these macros in include/asm-XXX/topology.h:
#define topology_physical_package_id(cpu)
#define topology_core_id(cpu)
-#define topology_thread_siblings(cpu)
-#define topology_core_siblings(cpu)
+#define topology_thread_cpumask(cpu)
+#define topology_core_cpumask(cpu)
The type of **_id is int.
-The type of siblings is cpumask_t.
+The type of siblings is (const) struct cpumask *.
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
1 = /dev/blockrom1 Second ROM card's translation layer interface
...
+260 char OSD (Object-based-device) SCSI Device
+ 0 = /dev/osd0 First OSD Device
+ 1 = /dev/osd1 Second OSD Device
+ ...
+ 255 = /dev/osd255 256th OSD Device
+
**** ADDITIONAL /dev DIRECTORY ENTRIES
This section details additional entries that should or may exist in
memtest= [KNL,X86] Enable memtest
Format: <integer>
- range: 0,4 : pattern number
default : 0 <disable>
+ Specifies the number of memtest passes to be
+ performed. Each pass selects another test
+ pattern from a given set of patterns. Memtest
+ fills the memory with this pattern, validates
+ memory contents and reserves bad memory
+ regions that are detected.
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
--- /dev/null
+The OSD Standard
+================
+OSD (Object-Based Storage Device) is a T10 SCSI command set that is designed
+to provide efficient operation of input/output logical units that manage the
+allocation, placement, and accessing of variable-size data-storage containers,
+called objects. Objects are intended to contain operating system and application
+constructs. Each object has associated attributes attached to it, which are
+integral part of the object and provide metadata about the object. The standard
+defines some common obligatory attributes, but user attributes can be added as
+needed.
+
+See: http://www.t10.org/ftp/t10/drafts/osd2/ for the latest draft for OSD 2
+or search the web for "OSD SCSI"
+
+OSD in the Linux Kernel
+=======================
+osd-initiator:
+ The main component of OSD in Kernel is the osd-initiator library. Its main
+user is intended to be the pNFS-over-objects layout driver, which uses objects
+as its back-end data storage. Other clients are the other osd parts listed below.
+
+osd-uld:
+ This is a SCSI ULD that registers for OSD type devices and provides a testing
+platform, both for the in-kernel initiator as well as connected targets. It
+currently has no useful user-mode API, though it could have if need be.
+
+exofs:
+ Is an OSD based Linux file system. It uses the osd-initiator and osd-uld,
+to export a usable file system for users.
+See Documentation/filesystems/exofs.txt for more details
+
+osd target:
+ There are no current plans for an OSD target implementation in kernel. For all
+needs, a user-mode target that is based on the scsi tgt target framework is
+available from Ohio Supercomputer Center (OSC) at:
+http://www.open-osd.org/bin/view/Main/OscOsdProject
+There are several other target implementations. See http://open-osd.org for more
+links.
+
+Files and Folders
+=================
+This is the complete list of files included in this work:
+include/scsi/
+ osd_initiator.h Main API for the initiator library
+ osd_types.h Common OSD types
+ osd_sec.h Security Manager API
+ osd_protocol.h Wire definitions of the OSD standard protocol
+ osd_attributes.h Wire definitions of OSD attributes
+
+drivers/scsi/osd/
+ osd_initiator.c OSD-Initiator library implementation
+ osd_uld.c The OSD scsi ULD
+ osd_ktest.{h,c} In-kernel test suite (called by osd_uld)
+ osd_debug.h Some printk macros
+ Makefile For both in-tree and out-of-tree compilation
+ Kconfig Enables inclusion of the different pieces
+ osd_test.c User-mode application to call the kernel tests
+
+The OSD-Initiator Library
+=========================
+osd_initiator is a low level implementation of an osd initiator encoder.
+But even though, it should be intuitive and easy to use. Perhaps over time an
+higher lever will form that automates some of the more common recipes.
+
+init/fini:
+- osd_dev_init() associates a scsi_device with an osd_dev structure
+ and initializes some global pools. This should be done once per scsi_device
+ (OSD LUN). The osd_dev structure is needed for calling osd_start_request().
+
+- osd_dev_fini() cleans up before a osd_dev/scsi_device destruction.
+
+OSD commands encoding, execution, and decoding of results:
+
+struct osd_request's is used to iteratively encode an OSD command and carry
+its state throughout execution. Each request goes through these stages:
+
+a. osd_start_request() allocates the request.
