Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
authorLinus Torvalds <torvalds@woody.osdl.org>
Thu, 7 Dec 2006 17:05:15 +0000 (09:05 -0800)
committerLinus Torvalds <torvalds@woody.osdl.org>
Thu, 7 Dec 2006 17:05:15 +0000 (09:05 -0800)
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits)
  [NETFILTER]: Fix non-ANSI func. decl.
  [TG3]: Identify Serdes devices more clearly.
  [TG3]: Use msleep.
  [TG3]: Use netif_msg_*.
  [TG3]: Allow partial speed advertisement.
  [TG3]: Add TG3_FLG2_IS_NIC flag.
  [TG3]: Add 5787F device ID.
  [TG3]: Fix Phy loopback.
  [WANROUTER]: Kill kmalloc debugging code.
  [TCP] inet_twdr_hangman: Delete unnecessary memory barrier().
  [NET]: Memory barrier cleanups
  [IPSEC]: Fix inetpeer leak in ipv4 xfrm dst entries.
  audit: disable ipsec auditing when CONFIG_AUDITSYSCALL=n
  audit: Add auditing to ipsec
  [IRDA] irlan: Fix compile warning when CONFIG_PROC_FS=n
  [IrDA]: Incorrect TTP header reservation
  [IrDA]: PXA FIR code device model conversion
  [GENETLINK]: Fix misplaced command flags.
  [NETLIK]: Add a pointer to the Generic Netlink wiki page.
  [IPV6] RAW: Don't release unlocked sock.
  ...

