Merge branch 'for-linus' of git://neil.brown.name/md
[linux-2.6.git] / drivers / mmc / host / atmel-mci.c
index 5e10d3663ab593ac2dbb71cfb34f022c31118819..fc25586b7ee1c94575e5674f89c3382c2a7ffd88 100644 (file)
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <asm/unaligned.h>
 
+#include <mach/cpu.h>
 #include <mach/board.h>
 
 #include "atmel-mci-regs.h"
@@ -209,6 +210,18 @@ struct atmel_mci_slot {
 #define atmci_set_pending(host, event)                         \
        set_bit(event, &host->pending_events)
 
+/*
+ * Enable or disable features/registers based on
+ * whether the processor supports them
+ */
+static bool mci_has_rwproof(void)
+{
+       if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
+               return false;
+       else
+               return true;
+}
+
 /*
  * The debugfs stuff below is mostly optimized away when
  * CONFIG_DEBUG_FS is not set.
@@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct seq_file *s,
                [3]     = "BLKE",
                [4]     = "DTIP",
                [5]     = "NOTBUSY",
+               [6]     = "ENDRX",
+               [7]     = "ENDTX",
                [8]     = "SDIOIRQA",
                [9]     = "SDIOIRQB",
+               [12]    = "SDIOWAIT",
+               [14]    = "RXBUFF",
+               [15]    = "TXBUFE",
                [16]    = "RINDE",
                [17]    = "RDIRE",
                [18]    = "RCRCE",
@@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct seq_file *s,
                [20]    = "RTOE",
                [21]    = "DCRCE",
                [22]    = "DTOE",
+               [23]    = "CSTOE",
+               [24]    = "BLKOVRE",
+               [25]    = "DMADONE",
+               [26]    = "FIFOEMPTY",
+               [27]    = "XFRDONE",
                [30]    = "OVRE",
                [31]    = "UNRE",
        };
@@ -856,13 +879,15 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                        clkdiv = 255;
                }
 
+               host->mode_reg = MCI_MR_CLKDIV(clkdiv);
+
                /*
                 * WRPROOF and RDPROOF prevent overruns/underruns by
                 * stopping the clock when the FIFO is full/empty.
                 * This state is not expected to last for long.
                 */
-               host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
-                                       | MCI_MR_RDPROOF;
+               if (mci_has_rwproof())
+                       host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
 
                if (list_empty(&host->queue))
                        mci_writel(host, MR, host->mode_reg);
@@ -1655,8 +1680,10 @@ static int __init atmci_probe(struct platform_device *pdev)
                        nr_slots++;
        }
 
-       if (!nr_slots)
+       if (!nr_slots) {
+               dev_err(&pdev->dev, "init failed: no slot defined\n");
                goto err_init_slot;
+       }
 
        dev_info(&pdev->dev,
                        "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",