* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM / Hibernate: Fix preallocating of memory
PM / Hibernate: Remove swsusp.c finally
PM / Hibernate: Remove trailing space in message
PM: Allow SCSI devices to suspend/resume asynchronously
PM: Allow USB devices to suspend/resume asynchronously
USB: implement non-tree resume ordering constraints for PCI host controllers
PM: Allow PCI devices to suspend/resume asynchronously
PM / Hibernate: Swap, remove useless check from swsusp_read()
PM / Hibernate: Really deprecate deprecated user ioctls
PM: Allow device drivers to use dpm_wait()
PM: Start asynchronous resume threads upfront
PM: Add facility for advanced testing of async suspend/resume
PM: Add a switch for disabling/enabling asynchronous suspend/resume
PM: Asynchronous suspend and resume of devices
PM: Add parent information to timing messages
PM: Document device power attributes in sysfs
PM / Runtime: Add sysfs switch for disabling device run-time PM
<entry></entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry>
+<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+should set this to 0.</entry>
</row>
</tbody>
</tgroup>
driver's incoming queue. The semantics depend on the selected I/O
method.</para>
- <para>To enqueue a <link linkend="mmap">memory mapped</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_MMAP</constant> and the
+ <para>To enqueue a buffer applications set the <structfield>type</structfield>
+field of a &v4l2-buffer; to the same buffer type as was previously used
+with &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
+<structfield>type</structfield>. Applications must also set the
<structfield>index</structfield> field. Valid index numbers range from
zero to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The
<constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also
initialize the <structfield>bytesused</structfield>,
<structfield>field</structfield> and
-<structfield>timestamp</structfield> fields. See <xref
- linkend="buffer" /> for details. When
+<structfield>timestamp</structfield> fields, see <xref
+linkend="buffer" /> for details.
+Applications must also set <structfield>flags</structfield> to 0. If a driver
+supports capturing from specific video inputs and you want to specify a video
+input, then <structfield>flags</structfield> should be set to
+<constant>V4L2_BUF_FLAG_INPUT</constant> and the field
+<structfield>input</structfield> must be initialized to the desired input.
+The <structfield>reserved</structfield> field must be set to 0.
+</para>
+
+ <para>To enqueue a <link linkend="mmap">memory mapped</link>
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_MMAP</constant>. When
<constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the
<constant>V4L2_BUF_FLAG_MAPPED</constant> and
&EINVAL;.</para>
<para>To enqueue a <link linkend="userp">user pointer</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_USERPTR</constant> and the
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_USERPTR</constant>, the
<structfield>m.userptr</structfield> field to the address of the
-buffer and <structfield>length</structfield> to its size. When the
-buffer is intended for output additional fields must be set as above.
+buffer and <structfield>length</structfield> to its size.
When <constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant>
flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
<structfield>flags</structfield> field, or it returns an error code.
This ioctl locks the memory pages of the buffer in physical memory,
they cannot be swapped out to disk. Buffers remain locked until
-dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are
+dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
called, or until the device is closed.</para>
<para>Applications call the <constant>VIDIOC_DQBUF</constant>
ioctl to dequeue a filled (capturing) or displayed (output) buffer
from the driver's outgoing queue. They just set the
-<structfield>type</structfield> and <structfield>memory</structfield>
+<structfield>type</structfield>, <structfield>memory</structfield>
+and <structfield>reserved</structfield>
fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant>
is called with a pointer to this structure the driver fills the
remaining fields or returns an error code.</para>
&VIDIOC-REQBUFS; ioctl.</para>
<para>Applications set the <structfield>type</structfield> field
- of a &v4l2-buffer; to the same buffer type as previously
+ of a &v4l2-buffer; to the same buffer type as was previously used with
&v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, and the <structfield>index</structfield>
field. Valid index numbers range from zero
to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one.
+The <structfield>reserved</structfield> field should to set to 0.
After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to
this structure drivers return an error code or fill the rest of
the structure.</para>
<constant>V4L2_BUF_FLAG_MAPPED</constant>,
<constant>V4L2_BUF_FLAG_QUEUED</constant> and
<constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The
-<structfield>memory</structfield> field will be set to
-<constant>V4L2_MEMORY_MMAP</constant>, the <structfield>m.offset</structfield>
+<structfield>memory</structfield> field will be set to the current
+I/O method, the <structfield>m.offset</structfield>
contains the offset of the buffer from the start of the device memory,
the <structfield>length</structfield> field its size. The driver may
or may not set the remaining fields and flags, they are meaningless in
allocated with this ioctl before they can be mapped into the
application's address space. User buffers are allocated by
applications themselves, and this ioctl is merely used to switch the
-driver into user pointer I/O mode.</para>
+driver into user pointer I/O mode and to setup some internal structures.</para>
- <para>To allocate device buffers applications initialize three
-fields of a <structname>v4l2_requestbuffers</structname> structure.
+ <para>To allocate device buffers applications initialize all
+fields of the <structname>v4l2_requestbuffers</structname> structure.
They set the <structfield>type</structfield> field to the respective
stream or buffer type, the <structfield>count</structfield> field to
-the desired number of buffers, and <structfield>memory</structfield>
-must be set to <constant>V4L2_MEMORY_MMAP</constant>. When the ioctl
-is called with a pointer to this structure the driver attempts to
-allocate the requested number of buffers and stores the actual number
+the desired number of buffers, <structfield>memory</structfield>
+must be set to the requested I/O method and the reserved array
+must be zeroed. When the ioctl
+is called with a pointer to this structure the driver will attempt to allocate
+the requested number of buffers and it stores the actual number
allocated in the <structfield>count</structfield> field. It can be
smaller than the number requested, even zero, when the driver runs out
-of free memory. A larger number is possible when the driver requires
-more buffers to function correctly.<footnote>
- <para>For example video output requires at least two buffers,
+of free memory. A larger number is also possible when the driver requires
+more buffers to function correctly. For example video output requires at least two buffers,
one displayed and one filled by the application.</para>
- </footnote> When memory mapping I/O is not supported the ioctl
+ <para>When the I/O method is not supported the ioctl
returns an &EINVAL;.</para>
<para>Applications can call <constant>VIDIOC_REQBUFS</constant>
reason why munmap()ping one or even all buffers must imply
streamoff.--></para>
- <para>To negotiate user pointer I/O, applications initialize only
-the <structfield>type</structfield> field and set
-<structfield>memory</structfield> to
-<constant>V4L2_MEMORY_USERPTR</constant>. When the ioctl is called
-with a pointer to this structure the driver prepares for user pointer
-I/O, when this I/O method is not supported the ioctl returns an
-&EINVAL;.</para>
-
<table pgwide="1" frame="none" id="v4l2-requestbuffers">
<title>struct <structname>v4l2_requestbuffers</structname></title>
<tgroup cols="3">
<row>
<entry>__u32</entry>
<entry><structfield>count</structfield></entry>
- <entry>The number of buffers requested or granted. This
-field is only used when <structfield>memory</structfield> is set to
-<constant>V4L2_MEMORY_MMAP</constant>.</entry>
+ <entry>The number of buffers requested or granted.</entry>
</row>
<row>
<entry>&v4l2-buf-type;</entry>
<entry><structfield>reserved</structfield>[2]</entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types <constant>V4L2_BUF_TYPE_PRIVATE</constant> and
-higher.</entry>
+higher. This array should be zeroed by applications.</entry>
</row>
</tbody>
</tgroup>
All the functionality of flush_icache_page can be implemented in
flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
remove this interface completely.
