusbhc_devconnect_auth(struct wusbhc *wusbhc, u8 port_idx)
-{
- struct device *dev = wusbhc->dev;
- struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
-
- d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
- port->status &= ~USB_PORT_STAT_RESET;
- port->status |= USB_PORT_STAT_ENABLE;
- port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
- d_fnend(3, dev, "(%p, %u) = 0\n", wusbhc, port_idx);
- return 0;
-}
-
/*
* Refresh the list of keep alives to emit in the MMC
*
mutex_unlock(&wusbhc->mutex);
}
-/*
- * Reset a WUSB device on a HWA
- *
- * @wusbhc
- * @port_idx Index of the port where the device is
- *
- * In Wireless USB, a reset is more or less equivalent to a full
- * disconnect; so we just do a full disconnect and send the device a
- * Device Reset IE (WUSB1.0[7.5.11]) giving it a few millisecs (6 MMCs).
- *
- * @wusbhc should be refcounted and unlocked
- */
-int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port_idx)
-{
- int result;
- struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
- struct wuie_reset *ie;
-
- d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
- mutex_lock(&wusbhc->mutex);
- result = 0;
- wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
- if (wusb_dev == NULL) {
- /* reset no device? ignore */
- dev_dbg(dev, "RESET: no device at port %u, ignoring\n",
- port_idx);
- goto error_unlock;
- }
- result = -ENOMEM;
- ie = kzalloc(sizeof(*ie), GFP_KERNEL);
- if (ie == NULL)
- goto error_unlock;
- ie->hdr.bLength = sizeof(ie->hdr) + sizeof(ie->CDID);
- ie->hdr.bIEIdentifier = WUIE_ID_RESET_DEVICE;
- ie->CDID = wusb_dev->cdid;
- result = wusbhc_mmcie_set(wusbhc, 0xff, 6, &ie->hdr);
- if (result < 0) {
- dev_err(dev, "RESET: cant's set MMC: %d\n", result);
- goto error_kfree;
- }
- __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
-
- /* 120ms, hopefully 6 MMCs (FIXME) */
- msleep(120);
- wusbhc_mmcie_rm(wusbhc, &ie->hdr);
-error_kfree:
- kfree(ie);
-error_unlock:
- mutex_unlock(&wusbhc->mutex);
- d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result);
- return result;
-}
-
/*
* Handle a Device Notification coming a host
*
/*
* Reset a fake port
*
- * This can be called to reset a port from any other state or to reset
- * it when connecting. In Wireless USB they are different; when doing
- * a new connect that involves going over the authentication. When
- * just reseting, its a different story.
+ * Using a Reset Device IE is too heavyweight as it causes the device
+ * to enter the UnConnected state and leave the cluster, this can mean
+ * that when the device reconnects it is connected to a different fake
+ * port.
*
- * The Linux USB stack resets a port twice before it considers it
- * enabled, so we have to detect and ignore that.
+ * Instead, reset authenticated devices with a SetAddress(0), followed
+ * by a SetAddresss(AuthAddr).
+ *
+ * For unauthenticated devices just pretend to reset but do nothing.
+ * If the device initialization continues to fail it will eventually
+ * time out after TrustTimeout and enter the UnConnected state.
*
* @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
*
{
int result = 0;
struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+ struct wusb_dev *wusb_dev = port->wusb_dev;
+
+ port->status |= USB_PORT_STAT_RESET;
+ port->change |= USB_PORT_STAT_C_RESET;
- d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n",
- wusbhc, port_idx);
- if (port->reset_count == 0) {
- wusbhc_devconnect_auth(wusbhc, port_idx);
- port->reset_count++;
- } else if (port->reset_count == 1)
- /* see header */
- d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx "
- "%u\n", port_idx);
+ if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH)
+ result = 0;
else
- result = wusbhc_dev_reset(wusbhc, port_idx);
- d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n",
- wusbhc, port_idx, result);
+ result = wusb_dev_update_address(wusbhc, wusb_dev);
+
+ port->status &= ~USB_PORT_STAT_RESET;
+ port->status |= USB_PORT_STAT_ENABLE;
+ port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
+
return result;
}
u16 status;
u16 change;
struct wusb_dev *wusb_dev; /* connected device's info */
- unsigned reset_count;
u32 ptk_tkid;
};
extern int wusbhc_devconnect_start(struct wusbhc *wusbhc,
const struct wusb_ckhdid *chid);
extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc);
-extern int wusbhc_devconnect_auth(struct wusbhc *, u8);
extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr,
struct wusb_dn_hdr *dn_hdr, size_t size);
-extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port);
extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port);
extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
void *priv);
extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *,
struct wusb_ckhdid *ck);
void wusbhc_gtk_rekey(struct wusbhc *wusbhc);
+int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
/* WUSB Cluster ID handling */
Code Review / linux-2.6.git / commitdiff