]> nv-tegra.nvidia Code Review - linux-2.6.git/commitdiff
Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
authorLinus Torvalds <torvalds@linux-foundation.org>
Sat, 5 Dec 2009 17:49:59 +0000 (09:49 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 5 Dec 2009 17:49:59 +0000 (09:49 -0800)
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mutex: Fix missing conditions to build mutex_spin_on_owner()
  mutex: Better control mutex adaptive spinning config
  locking, task_struct: Reduce size on TRACE_IRQFLAGS and 64bit
  locking: Use __[SPIN|RW]_LOCK_UNLOCKED in [spin|rw]_lock_init()
  locking: Remove unused prototype
  locking: Reduce ifdefs in kernel/spinlock.c
  locking: Make inlining decision Kconfig based

686 files changed:
.gitignore
Documentation/dontdiff
Documentation/fb/framebuffer.txt
Documentation/filesystems/caching/fscache.txt
Documentation/filesystems/caching/netfs-api.txt
Documentation/filesystems/ocfs2.txt
Documentation/kernel-parameters.txt
Documentation/pcmcia/driver-changes.txt
Documentation/slow-work.txt
Documentation/vm/page-types.c
MAINTAINERS
Makefile
arch/alpha/boot/tools/objstrip.c
arch/alpha/include/asm/fcntl.h
arch/alpha/include/asm/thread_info.h
arch/alpha/kernel/core_marvel.c
arch/alpha/kernel/core_titan.c
arch/alpha/kernel/irq.c
arch/alpha/kernel/irq_alpha.c
arch/alpha/kernel/irq_i8259.c
arch/alpha/kernel/irq_pyxis.c
arch/alpha/kernel/irq_srm.c
arch/alpha/kernel/sys_alcor.c
arch/alpha/kernel/sys_cabriolet.c
arch/alpha/kernel/sys_dp264.c
arch/alpha/kernel/sys_eb64p.c
arch/alpha/kernel/sys_eiger.c
arch/alpha/kernel/sys_jensen.c
arch/alpha/kernel/sys_marvel.c
arch/alpha/kernel/sys_mikasa.c
arch/alpha/kernel/sys_noritake.c
arch/alpha/kernel/sys_rawhide.c
arch/alpha/kernel/sys_ruffian.c
arch/alpha/kernel/sys_rx164.c
arch/alpha/kernel/sys_sable.c
arch/alpha/kernel/sys_takara.c
arch/alpha/kernel/sys_titan.c
arch/alpha/kernel/sys_wildfire.c
arch/arm/include/asm/kmap_types.h
arch/arm/kernel/signal.c
arch/arm/mach-at91/Kconfig
arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
arch/arm/mach-kirkwood/common.c
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
arch/arm/mach-mmp/include/mach/mfp-pxa910.h
arch/arm/mach-omap2/board-zoom2.c
arch/arm/mach-omap2/clock34xx.c
arch/arm/mach-omap2/clock34xx.h
arch/arm/mach-omap2/gpmc.c
arch/arm/mach-pxa/colibri-pxa320.c
arch/arm/mach-pxa/cpufreq-pxa2xx.c
arch/arm/mach-pxa/cpufreq-pxa3xx.c
arch/arm/mach-pxa/hx4700.c
arch/arm/mach-pxa/include/mach/entry-macro.S
arch/arm/mach-pxa/spitz.c
arch/arm/mach-u300/core.c
arch/arm/plat-omap/gpio.c
arch/arm/plat-pxa/include/plat/mfp.h
arch/arm/plat-pxa/mfp.c
arch/arm/tools/mach-types
arch/avr32/include/asm/bug.h
arch/blackfin/kernel/bfin_dma_5xx.c
arch/blackfin/kernel/cplb-mpu/cplbinit.c
arch/blackfin/kernel/process.c
arch/blackfin/kernel/ptrace.c
arch/blackfin/mach-bf518/include/mach/anomaly.h
arch/blackfin/mach-bf527/include/mach/anomaly.h
arch/blackfin/mach-bf533/include/mach/anomaly.h
arch/blackfin/mach-bf537/include/mach/anomaly.h
arch/blackfin/mach-bf538/include/mach/anomaly.h
arch/blackfin/mach-bf548/include/mach/anomaly.h
arch/blackfin/mach-bf561/atomic.S
arch/blackfin/mach-bf561/include/mach/anomaly.h
arch/blackfin/mach-common/arch_checks.c
arch/blackfin/mach-common/smp.c
arch/ia64/include/asm/swiotlb.h
arch/ia64/kernel/pci-swiotlb.c
arch/mips/Kconfig
arch/mips/bcm47xx/prom.c
arch/mips/configs/rbtx49xx_defconfig
arch/mips/include/asm/bug.h
arch/mips/include/asm/dma-mapping.h
arch/mips/include/asm/mman.h
arch/mips/include/asm/system.h
arch/mips/kernel/cevt-smtc.c
arch/mips/kernel/syscall.c
arch/mips/math-emu/cp1emu.c
arch/mips/mm/dma-default.c
arch/mips/mti-malta/malta-memory.c
arch/mips/rb532/devices.c
arch/mips/rb532/prom.c
arch/mips/txx9/generic/setup.c
arch/parisc/include/asm/fcntl.h
arch/parisc/kernel/unwind.c
arch/parisc/kernel/vmlinux.lds.S
arch/powerpc/boot/addRamDisk.c
arch/powerpc/include/asm/kmap_types.h
arch/powerpc/kernel/setup_32.c
arch/powerpc/kernel/setup_64.c
arch/s390/include/asm/bug.h
arch/s390/kernel/early.c
arch/s390/kernel/entry.S
arch/s390/kernel/entry64.S
arch/sh/kernel/cpu/irq/imask.c
arch/sh/kernel/cpu/irq/intc-sh5.c
arch/sparc/boot/btfixupprep.c
arch/sparc/boot/piggyback_32.c
arch/sparc/boot/piggyback_64.c
arch/sparc/mm/init_64.h
arch/x86/include/asm/amd_iommu.h
arch/x86/include/asm/amd_iommu_proto.h [new file with mode: 0644]
arch/x86/include/asm/amd_iommu_types.h
arch/x86/include/asm/bug.h
arch/x86/include/asm/calgary.h
arch/x86/include/asm/device.h
arch/x86/include/asm/dma-mapping.h
arch/x86/include/asm/gart.h
arch/x86/include/asm/iommu.h
arch/x86/include/asm/swiotlb.h
arch/x86/include/asm/x86_init.h
arch/x86/kernel/acpi/processor.c
arch/x86/kernel/amd_iommu.c
arch/x86/kernel/amd_iommu_init.c
arch/x86/kernel/aperture_64.c
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
arch/x86/kernel/cpu/cpufreq/longhaul.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
arch/x86/kernel/crash.c
arch/x86/kernel/pci-calgary_64.c
arch/x86/kernel/pci-dma.c
arch/x86/kernel/pci-gart_64.c
arch/x86/kernel/pci-nommu.c
arch/x86/kernel/pci-swiotlb.c
arch/x86/kernel/reboot.c
arch/x86/kernel/x86_init.c
crypto/async_tx/Kconfig
crypto/async_tx/async_pq.c
crypto/async_tx/async_xor.c
crypto/gcm.c
drivers/acpi/acpica/acpredef.h
drivers/acpi/blacklist.c
drivers/acpi/sleep.c
drivers/ata/pata_pcmcia.c
drivers/ata/sata_fsl.c
drivers/base/power/runtime.c
drivers/block/aoe/aoecmd.c
drivers/block/cciss.c
drivers/bluetooth/bluecard_cs.c
drivers/bluetooth/bt3c_cs.c
drivers/bluetooth/btuart_cs.c
drivers/bluetooth/btusb.c
drivers/bluetooth/dtl1_cs.c
drivers/char/agp/Kconfig
drivers/char/agp/intel-agp.c
drivers/char/keyboard.c
drivers/char/pcmcia/cm4000_cs.c
drivers/char/pcmcia/cm4040_cs.c
drivers/char/pcmcia/ipwireless/hardware.c
drivers/char/pcmcia/ipwireless/main.c
drivers/char/pcmcia/synclink_cs.c
drivers/char/tpm/tpm.c
drivers/char/tpm/tpm_tis.c
drivers/char/tty_port.c
drivers/char/vt_ioctl.c
drivers/cpufreq/cpufreq.c
drivers/cpufreq/cpufreq_conservative.c
drivers/cpufreq/cpufreq_ondemand.c
drivers/crypto/padlock-aes.c
drivers/dma/Kconfig
drivers/dma/dmaengine.c
drivers/dma/ioat/dca.c
drivers/dma/ioat/dma.h
drivers/dma/ioat/dma_v2.c
drivers/dma/ioat/dma_v3.c
drivers/dma/ioat/hw.h
drivers/dma/ioat/registers.h
drivers/dma/shdma.c
drivers/firewire/ohci.c
drivers/gpio/langwell_gpio.c
drivers/gpu/drm/Kconfig
drivers/gpu/drm/drm_edid.c
drivers/gpu/drm/drm_fb_helper.c
drivers/gpu/drm/drm_gem.c
drivers/gpu/drm/drm_mm.c
drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/i915_suspend.c
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_hdmi.c
drivers/gpu/drm/radeon/atom.c
drivers/gpu/drm/radeon/mkregtable.c
drivers/gpu/drm/radeon/radeon.h
drivers/gpu/drm/radeon/radeon_agp.c
drivers/gpu/drm/radeon/radeon_connectors.c
drivers/gpu/drm/radeon/radeon_device.c
drivers/gpu/drm/radeon/rv515.c
drivers/hwmon/adt7475.c
drivers/hwmon/s3c-hwmon.c
drivers/i2c/busses/i2c-pnx.c
drivers/i2c/chips/tsl2550.c
drivers/i2c/i2c-core.c
drivers/ide/ide-cs.c
drivers/ide/ide-ioctls.c
drivers/ieee802154/fakehard.c
drivers/input/ff-core.c
drivers/input/ff-memless.c
drivers/input/input.c
drivers/input/keyboard/atkbd.c
drivers/input/mouse/lifebook.c
drivers/input/mouse/psmouse-base.c
drivers/input/serio/i8042-x86ia64io.h
drivers/isdn/hardware/avm/avm_cs.c
drivers/isdn/hardware/mISDN/hfcmulti.c
drivers/isdn/hisax/avma1_cs.c
drivers/isdn/hisax/elsa_cs.c
drivers/isdn/hisax/sedlbauer_cs.c
drivers/isdn/hisax/teles_cs.c
drivers/isdn/i4l/isdn_ppp.c
drivers/leds/leds-gpio.c
drivers/md/md.c
drivers/md/raid1.c
drivers/md/raid5.c
drivers/media/common/ir-functions.c
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/dvb-usb/cxusb.c
drivers/media/dvb/siano/Kconfig
drivers/media/radio/radio-gemtek-pci.c
drivers/media/video/davinci/vpif_display.c
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/mx1_camera.c
drivers/media/video/mx3_camera.c
drivers/media/video/sh_mobile_ceu_camera.c
drivers/media/video/soc_camera.c
drivers/media/video/videobuf-dma-contig.c
drivers/mfd/wm831x-core.c
drivers/misc/eeprom/at24.c
drivers/mmc/host/pxamci.c
drivers/mtd/maps/pcmciamtd.c
drivers/mtd/maps/sa1100-flash.c
drivers/net/Kconfig
drivers/net/arm/ep93xx_eth.c
drivers/net/au1000_eth.c
drivers/net/b44.c
drivers/net/can/Kconfig
drivers/net/can/dev.c
drivers/net/can/sja1000/Kconfig [new file with mode: 0644]
drivers/net/can/usb/Kconfig [new file with mode: 0644]
drivers/net/can/usb/Makefile
drivers/net/cxgb3/sge.c
drivers/net/davinci_emac.c
drivers/net/e100.c
drivers/net/e1000e/e1000.h
drivers/net/e1000e/ethtool.c
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/netdev.c
drivers/net/e1000e/phy.c
drivers/net/forcedeth.c
drivers/net/ibm_newemac/emac.h
drivers/net/ixgbe/ixgbe_main.c
drivers/net/ks8851_mll.c
drivers/net/macvlan.c
drivers/net/netxen/netxen_nic.h
drivers/net/netxen/netxen_nic_hdr.h
drivers/net/netxen/netxen_nic_hw.c
drivers/net/netxen/netxen_nic_init.c
drivers/net/netxen/netxen_nic_main.c
drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c589_cs.c
drivers/net/pcmcia/axnet_cs.c
drivers/net/pcmcia/com20020_cs.c
drivers/net/pcmcia/fmvj18x_cs.c
drivers/net/pcmcia/ibmtr_cs.c
drivers/net/pcmcia/nmclan_cs.c
drivers/net/pcmcia/pcnet_cs.c
drivers/net/pcmcia/smc91c92_cs.c
drivers/net/pcmcia/xirc2ps_cs.c
drivers/net/phy/mdio-gpio.c
drivers/net/ppp_generic.c
drivers/net/r6040.c
drivers/net/r8169.c
drivers/net/s2io.c
drivers/net/smc91x.c
drivers/net/smsc911x.c
drivers/net/smsc9420.c
drivers/net/stmmac/stmmac_main.c
drivers/net/stmmac/stmmac_timer.c
drivers/net/stmmac/stmmac_timer.h
drivers/net/sungem.c
drivers/net/usb/hso.c
drivers/net/veth.c
drivers/net/wan/cosa.c
drivers/net/wireless/airo_cs.c
drivers/net/wireless/ath/ath5k/base.c
drivers/net/wireless/ath/ath5k/led.c
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/atmel_cs.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/pcmcia.c
drivers/net/wireless/hostap/hostap_cs.c
drivers/net/wireless/ipw2x00/ipw2100.c
drivers/net/wireless/ipw2x00/ipw2200.c
drivers/net/wireless/ipw2x00/libipw.h
drivers/net/wireless/ipw2x00/libipw_module.c
drivers/net/wireless/iwlwifi/iwl-1000.c
drivers/net/wireless/iwlwifi/iwl-6000.c
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/libertas/ethtool.c
drivers/net/wireless/libertas/if_cs.c
drivers/net/wireless/netwave_cs.c
drivers/net/wireless/orinoco/orinoco_cs.c
drivers/net/wireless/orinoco/spectrum_cs.c
drivers/net/wireless/p54/p54usb.c
drivers/net/wireless/ray_cs.c
drivers/net/wireless/rtl818x/rtl8187_rfkill.c
drivers/net/wireless/wavelan_cs.c
drivers/net/wireless/wl3501_cs.c
drivers/parport/parport_cs.c
drivers/pci/dmar.c
drivers/pci/intel-iommu.c
