VIEWING EXECUTING AND QUEUED ITEMS
==================================
-If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available:
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
- /proc/slow_work_rq
+ /sys/kernel/debug/slow_work/runqueue
through which the list of work items being executed and the queues of items to
be executed may be viewed. The owner of a work item is given the chance to
S: Maintained
F: arch/arm/
+ARM PRIMECELL AACI PL041 DRIVER
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
+F: sound/arm/aaci.*
+
+ARM PRIMECELL CLCD PL110 DRIVER
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
+F: drivers/video/amba-clcd.*
+
+ARM PRIMECELL KMI PL050 DRIVER
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
+F: drivers/input/serio/ambakmi.*
+F: include/linux/amba/kmi.h
+
ARM PRIMECELL MMCI PL180/1 DRIVER
S: Orphan
F: drivers/mmc/host/mmci.*
+ARM PRIMECELL BUS SUPPORT
+M: Russell King <linux@arm.linux.org.uk>
+S: Maintained
+F: drivers/amba/
+F: include/linux/amba/bus.h
+
ARM/ADI ROADRUNNER MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: Documentation/i2c/
F: drivers/i2c/
F: include/linux/i2c.h
-F: include/linux/i2c-dev.h
-F: include/linux/i2c-id.h
+F: include/linux/i2c-*.h
I2C-TINY-USB DRIVER
M: Till Harbaum <till@harbaum.org>
/*
* Thread information flags:
* - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
+ * - pending work-to-be-done flags come first and must be assigned to be
+ * within bits 0 to 7 to fit in and immediate operand.
+ * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
+ * control flags.
*
* TIF_SYSCALL_TRACE is known to be 0 via blbs.
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 3 /* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL 4 /* dik recursion lock */
-#define TIF_UAC_NOPRINT 5 /* see sysinfo.h */
-#define TIF_UAC_NOFIX 6
-#define TIF_UAC_SIGBUS 7
-#define TIF_MEMDIE 8
-#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */
-#define TIF_NOTIFY_RESUME 10 /* callback before returning to user */
+#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */
+#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */
+#define TIF_UAC_NOFIX 11
+#define TIF_UAC_SIGBUS 12
+#define TIF_MEMDIE 13
+#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
-#define ALPHA_UAC_SHIFT 6
+#define ALPHA_UAC_SHIFT 10
#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
1 << TIF_UAC_SIGBUS)
* Allocate the info structure.
*/
agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+ if (!agp)
+ return NULL;
/*
* Fill it in.
* Allocate the info structure.
*/
agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+ if (!agp)
+ return NULL;
/*
* Fill it in.
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
#endif
- seq_printf(p, " %14s", irq_desc[irq].chip->typename);
+ seq_printf(p, " %14s", irq_desc[irq].chip->name);
seq_printf(p, " %c%s",
(action->flags & IRQF_DISABLED)?'+':' ',
action->name);
};
static struct irq_chip rtc_irq_type = {
- .typename = "RTC",
+ .name = "RTC",
.startup = rtc_startup,
.shutdown = rtc_enable_disable,
.enable = rtc_enable_disable,
}
struct irq_chip i8259a_irq_type = {
- .typename = "XT-PIC",
+ .name = "XT-PIC",
.startup = i8259a_startup_irq,
.shutdown = i8259a_disable_irq,
.enable = i8259a_enable_irq,
}
static struct irq_chip pyxis_irq_type = {
- .typename = "PYXIS",
+ .name = "PYXIS",
.startup = pyxis_startup_irq,
.shutdown = pyxis_disable_irq,
.enable = pyxis_enable_irq,
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
- .typename = "SRM",
+ .name = "SRM",
.startup = srm_startup_irq,
.shutdown = srm_disable_irq,
.enable = srm_enable_irq,
}
static struct irq_chip alcor_irq_type = {
- .typename = "ALCOR",
+ .name = "ALCOR",
.startup = alcor_startup_irq,
.shutdown = alcor_disable_irq,
.enable = alcor_enable_irq,
}
static struct irq_chip cabriolet_irq_type = {
- .typename = "CABRIOLET",
+ .name = "CABRIOLET",
.startup = cabriolet_startup_irq,
.shutdown = cabriolet_disable_irq,
.enable = cabriolet_enable_irq,
}
static struct irq_chip dp264_irq_type = {
- .typename = "DP264",
+ .name = "DP264",
.startup = dp264_startup_irq,
.shutdown = dp264_disable_irq,
.enable = dp264_enable_irq,
};
static struct irq_chip clipper_irq_type = {
- .typename = "CLIPPER",
+ .name = "CLIPPER",
.startup = clipper_startup_irq,
.shutdown = clipper_disable_irq,
.enable = clipper_enable_irq,
}
static struct irq_chip eb64p_irq_type = {
- .typename = "EB64P",
+ .name = "EB64P",
.startup = eb64p_startup_irq,
.shutdown = eb64p_disable_irq,
.enable = eb64p_enable_irq,
}
static struct irq_chip eiger_irq_type = {
- .typename = "EIGER",
+ .name = "EIGER",
.startup = eiger_startup_irq,
.shutdown = eiger_disable_irq,
.enable = eiger_enable_irq,
}
static struct irq_chip jensen_local_irq_type = {
- .typename = "LOCAL",
+ .name = "LOCAL",
.startup = jensen_local_startup,
.shutdown = jensen_local_shutdown,
.enable = jensen_local_enable,
}
static struct irq_chip marvel_legacy_irq_type = {
- .typename = "LEGACY",
+ .name = "LEGACY",
.startup = marvel_irq_noop_return,
.shutdown = marvel_irq_noop,
.enable = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
- .typename = "LSI",
+ .name = "LSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
.enable = io7_enable_irq,
};
static struct irq_chip io7_msi_irq_type = {
- .typename = "MSI",
+ .name = "MSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
.enable = io7_enable_irq,
}
static struct irq_chip mikasa_irq_type = {
- .typename = "MIKASA",
+ .name = "MIKASA",
.startup = mikasa_startup_irq,
.shutdown = mikasa_disable_irq,
.enable = mikasa_enable_irq,
}
static struct irq_chip noritake_irq_type = {
- .typename = "NORITAKE",
+ .name = "NORITAKE",
.startup = noritake_startup_irq,
.shutdown = noritake_disable_irq,
.enable = noritake_enable_irq,
}
static struct irq_chip rawhide_irq_type = {
- .typename = "RAWHIDE",
+ .name = "RAWHIDE",
.startup = rawhide_startup_irq,
.shutdown = rawhide_disable_irq,
.enable = rawhide_enable_irq,
common_init_isa_dma();
}
-#define RUFFIAN_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
+#define RUFFIAN_LATCH DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
static void __init
ruffian_init_rtc(void)
}
static struct irq_chip rx164_irq_type = {
- .typename = "RX164",
+ .name = "RX164",
.startup = rx164_startup_irq,
.shutdown = rx164_disable_irq,
.enable = rx164_enable_irq,
}
static struct irq_chip sable_lynx_irq_type = {
- .typename = "SABLE/LYNX",
+ .name = "SABLE/LYNX",
.startup = sable_lynx_startup_irq,
.shutdown = sable_lynx_disable_irq,
.enable = sable_lynx_enable_irq,
}
static struct irq_chip takara_irq_type = {
- .typename = "TAKARA",
+ .name = "TAKARA",
.startup = takara_startup_irq,
