#include "libata.h"
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev);
-static void ata_set_mode(struct ata_port *ap);
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
struct ata_device *dev);
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev);
-static void ata_pio_error(struct ata_port *ap);
static unsigned int ata_unique_id = 1;
static struct workqueue_struct *ata_wq;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int atapi_dmadir = 0;
+module_param(atapi_dmadir, int, 0444);
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
}
static const struct ata_xfer_ent {
- unsigned int shift, bits;
+ int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
{ ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
return "<n/a>";
}
-static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
+static const char *sata_spd_string(unsigned int spd)
+{
+ static const char * const spd_str[] = {
+ "1.5 Gbps",
+ "3.0 Gbps",
+ };
+
+ if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
+ return "<unknown>";
+ return spd_str[spd - 1];
+}
+
+void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
{
- if (ata_dev_present(dev)) {
+ if (ata_dev_enabled(dev)) {
printk(KERN_WARNING "ata%u: dev %u disabled\n",
ap->id, dev->devno);
dev->class++;
* @ap: Port to which the command is sent
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
+ * @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
* @buf: Data buffer of the command
* @buflen: Length of data buffer
* None. Should be called with kernel context, might sleep.
*/
-static unsigned
-ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
- struct ata_taskfile *tf,
- int dma_dir, void *buf, unsigned int buflen)
+unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, void *buf, unsigned int buflen)
{
u8 command = tf->command;
struct ata_queued_cmd *qc;
BUG_ON(qc == NULL);
qc->tf = *tf;
+ if (cdb)
+ memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
ata_sg_init_one(qc, buf, buflen);
qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
*
* Kill the following code as soon as those drivers are fixed.
*/
- if (ap->flags & ATA_FLAG_PORT_DISABLED) {
+ if (ap->flags & ATA_FLAG_DISABLED) {
err_mask |= AC_ERR_SYSTEM;
ata_port_probe(ap);
}
tf.protocol = ATA_PROT_PIO;
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
if (err_mask) {
rc = -EIO;
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
- if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) {
+ if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
rc = -EINVAL;
reason = "device reports illegal type";
goto err_out;
* Some drives were very specific about that exact sequence.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
- err_mask = ata_dev_init_params(ap, dev);
+ err_mask = ata_dev_init_params(ap, dev, id[3], id[6]);
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
unsigned int xfer_mask;
int i, rc;
- if (!ata_dev_present(dev)) {
+ if (!ata_dev_enabled(dev)) {
DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
ap->id, dev->devno);
return 0;
id[84], id[85], id[86], id[87], id[88]);
/* initialize to-be-configured parameters */
- dev->flags = 0;
+ dev->flags &= ~ATA_DFLAG_CFG_MASK;
dev->max_sectors = 0;
dev->cdb_len = 0;
dev->n_sectors = 0;
if (dev->id[59] & 0x100) {
dev->multi_count = dev->id[59] & 0xff;
DPRINTK("ata%u: dev %u multi count %u\n",
- ap->id, device, dev->multi_count);
+ ap->id, dev->devno, dev->multi_count);
}
dev->cdb_len = 16;
/* ATAPI-specific feature tests */
else if (dev->class == ATA_DEV_ATAPI) {
+ char *cdb_intr_string = "";
+
rc = atapi_cdb_len(id);
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
}
dev->cdb_len = (unsigned int) rc;
- if (ata_id_cdb_intr(dev->id))
+ if (ata_id_cdb_intr(dev->id)) {
dev->flags |= ATA_DFLAG_CDB_INTR;
+ cdb_intr_string = ", CDB intr";
+ }
/* print device info to dmesg */
if (print_info)
- printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
- ap->id, dev->devno, ata_mode_string(xfer_mask));
+ printk(KERN_INFO "ata%u: dev %u ATAPI, max %s%s\n",
+ ap->id, dev->devno, ata_mode_string(xfer_mask),
+ cdb_intr_string);
}
ap->host->max_cmd_len = 0;
* PCI/etc. bus probe sem.
*
* RETURNS:
- * Zero on success, non-zero on error.
+ * Zero on success, negative errno otherwise.