drivers/pcmcia/Kconfig
drivers/pcmcia/Makefile
drivers/pcmcia/cardbus.c
drivers/pcmcia/cirrus.h
drivers/pcmcia/cistpl.c
drivers/pcmcia/cs.c
drivers/pcmcia/cs_internal.h
drivers/pcmcia/ds.c
drivers/pcmcia/i82365.c
drivers/pcmcia/m32r_cfc.c
drivers/pcmcia/m32r_pcc.c
drivers/pcmcia/m8xx_pcmcia.c
drivers/pcmcia/o2micro.h
drivers/pcmcia/pcmcia_ioctl.c
drivers/pcmcia/pcmcia_resource.c
drivers/pcmcia/pd6729.c
drivers/pcmcia/pd6729.h
drivers/pcmcia/pxa2xx_base.c
drivers/pcmcia/pxa2xx_base.h
drivers/pcmcia/pxa2xx_cm_x255.c
drivers/pcmcia/pxa2xx_cm_x270.c
drivers/pcmcia/pxa2xx_e740.c
drivers/pcmcia/pxa2xx_lubbock.c
drivers/pcmcia/pxa2xx_mainstone.c
drivers/pcmcia/pxa2xx_palmld.c
drivers/pcmcia/pxa2xx_palmtx.c
drivers/pcmcia/pxa2xx_sharpsl.c
drivers/pcmcia/pxa2xx_trizeps4.c
drivers/pcmcia/pxa2xx_viper.c
drivers/pcmcia/rsrc_mgr.c
drivers/pcmcia/sa1100_assabet.c
drivers/pcmcia/sa1100_badge4.c
drivers/pcmcia/sa1100_cerf.c
drivers/pcmcia/sa1100_generic.c
drivers/pcmcia/sa1100_h3600.c
drivers/pcmcia/sa1100_jornada720.c
drivers/pcmcia/sa1100_neponset.c
drivers/pcmcia/sa1100_shannon.c
drivers/pcmcia/sa1100_simpad.c
drivers/pcmcia/sa1111_generic.c
drivers/pcmcia/sa1111_generic.h
drivers/pcmcia/sa11xx_base.c
drivers/pcmcia/sa11xx_base.h
drivers/pcmcia/soc_common.c
drivers/pcmcia/soc_common.h
drivers/pcmcia/tcic.c
drivers/pcmcia/topic.h
drivers/platform/x86/acerhdf.c
drivers/platform/x86/thinkpad_acpi.c
drivers/regulator/core.c
drivers/regulator/fixed.c
drivers/regulator/wm831x-isink.c
drivers/regulator/wm831x-ldo.c
drivers/rtc/rtc-coh901331.c
drivers/rtc/rtc-pcf50633.c
drivers/rtc/rtc-x1205.c
drivers/s390/char/monreader.c
drivers/s390/char/sclp_quiesce.c
drivers/scsi/bfa/bfad_fwimg.c
drivers/scsi/bfa/bfad_im.c
drivers/scsi/gdth.c
drivers/scsi/hosts.c
drivers/scsi/ipr.c
drivers/scsi/ipr.h
drivers/scsi/libsas/sas_expander.c
drivers/scsi/pcmcia/aha152x_stub.c
drivers/scsi/pcmcia/fdomain_stub.c
drivers/scsi/pcmcia/nsp_cs.c
drivers/scsi/pcmcia/qlogic_stub.c
drivers/scsi/pcmcia/sym53c500_cs.c
drivers/scsi/pmcraid.c
drivers/scsi/scsi_scan.c
drivers/scsi/scsi_sysfs.c
drivers/scsi/scsi_transport_fc.c
drivers/scsi/sd_dif.c
drivers/serial/bcm63xx_uart.c
drivers/serial/of_serial.c
drivers/serial/serial_cs.c
drivers/serial/suncore.c
drivers/serial/suncore.h
drivers/serial/sunhv.c
drivers/serial/sunsab.c
drivers/serial/sunsu.c
drivers/serial/sunzilog.c
drivers/spi/spi_stmp.c
drivers/spi/spi_txx9.c
drivers/ssb/pcmcia.c
drivers/ssb/scan.c
drivers/staging/comedi/drivers/cb_das16_cs.c
drivers/staging/comedi/drivers/das08_cs.c
drivers/staging/comedi/drivers/ni_daq_700.c
drivers/staging/comedi/drivers/ni_daq_dio24.c
drivers/staging/comedi/drivers/ni_labpc_cs.c
drivers/staging/comedi/drivers/ni_mio_cs.c
drivers/staging/comedi/drivers/quatech_daqp_cs.c
drivers/staging/go7007/s2250-board.c
drivers/staging/go7007/s2250-loader.h [new file with mode: 0644]
drivers/staging/hv/BlkVsc.c
drivers/staging/hv/Channel.c
drivers/staging/hv/ChannelMgmt.c
drivers/staging/hv/NetVsc.c
drivers/staging/hv/NetVsc.h
drivers/staging/hv/StorVsc.c
drivers/staging/hv/blkvsc_drv.c
drivers/staging/hv/netvsc_drv.c
drivers/staging/octeon/ethernet-mdio.c
drivers/staging/octeon/ethernet-spi.c
drivers/staging/octeon/ethernet.c
drivers/staging/rtl8187se/TODO
drivers/staging/rtl8192su/TODO
drivers/staging/vt6655/TODO
drivers/staging/vt6656/TODO
drivers/telephony/ixj_pcmcia.c
drivers/uio/uio_pdrv_genirq.c
drivers/usb/class/cdc-acm.c
drivers/usb/core/hub.c
drivers/usb/gadget/amd5536udc.c
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-pci.c
drivers/usb/host/ehci-q.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci.h
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/ohci-q.c
drivers/usb/host/ohci.h
drivers/usb/host/sl811_cs.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-ring.c
drivers/usb/mon/mon_bin.c
drivers/usb/musb/cppi_dma.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_gadget.c
drivers/usb/musb/musb_gadget_ep0.c
drivers/usb/musb/musb_host.c
drivers/usb/serial/cp210x.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/option.c
drivers/video/backlight/corgi_lcd.c
drivers/video/backlight/lcd.c
drivers/video/da8xx-fb.c
drivers/video/gbefb.c
drivers/watchdog/pnx4008_wdt.c
drivers/watchdog/rc32434_wdt.c
fs/9p/cache.c
fs/afs/file.c
fs/cachefiles/interface.c
fs/cachefiles/namei.c
fs/cachefiles/rdwr.c
fs/cifs/CHANGES
fs/cifs/cifsfs.c
fs/cifs/dir.c
fs/cifs/misc.c
fs/exec.c
fs/fcntl.c
fs/file_table.c
fs/fscache/Kconfig
fs/fscache/Makefile
fs/fscache/cache.c
fs/fscache/cookie.c
fs/fscache/internal.h
fs/fscache/main.c
fs/fscache/object-list.c [new file with mode: 0644]
fs/fscache/object.c
fs/fscache/operation.c
fs/fscache/page.c
fs/fscache/proc.c
fs/fscache/stats.c
fs/fuse/dir.c
fs/gfs2/Kconfig
fs/gfs2/acl.c
fs/gfs2/acl.h
fs/gfs2/aops.c
fs/gfs2/dir.c
fs/gfs2/glock.c
fs/gfs2/glock.h
fs/gfs2/glops.c
fs/gfs2/incore.h
fs/gfs2/inode.c
fs/gfs2/log.c
fs/gfs2/lops.c
fs/gfs2/main.c
fs/gfs2/ops_fstype.c
fs/gfs2/quota.c
fs/gfs2/quota.h
fs/gfs2/recovery.c
fs/gfs2/rgrp.c
fs/gfs2/super.c
fs/gfs2/super.h
fs/gfs2/sys.c
fs/gfs2/xattr.c
fs/gfs2/xattr.h
fs/inode.c
fs/jffs2/read.c
fs/namespace.c
fs/nfs/fscache.c
fs/nfs/nfs4proc.c
fs/nfsd/nfs3xdr.c
fs/nilfs2/cpfile.c
fs/nilfs2/inode.c
fs/nilfs2/ioctl.c
fs/ocfs2/file.c
fs/ocfs2/ocfs2.h
fs/ocfs2/refcounttree.c
fs/ocfs2/super.c
fs/ocfs2/uptodate.c
fs/open.c
fs/proc/array.c
fs/quota/Kconfig
fs/quota/dquot.c
fs/quota/quota.c
fs/xattr_acl.c
fs/xfs/xfs_log_recover.c
fs/xfs/xfs_trans_ail.c
include/asm-generic/fcntl.h
include/linux/Kbuild
include/linux/bootmem.h
include/linux/capability.h
include/linux/compiler-gcc4.h
include/linux/compiler.h
include/linux/dmar.h
include/linux/fscache-cache.h
include/linux/fscache.h
include/linux/gfs2_ondisk.h
include/linux/i2c-pnx.h
include/linux/init_task.h
include/linux/input.h
include/linux/isdn_ppp.h
include/linux/lsm_audit.h
include/linux/mfd/wm831x/regulator.h
include/linux/nilfs2_fs.h
include/linux/pci_ids.h
include/linux/posix_acl.h
include/linux/quota.h
include/linux/securebits.h
include/linux/security.h
include/linux/slow-work.h
include/linux/smp.h
include/linux/suspend.h
include/linux/swiotlb.h
include/linux/tpm.h
include/linux/vt.h
include/net/mac80211.h
include/net/sctp/structs.h
include/pcmcia/cs.h
include/pcmcia/cs_types.h
include/pcmcia/ds.h
include/pcmcia/ss.h
include/scsi/scsi_device.h
include/scsi/scsi_host.h
init/Kconfig
init/main.c
kernel/Makefile
kernel/capability.c
kernel/kmod.c
kernel/module.c
kernel/slow-work-debugfs.c [new file with mode: 0644]
kernel/slow-work.c
kernel/slow-work.h [new file with mode: 0644]
kernel/smp.c
kernel/workqueue.c
lib/radix-tree.c
lib/string.c
lib/swiotlb.c
mm/Kconfig
mm/backing-dev.c
mm/bootmem.c
mm/memory_hotplug.c
mm/mmap.c
mm/percpu.c
net/8021q/vlan.c
net/bluetooth/hci_conn.c
net/bluetooth/l2cap.c
net/core/dev.c
net/core/pktgen.c
net/core/skbuff.c
net/ipv4/ip_fragment.c
net/ipv4/ipmr.c
net/ipv4/tcp.c
net/mac80211/agg-rx.c
net/mac80211/agg-tx.c
net/mac80211/ht.c
net/mac80211/ieee80211_i.h
net/mac80211/util.c
net/netfilter/nf_log.c
net/netfilter/xt_limit.c
net/netfilter/xt_osf.c
net/rfkill/core.c
net/sctp/associola.c
net/sctp/outqueue.c
net/sctp/sm_sideeffect.c
net/sctp/sm_statefuns.c
net/sctp/socket.c
net/sctp/transport.c
net/sunrpc/addr.c
scripts/dtc/data.c
scripts/dtc/dtc-lexer.l
scripts/dtc/dtc-lexer.lex.c_shipped
scripts/dtc/libfdt/fdt_ro.c
scripts/dtc/treesource.c
scripts/genksyms/keywords.c_shipped
scripts/genksyms/keywords.gperf
scripts/kconfig/Makefile
scripts/kconfig/lex.zconf.c_shipped
scripts/kconfig/streamline_config.pl
scripts/kconfig/zconf.gperf
scripts/kconfig/zconf.hash.c_shipped
scripts/kconfig/zconf.l
scripts/kconfig/zconf.tab.c_shipped
scripts/kconfig/zconf.y
scripts/selinux/Makefile
scripts/selinux/genheaders/.gitignore [new file with mode: 0644]
scripts/selinux/genheaders/Makefile [new file with mode: 0644]
scripts/selinux/genheaders/genheaders.c [new file with mode: 0644]
scripts/selinux/mdp/mdp.c
security/Kconfig
security/Makefile
security/capability.c
security/commoncap.c
security/integrity/ima/Kconfig
security/integrity/ima/ima_iint.c
security/lsm_audit.c
security/min_addr.c
security/root_plug.c [deleted file]
security/security.c
security/selinux/.gitignore [new file with mode: 0644]
security/selinux/Makefile
security/selinux/avc.c
security/selinux/hooks.c
security/selinux/include/av_inherit.h [deleted file]
security/selinux/include/av_perm_to_string.h [deleted file]
security/selinux/include/av_permissions.h [deleted file]
security/selinux/include/avc_ss.h
security/selinux/include/class_to_string.h [deleted file]
security/selinux/include/classmap.h [new file with mode: 0644]
security/selinux/include/common_perm_to_string.h [deleted file]
security/selinux/include/flask.h [deleted file]
security/selinux/include/security.h
security/selinux/selinuxfs.c
security/selinux/ss/Makefile
security/selinux/ss/mls.c
security/selinux/ss/policydb.c
security/selinux/ss/policydb.h
security/selinux/ss/services.c
security/tomoyo/common.c
security/tomoyo/common.h
security/tomoyo/realpath.c
sound/arm/aaci.c
sound/oss/hex2hex.c
sound/pci/hda/patch_nvhdmi.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/ice1712/ice1712.h
sound/pci/ice1712/prodigy_hifi.c
sound/pcmcia/pdaudiocf/pdaudiocf.c
sound/pcmcia/vx/vxpocket.c
sound/soc/codecs/tlv320aic23.c
sound/soc/omap/omap3evm.c
sound/soc/omap/omap3pandora.c
sound/soc/soc-dapm.c
sound/usb/usbmixer.c

index b93fb7eff94286c7a15d475fa581dac32a89b0db..946c7ec5c922ff5bb02726144178f56f57c3378d 100644 (file)
@@ -25,6 +25,7 @@
 *.elf
 *.bin
 *.gz
+*.bz2
 *.lzma
 *.patch
 *.gcno
index e1efc400bed66095629a46c2229b5bf863434315..e151b2a36267c17fdb7da317e309bea3de408a4b 100644 (file)
@@ -65,6 +65,7 @@ aicdb.h*
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
+av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
@@ -95,12 +96,14 @@ docproc
 elf2ecoff
 elfconfig.h*
 fixdep
+flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
 gen-devlist
 gen_crc32table
 gen_init_cpio
+genheaders
 genksyms
 *_gray256.c
 ihex2fw
index b3e3a035683993edc8391cefd11ea3ef6be9eb08..fe79e3c8847dc334f479050bb0bc6af5711f868a 100644 (file)
@@ -312,10 +312,8 @@ and to the following documentation:
 8. Mailing list
 ---------------
 
-There are several frame buffer device related mailing lists at SourceForge:
-  - linux-fbdev-announce@lists.sourceforge.net, for announcements,
-  - linux-fbdev-user@lists.sourceforge.net, for generic user support,
-  - linux-fbdev-devel@lists.sourceforge.net, for project developers.
+There is a frame buffer device related mailing list at kernel.org:
+linux-fbdev@vger.kernel.org.
 
 Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for
 subscription information and archive browsing.
index 9e94b9491d89c7bc246865d1b4580d8533fa7549..a91e2e2095b09fcebca6f456fe7e1fe36263006d 100644 (file)
@@ -235,6 +235,7 @@ proc files.
                neg=N   Number of negative lookups made
                pos=N   Number of positive lookups made
                crt=N   Number of objects created by lookup
+               tmo=N   Number of lookups timed out and requeued
        Updates n=N     Number of update cookie requests seen
                nul=N   Number of upd reqs given a NULL parent
                run=N   Number of upd reqs granted CPU time
@@ -250,8 +251,10 @@ proc files.
                ok=N    Number of successful alloc reqs
                wt=N    Number of alloc reqs that waited on lookup completion
                nbf=N   Number of alloc reqs rejected -ENOBUFS
+               int=N   Number of alloc reqs aborted -ERESTARTSYS
                ops=N   Number of alloc reqs submitted
                owt=N   Number of alloc reqs waited for CPU time
+               abt=N   Number of alloc reqs aborted due to object death
        Retrvls n=N     Number of retrieval (read) requests seen
                ok=N    Number of successful retr reqs
                wt=N    Number of retr reqs that waited on lookup completion
@@ -261,6 +264,7 @@ proc files.
                oom=N   Number of retr reqs failed -ENOMEM
                ops=N   Number of retr reqs submitted
                owt=N   Number of retr reqs waited for CPU time
+               abt=N   Number of retr reqs aborted due to object death
        Stores  n=N     Number of storage (write) requests seen
                ok=N    Number of successful store reqs
                agn=N   Number of store reqs on a page already pending storage
@@ -268,12 +272,37 @@ proc files.
                oom=N   Number of store reqs failed -ENOMEM
                ops=N   Number of store reqs submitted
                run=N   Number of store reqs granted CPU time
+               pgs=N   Number of pages given store req processing time
+               rxd=N   Number of store reqs deleted from tracking tree
+               olm=N   Number of store reqs over store limit
+       VmScan  nos=N   Number of release reqs against pages with no pending store
+               gon=N   Number of release reqs against pages stored by time lock granted
+               bsy=N   Number of release reqs ignored due to in-progress store
+               can=N   Number of page stores cancelled due to release req
        Ops     pend=N  Number of times async ops added to pending queues
                run=N   Number of times async ops given CPU time
                enq=N   Number of times async ops queued for processing
+               can=N   Number of async ops cancelled
+               rej=N   Number of async ops rejected due to object lookup/create failure
                dfr=N   Number of async ops queued for deferred release
                rel=N   Number of async ops released
                gc=N    Number of deferred-release async ops garbage collected
+       CacheOp alo=N   Number of in-progress alloc_object() cache ops
+               luo=N   Number of in-progress lookup_object() cache ops
+               luc=N   Number of in-progress lookup_complete() cache ops
+               gro=N   Number of in-progress grab_object() cache ops
+               upo=N   Number of in-progress update_object() cache ops
+               dro=N   Number of in-progress drop_object() cache ops
+               pto=N   Number of in-progress put_object() cache ops
+               syn=N   Number of in-progress sync_cache() cache ops
+               atc=N   Number of in-progress attr_changed() cache ops
+               rap=N   Number of in-progress read_or_alloc_page() cache ops
+               ras=N   Number of in-progress read_or_alloc_pages() cache ops
+               alp=N   Number of in-progress allocate_page() cache ops
+               als=N   Number of in-progress allocate_pages() cache ops
+               wrp=N   Number of in-progress write_page() cache ops
+               ucp=N   Number of in-progress uncache_page() cache ops
+               dsp=N   Number of in-progress dissociate_pages() cache ops
 
 
  (*) /proc/fs/fscache/histogram
@@ -299,6 +328,87 @@ proc files.
      jiffy range covered, and the SECS field the equivalent number of seconds.
 
 
+===========
+OBJECT LIST
+===========
+
+If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a
+list of all the objects currently allocated and allow them to be viewed
+through:
+
+       /proc/fs/fscache/objects
+
+This will look something like:
+
+       [root@andromeda ~]# head /proc/fs/fscache/objects
+       OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
+       ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
+          17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+          1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+
+where the first set of columns before the '|' describe the object:
+
+       COLUMN  DESCRIPTION
+       ======= ===============================================================
+       OBJECT  Object debugging ID (appears as OBJ%x in some debug messages)
+       PARENT  Debugging ID of parent object
+       STAT    Object state
+       CHLDN   Number of child objects of this object
+       OPS     Number of outstanding operations on this object
+       OOP     Number of outstanding child object management operations
+       IPR
+       EX      Number of outstanding exclusive operations
+       READS   Number of outstanding read operations
+       EM      Object's event mask
+       EV      Events raised on this object
+       F       Object flags
+       S       Object slow-work work item flags
+
+and the second set of columns describe the object's cookie, if present:
+
+       COLUMN          DESCRIPTION
+       =============== =======================================================
+       NETFS_COOKIE_DEF Name of netfs cookie definition
+       TY              Cookie type (IX - index, DT - data, hex - special)
+       FL              Cookie flags
+       NETFS_DATA      Netfs private data stored in the cookie
+       OBJECT_KEY      Object key      } 1 column, with separating comma
+       AUX_DATA        Object aux data } presence may be configured
+
+The data shown may be filtered by attaching the a key to an appropriate keyring
+before viewing the file.  Something like:
+
+               keyctl add user fscache:objlist <restrictions> @s
+
+where <restrictions> are a selection of the following letters:
+
+       K       Show hexdump of object key (don't show if not given)
+       A       Show hexdump of object aux data (don't show if not given)
+
+and the following paired letters:
+
+       C       Show objects that have a cookie
+       c       Show objects that don't have a cookie
+       B       Show objects that are busy
+       b       Show objects that aren't busy
+       W       Show objects that have pending writes
+       w       Show objects that don't have pending writes
+       R       Show objects that have outstanding reads
+       r       Show objects that don't have outstanding reads
+       S       Show objects that have slow work queued
+       s       Show objects that don't have slow work queued
+
+If neither side of a letter pair is given, then both are implied.  For example:
+
+       keyctl add user fscache:objlist KB @s
+
+shows objects that are busy, and lists their object keys, but does not dump
+their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
+not implied.
+
+By default all objects and all fields will be shown.
+
+
 =========
 DEBUGGING
 =========
index 2666b1ed5e9e6515cdda71c878f846438167a0b1..1902c57b72ef7e103a07856dd520aef772c1e684 100644 (file)
@@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below).
 
 Furthermore, note that this does not cancel the asynchronous read or write
 operation started by the read/alloc and write functions, so the page
-invalidation and release functions must use:
+invalidation functions must use:
 
        bool fscache_check_page_write(struct fscache_cookie *cookie,
                                      struct page *page);
@@ -654,6 +654,25 @@ to see if a page is being written to the cache, and:
 to wait for it to finish if it is.
 
 
+When releasepage() is being implemented, a special FS-Cache function exists to
+manage the heuristics of coping with vmscan trying to eject pages, which may
+conflict with the cache trying to write pages to the cache (which may itself
+need to allocate memory):
+
+       bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+                                       struct page *page,
+                                       gfp_t gfp);
+
+This takes the netfs cookie, and the page and gfp arguments as supplied to
+releasepage().  It will return false if the page cannot be released yet for
+some reason and if it returns true, the page has been uncached and can now be
+released.
+
+To make a page available for release, this function may wait for an outstanding
+storage request to complete, or it may attempt to cancel the storage request -
+in which case the page will not be stored in the cache this time.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================
index c2a0871280a02eeaa6c027300207881b4a8825cf..c58b9f5ba002a4bdfb8b0ef2aefb30d08160bf53 100644 (file)
@@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects.
 Authors in alphabetical order:
 Joel Becker   <joel.becker@oracle.com>
 Zach Brown    <zach.brown@oracle.com>
-Mark Fasheh   <mark.fasheh@oracle.com>
+Mark Fasheh   <mfasheh@suse.com>
 Kurt Hackel   <kurt.hackel@oracle.com>
+Tao Ma        <tao.ma@oracle.com>
 Sunil Mushran <sunil.mushran@oracle.com>
 Manish Singh  <manish.singh@oracle.com>
+Tiger Yang    <tiger.yang@oracle.com>
 
 Caveats
 =======
 Features which OCFS2 does not support yet:
-       - quotas
        - Directory change notification (F_NOTIFY)
        - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 
@@ -70,7 +71,6 @@ commit=nrsec  (*)     Ocfs2 can be told to sync all its data and metadata
                        performance.
 localalloc=8(*)                Allows custom localalloc size in MB. If the value is too
                        large, the fs will silently revert it to the default.
-                       Localalloc is not enabled for local mounts.
 localflocks            This disables cluster aware flock.
 inode64                        Indicates that Ocfs2 is allowed to create inodes at
                        any location in the filesystem, including those which
index 9107b387e91fce095ee320dbeed53d5dfe5cb332..332fe3b47e0c9a2a98e861c17ef5dcba90c6cc50 100644 (file)
@@ -85,7 +85,6 @@ parameter is applicable:
        PPT     Parallel port support is enabled.
        PS2     Appropriate PS/2 support is enabled.
        RAM     RAM disk support is enabled.
-       ROOTPLUG The example Root Plug LSM is enabled.
        S390    S390 architecture is enabled.
        SCSI    Appropriate SCSI support is enabled.
                        A lot of drivers has their options described inside of
@@ -2164,15 +2163,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        Useful for devices that are detected asynchronously
                        (e.g. USB and MMC devices).
 
-       root_plug.vendor_id=
-                       [ROOTPLUG] Override the default vendor ID
-
-       root_plug.product_id=
-                       [ROOTPLUG] Override the default product ID
-
-       root_plug.debug=
-                       [ROOTPLUG] Enable debugging output
-
        rw              [KNL] Mount root device read-write on boot
 
        S               [KNL] Run init in single mode
index 059934363cafaf18a15ebff592e167f8c84ee539..446f43b309dfea887937c8059634cc1b8f7642d8 100644 (file)
@@ -1,5 +1,17 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
 * New configuration loop helper (as of 2.6.28)
    By calling pcmcia_loop_config(), a driver can iterate over all available
    configuration options. During a driver's probe() phase, one doesn't need
index ebc50f808ea4b6774992ff340a4de9c5492c8135..9dbf4470c7e16df9530591cfdc7fbf401ff23a2f 100644 (file)
@@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long.
 Operations of both types may sleep during execution, thus tying up the thread
 loaned to it.
 
+A further class of work item is available, based on the slow work item class:
+
+ (*) Delayed slow work items.
+
+These are slow work items that have a timer to defer queueing of the item for
+a while.
+
 
 THREAD-TO-CLASS ALLOCATION
 --------------------------
@@ -64,9 +71,11 @@ USING SLOW WORK ITEMS
 Firstly, a module or subsystem wanting to make use of slow work items must
 register its interest:
 
-        int ret = slow_work_register_user();
+        int ret = slow_work_register_user(struct module *module);
 
-This will return 0 if successful, or a -ve error upon failure.
+This will return 0 if successful, or a -ve error upon failure.  The module
+pointer should be the module interested in using this facility (almost
+certainly THIS_MODULE).
 
 
 Slow work items may then be set up by:
@@ -91,6 +100,10 @@ Slow work items may then be set up by:
 
        slow_work_init(&myitem, &myitem_ops);
 
+     or:
+
+       delayed_slow_work_init(&myitem, &myitem_ops);
+
      or:
 
        vslow_work_init(&myitem, &myitem_ops);
@@ -102,15 +115,92 @@ A suitably set up work item can then be enqueued for processing:
        int ret = slow_work_enqueue(&myitem);
 
 This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise.
+on the item, 0 otherwise, or (for delayed work):
+
+       int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
 
 
 The items are reference counted, so there ought to be no need for a flush
-operation.  When all a module's slow work items have been processed, and the
+operation.  But as the reference counting is optional, means to cancel
+existing work items are also included:
+
+       cancel_slow_work(&myitem);
+       cancel_delayed_slow_work(&myitem);
+
+can be used to cancel pending work.  The above cancel function waits for
+existing work to have been executed (or prevent execution of them, depending
+on timing).
+
+
+When all a module's slow work items have been processed, and the
 module has no further interest in the facility, it should unregister its
 interest:
 
-       slow_work_unregister_user();
+       slow_work_unregister_user(struct module *module);
+
+The module pointer is used to wait for all outstanding work items for that
+module before completing the unregistration.  This prevents the put_ref() code
+from being taken away before it completes.  module should almost certainly be
+THIS_MODULE.
+
+
+================
+HELPER FUNCTIONS
+================
+
+The slow-work facility provides a function by which it can be determined
+whether or not an item is queued for later execution:
+
+       bool queued = slow_work_is_queued(struct slow_work *work);
+
+If it returns false, then the item is not on the queue (it may be executing
+with a requeue pending).  This can be used to work out whether an item on which
+another depends is on the queue, thus allowing a dependent item to be queued
+after it.
+
+If the above shows an item on which another depends not to be queued, then the
+owner of the dependent item might need to wait.  However, to avoid locking up
+the threads unnecessarily be sleeping in them, it can make sense under some
+circumstances to return the work item to the queue, thus deferring it until
+some other items have had a chance to make use of the yielded thread.
+
+To yield a thread and defer an item, the work function should simply enqueue
+the work item again and return.  However, this doesn't work if there's nothing
+actually on the queue, as the thread just vacated will jump straight back into
+the item's work function, thus busy waiting on a CPU.
+
+Instead, the item should use the thread to wait for the dependency to go away,
+but rather than using schedule() or schedule_timeout() to sleep, it should use
+the following function:
+
+       bool requeue = slow_work_sleep_till_thread_needed(
+                       struct slow_work *work,
+                       signed long *_timeout);
+
+This will add a second wait and then sleep, such that it will be woken up if
+either something appears on the queue that could usefully make use of the
+thread - and behind which this item can be queued, or if the event the caller
+set up to wait for happens.  True will be returned if something else appeared
+on the queue and this work function should perhaps return, of false if
+something else woke it up.  The timeout is as for schedule_timeout().
+
+For example:
+
+       wq = bit_waitqueue(&my_flags, MY_BIT);
+       init_wait(&wait);
+       requeue = false;
+       do {
+               prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+               if (!test_bit(MY_BIT, &my_flags))
+                       break;
+               requeue = slow_work_sleep_till_thread_needed(&my_work,
+                                                            &timeout);
+       } while (timeout > 0 && !requeue);
+       finish_wait(wq, &wait);
+       if (!test_bit(MY_BIT, &my_flags)
+               goto do_my_thing;
+       if (requeue)
+               return; // to slow_work
 
 
 ===============
@@ -118,7 +208,8 @@ ITEM OPERATIONS
 ===============
 
 Each work item requires a table of operations of type struct slow_work_ops.
-All members are required:
+Only ->execute() is required; the getting and putting of a reference and the
+describing of an item are all optional.
 