1038 files changed:
Documentation/DMA-API.txt
Documentation/DocBook/kernel-api.tmpl
Documentation/IPMI.txt
Documentation/block/as-iosched.txt
Documentation/devices.txt
Documentation/filesystems/Locking
Documentation/filesystems/fuse.txt
Documentation/filesystems/sysv-fs.txt
Documentation/i386/boot.txt
Documentation/kernel-parameters.txt
Documentation/power/s2ram.txt [new file with mode: 0644]
Documentation/power/swsusp-and-swap-files.txt [new file with mode: 0644]
Documentation/power/swsusp.txt
Documentation/power/userland-swsusp.txt
Documentation/stable_api_nonsense.txt
Documentation/sysctl/kernel.txt
Documentation/x86_64/boot-options.txt
MAINTAINERS
REPORTING-BUGS
arch/alpha/kernel/pci.c
arch/alpha/kernel/sys_miata.c
arch/alpha/kernel/sys_nautilus.c
arch/alpha/mm/fault.c
arch/arm/kernel/signal.c
arch/arm/mach-omap1/devices.c
arch/arm/mach-s3c2410/dma.c
arch/arm/mm/fault.c
arch/arm26/kernel/ecard.c
arch/arm26/mm/fault.c
arch/arm26/mm/memc.c
arch/avr32/kernel/kprobes.c
arch/avr32/kernel/signal.c
arch/avr32/mm/dma-coherent.c
arch/cris/mm/fault.c
arch/frv/kernel/futex.c
arch/frv/kernel/setup.c
arch/frv/kernel/signal.c
arch/frv/mm/fault.c
arch/frv/mm/pgalloc.c
arch/h8300/kernel/setup.c
arch/h8300/kernel/signal.c
arch/h8300/kernel/vmlinux.lds.S
arch/i386/Kconfig
arch/i386/Kconfig.cpu
arch/i386/Kconfig.debug
arch/i386/Makefile
arch/i386/Makefile.cpu
arch/i386/boot/compressed/Makefile
arch/i386/boot/compressed/head.S
arch/i386/boot/compressed/misc.c
arch/i386/boot/compressed/relocs.c [new file with mode: 0644]
arch/i386/boot/compressed/vmlinux.lds [new file with mode: 0644]
arch/i386/boot/compressed/vmlinux.scr
arch/i386/boot/setup.S
arch/i386/defconfig
arch/i386/kernel/Makefile
arch/i386/kernel/acpi/cstate.c
arch/i386/kernel/acpi/earlyquirk.c
arch/i386/kernel/alternative.c
arch/i386/kernel/apic.c
arch/i386/kernel/apm.c
arch/i386/kernel/asm-offsets.c
arch/i386/kernel/cpu/amd.c
arch/i386/kernel/cpu/common.c
arch/i386/kernel/cpu/intel.c
arch/i386/kernel/cpu/intel_cacheinfo.c
arch/i386/kernel/cpu/mcheck/therm_throt.c
arch/i386/kernel/cpu/mtrr/Makefile
arch/i386/kernel/cpu/mtrr/amd.c
arch/i386/kernel/cpu/mtrr/centaur.c
arch/i386/kernel/cpu/mtrr/cyrix.c
arch/i386/kernel/cpu/mtrr/generic.c
arch/i386/kernel/cpu/mtrr/if.c
arch/i386/kernel/cpu/mtrr/main.c
arch/i386/kernel/cpu/mtrr/mtrr.h
arch/i386/kernel/cpu/proc.c
arch/i386/kernel/cpuid.c
arch/i386/kernel/crash.c
arch/i386/kernel/e820.c [new file with mode: 0644]
arch/i386/kernel/efi.c
arch/i386/kernel/entry.S
arch/i386/kernel/head.S
arch/i386/kernel/hpet.c
arch/i386/kernel/i8259.c
arch/i386/kernel/io_apic.c
arch/i386/kernel/kprobes.c
arch/i386/kernel/ldt.c
arch/i386/kernel/mca.c
arch/i386/kernel/microcode.c
arch/i386/kernel/module.c
arch/i386/kernel/mpparse.c
arch/i386/kernel/msr.c
arch/i386/kernel/nmi.c
arch/i386/kernel/paravirt.c [new file with mode: 0644]
arch/i386/kernel/pci-dma.c
arch/i386/kernel/process.c
arch/i386/kernel/ptrace.c
arch/i386/kernel/quirks.c
arch/i386/kernel/reboot.c
arch/i386/kernel/setup.c
arch/i386/kernel/signal.c
arch/i386/kernel/smp.c
arch/i386/kernel/smpboot.c
arch/i386/kernel/sysenter.c
arch/i386/kernel/time.c
arch/i386/kernel/time_hpet.c
arch/i386/kernel/topology.c
arch/i386/kernel/traps.c
arch/i386/kernel/tsc.c
arch/i386/kernel/vm86.c
arch/i386/kernel/vmlinux.lds.S
arch/i386/mach-generic/probe.c
arch/i386/mach-voyager/voyager_cat.c
arch/i386/mach-voyager/voyager_smp.c
arch/i386/math-emu/fpu_emu.h
arch/i386/math-emu/fpu_entry.c
arch/i386/math-emu/fpu_system.h
arch/i386/math-emu/load_store.c
arch/i386/math-emu/reg_ld_str.c
arch/i386/mm/boot_ioremap.c
arch/i386/mm/discontig.c
arch/i386/mm/fault.c
arch/i386/mm/highmem.c
arch/i386/mm/hugetlbpage.c
arch/i386/mm/init.c
arch/i386/mm/pageattr.c
arch/i386/mm/pgtable.c
arch/i386/pci/early.c
arch/i386/pci/irq.c
arch/i386/pci/pcbios.c
arch/i386/power/Makefile
arch/i386/power/cpu.c
arch/i386/power/suspend.c [new file with mode: 0644]
arch/i386/power/swsusp.S
arch/ia64/ia32/binfmt_elf32.c
arch/ia64/ia32/ia32_support.c
arch/ia64/ia32/ia32priv.h
arch/ia64/ia32/sys_ia32.c
arch/ia64/kernel/kprobes.c
arch/ia64/kernel/palinfo.c
arch/ia64/kernel/perfmon.c
arch/ia64/kernel/salinfo.c
arch/ia64/kernel/topology.c
arch/ia64/mm/hugetlbpage.c
arch/ia64/mm/init.c
arch/m32r/kernel/setup.c
arch/m32r/kernel/signal.c
arch/m32r/mm/discontig.c
arch/m68k/amiga/chipram.c
arch/m68k/atari/hades-pci.c
arch/m68k/mm/fault.c
arch/m68knommu/kernel/vmlinux.lds.S
arch/mips/kernel/binfmt_elfn32.c
arch/mips/kernel/binfmt_elfo32.c
arch/mips/kernel/irixelf.c
arch/mips/mm/dma-coherent.c
arch/mips/mm/dma-ip27.c
arch/mips/mm/dma-ip32.c
arch/mips/mm/dma-noncoherent.c
arch/mips/mm/highmem.c
arch/parisc/kernel/binfmt_elf32.c
arch/parisc/mm/fault.c
arch/powerpc/kernel/crash.c
arch/powerpc/kernel/kprobes.c
arch/powerpc/kernel/rtas_flash.c
arch/powerpc/kernel/signal_32.c
arch/powerpc/kernel/sysfs.c
arch/powerpc/kernel/vdso.c
arch/powerpc/kernel/vmlinux.lds.S
arch/powerpc/mm/hugetlbpage.c
arch/powerpc/mm/init_64.c
arch/powerpc/platforms/cell/spufs/inode.c
arch/ppc/kernel/vmlinux.lds.S
arch/s390/appldata/appldata_base.c
arch/s390/kernel/binfmt_elf32.c
arch/s390/kernel/kprobes.c
arch/s390/lib/uaccess_std.c
arch/sh/kernel/cpu/sh4/sq.c
arch/sh/kernel/setup.c
arch/sh/kernel/sh_ksyms.c
arch/sh/kernel/signal.c
arch/sh/kernel/vsyscall/vsyscall.c
arch/sh/mm/hugetlbpage.c
arch/sh/mm/pmb.c
arch/sh64/kernel/setup.c
arch/sh64/kernel/signal.c
arch/sh64/mm/fault.c
arch/sh64/mm/hugetlbpage.c
arch/sparc/kernel/vmlinux.lds.S
arch/sparc/mm/highmem.c
arch/sparc64/kernel/binfmt_elf32.c
arch/sparc64/kernel/vmlinux.lds.S
arch/sparc64/mm/hugetlbpage.c
arch/sparc64/mm/init.c
arch/sparc64/mm/tsb.c
arch/um/drivers/daemon_kern.c
arch/um/drivers/line.c
arch/um/drivers/mcast_kern.c
arch/um/drivers/pcap_kern.c
arch/um/drivers/slip_kern.c
arch/um/drivers/slirp_kern.c
arch/um/include/chan_kern.h
arch/um/include/line.h
arch/um/include/sysdep-i386/ptrace.h
arch/um/include/sysdep-i386/stub.h
arch/um/include/sysdep-x86_64/ptrace.h
arch/um/os-Linux/drivers/ethertap_kern.c
arch/um/os-Linux/drivers/tuntap_kern.c
arch/um/sys-i386/ldt.c
arch/um/sys-i386/ptrace_user.c
arch/um/sys-i386/user-offsets.c
arch/v850/kernel/vmlinux.lds.S
arch/x86_64/Kconfig
arch/x86_64/Makefile
arch/x86_64/defconfig
arch/x86_64/ia32/ia32_binfmt.c
arch/x86_64/ia32/ia32_signal.c
arch/x86_64/ia32/syscall32.c
arch/x86_64/kernel/apic.c
arch/x86_64/kernel/crash.c
arch/x86_64/kernel/early-quirks.c
arch/x86_64/kernel/entry.S
arch/x86_64/kernel/genapic.c
arch/x86_64/kernel/head64.c
arch/x86_64/kernel/i387.c
arch/x86_64/kernel/i8259.c
arch/x86_64/kernel/io_apic.c
arch/x86_64/kernel/irq.c
arch/x86_64/kernel/kprobes.c
arch/x86_64/kernel/mce.c
arch/x86_64/kernel/mce_amd.c
arch/x86_64/kernel/mpparse.c
arch/x86_64/kernel/nmi.c
arch/x86_64/kernel/pci-calgary.c
arch/x86_64/kernel/pci-dma.c
arch/x86_64/kernel/pci-gart.c
arch/x86_64/kernel/process.c
arch/x86_64/kernel/setup.c
arch/x86_64/kernel/smp.c
arch/x86_64/kernel/smpboot.c
arch/x86_64/kernel/traps.c
arch/x86_64/kernel/vmlinux.lds.S
arch/x86_64/kernel/vsyscall.c
arch/x86_64/lib/csum-partial.c
arch/x86_64/lib/delay.c
arch/x86_64/mm/fault.c
arch/x86_64/mm/init.c
arch/x86_64/mm/pageattr.c
block/blktrace.c
block/cfq-iosched.c
block/ll_rw_blk.c
drivers/atm/he.c
drivers/base/core.c
drivers/base/cpu.c
drivers/base/dmapool.c
drivers/base/memory.c
drivers/base/topology.c
drivers/block/DAC960.c
drivers/block/Kconfig
drivers/block/aoe/aoeblk.c
drivers/block/cciss.c
drivers/block/cciss.h
drivers/block/cciss_cmd.h
drivers/block/nbd.c
drivers/block/paride/aten.c
drivers/block/paride/bpck.c
drivers/block/paride/bpck6.c
drivers/block/paride/comm.c
drivers/block/paride/dstr.c
drivers/block/paride/epat.c
drivers/block/paride/epia.c
drivers/block/paride/fit2.c
drivers/block/paride/fit3.c
drivers/block/paride/friq.c
drivers/block/paride/frpw.c
drivers/block/paride/jumbo [deleted file]
drivers/block/paride/kbic.c
drivers/block/paride/ktti.c
drivers/block/paride/on20.c
drivers/block/paride/on26.c
drivers/block/paride/paride.c
drivers/block/paride/paride.h
drivers/block/paride/pcd.c
drivers/block/paride/pf.c
drivers/block/paride/pg.c
drivers/block/paride/pt.c
drivers/block/pktcdvd.c
drivers/bluetooth/hci_bcsp.c
drivers/cdrom/optcd.c
drivers/cdrom/sbpcd.c
drivers/char/agp/amd64-agp.c
drivers/char/decserial.c
drivers/char/drm/drm_sman.c
drivers/char/drm/drm_vm.c
drivers/char/hvc_console.c
drivers/char/hvcs.c
drivers/char/hw_random/Kconfig
drivers/char/hw_random/Makefile
drivers/char/ip2/i2cmd.h
drivers/char/ip2/i2lib.c
drivers/char/ipmi/ipmi_bt_sm.c
drivers/char/ipmi/ipmi_devintf.c
drivers/char/ipmi/ipmi_kcs_sm.c
drivers/char/ipmi/ipmi_msghandler.c
drivers/char/ipmi/ipmi_poweroff.c
drivers/char/ipmi/ipmi_si_intf.c
drivers/char/ipmi/ipmi_smic_sm.c
drivers/char/ipmi/ipmi_watchdog.c
drivers/char/istallion.c
drivers/char/misc.c
drivers/char/mmtimer.c
drivers/char/moxa.c
drivers/char/pcmcia/synclink_cs.c
drivers/char/rio/rio_linux.c
drivers/char/riscom8.c
drivers/char/synclink.c
drivers/char/synclink_gt.c
drivers/char/synclinkmp.c
drivers/char/sysrq.c
drivers/char/toshiba.c
drivers/char/tpm/tpm.c
drivers/char/vt.c
drivers/char/watchdog/pcwd_usb.c
drivers/cpufreq/cpufreq.c
drivers/dma/ioatdma.c
drivers/edac/edac_mc.c
drivers/ide/Kconfig
drivers/ide/ide.c
drivers/ide/pci/via82cxxx.c
drivers/ieee1394/eth1394.c
drivers/ieee1394/hosts.c
drivers/ieee1394/nodemgr.c
drivers/ieee1394/ohci1394.c
drivers/ieee1394/pcilynx.c
drivers/ieee1394/raw1394.c
drivers/infiniband/hw/amso1100/c2_vq.c
drivers/infiniband/hw/ehca/ehca_av.c
drivers/infiniband/hw/ehca/ehca_cq.c
drivers/infiniband/hw/ehca/ehca_main.c
drivers/infiniband/hw/ehca/ehca_mrmw.c
drivers/infiniband/hw/ehca/ehca_pd.c
drivers/infiniband/hw/ehca/ehca_qp.c
drivers/infiniband/hw/mthca/mthca_av.c
drivers/input/gameport/gameport.c
drivers/input/misc/hp_sdc_rtc.c
drivers/input/serio/serio.c
drivers/input/touchscreen/ads7846.c
drivers/isdn/gigaset/bas-gigaset.c
drivers/isdn/gigaset/usb-gigaset.c
drivers/isdn/hisax/isdnhdlc.h
drivers/leds/Kconfig
drivers/leds/Makefile
drivers/leds/leds-wrap.c [new file with mode: 0644]
drivers/macintosh/apm_emu.c
drivers/macintosh/therm_adt746x.c
drivers/macintosh/via-pmu.c
drivers/macintosh/windfarm_core.c
drivers/md/dm-crypt.c
drivers/md/dm-mpath.c
drivers/md/dm-snap.c
drivers/md/dm.c
drivers/md/kcopyd.c
drivers/md/md.c
drivers/md/raid5.c
drivers/media/dvb/cinergyT2/cinergyT2.c
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/dvb-usb/usb-urb.c
drivers/media/dvb/frontends/l64781.c
drivers/media/dvb/ttusb-dec/ttusb_dec.c
drivers/media/radio/Kconfig
drivers/media/video/msp3400-driver.c
drivers/media/video/tvaudio.c
drivers/media/video/video-buf-dvb.c
drivers/media/video/vivi.c
drivers/message/fusion/mptbase.c
drivers/message/fusion/mptfc.c
drivers/message/fusion/mptscsih.c
drivers/message/fusion/mptspi.c
drivers/message/i2o/bus-osm.c
drivers/message/i2o/device.c
drivers/message/i2o/driver.c
drivers/message/i2o/exec-osm.c
drivers/message/i2o/i2o_block.c
drivers/message/i2o/i2o_block.h
drivers/message/i2o/i2o_config.c
drivers/message/i2o/i2o_proc.c
drivers/message/i2o/i2o_scsi.c
drivers/message/i2o/pci.c
drivers/mfd/ucb1x00-ts.c
drivers/misc/tifm_core.c
drivers/mtd/devices/m25p80.c
drivers/net/de600.c
drivers/net/irda/stir4200.c
drivers/net/lasi_82596.c
drivers/net/wireless/airo.c
drivers/parport/parport_pc.c
drivers/pci/msi.c
drivers/pci/probe.c
drivers/pcmcia/cs.c
drivers/pnp/card.c
drivers/pnp/interface.c
drivers/pnp/pnpbios/core.c
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-ds1672.c
drivers/rtc/rtc-ds1742.c
drivers/rtc/rtc-omap.c [new file with mode: 0644]
drivers/rtc/rtc-rs5c372.c
drivers/rtc/rtc-test.c
drivers/rtc/rtc-x1205.c
drivers/s390/block/dasd_devmap.c
drivers/s390/block/dasd_eckd.c
drivers/s390/block/dasd_fba.c
drivers/s390/block/dasd_int.h
drivers/s390/scsi/zfcp_def.h
drivers/s390/scsi/zfcp_fsf.c
drivers/scsi/53c700.c
drivers/scsi/53c700.h
drivers/scsi/aic94xx/aic94xx.h
drivers/scsi/aic94xx/aic94xx_hwi.c
drivers/scsi/aic94xx/aic94xx_init.c
drivers/scsi/ide-scsi.c
drivers/scsi/ipr.c
drivers/scsi/libsas/sas_init.c
drivers/scsi/qla2xxx/qla_os.c
drivers/scsi/qla4xxx/ql4_os.c
drivers/scsi/scsi.c
drivers/scsi/scsi_lib.c
drivers/scsi/scsi_tgt_lib.c
drivers/serial/8250_exar_st16c554.c [new file with mode: 0644]
drivers/serial/8250_pnp.c
drivers/serial/Kconfig
drivers/serial/Makefile
drivers/serial/amba-pl010.c
drivers/serial/dz.c
drivers/serial/dz.h
drivers/serial/mpsc.c
drivers/serial/uartlite.c [new file with mode: 0644]
drivers/spi/spi.c
drivers/spi/spi_bitbang.c
drivers/spi/spi_butterfly.c
drivers/usb/atm/ueagle-atm.c
drivers/usb/core/buffer.c
drivers/usb/core/hub.c
drivers/usb/core/message.c
drivers/usb/gadget/file_storage.c
drivers/usb/gadget/gmidi.c
drivers/usb/gadget/goku_udc.c
drivers/usb/gadget/inode.c
drivers/usb/gadget/net2280.c
drivers/usb/gadget/omap_udc.c
drivers/usb/gadget/zero.c
drivers/usb/host/ehci-dbg.c
drivers/usb/host/hc_crisv10.c
drivers/usb/host/ohci-dbg.c
drivers/usb/host/ohci-pnx4008.c
drivers/usb/host/uhci-hcd.c
drivers/usb/host/uhci-q.c
drivers/usb/input/acecad.c