*/
static int ata_bus_probe(struct ata_port *ap)
{
unsigned int classes[ATA_MAX_DEVICES];
- unsigned int i, rc, found = 0;
+ int tries[ATA_MAX_DEVICES];
+ int i, rc, down_xfermask;
+ struct ata_device *dev;
ata_port_probe(ap);
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ tries[i] = ATA_PROBE_MAX_TRIES;
+
+ retry:
+ down_xfermask = 0;
+
/* reset and determine device classes */
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ATA_DEV_UNKNOWN;
} else {
ap->ops->phy_reset(ap);
- if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+ if (!(ap->flags & ATA_FLAG_DISABLED))
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ap->device[i].class;
/* read IDENTIFY page and configure devices */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
-
- dev->class = classes[i];
+ dev = &ap->device[i];
- if (!ata_dev_present(dev))
- continue;
+ if (tries[i])
+ dev->class = classes[i];
- WARN_ON(dev->id != NULL);
- if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) {
- dev->class = ATA_DEV_NONE;
+ if (!ata_dev_enabled(dev))
continue;
- }
- if (ata_dev_configure(ap, dev, 1)) {
- ata_dev_disable(ap, dev);
- continue;
- }
+ kfree(dev->id);
+ dev->id = NULL;
+ rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id);
+ if (rc)
+ goto fail;
- found = 1;
+ rc = ata_dev_configure(ap, dev, 1);
+ if (rc)
+ goto fail;
}
- if (!found)
- goto err_out_disable;
+ /* configure transfer mode */
+ if (ap->ops->set_mode) {
+ /* FIXME: make ->set_mode handle no device case and
+ * return error code and failing device on failure as
+ * ata_set_mode() does.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (ata_dev_enabled(&ap->device[i])) {
+ ap->ops->set_mode(ap);
+ break;
+ }
+ rc = 0;
+ } else
+ rc = ata_set_mode(ap, &dev);
- ata_set_mode(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- goto err_out_disable;
+ if (rc) {
+ down_xfermask = 1;
+ goto fail;
+ }
- return 0;
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (ata_dev_enabled(&ap->device[i]))
+ return 0;
-err_out_disable:
+ /* no device present, disable port */
+ ata_port_disable(ap);
ap->ops->port_disable(ap);
- return -1;
+ return -ENODEV;
+
+ fail:
+ switch (rc) {
+ case -EINVAL:
+ case -ENODEV:
+ tries[dev->devno] = 0;
+ break;
+ case -EIO:
+ ata_down_sata_spd_limit(ap);
+ /* fall through */
+ default:
+ tries[dev->devno]--;
+ if (down_xfermask &&
+ ata_down_xfermask_limit(ap, dev, tries[dev->devno] == 1))
+ tries[dev->devno] = 0;
+ }
+
+ if (!tries[dev->devno]) {
+ ata_down_xfermask_limit(ap, dev, 1);
+ ata_dev_disable(ap, dev);
+ }
+
+ goto retry;
}
/**
void ata_port_probe(struct ata_port *ap)
{
- ap->flags &= ~ATA_FLAG_PORT_DISABLED;
+ ap->flags &= ~ATA_FLAG_DISABLED;
}
/**
*/
static void sata_print_link_status(struct ata_port *ap)
{
- u32 sstatus, tmp;
- const char *speed;
+ u32 sstatus, scontrol, tmp;
if (!ap->ops->scr_read)
return;
sstatus = scr_read(ap, SCR_STATUS);
+ scontrol = scr_read(ap, SCR_CONTROL);
if (sata_dev_present(ap)) {
tmp = (sstatus >> 4) & 0xf;
- if (tmp & (1 << 0))
- speed = "1.5";
- else if (tmp & (1 << 1))
- speed = "3.0";
- else
- speed = "<unknown>";
- printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
- ap->id, speed, sstatus);
+ printk(KERN_INFO
+ "ata%u: SATA link up %s (SStatus %X SControl %X)\n",
+ ap->id, sata_spd_string(tmp), sstatus, scontrol);
} else {
- printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
- ap->id, sstatus);
+ printk(KERN_INFO
+ "ata%u: SATA link down (SStatus %X SControl %X)\n",
+ ap->id, sstatus, scontrol);
}
}
else
ata_port_disable(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ if (ap->flags & ATA_FLAG_DISABLED)
return;
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
void sata_phy_reset(struct ata_port *ap)
{
__sata_phy_reset(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ if (ap->flags & ATA_FLAG_DISABLED)
return;
ata_bus_reset(ap);
}
struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
{
struct ata_device *pair = &ap->device[1 - adev->devno];
- if (!ata_dev_present(pair))
+ if (!ata_dev_enabled(pair))
return NULL;
return pair;
}
{
ap->device[0].class = ATA_DEV_NONE;
ap->device[1].class = ATA_DEV_NONE;
- ap->flags |= ATA_FLAG_PORT_DISABLED;
+ ap->flags |= ATA_FLAG_DISABLED;
+}
+
+/**
+ * ata_down_sata_spd_limit - adjust SATA spd limit downward
+ * @ap: Port to adjust SATA spd limit for
+ *
+ * Adjust SATA spd limit of @ap downward. Note that this
+ * function only adjusts the limit. The change must be applied
+ * using ata_set_sata_spd().
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 0 on success, negative errno on failure
+ */
+int ata_down_sata_spd_limit(struct ata_port *ap)
+{
+ u32 spd, mask;
+ int highbit;
+
+ if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
+ return -EOPNOTSUPP;
+
+ mask = ap->sata_spd_limit;
+ if (mask <= 1)
+ return -EINVAL;
+ highbit = fls(mask) - 1;
+ mask &= ~(1 << highbit);
+
+ spd = (scr_read(ap, SCR_STATUS) >> 4) & 0xf;
+ if (spd <= 1)
+ return -EINVAL;
+ spd--;
+ mask &= (1 << spd) - 1;
+ if (!mask)
+ return -EINVAL;
+
+ ap->sata_spd_limit = mask;
+
+ printk(KERN_WARNING "ata%u: limiting SATA link speed to %s\n",
+ ap->id, sata_spd_string(fls(mask)));
+
+ return 0;
+}
+
+static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
+{
+ u32 spd, limit;
+
+ if (ap->sata_spd_limit == UINT_MAX)
+ limit = 0;
+ else
+ limit = fls(ap->sata_spd_limit);
+
+ spd = (*scontrol >> 4) & 0xf;
+ *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4);
+
+ return spd != limit;
+}
+
+/**
+ * ata_set_sata_spd_needed - is SATA spd configuration needed
+ * @ap: Port in question
+ *
+ * Test whether the spd limit in SControl matches
+ * @ap->sata_spd_limit. This function is used to determine
+ * whether hardreset is necessary to apply SATA spd
+ * configuration.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 1 if SATA spd configuration is needed, 0 otherwise.
+ */
+int ata_set_sata_spd_needed(struct ata_port *ap)
+{
+ u32 scontrol;
+
+ if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
+ return 0;
+
+ scontrol = scr_read(ap, SCR_CONTROL);
+
+ return __ata_set_sata_spd_needed(ap, &scontrol);
+}
+
+/**
+ * ata_set_sata_spd - set SATA spd according to spd limit
+ * @ap: Port to set SATA spd for
+ *
+ * Set SATA spd of @ap according to sata_spd_limit.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 0 if spd doesn't need to be changed, 1 if spd has been
+ * changed. -EOPNOTSUPP if SCR registers are inaccessible.