+
+The final category of APIs is for I/O to deliberately aliased address
+ranges inside the kernel. Such aliases are set up by use of the
+vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O
+subsystem assumes that the user mapping and kernel offset mapping are
+the only aliases. This isn't true for vmap aliases, so anything in
+the kernel trying to do I/O to vmap areas must manually manage
+coherency. It must do this by flushing the vmap range before doing
+I/O and invalidating it after the I/O returns.
+
+ void flush_kernel_vmap_range(void *vaddr, int size)
+ flushes the kernel cache for a given virtual address range in
+ the vmap area. This is to make sure that any data the kernel
+ modified in the vmap range is made visible to the physical
+ page. The design is to make this area safe to perform I/O on.
+ Note that this API does *not* also flush the offset map alias
+ of the area.
+
+ void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
+ the cache for a given virtual address range in the vmap area
+ which prevents the processor from making the cache stale by
+ speculatively reading data while the I/O was occurring to the
+ physical pages. This is only necessary for data reads into the
+ vmap area.
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
- "af9015");
+ "af9015", "ngene");
# Check args
syntax() if (scalar(@ARGV) != 1);
die $@ if $@;
print STDERR <<EOF;
Firmware(s) $outfile extracted successfully.
-Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
+Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
exit(0);
close INFILE;
}
+sub ngene {
+ my $url = "http://www.digitaldevices.de/download/";
+ my $file1 = "ngene_15.fw";
+ my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
+ my $file2 = "ngene_17.fw";
+ my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+
+ checkstandard();
+
+ wgetfile($file1, $url . $file1);
+ verify($file1, $hash1);
+
+ wgetfile($file2, $url . $file2);
+ verify($file2, $hash2);
+
+ "$file1, $file2";
+}
+
# ---------------------------------------------------------------
# Utilities
sub syntax() {
print STDERR "syntax: get_dvb_firmware <component>\n";
print STDERR "Supported components:\n";
+ @components = sort @components;
for($i=0; $i < scalar(@components); $i++) {
print STDERR "\t" . $components[$i] . "\n";
}
+1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.17.1-rc1
+3 Older Version : 00.00.04.12
+
+1. Add the pad_0 in mfi frame structure to 0 to fix the
+ context value larger than 32bit value issue.
+
+2. Add the logic drive list to the driver. Driver will
+ keep the logic drive list internal after driver load.
+
+3. driver fixed the device update issue after get the AEN
+ PD delete/ADD, LD add/delete from FW.
+
1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
+ 28 -> LEADTEK WinFast PxTV1200 [107d:6f22]
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
174 -> Asus Europa Hybrid OEM [1043:4847]
175 -> Leadtek Winfast DTV1000S [107d:6655]
+176 -> Beholder BeholdTV 505 RDS [0000:5051]
tuner=81 - Partsnic (Daewoo) PTI-5NF05
tuner=82 - Philips CU1216L
tuner=83 - NXP TDA18271
+tuner=84 - Sony BTF-Pxn01Z
--- /dev/null
+tlg2300 release notes
+====================
+
+This is a v4l2/dvb device driver for the tlg2300 chip.
+
+
+current status
+==============
+
+video
+ - support mmap and read().(no overlay)
+
+audio
+ - The driver will register a ALSA card for the audio input.
+
+vbi
+ - Works for almost TV norms.
+
+dvb-t
+ - works for DVB-T
+
+FM
+ - Works for radio.
+
+---------------------------------------------------------------------------
+TESTED APPLICATIONS:
+
+-VLC1.0.4 test the video and dvb. The GUI is friendly to use.
+
+-Mplayer test the video.
+
+-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
+ --enable-radio-capture.
+ The command runs as this(The alsa audio registers to card 1):
+ #mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
+ -rawaudio rate=48000:channels=2
+
+---------------------------------------------------------------------------
+KNOWN PROBLEMS:
+about preemphasis:
+ You can set the preemphasis for radio by the following command:
+ #v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1
+
+ "pre_emphasis_settings=1" means that you select the 50us. If you want
+ to select the 75us, please use "pre_emphasis_settings=2"
+
+
ov519 041e:4067 Creative Live! Cam Video IM (VF0350)
ov519 041e:4068 Creative Live! VISTA VF0470
spca561 0458:7004 Genius VideoCAM Express V2
+sn9c2028 0458:7005 Genius Smart 300, version 2
sunplus 0458:7006 Genius Dsc 1.3 Smart
zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
sunplus 04a5:3008 Benq DC 1500
sunplus 04a5:300a Benq DC 3410
spca500 04a5:300c Benq DC 1016
+benq 04a5:3035 Benq DC E300
finepix 04cb:0104 Fujifilm FinePix 4800
finepix 04cb:0109 Fujifilm FinePix A202
finepix 04cb:010b Fujifilm FinePix A203
spca500 04fc:7333 PalmPixDC85
sunplus 04fc:ffff Pure DigitalDakota
spca501 0506:00df 3Com HomeConnect Lite
+sunplus 052b:1507 Megapixel 5 Pretec DC-1007
sunplus 052b:1513 Megapix V4
sunplus 052b:1803 MegaImage VI
tv8532 0545:808b Veo Stingray
sunplus 0546:3273 Polaroid PDC2030
ov519 054c:0154 Sonny toy4
ov519 054c:0155 Sonny toy5
+cpia1 0553:0002 CPIA CPiA (version1) based cameras
zc3xx 055f:c005 Mustek Wcam300A
spca500 055f:c200 Mustek Gsmart 300
sunplus 055f:c211 Kowa Bs888e Microcamera
spca500 06be:0800 Optimedia
sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom
spca506 06e1:a190 ADS Instant VCD
-ov534 06f8:3002 Hercules Blog Webcam
-ov534 06f8:3003 Hercules Dualpix HD Weblog
+ov534_9 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7302 06f8:3009 Hercules Classic Link
sunplus 0733:3261 Concord 3045 spca536a
sunplus 0733:3281 Cyberpix S550V
spca506 0734:043b 3DeMon USB Capture aka
+cpia1 0813:0001 QX3 camera
ov519 0813:0002 Dual Mode USB Camera Plus
spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
sunplus 08ca:2060 Aiptek PocketDV5300
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
-mr97310a 093a:010f Sakar Digital no. 77379
+mr97310a 093a:010e All known CIF cams with this ID
+mr97310a 093a:010f All known VGA cams with this ID
pac207 093a:2460 Qtec Webcam 100
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
+sonixj 0c45:614a Frontech E-Ccam (JIL-2225)
sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
+sn9c2028 0c45:8001 Wild Planet Digital Spy Camera
+sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams
+sn9c2028 0c45:8008 Mini-Shotz ms-350
+sn9c2028 0c45:800a Vivitar Vivicam 3350B
sunplus 0d64:0303 Sunplus FashionCam DXG
ov519 0e96:c001 TRUST 380 USB2 SPACEC@M
etoms 102c:6151 Qcam Sangha CIF
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
-sq905c 2770:9050 sq905c
-sq905c 2770:905c DualCamera
-sq905 2770:9120 Argus Digital Camera DC1512
-sq905c 2770:913d sq905c
+sq905c 2770:9050 Disney pix micro (CIF)
+sq905c 2770:9052 Disney pix micro 2 (VGA)
+sq905c 2770:905c All 11 known cameras with this ID
+sq905 2770:9120 All 24 known cameras with this ID
+sq905c 2770:913d All 4 known cameras with this ID
spca500 2899:012c Toptro Industrial
ov519 8020:ef04 ov519
spca508 8086:0110 Intel Easy PC Camera
video buffer helper functions
-----------------------------
-The v4l2 core API provides a standard method for dealing with video
-buffers. Those methods allow a driver to implement read(), mmap() and
-overlay() on a consistent way.