.shutdown = takara_disable_irq,
.enable = takara_enable_irq,
}
static struct irq_chip titan_irq_type = {
- .typename = "TITAN",
+ .name = "TITAN",
.startup = titan_startup_irq,
.shutdown = titan_disable_irq,
.enable = titan_enable_irq,
}
static struct irq_chip wildfire_irq_type = {
- .typename = "WILDFIRE",
+ .name = "WILDFIRE",
.startup = wildfire_startup_irq,
.shutdown = wildfire_disable_irq,
.enable = wildfire_enable_irq,
KM_TYPE_NR
};
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI (-1)
+#define KM_NMI_PTE (-1)
+#define KM_IRQ_PTE (-1)
+#endif
+
#endif
regs->ARM_sp -= 4;
usp = (u32 __user *)regs->ARM_sp;
- put_user(regs->ARM_pc, usp);
- regs->ARM_pc = KERN_RESTART_CODE;
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
#endif
}
}
pxa27x_freq_table[i].frequency = freq;
pxa27x_freq_table[i].index = i;
}
+ pxa27x_freq_table[i].index = i;
pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
/*
table[i].index = i;
table[i].frequency = freqs[i].cpufreq_mhz * 1000;
}
- table[num].frequency = i;
+ table[num].index = i;
table[num].frequency = CPUFREQ_TABLE_END;
pxa3xx_freqs = freqs;
{
spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+#ifdef CONFIG_MACH_BORZOI
if (machine_is_borzoi()) {
sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
}
+#endif
platform_scoop_config = &spitz_pcmcia_config;
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri Sep 18 21:42:00 2009
+# Last update: Wed Nov 25 22:14:58 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
palmtc MACH_PALMTC PALMTC 918
omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919
mxc30030evb MACH_MXC30030EVB MXC30030EVB 920
-rea_2d MACH_REA_2D REA_2D 921
+rea_cpu2 MACH_REA_2D REA_2D 921
eti3e524 MACH_TI3E524 TI3E524 922
ateb9200 MACH_ATEB9200 ATEB9200 923
auckland MACH_AUCKLAND AUCKLAND 924
mh355 MACH_MH355 MH355 2435
pc7802 MACH_PC7802 PC7802 2436
gnet_sgc MACH_GNET_SGC GNET_SGC 2437
+einstein15 MACH_EINSTEIN15 EINSTEIN15 2438
+cmpd MACH_CMPD CMPD 2439
+davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440
+lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441
+ea313x MACH_EA313X EA313X 2442
+fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443
+fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444
+pelco_moe MACH_PELCO_MOE PELCO_MOE 2445
+minimix27 MACH_MINIMIX27 MINIMIX27 2446
+omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447
+passionc MACH_PASSIONC PASSIONC 2448
+mx27amata MACH_MX27AMATA MX27AMATA 2449
+bgat1 MACH_BGAT1 BGAT1 2450
+buzz MACH_BUZZ BUZZ 2451
+mb9g20 MACH_MB9G20 MB9G20 2452
+yushan MACH_YUSHAN YUSHAN 2453
+lizard MACH_LIZARD LIZARD 2454
+omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455
+smdkv210 MACH_SMDKV210 SMDKV210 2456
+bravo MACH_BRAVO BRAVO 2457
+siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458
+siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459
+sm3k MACH_SM3K SM3K 2460
+acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461
+sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462
+glittertind MACH_GLITTERTIND GLITTERTIND 2463
+omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464
+omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465
+cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466
+torino_s MACH_TORINO_S TORINO_S 2467
+havana MACH_HAVANA HAVANA 2468
+beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469
+vanguard MACH_VANGUARD VANGUARD 2470
+s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471
+cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472
+aster MACH_ASTER ASTER 2473
+voguesv210 MACH_VOGUESV210 VOGUESV210 2474
+acm500x MACH_ACM500X ACM500X 2475
+km9260 MACH_KM9260 KM9260 2476
+nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477
+ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478
+smartq7 MACH_SMARTQ7 SMARTQ7 2479
+at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480
+asusp527 MACH_ASUSP527 ASUSP527 2481
+at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482
+topasa900 MACH_TOPASA900 TOPASA900 2483
+electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484
+mx51grb MACH_MX51GRB MX51GRB 2485
+xea300 MACH_XEA300 XEA300 2486
+htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487
+lima MACH_LIMA LIMA 2488
+csb740 MACH_CSB740 CSB740 2489
+usb_s8815 MACH_USB_S8815 USB_S8815 2490
+watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491
+milkyway MACH_MILKYWAY MILKYWAY 2492
+g4evm MACH_G4EVM G4EVM 2493
+picomod6 MACH_PICOMOD6 PICOMOD6 2494
+omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495
+ip6000 MACH_IP6000 IP6000 2496
+ip6010 MACH_IP6010 IP6010 2497
+utm400 MACH_UTM400 UTM400 2498
+omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499
+wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500
+sx560 MACH_SX560 SX560 2501
+ts41x MACH_TS41X TS41X 2502
+elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503
+rhobot MACH_RHOBOT RHOBOT 2504
+mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505
+ls9260 MACH_LS9260 LS9260 2506
+shank MACH_SHANK SHANK 2507
+qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508
+at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509
+hiram MACH_HIRAM HIRAM 2510
+phy3250 MACH_PHY3250 PHY3250 2511
+ea3250 MACH_EA3250 EA3250 2512
+fdi3250 MACH_FDI3250 FDI3250 2513
+whitestone MACH_WHITESTONE WHITESTONE 2514
+at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515
+ccmx51 MACH_CCMX51 CCMX51 2516
+ccmx51js MACH_CCMX51JS CCMX51JS 2517
+ccwmx51 MACH_CCWMX51 CCWMX51 2518
+ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519
+mini6410 MACH_MINI6410 MINI6410 2520
+tiny6410 MACH_TINY6410 TINY6410 2521
+nano6410 MACH_NANO6410 NANO6410 2522
+at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523
+htcleo MACH_HTCLEO HTCLEO 2524
+avp13 MACH_AVP13 AVP13 2525
+xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526
+vpnext MACH_VPNEXT VPNEXT 2527
+swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528
+tx51 MACH_TX51 TX51 2529
+dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530
+mx28evk MACH_MX28EVK MX28EVK 2531
+phoenix260 MACH_PHOENIX260 PHOENIX260 2532
+uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533
+smartq5 MACH_SMARTQ5 SMARTQ5 2534
+all3078 MACH_ALL3078 ALL3078 2535
+ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536
+siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537
+epb5000 MACH_EPB5000 EPB5000 2538
+hy9263 MACH_HY9263 HY9263 2539
+acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540
+acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541
+acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542
+acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543
+acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544