+ */
+int ata_set_sata_spd(struct ata_port *ap)
+{
+ u32 scontrol;
+
+ if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
+ return -EOPNOTSUPP;
+
+ scontrol = scr_read(ap, SCR_CONTROL);
+ if (!__ata_set_sata_spd_needed(ap, &scontrol))
+ return 0;
+
+ scr_write(ap, SCR_CONTROL, scontrol);
+ return 1;
}
/*
return 0;
}
+/**
+ * ata_down_xfermask_limit - adjust dev xfer masks downward
+ * @ap: Port associated with device @dev
+ * @dev: Device to adjust xfer masks
+ * @force_pio0: Force PIO0
+ *
+ * Adjust xfer masks of @dev downward. Note that this function
+ * does not apply the change. Invoking ata_set_mode() afterwards
+ * will apply the limit.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 0 on success, negative errno on failure
+ */
+int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
+ int force_pio0)
+{
+ unsigned long xfer_mask;
+ int highbit;
+
+ xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
+ dev->udma_mask);
+
+ if (!xfer_mask)
+ goto fail;
+ /* don't gear down to MWDMA from UDMA, go directly to PIO */
+ if (xfer_mask & ATA_MASK_UDMA)
+ xfer_mask &= ~ATA_MASK_MWDMA;
+
+ highbit = fls(xfer_mask) - 1;
+ xfer_mask &= ~(1 << highbit);
+ if (force_pio0)
+ xfer_mask &= 1 << ATA_SHIFT_PIO;
+ if (!xfer_mask)
+ goto fail;
+
+ ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
+ &dev->udma_mask);
+
+ printk(KERN_WARNING "ata%u: dev %u limiting speed to %s\n",
+ ap->id, dev->devno, ata_mode_string(xfer_mask));
+
+ return 0;
+
+ fail:
+ return -EINVAL;
+}
+
static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
{
unsigned int err_mask;
int rc;
+ dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
}
rc = ata_dev_revalidate(ap, dev, 0);
- if (rc) {
- printk(KERN_ERR
- "ata%u: failed to revalidate after set xfermode\n",
- ap->id);
+ if (rc)
return rc;
- }
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
dev->xfer_shift, (int)dev->xfer_mode);
return 0;
}
-static int ata_host_set_pio(struct ata_port *ap)
-{
- int i;
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!ata_dev_present(dev))
- continue;
-
- if (!dev->pio_mode) {
- printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i);
- return -1;
- }
-
- dev->xfer_mode = dev->pio_mode;
- dev->xfer_shift = ATA_SHIFT_PIO;
- if (ap->ops->set_piomode)
- ap->ops->set_piomode(ap, dev);
- }
-
- return 0;
-}
-
-static void ata_host_set_dma(struct ata_port *ap)
-{
- int i;
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!ata_dev_present(dev) || !dev->dma_mode)
- continue;
-
- dev->xfer_mode = dev->dma_mode;
- dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
- if (ap->ops->set_dmamode)
- ap->ops->set_dmamode(ap, dev);
- }
-}
-
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
+ * @r_failed_dev: out paramter for failed device
*
- * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
+ * ata_set_mode() fails, pointer to the failing device is
+ * returned in @r_failed_dev.
*
* LOCKING:
* PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * 0 on success, negative errno otherwise
*/
-static void ata_set_mode(struct ata_port *ap)
+int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
{
- int i, rc;
+ struct ata_device *dev;
+ int i, rc = 0, used_dma = 0, found = 0;
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
unsigned int pio_mask, dma_mask;
- if (!ata_dev_present(dev))
+ dev = &ap->device[i];
+
+ if (!ata_dev_enabled(dev))
continue;
ata_dev_xfermask(ap, dev);
- /* TODO: let LLDD filter dev->*_mask here */
-
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
+
+ found = 1;
+ if (dev->dma_mode)
+ used_dma = 1;
}
+ if (!found)
+ goto out;
/* step 2: always set host PIO timings */
- rc = ata_host_set_pio(ap);
- if (rc)
- goto err_out;
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+ if (!ata_dev_enabled(dev))
+ continue;
+
+ if (!dev->pio_mode) {
+ printk(KERN_WARNING "ata%u: dev %u no PIO support\n",
+ ap->id, dev->devno);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dev->xfer_mode = dev->pio_mode;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
/* step 3: set host DMA timings */
- ata_host_set_dma(ap);
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (!ata_dev_enabled(dev) || !dev->dma_mode)
+ continue;
+
+ dev->xfer_mode = dev->dma_mode;
+ dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
+ if (ap->ops->set_dmamode)
+ ap->ops->set_dmamode(ap, dev);
+ }
/* step 4: update devices' xfer mode */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
+ dev = &ap->device[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
continue;
- if (ata_dev_set_mode(ap, dev))
- goto err_out;
+ rc = ata_dev_set_mode(ap, dev);
+ if (rc)
+ goto out;
}
+ /* Record simplex status. If we selected DMA then the other
+ * host channels are not permitted to do so.