-
-There are currently methods for using video buffers on devices that
-supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
-linear access (videobuf-dma-contig), and vmalloced buffers, mostly
-used on USB drivers (videobuf-vmalloc).
-
-Any driver using videobuf should provide operations (callbacks) for
-four handlers:
-
-ops->buf_setup - calculates the size of the video buffers and avoid they
- to waste more than some maximum limit of RAM;
-ops->buf_prepare - fills the video buffer structs and calls
- videobuf_iolock() to alloc and prepare mmaped memory;
-ops->buf_queue - advices the driver that another buffer were
- requested (by read() or by QBUF);
-ops->buf_release - frees any buffer that were allocated.
-
-In order to use it, the driver need to have a code (generally called at
-interrupt context) that will properly handle the buffer request lists,
-announcing that a new buffer were filled.
-
-The irq handling code should handle the videobuf task lists, in order
-to advice videobuf that a new frame were filled, in order to honor to a
-request. The code is generally like this one:
- if (list_empty(&dma_q->active))
- return;
-
- buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
-
- if (!waitqueue_active(&buf->vb.done))
- return;
-
- /* Some logic to handle the buf may be needed here */
-
- list_del(&buf->vb.queue);
- do_gettimeofday(&buf->vb.ts);
- wake_up(&buf->vb.done);
-
-Those are the videobuffer functions used on drivers, implemented on
-videobuf-core:
-
-- Videobuf init functions
- videobuf_queue_sg_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that uses DMA
- Scatter/Gather buffers.
-
- videobuf_queue_dma_contig_init
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that need DMA
- contiguous buffers.
-
- videobuf_queue_vmalloc_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on USB (and other drivers)
- that need a vmalloced type of videobuf.
-
-- videobuf_iolock()
- Prepares the videobuf memory for the proper method (read, mmap, overlay).
-
-- videobuf_queue_is_busy()
- Checks if a videobuf is streaming.
-
-- videobuf_queue_cancel()
- Stops video handling.
-
-- videobuf_mmap_free()
- frees mmap buffers.
-
-- videobuf_stop()
- Stops video handling, ends mmap and frees mmap and other buffers.
-
-- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
- videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
- videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
-
-- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
- videobuf_cgmbuf()
- This function is used to provide backward compatibility with V4L1
- API.
-
-- Some help functions for read()/poll() operations:
- videobuf_read_stream()
- For continuous stream read()
- videobuf_read_one()
- For snapshot read()
- videobuf_poll_stream()
- polling help function
-
-The better way to understand it is to take a look at vivi driver. One
-of the main reasons for vivi is to be a videobuf usage example. the
-vivi_thread_tick() does the task that the IRQ callback would do on PCI
-drivers (or the irq callback on USB).
+The v4l2 core API provides a set of standard methods (called "videobuf")
+for dealing with video buffers. Those methods allow a driver to implement
+read(), mmap() and overlay() in a consistent way. There are currently
+methods for using video buffers on devices that supports DMA with
+scatter/gather method (videobuf-dma-sg), DMA with linear access
+(videobuf-dma-contig), and vmalloced buffers, mostly used on USB drivers
+(videobuf-vmalloc).
+
+Please see Documentation/video4linux/videobuf for more information on how
+to use the videobuf layer.
--- /dev/null
+An introduction to the videobuf layer
+Jonathan Corbet <corbet@lwn.net>
+Current as of 2.6.33
+
+The videobuf layer functions as a sort of glue layer between a V4L2 driver
+and user space. It handles the allocation and management of buffers for
+the storage of video frames. There is a set of functions which can be used
+to implement many of the standard POSIX I/O system calls, including read(),
+poll(), and, happily, mmap(). Another set of functions can be used to
+implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
+including buffer allocation, queueing and dequeueing, and streaming
+control. Using videobuf imposes a few design decisions on the driver
+author, but the payback comes in the form of reduced code in the driver and
+a consistent implementation of the V4L2 user-space API.
+
+Buffer types
+
+Not all video devices use the same kind of buffers. In fact, there are (at
+least) three common variations:
+
+ - Buffers which are scattered in both the physical and (kernel) virtual
+ address spaces. (Almost) all user-space buffers are like this, but it
+ makes great sense to allocate kernel-space buffers this way as well when
+ it is possible. Unfortunately, it is not always possible; working with
+ this kind of buffer normally requires hardware which can do
+ scatter/gather DMA operations.
+
+ - Buffers which are physically scattered, but which are virtually
+ contiguous; buffers allocated with vmalloc(), in other words. These
+ buffers are just as hard to use for DMA operations, but they can be
+ useful in situations where DMA is not available but virtually-contiguous
+ buffers are convenient.
+
+ - Buffers which are physically contiguous. Allocation of this kind of
+ buffer can be unreliable on fragmented systems, but simpler DMA
+ controllers cannot deal with anything else.
+
+Videobuf can work with all three types of buffers, but the driver author
+must pick one at the outset and design the driver around that decision.
+
+[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
+which are located within the system's video memory. The overlay
+functionality is considered to be deprecated for most use, but it still
+shows up occasionally in system-on-chip drivers where the performance
+benefits merit the use of this technique. Overlay buffers can be handled
+as a form of scattered buffer, but there are very few implementations in
+the kernel and a description of this technique is currently beyond the
+scope of this document.]
+
+Data structures, callbacks, and initialization
+
+Depending on which type of buffers are being used, the driver should
+include one of the following files:
+
+ <media/videobuf-dma-sg.h> /* Physically scattered */
+ <media/videobuf-vmalloc.h> /* vmalloc() buffers */
+ <media/videobuf-dma-contig.h> /* Physically contiguous */
+
+The driver's data structure describing a V4L2 device should include a
+struct videobuf_queue instance for the management of the buffer queue,
+along with a list_head for the queue of available buffers. There will also
+need to be an interrupt-safe spinlock which is used to protect (at least)
+the queue.
+
+The next step is to write four simple callbacks to help videobuf deal with
+the management of buffers:
+
+ struct videobuf_queue_ops {
+ int (*buf_setup)(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size);
+ int (*buf_prepare)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb,
+ enum v4l2_field field);
+ void (*buf_queue)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ void (*buf_release)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ };
+
+buf_setup() is called early in the I/O process, when streaming is being
+initiated; its purpose is to tell videobuf about the I/O stream. The count
+parameter will be a suggested number of buffers to use; the driver should
+check it for rationality and adjust it if need be. As a practical rule, a
+minimum of two buffers are needed for proper streaming, and there is
+usually a maximum (which cannot exceed 32) which makes sense for each
+device. The size parameter should be set to the expected (maximum) size
+for each frame of data.
+
+Each buffer (in the form of a struct videobuf_buffer pointer) will be
+passed to buf_prepare(), which should set the buffer's size, width, height,
+and field fields properly. If the buffer's state field is
+VIDEOBUF_NEEDS_INIT, the driver should pass it to:
+
+ int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf);
+
+Among other things, this call will usually allocate memory for the buffer.