+
+b. Any of the osd_req_* methods is used to encode a request of the specified
+ type.
+
+c. osd_req_add_{get,set}_attr_* may be called to add get/set attributes to the
+ CDB. "List" or "Page" mode can be used exclusively. The attribute-list API
+ can be called multiple times on the same request. However, only one
+ attribute-page can be read, as mandated by the OSD standard.
+
+d. osd_finalize_request() computes offsets into the data-in and data-out buffers
+ and signs the request using the provided capability key and integrity-
+ check parameters.
+
+e. osd_execute_request() may be called to execute the request via the block
+ layer and wait for its completion. The request can be executed
+ asynchronously by calling the block layer API directly.
+
+f. After execution, osd_req_decode_sense() can be called to decode the request's
+ sense information.
+
+g. osd_req_decode_get_attr() may be called to retrieve osd_add_get_attr_list()
+ values.
+
+h. osd_end_request() must be called to deallocate the request and any resource
+ associated with it. Note that osd_end_request cleans up the request at any
+ stage and it must always be called after a successful osd_start_request().
+
+osd_request's structure:
+
+The OSD standard defines a complex structure of IO segments pointed to by
+members in the CDB. Up to 3 segments can be deployed in the IN-Buffer and up to
+4 in the OUT-Buffer. The ASCII illustration below depicts a secure-read with
+associated get+set of attributes-lists. Other combinations very on the same
+basic theme. From no-segments-used up to all-segments-used.
+
+|________OSD-CDB__________|
+| |
+|read_len (offset=0) -|---------\
+| | |
+|get_attrs_list_length | |
+|get_attrs_list_offset -|----\ |
+| | | |
+|retrieved_attrs_alloc_len| | |
+|retrieved_attrs_offset -|----|----|-\
+| | | | |
+|set_attrs_list_length | | | |
+|set_attrs_list_offset -|-\ | | |
+| | | | | |
+|in_data_integ_offset -|-|--|----|-|-\
+|out_data_integ_offset -|-|--|--\ | | |
+\_________________________/ | | | | | |
+ | | | | | |
+|_______OUT-BUFFER________| | | | | | |
+| Set attr list |</ | | | | |
+| | | | | | |
+|-------------------------| | | | | |
+| Get attr descriptors |<---/ | | | |
+| | | | | |
+|-------------------------| | | | |
+| Out-data integrity |<------/ | | |
+| | | | |
+\_________________________/ | | |
+ | | |
+|________IN-BUFFER________| | | |
+| In-Data read |<--------/ | |
+| | | |
+|-------------------------| | |
+| Get attr list |<----------/ |
+| | |
+|-------------------------| |
+| In-data integrity |<------------/
+| |
+\_________________________/
+
+A block device request can carry bidirectional payload by means of associating
+a bidi_read request with a main write-request. Each in/out request is described
+by a chain of BIOs associated with each request.
+The CDB is of a SCSI VARLEN CDB format, as described by OSD standard.
+The OSD standard also mandates alignment restrictions at start of each segment.
+
+In the code, in struct osd_request, there are two _osd_io_info structures to
+describe the IN/OUT buffers above, two BIOs for the data payload and up to five
+_osd_req_data_segment structures to hold the different segments allocation and
+information.
+
+Important: We have chosen to disregard the assumption that a BIO-chain (and
+the resulting sg-list) describes a linear memory buffer. Meaning only first and
+last scatter chain can be incomplete and all the middle chains are of PAGE_SIZE.
+For us, a scatter-gather-list, as its name implies and as used by the Networking
+layer, is to describe a vector of buffers that will be transferred to/from the
+wire. It works very well with current iSCSI transport. iSCSI is currently the
+only deployed OSD transport. In the future we anticipate SAS and FC attached OSD
+devices as well.
+
+The OSD Testing ULD
+===================
+TODO: More user-mode control on tests.
+
+Authors, Mailing list
+=====================
+Please communicate with us on any deployment of osd, whether using this code
+or not.