drivers/usb/input/aiptek.c
drivers/usb/input/ati_remote.c
drivers/usb/input/hid-core.c
drivers/usb/input/keyspan_remote.c
drivers/usb/input/mtouchusb.c
drivers/usb/input/powermate.c
drivers/usb/input/touchkitusb.c
drivers/usb/input/usbkbd.c
drivers/usb/input/usbmouse.c
drivers/usb/input/usbtouchscreen.c
drivers/usb/input/xpad.c
drivers/usb/input/yealink.c
drivers/usb/misc/phidgetkit.c
drivers/usb/misc/phidgetmotorcontrol.c
drivers/usb/misc/usbtest.c
drivers/usb/mon/mon_text.c
drivers/usb/net/catc.c
drivers/usb/net/net1080.c
drivers/usb/net/pegasus.c
drivers/usb/net/rndis_host.c
drivers/usb/net/rtl8150.c
drivers/usb/net/usbnet.c
drivers/usb/serial/mos7720.c
drivers/usb/serial/mos7840.c
drivers/usb/storage/onetouch.c
drivers/usb/storage/transport.c
drivers/usb/storage/usb.c
drivers/video/geode/gxfb_core.c
drivers/w1/Makefile
drivers/w1/slaves/Makefile
drivers/w1/slaves/w1_ds2433.c
drivers/w1/w1.c
fs/9p/vfs_inode.c
fs/adfs/super.c
fs/affs/amigaffs.c
fs/affs/bitmap.c
fs/affs/super.c
fs/afs/kafsasyncd.c
fs/afs/kafstimod.c
fs/afs/server.c
fs/afs/super.c
fs/aio.c
fs/autofs/inode.c
fs/autofs4/inode.c
fs/befs/linuxvfs.c
fs/bfs/inode.c
fs/binfmt_elf.c
fs/binfmt_elf_fdpic.c
fs/bio.c
fs/block_dev.c
fs/buffer.c
fs/cifs/cifsfs.c
fs/cifs/connect.c
fs/cifs/misc.c
fs/cifs/transport.c
fs/coda/inode.c
fs/compat.c
fs/compat_ioctl.c
fs/configfs/configfs_internal.h
fs/configfs/mount.c
fs/cramfs/inode.c
fs/dcache.c
fs/dcookies.c
fs/dlm/memory.c
fs/dnotify.c
fs/dquot.c
fs/ecryptfs/crypto.c
fs/ecryptfs/file.c
fs/ecryptfs/inode.c
fs/ecryptfs/keystore.c
fs/ecryptfs/main.c
fs/ecryptfs/super.c
fs/efs/super.c
fs/eventpoll.c
fs/exec.c
fs/ext2/ioctl.c
fs/ext2/super.c
fs/ext2/xattr.c
fs/ext3/Makefile
fs/ext3/balloc.c
fs/ext3/dir.c
fs/ext3/ext3_jbd.c [new file with mode: 0644]
fs/ext3/inode.c
fs/ext3/namei.c
fs/ext3/super.c
fs/ext3/xattr.c
fs/ext4/Makefile
fs/ext4/balloc.c
fs/ext4/dir.c
fs/ext4/ext4_jbd2.c [new file with mode: 0644]
fs/ext4/extents.c
fs/ext4/inode.c
fs/ext4/namei.c
fs/ext4/super.c
fs/ext4/xattr.c
fs/fat/cache.c
fs/fat/inode.c
fs/fcntl.c
fs/file.c
fs/freevxfs/vxfs_inode.c
fs/fuse/dev.c
fs/fuse/dir.c
fs/fuse/file.c
fs/fuse/fuse_i.h
fs/fuse/inode.c
fs/gfs2/main.c
fs/gfs2/util.c
fs/gfs2/util.h
fs/hfs/super.c
fs/hfsplus/super.c
fs/hpfs/dir.c
fs/hpfs/dnode.c
fs/hpfs/ea.c
fs/hpfs/hpfs_fn.h
fs/hpfs/inode.c
fs/hpfs/map.c
fs/hpfs/super.c
fs/hugetlbfs/inode.c
fs/inode.c
fs/inotify_user.c
fs/isofs/inode.c
fs/jbd/journal.c
fs/jbd/revoke.c
fs/jbd/transaction.c
fs/jbd2/commit.c
fs/jbd2/journal.c
fs/jbd2/revoke.c
fs/jbd2/transaction.c
fs/jffs/inode-v23.c
fs/jffs/intrep.c
fs/jffs/jffs_fm.c
fs/jffs2/background.c
fs/jffs2/malloc.c
fs/jffs2/super.c
fs/jfs/jfs_logmgr.c
fs/jfs/jfs_metapage.c
fs/jfs/jfs_txnmgr.c
fs/jfs/super.c
fs/lockd/clntproc.c
fs/lockd/host.c
fs/locks.c
fs/mbcache.c
fs/minix/inode.c
fs/namei.c
fs/namespace.c
fs/ncpfs/inode.c
fs/nfs/direct.c
fs/nfs/inode.c
fs/nfs/pagelist.c
fs/nfs/read.c
fs/nfs/write.c
fs/nfsd/nfs3xdr.c
fs/nfsd/nfs4state.c
fs/nfsd/nfsxdr.c
fs/nls/nls_cp936.c
fs/ntfs/attrib.c
fs/ntfs/index.c
fs/ntfs/inode.c
fs/ntfs/unistr.c
fs/ocfs2/dlm/dlmfs.c
fs/ocfs2/dlm/dlmmaster.c
fs/ocfs2/extent_map.c
fs/ocfs2/inode.h
fs/ocfs2/super.c
fs/ocfs2/uptodate.c
fs/openpromfs/inode.c
fs/partitions/amiga.c
fs/partitions/atari.c
fs/partitions/check.c
fs/partitions/ibm.c
fs/pipe.c
fs/proc/Makefile
fs/proc/base.c
fs/proc/inode.c
fs/proc/kcore.c
fs/proc/proc_misc.c
fs/qnx4/inode.c
fs/reiserfs/file.c
fs/reiserfs/inode.c
fs/reiserfs/super.c
fs/romfs/inode.c
fs/seq_file.c
fs/smbfs/inode.c
fs/smbfs/request.c
fs/stat.c
fs/sysfs/mount.c
fs/sysfs/sysfs.h
fs/sysv/CHANGES [deleted file]
fs/sysv/ChangeLog [deleted file]
fs/sysv/INTRO [deleted file]
fs/sysv/inode.c
fs/udf/super.c
fs/ufs/super.c
fs/ufs/util.h
fs/xfs/linux-2.6/xfs_buf.c
fs/xfs/linux-2.6/xfs_super.c
include/acpi/platform/aclinux.h
include/asm-alpha/dma-mapping.h
include/asm-alpha/unistd.h
include/asm-arm/dma-mapping.h
include/asm-arm/setup.h
include/asm-arm/unistd.h
include/asm-arm26/pgalloc.h
include/asm-arm26/setup.h
include/asm-arm26/unistd.h
include/asm-avr32/dma-mapping.h
include/asm-avr32/setup.h
include/asm-cris/arch-v10/bitops.h
include/asm-cris/dma-mapping.h
include/asm-cris/semaphore-helper.h
include/asm-frv/dma-mapping.h
include/asm-frv/highmem.h
include/asm-frv/param.h
include/asm-frv/setup.h
include/asm-frv/unistd.h
include/asm-generic/Kbuild
include/asm-generic/Kbuild.asm
include/asm-generic/atomic.h
include/asm-generic/dma-mapping.h
include/asm-generic/futex.h
include/asm-generic/vmlinux.lds.h
include/asm-h8300/delay.h
include/asm-h8300/mmu_context.h
include/asm-h8300/pci.h
include/asm-h8300/tlbflush.h
include/asm-h8300/unistd.h
include/asm-i386/Kbuild
include/asm-i386/alternative.h
include/asm-i386/apic.h
include/asm-i386/atomic.h
include/asm-i386/boot.h
include/asm-i386/bugs.h
include/asm-i386/cpu.h
include/asm-i386/cpufeature.h
include/asm-i386/current.h
include/asm-i386/delay.h
include/asm-i386/desc.h
include/asm-i386/dma-mapping.h
include/asm-i386/e820.h
include/asm-i386/elf.h
include/asm-i386/futex.h
include/asm-i386/genapic.h
include/asm-i386/i387.h
include/asm-i386/io.h
include/asm-i386/irq.h
include/asm-i386/irq_regs.h
include/asm-i386/irqflags.h
include/asm-i386/mach-default/setup_arch.h
include/asm-i386/math_emu.h
include/asm-i386/mmu_context.h
include/asm-i386/mmzone.h
include/asm-i386/module.h
include/asm-i386/mpspec_def.h
include/asm-i386/msr.h
include/asm-i386/nmi.h
include/asm-i386/page.h
include/asm-i386/param.h
include/asm-i386/paravirt.h [new file with mode: 0644]
include/asm-i386/pda.h [new file with mode: 0644]
include/asm-i386/percpu.h
include/asm-i386/pgtable-2level.h
include/asm-i386/pgtable-3level.h
include/asm-i386/pgtable.h
include/asm-i386/processor.h
include/asm-i386/ptrace.h
include/asm-i386/rwsem.h
include/asm-i386/segment.h
include/asm-i386/setup.h
include/asm-i386/smp.h
include/asm-i386/spinlock.h
include/asm-i386/suspend.h
include/asm-i386/system.h
include/asm-i386/thread_info.h
include/asm-i386/time.h [new file with mode: 0644]
include/asm-i386/tlbflush.h
include/asm-i386/unistd.h
include/asm-i386/unwind.h
include/asm-i386/vm86.h
include/asm-ia64/Kbuild
include/asm-ia64/dma-mapping.h
include/asm-ia64/futex.h
include/asm-ia64/pgalloc.h
include/asm-m32r/setup.h
include/asm-m32r/unistd.h
include/asm-m68k/dma-mapping.h
include/asm-m68k/setup.h
include/asm-m68k/unistd.h
include/asm-m68knommu/setup.h
include/asm-m68knommu/unistd.h
include/asm-mips/dma-mapping.h
include/asm-mips/futex.h
include/asm-mips/highmem.h
include/asm-mips/setup.h
include/asm-mips/unistd.h
include/asm-parisc/dma-mapping.h
include/asm-parisc/futex.h
include/asm-powerpc/dma-mapping.h
include/asm-powerpc/elf.h
include/asm-powerpc/futex.h
include/asm-powerpc/pgalloc.h
include/asm-powerpc/setup.h
include/asm-powerpc/unistd.h
include/asm-ppc/highmem.h
include/asm-s390/setup.h
include/asm-s390/unistd.h
include/asm-sh/dma-mapping.h
include/asm-sh/setup.h
include/asm-sh/unistd.h
include/asm-sh64/dma-mapping.h
include/asm-sh64/setup.h
include/asm-sh64/unistd.h
include/asm-sparc/unistd.h
include/asm-sparc64/dma-mapping.h
include/asm-sparc64/futex.h
include/asm-sparc64/pgalloc.h
include/asm-sparc64/unistd.h
include/asm-um/dma-mapping.h
include/asm-v850/irq.h
include/asm-v850/unistd.h
include/asm-x86_64/Kbuild
include/asm-x86_64/alternative.h
include/asm-x86_64/atomic.h
include/asm-x86_64/calgary.h
include/asm-x86_64/cpufeature.h
include/asm-x86_64/delay.h
include/asm-x86_64/desc.h
include/asm-x86_64/desc_defs.h [new file with mode: 0644]
include/asm-x86_64/dma-mapping.h
include/asm-x86_64/futex.h
include/asm-x86_64/genapic.h
include/asm-x86_64/msr.h
include/asm-x86_64/nmi.h
include/asm-x86_64/pci-direct.h
include/asm-x86_64/pgtable.h
include/asm-x86_64/processor.h
include/asm-x86_64/proto.h
include/asm-x86_64/rio.h [new file with mode: 0644]
include/asm-x86_64/smp.h
include/asm-x86_64/spinlock.h
include/asm-x86_64/stacktrace.h
include/asm-x86_64/unistd.h
include/asm-x86_64/unwind.h
include/asm-x86_64/vsyscall.h
include/asm-xtensa/dma-mapping.h
include/asm-xtensa/unistd.h
include/linux/Kbuild
include/linux/aio.h
include/linux/bootmem.h
include/linux/bottom_half.h [new file with mode: 0644]
include/linux/carta_random32.h [deleted file]
include/linux/cciss_ioctl.h
include/linux/cdev.h
include/linux/cpu.h
include/linux/cpuset.h
include/linux/debug_locks.h
include/linux/delayacct.h
include/linux/device.h
include/linux/efi.h
include/linux/elf.h
include/linux/ext3_jbd.h
include/linux/ext4_jbd2.h
include/linux/file.h
include/linux/freezer.h [new file with mode: 0644]
include/linux/fs.h
include/linux/fs_struct.h
include/linux/fuse.h
include/linux/gfp.h
include/linux/highmem.h
include/linux/hugetlb.h
include/linux/i2o.h
include/linux/init_task.h
include/linux/interrupt.h
include/linux/ipmi.h
include/linux/ipmi_msgdefs.h
include/linux/ipmi_smi.h
include/linux/jbd.h
include/linux/jbd2.h
include/linux/kexec.h
include/linux/kprobes.h
include/linux/ktime.h
include/linux/lockd/lockd.h
include/linux/lockdep.h
include/linux/mm.h
include/linux/mmzone.h
include/linux/moduleparam.h
include/linux/msg.h
include/linux/mutex.h
include/linux/nbd.h
include/linux/nmi.h
include/linux/pci_ids.h
include/linux/profile.h
include/linux/quotaops.h
include/linux/radix-tree.h
include/linux/raid/raid5.h
include/linux/reiserfs_fs.h
include/linux/relay.h
include/linux/rmap.h
include/linux/rtmutex.h
include/linux/rwsem-spinlock.h
include/linux/sched.h
include/linux/screen_info.h
include/linux/seq_file.h
include/linux/serial_8250.h
include/linux/serial_core.h
include/linux/signal.h
include/linux/skbuff.h
include/linux/slab.h
include/linux/smp.h
include/linux/spinlock.h
include/linux/start_kernel.h [new file with mode: 0644]
include/linux/sunrpc/sched.h
include/linux/suspend.h
include/linux/swap.h
include/linux/taskstats_kern.h
include/linux/uaccess.h
include/linux/workqueue.h
include/net/dst.h
include/net/inet_hashtables.h
include/net/neighbour.h
include/net/netfilter/nf_conntrack_expect.h
include/net/request_sock.h
include/net/sock.h
include/net/timewait_sock.h
include/scsi/libsas.h
init/do_mounts_initrd.c
init/initramfs.c
init/main.c
ipc/compat.c
ipc/mqueue.c
ipc/msg.c
ipc/sem.c
kernel/Kconfig.hz
kernel/acct.c
kernel/audit.c
kernel/auditfilter.c
kernel/configs.c
kernel/cpu.c
kernel/cpuset.c
kernel/delayacct.c
kernel/dma.c
kernel/exit.c
kernel/fork.c
kernel/futex.c
kernel/irq/handle.c
kernel/kallsyms.c
kernel/kexec.c
kernel/kprobes.c
kernel/lockdep.c
kernel/lockdep_internals.h
kernel/lockdep_proc.c
kernel/module.c
kernel/mutex-debug.c
kernel/pid.c
kernel/posix-timers.c
kernel/power/Kconfig
kernel/power/disk.c
kernel/power/main.c
kernel/power/power.h
kernel/power/process.c
kernel/power/snapshot.c
kernel/power/swap.c
kernel/power/swsusp.c
kernel/power/user.c
kernel/printk.c
kernel/profile.c
kernel/rcupdate.c
kernel/rcutorture.c
kernel/relay.c
kernel/resource.c
kernel/rtmutex-tester.c
kernel/sched.c
kernel/signal.c
kernel/softirq.c
kernel/sys.c
kernel/sysctl.c
kernel/taskstats.c
kernel/unwind.c
kernel/user.c
kernel/workqueue.c
lib/Kconfig.debug
lib/Makefile
lib/cmdline.c
lib/idr.c
lib/kobject.c
lib/list_debug.c
lib/locking-selftest.c
lib/radix-tree.c
lib/spinlock_debug.c
mm/allocpercpu.c
mm/bootmem.c
mm/filemap.c
mm/fremap.c
mm/hugetlb.c
mm/memory.c
mm/memory_hotplug.c
mm/mempolicy.c
mm/migrate.c
mm/mlock.c
mm/mmap.c
mm/mmzone.c
mm/nommu.c
mm/oom_kill.c
mm/page_alloc.c
mm/page_io.c
mm/pdflush.c
mm/readahead.c
mm/shmem.c
mm/slab.c
mm/sparse.c
mm/swap.c
mm/swapfile.c
mm/thrash.c
mm/vmscan.c
mm/vmstat.c
net/bridge/br_fdb.c
net/core/dev.c
net/core/dst.c
net/core/flow.c
net/core/neighbour.c
net/core/skbuff.c
net/core/sock.c
net/dccp/ackvec.c
net/dccp/ccid.c
net/dccp/ccid.h
net/dccp/ccids/ccid3.c
net/dccp/ccids/lib/loss_interval.c
net/dccp/ccids/lib/loss_interval.h
net/dccp/ccids/lib/packet_history.h
net/decnet/dn_table.c
net/ipv4/fib_hash.c
net/ipv4/fib_trie.c
net/ipv4/inet_hashtables.c
net/ipv4/inet_timewait_sock.c
net/ipv4/inetpeer.c
net/ipv4/ipmr.c
net/ipv4/ipvs/ip_vs_conn.c
net/ipv4/netfilter/ip_conntrack_core.c
net/ipv6/af_inet6.c
net/ipv6/ip6_fib.c
net/ipv6/xfrm6_tunnel.c
net/netfilter/nf_conntrack_core.c
net/netfilter/nf_conntrack_expect.c
net/netfilter/xt_hashlimit.c
net/rxrpc/krxiod.c
net/rxrpc/krxsecd.c
net/rxrpc/krxtimod.c
net/sctp/protocol.c
net/sctp/sm_make_chunk.c
net/sctp/socket.c
net/socket.c
net/sunrpc/rpc_pipe.c
net/sunrpc/sched.c
net/sunrpc/svcauth.c
net/sunrpc/svcsock.c
net/sunrpc/xprtsock.c
net/tipc/handler.c
net/xfrm/xfrm_input.c
net/xfrm/xfrm_policy.c
scripts/kallsyms.c
scripts/kconfig/qconf.cc
scripts/kernel-doc
scripts/mod/modpost.c
scripts/ver_linux
security/keys/key.c
security/keys/keyring.c
security/keys/process_keys.c
security/selinux/avc.c
security/selinux/hooks.c
security/selinux/ss/avtab.c
sound/arm/sa11xx-uda1341.c
sound/core/pcm_native.c
sound/oss/Kconfig
sound/oss/btaudio.c
sound/oss/emu10k1/audio.c
sound/oss/emu10k1/cardwi.c
sound/oss/emu10k1/cardwi.h
sound/oss/emu10k1/passthrough.c
sound/oss/via82cxxx_audio.c
sound/usb/usx2y/usX2Yhwdep.c