+Finally, the buf_prepare() function should set the buffer's state to
+VIDEOBUF_PREPARED.
+
+When a buffer is queued for I/O, it is passed to buf_queue(), which should
+put it onto the driver's list of available buffers and set its state to
+VIDEOBUF_QUEUED. Note that this function is called with the queue spinlock
+held; if it tries to acquire it as well things will come to a screeching
+halt. Yes, this is the voice of experience. Note also that videobuf may
+wait on the first buffer in the queue; placing other buffers in front of it
+could again gum up the works. So use list_add_tail() to enqueue buffers.
+
+Finally, buf_release() is called when a buffer is no longer intended to be
+used. The driver should ensure that there is no I/O active on the buffer,
+then pass it to the appropriate free routine(s):
+
+ /* Scatter/gather drivers */
+ int videobuf_dma_unmap(struct videobuf_queue *q,
+ struct videobuf_dmabuf *dma);
+ int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+ /* vmalloc drivers */
+ void videobuf_vmalloc_free (struct videobuf_buffer *buf);
+
+ /* Contiguous drivers */
+ void videobuf_dma_contig_free(struct videobuf_queue *q,
+ struct videobuf_buffer *buf);
+
+One way to ensure that a buffer is no longer under I/O is to pass it to:
+
+ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+
+Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
+should be used (it should be zero in the buf_release() case), and intr
+controls whether an interruptible wait is used.
+
+File operations
+
+At this point, much of the work is done; much of the rest is slipping
+videobuf calls into the implementation of the other driver callbacks. The
+first step is in the open() function, which must initialize the
+videobuf queue. The function to use depends on the type of buffer used:
+
+ void videobuf_queue_sg_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+In each case, the parameters are the same: q is the queue structure for the
+device, ops is the set of callbacks as described above, dev is the device
+structure for this video device, irqlock is an interrupt-safe spinlock to
+protect access to the data structures, type is the buffer type used by the
+device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
+describes which field is being captured (often V4L2_FIELD_NONE for
+progressive devices), msize is the size of any containing structure used
+around struct videobuf_buffer, and priv is a private data pointer which
+shows up in the priv_data field of struct videobuf_queue. Note that these
+are void functions which, evidently, are immune to failure.
+
+V4L2 capture drivers can be written to support either of two APIs: the
+read() system call and the rather more complicated streaming mechanism. As
+a general rule, it is necessary to support both to ensure that all
+applications have a chance of working with the device. Videobuf makes it
+easy to do that with the same code. To implement read(), the driver need
+only make a call to one of:
+
+ ssize_t videobuf_read_one(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int nonblocking);
+
+ ssize_t videobuf_read_stream(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int vbihack, int nonblocking);
+
+Either one of these functions will read frame data into data, returning the
+amount actually read; the difference is that videobuf_read_one() will only
+read a single frame, while videobuf_read_stream() will read multiple frames
+if they are needed to satisfy the count requested by the application. A
+typical driver read() implementation will start the capture engine, call
+one of the above functions, then stop the engine before returning (though a
+smarter implementation might leave the engine running for a little while in
+anticipation of another read() call happening in the near future).
+
+The poll() function can usually be implemented with a direct call to:
+
+ unsigned int videobuf_poll_stream(struct file *file,
+ struct videobuf_queue *q,
+ poll_table *wait);
+
+Note that the actual wait queue eventually used will be the one associated
+with the first available buffer.
+
+When streaming I/O is done to kernel-space buffers, the driver must support
+the mmap() system call to enable user space to access the data. In many
+V4L2 drivers, the often-complex mmap() implementation simplifies to a
+single call to:
+
+ int videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma);
+
+Everything else is handled by the videobuf code.
+
+The release() function requires two separate videobuf calls:
+
+ void videobuf_stop(struct videobuf_queue *q);
+ int videobuf_mmap_free(struct videobuf_queue *q);
+
+The call to videobuf_stop() terminates any I/O in progress - though it is
+still up to the driver to stop the capture engine. The call to
+videobuf_mmap_free() will ensure that all buffers have been unmapped; if
+so, they will all be passed to the buf_release() callback. If buffers
+remain mapped, videobuf_mmap_free() returns an error code instead. The
+purpose is clearly to cause the closing of the file descriptor to fail if
+buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
+ignores its return value.
+
+ioctl() operations
+
+The V4L2 API includes a very long list of driver callbacks to respond to
+the many ioctl() commands made available to user space. A number of these
+- those associated with streaming I/O - turn almost directly into videobuf
+calls. The relevant helper functions are:
+
+ int videobuf_reqbufs(struct videobuf_queue *q,
+ struct v4l2_requestbuffers *req);
+ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
+ int nonblocking);
+ int videobuf_streamon(struct videobuf_queue *q);
+ int videobuf_streamoff(struct videobuf_queue *q);
+ int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
+ int count);
+
+So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
+vidioc_reqbufs() callback which, in turn, usually only needs to locate the
+proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
+These support functions can replace a great deal of buffer management
+boilerplate in a lot of V4L2 drivers.
+
+The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
+complex, of course, since they will also need to deal with starting and
+stopping the capture engine. videobuf_cgmbuf(), called from the driver's
+vidiocgmbuf() function, only exists if the V4L1 compatibility module has
+been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
+with #ifdef directives.
+
+Buffer allocation
+
+Thus far, we have talked about buffers, but have not looked at how they are
+allocated. The scatter/gather case is the most complex on this front. For
+allocation, the driver can leave buffer allocation entirely up to the
+videobuf layer; in this case, buffers will be allocated as anonymous
+user-space pages and will be very scattered indeed. If the application is
+using user-space buffers, no allocation is needed; the videobuf layer will
+take care of calling get_user_pages() and filling in the scatterlist array.
+
+If the driver needs to do its own memory allocation, it should be done in
+the vidioc_reqbufs() function, *after* calling videobuf_reqbufs(). The
+first step is a call to:
+
+ struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
+
+The returned videobuf_dmabuf structure (defined in
+<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
+
+ struct scatterlist *sglist;
+ int sglen;
+
+The driver must allocate an appropriately-sized scatterlist array and
+populate it with pointers to the pieces of the allocated buffer; sglen
+should be set to the length of the array.
+
+Drivers using the vmalloc() method need not (and cannot) concern themselves
+with buffer allocation at all; videobuf will handle those details. The
+same is normally true of contiguous-DMA drivers as well; videobuf will
+allocate the buffers (with dma_alloc_coherent()) when it sees fit. That
+means that these drivers may be trying to do high-order allocations at any
+time, an operation which is not always guaranteed to work. Some drivers
+play tricks by allocating DMA space at system boot time; videobuf does not
+currently play well with those drivers.
+
+As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
+as long as that buffer is physically contiguous. Normal user-space
+allocations will not meet that criterion, but buffers obtained from other
+kernel drivers, or those contained within huge pages, will work with these
+drivers.
+
+Filling the buffers
+
+The final part of a videobuf implementation has no direct callback - it's
+the portion of the code which actually puts frame data into the buffers,
+usually in response to interrupts from the device. For all types of
+drivers, this process works approximately as follows:
+
+ - Obtain the next available buffer and make sure that somebody is actually
+ waiting for it.
+
+ - Get a pointer to the memory and put video data there.
+
+ - Mark the buffer as done and wake up the process waiting for it.