  (*) Get a reference on an item:
 
@@ -148,6 +239,16 @@ All members are required:
      This should perform the work required of the item.  It may sleep, it may
      perform disk I/O and it may wait for locks.
 
+ (*) View an item through /proc:
+
+       void (*desc)(struct slow_work *work, struct seq_file *m);
+
+     If supplied, this should print to 'm' a small string describing the work
+     the item is to do.  This should be no more than about 40 characters, and
+     shouldn't include a newline character.
+
+     See the 'Viewing executing and queued items' section below.
+
 
 ==================
 POOL CONFIGURATION
@@ -172,3 +273,50 @@ The slow-work thread pool has a number of configurables:
      is bounded to between 1 and one fewer than the number of active threads.
      This ensures there is always at least one thread that can process very
      slow work items, and always at least one thread that won't.
+
+
+==================================
+VIEWING EXECUTING AND QUEUED ITEMS
+==================================
+
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
+
+       /sys/kernel/debug/slow_work/runqueue
+
+through which the list of work items being executed and the queues of items to
+be executed may be viewed.  The owner of a work item is given the chance to
+add some information of its own.
+
+The contents look something like the following:
+
+    THR PID   ITEM ADDR        FL MARK  DESC
+    === ===== ================ == ===== ==========
+      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
+      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
+      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
+      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
+      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
+      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
+      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
+      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
+    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
+    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
+    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
+    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
+    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
+    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
+    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
+    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
+    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
+    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
+    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
+    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
+    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
+    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
+
+In the 'THR' column, executing items show the thread they're occupying and
+queued threads indicate which queue they're on.  'PID' shows the process ID of
+a slow-work thread that's executing something.  'FL' shows the work item flags.
+'MARK' indicates how long since an item was queued or began executing.  Lastly,
+the 'DESC' column permits the owner of an item to give some information.
+
index 3ec4f2a2258537a80b77f1ca341b1df03ded6ae8..4793c6aac73343e580a98de57b1b014c87165a08 100644 (file)
@@ -218,7 +218,7 @@ static void fatal(const char *x, ...)
        exit(EXIT_FAILURE);
 }
 
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
 {
        int fd = open(pathname, flags);
 
index 81d68d5b7eea0c172c6fce0cd5bd4abcd32ac75a..4f96ac81089c545e9f2346bc53c2dc65ae9c9315 100644 (file)
@@ -512,10 +512,32 @@ W:        http://www.arm.linux.org.uk/
 S:     Maintained
 F:     arch/arm/
 
+ARM PRIMECELL AACI PL041 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     sound/arm/aaci.*
+
+ARM PRIMECELL CLCD PL110 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/video/amba-clcd.*
+
+ARM PRIMECELL KMI PL050 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/input/serio/ambakmi.*
+F:     include/linux/amba/kmi.h
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:     Orphan
 F:     drivers/mmc/host/mmci.*
 
+ARM PRIMECELL BUS SUPPORT
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/amba/
+F:     include/linux/amba/bus.h
+
 ARM/ADI ROADRUNNER MACHINE SUPPORT
 M:     Lennert Buytenhek <kernel@wantstofly.org>
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1027,7 +1049,7 @@ F:        drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
 M:     Nicolas Ferre <nicolas.ferre@atmel.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/atmel_lcdfb.c
 F:     include/video/atmel_lcdc.h
@@ -2113,7 +2135,7 @@ F:        drivers/net/wan/dlci.c
 F:     drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 W:     http://linux-fbdev.sourceforge.net/
 S:     Orphan
 F:     Documentation/fb/
@@ -2136,7 +2158,7 @@ F:        drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
 M:     Sascha Hauer <kernel@pengutronix.de>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:     Maintained
 F:     arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2312,6 +2334,13 @@ T:       git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:     Maintained
 F:     drivers/media/video/gspca/finepix.c
 
+GSPCA GL860 SUBDRIVER
+M:     Olivier Lorin <o.lorin@laposte.net>
+L:     linux-media@vger.kernel.org
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:     Maintained
+F:     drivers/media/video/gspca/gl860/
+
 GSPCA M5602 SUBDRIVER
 M:     Erik Andren <erik.andren@gmail.com>
 L:     linux-media@vger.kernel.org
@@ -2533,8 +2562,7 @@ S:        Maintained
 F:     Documentation/i2c/
 F:     drivers/i2c/
 F:     include/linux/i2c.h
-F:     include/linux/i2c-dev.h
-F:     include/linux/i2c-id.h
+F:     include/linux/i2c-*.h
 
 I2C-TINY-USB DRIVER
 M:     Till Harbaum <till@harbaum.org>
@@ -2635,7 +2663,7 @@ S:        Supported
 F:     security/integrity/ima/
 
 IMS TWINTURBO FRAMEBUFFER DRIVER
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Orphan
 F:     drivers/video/imsttfb.c
 
@@ -2670,14 +2698,14 @@ F:      drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
 M:     Sylvain Meyer <sylvain.meyer@worldonline.fr>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     Documentation/fb/intelfb.txt
 F:     drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/i810/
 
@@ -2987,11 +3015,8 @@ S:       Maintained
 F:     fs/autofs4/
 
 KERNEL BUILD
-M:     Sam Ravnborg <sam@ravnborg.org>
-T:     git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
-T:     git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:     linux-kbuild@vger.kernel.org
-S:     Maintained
+S:     Orphan
 F:     Documentation/kbuild/
 F:     Makefile
 F:     scripts/Makefile.*
@@ -3084,9 +3109,13 @@ F:       kernel/kgdb.c
 
 KMEMCHECK
 M:     Vegard Nossum <vegardno@ifi.uio.no>
-P      Pekka Enberg
-M:     penberg@cs.helsinki.fi
+M:     Pekka Enberg <penberg@cs.helsinki.fi>
 S:     Maintained
+F:     Documentation/kmemcheck.txt
+F:     arch/x86/include/asm/kmemcheck.h
+F:     arch/x86/mm/kmemcheck/
+F:     include/linux/kmemcheck.h
+F:     mm/kmemcheck.c
 
 KMEMLEAK
 M:     Catalin Marinas <catalin.marinas@arm.com>
@@ -3387,7 +3416,7 @@ S:        Supported
 
 MATROX FRAMEBUFFER DRIVER
 M:     Petr Vandrovec <vandrove@vc.cvut.cz>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/matrox/matroxfb_*
 F:     include/linux/matroxfb.h
@@ -3774,7 +3803,7 @@ F:        fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/riva/
 F:     drivers/video/nvidia/
@@ -3809,7 +3838,7 @@ F:        sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
 M:     Imre Deak <imre.deak@nokia.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 L:     linux-omap@vger.kernel.org
 S:     Maintained
 F:     drivers/video/omap/
@@ -4315,19 +4344,21 @@ F:      include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
 M:     Benjamin Herrenschmidt <benh@kernel.crashing.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/aty/radeon*
 F:     include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
 M:     Paul Mackerras <paulus@samba.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/aty/aty128fb.c
 
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:     rt2x00 project
+M:     Ivo van Doorn <IvDoorn@gmail.com>
+M:     Gertjan van Wingerde <gwingerde@gmail.com>
 L:     linux-wireless@vger.kernel.org
 L:     users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:     http://rt2x00.serialmonkey.com/
@@ -4415,7 +4446,7 @@ RFKILL
 M:     Johannes Berg <johannes@sipsolutions.net>
 L:     linux-wireless@vger.kernel.org
 S:     Maintained
-F      Documentation/rfkill.txt
+F:     Documentation/rfkill.txt
 F:     net/rfkill/
 
 RISCOM8 DRIVER
@@ -4459,7 +4490,7 @@ F:        drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/savage/
 
@@ -5622,7 +5653,7 @@ S:        Maintained
 
 UVESAFB DRIVER
 M:     Michal Januszewski <spock@gentoo.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 W:     http://dev.gentoo.org/~spock/projects/uvesafb/
 S:     Maintained
 F:     Documentation/fb/uvesafb.txt
@@ -5655,7 +5686,7 @@ F:        drivers/mmc/host/via-sdmmc.c
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 M:     Joseph Chan <JosephChan@via.com.tw>
 M:     Scott Fang <ScottFang@viatech.com.cn>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/via/
 
index 8278361281588a802accd4d1e8a94cb0e34de851..f5cdb72ba2cef1e896e0ac87bba43cd940361399 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 HOSTCXXFLAGS = -O2
 
 # Decide whether to build built-in, modular, or both.
index 9d0727d18aeeb82f6a1920f0ba3fc2bb1775e5cc..367d53d031fc04d51af471273a0256a5a08432c7 100644 (file)
@@ -35,7 +35,7 @@
 const char * prog_name;
 
 
-void
+static void
 usage (void)
 {
     fprintf(stderr,
index 73126e4dd639416df233d0ca5f134049b2fd6f70..25da0017ec87fb2dd675257d7d16a68cc5f89aff 100644 (file)
@@ -26,8 +26,6 @@
 #define F_GETOWN       6       /*  for sockets. */
 #define F_SETSIG       10      /*  for sockets. */
 #define F_GETSIG       11      /*  for sockets. */
-#define F_SETOWN_EX    15
-#define F_GETOWN_EX    16
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK                1
index 815680b585ed2d15e766384b1401dd67f5e138d9..b3e888638bb7c819547cba13e5ec48724d596cd1 100644 (file)
@@ -61,21 +61,24 @@ register struct thread_info *__current_thread_info __asm__("$8");
 /*
  * Thread information flags:
  * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
+ * - pending work-to-be-done flags come first and must be assigned to be
+ *   within bits 0 to 7 to fit in and immediate operand.
+ * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
+ *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
 #define TIF_SYSCALL_TRACE      0       /* syscall trace active */
-#define TIF_SIGPENDING         1       /* signal pending */
-#define TIF_NEED_RESCHED       2       /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG     3       /* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL      4       /* dik recursion lock */
-#define TIF_UAC_NOPRINT                5       /* see sysinfo.h */
-#define TIF_UAC_NOFIX          6
-#define TIF_UAC_SIGBUS         7
-#define TIF_MEMDIE             8
-#define TIF_RESTORE_SIGMASK    9       /* restore signal mask in do_signal */
-#define TIF_NOTIFY_RESUME      10      /* callback before returning to user */
+#define TIF_NOTIFY_RESUME      1       /* callback before returning to user */
+#define TIF_SIGPENDING         2       /* signal pending */
+#define TIF_NEED_RESCHED       3       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG     8       /* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL      9       /* dik recursion lock */
+#define TIF_UAC_NOPRINT                10      /* see sysinfo.h */
+#define TIF_UAC_NOFIX          11
+#define TIF_UAC_SIGBUS         12
+#define TIF_MEMDIE             13
+#define TIF_RESTORE_SIGMASK    14      /* restore signal mask in do_signal */
 #define TIF_FREEZE             16      /* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE     (1<<TIF_SYSCALL_TRACE)
@@ -94,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_ALLWORK_MASK      (_TIF_WORK_MASK         \
                                 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT                6
+#define ALPHA_UAC_SHIFT                10
 #define ALPHA_UAC_MASK         (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
                                 1 << TIF_UAC_SIGBUS)
 
index 8e059e58b0acd6eba4aace468da92dd0090e5008..53dd2f1a53aabd25f188053e2e78fb9510d45d75 100644 (file)
@@ -1103,6 +1103,8 @@ marvel_agp_info(void)
         * Allocate the info structure.
         */
        agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+       if (!agp)
+               return NULL;
 
        /*
         * Fill it in.
index 76686497b1e210992fcf0ee51fd86ed800e5dd14..219bf271c0ba2e5f2d668af707df57fbbd00ccfd 100644 (file)
@@ -757,6 +757,8 @@ titan_agp_info(void)
         * Allocate the info structure.
         */
        agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+       if (!agp)
+               return NULL;
 