index 05431621c861d7b9f0228a228414beb3fb3ee52e..805db4b2cba65b65bd966f054c71ca13427f9287 100644 (file)
@@ -77,7 +77,7 @@ To get this part of the dma_ API, you must #include <linux/dmapool.h>
 Many drivers need lots of small dma-coherent memory regions for DMA
 descriptors or I/O buffers.  Rather than allocating in units of a page
 or more using dma_alloc_coherent(), you can use DMA pools.  These work
-much like a kmem_cache_t, except that they use the dma-coherent allocator
+much like a struct kmem_cache, except that they use the dma-coherent allocator
 not __get_free_pages().  Also, they understand common hardware constraints
 for alignment, like queue heads needing to be aligned on N byte boundaries.
 
@@ -94,7 +94,7 @@ The pool create() routines initialize a pool of dma-coherent buffers
 for use with a given device.  It must be called in a context which
 can sleep.
 
-The "name" is for diagnostics (like a kmem_cache_t name); dev and size
+The "name" is for diagnostics (like a struct kmem_cache name); dev and size
 are like what you'd pass to dma_alloc_coherent().  The device's hardware
 alignment requirement for this type of data is "align" (which is expressed
 in bytes, and must be a power of two).  If your device has no boundary
@@ -431,10 +431,10 @@ be identical to those passed in (and returned by
 dma_alloc_noncoherent()).
 
 int
-dma_is_consistent(dma_addr_t dma_handle)
+dma_is_consistent(struct device *dev, dma_addr_t dma_handle)
 
-returns true if the memory pointed to by the dma_handle is actually
-consistent.
+returns true if the device dev is performing consistent DMA on the memory
+area pointed to by the dma_handle.
 
 int
 dma_get_cache_alignment(void)
@@ -459,7 +459,7 @@ anything like this.  You must also be extra careful about accessing
 memory you intend to sync partially.
 
 void
-dma_cache_sync(void *vaddr, size_t size,
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
               enum dma_data_direction direction)
 
 Do a partial sync of memory that was allocated by
index a166675c4303150c7be6111f917b0f2bcd422998..ca094913c5555fc99caeadf5b964d0d6e0195de0 100644 (file)
@@ -418,9 +418,35 @@ X!Edrivers/pnp/system.c
 !Idrivers/parport/daisy.c
   </chapter>
 
-  <chapter id="viddev">
-     <title>Video4Linux</title>
-!Edrivers/media/video/videodev.c
+  <chapter id="message_devices">
+       <title>Message-based devices</title>
+     <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+     </sect1>
+     <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+     </sect1>
   </chapter>
 
   <chapter id="snddev">
index 0e3924ecd76b4e9b197348d656712fee80a2691d..24dc3fcf15948e8a9ed93043cf46c0e81f929c36 100644 (file)
@@ -365,6 +365,7 @@ You can change this at module load time (for a module) with:
        regshifts=<shift1>,<shift2>,...
        slave_addrs=<addr1>,<addr2>,...
        force_kipmid=<enable1>,<enable2>,...
+       unload_when_empty=[0|1]
 
 Each of these except si_trydefaults is a list, the first item for the
 first interface, second item for the second interface, etc.
@@ -416,6 +417,11 @@ by the driver, but systems with broken interrupts might need an enable,
 or users that don't want the daemon (don't need the performance, don't
 want the CPU hit) can disable it.
 
+If unload_when_empty is set to 1, the driver will be unloaded if it
+doesn't find any interfaces or all the interfaces fail to work.  The
+default is one.  Setting to 0 is useful with the hotmod, but is
+obviously only useful for modules.
+
 When compiled into the kernel, the parameters can be specified on the
 kernel command line as:
 
@@ -441,6 +447,25 @@ have high-res timers enabled in the kernel and you don't have
 interrupts enabled, the driver will run VERY slowly.  Don't blame me,
 these interfaces suck.
 
+The driver supports a hot add and remove of interfaces.  This way,
+interfaces can be added or removed after the kernel is up and running.
+This is done using /sys/modules/ipmi_si/hotmod, which is a write-only
+parameter.  You write a string to this interface.  The string has the
+format:
+   <op1>[:op2[:op3...]]
+The "op"s are:
+   add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
+You can specify more than one interface on the line.  The "opt"s are:
+   rsp=<regspacing>
+   rsi=<regsize>
+   rsh=<regshift>
+   irq=<irq>
+   ipmb=<ipmb slave addr>
+and these have the same meanings as discussed above.  Note that you
+can also use this on the kernel command line for a more compact format
+for specifying an interface.  Note that when removing an interface,
+only the first three parameters (si type, address type, and address)
+are used for the comparison.  Any options are ignored for removing.
 
 The SMBus Driver
 ----------------
@@ -502,7 +527,10 @@ used to control it:
 
   modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
       preaction=<preaction type> preop=<preop type> start_now=x
-      nowayout=x
+      nowayout=x ifnum_to_use=n
+
+ifnum_to_use specifies which interface the watchdog timer should use.
+The default is -1, which means to pick the first one registered.
 
 The timeout is the number of seconds to the action, and the pretimeout
 is the amount of seconds before the reset that the pre-timeout panic will
@@ -624,5 +652,9 @@ command line.  The parameter is also available via the proc filesystem
 in /proc/sys/dev/ipmi/poweroff_powercycle.  Note that if the system
 does not support power cycling, it will always do the power off.
 
+The "ifnum_to_use" parameter specifies which interface the poweroff
+code should use.  The default is -1, which means to pick the first one
+registered.
+
 Note that if you have ACPI enabled, the system will prefer using ACPI to
 power off.
index e2a66f8143c5c63b0b780ee13fc1069b87c82011..a598fe10a2974f5757761df5ab8f7f98c5c5f84a 100644 (file)
@@ -24,8 +24,10 @@ very similar behavior to the deadline IO scheduler.
 Selecting IO schedulers
 -----------------------
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop' and 'as' (the default) are also available. IO schedulers are assigned
-globally at boot time only presently.
+'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
+assigned globally at boot time only presently. It's also possible to change
+the IO scheduler for a determined device on the fly, as described in
+Documentation/block/switching-sched.txt.
 
 
 Anticipatory IO scheduler Policies
index 70690f1a14af53cd128ab0a553421044e28cd319..8de132a02ba952867020a846229b0818ee73d214 100644 (file)
@@ -3,7 +3,7 @@
 
             Maintained by Torben Mathiasen <device@lanana.org>
 
-                     Last revised: 15 May 2006
+                     Last revised: 29 November 2006
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating
@@ -94,6 +94,7 @@ Your cooperation is appreciated.
                  9 = /dev/urandom      Faster, less secure random number gen.
                 10 = /dev/aio          Asynchronous I/O notification interface
                 11 = /dev/kmsg         Writes to this come out as printk's
+
   1 block      RAM disk
                  0 = /dev/ram0         First RAM disk
                  1 = /dev/ram1         Second RAM disk
@@ -122,7 +123,7 @@ Your cooperation is appreciated.
                devices are on major 128 and above and use the PTY
                master multiplex (/dev/ptmx) to acquire a PTY on
                demand.
-  
+
   2 block      Floppy disks
                  0 = /dev/fd0          Controller 0, drive 0, autodetect
                  1 = /dev/fd1          Controller 0, drive 1, autodetect
@@ -257,7 +258,7 @@ Your cooperation is appreciated.
                129 = /dev/vcsa1        tty1 text/attribute contents
                    ...
                191 = /dev/vcsa63       tty63 text/attribute contents
-       
+
                NOTE: These devices permit both read and write access.
 
   7 block      Loopback devices
@@ -411,7 +412,7 @@ Your cooperation is appreciated.
                207 = /dev/video/em8300_sp      EM8300 DVD decoder subpicture
                208 = /dev/compaq/cpqphpc       Compaq PCI Hot Plug Controller
                209 = /dev/compaq/cpqrid        Compaq Remote Insight Driver
-               210 = /dev/impi/bt      IMPI coprocessor block transfer 
+               210 = /dev/impi/bt      IMPI coprocessor block transfer
                211 = /dev/impi/smic    IMPI coprocessor stream interface
                212 = /dev/watchdogs/0  First watchdog device
                213 = /dev/watchdogs/1  Second watchdog device
@@ -506,6 +507,7 @@ Your cooperation is appreciated.
                 33 = /dev/patmgr1      Sequencer patch manager
                 34 = /dev/midi02       Third MIDI port
                 50 = /dev/midi03       Fourth MIDI port
+
  14 block      BIOS harddrive callback support {2.6}
                  0 = /dev/dos_hda      First BIOS harddrive whole disk
                 64 = /dev/dos_hdb      Second BIOS harddrive whole disk
@@ -527,6 +529,7 @@ Your cooperation is appreciated.
 
  16 char       Non-SCSI scanners
                  0 = /dev/gs4500       Genius 4500 handheld scanner
+
  16 block      GoldStar CD-ROM
                  0 = /dev/gscd         GoldStar CD-ROM
 
@@ -548,6 +551,7 @@ Your cooperation is appreciated.
                  0 = /dev/ttyC0        First Cyclades port
                    ...
                 31 = /dev/ttyC31       32nd Cyclades port
+
  19 block      "Double" compressed disk
                  0 = /dev/double0      First compressed disk
                    ...
@@ -563,6 +567,7 @@ Your cooperation is appreciated.
                  0 = /dev/cub0         Callout device for ttyC0
                    ...
                 31 = /dev/cub31        Callout device for ttyC31
+
  20 block      Hitachi CD-ROM (under development)
                  0 = /dev/hitcd        Hitachi CD-ROM
 
@@ -582,7 +587,7 @@ Your cooperation is appreciated.
 
                This device is used on the ARM-based Acorn RiscPC.
                Partitions are handled the same way as for IDE disks
-               (see major number 3). 
+               (see major number 3).
 
  22 char       Digiboard serial card
                  0 = /dev/ttyD0        First Digiboard port
@@ -591,7 +596,7 @@ Your cooperation is appreciated.
  22 block      Second IDE hard disk/CD-ROM interface
                  0 = /dev/hdc          Master: whole disk (or CD-ROM)
                 64 = /dev/hdd          Slave: whole disk (or CD-ROM)
-               
+
                Partitions are handled the same way as for the first
                interface (see major number 3).
 
@@ -639,6 +644,7 @@ Your cooperation is appreciated.
 
  26 char       Quanta WinVision frame grabber {2.6}
                  0 = /dev/wvisfgrab    Quanta WinVision frame grabber
+
  26 block      Second Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd4       Panasonic CD-ROM controller 1 unit 0
                  1 = /dev/sbpcd5       Panasonic CD-ROM controller 1 unit 1
@@ -670,6 +676,7 @@ Your cooperation is appreciated.
                 37 = /dev/nrawqft1     Unit 1, no rewind-on-close, no file marks
                 38 = /dev/nrawqft2     Unit 2, no rewind-on-close, no file marks
                 39 = /dev/nrawqft3     Unit 3, no rewind-on-close, no file marks
+
  27 block      Third Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd8       Panasonic CD-ROM controller 2 unit 0
                  1 = /dev/sbpcd9       Panasonic CD-ROM controller 2 unit 1
@@ -681,6 +688,7 @@ Your cooperation is appreciated.
                  1 = /dev/staliomem1   Second Stallion card I/O memory
                  2 = /dev/staliomem2   Third Stallion card I/O memory
                  3 = /dev/staliomem3   Fourth Stallion card I/O memory
+
  28 char       Atari SLM ACSI laser printer (68k/Atari)
                  0 = /dev/slm0         First SLM laser printer
                  1 = /dev/slm1         Second SLM laser printer
@@ -690,6 +698,7 @@ Your cooperation is appreciated.
                  1 = /dev/sbpcd13      Panasonic CD-ROM controller 3 unit 1
                  2 = /dev/sbpcd14      Panasonic CD-ROM controller 3 unit 2
                  3 = /dev/sbpcd15      Panasonic CD-ROM controller 3 unit 3
+
  28 block      ACSI disk (68k/Atari)
                  0 = /dev/ada          First ACSI disk whole disk
                 16 = /dev/adb          Second ACSI disk whole disk
@@ -750,6 +759,7 @@ Your cooperation is appreciated.
  31 char       MPU-401 MIDI
                  0 = /dev/mpu401data   MPU-401 data port
                  1 = /dev/mpu401stat   MPU-401 status port
+
  31 block      ROM/flash memory card
                  0 = /dev/rom0         First ROM card (rw)
                      ...
@@ -801,7 +811,7 @@ Your cooperation is appreciated.
  34 block      Fourth IDE hard disk/CD-ROM interface
                  0 = /dev/hdg          Master: whole disk (or CD-ROM)
                 64 = /dev/hdh          Slave: whole disk (or CD-ROM)
-               
+
                Partitions are handled the same way as for the first
                interface (see major number 3).
 