+
+Step (1) above is done by looking at the driver-managed list_head structure
+- the one which is filled in the buf_queue() callback. Because starting
+the engine and enqueueing buffers are done in separate steps, it's possible
+for the engine to be running without any buffers available - in the
+vmalloc() case especially. So the driver should be prepared for the list
+to be empty. It is equally possible that nobody is yet interested in the
+buffer; the driver should not remove it from the list or fill it until a
+process is waiting on it. That test can be done by examining the buffer's
+done field (a wait_queue_head_t structure) with waitqueue_active().
+
+A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
+DMA; that ensures that the videobuf layer will not try to do anything with
+it while the device is transferring data.
+
+For scatter/gather drivers, the needed memory pointers will be found in the
+scatterlist structure described above. Drivers using the vmalloc() method
+can get a memory pointer with:
+
+ void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
+
+For contiguous DMA drivers, the function to use is:
+
+ dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+
+The contiguous DMA API goes out of its way to hide the kernel-space address
+of the DMA buffer from drivers.
+
+The final step is to set the size field of the relevant videobuf_buffer
+structure to the actual size of the captured image, set state to
+VIDEOBUF_DONE, then call wake_up() on the done queue. At this point, the
+buffer is owned by the videobuf layer and the driver should not touch it
+again.
+
+Developers who are interested in more information can go into the relevant
+header files; there are a few low-level functions declared there which have
+not been talked about here. Also worthwhile is the vivi driver
+(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
+drivers should be written. Vivi only uses the vmalloc() API, but it's good
+enough to get started with. Note also that all of these calls are exported
+GPL-only, so they will not be available to non-GPL kernel modules.
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@piie.net>
+L: platform-driver-x86@vger.kernel.org
W: http://piie.net/?section=acerhdf
S: Maintained
F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: aceracpi@googlegroups.com (subscribers-only)
+L: platform-driver-x86@vger.kernel.org
W: http://code.google.com/p/aceracpi
S: Maintained
F: drivers/platform/x86/acer-wmi.c
ACPI WMI DRIVER
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
-L: linux-acpi@vger.kernel.org
+L: platform-driver-x86@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
F: drivers/platform/x86/wmi.c
M: Corentin Chary <corentincj@iksaif.net>
M: Karol Kozimor <sziwan@users.sourceforge.net>
L: acpi4asus-user@lists.sourceforge.net
+L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus_acpi.c
ASUS LAPTOP EXTRAS DRIVER
M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
+L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Daniel Oliveira Nascimento <don@syst.com.br>
+L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/classmate-laptop.c
COMPAL LAPTOP SUPPORT
M: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/compal-laptop.c
DELL LAPTOP DRIVER
M: Matthew Garrett <mjg59@srcf.ucam.org>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/dell-laptop.c
EEEPC LAPTOP EXTRAS DRIVER
M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
+L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
F: Documentation/fault-injection/
F: lib/fault-inject.c
+FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
+M: Robert Love <robert.w.love@intel.com>
+L: devel@open-fcoe.org
+W: www.Open-FCoE.org
+S: Supported
+F: drivers/scsi/libfc/
+F: drivers/scsi/fcoe/
+F: include/scsi/fc/
+F: include/scsi/libfc.h
+F: include/scsi/libfcoe.h
+
FILE LOCKING (flock() and fcntl()/lockf())
M: Matthew Wilcox <matthew@wil.cx>
L: linux-fsdevel@vger.kernel.org
FUJITSU LAPTOP EXTRAS
M: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
-L: linux-acpi@vger.kernel.org
+L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-laptop.c
S: Maintained
F: drivers/char/virtio_console.c
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M: Peter Jones <pjones@redhat.com>
+M: Konrad Rzeszutek Wilk <konrad@kernel.org>
+S: Maintained
+F: drivers/firmware/iscsi_ibft*
+
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
+L: platform-driver-x86@vger.kernel.org
S: Odd Fixes
F: drivers/platform/x86/tc1100-wmi.c
INTEL MENLOW THERMAL DRIVER
M: Sujith Thomas <sujith.thomas@intel.com>
-L: linux-acpi@vger.kernel.org
+L: platform-driver-x86@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/platform/x86/intel_menlow.c
MSI LAPTOP SUPPORT
M: Lennart Poettering <mzxreary@0pointer.de>
+L: platform-driver-x86@vger.kernel.org
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
MSI WMI SUPPORT
M: Anisse Astier <anisse@astier.eu>
+L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/msi-wmi.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
M: Harald Welte <laforge@gnumonks.org>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
F: drivers/media/video/*7146*
F: include/media/*7146*
+TLG2300 VIDEO4LINUX-2 DRIVER
+M: Huang Shijie <shijie8@gmail.com>
+M: Kang Yong <kangyong@telegent.com>
+M: Zhang Xiaobing <xbzhang@telegent.com>
+S: Supported
+F: drivers/media/video/tlg2300
+
SC1200 WDT DRIVER
M: Zwane Mwaikambo <zwane@arm.linux.org.uk>
S: Maintained
SONY VAIO CONTROL DEVICE DRIVER
M: Mattia Dongili <malattia@linux.it>
-L: linux-acpi@vger.kernel.org
+L: platform-driver-x86@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
F: Documentation/laptops/sony-laptop.txt
THINKPAD ACPI EXTRAS DRIVER
M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
+L: platform-driver-x86@vger.kernel.org
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
T: git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
TOPSTAR LAPTOP EXTRAS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/topstar-laptop.c
TOSHIBA ACPI EXTRAS DRIVER
+L: platform-driver-x86@vger.kernel.org
S: Orphan
F: drivers/platform/x86/toshiba_acpi.c
F: Documentation/x86/
F: arch/x86/
+X86 PLATFORM DRIVERS
+M: Matthew Garrett <mjg@redhat.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86
+
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy@xensource.com>
M: Chris Wright <chrisw@sous-sol.org>
: "r" (0));
#endif
}
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+ if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+ __cpuc_flush_dcache_area(addr, (size_t)size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+ if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+ __cpuc_flush_dcache_area(addr, (size_t)size);
+}
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void flush_anon_page(struct vm_area_struct *vma,
#include <mach/nand.h>
#include <mach/keyscan.h>
+#include <media/tvp514x.h>
+
static inline int have_imager(void)
{
/* REVISIT when it's supported, trigger via Kconfig */
davinci_cfg_reg(DM365_SD1_DATA0);
}
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+ {
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+{
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+ {
+ .name = "tvp5146",
+ .grp_id = 0,
+ .num_inputs = ARRAY_SIZE(tvp5146_inputs),
+ .inputs = tvp5146_inputs,
+ .routes = tvp5146_routes,
+ .can_route = 1,
+ .ccdc_if_params = {
+ .if_type = VPFE_BT656,
+ .hdpol = VPFE_PINPOL_POSITIVE,
+ .vdpol = VPFE_PINPOL_POSITIVE,
+ },
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpfe_config vpfe_cfg = {
+ .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .sub_devs = vpfe_sub_devs,
+ .i2c_adapter_id = 1,
+ .card_name = "DM365 EVM",
+ .ccdc = "ISIF",
+};
+
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
static void __init dm365_evm_map_io(void)
{
+ /* setup input configuration for VPFE input devices */
+ dm365_set_vpfe_config(&vpfe_cfg);
dm365_init();
}
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