        /*
         * Fill it in.
index cc783466142754b97475522de5fd39aaa5b85f37..c0de072b8305bab3c507b96f92da2536aab9667c 100644 (file)
@@ -92,7 +92,7 @@ show_interrupts(struct seq_file *p, void *v)
                for_each_online_cpu(j)
                        seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
 #endif
-               seq_printf(p, " %14s", irq_desc[irq].chip->typename);
+               seq_printf(p, " %14s", irq_desc[irq].chip->name);
                seq_printf(p, "  %c%s",
                        (action->flags & IRQF_DISABLED)?'+':' ',
                        action->name);
index 38c805dfc5445dd02ba8683d6c538d9daf4c8822..cfde865b78e05f9c02c89d174887e38ef12590b2 100644 (file)
@@ -228,7 +228,7 @@ struct irqaction timer_irqaction = {
 };
 
 static struct irq_chip rtc_irq_type = {
-       .typename       = "RTC",
+       .name           = "RTC",
        .startup        = rtc_startup,
        .shutdown       = rtc_enable_disable,
        .enable         = rtc_enable_disable,
index 50bfec9b588ffbc8ba4d08a47c532bf5f0de7299..83a9ac2808908cf49e2014bf1960e4cdb95afc95 100644 (file)
@@ -84,7 +84,7 @@ i8259a_end_irq(unsigned int irq)
 }
 
 struct irq_chip i8259a_irq_type = {
-       .typename       = "XT-PIC",
+       .name           = "XT-PIC",
        .startup        = i8259a_startup_irq,
        .shutdown       = i8259a_disable_irq,
        .enable         = i8259a_enable_irq,
index 69199a76ec4a41f6d165f66a56738a5b048340bd..989ce46a0cf3392e22d57f36fe23c8ab1752d5d6 100644 (file)
@@ -71,7 +71,7 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip pyxis_irq_type = {
-       .typename       = "PYXIS",
+       .name           = "PYXIS",
        .startup        = pyxis_startup_irq,
        .shutdown       = pyxis_disable_irq,
        .enable         = pyxis_enable_irq,
index 85229369a1f8bfa31e7e326f1e0bc42020550a75..d63e93e1e8bf885295a26e4ec154c836a96c3d64 100644 (file)
@@ -49,7 +49,7 @@ srm_end_irq(unsigned int irq)
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
 static struct irq_chip srm_irq_type = {
-       .typename       = "SRM",
+       .name           = "SRM",
        .startup        = srm_startup_irq,
        .shutdown       = srm_disable_irq,
        .enable         = srm_enable_irq,
index 382035ef7394666e20f7a4b9c821f2f71051e800..20a30b8b96559e888223d16e60dec6bad9347297 100644 (file)
@@ -90,7 +90,7 @@ alcor_end_irq(unsigned int irq)
 }
 
 static struct irq_chip alcor_irq_type = {
-       .typename       = "ALCOR",
+       .name           = "ALCOR",
        .startup        = alcor_startup_irq,
        .shutdown       = alcor_disable_irq,
        .enable         = alcor_enable_irq,
index ed349436732ba2ded473fc8c65776b422cb77b09..affd0f3f25df09b147c4a1e06146ff2f57e550ce 100644 (file)
@@ -72,7 +72,7 @@ cabriolet_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cabriolet_irq_type = {
-       .typename       = "CABRIOLET",
+       .name           = "CABRIOLET",
        .startup        = cabriolet_startup_irq,
        .shutdown       = cabriolet_disable_irq,
        .enable         = cabriolet_enable_irq,
index 46e70ece5176ec1372e26dc09072759b26de5c43..d64e1e497e76a1edd304d4036f3f1d7a5a41c83a 100644 (file)
@@ -199,7 +199,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 }
 
 static struct irq_chip dp264_irq_type = {
-       .typename       = "DP264",
+       .name           = "DP264",
        .startup        = dp264_startup_irq,
        .shutdown       = dp264_disable_irq,
        .enable         = dp264_enable_irq,
@@ -210,7 +210,7 @@ static struct irq_chip dp264_irq_type = {
 };
 
 static struct irq_chip clipper_irq_type = {
-       .typename       = "CLIPPER",
+       .name           = "CLIPPER",
        .startup        = clipper_startup_irq,
        .shutdown       = clipper_disable_irq,
        .enable         = clipper_enable_irq,
index 660c23ef661f686bfbb7c6e2fe382ad3eb8b3478..df2090ce5e7f622b4bececed8ee38cfc0e2b558b 100644 (file)
@@ -70,7 +70,7 @@ eb64p_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eb64p_irq_type = {
-       .typename       = "EB64P",
+       .name           = "EB64P",
        .startup        = eb64p_startup_irq,
        .shutdown       = eb64p_disable_irq,
        .enable         = eb64p_enable_irq,
index b99ea488d8446139d4fabdaa53dbeeedf51446eb..3ca1dbcf404477deb345277541df0b93f9776957 100644 (file)
@@ -81,7 +81,7 @@ eiger_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eiger_irq_type = {
-       .typename       = "EIGER",
+       .name           = "EIGER",
        .startup        = eiger_startup_irq,
        .shutdown       = eiger_disable_irq,
        .enable         = eiger_enable_irq,
index ef0b83a070accb165129291fb58b2bfa19f748e7..7a7ae36fff913d22448687188c4c56536f2b96ae 100644 (file)
@@ -119,7 +119,7 @@ jensen_local_end(unsigned int irq)
 }
 
 static struct irq_chip jensen_local_irq_type = {
-       .typename       = "LOCAL",
+       .name           = "LOCAL",
        .startup        = jensen_local_startup,
        .shutdown       = jensen_local_shutdown,
        .enable         = jensen_local_enable,
index bbfc4f20ca72a2ed9f6e0ac2c3172fc81f8c33d1..0bb3b5c4f69377c3d146237ef50786ee78b56aae 100644 (file)
@@ -170,7 +170,7 @@ marvel_irq_noop_return(unsigned int irq)
 }
 
 static struct irq_chip marvel_legacy_irq_type = {
-       .typename       = "LEGACY",
+       .name           = "LEGACY",
        .startup        = marvel_irq_noop_return,
        .shutdown       = marvel_irq_noop,
        .enable         = marvel_irq_noop,
@@ -180,7 +180,7 @@ static struct irq_chip marvel_legacy_irq_type = {
 };
 
 static struct irq_chip io7_lsi_irq_type = {
-       .typename       = "LSI",
+       .name           = "LSI",
        .startup        = io7_startup_irq,
        .shutdown       = io7_disable_irq,
        .enable         = io7_enable_irq,
@@ -190,7 +190,7 @@ static struct irq_chip io7_lsi_irq_type = {
 };
 
 static struct irq_chip io7_msi_irq_type = {
-       .typename       = "MSI",
+       .name           = "MSI",
        .startup        = io7_startup_irq,
        .shutdown       = io7_disable_irq,
        .enable         = io7_enable_irq,
index 4e366641a08ed20c4f6cba1755f2e9082216a5df..ee88651698110e335dbe644c51ce47601ea3e5f2 100644 (file)
@@ -69,7 +69,7 @@ mikasa_end_irq(unsigned int irq)
 }
 
 static struct irq_chip mikasa_irq_type = {
-       .typename       = "MIKASA",
+       .name           = "MIKASA",
        .startup        = mikasa_startup_irq,
        .shutdown       = mikasa_disable_irq,
        .enable         = mikasa_enable_irq,
index 35753a173bac3073305d8c8a18156d5e7b90840a..86503fe73a8804444d52098d51bb1cd5b787aa85 100644 (file)
@@ -74,7 +74,7 @@ noritake_end_irq(unsigned int irq)
 }
 
 static struct irq_chip noritake_irq_type = {
-       .typename       = "NORITAKE",
+       .name           = "NORITAKE",
        .startup        = noritake_startup_irq,
        .shutdown       = noritake_disable_irq,
        .enable         = noritake_enable_irq,
index f3aec7e085c8c6f0a0165a7f47af0fe076312377..26c322bf89ee195a81863c8a4b42418991c6513f 100644 (file)
@@ -136,7 +136,7 @@ rawhide_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rawhide_irq_type = {
-       .typename       = "RAWHIDE",
+       .name           = "RAWHIDE",
        .startup        = rawhide_startup_irq,
        .shutdown       = rawhide_disable_irq,
        .enable         = rawhide_enable_irq,
index d9f9cfeb9931354cee9d6df304877941ef13ecea..8de1046fe91e7f635decef2e2b08aa8d003977ca 100644 (file)
@@ -66,7 +66,7 @@ ruffian_init_irq(void)
        common_init_isa_dma();
 }
 
-#define RUFFIAN_LATCH  ((PIT_TICK_RATE + HZ / 2) / HZ)
+#define RUFFIAN_LATCH  DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
 
 static void __init
 ruffian_init_rtc(void)
index fc9246373452896439e58c01c8c595a1771c7d63..be161129eab996b0225adc4c73bd1d33ac55e794 100644 (file)
@@ -73,7 +73,7 @@ rx164_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rx164_irq_type = {
-       .typename       = "RX164",
+       .name           = "RX164",
        .startup        = rx164_startup_irq,
        .shutdown       = rx164_disable_irq,
        .enable         = rx164_enable_irq,
index 426eb6906d0192a96872aa5697d2a0fc3bcb57a8..b2abe27a23cff2ad2164f9827efb938e395ce84f 100644 (file)
@@ -502,7 +502,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip sable_lynx_irq_type = {
-       .typename       = "SABLE/LYNX",
+       .name           = "SABLE/LYNX",
        .startup        = sable_lynx_startup_irq,
        .shutdown       = sable_lynx_disable_irq,
        .enable         = sable_lynx_enable_irq,
index 830318c21661dba4f36b2443e90686a7e4689d5b..230464885b5cbe1a7683a2c76acdf1e46fbb9bac 100644 (file)
@@ -75,7 +75,7 @@ takara_end_irq(unsigned int irq)
 }
 
 static struct irq_chip takara_irq_type = {
-       .typename       = "TAKARA",
+       .name           = "TAKARA",
        .startup        = takara_startup_irq,
        .shutdown       = takara_disable_irq,
        .enable         = takara_enable_irq,
index 88978fc60f835061b35746d8623b6713606a559b..288053342c83b5e951df1e4a68eb81ba2bd3ad62 100644 (file)
@@ -195,7 +195,7 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax)
 }
 
 static struct irq_chip titan_irq_type = {
-       .typename       = "TITAN",
+       .name          = "TITAN",
        .startup        = titan_startup_irq,
        .shutdown       = titan_disable_irq,
        .enable         = titan_enable_irq,
index e91b4c3838a8d3e5f21f4e5aa01d7135014fbe14..62fd972e18efcd42156fc3734ce15a2f1edc5819 100644 (file)
@@ -158,7 +158,7 @@ wildfire_end_irq(unsigned int irq)
 }
 
 static struct irq_chip wildfire_irq_type = {
-       .typename       = "WILDFIRE",
+       .name           = "WILDFIRE",
        .startup        = wildfire_startup_irq,
        .shutdown       = wildfire_disable_irq,
        .enable         = wildfire_enable_irq,
index d16ec97ec9a9948fbb7de727164a006bfe6eeae7..c019949a5189dc725a937006eb8445c18d0ad2ef 100644 (file)
@@ -22,4 +22,10 @@ enum km_type {
        KM_TYPE_NR
 };
 
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI         (-1)
+#define KM_NMI_PTE     (-1)
+#define KM_IRQ_PTE     (-1)
+#endif
+
 #endif
index 2a573d4fea24a7ab12873282ad5c805a4c0e8de1..e7714f367eb83aa0a4b0224e5129ec94c87c3391 100644 (file)
@@ -662,8 +662,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
                                regs->ARM_sp -= 4;
                                usp = (u32 __user *)regs->ARM_sp;
 
-                               put_user(regs->ARM_pc, usp);
-                               regs->ARM_pc = KERN_RESTART_CODE;
+                               if (put_user(regs->ARM_pc, usp) == 0) {
+                                       regs->ARM_pc = KERN_RESTART_CODE;
+                               } else {
+                                       regs->ARM_sp += 4;
+                                       force_sigsegv(0, current);
+                               }
 #endif
                        }
                }
index e35d54d43e709d52a3d025165c17cee01da8fc69..2fd88437348b58d3f5bff57c1a429650f321ecca 100644 (file)
@@ -289,13 +289,6 @@ config MACH_NEOCORE926
        help
          Select this if you are using the Adeneo Neocore 926 board.
 
-config MACH_AT91SAM9G20EK_2MMC
-       bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-       depends on ARCH_AT91SAM9G20
-       help
-         Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-         Rev A or B modified for 2 MMC Slots.
-
 endif
 
 # ----------------------------------------------------------
@@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK
        bool "Atmel AT91SAM9G20-EK Evaluation Kit"
        depends on ARCH_AT91SAM9G20
        help
-         Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+         Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+         that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+       bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+       depends on ARCH_AT91SAM9G20
+       help
+         Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+         with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+         onwards.
 
 config MACH_CPU9G20
        bool "Eukrea CPU9G20 board"
@@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
        bool "Enable 16-bit data bus interface to NAND flash"
-       depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+       depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
        help
          On AT91SAM926x boards both types of NAND flash can be present
          (8 and 16 bit data bus width).
index a28e53faf71d5248138eca588915045391678aec..a4102d72cc9b1c8e9d323f432fb5873b2144cc44 100644 (file)
@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
        {       /* DataFlash chip */
                .modalias       = "mtd_dataflash",
                .chip_select    = 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
-       .phy_irq_pin    = AT91_PIN_PC12,
+       .phy_irq_pin    = AT91_PIN_PB0,
        .is_rmii        = 1,
 };
 
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
  */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
        .slot[0] = {
                .bus_width      = 4,
-               .detect_pin     = -ENODEV,
+               .detect_pin     = AT91_PIN_PC2,
                .wp_pin         = -ENODEV,
        },
        .slot[1] = {
                .bus_width      = 4,
-               .detect_pin     = -ENODEV,
+               .detect_pin     = AT91_PIN_PC9,
                .wp_pin         = -ENODEV,
        },
 
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+       .slot_b         = 1,    /* Only one slot so use slot B */
+       .wire4          = 1,
+       .det_pin        = AT91_PIN_PC9,
 };
 #endif
 