@@ -818,6 +828,7 @@ Your cooperation is appreciated.
                129 = /dev/smpte1       Second MIDI port, SMPTE timed
                130 = /dev/smpte2       Third MIDI port, SMPTE timed
                131 = /dev/smpte3       Fourth MIDI port, SMPTE timed
+
  35 block      Slow memory ramdisk
                  0 = /dev/slram        Slow memory ramdisk
 
@@ -828,6 +839,7 @@ Your cooperation is appreciated.
                 16 = /dev/tap0         First Ethertap device
                    ...
                 31 = /dev/tap15        16th Ethertap device
+
  36 block      MCA ESDI hard disk
                  0 = /dev/eda          First ESDI disk whole disk
                 64 = /dev/edb          Second ESDI disk whole disk
@@ -882,6 +894,7 @@ Your cooperation is appreciated.
 
  40 char       Matrox Meteor frame grabber {2.6}
                  0 = /dev/mmetfgrab    Matrox Meteor frame grabber
+
  40 block      Syquest EZ135 parallel port removable drive
                  0 = /dev/eza          Parallel EZ135 drive, whole disk
 
@@ -893,6 +906,7 @@ Your cooperation is appreciated.
 
  41 char       Yet Another Micro Monitor
                  0 = /dev/yamm         Yet Another Micro Monitor
+
  41 block      MicroSolutions BackPack parallel port CD-ROM
                  0 = /dev/bpcd         BackPack CD-ROM
 
@@ -901,6 +915,7 @@ Your cooperation is appreciated.
                the parallel port ATAPI CD-ROM driver at major number 46.
 
  42 char       Demo/sample use
+
  42 block      Demo/sample use
 
                This number is intended for use in sample code, as
@@ -918,6 +933,7 @@ Your cooperation is appreciated.
                  0 = /dev/ttyI0        First virtual modem
                    ...
                 63 = /dev/ttyI63       64th virtual modem
+
  43 block      Network block devices
                  0 = /dev/nb0          First network block device
                  1 = /dev/nb1          Second network block device
@@ -934,12 +950,13 @@ Your cooperation is appreciated.
                  0 = /dev/cui0         Callout device for ttyI0
                    ...
                 63 = /dev/cui63        Callout device for ttyI63
+
  44 block      Flash Translation Layer (FTL) filesystems
                  0 = /dev/ftla         FTL on first Memory Technology Device
                 16 = /dev/ftlb         FTL on second Memory Technology Device
                 32 = /dev/ftlc         FTL on third Memory Technology Device
                    ...
-               240 = /dev/ftlp         FTL on 16th Memory Technology Device 
+               240 = /dev/ftlp         FTL on 16th Memory Technology Device
 
                Partitions are handled in the same way as for IDE
                disks (see major number 3) except that the partition
@@ -958,6 +975,7 @@ Your cooperation is appreciated.
                191 = /dev/ippp63       64th SyncPPP device
 
                255 = /dev/isdninfo     ISDN monitor interface
+
  45 block      Parallel port IDE disk devices
                  0 = /dev/pda          First parallel port IDE disk
                 16 = /dev/pdb          Second parallel port IDE disk
@@ -1044,6 +1062,7 @@ Your cooperation is appreciated.
                  1 = /dev/dcbri1       Second DataComm card
                  2 = /dev/dcbri2       Third DataComm card
                  3 = /dev/dcbri3       Fourth DataComm card
+
  52 block      Mylex DAC960 PCI RAID controller; fifth controller
                  0 = /dev/rd/c4d0      First disk, whole disk
                  8 = /dev/rd/c4d1      Second disk, whole disk
@@ -1093,6 +1112,7 @@ Your cooperation is appreciated.
 
  55 char       DSP56001 digital signal processor
                  0 = /dev/dsp56k       First DSP56001
+
  55 block      Mylex DAC960 PCI RAID controller; eighth controller
                  0 = /dev/rd/c7d0      First disk, whole disk
                  8 = /dev/rd/c7d1      Second disk, whole disk
@@ -1130,6 +1150,7 @@ Your cooperation is appreciated.
                  0 = /dev/cup0         Callout device for ttyP0
                  1 = /dev/cup1         Callout device for ttyP1
                    ...
+
  58 block      Reserved for logical volume manager
 
  59 char       sf firewall package
@@ -1149,6 +1170,7 @@ Your cooperation is appreciated.
                NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
 
  60-63 char    LOCAL/EXPERIMENTAL USE
+
  60-63 block   LOCAL/EXPERIMENTAL USE
                Allocated for local/experimental use.  For devices not
                assigned official numbers, these ranges should be
@@ -1434,7 +1456,6 @@ Your cooperation is appreciated.
                DAC960 (see major number 48) except that the limit on
                partitions is 15.
 
-
  78 char       PAM Software's multimodem boards
                  0 = /dev/ttyM0        First PAM modem
                  1 = /dev/ttyM1        Second PAM modem
@@ -1450,7 +1471,6 @@ Your cooperation is appreciated.
                DAC960 (see major number 48) except that the limit on
                partitions is 15.
 
-
  79 char       PAM Software's multimodem boards - alternate devices
                  0 = /dev/cum0         Callout device for ttyM0
                  1 = /dev/cum1         Callout device for ttyM1
@@ -1466,7 +1486,6 @@ Your cooperation is appreciated.
                DAC960 (see major number 48) except that the limit on
                partitions is 15.
 
-
  80 char       Photometrics AT200 CCD camera
                  0 = /dev/at200        Photometrics AT200 CCD camera
 
@@ -1679,7 +1698,7 @@ Your cooperation is appreciated.
                  1 = /dev/dcxx1        Second capture card
                    ...
 
- 94 block IBM S/390 DASD block storage
+ 94 block      IBM S/390 DASD block storage
                  0 = /dev/dasda First DASD device, major
                  1 = /dev/dasda1 First DASD device, block 1
                  2 = /dev/dasda2 First DASD device, block 2
@@ -1695,7 +1714,7 @@ Your cooperation is appreciated.
                  1 = /dev/ipnat        NAT control device/log file
                  2 = /dev/ipstate      State information log file
                  3 = /dev/ipauth       Authentication control device/log file
-                   ...         
+                   ...
 
  96 char       Parallel port ATAPI tape devices
                  0 = /dev/pt0          First parallel port ATAPI tape
@@ -1705,7 +1724,7 @@ Your cooperation is appreciated.
                129 = /dev/npt1         Second p.p. ATAPI tape, no rewind
                    ...
 
- 96 block Inverse NAND Flash Translation Layer
+ 96 block      Inverse NAND Flash Translation Layer
                  0 = /dev/inftla First INFTL layer
                 16 = /dev/inftlb Second INFTL layer
                    ...
@@ -1937,7 +1956,6 @@ Your cooperation is appreciated.
                    ...
 
 113 block      IBM iSeries virtual CD-ROM
-
                  0 = /dev/iseries/vcda First virtual CD-ROM
                  1 = /dev/iseries/vcdb Second virtual CD-ROM
                    ...
@@ -2059,11 +2077,12 @@ Your cooperation is appreciated.
                    ...
 
 119 char       VMware virtual network control
-                 0 = /dev/vnet0        1st virtual network
-                 1 = /dev/vnet1        2nd virtual network
+                 0 = /dev/vmnet0       1st virtual network
+                 1 = /dev/vmnet1       2nd virtual network
                    ...
 
 120-127 char   LOCAL/EXPERIMENTAL USE
+
 120-127 block  LOCAL/EXPERIMENTAL USE
                Allocated for local/experimental use.  For devices not
                assigned official numbers, these ranges should be
@@ -2075,7 +2094,6 @@ Your cooperation is appreciated.
                nodes; instead they should be accessed through the
                /dev/ptmx cloning interface.
 
-
 128 block       SCSI disk devices (128-143)
                   0 = /dev/sddy         129th SCSI disk whole disk
                  16 = /dev/sddz         130th SCSI disk whole disk
@@ -2087,7 +2105,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 129 block       SCSI disk devices (144-159)
                   0 = /dev/sdeo         145th SCSI disk whole disk
                  16 = /dev/sdep         146th SCSI disk whole disk
@@ -2123,7 +2140,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 132 block       SCSI disk devices (192-207)
                   0 = /dev/sdgk         193rd SCSI disk whole disk
                  16 = /dev/sdgl         194th SCSI disk whole disk
@@ -2135,7 +2151,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 133 block       SCSI disk devices (208-223)
                   0 = /dev/sdha         209th SCSI disk whole disk
                  16 = /dev/sdhb         210th SCSI disk whole disk
@@ -2147,7 +2162,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 134 block       SCSI disk devices (224-239)
                   0 = /dev/sdhq         225th SCSI disk whole disk
                  16 = /dev/sdhr         226th SCSI disk whole disk
@@ -2159,7 +2173,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 135 block       SCSI disk devices (240-255)
                   0 = /dev/sdig         241st SCSI disk whole disk
                  16 = /dev/sdih         242nd SCSI disk whole disk
@@ -2171,7 +2184,6 @@ Your cooperation is appreciated.
                disks (see major number 3) except that the limit on
                partitions is 15.
 
-
 136-143 char   Unix98 PTY slaves
                  0 = /dev/pts/0        First Unix98 pseudo-TTY
                  1 = /dev/pts/1        Second Unix98 pesudo-TTY
@@ -2384,6 +2396,7 @@ Your cooperation is appreciated.
                    ...
 
 159 char       RESERVED
+
 159 block      RESERVED
 
 160 char       General Purpose Instrument Bus (GPIB)
@@ -2427,7 +2440,7 @@ Your cooperation is appreciated.
 
                Partitions are handled in the same way as for IDE
                disks (see major number 3) except that the limit on
-               partitions is 31. 
+               partitions is 31.
 
 162 char       Raw block device interface
                  0 = /dev/rawctl       Raw I/O control device
@@ -2483,7 +2496,6 @@ Your cooperation is appreciated.
 
 171 char       Reserved for IEEE 1394 (Firewire)
 
-
 172 char       Moxa Intellio serial card
                  0 = /dev/ttyMX0       First Moxa port
                  1 = /dev/ttyMX1       Second Moxa port
@@ -2543,9 +2555,6 @@ Your cooperation is appreciated.
                 64 = /dev/usb/rio500   Diamond Rio 500
                 65 = /dev/usb/usblcd   USBLCD Interface (info@usblcd.de)
                 66 = /dev/usb/cpad0    Synaptics cPad (mouse/LCD)
-                67 = /dev/usb/adutux0  1st Ontrak ADU device
-                   ...
-                76 = /dev/usb/adutux10 10th Ontrak ADU device
                 96 = /dev/usb/hiddev0  1st USB HID device
                    ...
                111 = /dev/usb/hiddev15 16th USB HID device
@@ -2558,7 +2567,7 @@ Your cooperation is appreciated.
                132 = /dev/usb/idmouse  ID Mouse (fingerprint scanner) device
                133 = /dev/usb/sisusbvga1       First SiSUSB VGA device
                    ...
-               140 = /dev/usb/sisusbvga8       Eigth SISUSB VGA device
+               140 = /dev/usb/sisusbvga8       Eighth SISUSB VGA device
                144 = /dev/usb/lcd      USB LCD device
                160 = /dev/usb/legousbtower0    1st USB Legotower device
                    ...
@@ -2571,7 +2580,7 @@ Your cooperation is appreciated.
                  0 = /dev/uba          First USB block device
                  8 = /dev/ubb          Second USB block device
                 16 = /dev/ubc          Third USB block device
-                   ...
+                   ...
 
 181 char       Conrad Electronic parallel port radio clocks
                  0 = /dev/pcfclock0    First Conrad radio clock
@@ -2657,7 +2666,7 @@ Your cooperation is appreciated.
                 32 = /dev/mvideo/status2       Third device
                    ...
                    ...
-               240 = /dev/mvideo/status15      16th device 
+               240 = /dev/mvideo/status15      16th device
                    ...
 
 195 char       Nvidia graphics devices
@@ -2795,6 +2804,10 @@ Your cooperation is appreciated.
                    ...
                 185 = /dev/ttyNX15             Hilscher netX serial port 15
                 186 = /dev/ttyJ0               JTAG1 DCC protocol based serial port emulation
+                187 = /dev/ttyUL0              Xilinx uartlite - port 0
+                   ...
+                190 = /dev/ttyUL3              Xilinx uartlite - port 3
+                191 = /dev/xvc0                Xen virtual console - port 0
 
 205 char       Low-density serial ports (alternate device)
                  0 = /dev/culu0                Callout device for ttyLU0
@@ -2832,7 +2845,6 @@ Your cooperation is appreciated.
                 82 = /dev/cuvr0                Callout device for ttyVR0
                 83 = /dev/cuvr1                Callout device for ttyVR1
 
-
 206 char       OnStream SC-x0 tape devices
                  0 = /dev/osst0                First OnStream SCSI tape, mode 0
                  1 = /dev/osst1                Second OnStream SCSI tape, mode 0
@@ -2922,7 +2934,6 @@ Your cooperation is appreciated.
                    ...
 
 212 char       LinuxTV.org DVB driver subsystem
-
                  0 = /dev/dvb/adapter0/video0    first video decoder of first card
                  1 = /dev/dvb/adapter0/audio0    first audio decoder of first card
                  2 = /dev/dvb/adapter0/sec0      (obsolete/unused)
@@ -3008,9 +3019,9 @@ Your cooperation is appreciated.
                  2 = /dev/3270/tub2            Second 3270 terminal
                    ...
 