-
static struct clk clkout1_clk = {
.name = "clkout1",
.parent = &pll1_aux_clk,
.resource = dm355_asp1_resources,
};
+static void dm355_ccdc_setup_pinmux(void)
+{
+ davinci_cfg_reg(DM355_VIN_PCLK);
+ davinci_cfg_reg(DM355_VIN_CAM_WEN);
+ davinci_cfg_reg(DM355_VIN_CAM_VD);
+ davinci_cfg_reg(DM355_VIN_CAM_HD);
+ davinci_cfg_reg(DM355_VIN_YIN_EN);
+ davinci_cfg_reg(DM355_VIN_CINL_EN);
+ davinci_cfg_reg(DM355_VIN_CINH_EN);
+}
+
static struct resource dm355_vpss_resources[] = {
{
/* VPSS BL Base address */
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm355_ccdc_resource[] = {
/* CCDC Base address */
{
.flags = IORESOURCE_MEM,
.end = 0x01c70600 + 0x1ff,
},
};
+static struct platform_device dm355_ccdc_dev = {
+ .name = "dm355_ccdc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm355_ccdc_resource),
+ .resource = dm355_ccdc_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = dm355_ccdc_setup_pinmux,
+ },
+};
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
if (!cpu_is_davinci_dm355())
return 0;
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
+ clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
davinci_cfg_reg(DM355_INT_EDMA_CC);
platform_device_register(&dm355_edma_device);
platform_device_register(&dm355_vpss_device);
- /*
- * setup Mux configuration for vpfe input and register
- * vpfe capture platform device
- */
- davinci_cfg_reg(DM355_VIN_PCLK);
- davinci_cfg_reg(DM355_VIN_CAM_WEN);
- davinci_cfg_reg(DM355_VIN_CAM_VD);
- davinci_cfg_reg(DM355_VIN_CAM_HD);
- davinci_cfg_reg(DM355_VIN_YIN_EN);
- davinci_cfg_reg(DM355_VIN_CINL_EN);
- davinci_cfg_reg(DM355_VIN_CINH_EN);
+ platform_device_register(&dm355_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;
davinci_common_init(&davinci_soc_info_dm365);
}
+static struct resource dm365_vpss_resources[] = {
+ {
+ /* VPSS ISP5 Base address */
+ .name = "isp5",
+ .start = 0x01c70000,
+ .end = 0x01c70000 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VPSS CLK Base address */
+ .name = "vpss",
+ .start = 0x01c70200,
+ .end = 0x01c70200 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm365_vpss_device = {
+ .name = "vpss",
+ .id = -1,
+ .dev.platform_data = "dm365_vpss",
+ .num_resources = ARRAY_SIZE(dm365_vpss_resources),
+ .resource = dm365_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+ {
+ .start = IRQ_VDINT0,
+ .end = IRQ_VDINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_VDINT1,
+ .end = IRQ_VDINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+ .name = CAPTURE_DRV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(vpfe_resources),
+ .resource = vpfe_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static void dm365_isif_setup_pinmux(void)
+{
+ davinci_cfg_reg(DM365_VIN_CAM_WEN);
+ davinci_cfg_reg(DM365_VIN_CAM_VD);
+ davinci_cfg_reg(DM365_VIN_CAM_HD);
+ davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
+ davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
+}
+
+static struct resource isif_resource[] = {
+ /* ISIF Base address */
+ {
+ .start = 0x01c71000,
+ .end = 0x01c71000 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 0 */
+ {
+ .start = 0x1C7C000,
+ .end = 0x1C7C000 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 1 */
+ {
+ .start = 0x1C7C400,
+ .end = 0x1C7C400 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+static struct platform_device dm365_isif_dev = {
+ .name = "isif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isif_resource),
+ .resource = isif_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = dm365_isif_setup_pinmux,
+ },
+};
+
static int __init dm365_init_devices(void)
{
if (!cpu_is_davinci_dm365())
davinci_cfg_reg(DM365_INT_EDMA_CC);
platform_device_register(&dm365_edma_device);
platform_device_register(&dm365_emac_device);
-
+ /* Add isif clock alias */
+ clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
+ platform_device_register(&dm365_vpss_device);
+ platform_device_register(&dm365_isif_dev);
+ platform_device_register(&vpfe_capture_dev);
return 0;
}
postcore_initcall(dm365_init_devices);
+
+void dm365_set_vpfe_config(struct vpfe_config *cfg)
+{
+ vpfe_capture_dev.dev.platform_data = cfg;
+}
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm644x_ccdc_resource[] = {
+ /* CCDC Base address */
{
.start = 0x01c70400,
.end = 0x01c70400 + 0xff,
},
};
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device dm644x_ccdc_dev = {
+ .name = "dm644x_ccdc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
+ .resource = dm644x_ccdc_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
if (!cpu_is_davinci_dm644x())
return 0;
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
+ clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
platform_device_register(&dm644x_edma_device);
platform_device_register(&dm644x_emac_device);
platform_device_register(&dm644x_vpss_device);
+ platform_device_register(&dm644x_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
+#include <media/davinci/vpfe_capture.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
+void dm365_set_vpfe_config(struct vpfe_config *cfg);
#endif /* __ASM_ARCH_DM365_H */
},
};
+static struct amba_device cpu8815_amba_rng = {
+ .dev = {
+ .init_name = "rng",
+ },
+ __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
+};
+
static struct amba_device *amba_devs[] __initdata = {
cpu8815_amba_gpio + 0,
cpu8815_amba_gpio + 1,
cpu8815_amba_gpio + 2,
cpu8815_amba_gpio + 3,
+ &cpu8815_amba_rng
};
static int __init cpu8815_init(void)
#define PXA_CAMERA_VSP 0x400
struct pxacamera_platform_data {
- int (*init)(struct device *);
-
unsigned long flags;
unsigned long mclk_10khz;
};
#define flush_kernel_dcache_range(start,size) \
flush_kernel_dcache_range_asm((start), (start)+(size));
+/* vmap range flushes and invalidates. Architecturally, we don't need
+ * the invalidate, because the CPU should refuse to speculate once an
+ * area has been flushed, so invalidate is left empty */
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+ unsigned long start = (unsigned long)vaddr;
+
+ flush_kernel_dcache_range_asm(start, start + size);
+}
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+}
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
int ret;
- sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
- sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags &
+ sctx->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+ sctx->fallback.cip->base.crt_flags |= (tfm->crt_flags &
CRYPTO_TFM_REQ_MASK);
ret = crypto_cipher_setkey(sctx->fallback.cip, in_key, key_len);
if (ret) {
tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
- tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags &
+ tfm->crt_flags |= (sctx->fallback.cip->base.crt_flags &
CRYPTO_TFM_RES_MASK);
}
return ret;
select HAVE_LMB
select HAVE_OPROFILE
select HAVE_GENERIC_DMA_COHERENT
- select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_SYSCALL_TRACEPOINTS
select RTC_LIB
select GENERIC_ATOMIC64
def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_IOREMAP_PROT if MMU && !X2TLB
select HAVE_FUNCTION_TRACER
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_ARCH_KGDB
+ select HAVE_HW_BREAKPOINT
+ select PERF_EVENTS if HAVE_HW_BREAKPOINT
select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
-config GENERIC_IRQ_PROBE
+config IRQ_PER_CPU
def_bool y
-config IRQ_PER_CPU
+config SPARSE_IRQ
def_bool y
+ depends on SUPERH32
config GENERIC_GPIO
def_bool n
CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || \
- CPU_SUBTYPE_MXG || \
- CPU_SUBTYPE_SH7786
+ CPU_SUBTYPE_MXG
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
config SH_CLK_CPG_LEGACY
depends on SH_CLK_CPG
- def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE
+ def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
+ !CPU_SUBTYPE_SH7786
config SH_CLK_MD
int "CPU Mode Pin Setting"
LLSC, this should be more efficient than the other alternative of
disabling interrupts around the atomic sequence.