+bonnell MACH_BONNELL BONNELL 2545
+oht_mx27 MACH_OHT_MX27 OHT_MX27 2546
+htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547
+davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548
+c3ax03 MACH_C3AX03 C3AX03 2549
+mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
+esyx MACH_ESYX ESYX 2551
+bulldog MACH_BULLDOG BULLDOG 2553
void blackfin_dma_resume(void)
{
int i;
- for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i)
- dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+
+ for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+ dma_ch[i].regs->cfg = 0;
+
+ if (i < MAX_DMA_SUSPEND_CHANNELS)
+ dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+ }
}
#endif
#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
+#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
d_cache |= CPLB_L1_AOW | CPLB_WT;
#endif
#endif
regs->pc = new_ip;
if (current->mm)
regs->p5 = current->mm->start_data;
-#ifdef CONFIG_SMP
+#ifndef CONFIG_SMP
task_thread_info(current)->l1_task_info.stack_start =
(void *)current->mm->context.stack_start;
task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
copied = access_process_vm(child, addr, &data,
- to_copy, 0);
+ to_copy, 1);
if (copied)
break;
/*
- * File: include/asm-blackfin/mach-bf518/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
#define ANOMALY_05000461 (1)
/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
#define ANOMALY_05000462 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
#endif
/*
- * File: include/asm-blackfin/mach-bf527/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
* - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
- * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
+ * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define ANOMALY_05000467 (1)
/* PLL Latches Incorrect Settings During Reset */
#define ANOMALY_05000469 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
#endif
/*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
#endif
/*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
#endif
/*
- * File: include/asm-blackfin/mach-bf538/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
#endif
/*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000466 (1)
/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
#define ANOMALY_05000467 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
+#define ANOMALY_05000474 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
-#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
\reg\().h = _corelock;
.endm
+.macro safe_testset addr:req, scratch:req
+#if ANOMALY_05000477
+ cli \scratch;
+ testset (\addr);
+ sti \scratch;
+#else
+ testset (\addr);
+#endif
+.endm
+
/*
* r0 = address of atomic data to flush and invalidate (32bit).
*
cli r0;
coreslot_loadaddr p0;
.Lretry_corelock:
- testset (p0);
+ safe_testset p0, r2;
if cc jump .Ldone_corelock;
SSYNC(r2);
jump .Lretry_corelock
cli r0;
coreslot_loadaddr p0;
.Lretry_corelock_noflush:
- testset (p0);
+ safe_testset p0, r2;
if cc jump .Ldone_corelock_noflush;
SSYNC(r2);
jump .Lretry_corelock_noflush
/*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
/* False Hardware Error Exception when ISR Context Is Not Restored */
-#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* Temporarily walk around for bug 5423 till this issue is confirmed by
+ * official anomaly document. It looks 05000281 still exists on bf561
+ * v0.5.
+ */
+#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5)
/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (1)
/* Reads Will Receive Incorrect Data under Certain Conditions */
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000119 (0)
#define ANOMALY_05000450 (0)
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
#endif
(!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
#endif
+
+#if ANOMALY_05000475 && \
+ (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory"
+#endif
if (cpu_is_offline(cpu))
return;
- msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
if (!msg)
return;
- memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_RESCHEDULE;
if (cpus_empty(callmap))
return;
- msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
if (!msg)
return;
- memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_CPU_STOP;
select SWAP_IO_SPACE
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
- select SYS_HAS_EARLY_PRINTK
+ #
+ # Disable EARLY_PRINTK for now since it leads to overwritten prom
+ # memory during early boot on some machines.
+ #
+ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+ # for a more details discussion
+ #
+ # select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SGI_HAS_ZILOG
select SWAP_IO_SPACE
select SYS_HAS_CPU_R10000
- select SYS_HAS_EARLY_PRINTK
+ #
+ # Disable EARLY_PRINTK for now since it leads to overwritten prom
+ # memory during early boot on some machines.
+ #
+ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+ # for a more details discussion
+ #
+ # select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help
config PAGE_SIZE_4KB
bool "4kB"
+ depends on !CPU_LOONGSON2
help
This option select the standard 4kB Linux page size. On some
R3000-family processors this is the only available page size. Using
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on !NUMA
+ depends on !NUMA && !CPU_LOONGSON2
config ARCH_DISCONTIGMEM_ENABLE
bool
#define MADV_MERGEABLE 12 /* KSM may merge identical pages */
#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */
+#define MADV_HWPOISON 100 /* poison a page for testing */
/* compatibility flags */
#define MAP_FILE 0
#ifndef _ASM_SYSTEM_H
#define _ASM_SYSTEM_H
+#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/irqflags.h>
#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
#endif
-/* This function doesn't exist, so you'll get a linker error
- if something tries to do an invalid xchg(). */
-extern void __xchg_called_with_bad_pointer(void);
-
static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
{
switch (size) {
case 8:
return __xchg_u64(ptr, x);
}
- __xchg_called_with_bad_pointer();
+
return x;
}
-#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x) \
+({ \
+ BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc); \
+ \
+ ((__typeof__(*(ptr))) \
+ __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \
+})
extern void set_handler(unsigned long offset, void *addr, unsigned long len);
extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
KM_TYPE_NR
};
+/*
+ * This is a temporary build fix that (so they say on lkml....) should no longer
+ * be required after 2.6.33, because of changes planned to the kmap code.
+ * Let's try to remove this cruft then.