+ */
+ if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX))
+ ap->host_set->simplex_claimed = 1;
+
+ /* step5: chip specific finalisation */
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
- return;
-
-err_out:
- ata_port_disable(ap);
+ out:
+ if (rc)
+ *r_failed_dev = dev;
+ return rc;
}
/**
*/
msleep(150);
-
/* Before we perform post reset processing we want to see if
- the bus shows 0xFF because the odd clown forgets the D7 pulldown
- resistor */
-
- if (ata_check_status(ap) == 0xFF)
- return 1; /* Positive is failure for some reason */
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
+ if (ata_check_status(ap) == 0xFF) {
+ printk(KERN_ERR "ata%u: SRST failed (status 0xFF)\n", ap->id);
+ return AC_ERR_OTHER;
+ }
ata_bus_post_reset(ap, devmask);
* Obtains host_set lock.
*
* SIDE EFFECTS:
- * Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
+ * Sets ATA_FLAG_DISABLED if bus reset fails.
*/
void ata_bus_reset(struct ata_port *ap)
static int sata_phy_resume(struct ata_port *ap)
{
unsigned long timeout = jiffies + (HZ * 5);
- u32 sstatus;
+ u32 scontrol, sstatus;
- scr_write_flush(ap, SCR_CONTROL, 0x300);
+ scontrol = scr_read(ap, SCR_CONTROL);
+ scontrol = (scontrol & 0x0f0) | 0x300;
+ scr_write_flush(ap, SCR_CONTROL, scontrol);
/* Wait for phy to become ready, if necessary. */
do {
* so makes reset sequence different from the original
* ->phy_reset implementation and Jeff nervous. :-P
*/
-extern void ata_std_probeinit(struct ata_port *ap)
+void ata_std_probeinit(struct ata_port *ap)
{
- if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
+ if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) {
+ u32 spd;
+
+ /* set cable type and resume link */
+ ap->cbl = ATA_CBL_SATA;
sata_phy_resume(ap);
+
+ /* init sata_spd_limit to the current value */
+ spd = (scr_read(ap, SCR_CONTROL) & 0xf0) >> 4;
+ if (spd)
+ ap->sata_spd_limit &= (1 << spd) - 1;
+
+ /* wait for device */
if (sata_dev_present(ap))
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
}
/**
* ata_std_softreset - reset host port via ATA SRST
* @ap: port to reset
- * @verbose: fail verbosely
* @classes: resulting classes of attached devices
*
* Reset host port using ATA SRST. This function is to be used
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
+int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
{
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
DPRINTK("about to softreset, devmask=%x\n", devmask);
err_mask = ata_bus_softreset(ap, devmask);
if (err_mask) {
- if (verbose)
- printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
- ap->id, err_mask);
- else
- DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
- err_mask);
+ printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
+ ap->id, err_mask);
return -EIO;
}
/**
* sata_std_hardreset - reset host port via SATA phy reset
* @ap: port to reset
- * @verbose: fail verbosely
* @class: resulting class of attached device
*
* SATA phy-reset host port using DET bits of SControl register.
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
+int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
{
+ u32 scontrol;
+
DPRINTK("ENTER\n");
- /* Issue phy wake/reset */
- scr_write_flush(ap, SCR_CONTROL, 0x301);
+ if (ata_set_sata_spd_needed(ap)) {
+ /* SATA spec says nothing about how to reconfigure
+ * spd. To be on the safe side, turn off phy during
+ * reconfiguration. This works for at least ICH7 AHCI
+ * and Sil3124.
+ */
+ scontrol = scr_read(ap, SCR_CONTROL);
+ scontrol = (scontrol & 0x0f0) | 0x302;
+ scr_write_flush(ap, SCR_CONTROL, scontrol);
+
+ ata_set_sata_spd(ap);
+ }
+
+ /* issue phy wake/reset */
+ scontrol = scr_read(ap, SCR_CONTROL);
+ scontrol = (scontrol & 0x0f0) | 0x301;
+ scr_write_flush(ap, SCR_CONTROL, scontrol);
- /*
- * Couldn't find anything in SATA I/II specs, but AHCI-1.1
+ /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
* 10.4.2 says at least 1 ms.
*/
msleep(1);
- /* Bring phy back */
+ /* bring phy back */
sata_phy_resume(ap);
/* TODO: phy layer with polling, timeouts, etc. */
}
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
- if (verbose)
- printk(KERN_ERR "ata%u: COMRESET failed "
- "(device not ready)\n", ap->id);
- else
- DPRINTK("EXIT, device not ready\n");
+ printk(KERN_ERR
+ "ata%u: COMRESET failed (device not ready)\n", ap->id);
return -EIO;
}
{
DPRINTK("ENTER\n");
- /* set cable type if it isn't already set */
- if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
- ap->cbl = ATA_CBL_SATA;
-
/* print link status */
if (ap->cbl == ATA_CBL_SATA)
sata_print_link_status(ap);
ata_reset_fn_t hardreset;
hardreset = NULL;
- if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
+ if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read)
hardreset = sata_std_hardreset;
return ata_drive_probe_reset(ap, ata_std_probeinit,
ata_std_postreset, classes);
}
-static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
- ata_postreset_fn_t postreset,
- unsigned int *classes)
+int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
+ ata_postreset_fn_t postreset, unsigned int *classes)
{
int i, rc;
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ATA_DEV_UNKNOWN;
- rc = reset(ap, 0, classes);
+ rc = reset(ap, classes);
if (rc)
return rc;
if (postreset)
postreset(ap, classes);
- return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV;
+ return 0;
}
/**
* - If classification is supported, fill classes[] with
* recognized class codes.
* - If classification is not supported, leave classes[] alone.
- * - If verbose is non-zero, print error message on failure;
- * otherwise, shut up.