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
        {       /* "bottom" led, green, userled1 to be defined */
                .name                   = "ds5",
-               .gpio                   = AT91_PIN_PB12,
+               .gpio                   = AT91_PIN_PB8,
                .active_low             = 1,
                .default_trigger        = "none",
        },
        {       /* "power" led, yellow */
                .name                   = "ds1",
-               .gpio                   = AT91_PIN_PB13,
+               .gpio                   = AT91_PIN_PB9,
                .default_trigger        = "heartbeat",
        }
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
        /* Ethernet */
        at91_add_device_eth(&ek_macb_data);
        /* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
        at91_add_device_mci(0, &ek_mmc_data);
+#else
+       at91_add_device_mmc(0, &ek_mmc_data);
+#endif
        /* I2C */
        at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
        /* LEDs */
index 7177c4aa63421e22e5f57afcadf00e60a98a79fe..242dd077534336269804795d30c4afb04fe1739b 100644 (file)
@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
        kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
        kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
+       /*
+        * Disable propagation of mbus errors to the CPU local bus,
+        * as this causes mbus errors (which can occur for example
+        * for PCI aborts) to throw CPU aborts, which we're not set
+        * up to deal with.
+        */
+       writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
        kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
index 9e80d9232c831e315783509b71a837de115b92b9..418f5017c50e1d916468ebc99e5b958a706d98f6 100644 (file)
@@ -13,6 +13,9 @@
 
 #include <mach/kirkwood.h>
 
+#define CPU_CONFIG             (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP  0x00000004
+
 #define CPU_CONTROL            (BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET              0x00000002
 
index bf1189ff9a34bd62fad9f8ab2c90c04e4703671b..7e8a80f25ddcfca47ce8817ad4f0eeeca3f6ed87 100644 (file)
 #define MMC1_WP_MMC1_WP                MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
 /* PWM */
-#define GPIO27 PWM3 AF2                MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2                MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT                MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT       MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT       MFP_CFG(GPIO118, AF2)
index ea00486a5e5314b5e5255a7c3aa9d4a9af306960..51e0b3ba5f3a3c0110e2a70868ebd6970a01738e 100644 (file)
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
        KEY(0, 0, KEY_E),
-       KEY(1, 0, KEY_R),
-       KEY(2, 0, KEY_T),
-       KEY(3, 0, KEY_HOME),
-       KEY(6, 0, KEY_I),
-       KEY(7, 0, KEY_LEFTSHIFT),
-       KEY(0, 1, KEY_D),
+       KEY(0, 1, KEY_R),
+       KEY(0, 2, KEY_T),
+       KEY(0, 3, KEY_HOME),
+       KEY(0, 6, KEY_I),
+       KEY(0, 7, KEY_LEFTSHIFT),
+       KEY(1, 0, KEY_D),
        KEY(1, 1, KEY_F),
-       KEY(2, 1, KEY_G),
-       KEY(3, 1, KEY_SEND),
-       KEY(6, 1, KEY_K),
-       KEY(7, 1, KEY_ENTER),
-       KEY(0, 2, KEY_X),
-       KEY(1, 2, KEY_C),
+       KEY(1, 2, KEY_G),
+       KEY(1, 3, KEY_SEND),
+       KEY(1, 6, KEY_K),
+       KEY(1, 7, KEY_ENTER),
+       KEY(2, 0, KEY_X),
+       KEY(2, 1, KEY_C),
        KEY(2, 2, KEY_V),
-       KEY(3, 2, KEY_END),
-       KEY(6, 2, KEY_DOT),
-       KEY(7, 2, KEY_CAPSLOCK),
-       KEY(0, 3, KEY_Z),
-       KEY(1, 3, KEY_KPPLUS),
-       KEY(2, 3, KEY_B),
+       KEY(2, 3, KEY_END),
+       KEY(2, 6, KEY_DOT),
+       KEY(2, 7, KEY_CAPSLOCK),
+       KEY(3, 0, KEY_Z),
+       KEY(3, 1, KEY_KPPLUS),
+       KEY(3, 2, KEY_B),
        KEY(3, 3, KEY_F1),
-       KEY(6, 3, KEY_O),
-       KEY(7, 3, KEY_SPACE),
-       KEY(0, 4, KEY_W),
-       KEY(1, 4, KEY_Y),
-       KEY(2, 4, KEY_U),
-       KEY(3, 4, KEY_F2),
+       KEY(3, 6, KEY_O),
+       KEY(3, 7, KEY_SPACE),
+       KEY(4, 0, KEY_W),
+       KEY(4, 1, KEY_Y),
+       KEY(4, 2, KEY_U),
+       KEY(4, 3, KEY_F2),
        KEY(4, 4, KEY_VOLUMEUP),
-       KEY(6, 4, KEY_L),
-       KEY(7, 4, KEY_LEFT),
-       KEY(0, 5, KEY_S),
-       KEY(1, 5, KEY_H),
-       KEY(2, 5, KEY_J),
-       KEY(3, 5, KEY_F3),
+       KEY(4, 6, KEY_L),
+       KEY(4, 7, KEY_LEFT),
+       KEY(5, 0, KEY_S),
+       KEY(5, 1, KEY_H),
+       KEY(5, 2, KEY_J),
+       KEY(5, 3, KEY_F3),
        KEY(5, 5, KEY_VOLUMEDOWN),
-       KEY(6, 5, KEY_M),
-       KEY(4, 5, KEY_ENTER),
-       KEY(7, 5, KEY_RIGHT),
-       KEY(0, 6, KEY_Q),
-       KEY(1, 6, KEY_A),
-       KEY(2, 6, KEY_N),
-       KEY(3, 6, KEY_BACKSPACE),
+       KEY(5, 6, KEY_M),
+       KEY(5, 7, KEY_ENTER),
+       KEY(6, 0, KEY_Q),
+       KEY(6, 1, KEY_A),
+       KEY(6, 2, KEY_N),
+       KEY(6, 3, KEY_BACKSPACE),
        KEY(6, 6, KEY_P),
-       KEY(7, 6, KEY_UP),
        KEY(6, 7, KEY_SELECT),
-       KEY(7, 7, KEY_DOWN),
-       KEY(0, 7, KEY_PROG1),   /*MACRO 1 <User defined> */
-       KEY(1, 7, KEY_PROG2),   /*MACRO 2 <User defined> */
-       KEY(2, 7, KEY_PROG3),   /*MACRO 3 <User defined> */
-       KEY(3, 7, KEY_PROG4),   /*MACRO 4 <User defined> */
-       0
+       KEY(7, 0, KEY_PROG1),   /*MACRO 1 <User defined> */
+       KEY(7, 1, KEY_PROG2),   /*MACRO 2 <User defined> */
+       KEY(7, 2, KEY_PROG3),   /*MACRO 3 <User defined> */
+       KEY(7, 3, KEY_PROG4),   /*MACRO 4 <User defined> */
+       KEY(7, 5, KEY_RIGHT),
+       KEY(7, 6, KEY_UP),
+       KEY(7, 7, KEY_DOWN)
 };
 
 static struct matrix_keymap_data board_map_data = {
index 489556eecbd1189a7a61638deec0f33d3aff59ad..7c5c00df3c70c36bb2a96b39ef015688e3599cb8 100644 (file)
@@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
        unsigned long fint;
        u16 f = 0;
 
-       fint = clk->dpll_data->clk_ref->rate / (n + 1);
+       fint = clk->dpll_data->clk_ref->rate / n;
 
        pr_debug("clock: fint is %lu\n", fint);
 
index c8119781e00aff7f0be0e7965dbd14878edcb55a..9565c05bebd259d050afc597e7578294403470c7 100644 (file)
@@ -489,9 +489,9 @@ static struct clk core_ck = {
 static struct clk dpll3_m2x2_ck = {
        .name           = "dpll3_m2x2_ck",
        .ops            = &clkops_null,
-       .parent         = &dpll3_x2_ck,
+       .parent         = &dpll3_m2_ck,
        .clkdm_name     = "dpll3_clkdm",
-       .recalc         = &followparent_recalc,
+       .recalc         = &omap3_clkoutx2_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
index f8657568b1baff51eeb6b950de4b35b6088d47c7..f3c992e29651c1c0520a28eb551717537ea82a93 100644 (file)
@@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
 void gpmc_cs_free(int cs)
 {
        spin_lock(&gpmc_mem_lock);
-       if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+       if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
                printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
                BUG();
                spin_unlock(&gpmc_mem_lock);
index 494572825c7da49bf3a665adaf1b8574b9dbe9ef..ec0e14b96682a9b6117ff70420803d280d63a120 100644 (file)
@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if    defined(CONFIG_SND_AC97_CODEC) || \
+       defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
        GPIO34_AC97_SYSCLK,
        GPIO35_AC97_SDATA_IN_0,
index 983cc8c2008190db5e686f65a69f2a47bd2fd5cc..9e4d9816726ad5d75c0657f9a32d0b36c0ec3aa7 100644 (file)
@@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
                pxa27x_freq_table[i].frequency = freq;
                pxa27x_freq_table[i].index = i;
        }
+       pxa27x_freq_table[i].index = i;
        pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
        /*
index 67f34a8d8e60ee58c7f9257fd4812d9dd827dc34..149cdd9aee4d51d23977d769d1a3d041897f12ee 100644 (file)
@@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
                table[i].index = i;
                table[i].frequency = freqs[i].cpufreq_mhz * 1000;
        }
-       table[num].frequency = i;
+       table[num].index = i;
        table[num].frequency = CPUFREQ_TABLE_END;
 
        pxa3xx_freqs = freqs;
index abff9e1327492b42254a455c1f57dcbb0604df57..83bd3c6e3884594c2beac41e777220080865339c 100644 (file)
@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
        .model            = 7846,
        .vref_delay_usecs = 100,
-       .pressure_max     = 512,
+       .pressure_max     = 1024,
        .debounce_max     = 10,
        .debounce_tol     = 3,
        .debounce_rep     = 1,
index 241880608ac64d3293c8d1e2e190572589f7878d..a73bc86a3c263d238e2a7b7a82d297748857b9ce 100644 (file)
@@ -46,5 +46,6 @@
                beq     1001f
                bic     \irqstat, \irqstat, #0x80000000
                mov     \irqnr, \irqstat, lsr #16
+               add     \irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
                .endm
index 3da45d05174398d0b2767f5efc0ab8efa0d6691d..d98023f55503881c3d7e177b1112686f0ef8b5c0 100644 (file)
@@ -802,10 +802,12 @@ static void __init spitz_init(void)
 {
        spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+#ifdef CONFIG_MACH_BORZOI
        if (machine_is_borzoi()) {
                sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
                sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
        }
+#endif
 
        platform_scoop_config = &spitz_pcmcia_config;
 
index be60d6deee8b018c883cc547eae53f4e6d2b2a66..653e25be3dd82df532b4b3a508fb45e393b00876 100644 (file)
@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 
 static struct platform_device rtc_device = {
-       .name = "rtc0",
+       .name = "rtc-coh901331",
        .id = -1,
        .num_resources = ARRAY_SIZE(rtc_resources),
        .resource = rtc_resources,
index 71ebd7fcfea158afa5d0f6eb14b4d9202f79be5a..7c345b757df12d17014416116ce07a39d663c634 100644 (file)
@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
 
 static int check_gpio(int gpio)
 {
-       if (unlikely(gpio_valid(gpio)) < 0) {
+       if (unlikely(gpio_valid(gpio) < 0)) {
                printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
                dump_stack();
                return -1;
index 22086e696e8e38f00ea8a28f68b7e618abee6b33..857a6839071cd57a36688cd4498cda34c172d927 100644 (file)
@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
 
-#define mfp_to_gpio(m) ((m) % 128)
+#define mfp_to_gpio(m) ((m) % 256)
 
 /* list of all the configurable MFP pins */
 enum {
index 9405d0379c850da2b39651a30ee228fb91113685..be58f9fe65b0db082b4b1c8af428dd6cca682a39 100644 (file)
@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
        unsigned long val, flags;
 
-       BUG_ON(mfp >= MFP_PIN_MAX);
+       BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
        spin_lock_irqsave(&mfp_spin_lock, flags);
        val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
        unsigned long flags;
 