+ */
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI (-1)
+#define KM_NMI_PTE (-1)
+#define KM_IRQ_PTE (-1)
+#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KMAP_TYPES_H */
struct crypto_gcm_ghash_ctx {
unsigned int cryptlen;
struct scatterlist *src;
- crypto_completion_t complete;
+ void (*complete)(struct aead_request *req, int err);
};
struct crypto_gcm_req_priv_ctx {
return crypto_ahash_final(ahreq);
}
-static void gcm_hash_final_done(struct crypto_async_request *areq,
- int err)
+static void __gcm_hash_final_done(struct aead_request *req, int err)
{
- struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
if (!err)
crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
- gctx->complete(areq, err);
+ gctx->complete(req, err);
}
-static void gcm_hash_len_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_final_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_final_done(req, err);
+}
+
+static void __gcm_hash_len_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err) {
return;
}
- gcm_hash_final_done(areq, err);
+ __gcm_hash_final_done(req, err);
}
-static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_len_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_len_done(req, err);
+}
+
+static void __gcm_hash_crypt_remain_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err) {
return;
}
- gcm_hash_len_done(areq, err);
+ __gcm_hash_len_done(req, err);
}
-static void gcm_hash_crypt_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
+ int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_crypt_remain_done(req, err);
+}
+
+static void __gcm_hash_crypt_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
unsigned int remain;
return;
}
- gcm_hash_crypt_remain_done(areq, err);
+ __gcm_hash_crypt_remain_done(req, err);
}
-static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_crypt_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_crypt_done(req, err);
+}
+
+static void __gcm_hash_assoc_remain_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
crypto_completion_t complete;
}
if (remain)
- gcm_hash_crypt_done(areq, err);
+ __gcm_hash_crypt_done(req, err);
else
- gcm_hash_crypt_remain_done(areq, err);
+ __gcm_hash_crypt_remain_done(req, err);
}
-static void gcm_hash_assoc_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
+ int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_assoc_remain_done(req, err);
+}
+
+static void __gcm_hash_assoc_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
unsigned int remain;
return;
}
- gcm_hash_assoc_remain_done(areq, err);
+ __gcm_hash_assoc_remain_done(req, err);
}
-static void gcm_hash_init_done(struct crypto_async_request *areq,
- int err)
+static void gcm_hash_assoc_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+
+ __gcm_hash_assoc_done(req, err);
+}
+
+static void __gcm_hash_init_done(struct aead_request *req, int err)
+{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
crypto_completion_t complete;
unsigned int remain = 0;
}
if (remain)
- gcm_hash_assoc_done(areq, err);
+ __gcm_hash_assoc_done(req, err);
else
- gcm_hash_assoc_remain_done(areq, err);
+ __gcm_hash_assoc_remain_done(req, err);
+}
+
+static void gcm_hash_init_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+
+ __gcm_hash_init_done(req, err);
}
static int gcm_hash(struct aead_request *req,
crypto_aead_authsize(aead), 1);
}
-static void gcm_enc_hash_done(struct crypto_async_request *areq,
- int err)
+static void gcm_enc_hash_done(struct aead_request *req, int err)
{
- struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err)
aead_request_complete(req, err);
}
-static void gcm_encrypt_done(struct crypto_async_request *areq,
- int err)
+static void gcm_encrypt_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
err = gcm_hash(req, pctx);
if (err == -EINPROGRESS || err == -EBUSY)
return;
+ else if (!err) {
+ crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
+ gcm_enc_copy_hash(req, pctx);
+ }
}
- gcm_enc_hash_done(areq, err);
+ aead_request_complete(req, err);
}
static int crypto_gcm_encrypt(struct aead_request *req)
aead_request_complete(req, err);
}
-static void gcm_dec_hash_done(struct crypto_async_request *areq, int err)
+static void gcm_dec_hash_done(struct aead_request *req, int err)
{
- struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
struct ablkcipher_request *abreq = &pctx->u.abreq;
struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
err = crypto_ablkcipher_decrypt(abreq);
if (err == -EINPROGRESS || err == -EBUSY)
return;
+ else if (!err)
+ err = crypto_gcm_verify(req, pctx);
}
- gcm_decrypt_done(areq, err);
+ aead_request_complete(req, err);
}
static int crypto_gcm_decrypt(struct aead_request *req)
/* if non-blocking mode is set we can pass directly to open unless
the port has just hung up or is in another error state */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
+ if (tty->flags & (1 << TTY_IO_ERROR)) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+ if (filp->f_flags & O_NONBLOCK) {
/* Indicate we are open */
if (tty->termios->c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
/* Padlock in ECB mode fetches at least ecb_fetch_bytes of data.
* We could avoid some copying here but it's probably not worth it.
*/
- if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) {
+ if (unlikely(((unsigned long)in & ~PAGE_MASK) + ecb_fetch_bytes > PAGE_SIZE)) {
ecb_crypt_copy(in, out, key, cword, count);
return;
}
u8 *iv, struct cword *cword, int count)
{
/* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */
- if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE))
+ if (unlikely(((unsigned long)in & ~PAGE_MASK) + cbc_fetch_bytes > PAGE_SIZE))
return cbc_crypt_copy(in, out, key, iv, cword, count);
return rep_xcrypt_cbc(in, out, key, iv, cword, count);
return 0;
out_irq:
- free_irq(alg_data->irq, alg_data);
+ free_irq(alg_data->irq, i2c_pnx->adapter);
out_clock:
i2c_pnx->set_clock_stop(pdev);
out_unmap:
struct i2c_adapter *adap = i2c_pnx->adapter;
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
- free_irq(alg_data->irq, alg_data);
+ free_irq(alg_data->irq, i2c_pnx->adapter);
i2c_del_adapter(adap);
i2c_pnx->set_clock_stop(pdev);
iounmap((void *)alg_data->ioaddr);
static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
{
+ struct tsl2550_data *data = i2c_get_clientdata(client);
u8 ch0, ch1;
int ret;
ret = tsl2550_calculate_lux(ch0, ch1);
if (ret < 0)
return ret;
+ if (data->operating_mode == 1)
+ ret *= 5;
return sprintf(buf, "%d\n", ret);
}
{
int res = 0;
struct i2c_adapter *found;
+ struct i2c_client *client, *next;
/* First make sure that this adapter was ever added */
mutex_lock(&core_lock);
if (res)
return res;
+ /* Remove devices instantiated from sysfs */
+ list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+ if (client->adapter == adap) {
+ dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
+ client->name, client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ }
+ }
+
/* Detach any active clients. This can't fail, thus we do not
checking the returned value. */
res = device_for_each_child(&adap->dev, NULL, __unregister_client);
struct i2c_msg msg[2];
u8 msgbuf[2];
struct i2c_client *client;
+ unsigned long timeout, read_time;
int status, i;
memset(msg, 0, sizeof(msg));
if (count > io_limit)
count = io_limit;
- /* Smaller eeproms can work given some SMBus extension calls */
if (at24->use_smbus) {
+ /* Smaller eeproms can work given some SMBus extension calls */
if (count > I2C_SMBUS_BLOCK_MAX)
count = I2C_SMBUS_BLOCK_MAX;
- status = i2c_smbus_read_i2c_block_data(client, offset,
- count, buf);
- dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
- count, offset, status);
- return (status < 0) ? -EIO : status;
+ } else {
+ /*
+ * When we have a better choice than SMBus calls, use a
+ * combined I2C message. Write address; then read up to
+ * io_limit data bytes. Note that read page rollover helps us
+ * here (unlike writes). msgbuf is u8 and will cast to our
+ * needs.
+ */
+ i = 0;
+ if (at24->chip.flags & AT24_FLAG_ADDR16)
+ msgbuf[i++] = offset >> 8;
+ msgbuf[i++] = offset;
+
+ msg[0].addr = client->addr;
+ msg[0].buf = msgbuf;
+ msg[0].len = i;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = buf;
+ msg[1].len = count;
}
/*
- * When we have a better choice than SMBus calls, use a combined
- * I2C message. Write address; then read up to io_limit data bytes.
- * Note that read page rollover helps us here (unlike writes).
- * msgbuf is u8 and will cast to our needs.
+ * Reads fail if the previous write didn't complete yet. We may
+ * loop a few times until this one succeeds, waiting at least
+ * long enough for one entire page write to work.