*
* LOCKING:
* Kernel thread context (may sleep)
if (probeinit)
probeinit(ap);
- if (softreset) {
- rc = do_probe_reset(ap, softreset, postreset, classes);
- if (rc == 0)
- return 0;
+ if (softreset && !ata_set_sata_spd_needed(ap)) {
+ rc = ata_do_reset(ap, softreset, postreset, classes);
+ if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
+ goto done;
+ printk(KERN_INFO "ata%u: softreset failed, will try "
+ "hardreset in 5 secs\n", ap->id);
+ ssleep(5);
}
if (!hardreset)
- return rc;
+ goto done;
- rc = do_probe_reset(ap, hardreset, postreset, classes);
- if (rc == 0 || rc != -ENODEV)
- return rc;
+ while (1) {
+ rc = ata_do_reset(ap, hardreset, postreset, classes);
+ if (rc == 0) {
+ if (classes[0] != ATA_DEV_UNKNOWN)
+ goto done;
+ break;
+ }
+
+ if (ata_down_sata_spd_limit(ap))
+ goto done;
- if (softreset)
- rc = do_probe_reset(ap, softreset, postreset, classes);
+ printk(KERN_INFO "ata%u: hardreset failed, will retry "
+ "in 5 secs\n", ap->id);
+ ssleep(5);
+ }
+
+ if (softreset) {
+ printk(KERN_INFO "ata%u: hardreset succeeded without "
+ "classification, will retry softreset in 5 secs\n",
+ ap->id);
+ ssleep(5);
+ rc = ata_do_reset(ap, softreset, postreset, classes);
+ }
+
+ done:
+ if (rc == 0 && classes[0] == ATA_DEV_UNKNOWN)
+ rc = -ENODEV;
return rc;
}
int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
int post_reset)
{
- unsigned int class;
- u16 *id;
+ unsigned int class = dev->class;
+ u16 *id = NULL;
int rc;
- if (!ata_dev_present(dev))
- return -ENODEV;
-
- class = dev->class;
- id = NULL;
+ if (!ata_dev_enabled(dev)) {
+ rc = -ENODEV;
+ goto fail;
+ }
/* allocate & read ID data */
rc = ata_dev_read_id(ap, dev, &class, post_reset, &id);
dev->id = id;
/* configure device according to the new ID */
- return ata_dev_configure(ap, dev, 0);
+ rc = ata_dev_configure(ap, dev, 0);
+ if (rc == 0)
+ return 0;
fail:
printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n",
* known limits including host controller limits, device
* blacklist, etc...
*
+ * FIXME: The current implementation limits all transfer modes to
+ * the fastest of the lowested device on the port. This is not
+ * required on most controllers.
+ *
* LOCKING:
* None.
*/
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
{
+ struct ata_host_set *hs = ap->host_set;
unsigned long xfer_mask;
int i;
- xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
- ap->udma_mask);
+ xfer_mask = ata_pack_xfermask(ap->pio_mask,
+ ap->mwdma_mask, ap->udma_mask);
+
+ /* Apply cable rule here. Don't apply it early because when
+ * we handle hot plug the cable type can itself change.
+ */
+ if (ap->cbl == ATA_CBL_PATA40)
+ xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
- /* use port-wide xfermask for now */
+ /* FIXME: Use port-wide xfermask for now */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *d = &ap->device[i];
- if (!ata_dev_present(d))
+
+ if (ata_dev_absent(d))
continue;
- xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask,
- d->udma_mask);
+
+ if (ata_dev_disabled(d)) {
+ /* to avoid violating device selection timing */
+ xfer_mask &= ata_pack_xfermask(d->pio_mask,
+ UINT_MAX, UINT_MAX);
+ continue;
+ }
+
+ xfer_mask &= ata_pack_xfermask(d->pio_mask,
+ d->mwdma_mask, d->udma_mask);
xfer_mask &= ata_id_xfermask(d->id);
if (ata_dma_blacklisted(d))
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
"disabling DMA\n", ap->id, dev->devno);
- ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
- &dev->udma_mask);
+ if (hs->flags & ATA_HOST_SIMPLEX) {
+ if (hs->simplex_claimed)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ }
+
+ if (ap->ops->mode_filter)
+ xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+
+ ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
+ &dev->mwdma_mask, &dev->udma_mask);
}
/**
tf.protocol = ATA_PROT_NODATA;
tf.nsect = dev->xfer_mode;
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
*/
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev)
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
- u16 sectors = dev->id[6];
- u16 heads = dev->id[3];
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
- return 0;
+ return AC_ERR_INVALID;
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
tf.nsect = sectors;
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
if (ap->ops->check_atapi_dma)
rc = ap->ops->check_atapi_dma(qc);
+ /* We don't support polling DMA.
+ * Use PIO if the LLDD handles only interrupts in
+ * the HSM_ST_LAST state and the ATAPI device
+ * generates CDB interrupts.
+ */
+ if ((ap->flags & ATA_FLAG_PIO_POLLING) &&
+ (qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ rc = 1;
+
return rc;
}
/**
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
-/**
- * ata_pio_poll - poll using PIO, depending on current state
- * @ap: the target ata_port
- *
- * LOCKING:
- * None. (executing in kernel thread context)
- *
- * RETURNS:
- * timeout value to use
- */
-
-static unsigned long ata_pio_poll(struct ata_port *ap)
-{
- struct ata_queued_cmd *qc;
- u8 status;
- unsigned int poll_state = HSM_ST_UNKNOWN;
- unsigned int reg_state = HSM_ST_UNKNOWN;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
- switch (ap->hsm_task_state) {
- case HSM_ST:
- case HSM_ST_POLL:
- poll_state = HSM_ST_POLL;
- reg_state = HSM_ST;
- break;
- case HSM_ST_LAST:
- case HSM_ST_LAST_POLL:
- poll_state = HSM_ST_LAST_POLL;
- reg_state = HSM_ST_LAST;
- break;
- default:
- BUG();
- break;
- }
-
- status = ata_chk_status(ap);
- if (status & ATA_BUSY) {
- if (time_after(jiffies, ap->pio_task_timeout)) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- ap->hsm_task_state = HSM_ST_TMOUT;
- return 0;
- }
- ap->hsm_task_state = poll_state;
- return ATA_SHORT_PAUSE;
- }
-
- ap->hsm_task_state = reg_state;
- return 0;
-}
-
-/**
- * ata_pio_complete - check if drive is busy or idle
- * @ap: the target ata_port
- *
- * LOCKING:
- * None. (executing in kernel thread context)
- *
- * RETURNS:
- * Zero if qc completed.