+
+Any problems, questions, bug reports, lonely OSD nights, please email:
+ OSD Dev List <osd-dev@open-osd.org>
+
+More up-to-date information can be found on:
+http://open-osd.org
+
+Boaz Harrosh <bharrosh@panasas.com>
+Benny Halevy <bhalevy@panasas.com>
+
+References
+==========
+Weber, R., "SCSI Object-Based Storage Device Commands",
+T10/1355-D ANSI/INCITS 400-2004,
+http://www.t10.org/ftp/t10/drafts/osd/osd-r10.pdf
+
+Weber, R., "SCSI Object-Based Storage Device Commands -2 (OSD-2)"
+T10/1729-D, Working Draft, rev. 3
+http://www.t10.org/ftp/t10/drafts/osd2/osd2r03.pdf
0202/4 2.00+ header Magic signature "HdrS"
0206/2 2.00+ version Boot protocol version supported
0208/4 2.00+ realmode_swtch Boot loader hook (see below)
-020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete)
+020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete)
020E/2 2.00+ kernel_version Pointer to kernel version string
0210/1 2.00+ type_of_loader Boot loader identifier
0211/1 2.00+ loadflags Boot protocol option flags
0224/2 2.01+ heap_end_ptr Free memory after setup end
0226/2 N/A pad1 Unused
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
-022C/4 2.03+ initrd_addr_max Highest legal initrd address
+022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
-0235/3 N/A pad2 Unused
+0235/1 N/A pad2 Unused
+0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
-Field name: readmode_swtch
+Field name: realmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
Protocol: 2.00+
Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
-Field name: start_sys
+Field name: start_sys_seg
Type: read
Offset/size: 0x20c/2
Protocol: 2.00+
zero, the kernel will assume that your boot loader does not support
the 2.02+ protocol.
-Field name: initrd_addr_max
+Field name: ramdisk_max
Type: read
Offset/size: 0x22c/4
Protocol: 2.03+
The payload may be compressed. The format of both the compressed and
uncompressed data should be determined using the standard magic
- numbers. Currently only gzip compressed ELF is used.
+ numbers. The currently supported compression formats are gzip
+ (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA
+ (magic number 5D 00). The uncompressed payload is currently always ELF
+ (magic number 7F 45 4C 46).
Field name: payload_length
Type: read
W: http://www.nongnu.org/orinoco/
S: Maintained
+OSD LIBRARY
+P: Boaz Harrosh
+M: bharrosh@panasas.com
+P: Benny Halevy
+M: bhalevy@panasas.com
+L: osd-dev@open-osd.org
+W: http://open-osd.org
+T: git://git.open-osd.org/open-osd.git
+S: Maintained
+
P54 WIRELESS DRIVER
P: Michael Wu
M: flamingice@sourmilk.net
endif
# Force gcc to behave correct even for buggy distributions
-# Arch Makefiles may override this setting
+ifndef CONFIG_CC_STACKPROTECTOR
KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu));
return 0;
}
if (alpha_using_srm) {
static struct vm_struct console_remap_vm;
- unsigned long vaddr = VMALLOC_START;
+ unsigned long nr_pages = 0;
+ unsigned long vaddr;
unsigned long i, j;
+ /* calculate needed size */
+ for (i = 0; i < crb->map_entries; ++i)
+ nr_pages += crb->map[i].count;
+
+ /* register the vm area */
+ console_remap_vm.flags = VM_ALLOC;
+ console_remap_vm.size = nr_pages << PAGE_SHIFT;
+ vm_area_register_early(&console_remap_vm, PAGE_SIZE);
+
+ vaddr = (unsigned long)console_remap_vm.addr;
+
/* Set up the third level PTEs and update the virtual
addresses of the CRB entries. */
for (i = 0; i < crb->map_entries; ++i) {
vaddr += PAGE_SIZE;
}
}
-
- /* Let vmalloc know that we've allocated some space. */
- console_remap_vm.flags = VM_ALLOC;
- console_remap_vm.addr = (void *) VMALLOC_START;
- console_remap_vm.size = vaddr - VMALLOC_START;
- vmlist = &console_remap_vm;
}
callback_init_done = 1;
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* We are not allocating bad_irq_desc.affinity or .pending_mask */
+#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
+#endif
+
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
#ifdef CONFIG_SMP
- bad_irq_desc.affinity = CPU_MASK_ALL;
+ cpumask_setall(bad_irq_desc.affinity);
bad_irq_desc.cpu = smp_processor_id();
#endif
init_arch_irq();
struct irq_desc *desc = irq_desc + i;
if (desc->cpu == cpu) {
- unsigned int newcpu = any_online_cpu(desc->affinity);
-
- if (newcpu == NR_CPUS) {
+ unsigned int newcpu = cpumask_any_and(desc->affinity,
+ cpu_online_mask);
+ if (newcpu >= nr_cpu_ids) {
if (printk_ratelimit())
printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
i, cpu);
- cpus_setall(desc->affinity);
- newcpu = any_online_cpu(desc->affinity);
+ cpumask_setall(desc->affinity);
+ newcpu = cpumask_any_and(desc->affinity,
+ cpu_online_mask);
}
route_irq(desc, i, newcpu);
__initramfs_end = .;
#endif
. = ALIGN(4096);
+ __per_cpu_load = .;
__per_cpu_start = .;
+ *(.data.percpu.page_aligned)
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