-       BUG_ON(mfp >= MFP_PIN_MAX);
+       BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
        spin_lock_irqsave(&mfp_spin_lock, flags);
        mfpr_writel(mfp_table[mfp].mfpr_off, val);
index 94be7bb6cb9a9f345721053ea491b6353b431191..07b976da617418d32b6c0a7d2d84a4ffeb7a5ace 100644 (file)
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri Sep 18 21:42:00 2009
+# Last update: Wed Nov 25 22:14:58 2009
 #
 # machine_is_xxx       CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -928,7 +928,7 @@ palmt5                      MACH_PALMT5             PALMT5                  917
 palmtc                 MACH_PALMTC             PALMTC                  918
 omap_apollon           MACH_OMAP_APOLLON       OMAP_APOLLON            919
 mxc30030evb            MACH_MXC30030EVB        MXC30030EVB             920
-rea_2d                 MACH_REA_2D             REA_2D                  921
+rea_cpu2               MACH_REA_2D             REA_2D                  921
 eti3e524               MACH_TI3E524            TI3E524                 922
 ateb9200               MACH_ATEB9200           ATEB9200                923
 auckland               MACH_AUCKLAND           AUCKLAND                924
@@ -2421,3 +2421,118 @@ liberty                 MACH_LIBERTY            LIBERTY                 2434
 mh355                  MACH_MH355              MH355                   2435
 pc7802                 MACH_PC7802             PC7802                  2436
 gnet_sgc               MACH_GNET_SGC           GNET_SGC                2437
+einstein15             MACH_EINSTEIN15         EINSTEIN15              2438
+cmpd                   MACH_CMPD               CMPD                    2439
+davinci_hase1          MACH_DAVINCI_HASE1      DAVINCI_HASE1           2440
+lgeincitephone         MACH_LGEINCITEPHONE     LGEINCITEPHONE          2441
+ea313x                 MACH_EA313X             EA313X                  2442
+fwbd_39064             MACH_FWBD_39064         FWBD_39064              2443
+fwbd_390128            MACH_FWBD_390128        FWBD_390128             2444
+pelco_moe              MACH_PELCO_MOE          PELCO_MOE               2445
+minimix27              MACH_MINIMIX27          MINIMIX27               2446
+omap3_thunder          MACH_OMAP3_THUNDER      OMAP3_THUNDER           2447
+passionc               MACH_PASSIONC           PASSIONC                2448
+mx27amata              MACH_MX27AMATA          MX27AMATA               2449
+bgat1                  MACH_BGAT1              BGAT1                   2450
+buzz                   MACH_BUZZ               BUZZ                    2451
+mb9g20                 MACH_MB9G20             MB9G20                  2452
+yushan                 MACH_YUSHAN             YUSHAN                  2453
+lizard                 MACH_LIZARD             LIZARD                  2454
+omap3polycom           MACH_OMAP3POLYCOM       OMAP3POLYCOM            2455
+smdkv210               MACH_SMDKV210           SMDKV210                2456
+bravo                  MACH_BRAVO              BRAVO                   2457
+siogentoo1             MACH_SIOGENTOO1         SIOGENTOO1              2458
+siogentoo2             MACH_SIOGENTOO2         SIOGENTOO2              2459
+sm3k                   MACH_SM3K               SM3K                    2460
+acer_tempo_f900                MACH_ACER_TEMPO_F900    ACER_TEMPO_F900         2461
+sst61vc010_dev         MACH_SST61VC010_DEV     SST61VC010_DEV          2462
+glittertind            MACH_GLITTERTIND        GLITTERTIND             2463
+omap_zoom3             MACH_OMAP_ZOOM3         OMAP_ZOOM3              2464
+omap_3630sdp           MACH_OMAP_3630SDP       OMAP_3630SDP            2465
+cybook2440             MACH_CYBOOK2440         CYBOOK2440              2466
+torino_s               MACH_TORINO_S           TORINO_S                2467
+havana                 MACH_HAVANA             HAVANA                  2468
+beaumont_11            MACH_BEAUMONT_11        BEAUMONT_11             2469
+vanguard               MACH_VANGUARD           VANGUARD                2470
+s5pc110_draco          MACH_S5PC110_DRACO      S5PC110_DRACO           2471
+cartesio_two           MACH_CARTESIO_TWO       CARTESIO_TWO            2472
+aster                  MACH_ASTER              ASTER                   2473
+voguesv210             MACH_VOGUESV210         VOGUESV210              2474
+acm500x                        MACH_ACM500X            ACM500X                 2475
+km9260                 MACH_KM9260             KM9260                  2476
+nideflexg1             MACH_NIDEFLEXG1         NIDEFLEXG1              2477
+ctera_plug_io          MACH_CTERA_PLUG_IO      CTERA_PLUG_IO           2478
+smartq7                        MACH_SMARTQ7            SMARTQ7                 2479
+at91sam9g10ek2         MACH_AT91SAM9G10EK2     AT91SAM9G10EK2          2480
+asusp527               MACH_ASUSP527           ASUSP527                2481
+at91sam9g20mpm2                MACH_AT91SAM9G20MPM2    AT91SAM9G20MPM2         2482
+topasa900              MACH_TOPASA900          TOPASA900               2483
+electrum_100           MACH_ELECTRUM_100       ELECTRUM_100            2484
+mx51grb                        MACH_MX51GRB            MX51GRB                 2485
+xea300                 MACH_XEA300             XEA300                  2486
+htcstartrek            MACH_HTCSTARTREK        HTCSTARTREK             2487
+lima                   MACH_LIMA               LIMA                    2488
+csb740                 MACH_CSB740             CSB740                  2489
+usb_s8815              MACH_USB_S8815          USB_S8815               2490
+watson_efm_plugin      MACH_WATSON_EFM_PLUGIN  WATSON_EFM_PLUGIN       2491
+milkyway               MACH_MILKYWAY           MILKYWAY                2492
+g4evm                  MACH_G4EVM              G4EVM                   2493
+picomod6               MACH_PICOMOD6           PICOMOD6                2494
+omapl138_hawkboard     MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD      2495
+ip6000                 MACH_IP6000             IP6000                  2496
+ip6010                 MACH_IP6010             IP6010                  2497
+utm400                 MACH_UTM400             UTM400                  2498
+omap3_zybex            MACH_OMAP3_ZYBEX        OMAP3_ZYBEX             2499
+wireless_space         MACH_WIRELESS_SPACE     WIRELESS_SPACE          2500
+sx560                  MACH_SX560              SX560                   2501
+ts41x                  MACH_TS41X              TS41X                   2502
+elphel10373            MACH_ELPHEL10373        ELPHEL10373             2503
+rhobot                 MACH_RHOBOT             RHOBOT                  2504
+mx51_refresh           MACH_MX51_REFRESH       MX51_REFRESH            2505
+ls9260                 MACH_LS9260             LS9260                  2506
+shank                  MACH_SHANK              SHANK                   2507
+qsd8x50_st1            MACH_QSD8X50_ST1        QSD8X50_ST1             2508
+at91sam9m10ekes                MACH_AT91SAM9M10EKES    AT91SAM9M10EKES         2509
+hiram                  MACH_HIRAM              HIRAM                   2510
+phy3250                        MACH_PHY3250            PHY3250                 2511
+ea3250                 MACH_EA3250             EA3250                  2512
+fdi3250                        MACH_FDI3250            FDI3250                 2513
+whitestone             MACH_WHITESTONE         WHITESTONE              2514
+at91sam9263nit         MACH_AT91SAM9263NIT     AT91SAM9263NIT          2515
+ccmx51                 MACH_CCMX51             CCMX51                  2516
+ccmx51js               MACH_CCMX51JS           CCMX51JS                2517
+ccwmx51                        MACH_CCWMX51            CCWMX51                 2518
+ccwmx51js              MACH_CCWMX51JS          CCWMX51JS               2519
+mini6410               MACH_MINI6410           MINI6410                2520
+tiny6410               MACH_TINY6410           TINY6410                2521
+nano6410               MACH_NANO6410           NANO6410                2522
+at572d940hfnldb                MACH_AT572D940HFNLDB    AT572D940HFNLDB         2523
+htcleo                 MACH_HTCLEO             HTCLEO                  2524
+avp13                  MACH_AVP13              AVP13                   2525
+xxsvideod              MACH_XXSVIDEOD          XXSVIDEOD               2526
+vpnext                 MACH_VPNEXT             VPNEXT                  2527
+swarco_itc3            MACH_SWARCO_ITC3        SWARCO_ITC3             2528
+tx51                   MACH_TX51               TX51                    2529
+dolby_cat1021          MACH_DOLBY_CAT1021      DOLBY_CAT1021           2530
+mx28evk                        MACH_MX28EVK            MX28EVK                 2531
+phoenix260             MACH_PHOENIX260         PHOENIX260              2532
+uvaca_stork            MACH_UVACA_STORK        UVACA_STORK             2533
+smartq5                        MACH_SMARTQ5            SMARTQ5                 2534
+all3078                        MACH_ALL3078            ALL3078                 2535
+ctera_2bay_ds          MACH_CTERA_2BAY_DS      CTERA_2BAY_DS           2536
+siogentoo3             MACH_SIOGENTOO3         SIOGENTOO3              2537
+epb5000                        MACH_EPB5000            EPB5000                 2538
+hy9263                 MACH_HY9263             HY9263                  2539
+acer_tempo_m900                MACH_ACER_TEMPO_M900    ACER_TEMPO_M900         2540
+acer_tempo_dx650       MACH_ACER_TEMPO_DX900   ACER_TEMPO_DX900        2541
+acer_tempo_x960                MACH_ACER_TEMPO_X960    ACER_TEMPO_X960         2542
+acer_eten_v900         MACH_ACER_ETEN_V900     ACER_ETEN_V900          2543
+acer_eten_x900         MACH_ACER_ETEN_X900     ACER_ETEN_X900          2544
+bonnell                        MACH_BONNELL            BONNELL                 2545
+oht_mx27               MACH_OHT_MX27           OHT_MX27                2546
+htcquartz              MACH_HTCQUARTZ          HTCQUARTZ               2547
+davinci_dm6467tevm     MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM      2548
+c3ax03                 MACH_C3AX03             C3AX03                  2549
+mxt_td60               MACH_MXT_TD60           MXT_TD60                2550
+esyx                   MACH_ESYX               ESYX                    2551
+bulldog                        MACH_BULLDOG            BULLDOG                 2553
index 331d45bab18f3b13e4eaf4faa4aaf6433883f924..2aa373cc61b58e7f7c4807837a60a0c687269f27 100644 (file)
@@ -52,7 +52,7 @@
 #define BUG()                                                          \
        do {                                                            \
                _BUG_OR_WARN(0);                                        \
-               for (;;);                                               \
+               unreachable();                                          \
        } while (0)
 
 #define WARN_ON(condition)                                                     \
index 1f170216d2f9b35f475db4a7fa37d9c2064a9fe3..3946aff4f4148b6133f31429fbbe9facb40b35c0 100644 (file)
@@ -225,8 +225,13 @@ int blackfin_dma_suspend(void)
 void blackfin_dma_resume(void)
 {
        int i;
-       for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i)
-               dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+
+       for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+               dma_ch[i].regs->cfg = 0;
+
+               if (i < MAX_DMA_SUSPEND_CHANNELS)
+                       dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+       }
 }
 #endif
 
index f7b9cdce823977a58e944999f6cbb35b1d0e0bbd..b52c1f8c4bc0e9451ab2def134dfc7e095e45185 100644 (file)
@@ -38,7 +38,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
 #ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
        d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
+#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
        d_cache |= CPLB_L1_AOW | CPLB_WT;
 #endif
 #endif
index 430ae39456e8e1b5cbe9c2c5c6396ff921699722..5cc7e2e9e4156f202bd9bc10f7c58cfa72e0bdbf 100644 (file)
@@ -151,7 +151,7 @@ void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_
        regs->pc = new_ip;
        if (current->mm)
                regs->p5 = current->mm->start_data;
-#ifdef CONFIG_SMP
+#ifndef CONFIG_SMP
        task_thread_info(current)->l1_task_info.stack_start =
                (void *)current->mm->context.stack_start;
        task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
index 0982b5d5af100ab70f3aee3efbd780eb234175b2..56b0ba12175f2d6922068c4284fa9a0487a75acd 100644 (file)
@@ -315,7 +315,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                        case BFIN_MEM_ACCESS_CORE:
                        case BFIN_MEM_ACCESS_CORE_ONLY:
                                copied = access_process_vm(child, addr, &data,
-                                                          to_copy, 0);
+                                                          to_copy, 1);
                                if (copied)
                                        break;
 
index e9c65390edd1852bdf4b691542e34e3687a29a95..2829dd0400f18b405953e2ff61e2996d3c4c7115 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf518/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
 #define ANOMALY_05000461 (1)
 /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
 #define ANOMALY_05000462 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
index 3f9052687fa8065c871d00e268c34c45f85a7f31..02040df8ec80be9ef3b08e1525b76aa22507a717 100644 (file)
@@ -1,14 +1,18 @@
 /*
- * File: include/asm-blackfin/mach-bf527/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
  *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define ANOMALY_05000467 (1)
 /* PLL Latches Incorrect Settings During Reset */
 #define ANOMALY_05000469 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
index cd83db2fb1a17fdc99e3cba7a7423005430afc80..9b3f7a27714d3d8964619e61626d366d6eef7a05 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
index f091ad2d8ea8dd23001bd598027e34aeb97b3598..d2c427bc6656e8fa0c6be3234c644d1fa8288aa6 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
index 26b76083e14c084fb2cd48622573ffeb70566b29..d882b7e6f59bcf443e00270ef01cd7788b821aa1 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf538/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
index 52b116ae522a57fc153515055ed7389ac784d18f..7d08c7524498a6f0e4645ba106925c7f3cf292eb 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -24,6 +28,8 @@
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
+#define ANOMALY_05000474 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
-#define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
index 0261a5e751b35189d79f5684ff227f6552145ff3..f99f174b129f694609710faf9fe653f01f76b503 100644 (file)
        \reg\().h = _corelock;
 .endm
 
+.macro safe_testset addr:req, scratch:req
+#if ANOMALY_05000477
+       cli \scratch;
+       testset (\addr);
+       sti \scratch;
+#else
+       testset (\addr);
+#endif
+.endm
+
 /*
  * r0 = address of atomic data to flush and invalidate (32bit).
  *
@@ -33,7 +43,7 @@ ENTRY(_get_core_lock)
        cli r0;
        coreslot_loadaddr p0;
 .Lretry_corelock:
-       testset (p0);
+       safe_testset p0, r2;
        if cc jump .Ldone_corelock;
        SSYNC(r2);
        jump .Lretry_corelock
@@ -56,7 +66,7 @@ ENTRY(_get_core_lock_noflush)
        cli r0;
        coreslot_loadaddr p0;
 .Lretry_corelock_noflush:
-       testset (p0);
+       safe_testset p0, r2;
        if cc jump .Ldone_corelock_noflush;
        SSYNC(r2);
        jump .Lretry_corelock_noflush
index 70da495c96652e1c407d8ecb49e5607b389cec6a..5ddc981e9937b2d11d24a4efdb17217e24b4f18a 100644 (file)
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
 /* False Hardware Error Exception when ISR Context Is Not Restored */
-#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* Temporarily walk around for bug 5423 till this issue is confirmed by
+ * official anomaly document. It looks 05000281 still exists on bf561
+ * v0.5.
+ */
+#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5)
 /* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (1)
 /* Reads Will Receive Incorrect Data under Certain Conditions */
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000119 (0)
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
 
 #endif
index 9dbafcdcf4791e3ba7eb8522cf1b6de911c05b0a..f2ca211a76a09a4497b0b18714cac2df2e0fb8a5 100644 (file)
@@ -57,3 +57,8 @@
         (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
 # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
 #endif
+
+#if ANOMALY_05000475 && \
+       (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory"
+#endif
index d98585f3237d5114f9d054e386c64898a13ce08a..d92b168c83281cdd89326875e80ca75afe890c80 100644 (file)
@@ -276,10 +276,9 @@ void smp_send_reschedule(int cpu)
        if (cpu_is_offline(cpu))
                return;
 
-       msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+       msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
        if (!msg)
                return;
-       memset(msg, 0, sizeof(msg));
        INIT_LIST_HEAD(&msg->list);
        msg->type = BFIN_IPI_RESCHEDULE;
 
@@ -305,10 +304,9 @@ void smp_send_stop(void)
        if (cpus_empty(callmap))
                return;
 
-       msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+       msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
        if (!msg)
                return;
-       memset(msg, 0, sizeof(msg));
        INIT_LIST_HEAD(&msg->list);
        msg->type = BFIN_IPI_CPU_STOP;
 
index dcbaea7ce12868436a39d4f2bd31a406a6d3a704..f0acde68aaea5c3dd685b853f542647393bbbd6b 100644 (file)
@@ -4,8 +4,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/swiotlb.h>
 
