ata_exec_command_pio(ap, tf);
}
-/**
- * ata_exec - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues PIO/MMIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * Obtains host_set lock.
- */
-
-static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- unsigned long flags;
-
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ap->ops->exec_command(ap, tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-}
-
/**
* ata_tf_to_host - issue ATA taskfile to host controller
* @ap: port to which command is being issued
* other threads.
*
* LOCKING:
- * Obtains host_set lock.
- */
-
-static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- ap->ops->tf_load(ap, tf);
-
- ata_exec(ap, tf);
-}
-
-/**
- * ata_tf_to_host_nolock - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
- *
- * LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf)
+static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
ap->ops->exec_command(ap, tf);
*
* LOCKING:
* PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
*/
static unsigned int ata_bus_edd(struct ata_port *ap)
{
struct ata_taskfile tf;
+ unsigned long flags;
/* set up execute-device-diag (bus reset) taskfile */
/* also, take interrupts to a known state (disabled) */
tf.protocol = ATA_PROT_NODATA;
/* do bus reset */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
ata_tf_to_host(ap, &tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
/* spec says at least 2ms. but who knows with those
* crazy ATAPI devices...
if (qc->tf.flags & ATA_TFLAG_POLLING)
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
if (qc->tf.flags & ATA_TFLAG_POLLING)
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
if (qc->tf.flags & ATA_TFLAG_POLLING)
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST_FIRST;
/* send cdb by polling if no cdb interrupt */
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- scsi_assign_lock(host, &host_set->lock);
-
ap->flags = ATA_FLAG_PORT_DISABLED;
ap->id = host->unique_id;
ap->host = host;