-config SPARSE_IRQ
- bool "Support sparse irq numbering"
- depends on EXPERIMENTAL
- help
- This enables support for sparse irqs. This is useful in general
- as most CPUs have a fairly sparse array of IRQ vectors, which
- the irq_desc then maps directly on to. Systems with a high
- number of off-chip IRQs will want to treat this as
- experimental until they have been independently verified.
-
- If you don't know what to do here, say N.
-
endmenu
menu "Boot options"
config PCI
bool "PCI support"
depends on SYS_SUPPORTS_PCI
+ select PCI_DOMAINS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you have PCI, say Y, otherwise N.
+config PCI_DOMAINS
+ bool
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
config SPECULATIVE_EXECUTION
bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+ depends on EXPERIMENTAL
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
help
This enables support for a speculative instruction fetch for
subroutine return. There are various pitfalls associated with
defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
+defaultimage-$(CONFIG_SH_SDK7786) := vmlinux.bin
# Set some sensible Kbuild defaults
KBUILD_IMAGE := $(defaultimage-y)
machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
+machdir-$(CONFIG_SH_SDK7786) += mach-sdk7786
machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
machdir-$(CONFIG_SH_LANDISK) += mach-landisk
-machdir-$(CONFIG_SH_TITAN) += mach-titan
machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
machdir-$(CONFIG_SH_RSK) += mach-rsk
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
- zImage vmlinux.srec romImage
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \
+ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
+ romImage
PHONY += $(BOOT_TARGETS)
all: $(KBUILD_IMAGE)
@echo ' zImage - Compressed kernel image'
@echo ' romImage - Compressed ROM image, if supported'
@echo ' vmlinux.srec - Create an ELF S-record'
+ @echo ' vmlinux.bin - Create an uncompressed binary image'
@echo '* uImage - Alias to bootable U-Boot image'
@echo ' uImage.srec - Create an S-record for U-Boot'
@echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
@echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
@echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
@echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
+ @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
endef
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
+config SH_SDK7786
+ bool "SDK7786"
+ depends on CPU_SUBTYPE_SH7786
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7786 if configuring for a Renesas Technology Europe
+ SH7786-65nm board.
+
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
obj-$(CONFIG_SH_ESPT) += board-espt.o
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
+obj-$(CONFIG_SH_TITAN) += board-titan.o
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
-#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Prefer cmdline over RedBoot */
static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
{
/* CS2: LAN (0x08000000 - 0x0bffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x36db0400, CS2BCR);
+ __raw_writel(0x36db0400, CS2BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x000003c0, CS2WCR);
+ __raw_writel(0x000003c0, CS2WCR);
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS4BCR);
+ __raw_writel(0x00000200, CS4BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS4WCR);
+ __raw_writel(0x00100981, CS4WCR);
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5ABCR);
+ __raw_writel(0x00000200, CS5ABCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5AWCR);
+ __raw_writel(0x00100981, CS5AWCR);
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5BBCR);
+ __raw_writel(0x00000200, CS5BBCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5BWCR);
+ __raw_writel(0x00100981, CS5BWCR);
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS6ABCR);
+ __raw_writel(0x00000200, CS6ABCR);
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- ctrl_outl(0x001009C1, CS6AWCR);
+ __raw_writel(0x001009C1, CS6AWCR);
}
static void __init setup_port_multiplexing(void)
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
*/
- ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
*/
- ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
*/
- ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+ __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
*/
- ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
*/
- ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+ __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
*/
- ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+ __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
*/
- ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+ __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
*/
- ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+ __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
*/
- ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
/* K7 (x); K6 (x); K5 (x); K4 (x);
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
*/
- ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+ __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
* L3 TCK; L2 (x); L1 (x); L0 (x);
*/
- ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
* M1 CS5B(CAN3_CS); M0 GPI+(nc);
*/
- ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+ __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
* LAN_RESET=off, BUZZER=off, LCD_BL=off
*/
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- ctrl_outb(0x30, PORT_PMDR);
+ __raw_writeb(0x30, PORT_PMDR);
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- ctrl_outb(0xF0, PORT_PMDR);
+ __raw_writeb(0xF0, PORT_PMDR);
#else
#error Unknown revision of PLATFORM_MP_R2
#endif
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
*/
- ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- ctrl_outb(0x10, PORT_PPDR);
+ __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ __raw_writeb(0x10, PORT_PPDR);
/* R7 A25; R6 A24; R5 A23; R4 A22;
* R3 A21; R2 A20; R1 A19; R0 A0;
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
*/
- ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+ __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
*/
- ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+ __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
*/
- ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+ __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
*/
- ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+ __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
static void __init mpr2_setup(char **cmdline_p)
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
*/
- ctrl_outw(0xAABC, PORT_PSELA);
+ __raw_writew(0xAABC, PORT_PSELA);
/* set Pin Select Register B:
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
*/
- ctrl_outw(0x3C00, PORT_PSELB);
+ __raw_writew(0x3C00, PORT_PSELB);
/* set Pin Select Register C:
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PSELC);
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELD);
+ __raw_writew(0x0000, PORT_PSELD);
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- ctrl_outw(0x0101, PORT_UTRCTL);
+ __raw_writew(0x0101, PORT_UTRCTL);
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+ __raw_writew(0xA5C0, PORT_UCLKCR_W);
setup_chip_select();
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 8,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PORT_PCDR,
- .end = PORT_PCDR,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = PORT_PCDR,
+ .end = PORT_PCDR,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct platform_device *polaris_devices[] __initdata = {
printk(KERN_INFO "Configuring Polaris external bus\n");
/* Configure area 5 with 2 wait states */
- wcr = ctrl_inw(WCR2);
+ wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
wcr |= (WAIT_STATES_10 << 10);
- ctrl_outw(wcr, WCR2);
+ __raw_writew(wcr, WCR2);
/* Configure area 5 for 32-bit access */
- bcr_mask = ctrl_inw(BCR2);
+ bcr_mask = __raw_readw(BCR2);
bcr_mask |= 1 << 10;
- ctrl_outw(bcr_mask, BCR2);
+ __raw_writew(bcr_mask, BCR2);
return platform_add_devices(polaris_devices,
ARRAY_SIZE(polaris_devices));
static void __init init_polaris_irq(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
#include <linux/i2c-algo-pca.h>
#include <linux/usb/r8a66597.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <mach/sh7785lcr.h>
* NOTE: This board has 2 physical memory maps.
* Please look at include/asm-sh/sh7785lcr.h or hardware manual.