const struct cpumask *mask = cpumask_of(cpu);
spin_lock_irq(&desc->lock);
- desc->affinity = *mask;
+ cpumask_copy(desc->affinity, mask);
desc->chip->set_affinity(irq, mask);
spin_unlock_irq(&desc->lock);
}
config QUICKLIST
def_bool y
-config HAVE_ARCH_BOOTMEM_NODE
+config HAVE_ARCH_BOOTMEM
def_bool n
config ARCH_HAVE_MEMORY_PRESENT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Feb 20 10:01:44 2009
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
+CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BLACKFIN_AD1836 is not set
-# CONFIG_SND_BFIN_AD73322 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_BF5XX_I2S=m
-CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
+# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_MUSB_SOC=y
#
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_USB_MUSB_SOC=y
#
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=3
CONFIG_BF_REV_MAX=6
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_BFIN532_IP0X is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=3
CONFIG_BF_REV_MAX=6
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_BFIN532_IP0X is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
#
# BF533/2/1 Specific Configuration
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
+# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Dec 30 17:24:37 2008
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=2
CONFIG_BF_REV_MAX=3
# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
# CONFIG_PNAV10 is not set
# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+CONFIG_BF5xx_PPI=m
CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
+# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_BF538=y
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=4
CONFIG_BF_REV_MAX=5
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=y
-CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
+CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
CONFIG_BF548=y
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
+CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
#
CONFIG_IRTTY_SIR=m
CONFIG_BFIN_SIR=m
-CONFIG_BFIN_SIR3=y
# CONFIG_BFIN_SIR0 is not set
# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
CONFIG_SIR_BFIN_DMA=y
# CONFIG_SIR_BFIN_PIO is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
#
# USB Network Adapters
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_USB_MUSB_SOC=y
#
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
-CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN=y
# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
CONFIG_BF561=y
# CONFIG_SMP is not set
CONFIG_BF_REV_MIN=3
CONFIG_BFIN561_EZKIT=y
# CONFIG_BFIN561_TEPLA is not set
# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_GENERIC_BF561_BOARD is not set
#
# BF561 Specific Configuration
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=2
CONFIG_BF_REV_MAX=3
# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
CONFIG_PNAV10=y
# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
struct bfin5xx_spi_master {
u16 num_chipselect;
u8 enable_dma;
- u16 pin_req[4];
+ u16 pin_req[7];
};
/* spi_board_info.controller_data for SPI slave devices,
#ifndef __BFIN_SPORT_H__
#define __BFIN_SPORT_H__
+#ifdef __KERNEL__
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#endif
+
#define SPORT_MAJOR 237
#define SPORT_NR_DEVS 2
int tx_len;
int tx_sent;
- int sport_err_irq;
+ int err_irq;
struct mutex mutex; /* mutual exclusion semaphore */
struct task_struct *task;
* MODIFICATION HISTORY :
**************************************************************/
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
void set_gpio_dir(unsigned, unsigned short);
void set_gpio_inen(unsigned, unsigned short);
void set_gpio_polar(unsigned, unsigned short);
static inline int gpio_to_irq(unsigned gpio)
{
- return (gpio + GPIO_IRQ_BASE);
+ if (likely(gpio < MAX_BLACKFIN_GPIOS))
+ return gpio + GPIO_IRQ_BASE;
+
+ return -EINVAL;
}
static inline int irq_to_gpio(unsigned irq)
#include <asm/blackfin.h>
/*
- * BF537/BF527: 8 timers:
+ * BF51x/BF52x/BF537: 8 timers:
*/
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || defined(BF537_FAMILY)
# define MAX_BLACKFIN_GPTIMERS 8
# define TIMER0_GROUP_REG TIMER_ENABLE
#endif
/*
* BF54x: 11 timers (BF542: 8 timers):
*/
-#if defined(BF548_FAMILY)
+#if defined(CONFIG_BF54x)
# ifdef CONFIG_BF542
# define MAX_BLACKFIN_GPTIMERS 8
# else
#include <asm-generic/percpu.h>
-#ifdef CONFIG_MODULES
-#define PERCPU_MODULE_RESERVE 8192
-#else
-#define PERCPU_MODULE_RESERVE 0
-#endif
-
-#define PERCPU_ENOUGH_ROOM \
- (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
- PERCPU_MODULE_RESERVE)
-
#endif /* __ARCH_BLACKFIN_PERCPU__ */
static struct gpio_port_t * const gpio_array[] = {
#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
(struct gpio_port_t *) FIO_FLAG_D,