*/
- i = 0;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msgbuf[i++] = offset >> 8;
- msgbuf[i++] = offset;
-
- msg[0].addr = client->addr;
- msg[0].buf = msgbuf;
- msg[0].len = i;
+ timeout = jiffies + msecs_to_jiffies(write_timeout);
+ do {
+ read_time = jiffies;
+ if (at24->use_smbus) {
+ status = i2c_smbus_read_i2c_block_data(client, offset,
+ count, buf);
+ } else {
+ status = i2c_transfer(client->adapter, msg, 2);
+ if (status == 2)
+ status = count;
+ }
+ dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+ count, offset, status, jiffies);
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].buf = buf;
- msg[1].len = count;
+ if (status == count)
+ return count;
- status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
- count, offset, status);
+ /* REVISIT: at HZ=100, this is sloooow */
+ msleep(1);
+ } while (time_before(read_time, timeout));
- if (status == 2)
- return count;
- else if (status >= 0)
- return -EIO;
- else
- return status;
+ return -ETIMEDOUT;
}
static ssize_t at24_read(struct at24_data *at24,
return -ENXIO;
}
+ if (priv->stations[sta_id].tid[tid].agg.state ==
+ IWL_EMPTYING_HW_QUEUE_ADDBA) {
+ IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
+ ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+ priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
+ return 0;
+ }
+
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
- IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n");
+ IWL_WARN(priv, "Stopping AGG while state not ON or starting\n");
tid_data = &priv->stations[sta_id].tid[tid];
ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
return;
}
spin_unlock_irqrestore(shost->host_lock, flags);
- mutex_unlock(&shost->scan_mutex);
scsi_forget_host(shost);
+ mutex_unlock(&shost->scan_mutex);
scsi_proc_host_rm(shost);
spin_lock_irqsave(shost->host_lock, flags);
return SCSI_SCAN_LUN_PRESENT;
}
-static inline void scsi_destroy_sdev(struct scsi_device *sdev)
-{
- scsi_device_set_state(sdev, SDEV_DEL);
- if (sdev->host->hostt->slave_destroy)
- sdev->host->hostt->slave_destroy(sdev);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- put_device(&sdev->sdev_gendev);
-}
-
#ifdef CONFIG_SCSI_LOGGING
/**
* scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
}
}
} else
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
out:
return res;
}
/*
* the sdev we used didn't appear in the report luns scan
*/
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
return ret;
}
shost_for_each_device(sdev, shost) {
if (!scsi_host_scan_allowed(shost) ||
scsi_sysfs_add_sdev(sdev) != 0)
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
}
}
{
BUG_ON(sdev->id != sdev->host->this_id);
- scsi_destroy_sdev(sdev);
+ __scsi_remove_device(sdev);
}
EXPORT_SYMBOL(scsi_free_host_dev);
transport_configure_device(&starget->dev);
error = device_add(&sdev->sdev_gendev);
if (error) {
- put_device(sdev->sdev_gendev.parent);
printk(KERN_INFO "error 1\n");
- return error;
+ goto out_remove;
}
error = device_add(&sdev->sdev_dev);
if (error) {
printk(KERN_INFO "error 2\n");
- goto clean_device;
+ device_del(&sdev->sdev_gendev);
+ goto out_remove;
}
+ transport_add_device(&sdev->sdev_gendev);
+ sdev->is_visible = 1;
/* create queue files, which may be writable, depending on the host */
if (sdev->host->hostt->change_queue_depth)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
- if (error) {
- __scsi_remove_device(sdev);
- goto out;
- }
+ if (error)
+ goto out_remove;
+
if (sdev->host->hostt->change_queue_type)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw);
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type);
- if (error) {
- __scsi_remove_device(sdev);
- goto out;
- }
+ if (error)
+ goto out_remove;
error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL);
if (error)
+ /* we're treating error on bsg register as non-fatal,
+ * so pretend nothing went wrong */
sdev_printk(KERN_INFO, sdev,
"Failed to register bsg queue, errno=%d\n", error);
- /* we're treating error on bsg register as non-fatal, so pretend
- * nothing went wrong */
- error = 0;
-
/* add additional host specific attributes */
if (sdev->host->hostt->sdev_attrs) {
for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
error = device_create_file(&sdev->sdev_gendev,
sdev->host->hostt->sdev_attrs[i]);
- if (error) {
- __scsi_remove_device(sdev);
- goto out;
- }
+ if (error)
+ goto out_remove;
}
}
- transport_add_device(&sdev->sdev_gendev);
- out:
- return error;
-
- clean_device:
- scsi_device_set_state(sdev, SDEV_CANCEL);
-
- device_del(&sdev->sdev_gendev);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- put_device(&sdev->sdev_gendev);
+ return 0;
+ out_remove:
+ __scsi_remove_device(sdev);
return error;
+
}
void __scsi_remove_device(struct scsi_device *sdev)
{
struct device *dev = &sdev->sdev_gendev;
- if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
- return;
+ if (sdev->is_visible) {
+ if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+ return;
- bsg_unregister_queue(sdev->request_queue);
- device_unregister(&sdev->sdev_dev);
- transport_remove_device(dev);
- device_del(dev);
+ bsg_unregister_queue(sdev->request_queue);
+ device_unregister(&sdev->sdev_dev);
+ transport_remove_device(dev);
+ device_del(dev);
+ } else
+ put_device(&sdev->sdev_dev);
scsi_device_set_state(sdev, SDEV_DEL);
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
__func__, virt, phys, be32_to_cpu(sdt->ref_tag),
be16_to_cpu(sdt->app_tag));
- return -EIO;
+ return -EILSEQ;
}
/*
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
- tty = port->info->port.tty;
+ tty = port->state->port.tty;
do {
unsigned int iestat, c, cstat;
char flag;
return;
}
- xmit = &port->info->xmit;
+ xmit = &port->state->xmit;
if (uart_circ_empty(xmit))
goto txq_empty;
static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
static inline int
hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
tt, NULL, 0, 1000);
}
tmp &= AMD_UNMASK_BIT(ep->num);
writel(tmp, &dev->regs->ep_irqmsk);
}
- }
+ } else if (ep->in) {
+ /* enable ep irq */
+ tmp = readl(&dev->regs->ep_irqmsk);
+ tmp &= AMD_UNMASK_BIT(ep->num);
+ writel(tmp, &dev->regs->ep_irqmsk);
+ }
} else if (ep->dma) {
{
int tmp;
- /* empty queues and init hardware */
- udc_basic_init(dev);
- for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
- empty_req_queue(&dev->ep[tmp]);
- }
-
if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
}
- /* init */
+
+ /* empty queues and init hardware */
+ udc_basic_init(dev);
+ for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+ empty_req_queue(&dev->ep[tmp]);
+
udc_setup_endpoints(dev);
}
}
}
+ } else if (!use_dma && ep->in) {
+ /* disable interrupt */
+ tmp = readl(
+ &dev->regs->ep_irqmsk);
+ tmp |= AMD_BIT(ep->num);
+ writel(tmp,
+ &dev->regs->ep_irqmsk);
}
}
/* clear status bits */
goto finished;
}
+ spin_lock_init(&dev->lock);
+ /* udc csr registers base */
+ dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+ /* dev registers base */
+ dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+ /* ep registers base */
+ dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+ /* fifo's base */
+ dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+ dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev);
udc_pollstall_timer.data = 0;
/* device struct setup */
- spin_lock_init(&dev->lock);
dev->gadget.ops = &udc_ops;
dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.name = name;
dev->gadget.is_dualspeed = 1;
- /* udc csr registers base */
- dev->csr = dev->virt_addr + UDC_CSR_ADDR;
- /* dev registers base */
- dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
- /* ep registers base */
- dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
- /* fifo's base */
- dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
- dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
-
/* init registers, interrupts, ... */
startup_registers(dev);
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
+#include <linux/ktime.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
msleep(5);
up_write(&ehci_cf_port_reset_rwsem);
+ ehci->last_periodic_enable = ktime_get_real();
temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci_info (ehci,
switch (pdev->vendor) {
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
+ if (pdev->device == 0x27cc) {
+ ehci->broken_periodic = 1;
+ ehci_info(ehci, "using broken periodic workaround\n");
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
* we must clear the TT buffer (11.17.5).