-229 char       IBM iSeries virtual console
-                 0 = /dev/iseries/vtty0        First console port
-                 1 = /dev/iseries/vtty1        Second console port
+229 char       IBM iSeries/pSeries virtual console
+                 0 = /dev/hvc0                 First console port
+                 1 = /dev/hvc1                 Second console port
                    ...
 
 230 char       IBM iSeries virtual tape
@@ -3083,12 +3094,14 @@ Your cooperation is appreciated.
 234-239                UNASSIGNED
 
 240-254 char   LOCAL/EXPERIMENTAL USE
+
 240-254 block  LOCAL/EXPERIMENTAL USE
                Allocated for local/experimental use.  For devices not
                assigned official numbers, these ranges should be
                used in order to avoid conflicting with future assignments.
 
 255 char       RESERVED
+
 255 block      RESERVED
 
                This major is reserved to assist the expansion to a
@@ -3115,7 +3128,20 @@ Your cooperation is appreciated.
 257 char       Phoenix Technologies Cryptographic Services Driver
                  0 = /dev/ptlsec       Crypto Services Driver
 
-
+257 block      SSFDC Flash Translation Layer filesystem
+                 0 = /dev/ssfdca       First SSFDC layer
+                 8 = /dev/ssfdcb       Second SSFDC layer
+                16 = /dev/ssfdcc       Third SSFDC layer
+                24 = /dev/ssfdcd       4th SSFDC layer
+                32 = /dev/ssfdce       5th SSFDC layer
+                40 = /dev/ssfdcf       6th SSFDC layer
+                48 = /dev/ssfdcg       7th SSFDC layer
+                56 = /dev/ssfdch       8th SSFDC layer
+
+258 block      ROM/Flash read-only translation layer
+                 0 = /dev/blockrom0    First ROM card's translation layer interface
+                 1 = /dev/blockrom1    Second ROM card's translation layer interface
+                 ...
 
  ****  ADDITIONAL /dev DIRECTORY ENTRIES
 
index eb1a6cad21e6a8cadc993111b1f4c7099d794ad2..790ef6fbe495914f94ea351e92834d9fb206f80c 100644 (file)
@@ -124,7 +124,7 @@ sync_fs:            no      no      read
 write_super_lockfs:    ?
 unlockfs:              ?
 statfs:                        no      no      no
-remount_fs:            no      yes     maybe           (see below)
+remount_fs:            yes     yes     maybe           (see below)
 clear_inode:           no
 umount_begin:          yes     no      no
 show_options:          no                              (vfsmount->sem)
index 3d74477389587b4be4d03950845c17a1e396a707..345392c4caebdb1d7bc806d4f6f6b9fa911fc8e6 100644 (file)
@@ -51,6 +51,22 @@ homepage:
 
   http://fuse.sourceforge.net/
 
+Filesystem type
+~~~~~~~~~~~~~~~
+
+The filesystem type given to mount(2) can be one of the following:
+
+'fuse'
+
+  This is the usual way to mount a FUSE filesystem.  The first
+  argument of the mount system call may contain an arbitrary string,
+  which is not interpreted by the kernel.
+
+'fuseblk'
+
+  The filesystem is block device based.  The first argument of the
+  mount system call is interpreted as the name of the device.
+
 Mount options
 ~~~~~~~~~~~~~
 
@@ -94,6 +110,11 @@ Mount options
   The default is infinite.  Note that the size of read requests is
   limited anyway to 32 pages (which is 128kbyte on i386).
 
+'blksize=N'
+
+  Set the block size for the filesystem.  The default is 512.  This
+  option is only valid for 'fuseblk' type mounts.
+
 Control filesystem
 ~~~~~~~~~~~~~~~~~~
 
index d81722418010f551f066d264c8276c861e82ef40..253b50d1328ed8d62e873f9e6ca750972bc603ce 100644 (file)
@@ -1,11 +1,8 @@
-This is the implementation of the SystemV/Coherent filesystem for Linux.
 It implements all of
   - Xenix FS,
   - SystemV/386 FS,
   - Coherent FS.
 
-This is version beta 4.
-
 To install:
 * Answer the 'System V and Coherent filesystem support' question with 'y'
   when configuring the kernel.
@@ -28,11 +25,173 @@ Bugs in the present implementation:
   for this FS on hard disk yet.
 
 
-Please report any bugs and suggestions to
-  Bruno Haible <haible@ma2s2.mathematik.uni-karlsruhe.de>
-  Pascal Haible <haible@izfm.uni-stuttgart.de>
-  Krzysztof G. Baranowski <kgb@manjak.knm.org.pl>
+These filesystems are rather similar. Here is a comparison with Minix FS:
+
+* Linux fdisk reports on partitions
+  - Minix FS     0x81 Linux/Minix
+  - Xenix FS     ??
+  - SystemV FS   ??
+  - Coherent FS  0x08 AIX bootable
+
+* Size of a block or zone (data allocation unit on disk)
+  - Minix FS     1024
+  - Xenix FS     1024 (also 512 ??)
+  - SystemV FS   1024 (also 512 and 2048)
+  - Coherent FS   512
+
+* General layout: all have one boot block, one super block and
+  separate areas for inodes and for directories/data.
+  On SystemV Release 2 FS (e.g. Microport) the first track is reserved and
+  all the block numbers (including the super block) are offset by one track.
+
+* Byte ordering of "short" (16 bit entities) on disk:
+  - Minix FS     little endian  0 1
+  - Xenix FS     little endian  0 1
+  - SystemV FS   little endian  0 1
+  - Coherent FS  little endian  0 1
+  Of course, this affects only the file system, not the data of files on it!
+
+* Byte ordering of "long" (32 bit entities) on disk:
+  - Minix FS     little endian  0 1 2 3
+  - Xenix FS     little endian  0 1 2 3
+  - SystemV FS   little endian  0 1 2 3
+  - Coherent FS  PDP-11         2 3 0 1
+  Of course, this affects only the file system, not the data of files on it!
+
+* Inode on disk: "short", 0 means non-existent, the root dir ino is:
+  - Minix FS                            1
+  - Xenix FS, SystemV FS, Coherent FS   2
+
+* Maximum number of hard links to a file:
+  - Minix FS     250
+  - Xenix FS     ??
+  - SystemV FS   ??
+  - Coherent FS  >=10000
+
+* Free inode management:
+  - Minix FS                             a bitmap
+  - Xenix FS, SystemV FS, Coherent FS
+      There is a cache of a certain number of free inodes in the super-block.
+      When it is exhausted, new free inodes are found using a linear search.
+
+* Free block management:
+  - Minix FS                             a bitmap
+  - Xenix FS, SystemV FS, Coherent FS
+      Free blocks are organized in a "free list". Maybe a misleading term,
+      since it is not true that every free block contains a pointer to
+      the next free block. Rather, the free blocks are organized in chunks
+      of limited size, and every now and then a free block contains pointers
+      to the free blocks pertaining to the next chunk; the first of these
+      contains pointers and so on. The list terminates with a "block number"
+      0 on Xenix FS and SystemV FS, with a block zeroed out on Coherent FS.
+
+* Super-block location:
+  - Minix FS     block 1 = bytes 1024..2047
+  - Xenix FS     block 1 = bytes 1024..2047
+  - SystemV FS   bytes 512..1023
+  - Coherent FS  block 1 = bytes 512..1023
+
+* Super-block layout:
+  - Minix FS
+                    unsigned short s_ninodes;
+                    unsigned short s_nzones;
+                    unsigned short s_imap_blocks;
+                    unsigned short s_zmap_blocks;
+                    unsigned short s_firstdatazone;
+                    unsigned short s_log_zone_size;
+                    unsigned long s_max_size;
+                    unsigned short s_magic;
+  - Xenix FS, SystemV FS, Coherent FS
+                    unsigned short s_firstdatazone;
+                    unsigned long  s_nzones;
+                    unsigned short s_fzone_count;
+                    unsigned long  s_fzones[NICFREE];
+                    unsigned short s_finode_count;
+                    unsigned short s_finodes[NICINOD];
+                    char           s_flock;
+                    char           s_ilock;
+                    char           s_modified;
+                    char           s_rdonly;
+                    unsigned long  s_time;
+                    short          s_dinfo[4]; -- SystemV FS only
+                    unsigned long  s_free_zones;
+                    unsigned short s_free_inodes;
+                    short          s_dinfo[4]; -- Xenix FS only
+                    unsigned short s_interleave_m,s_interleave_n; -- Coherent FS only
+                    char           s_fname[6];
+                    char           s_fpack[6];
+    then they differ considerably:
+        Xenix FS
+                    char           s_clean;
+                    char           s_fill[371];
+                    long           s_magic;
+                    long           s_type;
+        SystemV FS
+                    long           s_fill[12 or 14];
+                    long           s_state;
+                    long           s_magic;
+                    long           s_type;
+        Coherent FS
+                    unsigned long  s_unique;
+    Note that Coherent FS has no magic.
+
+* Inode layout:
+  - Minix FS
+                    unsigned short i_mode;
+                    unsigned short i_uid;
+                    unsigned long  i_size;
+                    unsigned long  i_time;
+                    unsigned char  i_gid;
+                    unsigned char  i_nlinks;
+                    unsigned short i_zone[7+1+1];
+  - Xenix FS, SystemV FS, Coherent FS
+                    unsigned short i_mode;
+                    unsigned short i_nlink;
+                    unsigned short i_uid;
+                    unsigned short i_gid;
+                    unsigned long  i_size;
+                    unsigned char  i_zone[3*(10+1+1+1)];
+                    unsigned long  i_atime;
+                    unsigned long  i_mtime;
+                    unsigned long  i_ctime;
+
+* Regular file data blocks are organized as
+  - Minix FS
+               7 direct blocks
+               1 indirect block (pointers to blocks)
+               1 double-indirect block (pointer to pointers to blocks)
+  - Xenix FS, SystemV FS, Coherent FS
+              10 direct blocks
+               1 indirect block (pointers to blocks)
+               1 double-indirect block (pointer to pointers to blocks)
+               1 triple-indirect block (pointer to pointers to pointers to blocks)
+
+* Inode size, inodes per block
+  - Minix FS        32   32
+  - Xenix FS        64   16
+  - SystemV FS      64   16
+  - Coherent FS     64    8
+
+* Directory entry on disk
+  - Minix FS
+                    unsigned short inode;
+                    char name[14/30];
+  - Xenix FS, SystemV FS, Coherent FS
+                    unsigned short inode;
+                    char name[14];
+
+* Dir entry size, dir entries per block
+  - Minix FS     16/32    64/32
+  - Xenix FS     16       64
+  - SystemV FS   16       64
+  - Coherent FS  16       32
+
+* How to implement symbolic links such that the host fsck doesn't scream:
+  - Minix FS     normal
+  - Xenix FS     kludge: as regular files with  chmod 1000
+  - SystemV FS   ??
+  - Coherent FS  kludge: as regular files with  chmod 1000
 
-Bruno Haible
-<haible@ma2s2.mathematik.uni-karlsruhe.de>
 
+Notation: We often speak of a "block" but mean a zone (the allocation unit)
+and not the disk driver's notion of "block".
index c51314b1a463a35eb222d550409d0a29137149e2..9575de300a6173ea92dec18b198f48395721ed0e 100644 (file)
@@ -2,7 +2,7 @@
                     ----------------------------
 
                    H. Peter Anvin <hpa@zytor.com>
-                       Last update 2005-09-02
+                       Last update 2006-11-17
 
 On the i386 platform, the Linux kernel uses a rather complicated boot
 convention.  This has evolved partially due to historical aspects, as
@@ -35,6 +35,8 @@ Protocol 2.03:        (Kernel 2.4.18-pre1) Explicitly makes the highest possible
                initrd address available to the bootloader.
 
 Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes.
+Protocol 2.05: (Kernel 2.6.20) Make protected mode kernel relocatable.
+               Introduce relocatable_kernel and kernel_alignment fields.
 
 
 **** MEMORY LAYOUT
@@ -129,6 +131,8 @@ Offset      Proto   Name            Meaning
 0226/2 N/A     pad1            Unused
 0228/4 2.02+   cmd_line_ptr    32-bit pointer to the kernel command line
 022C/4 2.03+   initrd_addr_max Highest legal initrd address
+0230/4 2.05+   kernel_alignment Physical addr alignment required for kernel
+0234/1 2.05+   relocatable_kernel Whether kernel is relocatable or not
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
index 2e1898e4e8fd38e67ac9913480178454b094355e..b79bcdf163199fe147311cb94e3711a0cb24512d 100644 (file)
@@ -599,8 +599,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
        hugepages=      [HW,IA-32,IA-64] Maximal number of HugeTLB pages.
 
-       noirqbalance    [IA-32,SMP,KNL] Disable kernel irq balancing
-
        i8042.direct    [HW] Put keyboard port into non-translated mode
        i8042.dumbkbd   [HW] Pretend that controller can only read data from
                             keyboard and cannot control its state
@@ -650,6 +648,10 @@ and is between 256 and 4096 characters. It is defined in the file
        idle=           [HW]
                        Format: idle=poll or idle=halt
 
+       ignore_loglevel [KNL]
+                       Ignore loglevel setting - this will print /all/
+                       kernel messages to the console. Useful for debugging.
+
        ihash_entries=  [KNL]
                        Set number of hash buckets for inode cache.
 