-#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
(struct gpio_port_t *) PORTFIO,
(struct gpio_port_t *) PORTGIO,
(struct gpio_port_t *) PORTHIO,
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
#endif
};
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
static unsigned short * const port_fer[] = {
(unsigned short *) PORTF_FER,
(unsigned short *) PORTG_FER,
static const
u8 pmux_offset[][16] = {
-# if defined(BF527_FAMILY)
+# if defined(CONFIG_BF52x)
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
-# elif defined(BF518_FAMILY)
+# elif defined(CONFIG_BF51x)
{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
inline int check_gpio(unsigned gpio)
{
-#if defined(BF548_FAMILY)
+#if defined(CONFIG_BF54x)
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
if (check_gpio(gpio))
return;
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
if (usage == GPIO_USAGE)
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
else
}
}
}
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
inline void portmux_setup(unsigned short per)
{
u32 pmux;
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
-#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
inline void portmux_setup(unsigned short per)
{
u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
arch_initcall(bfin_gpio_init);
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
#elif defined(BF538_FAMILY)
IRQ_PORTF_INTB
-#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
#elif defined(BF561_FAMILY)
IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
gpio_array[bank]->maskb = 0;
if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
bank = gpio_bank(i);
if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].fer = *port_fer[bank];
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].mux = *port_mux[bank];
#else
if (bank == 0)
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
*port_mux[bank] = gpio_bank_saved[bank].mux;
#else
if (bank == 0)
#endif
-#else /* BF548_FAMILY */
+#else /* CONFIG_BF54x */
#ifdef CONFIG_PM
u32 bfin_pm_standby_setup(void)
}
EXPORT_SYMBOL(get_gpio_dir);
-#endif /* BF548_FAMILY */
+#endif /* CONFIG_BF54x */
/***********************************************************
*
*/
if (unlikely(!check_gpio(ident) &&
reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR
"%s: Peripheral %d is already reserved as GPIO by %s !\n",
__func__, ident, get_label(ident));
* be requested and used by several drivers
*/
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) {
if (cmp_label(ident, label) == 0)
goto anyway;
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR
"%s: Peripheral %d function %d is already reserved by %s !\n",
__func__, ident, P_FUNCT2MUX(per), get_label(ident));
}
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
gpio, get_label(gpio));
local_irq_restore_hw(flags);
return -EBUSY;
}
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
}
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0);
}
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
gpio_error(gpio);
local_irq_restore_hw(flags);
return;
local_irq_save_hw(flags);
if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
gpio);
return -EBUSY;
}
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
printk(KERN_ERR
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
- dump_stack();
+ if (system_state == SYSTEM_BOOTING)
+ dump_stack();
gpio_error(gpio);
local_irq_restore_hw(flags);
return;
static inline void __bfin_gpio_direction_input(unsigned gpio)
{
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
void bfin_gpio_irq_prepare(unsigned gpio)
{
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
unsigned long flags;
#endif
port_setup(gpio, GPIO_USAGE);
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
local_irq_save_hw(flags);
__bfin_gpio_direction_input(gpio);
local_irq_restore_hw(flags);
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value);
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
int bfin_gpio_get_value(unsigned gpio)
{
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
#else
unsigned long flags;
#endif
};
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* We are not allocating a variable-sized bad_irq_desc.affinity */
+#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
+#endif
+
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
. = ALIGN(4);
__etext_l1 = .;
}
+ ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")
.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
{
. = ALIGN(4);
__ebss_l1 = .;
}
+ ASSERT (SIZEOF(.data_a_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
{
. = ALIGN(4);
__ebss_b_l1 = .;
}
+ ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")
__l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
. = ALIGN(4);
__ebss_l2 = .;
}
+ ASSERT (SIZEOF(.text_data_l1) <= L2_LENGTH, "L2 overflow!")