- * Non-zero if has next.
- */
-
-static int ata_pio_complete (struct ata_port *ap)
-{
- struct ata_queued_cmd *qc;
- u8 drv_stat;
-
- /*
- * This is purely heuristic. This is a fast path. Sometimes when
- * we enter, BSY will be cleared in a chk-status or two. If not,
- * the drive is probably seeking or something. Snooze for a couple
- * msecs, then chk-status again. If still busy, fall back to
- * HSM_ST_LAST_POLL state.
- */
- drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
- if (drv_stat & ATA_BUSY) {
- msleep(2);
- drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
- if (drv_stat & ATA_BUSY) {
- ap->hsm_task_state = HSM_ST_LAST_POLL;
- ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
- return 1;
- }
- }
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
- drv_stat = ata_wait_idle(ap);
- if (!ata_ok(drv_stat)) {
- qc->err_mask |= __ac_err_mask(drv_stat);
- ap->hsm_task_state = HSM_ST_ERR;
- return 1;
- }
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- WARN_ON(qc->err_mask);
- ata_poll_qc_complete(qc);
-
- /* another command may start at this point */
-
- return 0;
-}
-
-
/**
* swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
}
}
-/**
- * ata_pio_first_block - Write first data block to hardware
- * @ap: Port to which ATA/ATAPI device is attached.
- *
- * When device has indicated its readiness to accept
- * the data, this function sends out the CDB or
- * the first data block by PIO.
- * After this,
- * - If polling, ata_pio_task() handles the rest.
- * - Otherwise, interrupt handler takes over.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * Zero if irq handler takes over
- * Non-zero if has next (polling).
- */
-
-static int ata_pio_first_block(struct ata_port *ap)
-{
- struct ata_queued_cmd *qc;
- u8 status;
- unsigned long flags;
- int has_next;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
- WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
-
- /* if polling, we will stay in the work queue after sending the data.
- * otherwise, interrupt handler takes over after sending the data.
- */
- has_next = (qc->tf.flags & ATA_TFLAG_POLLING);
-
- /* sleep-wait for BSY to clear */
- DPRINTK("busy wait\n");
- if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- ap->hsm_task_state = HSM_ST_TMOUT;
- goto err_out;
- }
-
- /* make sure DRQ is set */
- status = ata_chk_status(ap);
- if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
- /* device status error */
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- goto err_out;
- }
-
- /* Send the CDB (atapi) or the first data block (ata pio out).
- * During the state transition, interrupt handler shouldn't
- * be invoked before the data transfer is complete and
- * hsm_task_state is changed. Hence, the following locking.
- */
- spin_lock_irqsave(&ap->host_set->lock, flags);
-
- if (qc->tf.protocol == ATA_PROT_PIO) {
- /* PIO data out protocol.
- * send first data block.
- */
-
- /* ata_pio_sectors() might change the state to HSM_ST_LAST.
- * so, the state is changed here before ata_pio_sectors().
- */
- ap->hsm_task_state = HSM_ST;
- ata_pio_sectors(qc);
- ata_altstatus(ap); /* flush */
- } else
- /* send CDB */
- atapi_send_cdb(ap, qc);
-
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
- */
- return has_next;
-
-err_out:
- return 1; /* has next */
-}
-
/**
* __atapi_pio_bytes - Transfer data from/to the ATAPI device.
* @qc: Command on going
}
/**
- * ata_pio_block - start PIO on a block
+ * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
* @ap: the target ata_port
+ * @qc: qc on going
*
- * LOCKING:
- * None. (executing in kernel thread context)
+ * RETURNS:
+ * 1 if ok in workqueue, 0 otherwise.
*/
-static void ata_pio_block(struct ata_port *ap)
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
{
- struct ata_queued_cmd *qc;
- u8 status;
-
- /*
- * This is purely heuristic. This is a fast path.
- * Sometimes when we enter, BSY will be cleared in
- * a chk-status or two. If not, the drive is probably seeking
- * or something. Snooze for a couple msecs, then
- * chk-status again. If still busy, fall back to
- * HSM_ST_POLL state.