@@ -714,7 +716,12 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
        isolcpus=       [KNL,SMP] Isolate CPUs from the general scheduler.
-                       Format: <cpu number>,...,<cpu number>
+                       Format:
+                       <cpu number>,...,<cpu number>
+                       or
+                       <cpu number>-<cpu number>  (must be a positive range in ascending order)
+                       or a mixture
+                       <cpu number>,...,<cpu number>-<cpu number>
                        This option can be used to specify one or more CPUs
                        to isolate from the general SMP balancing and scheduling
                        algorithms. The only way to move a process onto or off
@@ -1012,6 +1019,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        emulation library even if a 387 maths coprocessor
                        is present.
 
+       noaliencache    [MM, NUMA] Disables the allcoation of alien caches in
+                       the slab allocator.  Saves per-node memory, but will
+                       impact performance on real NUMA hardware.
+
        noalign         [KNL,ARM]
 
        noapic          [SMP,APIC] Tells the kernel to not make use of any
@@ -1052,9 +1063,14 @@ and is between 256 and 4096 characters. It is defined in the file
                        in certain environments such as networked servers or
                        real-time systems.
 
+       noirqbalance    [IA-32,SMP,KNL] Disable kernel irq balancing
+
        noirqdebug      [IA-32] Disables the code which attempts to detect and
                        disable unhandled interrupt sources.
 
+       no_timer_check  [IA-32,X86_64,APIC] Disables the code which tests for
+                       broken timer IRQ sources.
+
        noisapnp        [ISAPNP] Disables ISA PnP code.
 
        noinitrd        [RAM] Tells the kernel not to load any configured
@@ -1285,6 +1301,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        Param: "schedule" - profile schedule points.
                        Param: <number> - step/bucket size as a power of 2 for
                                statistical time based profiling.
+                       Param: "sleep" - profile D-state sleeping (millisecs)
 
        processor.max_cstate=   [HW,ACPI]
                        Limit processor to maximum C-state
@@ -1366,6 +1383,12 @@ and is between 256 and 4096 characters. It is defined in the file
        resume=         [SWSUSP]
                        Specify the partition device for software suspend
 
+       resume_offset=  [SWSUSP]
+                       Specify the offset from the beginning of the partition
+                       given by "resume=" at which the swap header is located,
+                       in <PAGE_SIZE> units (needed only for swap files).
+                       See  Documentation/power/swsusp-and-swap-files.txt
+
        rhash_entries=  [KNL,NET]
                        Set number of hash buckets for route cache
 
@@ -1732,6 +1755,9 @@ and is between 256 and 4096 characters. It is defined in the file
        norandmaps      Don't use address space randomization
                        Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
 
+       unwind_debug=N  N > 0 will enable dwarf2 unwinder debugging
+                       This is useful to get more information why
+                       you got a "dwarf2 unwinder stuck"
 
 ______________________________________________________________________
 
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
new file mode 100644 (file)
index 0000000..b05f512
--- /dev/null
@@ -0,0 +1,56 @@
+                       How to get s2ram working
+                       ~~~~~~~~~~~~~~~~~~~~~~~~
+                       2006 Linus Torvalds
+                       2006 Pavel Machek
+
+1) Check suspend.sf.net, program s2ram there has long whitelist of
+   "known ok" machines, along with tricks to use on each one.
+
+2) If that does not help, try reading tricks.txt and
+   video.txt. Perhaps problem is as simple as broken module, and
+   simple module unload can fix it.
+
+3) You can use Linus' TRACE_RESUME infrastructure, described below.
+
+                     Using TRACE_RESUME
+                     ~~~~~~~~~~~~~~~~~~
+
+I've been working at making the machines I have able to STR, and almost
+always it's a driver that is buggy. Thank God for the suspend/resume
+debugging - the thing that Chuck tried to disable. That's often the _only_
+way to debug these things, and it's actually pretty powerful (but
+time-consuming - having to insert TRACE_RESUME() markers into the device
+driver that doesn't resume and recompile and reboot).
+
+Anyway, the way to debug this for people who are interested (have a
+machine that doesn't boot) is:
+
+ - enable PM_DEBUG, and PM_TRACE
+
+ - use a script like this:
+
+       #!/bin/sh
+       sync
+       echo 1 > /sys/power/pm_trace
+       echo mem > /sys/power/state
+
+   to suspend
+
+ - if it doesn't come back up (which is usually the problem), reboot by
+   holding the power button down, and look at the dmesg output for things
+   like
+
+       Magic number: 4:156:725
+       hash matches drivers/base/power/resume.c:28
+       hash matches device 0000:01:00.0
+
+   which means that the last trace event was just before trying to resume
+   device 0000:01:00.0. Then figure out what driver is controlling that
+   device (lspci and /sys/devices/pci* is your friend), and see if you can
+   fix it, disable it, or trace into its resume function.
+
+For example, the above happens to be the VGA device on my EVO, which I
+used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out
+that "radeonfb" simply cannot resume that device - it tries to set the
+PLL's, and it just _hangs_. Using the regular VGA console and letting X
+resume it instead works fine.
diff --git a/Documentation/power/swsusp-and-swap-files.txt b/Documentation/power/swsusp-and-swap-files.txt
new file mode 100644 (file)
index 0000000..06f911a
--- /dev/null
@@ -0,0 +1,60 @@
+Using swap files with software suspend (swsusp)
+       (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+
+The Linux kernel handles swap files almost in the same way as it handles swap
+partitions and there are only two differences between these two types of swap
+areas:
+(1) swap files need not be contiguous,
+(2) the header of a swap file is not in the first block of the partition that
+holds it.  From the swsusp's point of view (1) is not a problem, because it is
+already taken care of by the swap-handling code, but (2) has to be taken into
+consideration.
+
+In principle the location of a swap file's header may be determined with the
+help of appropriate filesystem driver.  Unfortunately, however, it requires the
+filesystem holding the swap file to be mounted, and if this filesystem is
+journaled, it cannot be mounted during resume from disk.  For this reason to
+identify a swap file swsusp uses the name of the partition that holds the file
+and the offset from the beginning of the partition at which the swap file's
+header is located.  For convenience, this offset is expressed in <PAGE_SIZE>
+units.
+
+In order to use a swap file with swsusp, you need to:
+
+1) Create the swap file and make it active, eg.
+
+# dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
+# mkswap <swap_file_path>
+# swapon <swap_file_path>
+
+2) Use an application that will bmap the swap file with the help of the
+FIBMAP ioctl and determine the location of the file's swap header, as the
+offset, in <PAGE_SIZE> units, from the beginning of the partition which
+holds the swap file.
+
+3) Add the following parameters to the kernel command line:
+
+resume=<swap_file_partition> resume_offset=<swap_file_offset>
+
+where <swap_file_partition> is the partition on which the swap file is located
+and <swap_file_offset> is the offset of the swap header determined by the
+application in 2) (of course, this step may be carried out automatically
+by the same application that determies the swap file's header offset using the
+FIBMAP ioctl)
+
+OR
+
+Use a userland suspend application that will set the partition and offset
+with the help of the SNAPSHOT_SET_SWAP_AREA ioctl described in
+Documentation/power/userland-swsusp.txt (this is the only method to suspend
+to a swap file allowing the resume to be initiated from an initrd or initramfs
+image).
+
+Now, swsusp will use the swap file in the same way in which it would use a swap
+partition.  In particular, the swap file has to be active (ie. be present in
+/proc/swaps) so that it can be used for suspending.
+
+Note that if the swap file used for suspending is deleted and recreated,
+the location of its header need not be the same as before.  Thus every time
+this happens the value of the "resume_offset=" kernel command line parameter
+has to be updated.
index e635e6f1e316ca549834716c95fccc3c61b35748..0761ff6c57eddf65779e11d4991e751c250fe340 100644 (file)
@@ -297,20 +297,12 @@ system is shut down or suspended. Additionally use the encrypted
 suspend image to prevent sensitive data from being stolen after
 resume.
 
-Q: Why can't we suspend to a swap file?
+Q: Can I suspend to a swap file?
 
-A: Because accessing swap file needs the filesystem mounted, and
-filesystem might do something wrong (like replaying the journal)
-during mount.
-
-There are few ways to get that fixed:
-
-1) Probably could be solved by modifying every filesystem to support
-some kind of "really read-only!" option. Patches welcome.
-
-2) suspend2 gets around that by storing absolute positions in on-disk
-image (and blocksize), with resume parameter pointing directly to
-suspend header.
+A: Generally, yes, you can.  However, it requires you to use the "resume=" and
+"resume_offset=" kernel command line parameters, so the resume from a swap file
+cannot be initiated from an initrd or initramfs image.  See
+swsusp-and-swap-files.txt for details.
 
 Q: Is there a maximum system RAM size that is supported by swsusp?
 
index 64755e9285dbfe9236916bc7aca819b9d41f908e..000556c932e9fc4a4ede893f997d66833c4902c9 100644 (file)
@@ -9,9 +9,8 @@ done it already.
 Now, to use the userland interface for software suspend you need special
 utilities that will read/write the system memory snapshot from/to the
 kernel.  Such utilities are available, for example, from
-<http://www.sisk.pl/kernel/utilities/suspend>.  You may want to have
-a look at them if you are going to develop your own suspend/resume
-utilities.
+<http://suspend.sourceforge.net>.  You may want to have a look at them if you
+are going to develop your own suspend/resume utilities.
 
 The interface consists of a character device providing the open(),
 release(), read(), and write() operations as well as several ioctl()
@@ -21,9 +20,9 @@ be read from /sys/class/misc/snapshot/dev.
 
 The device can be open either for reading or for writing.  If open for
 reading, it is considered to be in the suspend mode.  Otherwise it is
-assumed to be in the resume mode.  The device cannot be open for reading
-and writing.  It is also impossible to have the device open more than once
-at a time.
+assumed to be in the resume mode.  The device cannot be open for simultaneous
+reading and writing.  It is also impossible to have the device open more than
+once at a time.
 
 The ioctl() commands recognized by the device are:
 
@@ -69,9 +68,46 @@ SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated with
 SNAPSHOT_SET_SWAP_FILE - set the resume partition (the last ioctl() argument
        should specify the device's major and minor numbers in the old
        two-byte format, as returned by the stat() function in the .st_rdev
-       member of the stat structure); it is recommended to always use this
-       call, because the code to set the resume partition could be removed from
-       future kernels
+       member of the stat structure)
+
+SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
+       units) from the beginning of the partition at which the swap header is
+       located (the last ioctl() argument should point to a struct
+       resume_swap_area, as defined in kernel/power/power.h, containing the
+       resume device specification, as for the SNAPSHOT_SET_SWAP_FILE ioctl(),
+       and the offset); for swap partitions the offset is always 0, but it is
+       different to zero for swap files (please see
+       Documentation/swsusp-and-swap-files.txt for details).
+       The SNAPSHOT_SET_SWAP_AREA ioctl() is considered as a replacement for
+       SNAPSHOT_SET_SWAP_FILE which is regarded as obsolete.   It is
+       recommended to always use this call, because the code to set the resume
+       partition may be removed from future kernels
+
+SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
+       immediately enter the suspend-to-RAM state, so this call must always
+       be preceded by the SNAPSHOT_FREEZE call and it is also necessary
+       to use the SNAPSHOT_UNFREEZE call after the system wakes up.  This call
+       is needed to implement the suspend-to-both mechanism in which the
+       suspend image is first created, as though the system had been suspended
+       to disk, and then the system is suspended to RAM (this makes it possible
+       to resume the system from RAM if there's enough battery power or restore
+       its state on the basis of the saved suspend image otherwise)
+
+SNAPSHOT_PMOPS - enable the usage of the pmops->prepare, pmops->enter and
+       pmops->finish methods (the in-kernel swsusp knows these as the "platform
+       method") which are needed on many machines to (among others) speed up
+       the resume by letting the BIOS skip some steps or to let the system
+       recognise the correct state of the hardware after the resume (in
+       particular on many machines this ensures that unplugged AC
+       adapters get correctly detected and that kacpid does not run wild after
+       the resume).  The last ioctl() argument can take one of the three
+       values, defined in kernel/power/power.h:
+       PMOPS_PREPARE - make the kernel carry out the
+               pm_ops->prepare(PM_SUSPEND_DISK) operation
+       PMOPS_ENTER - make the kernel power off the system by calling
+               pm_ops->enter(PM_SUSPEND_DISK)
+       PMOPS_FINISH - make the kernel carry out the
+               pm_ops->finish(PM_SUSPEND_DISK) operation
 
 The device's read() operation can be used to transfer the snapshot image from
 the kernel.  It has the following limitations:
@@ -91,10 +127,12 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap partition, called the resume
-partition, as storage space.  However, this is not really required, as they
-can use, for example, a special (blank) suspend partition or a file on a partition
-that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and mounted afterwards.
+snapshot image from/to the kernel will use a swap parition, called the resume
+partition, or a swap file as storage space (if a swap file is used, the resume
+partition is the partition that holds this file).  However, this is not really
+required, as they can use, for example, a special (blank) suspend partition or
+a file on a partition that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and
+mounted afterwards.
 