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
-#define BF518_FAMILY
-
#include "bf518.h"
#include "mem_map.h"
#include "defBF512.h"
/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
+/* Removable Storage Interface Registers */
+
+#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
+#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
+#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
+#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
+#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
+#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
+#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
+#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
+#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
+#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
+#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
+#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
+
#endif /* _CDEF_BF514_H */
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
+/* Removable Storage Interface Registers */
+
+#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
+#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
+#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
+#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
+#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
+#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
+#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
+#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
+#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
+#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
+#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
+#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
+
#endif /* _CDEF_BF516_H */
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+/* ********************************************************** */
+/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
+/* and MULTI BIT READ MACROS */
+/* ********************************************************** */
+
+/* Bit masks for SDH_COMMAND */
+
+#define CMD_IDX 0x3f /* Command Index */
+#define CMD_RSP 0x40 /* Response */
+#define CMD_L_RSP 0x80 /* Long Response */
+#define CMD_INT_E 0x100 /* Command Interrupt */
+#define CMD_PEND_E 0x200 /* Command Pending */
+#define CMD_E 0x400 /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define PWR_ON 0x3 /* Power On */
+#if 0
+#define TBD 0x3c /* TBD */
+#endif
+#define SD_CMD_OD 0x40 /* Open Drain Output */
+#define ROD_CTL 0x80 /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define CLKDIV 0xff /* MC_CLK Divisor */
+#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E 0x200 /* Power Save Enable */
+#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
+#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define RESP_CMD 0x3f /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define DTX_E 0x1 /* Data Transfer Enable */
+#define DTX_DIR 0x2 /* Data Transfer Direction */
+#define DTX_MODE 0x4 /* Data Transfer Mode */
+#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
+#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
+#define CMD_TIME_OUT 0x4 /* CMD Time Out */
+#define DAT_TIME_OUT 0x8 /* Data Time Out */
+#define TX_UNDERRUN 0x10 /* Transmit Underrun */
+#define RX_OVERRUN 0x20 /* Receive Overrun */
+#define CMD_RESP_END 0x40 /* CMD Response End */
+#define CMD_SENT 0x80 /* CMD Sent */
+#define DAT_END 0x100 /* Data End */
+#define START_BIT_ERR 0x200 /* Start Bit Error */
+#define DAT_BLK_END 0x400 /* Data Block End */
+#define CMD_ACT 0x800 /* CMD Active */
+#define TX_ACT 0x1000 /* Transmit Active */
+#define RX_ACT 0x2000 /* Receive Active */
+#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
+#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
+#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
+#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
+#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
+#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
+#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
+#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
+#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
+#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
+#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
+#define DAT_END_STAT 0x100 /* Data End Status */
+#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
+#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
+#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
+#define DAT_END_MASK 0x100 /* Data End Mask */
+#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
+#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
+#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
+#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define FIFO_COUNT 0x7fff /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
+#define SD_CARD_DET 0x10 /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
+#define SCD_MSK 0x40 /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define CLKS_EN 0x1 /* Clocks Enable */
+#define SD4E 0x4 /* SDIO 4-Bit Enable */
+#define MWE 0x8 /* Moving Window Enable */