- */
- status = ata_busy_wait(ap, ATA_BUSY, 5);
- if (status & ATA_BUSY) {
- msleep(2);
- status = ata_busy_wait(ap, ATA_BUSY, 10);
- if (status & ATA_BUSY) {
- ap->hsm_task_state = HSM_ST_POLL;
- ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
- return;
- }
- }
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
- /* check error */
- if (status & (ATA_ERR | ATA_DF)) {
- qc->err_mask |= AC_ERR_DEV;
- ap->hsm_task_state = HSM_ST_ERR;
- return;
- }
-
- /* transfer data if any */
- if (is_atapi_taskfile(&qc->tf)) {
- /* DRQ=0 means no more data to transfer */
- if ((status & ATA_DRQ) == 0) {
- ap->hsm_task_state = HSM_ST_LAST;
- return;
- }
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return 1;
- atapi_pio_bytes(qc);
- } else {
- /* handle BSY=0, DRQ=0 as error */
- if ((status & ATA_DRQ) == 0) {
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- return;
- }
+ if (ap->hsm_task_state == HSM_ST_FIRST) {
+ if (qc->tf.protocol == ATA_PROT_PIO &&
+ (qc->tf.flags & ATA_TFLAG_WRITE))
+ return 1;
- ata_pio_sectors(qc);
+ if (is_atapi_taskfile(&qc->tf) &&
+ !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ return 1;
}
- ata_altstatus(ap); /* flush */
-}
-
-static void ata_pio_error(struct ata_port *ap)
-{
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
- if (qc->tf.command != ATA_CMD_PACKET)
- printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
-
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(qc->err_mask == 0);
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- ata_poll_qc_complete(qc);
+ return 0;
}
/**
* like DMA polling into the workqueue. Notice that
* in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
*/
- WARN_ON(in_wq != ((qc->tf.flags & ATA_TFLAG_POLLING) ||
- (ap->hsm_task_state == HSM_ST_FIRST &&
- ((qc->tf.protocol == ATA_PROT_PIO &&
- (qc->tf.flags & ATA_TFLAG_WRITE)) ||
- (is_atapi_taskfile(&qc->tf) &&
- !(qc->dev->flags & ATA_DFLAG_CDB_INTR))))));
-
- /* check error */
- if (unlikely(status & (ATA_ERR | ATA_DF))) {
- qc->err_mask |= AC_ERR_DEV;
- ap->hsm_task_state = HSM_ST_ERR;
- }
+ WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
fsm_start:
+ DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
/* Send first data block or PACKET CDB */
goto fsm_start;
}
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_DEV;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
/* Send the CDB (atapi) or the first data block (ata pio out).
* During the state transition, interrupt handler shouldn't
* be invoked before the data transfer is complete and
goto fsm_start;
}
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_DEV;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
atapi_pio_bytes(qc);
if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
goto fsm_start;
}
+ /* For PIO reads, some devices may ask for
+ * data transfer (DRQ=1) alone with ERR=1.
+ * We respect DRQ here and transfer one
+ * block of junk data before changing the
+ * hsm_task_state to HSM_ST_ERR.
+ *
+ * For PIO writes, ERR=1 DRQ=1 doesn't make
+ * sense since the data block has been
+ * transferred to the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ /* data might be corrputed */
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ ata_pio_sectors(qc);
+ ata_altstatus(ap);
+ status = ata_wait_idle(ap);
+ }
+
+ /* ata_pio_sectors() might change the
+ * state to HSM_ST_LAST. so, the state
+ * is changed after ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
ata_pio_sectors(qc);
if (ap->hsm_task_state == HSM_ST_LAST &&
(!(qc->tf.flags & ATA_TFLAG_WRITE))) {
/* all data read */
ata_altstatus(ap);
- status = ata_chk_status(ap);
+ status = ata_wait_idle(ap);
goto fsm_start;
}
}
}
/* no more data to transfer */
- DPRINTK("ata%u: command complete, drv_stat 0x%x\n",
- ap->id, status);
+ DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
+ ap->id, qc->dev->devno, status);
WARN_ON(qc->err_mask);
case HSM_ST_ERR:
if (qc->tf.command != ATA_CMD_PACKET)
- printk(KERN_ERR "ata%u: command error, drv_stat 0x%x\n",
- ap->id, status);
+ printk(KERN_ERR "ata%u: dev %u command error, drv_stat 0x%x\n",
+ ap->id, qc->dev->devno, status);
/* make sure qc->err_mask is available to
* know what's wrong and recover
ap->hsm_task_state = HSM_ST_IDLE;
+ /* complete taskfile transaction */
if (in_wq)
ata_poll_qc_complete(qc);
else
static void ata_pio_task(void *_data)
{
- struct ata_port *ap = _data;
- unsigned long timeout;
- int has_next;
-
-fsm_start:
- timeout = 0;
- has_next = 1;
-
- switch (ap->hsm_task_state) {
- case HSM_ST_FIRST:
- has_next = ata_pio_first_block(ap);
- break;
-
- case HSM_ST:
- ata_pio_block(ap);
- break;
-
- case HSM_ST_LAST:
- has_next = ata_pio_complete(ap);
- break;
-
- case HSM_ST_POLL:
- case HSM_ST_LAST_POLL:
- timeout = ata_pio_poll(ap);
- break;
-
- case HSM_ST_TMOUT:
- case HSM_ST_ERR:
- ata_pio_error(ap);
- return;
-
- default:
- BUG();
- return;
- }
-
- if (timeout)
- ata_port_queue_task(ap, ata_pio_task, ap, timeout);
- else if (has_next)
- goto fsm_start;
-}
-
-/**
- * ata_qc_timeout - Handle timeout of queued command
- * @qc: Command that timed out
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
+ struct ata_queued_cmd *qc = _data;
struct ata_port *ap = qc->ap;
- struct ata_host_set *host_set = ap->host_set;
- u8 host_stat = 0, drv_stat;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- spin_lock_irqsave(&host_set->lock, flags);
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- /* fall through */
-
- default:
- ata_altstatus(ap);
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat, host_stat);
+ u8 status;
+ int poll_next;
- ap->hsm_task_state = HSM_ST_IDLE;
+fsm_start:
+ WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
- /* complete taskfile transaction */
- qc->err_mask |= AC_ERR_TIMEOUT;
- break;
+ /*
+ * This is purely heuristic. This is a fast path.
+ * Sometimes when we enter, BSY will be cleared in
+ * a chk-status or two. If not, the drive is probably seeking
+ * or something. Snooze for a couple msecs, then
+ * chk-status again. If still busy, queue delayed work.