 These utilities SHOULD NOT make any assumptions regarding the ordering of
 data within the snapshot image, except for the image header that MAY be
index f39c9d714db3d6bf2f6440d2f6cf9353057eeae5..a2afca3b2bab6fb923fb9eda102073606d15c278 100644 (file)
@@ -62,9 +62,6 @@ consider the following facts about the Linux kernel:
       - different structures can contain different fields
       - Some functions may not be implemented at all, (i.e. some locks
        compile away to nothing for non-SMP builds.)
-      - Parameter passing of variables from function to function can be
-       done in different ways (the CONFIG_REGPARM option controls
-       this.)
       - Memory within the kernel can be aligned in different ways,
        depending on the build options.
   - Linux runs on a wide range of different processor architectures.
index 0bc7f1e3c9e6aa2e340bec8f512684351630fc9f..5922e84d913340b98891a8e583663ab55ad3c5a6 100644 (file)
@@ -27,6 +27,7 @@ show up in /proc/sys/kernel:
 - hotplug
 - java-appletviewer           [ binfmt_java, obsolete ]
 - java-interpreter            [ binfmt_java, obsolete ]
+- kstack_depth_to_print       [ X86 only ]
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/kmod.txt
 - msgmax
@@ -170,6 +171,13 @@ This flag controls the L2 cache of G3 processor boards. If
 
 ==============================================================
 
+kstack_depth_to_print: (X86 only)
+
+Controls the number of words to print when dumping the raw
+kernel stack.
+
+==============================================================
+
 osrelease, ostype & version:
 
 # cat osrelease
index f3c57f43ba6460e5b5927eaee2c86e2cfcaf5fa3..dbdcaf68e3ea382304784bf66fce502216f1d1f1 100644 (file)
@@ -52,10 +52,6 @@ APICs
                 apicmaintimer. Useful when your PIT timer is totally
                 broken.
 
-   disable_8254_timer / enable_8254_timer
-                Enable interrupt 0 timer routing over the 8254 in addition to over
-                the IO-APIC. The kernel tries to set a sensible default.
-
 Early Console
 
    syntax: earlyprintk=vga
@@ -183,7 +179,7 @@ PCI
 IOMMU
 
  iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge]
-         [,forcesac][,fullflush][,nomerge][,noaperture]
+         [,forcesac][,fullflush][,nomerge][,noaperture][,calgary]
    size  set size of iommu (in bytes)
    noagp don't initialize the AGP driver and use full aperture.
    off   don't use the IOMMU
@@ -204,6 +200,7 @@ IOMMU
            buffering.
    nodac    Forbid DMA >4GB
    panic    Always panic when IOMMU overflows
+   calgary  Use the Calgary IOMMU if it is available
 
   swiotlb=pages[,force]
 
index 5dff26814a06067c6122816fced3ce675638747d..cf24400213f8fc75b51d2f93bbafa60ac0a5593c 100644 (file)
@@ -1091,13 +1091,19 @@ M:      miku@iki.fi
 S:     Maintained
 
 EXT2 FILE SYSTEM
-L:     ext2-devel@lists.sourceforge.net
+L:     linux-ext4@vger.kernel.org
 S:     Maintained
 
 EXT3 FILE SYSTEM
 P:     Stephen Tweedie, Andrew Morton
 M:     sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L:     ext2-devel@lists.sourceforge.net
+L:     linux-ext4@vger.kernel.org
+S:     Maintained
+
+EXT4 FILE SYSTEM
+P:     Stephen Tweedie, Andrew Morton
+M:     sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
+L:     linux-ext4@vger.kernel.org
 S:     Maintained
 
 F71805F HARDWARE MONITORING DRIVER
@@ -1214,7 +1220,8 @@ HARDWARE MONITORING
 P:     Jean Delvare
 M:     khali@linux-fr.org
 L:     lm-sensors@lm-sensors.org
-W:     http://www.lm-sensors.nu/
+W:     http://www.lm-sensors.org/
+T:     quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-hwmon/
 S:     Maintained
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
@@ -1340,8 +1347,7 @@ I2C SUBSYSTEM
 P:     Jean Delvare
 M:     khali@linux-fr.org
 L:     i2c@lm-sensors.org
-W:     http://www.lm-sensors.nu/
-T:     quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:     quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
 S:     Maintained
 
 I2O
@@ -1673,7 +1679,7 @@ S:        Supported
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 P:     Stephen Tweedie, Andrew Morton
 M:     sct@redhat.com, akpm@osdl.org
-L:     ext2-devel@lists.sourceforge.net
+L:     linux-ext4@vger.kernel.org
 S:     Maintained
 
 K8TEMP HARDWARE MONITORING DRIVER
@@ -2913,7 +2919,6 @@ S:        Maintained
 SUN3/3X
 P:     Sam Creasey
 M:     sammy@sammy.net
-L:     sun3-list@redhat.com
 W:     http://sammy.net/sun3/
 S:     Maintained
 
@@ -3454,6 +3459,12 @@ W:       http://oss.sgi.com/projects/xfs
 T:     git git://oss.sgi.com:8090/xfs/xfs-2.6
 S:     Supported
 
+XILINX UARTLITE SERIAL DRIVER
+P:     Peter Korsgaard
+M:     jacmet@sunsite.dk
+L:     linux-serial@vger.kernel.org
+S:     Maintained
+
 X86 3-LEVEL PAGING (PAE) SUPPORT
 P:     Ingo Molnar
 M:     mingo@redhat.com
index f9da827a0c1880154757981e1430f01f071181f2..ac02e42a2627f359575ae0e689afca911a75e0ff 100644 (file)
@@ -40,7 +40,9 @@ summary from [1.]>" for easy identification by the developers.
 [1.] One line summary of the problem:
 [2.] Full description of the problem/report:
 [3.] Keywords (i.e., modules, networking, kernel):
-[4.] Kernel version (from /proc/version):
+[4.] Kernel information
+[4.1.] Kernel version (from /proc/version):
+[4.2.] Kernel .config file:
 [5.] Most recent kernel version which did not have the bug:
 [6.] Output of Oops.. message (if applicable) with symbolic information
      resolved (see Documentation/oops-tracing.txt)
index ffb7d5423cc00210fc99e1bf5d6b98cd8d68f1fb..3c10b9a1ddf51fa138bb7e7de192d4d70e4d4544 100644 (file)
@@ -516,10 +516,11 @@ sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
                if (bus == 0 && dfn == 0) {
                        hose = pci_isa_hose;
                } else {
-                       dev = pci_find_slot(bus, dfn);
+                       dev = pci_get_bus_and_slot(bus, dfn);
                        if (!dev)
                                return -ENODEV;
                        hose = dev->sysdata;
+                       pci_dev_put(dev);
                }
        }
 
index b8b817feb1eedb8db7be5baa8df5639cb02a4b0f..910b43cd63e830b7f1a8664b3a4833b1a81e2e8e 100644 (file)
@@ -183,11 +183,15 @@ miata_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
        if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
                u8 irq=0;
-
-               if(pci_read_config_byte(pci_find_slot(dev->bus->number, dev->devfn & ~(7)), 0x40,&irq)!=PCIBIOS_SUCCESSFUL)
+               struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
+               if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
+                       pci_dev_put(pdev);
                        return -1;
-               else    
+               }
+               else    {
+                       pci_dev_put(pdev);
                        return irq;
+               }
        }
 
        return COMMON_TABLE_LOOKUP;
index 93744bab73fb24ac63d6ba9406a4a3c4d0a294fb..e7594a7cf5850830c0d5b75ccece2e0914a842bd 100644 (file)
@@ -200,7 +200,7 @@ nautilus_init_pci(void)
        bus = pci_scan_bus(0, alpha_mv.pci_ops, hose);
        hose->bus = bus;
 
-       irongate = pci_find_slot(0, 0);
+       irongate = pci_get_bus_and_slot(0, 0);
        bus->self = irongate;
        bus->resource[1] = &irongate_mem;
 
index 8871529a34e2026e4f2bd4eda531df7ec59808a4..8aa9db834c11551afc1462bf970d2dbc0ab8a157 100644 (file)
@@ -108,7 +108,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 
        /* If we're in an interrupt context, or have no user context,
           we must not take the fault.  */
-       if (!mm || in_interrupt())
+       if (!mm || in_atomic())
                goto no_context;
 
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
index 48cf7fffddf2add8d663fc4db96b019ed3eaea04..f38a60a03b8c93f5b2e36fde8b985dc7196e47a3 100644 (file)
@@ -11,6 +11,7 @@
 #include <linux/signal.h>
 #include <linux/ptrace.h>
 #include <linux/personality.h>
+#include <linux/freezer.h>
 
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
index a611c3b6395491e250cd50be7005b67c5171e307..6dcd10ab4496f765a7681731e85c1a8ee7c36f30 100644 (file)
@@ -55,7 +55,7 @@ static inline void omap_init_irda(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-#if    defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
+#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
 
 #define        OMAP_RTC_BASE           0xfffb4800
 
index 3d211dc2f2f90923136b55a8e814e842463e49d0..01abb0ace234ad823df9ad39b90ab719f1167d4e 100644 (file)
@@ -40,7 +40,7 @@
 
 /* io map for dma */
 static void __iomem *dma_base;
-static kmem_cache_t *dma_kmem;
+static struct kmem_cache *dma_kmem;
 
 struct s3c24xx_dma_selection dma_sel;
 
@@ -1271,7 +1271,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
+static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
 {
        memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
index 5e658a8744984688ee171e16b67a44aee65c1331..9fd6d2eafb40c0bf06e80c0643f7d5bb020f8173 100644 (file)
@@ -230,7 +230,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
         * If we're in an interrupt or have no user
         * context, we must not take the fault..
         */
-       if (in_interrupt() || !mm)
+       if (in_atomic() || !mm)
                goto no_context;
 
        /*
index 047d0a408b9deb25c10a9db2d32c144353ccf193..43dd41be71fb80ac1ac7f0898924c77902b9bd5f 100644 (file)
@@ -620,12 +620,10 @@ ecard_probe(int slot, card_type_t type)
        struct ex_ecid cid;
        int i, rc = -ENOMEM;
 
-       ec = kmalloc(sizeof(ecard_t), GFP_KERNEL);
+       ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
        if (!ec)
                goto nomem;
 
-       memset(ec, 0, sizeof(ecard_t));
-
        ec->slot_no     = slot;
        ec->type        = type;
        ec->irq         = NO_IRQ;
index a1f6d8a9cc32919084d14b5cf9181dbceb013ca6..93c0cee0fb5e142e45c1344548943e48d88bca06 100644 (file)
@@ -215,7 +215,7 @@ int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
         * If we're in an interrupt or have no user
         * context, we must not take the fault..
         */
-       if (in_interrupt() || !mm)
+       if (in_atomic() || !mm)
                goto no_context;
 
        down_read(&mm->mmap_sem);
index 34def6397c3c5c718227f7e17c7dae4877d9cb03..f2901581d4dacd9aba26982c85918cd674f1dbcc 100644 (file)
@@ -24,7 +24,7 @@
 
 #define MEMC_TABLE_SIZE (256*sizeof(unsigned long))
 
-kmem_cache_t *pte_cache, *pgd_cache;
+struct kmem_cache *pte_cache, *pgd_cache;
 int page_nr;
 
 /*
@@ -162,12 +162,12 @@ void __init create_memmap_holes(struct meminfo *mi)
 {
 }
 
-static void pte_cache_ctor(void *pte, kmem_cache_t *cache, unsigned long flags)
+static void pte_cache_ctor(void *pte, struct kmem_cache *cache, unsigned long flags)
 {
        memzero(pte, sizeof(pte_t) * PTRS_PER_PTE);
 }
 
-static void pgd_cache_ctor(void *pgd, kmem_cache_t *cache, unsigned long flags)
+static void pgd_cache_ctor(void *pgd, struct kmem_cache *cache, unsigned long flags)
 {
        memzero(pgd + MEMC_TABLE_SIZE, USER_PTRS_PER_PGD * sizeof(pgd_t));
 }
index ca41fc1edbe1aa26711343a3fcae488899de7882..d0abbcaf1c1e3dac5a6d7eb34313ca0527003d04 100644 (file)
@@ -154,6 +154,7 @@ ss_probe:
        return 1;
 
 no_kprobe:
+       preempt_enable_no_resched();
        return ret;
 }
 
index 33096651c24f64f494b1c4355f8de60fb155af82..0ec14854a2000f272044706265cf0e400c120e77 100644 (file)
@@ -15,7 +15,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
-#include <linux/suspend.h>
+#include <linux/freezer.h>
 
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
index 44ab8a7bdae2705b32f316be2dd7b9947487cd63..b68d669f823de0a39f1f8bedebc3f5bd13429264 100644 (file)
@@ -11,7 +11,7 @@
 #include <asm/addrspace.h>
 #include <asm/cacheflush.h>
 
-void dma_cache_sync(void *vaddr, size_t size, int direction)
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size, int direction)
 {
        /*
         * No need to sync an uncached area
index 934c51078ccee4bafca2b68b7752b1745a63ee03..c73e91f1299a773ec8964f512f169429e16b6175 100644 (file)
@@ -232,7 +232,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
         * context, we must not take the fault..
         */
 
-       if (in_interrupt() || !mm)
+       if (in_atomic() || !mm)
                goto no_context;
 
        down_read(&mm->mmap_sem);
index eae874a970c62f6750b0c6d41a56ab76078f7ac0..14f64b054c7ebe726ee0388f5ee5fe068dc7669c 100644 (file)
--- a/