*/
if (unlikely(last_status != -EINPROGRESS &&
- last_status != -EREMOTEIO))
- ehci_clear_tt_buffer(ehci, qh, urb, token);
+ last_status != -EREMOTEIO)) {
+ /* The TT's in some hubs malfunction when they
+ * receive this request following a STALL (they
+ * stop sending isochronous packets). Since a
+ * STALL can't leave the TT buffer in a busy
+ * state (if you believe Figures 11-48 - 11-51
+ * in the USB 2.0 spec), we won't clear the TT
+ * buffer in this case. Strictly speaking this
+ * is a violation of the spec.
+ */
+ if (last_status != -EPIPE)
+ ehci_clear_tt_buffer(ehci, qh, urb,
+ token);
+ }
}
/* if we're removing something not at the queue head,
/* make sure ehci_work scans these */
ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
% (ehci->periodic_size << 3);
+ if (unlikely(ehci->broken_periodic))
+ ehci->last_periodic_enable = ktime_get_real();
return 0;
}
if (--ehci->periodic_sched)
return 0;
+ if (unlikely(ehci->broken_periodic)) {
+ /* delay experimentally determined */
+ ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000);
+ ktime_t now = ktime_get_real();
+ s64 delay = ktime_us_delta(safe, now);
+
+ if (unlikely(delay > 0))
+ udelay(delay);
+ }
+
/* did setting PSE not take effect yet?
* takes effect only at frame boundaries...
*/
unsigned stamp;
unsigned random_frame;
unsigned long next_statechange;
+ ktime_t last_periodic_enable;
u32 command;
/* SILICON QUIRKS */
unsigned big_endian_desc:1;
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
+ unsigned broken_periodic:1;
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
musb_writew(regs, MUSB_TXCSR, value);
musb_writew(regs, MUSB_TXCSR, value);
- /* re-enable interrupt */
- if (enabled)
- musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
- (1 << cppi_ch->index));
-
/* While we scrub the TX state RAM, ensure that we clean
* up any interrupt that's currently asserted:
* 1. Write to completion Ptr value 0x1(bit 0 set)
cppi_reset_tx(tx_ram, 1);
musb_writel(&tx_ram->tx_complete, 0, 0);
+ /* re-enable interrupt */
+ if (enabled)
+ musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+ (1 << cppi_ch->index));
+
cppi_dump_tx(5, cppi_ch, " (done teardown)");
/* REVISIT tx side _should_ clean up the same way
#endif
if (hw_ep->max_packet_sz_tx) {
- printk(KERN_DEBUG
+ DBG(1,
"%s: hw_ep %d%s, %smax %d\n",
musb_driver_name, i,
hw_ep->is_shared_fifo ? "shared" : "tx",
hw_ep->max_packet_sz_tx);
}
if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
- printk(KERN_DEBUG
+ DBG(1,
"%s: hw_ep %d%s, %smax %d\n",
musb_driver_name, i,
"rx",
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
csr |= MUSB_TXCSR_P_WZC_BITS;
csr &= ~MUSB_TXCSR_P_SENTSTALL;
musb_writew(epio, MUSB_TXCSR, csr);
- if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
- dma->status = MUSB_DMA_STATUS_CORE_ABORT;
- musb->dma_controller->channel_abort(dma);
- }
-
- if (request)
- musb_g_giveback(musb_ep, request, -EPIPE);
-
break;
}
*/
static void rxstate(struct musb *musb, struct musb_request *req)
{
- u16 csr = 0;
const u8 epnum = req->epnum;
struct usb_request *request = &req->request;
struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
void __iomem *epio = musb->endpoints[epnum].regs;
unsigned fifo_count = 0;
u16 len = musb_ep->packet_sz;
+ u16 csr = musb_readw(epio, MUSB_RXCSR);
- csr = musb_readw(epio, MUSB_RXCSR);
+ /* We shouldn't get here while DMA is active, but we do... */
+ if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+ DBG(4, "DMA pending...\n");
+ return;
+ }
+
+ if (csr & MUSB_RXCSR_P_SENDSTALL) {
+ DBG(5, "%s stalling, RXCSR %04x\n",
+ musb_ep->end_point.name, csr);
+ return;
+ }
if (is_cppi_enabled() && musb_ep->dma) {
struct dma_controller *c = musb->dma_controller;
csr, dma ? " (dma)" : "", request);
if (csr & MUSB_RXCSR_P_SENTSTALL) {
- if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
- dma->status = MUSB_DMA_STATUS_CORE_ABORT;
- (void) musb->dma_controller->channel_abort(dma);
- request->actual += musb_ep->dma->actual_len;
- }
-
csr |= MUSB_RXCSR_P_WZC_BITS;
csr &= ~MUSB_RXCSR_P_SENTSTALL;
musb_writew(epio, MUSB_RXCSR, csr);
-
- if (request)
- musb_g_giveback(musb_ep, request, -EPIPE);
- goto done;
+ return;
}
if (csr & MUSB_RXCSR_P_OVERRUN) {
DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
"%s busy, csr %04x\n",
musb_ep->end_point.name, csr);
- goto done;
+ return;
}
if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
if ((request->actual < request->length)
&& (musb_ep->dma->actual_len
== musb_ep->packet_sz))
- goto done;
+ return;
#endif
musb_g_giveback(musb_ep, request, 0);
request = next_request(musb_ep);
if (!request)
- goto done;
-
- /* don't start more i/o till the stall clears */
- musb_ep_select(mbase, epnum);
- csr = musb_readw(epio, MUSB_RXCSR);
- if (csr & MUSB_RXCSR_P_SENDSTALL)
- goto done;
+ return;
}
-
/* analyze request if the ep is hot */
if (request)
rxstate(musb, to_musb_request(request));
DBG(3, "packet waiting for %s%s request\n",
musb_ep->desc ? "" : "inactive ",
musb_ep->end_point.name);
-
-done:
return;
}
void __iomem *mbase;
unsigned long flags;
u16 csr;
- struct musb_request *request = NULL;
+ struct musb_request *request;
int status = 0;
if (!ep)
musb_ep_select(mbase, epnum);
- /* cannot portably stall with non-empty FIFO */
request = to_musb_request(next_request(musb_ep));
- if (value && musb_ep->is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- DBG(3, "%s fifo busy, cannot halt\n", ep->name);
- spin_unlock_irqrestore(&musb->lock, flags);
- return -EAGAIN;
+ if (value) {
+ if (request) {
+ DBG(3, "request in progress, cannot halt %s\n",
+ ep->name);
+ status = -EAGAIN;
+ goto done;
+ }
+ /* Cannot portably stall with non-empty FIFO */
+ if (musb_ep->is_in) {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+ DBG(3, "FIFO busy, cannot halt %s\n", ep->name);