+ */
+ status = ata_busy_wait(ap, ATA_BUSY, 5);
+ if (status & ATA_BUSY) {
+ msleep(2);
+ status = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE);
+ return;
+ }
}
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- ata_eh_qc_complete(qc);
+ /* move the HSM */
+ poll_next = ata_hsm_move(ap, qc, status, 1);
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eng_timeout - Handle timeout of queued command
- * @ap: Port on which timed-out command is active
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-void ata_eng_timeout(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
-
- DPRINTK("EXIT\n");
+ /* another command or interrupt handler
+ * may be running at this point.
+ */
+ if (poll_next)
+ goto fsm_start;
}
/**
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
*/
-
-unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
+void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ qc->ap->active_tag = qc->tag;
+ qc->flags |= ATA_QCFLAG_ACTIVE;
+
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
ap->ops->qc_prep(qc);
- qc->ap->active_tag = qc->tag;
- qc->flags |= ATA_QCFLAG_ACTIVE;
-
- return ap->ops->qc_issue(qc);
+ qc->err_mask |= ap->ops->qc_issue(qc);
+ if (unlikely(qc->err_mask))
+ goto err;
+ return;
sg_err:
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- return AC_ERR_SYSTEM;
+ qc->err_mask |= AC_ERR_SYSTEM;
+err:
+ ata_qc_complete(qc);
}
-
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
break;
case ATA_PROT_ATAPI_DMA:
if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
+ /* see ata_check_atapi_dma() */
BUG();
break;
default:
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
/* always send first data block using
* the ata_pio_task() codepath.
ap->hsm_task_state = HSM_ST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
/* if polling, ata_pio_task() handles the rest.
* otherwise, interrupt handler takes over from here.
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
case ATA_PROT_ATAPI_DMA:
/* send cdb by polling if no cdb interrupt */
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
default:
if (unlikely(status & ATA_BUSY))
goto idle_irq;
- DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
-
/* ack bmdma irq events */
ap->ops->irq_clear(ap);
ap = host_set->ports[i];
if (ap &&
- !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
- err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
if (err)
printk(KERN_ERR "%s: ata command failed: %d\n",
__FUNCTION__, err);
int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
{
if (ap->flags & ATA_FLAG_SUSPENDED) {
+ struct ata_device *failed_dev;
ap->flags &= ~ATA_FLAG_SUSPENDED;
- ata_set_mode(ap);
+ while (ata_set_mode(ap, &failed_dev))
+ ata_dev_disable(ap, failed_dev);
}
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_start_drive(ap, dev);
*/
int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
{
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_flush_cache(ap, dev);
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- ap->flags = ATA_FLAG_PORT_DISABLED;
+ ap->flags = ATA_FLAG_DISABLED;
ap->id = host->unique_id;
ap->host = host;
ap->ctl = ATA_DEVCTL_OBS;
ap->flags |= ent->host_flags;
ap->ops = ent->port_ops;
ap->cbl = ATA_CBL_NONE;
+ ap->sata_spd_limit = UINT_MAX;
ap->active_tag = ATA_TAG_POISON;
ap->last_ctl = 0xFF;
host->transportt = &ata_scsi_transport_template;
- ap = (struct ata_port *) &host->hostdata[0];
+ ap = ata_shost_to_port(host);
ata_host_init(ap, host, host_set, ent, port_no);
host_set->mmio_base = ent->mmio_base;
host_set->private_data = ent->private_data;
host_set->ops = ent->port_ops;
+ host_set->flags = ent->host_set_flags;
/* register each port bound to this device */
for (i = 0; i < ent->n_ports; i++) {
int ata_scsi_release(struct Scsi_Host *host)
{
- struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ struct ata_port *ap = ata_shost_to_port(host);
int i;
DPRINTK("ENTER\n");
return rc;
}
+/**
+ * ata_wait_register - wait until register value changes
+ * @reg: IO-mapped register
+ * @mask: Mask to apply to read register value
+ * @val: Wait condition
+ * @interval_msec: polling interval in milliseconds
+ * @timeout_msec: timeout in milliseconds
+ *
+ * Waiting for some bits of register to change is a common
+ * operation for ATA controllers. This function reads 32bit LE
+ * IO-mapped register @reg and tests for the following condition.
+ *
+ * (*@reg & mask) != val
+ *
+ * If the condition is met, it returns; otherwise, the process is
+ * repeated after @interval_msec until timeout.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * The final register value.
+ */
+u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
+ unsigned long interval_msec,
+ unsigned long timeout_msec)
+{
+ unsigned long timeout;
+ u32 tmp;
+
+ tmp = ioread32(reg);
+
+ /* Calculate timeout _after_ the first read to make sure
+ * preceding writes reach the controller before starting to
+ * eat away the timeout.
+ */
+ timeout = jiffies + (timeout_msec * HZ) / 1000;
+
+ while ((tmp & mask) == val && time_before(jiffies, timeout)) {
+ msleep(interval_msec);
+ tmp = ioread32(reg);
+ }
+
+ return tmp;
+}
+
/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
EXPORT_SYMBOL_GPL(ata_sg_init_one);
EXPORT_SYMBOL_GPL(__ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_tf_load);
EXPORT_SYMBOL_GPL(ata_tf_read);
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
EXPORT_SYMBOL_GPL(ata_bmdma_status);
EXPORT_SYMBOL_GPL(ata_bmdma_stop);
EXPORT_SYMBOL_GPL(ata_port_probe);
+EXPORT_SYMBOL_GPL(ata_set_sata_spd);
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_dev_pair);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
+EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+
+EXPORT_SYMBOL_GPL(ata_scsi_error);
+EXPORT_SYMBOL_GPL(ata_eng_timeout);
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);