*/
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
+static struct resource heartbeat_resource = {
+ .start = PLD_LEDCR,
+ .end = PLD_LEDCR,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
static struct mtd_partition nor_flash_partitions[] = {
pm_power_off = sh7785lcr_power_off;
/* sm501 DRAM configuration */
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(0x000307c2, sm501_reg);
+ sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+ if (!sm501_reg) {
+ printk(KERN_ERR "%s: ioremap error.\n", __func__);
+ return;
+ }
+
+ writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+ iounmap(sm501_reg);
}
/* Return the board specific boot mode pin configuration */
static void __init init_shmin_irq(void)
{
- ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
+ __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
+ __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
plat_irq_setup_pins(IRQ_MODE_IRQ);
}
}
static struct sh_machine_vector mv_titan __initmv = {
- .mv_name = "Titan",
-
- .mv_inb = titan_inb,
- .mv_inw = titan_inw,
- .mv_inl = titan_inl,
- .mv_outb = titan_outb,
- .mv_outw = titan_outw,
- .mv_outl = titan_outl,
-
- .mv_inb_p = titan_inb_p,
- .mv_inw_p = titan_inw,
- .mv_inl_p = titan_inl,
- .mv_outb_p = titan_outb_p,
- .mv_outw_p = titan_outw,
- .mv_outl_p = titan_outl,
-
- .mv_insl = titan_insl,
- .mv_outsl = titan_outsl,
-
- .mv_ioport_map = titan_ioport_map,
-
- .mv_init_irq = init_titan_irq,
+ .mv_name = "Titan",
+ .mv_init_irq = init_titan_irq,
};
* Renesas Technology Corp. SH7786 Urquell Support.
*
* Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009 Paul Mundt
+ * Copyright (C) 2009, 2010 Paul Mundt
*
* Based on board-sh7785lcr.c
* Copyright (C) 2008 Yoshihiro Shimoda
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <mach/urquell.h>
#include <cpu/sh7786.h>
#include <asm/heartbeat.h>
*/
/* HeartBeat */
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = BOARDREG(SLEDR),
- .end = BOARDREG(SLEDR),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 16,
+static struct resource heartbeat_resource = {
+ .start = BOARDREG(SLEDR),
+ .end = BOARDREG(SLEDR),
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* LAN91C111 */
return __raw_readw(UBOARDREG(MDSWMR));
}
+static int urquell_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ /*
+ * Only handle the EXTAL case, anyone interfacing a crystal
+ * resonator will need to provide their own input clock.
+ */
+ if (test_mode_pin(MODE_PIN9))
+ return -EINVAL;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333333);
+ clk_put(clk);
+
+ return ret;
+}
+
/* Initialize the board */
static void __init urquell_setup(char **cmdline_p)
{
.mv_setup = urquell_setup,
.mv_init_irq = urquell_init_irq,
.mv_mode_pins = urquell_mode_pins,
+ .mv_clk_init = urquell_clk_init,
};
msleep(100);
/* ASD AP-320/325 LCD ON */
- ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+ __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
/* backlight */
gpio_set_value(GPIO_PTS3, 0);
- ctrl_outw(0x100, FPGA_BKLREG);
+ __raw_writew(0x100, FPGA_BKLREG);
}
static void ap320_wvga_power_off(void *board_data)
{
/* backlight */
- ctrl_outw(0, FPGA_BKLREG);
+ __raw_writew(0, FPGA_BKLREG);
gpio_set_value(GPIO_PTS3, 1);
/* ASD AP-320/325 LCD OFF */
- ctrl_outw(0, FPGA_LCDREG);
+ __raw_writew(0, FPGA_LCDREG);
}
static struct sh_mobile_lcdc_info lcdc_info = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
};
static struct ov772x_camera_info ov7725_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+ .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \
+ OV772X_FLAG_8BIT,
.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
};
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
- ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+ __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
/* FLCTL */
gpio_request(GPIO_FN_FCE, NULL);
gpio_request(GPIO_FN_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
- ctrl_outw(0, PORT_HIZCRC);
- ctrl_outw(0xFFFF, PORT_DRVCRA);
- ctrl_outw(0xFFFF, PORT_DRVCRB);
+ __raw_writew(0, PORT_HIZCRC);
+ __raw_writew(0xFFFF, PORT_DRVCRA);
+ __raw_writew(0xFFFF, PORT_DRVCRB);
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask |= bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask &= ~bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE) &
- ctrl_inl(EPLD_MASK_BASE) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE) &
+ __raw_readl(EPLD_MASK_BASE) & 0xff;
if (status == 0) {
irq = -1;
} else {
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
- ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+ __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
if (status == 0) {
irq = -1;
} else {
/* Not reached */
return irq;
}
+
+void systemasic_irq_init(void)
+{
+ int i, nid = cpu_to_node(boot_cpu_data);
+
+ /* Assign all virtual IRQs to the System ASIC int. handler */
+ for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
+ unsigned int irq;
+
+ irq = create_irq_nr(i, nid);
+ if (unlikely(irq == 0)) {
+ pr_err("%s: failed hooking irq %d for systemasic\n",
+ __func__, i);
+ return;
+ }
+
+ if (unlikely(irq != i)) {
+ pr_err("%s: got irq %d but wanted %d, bailing.\n",
+ __func__, irq, i);
+ destroy_irq(irq);
+ return;
+ }
+
+ set_irq_chip_and_handler(i, &systemasic_int,
+ handle_level_irq);
+ }
+}
unsigned long val1, val2;
do {
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
ts->tv_sec = val1 - TWENTY_YEARS;
unsigned long adj = secs + TWENTY_YEARS;
do {
- ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+ __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+ __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
return 0;
#include <asm/machvec.h>
#include <mach/sysasic.h>
-extern struct irq_chip systemasic_int;
-extern void aica_time_init(void);
-extern int systemasic_irq_demux(int);
-
static void __init dreamcast_setup(char **cmdline_p)
{
- int i;
-
- /* Mask all hardware events */
- /* XXX */
-
- /* Acknowledge any previous events */
- /* XXX */
-
- /* Assign all virtual IRQs to the System ASIC int. handler */
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- set_irq_chip_and_handler(i, &systemasic_int,
- handle_level_irq);
-
board_time_init = aica_time_init;
}
.mv_name = "Sega Dreamcast",
.mv_setup = dreamcast_setup,
.mv_irq_demux = systemasic_irq_demux,
+ .mv_init_irq = systemasic_irq_init,
};
.balign 4
ENTRY(ecovec24_sdram_leave_start)
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_RSTANDBY, r0
+ bf resume_rstandby
+
/* DBSC: put memory in auto-refresh mode */
ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
rts
nop
+resume_rstandby:
+
+ /* DBSC: re-initialize and put in auto-refresh */
+
+ ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+ ED 0xFD000020, 0x015B0002 /* DBCONF */
+ ED 0xFD000030, 0x03071502 /* DBTR0 */
+ ED 0xFD000034, 0x02020102 /* DBTR1 */
+ ED 0xFD000038, 0x01090405 /* DBTR2 */
+ ED 0xFD00003C, 0x00000002 /* DBTR3 */
+ ED 0xFD000008, 0x00000005 /* DBKIND */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+ mov #100,r0
+WAIT_400NS:
+ dt r0
+ bf WAIT_400NS
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+ ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+ ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+ ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+ ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+ mov #100,r0
+WAIT_400NS_2:
+ dt r0
+ bf WAIT_400NS_2
+
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+ ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+ mov.l DUMMY,r0
+ mov.l @r0, r1 /* force single dummy read */
+
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ .balign 4
+DUMMY: .long 0xac400000
+
ENTRY(ecovec24_sdram_leave_end)
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
.nr_bits = 4,
.bit_pos = led_pos,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = 0xA405012C, /* PTG */
+ .end = 0xA405012E - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* MTD */
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);<
Code Review / linux-2.6.git / commitdiff