+ status = -EAGAIN;
+ goto done;
+ }
}
-
}
/* set/clear the stall and toggle bits */
DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
if (musb_ep->is_in) {
csr = musb_readw(epio, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_FIFONOTEMPTY)
- csr |= MUSB_TXCSR_FLUSHFIFO;
csr |= MUSB_TXCSR_P_WZC_BITS
| MUSB_TXCSR_CLRDATATOG;
if (value)
musb_writew(epio, MUSB_RXCSR, csr);
}
-done:
-
/* maybe start the first request in the queue */
if (!musb_ep->busy && !value && request) {
DBG(3, "restarting the request\n");
musb_ep_restart(musb, request);
}
+done:
spin_unlock_irqrestore(&musb->lock, flags);
return status;
}
/* update the flags */
if (fifo_count < MUSB_MAX_END0_PACKET
- || request->actual == request->length) {
+ || (request->actual == request->length
+ && !request->zero)) {
musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
csr |= MUSB_CSR0_P_DATAEND;
} else
return;
} else if (usb_pipeisoc(pipe) && dma) {
if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
- offset, length))
+ offset, length)) {
+ if (is_cppi_enabled() || tusb_dma_omap())
+ musb_h_tx_dma_start(hw_ep);
return;
+ }
} else if (tx_csr & MUSB_TXCSR_DMAENAB) {
DBG(1, "not complete, but DMA enabled?\n");
return;
return;
}
/* account for transferred data */
- countback = urb->actual_length;
+ countback = urb->transfer_buffer_length;
data_offset = priv->write_offset;
if (data_offset > 0) {
/* Subtract the control bytes */
if (status) {
dbg("nonzero write bulk status received: %d", status);
- return;
}
usb_serial_port_softint(port);
#define AIRPLUS_VENDOR_ID 0x1011
#define AIRPLUS_PRODUCT_MCD650 0x3198
+/* 4G Systems products */
+#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e
+#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
+ { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static struct platform_driver platform_wdt_driver = {
.driver = {
- .name = "watchdog",
+ .name = "pnx4008-watchdog",
.owner = THIS_MODULE,
},
.probe = pnx4008_wdt_probe,
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:watchdog");
+MODULE_ALIAS("platform:pnx4008-watchdog");
BUG_ON(!vcookie->fscache);
- return fscache_maybe_release_page(vnode->cache, page, gfp);
+ return fscache_maybe_release_page(vcookie->fscache, page, gfp);
}
void __v9fs_fscache_invalidate_page(struct page *page)
#include <linux/mount.h>
#include <linux/file.h>
+#include <linux/ima.h>
#include "internal.h"
/*
if (IS_ERR(file)) {
ret = PTR_ERR(file);
} else {
+ ima_counts_get(file);
ret = -EIO;
if (file->f_op->write) {
pos = (loff_t) page->index << PAGE_SHIFT;
+Version 1.61
+------------
+Fix append problem to Samba servers (files opened with O_APPEND could
+have duplicated data). Fix oops in cifs_lookup. Workaround problem
+mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session.
+Disable use of server inode numbers when server only
+partially supports them (e.g. for one server querying inode numbers on
+FindFirst fails but QPathInfo queries works).
+
Version 1.60
-------------
Fix memory leak in reconnect. Fix oops in DFS mount error path.
posix_flags |= SMB_O_EXCL;
if (oflags & O_TRUNC)
posix_flags |= SMB_O_TRUNC;
- if (oflags & O_APPEND)
- posix_flags |= SMB_O_APPEND;
if (oflags & O_SYNC)
posix_flags |= SMB_O_SYNC;
if (oflags & O_DIRECTORY)
* O_EXCL: optimize away the lookup, but don't hash the dentry. Let
* the VFS handle the create.
*/
- if (nd->flags & LOOKUP_EXCL) {
+ if (nd && (nd->flags & LOOKUP_EXCL)) {
d_instantiate(direntry, NULL);
- return 0;
+ return NULL;
}
/* can not grab the rename sem here since it would
* reduction in network traffic in the other paths.
*/
if (pTcon->unix_ext) {
- if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+ if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
(nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
(nd->intent.open.flags & O_CREAT)) {
rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
#include <linux/timer.h>
struct slow_work;
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
struct seq_file;
#endif
/* execute a work item */
void (*execute)(struct slow_work *work);
-#ifdef CONFIG_SLOW_WORK_PROC
- /* describe a work item for /proc */
+#ifdef CONFIG_SLOW_WORK_DEBUG
+ /* describe a work item for debugfs */
void (*desc)(struct slow_work *work, struct seq_file *m);
#endif
};
#define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */
const struct slow_work_ops *ops; /* operations table for this item */
struct list_head link; /* link in queue */
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
struct timespec mark; /* jiffies at which queued or exec begun */
#endif
};
*
* These flags are used with the ampdu_action() callback in
* &struct ieee80211_ops to indicate which action is needed.
+ *
+ * Note that drivers MUST be able to deal with a TX aggregation
+ * session being stopped even before they OK'ed starting it by
+ * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer
+ * might receive the addBA frame and send a delBA right away!
+ *
* @IEEE80211_AMPDU_RX_START: start Rx aggregation
* @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
* @IEEE80211_AMPDU_TX_START: start Tx aggregation
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
unsigned last_sector_bug:1; /* do not use multisector accesses on
SD_LAST_BUGGY_SECTORS */
+ unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
struct list_head event_list; /* asserted events */
See Documentation/slow-work.txt.
-config SLOW_WORK_PROC
- bool "Slow work debugging through /proc"
+config SLOW_WORK_DEBUG
+ bool "Slow work debugging through debugfs"
default n
- depends on SLOW_WORK && PROC_FS
+ depends on SLOW_WORK && DEBUG_FS
help
- Display the contents of the slow work run queue through /proc,
+ Display the contents of the slow work run queue through debugfs,
including items currently executing.