+#define SD_RST 0x10 /* SDMMC Reset */
+#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
+#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
+#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define RWR 0x1 /* Read Wait Request */
+
#endif /* _DEF_BF514_H */
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+/* ********************************************************** */
+/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
+/* and MULTI BIT READ MACROS */
+/* ********************************************************** */
+
+/* Bit masks for SDH_COMMAND */
+
+#define CMD_IDX 0x3f /* Command Index */
+#define CMD_RSP 0x40 /* Response */
+#define CMD_L_RSP 0x80 /* Long Response */
+#define CMD_INT_E 0x100 /* Command Interrupt */
+#define CMD_PEND_E 0x200 /* Command Pending */
+#define CMD_E 0x400 /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define PWR_ON 0x3 /* Power On */
+#if 0
+#define TBD 0x3c /* TBD */
+#endif
+#define SD_CMD_OD 0x40 /* Open Drain Output */
+#define ROD_CTL 0x80 /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define CLKDIV 0xff /* MC_CLK Divisor */
+#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E 0x200 /* Power Save Enable */
+#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
+#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define RESP_CMD 0x3f /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define DTX_E 0x1 /* Data Transfer Enable */
+#define DTX_DIR 0x2 /* Data Transfer Direction */
+#define DTX_MODE 0x4 /* Data Transfer Mode */
+#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
+#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
+#define CMD_TIME_OUT 0x4 /* CMD Time Out */
+#define DAT_TIME_OUT 0x8 /* Data Time Out */
+#define TX_UNDERRUN 0x10 /* Transmit Underrun */
+#define RX_OVERRUN 0x20 /* Receive Overrun */
+#define CMD_RESP_END 0x40 /* CMD Response End */
+#define CMD_SENT 0x80 /* CMD Sent */
+#define DAT_END 0x100 /* Data End */
+#define START_BIT_ERR 0x200 /* Start Bit Error */
+#define DAT_BLK_END 0x400 /* Data Block End */
+#define CMD_ACT 0x800 /* CMD Active */
+#define TX_ACT 0x1000 /* Transmit Active */
+#define RX_ACT 0x2000 /* Receive Active */
+#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
+#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
+#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
+#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
+#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
+#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
+#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
+#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
+#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
+#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
+#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
+#define DAT_END_STAT 0x100 /* Data End Status */
+#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
+#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
+#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
+#define DAT_END_MASK 0x100 /* Data End Mask */
+#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
+#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
+#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
+#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define FIFO_COUNT 0x7fff /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
+#define SD_CARD_DET 0x10 /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
+#define SCD_MSK 0x40 /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define CLKS_EN 0x1 /* Clocks Enable */
+#define SD4E 0x4 /* SDIO 4-Bit Enable */
+#define MWE 0x8 /* Moving Window Enable */
+#define SD_RST 0x10 /* SDMMC Reset */
+#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
+#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
+#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define RWR 0x1 /* Read Wait Request */
+
#endif /* _DEF_BF516_H */
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
-#define BF527_FAMILY
-
#include "bf527.h"
#include "mem_map.h"
#include "defBF522.h"
};
#endif /* spi master and devices */
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+ .num_chipselect = 1, /* master only supports one device */
+ .enable_dma = 0, /* master don't support DMA */
+ .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+ P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+ [0] = {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_TCR1 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+ .name = "bfin-sport-spi",
+ .id = 1, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+ .resource = bfin_sport_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+ },
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+ .num_chipselect = 1, /* master only supports one device */
+ .enable_dma = 0, /* master don't support DMA */
+ .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+ [0] = {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_TCR1 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+ .name = "bfin-sport-spi",
+ .id = 2, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+ .resource = bfin_sport_spi1_resource,