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
 extern void pci_swiotlb_init(void);
index 285aae8431c6278d08c6ff862a18fdf66b2e52bf..53292abf846c453b45c2f3e3afcd57ca0e9a6308 100644 (file)
@@ -41,7 +41,7 @@ struct dma_map_ops swiotlb_dma_ops = {
 void __init swiotlb_dma_init(void)
 {
        dma_ops = &swiotlb_dma_ops;
-       swiotlb_init();
+       swiotlb_init(1);
 }
 
 void __init pci_swiotlb_init(void)
@@ -51,7 +51,7 @@ void __init pci_swiotlb_init(void)
                swiotlb = 1;
                printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
                machvec_init("dig");
-               swiotlb_init();
+               swiotlb_init(1);
                dma_ops = &swiotlb_dma_ops;
 #else
                panic("Unable to find Intel IOMMU");
index 03bd56a2fb6e5f02a265111ecbc84bf161d13f41..fd7620f025fab0ab25bcd9bca3e3dbf00b78161d 100644 (file)
@@ -1,6 +1,7 @@
 config MIPS
        bool
        default y
+       select HAVE_GENERIC_DMA_COHERENT
        select HAVE_IDE
        select HAVE_OPROFILE
        select HAVE_ARCH_KGDB
@@ -357,7 +358,14 @@ config SGI_IP22
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_R4X00
        select SYS_HAS_CPU_R5000
-       select SYS_HAS_EARLY_PRINTK
+       #
+       # Disable EARLY_PRINTK for now since it leads to overwritten prom
+       # memory during early boot on some machines.
+       #
+       # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+       # for a more details discussion
+       #
+       # select SYS_HAS_EARLY_PRINTK
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
@@ -409,7 +417,14 @@ config SGI_IP28
        select SGI_HAS_ZILOG
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_R10000
-       select SYS_HAS_EARLY_PRINTK
+       #
+       # Disable EARLY_PRINTK for now since it leads to overwritten prom
+       # memory during early boot on some machines.
+       #
+       # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+       # for a more details discussion
+       #
+       # select SYS_HAS_EARLY_PRINTK
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
       help
@@ -1438,6 +1453,7 @@ choice
 
 config PAGE_SIZE_4KB
        bool "4kB"
+       depends on !CPU_LOONGSON2
        help
         This option select the standard 4kB Linux page size.  On some
         R3000-family processors this is the only available page size.  Using
@@ -1762,7 +1778,7 @@ config SYS_SUPPORTS_SMARTMIPS
 
 config ARCH_FLATMEM_ENABLE
        def_bool y
-       depends on !NUMA
+       depends on !NUMA && !CPU_LOONGSON2
 
 config ARCH_DISCONTIGMEM_ENABLE
        bool
index 079e33d527834803e85efec766411ab76f0b2653..fb284c3b2cff4082626f425f54a700798b9f2da5 100644 (file)
@@ -100,7 +100,7 @@ static __init void prom_init_console(void)
 
 static __init void prom_init_cmdline(void)
 {
-       char buf[CL_SIZE];
+       static char buf[CL_SIZE] __initdata;
 
        /* Get the kernel command line from CFE */
        if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
index c69813b8488cd6fc52d50d9b569db508a40254e7..6c6a19aebe1fa21338df29e7d6566b3e0adaea23 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar  4 23:08:06 2009
+# Linux kernel version: 2.6.32-rc6
+# Sun Nov  8 22:59:47 2009
 #
 CONFIG_MIPS=y
 
@@ -9,16 +9,18 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
@@ -45,6 +47,7 @@ CONFIG_MACH_TX49XX=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_RBTX4927=y
 CONFIG_TOSHIBA_RBTX4938=y
@@ -86,7 +89,6 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -101,7 +103,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -137,6 +139,7 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
@@ -154,7 +157,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -175,6 +181,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -194,11 +201,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -209,8 +217,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -220,25 +232,35 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 # CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
+CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -246,8 +268,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -274,6 +296,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 
 #
@@ -288,6 +311,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 CONFIG_NET=y
@@ -295,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -311,6 +334,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -336,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -365,9 +389,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -376,9 +400,9 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -414,16 +438,20 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_RBTX4939=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -435,7 +463,15 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_TXX9NDFMC=m
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -471,6 +507,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -534,8 +571,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
@@ -574,6 +616,8 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
@@ -602,18 +646,15 @@ CONFIG_TC35815=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -653,6 +694,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_TXX9=y
@@ -666,7 +708,9 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TX4939=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -686,6 +730,10 @@ CONFIG_SPI_TXX9=y
 # SPI Protocol Masters
 #
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 
@@ -701,17 +749,22 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -740,28 +793,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -772,7 +814,42 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_TXX9ACLC=m
+CONFIG_HAS_TXX9_ACLC=y
+CONFIG_SND_SOC_TXX9ACLC_AC97=m
+CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -783,6 +860,8 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
 
 #
 # LED Triggers
@@ -792,7 +871,12 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -820,6 +904,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 # CONFIG_RTC_DRV_R9701 is not set
 CONFIG_RTC_DRV_RS5C348=y
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -840,8 +925,26 @@ CONFIG_RTC_DRV_DS1742=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_TX4939=y
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_TXX9_DMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -853,9 +956,10 @@ CONFIG_RTC_DRV_TX4939=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -865,6 +969,10 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -890,7 +998,27 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -922,6 +1050,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -929,11 +1058,9 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
@@ -946,6 +1073,7 @@ CONFIG_CMDLINE=""
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -959,6 +1087,10 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
index 6cf29c26e873788a78221ab517dc97cc6ae5386c..540c98a810d1bce2639e65f09610651ee3fb8aff 100644 (file)
@@ -11,9 +11,7 @@
 static inline void __noreturn BUG(void)
 {
        __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
-       /* Fool GCC into thinking the function doesn't return. */
-       while (1)
-               ;
+       unreachable();
 }
 
 #define HAVE_ARCH_BUG
index d16afddb09a9ff23bc461d99e34f0657e56a58af..664ba53dc32a79fed9b7ed433e88a8b3a56e5d45 100644 (file)
@@ -3,6 +3,7 @@
 
 #include <asm/scatterlist.h>
 #include <asm/cache.h>
+#include <asm-generic/dma-coherent.h>
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
                           dma_addr_t *dma_handle, gfp_t flag);
@@ -73,14 +74,4 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
               enum dma_data_direction direction);
 
-#if 0
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-       dma_addr_t device_addr, size_t size, int flags);
-extern void dma_release_declared_memory(struct device *dev);
-extern void * dma_mark_declared_memory_occupied(struct device *dev,
-       dma_addr_t device_addr, size_t size);
-#endif
-
 #endif /* _ASM_DMA_MAPPING_H */
index a2250f390a292626e9fde6db8ab3edee41e9ea18..c892bfb3e2c1d74eca5a902194e71b46f3e87635 100644 (file)
@@ -75,6 +75,7 @@
 
 #define MADV_MERGEABLE   12            /* KSM may merge identical pages */
 #define MADV_UNMERGEABLE 13            /* KSM may not merge identical pages */
+#define MADV_HWPOISON    100           /* poison a page for testing */
 
 /* compatibility flags */
 #define MAP_FILE       0
index fcf5f98d90ccf6227906449d24b2cfb016a6e1ae..83b5509e09e8cf99a6bd966ee991ce0234806566 100644 (file)
@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSTEM_H
 #define _ASM_SYSTEM_H
 
+#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 
@@ -193,10 +194,6 @@ extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 v
 #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
 #endif
 
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
 {
        switch (size) {
@@ -205,11 +202,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
        case 8:
                return __xchg_u64(ptr, x);
        }
-       __xchg_called_with_bad_pointer();
+
        return x;
 }
 
-#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x)                                                   \
+({                                                                     \
+       BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc);                            \
+                                                                       \
+       ((__typeof__(*(ptr)))                                           \
+               __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))));     \
+})
 
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
index 98bd7de7577811e13c4a04379025f8c6e026a24d..b102e4f1630eaa8e021b4c61b0b959f646f2bb81 100644 (file)
@@ -173,11 +173,12 @@ void smtc_distribute_timer(int vpe)
        unsigned int mtflags;
        int cpu;
        struct clock_event_device *cd;
-       unsigned long nextstamp = 0L;
+       unsigned long nextstamp;
        unsigned long reference;
 
 
 repeat:
+       nextstamp = 0L;
        for_each_online_cpu(cpu) {
            /*
             * Find virtual CPUs within the current VPE who have
index 3fe1fcfa2e7301825427c8f44faf80efc2969ed2..fe0d7980560368056e187dcc9f852b3218a08951 100644 (file)
@@ -306,6 +306,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
 
        if (cpu_has_llsc && R10000_LLSC_WAR) {
                __asm__ __volatile__ (
+               "       .set    mips3                                   \n"
                "       li      %[err], 0                               \n"
                "1:     ll      %[old], (%[addr])                       \n"
                "       move    %[tmp], %[new]                          \n"
@@ -320,6 +321,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
                "       "STR(PTR)"      1b, 4b                          \n"
                "       "STR(PTR)"      2b, 4b                          \n"
                "       .previous                                       \n"
+               "       .set    mips0                                   \n"
                : [old] "=&r" (old),
                  [err] "=&r" (err),
                  [tmp] "=&r" (tmp)
@@ -329,6 +331,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
                : "memory");
        } else if (cpu_has_llsc) {
                __asm__ __volatile__ (
+               "       .set    mips3                                   \n"
                "       li      %[err], 0                               \n"
                "1:     ll      %[old], (%[addr])                       \n"
                "       move    %[tmp], %[new]                          \n"
@@ -347,6 +350,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
                "       "STR(PTR)"      1b, 5b                          \n"
                "       "STR(PTR)"      2b, 5b                          \n"
                "       .previous                                       \n"
+               "       .set    mips0                                   \n"
                : [old] "=&r" (old),
                  [err] "=&r" (err),
                  [tmp] "=&r" (tmp)
index 890f77927d628b0c203c92c7712415a9c52a819f..454b53924490c58ed383f047f84f68e8be117afe 100644 (file)
@@ -163,33 +163,34 @@ static int isBranchInstr(mips_instruction * i)
 
 /*
  * In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit.  This does imply that, if a full 32
- * FPRs are desired, there needs to be a flip-flop that can be written
- * to one at that bit position.  In any case, O32 MIPS ABI uses
- * only the even FPRs (Status.FR = 0).
+ * basis of the Status.FR bit.  If an FPU is not present, the FR bit
+ * is hardwired to zero, which would imply a 32-bit FPU even for
+ * 64-bit CPUs.  For 64-bit kernels with no FPU we use TIF_32BIT_REGS
+ * as a proxy for the FR bit so that a 64-bit FPU is emulated.  In any
+ * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the
+ * even FPRs are used (Status.FR = 0).
  */
-
-#define CP0_STATUS_FR_SUPPORT
-
-#ifdef CP0_STATUS_FR_SUPPORT
-#define FR_BIT ST0_FR
+static inline int cop1_64bit(struct pt_regs *xcp)
+{
+       if (cpu_has_fpu)
+               return xcp->cp0_status & ST0_FR;
+#ifdef CONFIG_64BIT
+       return !test_thread_flag(TIF_32BIT_REGS);
 #else
-#define FR_BIT 0
+       return 0;
 #endif
+}
+
+#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \
+                       (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32))
 
-#define SIFROMREG(si, x) ((si) = \
-                       (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
-                       (int)ctx->fpr[x] : \
-                       (int)(ctx->fpr[x & ~1] >> 32 ))
-#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \
-                       (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
+#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \
+                       cop1_64bit(xcp) || !(x & 1) ? \
                        ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
                        ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
 
-#define DIFROMREG(di, x) ((di) = \
-                       ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)])
-#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \
-                       = (di))
+#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
+#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
 
 #define SPFROMREG(sp, x) SIFROMREG((sp).bits, x)
 #define SPTOREG(sp, x) SITOREG((sp).bits, x)
index 7e48e76148aa73aea2de549fb3e9439d16fb6f82..9367e33fbd1822d92f55302a38fb872982e2fb7d 100644 (file)
@@ -90,6 +90,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 {
        void *ret;
 
+       if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+               return ret;
+
        gfp = massage_gfp_flags(dev, gfp);
 
        ret = (void *) __get_free_pages(gfp, get_order(size));
@@ -122,6 +125,10 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
        dma_addr_t dma_handle)
 {
        unsigned long addr = (unsigned long) vaddr;
+       int order = get_order(size);
+
+       if (dma_release_from_coherent(dev, order, vaddr))
+               return;
 
        plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
 
index 61888ff72c87ce7bb56c3ea6c269f9a8a801ce8d..9035c64bc5ed4e27b0661231507de7346848a07f 100644 (file)
@@ -54,7 +54,8 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 {
        char *memsize_str;
        unsigned int memsize;
-       char cmdline[CL_SIZE], *ptr;
+       char *ptr;
+       static char cmdline[CL_SIZE] __initdata;
 
        /* otherwise look in the environment */
        memsize_str = prom_getenv("memsize");
index 9f40e1ff9b4fe4c71b1827d83972419b2fb4dc81..041fc1afc3f4bf20e9ee7def1dd9de4310010f0b 100644 (file)
@@ -110,7 +110,6 @@ static struct korina_device korina_dev0_data = {
 static struct platform_device korina_dev0 = {
        .id = -1,
        .name = "korina",
-       .dev.driver_data = &korina_dev0_data,
        .resource = korina_dev0_res,
        .num_resources = ARRAY_SIZE(korina_dev0_res),
 };
@@ -332,6 +331,8 @@ static int __init plat_setup_devices(void)
        /* set the uart clock to the current cpu frequency */
        rb532_uart_res[0].uartclk = idt_cpu_freq;
 
+       dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data);
+
        return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }
 
index 46ca24dbcc2d0ea035fe104c46cc03ab7684c2aa..ad5bd10979740673806c5e8b4620dcd6310e039d 100644 (file)
@@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag)
 
 void __init prom_setup_cmdline(void)
 {
-       char cmd_line[CL_SIZE];
+       static char cmd_line[CL_SIZE] __initdata;
        char *cp, *board;
        int prom_argc;
        char **prom_argv, **prom_envp;
index e10184c1b3e14cebd667166503fc67297087b257..d66802edebb2f7ea85d5004ac2791905a93ad57c 100644 (file)
@@ -160,7