See Documentation/slow-work.txt.
obj-$(CONFIG_RING_BUFFER) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_SLOW_WORK) += slow-work.o
-obj-$(CONFIG_SLOW_WORK_PROC) += slow-work-proc.o
+obj-$(CONFIG_SLOW_WORK_DEBUG) += slow-work-debugfs.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
}
/*
- * Describe a slow work item for /proc
+ * Describe a slow work item for debugfs
*/
static int slow_work_runqueue_show(struct seq_file *m, void *v)
{
};
/*
- * open "/proc/slow_work_rq" to list queue contents
+ * open "/sys/kernel/debug/slow_work/runqueue" to list queue contents
*/
static int slow_work_runqueue_open(struct inode *inode, struct file *file)
{
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/wait.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
#include "slow-work.h"
static void slow_work_cull_timeout(unsigned long);
static struct slow_work *slow_work_unreg_work_item;
static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq);
static DEFINE_MUTEX(slow_work_unreg_sync_lock);
+
+static void slow_work_set_thread_processing(int id, struct slow_work *work)
+{
+ if (work)
+ slow_work_thread_processing[id] = work->owner;
+}
+static void slow_work_done_thread_processing(int id, struct slow_work *work)
+{
+ struct module *module = slow_work_thread_processing[id];
+
+ slow_work_thread_processing[id] = NULL;
+ smp_mb();
+ if (slow_work_unreg_work_item == work ||
+ slow_work_unreg_module == module)
+ wake_up_all(&slow_work_unreg_wq);
+}
+static void slow_work_clear_thread_processing(int id)
+{
+ slow_work_thread_processing[id] = NULL;
+}
+#else
+static void slow_work_set_thread_processing(int id, struct slow_work *work) {}
+static void slow_work_done_thread_processing(int id, struct slow_work *work) {}
+static void slow_work_clear_thread_processing(int id) {}
#endif
/*
* Data for tracking currently executing items for indication through /proc
*/
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT];
pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT];
DEFINE_RWLOCK(slow_work_execs_lock);
*/
static noinline bool slow_work_execute(int id)
{
-#ifdef CONFIG_MODULES
- struct module *module;
-#endif
struct slow_work *work = NULL;
unsigned vsmax;
bool very_slow;
very_slow = false; /* avoid the compiler warning */
}
-#ifdef CONFIG_MODULES
- if (work)
- slow_work_thread_processing[id] = work->owner;
-#endif
+ slow_work_set_thread_processing(id, work);
if (work) {
slow_work_mark_time(work);
slow_work_begin_exec(id, work);
/* sort out the race between module unloading and put_ref() */
slow_work_put_ref(work);
-
-#ifdef CONFIG_MODULES
- module = slow_work_thread_processing[id];
- slow_work_thread_processing[id] = NULL;
- smp_mb();
- if (slow_work_unreg_work_item == work ||
- slow_work_unreg_module == module)
- wake_up_all(&slow_work_unreg_wq);
-#endif
+ slow_work_done_thread_processing(id, work);
return true;
else
list_add_tail(&work->link, &slow_work_queue);
spin_unlock_irq(&slow_work_queue_lock);
- slow_work_thread_processing[id] = NULL;
+ slow_work_clear_thread_processing(id);
return true;
}
static const struct slow_work_ops slow_work_new_thread_ops = {
.owner = THIS_MODULE,
.execute = slow_work_new_thread_execute,
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
.desc = slow_work_new_thread_desc,
#endif
};
*/
static void slow_work_wait_for_items(struct module *module)
{
+#ifdef CONFIG_MODULES
DECLARE_WAITQUEUE(myself, current);
struct slow_work *work;
int loop;
remove_wait_queue(&slow_work_unreg_wq, &myself);
mutex_unlock(&slow_work_unreg_sync_lock);
+#endif /* CONFIG_MODULES */
}
/**
if (slow_work_max_max_threads < nr_cpus * 2)
slow_work_max_max_threads = nr_cpus * 2;
#endif
-#ifdef CONFIG_SLOW_WORK_PROC
- proc_create("slow_work_rq", S_IFREG | 0400, NULL,
- &slow_work_runqueue_fops);
+#ifdef CONFIG_SLOW_WORK_DEBUG
+ {
+ struct dentry *dbdir;
+
+ dbdir = debugfs_create_dir("slow_work", NULL);
+ if (dbdir && !IS_ERR(dbdir))
+ debugfs_create_file("runqueue", S_IFREG | 0400, dbdir,
+ NULL, &slow_work_runqueue_fops);
+ }
#endif
return 0;
}
/*
* slow-work.c
*/
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
extern struct slow_work *slow_work_execs[];
extern pid_t slow_work_pids[];
extern rwlock_t slow_work_execs_lock;
extern spinlock_t slow_work_queue_lock;
/*
- * slow-work-proc.c
+ * slow-work-debugfs.c
*/
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
extern const struct file_operations slow_work_runqueue_fops;
extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- /* stop HW Rx aggregation. ampdu_action existence
- * already verified in session init so we add the BUG_ON */
- BUG_ON(!local->ops->ampdu_action);
-
rcu_read_lock();
sta = sta_info_get(local, ra);
ieee80211_tx_skb(sdata, skb, 0);
}
-static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
- enum ieee80211_back_parties initiator)
+int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+ enum ieee80211_back_parties initiator)
{
struct ieee80211_local *local = sta->local;
int ret;
u8 *state;
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
+ sta->sta.addr, tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
state = &sta->ampdu_mlme.tid_state_tx[tid];
if (*state == HT_AGG_STATE_OPERATIONAL)
/* HW shall not deny going back to legacy */
if (WARN_ON(ret)) {
- *state = HT_AGG_STATE_OPERATIONAL;
/*
* We may have pending packets get stuck in this case...
* Not bothering with a workaround for now.
goto unlock;
}
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
- sta->sta.addr, tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator);
unlock:
struct sta_info *sta;
int ret = 0;
- if (WARN_ON(!local->ops->ampdu_action))
+ if (!local->ops->ampdu_action)
return -EINVAL;
if (tid >= STA_TID_NUM)
struct sta_info *sta,
struct ieee80211_mgmt *mgmt, size_t len)
{
- struct ieee80211_local *local = sdata->local;
u16 tid, params;
u16 initiator;
WLAN_BACK_INITIATOR, 0);
else { /* WLAN_BACK_RECIPIENT */
spin_lock_bh(&sta->lock);
- sta->ampdu_mlme.tid_state_tx[tid] =
- HT_AGG_STATE_OPERATIONAL;
+ if (sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK)
+ ___ieee80211_stop_tx_ba_session(sta, tid,
+ WLAN_BACK_RECIPIENT);
spin_unlock_bh(&sta->lock);
- ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid,
- WLAN_BACK_RECIPIENT);
}
}
int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
enum ieee80211_back_parties initiator);
+int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+ enum ieee80211_back_parties initiator);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
Code Review / linux-2.6.git / commitdiff