+ .dev = {
+ .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+ },
+};
+
+#endif /* sport spi master and devices */
+
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
};
#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+ /*
+ * ADP5520/5501 Backlight Data
+ */
+
+static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
+ .fade_in = FADE_T_1200ms,
+ .fade_out = FADE_T_1200ms,
+ .fade_led_law = BL_LAW_LINEAR,
+ .en_ambl_sens = 1,
+ .abml_filt = BL_AMBL_FILT_640ms,
+ .l1_daylight_max = BL_CUR_mA(15),
+ .l1_daylight_dim = BL_CUR_mA(0),
+ .l2_office_max = BL_CUR_mA(7),
+ .l2_office_dim = BL_CUR_mA(0),
+ .l3_dark_max = BL_CUR_mA(3),
+ .l3_dark_dim = BL_CUR_mA(0),
+ .l2_trip = L2_COMP_CURR_uA(700),
+ .l2_hyst = L2_COMP_CURR_uA(50),
+ .l3_trip = L3_COMP_CURR_uA(80),
+ .l3_hyst = L3_COMP_CURR_uA(20),
+};
+
+ /*
+ * ADP5520/5501 LEDs Data
+ */
+
+#include <linux/leds.h>
+
+static struct led_info adp5520_leds[] = {
+ {
+ .name = "adp5520-led1",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+ },
+#ifdef ADP5520_EN_ALL_LEDS
+ {
+ .name = "adp5520-led2",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
+ },
+ {
+ .name = "adp5520-led3",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
+ },
+#endif
+};
+
+static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+ .num_leds = ARRAY_SIZE(adp5520_leds),
+ .leds = adp5520_leds,
+ .fade_in = FADE_T_600ms,
+ .fade_out = FADE_T_600ms,
+ .led_on_time = LED_ONT_600ms,
+};
+
+ /*
+ * ADP5520 GPIO Data
+ */
+
+static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+ .gpio_start = 50,
+ .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+ .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+};
+
+ /*
+ * ADP5520 Keypad Data
+ */
+
+#include <linux/input.h>
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+ [KEY(0, 0)] = KEY_GRAVE,
+ [KEY(0, 1)] = KEY_1,
+ [KEY(0, 2)] = KEY_2,
+ [KEY(0, 3)] = KEY_3,
+ [KEY(1, 0)] = KEY_4,
+ [KEY(1, 1)] = KEY_5,
+ [KEY(1, 2)] = KEY_6,
+ [KEY(1, 3)] = KEY_7,
+ [KEY(2, 0)] = KEY_8,
+ [KEY(2, 1)] = KEY_9,
+ [KEY(2, 2)] = KEY_0,
+ [KEY(2, 3)] = KEY_MINUS,
+ [KEY(3, 0)] = KEY_EQUAL,
+ [KEY(3, 1)] = KEY_BACKSLASH,
+ [KEY(3, 2)] = KEY_BACKSPACE,
+ [KEY(3, 3)] = KEY_ENTER,
+};
+
+static struct adp5520_keys_platfrom_data adp5520_keys_data = {
+ .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
+ .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0,
+ .keymap = adp5520_keymap,
+ .keymapsize = ARRAY_SIZE(adp5520_keymap),
+ .repeat = 0,
+};
+
+ /*
+ * ADP5520/5501 Multifuction Device Init Data
+ */
+
+static struct adp5520_subdev_info adp5520_subdevs[] = {
+ {
+ .name = "adp5520-backlight",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_backlight_data,
+ },
+ {
+ .name = "adp5520-led",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_leds_data,
+ },
+ {
+ .name = "adp5520-gpio",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_gpio_data,
+ },
+ {
+ .name = "adp5520-keys",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_keys_data,
+ },
+};
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+ .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
+ .subdevs = adp5520_subdevs,
+};
+
+#endif
+
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
.platform_data = (void *)&adp5588_kpad_data,
},
#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+ {
+ I2C_BOARD_INFO("pmic-adp5520", 0x32),
+ .irq = IRQ_PF7,
+ .platform_data = (void *)&adp5520_pdev_data,
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT IRQ_PF5
+#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
+#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+#define PATA_INT IRQ_PF5
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 1,
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
.flags = IORESOURCE_IRQ,
},
};
+#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 0,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20211820,
+ .end = 0x2021183F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2021181C,
+ .end = 0x2021181F,
+ .flags = IORESOURCE_MEM,
+ },
+};
+#endif
static struct platform_device bfin_pata_device = {
.name = "pata_platform",
&bfin_spi0_device,
#endif
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+ &bfin_sport_spi0_device,
+ &bfin_sport_spi1_device,
+#endif
+
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
#ifndef _MACH_BLACKFIN_H_
#define _MACH_BLACKFIN_H_
-#define BF548_FAMILY
-
#include "bf548.h"
#include "mem_map.h"
#include "anomaly.h"
static int bfin_pm_valid(suspend_state_t state)
{
return (state == PM_SUSPEND_STANDBY
-#ifndef BF533_FAMILY
+#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
/*
* On BF533/2/1:
* If we enter Hibernate the SCKE Pin is driven Low,
#else /* ! SMP */
-#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu")))
-
#define per_cpu_init() (__phys_per_cpu_start)
#endif /* SMP */
+#define PER_CPU_BASE_SECTION ".data.percpu"
+
/*
* Be extremely careful when taking the address of this variable! Due to virtual
* remapping, it is different from the canonical address returned by __get_cpu_var(var)!
Code Review / linux-2.6.git / commitdiff