/*
* cmd line parameters
*/
+static int mpt_msi_enable;
+module_param(mpt_msi_enable, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
#ifdef MFCNT
static int mfcounter = 0;
#define PRINT_MF_COUNT 20000
static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
static int GetLanConfigPages(MPT_ADAPTER *ioc);
-static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
static int GetIoUnitPage2(MPT_ADAPTER *ioc);
int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
-static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
/* module entry point */
u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
if (ioc->bus_type == FC)
mpt_fc_log_info(ioc, log_info);
- else if (ioc->bus_type == SCSI)
- mpt_sp_log_info(ioc, log_info);
+ else if (ioc->bus_type == SPI)
+ mpt_spi_log_info(ioc, log_info);
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SCSI &&
+ if (ioc->bus_type == SPI &&
cb_idx != mpt_stm_index &&
cb_idx != mpt_lan_index)
mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
} else if (func == MPI_FUNCTION_EVENT_ACK) {
dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n",
ioc->name));
- } else if (func == MPI_FUNCTION_CONFIG ||
- func == MPI_FUNCTION_TOOLBOX) {
+ } else if (func == MPI_FUNCTION_CONFIG) {
CONFIGPARMS *pCfg;
unsigned long flags;
return -1;
}
-int
-mpt_alt_ioc_wait(MPT_ADAPTER *ioc)
-{
- int loop_count = 30 * 4; /* Wait 30 seconds */
- int status = -1; /* -1 means failed to get board READY */
-
- do {
- spin_lock(&ioc->initializing_hba_lock);
- if (ioc->initializing_hba_lock_flag == 0) {
- ioc->initializing_hba_lock_flag=1;
- spin_unlock(&ioc->initializing_hba_lock);
- status = 0;
- break;
- }
- spin_unlock(&ioc->initializing_hba_lock);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ/4);
- } while (--loop_count);
-
- return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_bringup_adapter - This is a wrapper function for mpt_do_ioc_recovery
- * @ioc: Pointer to MPT adapter structure
- * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
- *
- * This routine performs all the steps necessary to bring the IOC
- * to a OPERATIONAL state.
- *
- * Special Note: This function was added with spin lock's so as to allow
- * the dv(domain validation) work thread to succeed on the other channel
- * that maybe occuring at the same time when this function is called.
- * Without this lock, the dv would fail when message frames were
- * requested during hba bringup on the alternate ioc.
- */
-static int
-mpt_bringup_adapter(MPT_ADAPTER *ioc, int sleepFlag)
-{
- int r;
-
- if(ioc->alt_ioc) {
- if((r=mpt_alt_ioc_wait(ioc->alt_ioc)!=0))
- return r;
- }
-
- r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
- CAN_SLEEP);
-
- if(ioc->alt_ioc) {
- spin_lock(&ioc->alt_ioc->initializing_hba_lock);
- ioc->alt_ioc->initializing_hba_lock_flag=0;
- spin_unlock(&ioc->alt_ioc->initializing_hba_lock);
- }
-
-return r;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_attach - Install a PCI intelligent MPT adapter.
dprintk((KERN_INFO MYNAM
": Not using 64 bit consistent mask\n"));
- ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
+ ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
if (ioc == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
return -ENOMEM;
}
- memset(ioc, 0, sizeof(MPT_ADAPTER));
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
+ spin_lock_init(&ioc->fc_rescan_work_lock);
+ spin_lock_init(&ioc->fc_rport_lock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
*/
INIT_LIST_HEAD(&ioc->configQ);
+ /* Initialize the fc rport list head.
+ */
+ INIT_LIST_HEAD(&ioc->fc_rports);
+
/* Find lookup slot. */
INIT_LIST_HEAD(&ioc->list);
ioc->id = mpt_ids++;
ioc->bus_type = FC;
ioc->errata_flag_1064 = 1;
}
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949E) {
+ ioc->prod_name = "LSIFC949E";
+ ioc->bus_type = FC;
+ }
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
ioc->prod_name = "LSI53C1030";
- ioc->bus_type = SCSI;
+ ioc->bus_type = SPI;
/* 1030 Chip Fix. Disable Split transactions
* for PCIX. Set MOST bits to zero if Rev < C0( = 8).
*/
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
ioc->prod_name = "LSI53C1035";
- ioc->bus_type = SCSI;
+ ioc->bus_type = SPI;
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
ioc->prod_name = "LSISAS1064";
ioc->pci_irq = -1;
if (pdev->irq) {
+ if (mpt_msi_enable && !pci_enable_msi(pdev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name);
+
r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
if (r < 0) {
*/
mpt_detect_bound_ports(ioc, pdev);
- if ((r = mpt_bringup_adapter(ioc, CAN_SLEEP)) != 0){
+ if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP)) != 0){
printk(KERN_WARNING MYNAM
": WARNING - %s did not initialize properly! (%d)\n",
ioc->name, r);
list_del(&ioc->list);
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(pdev);
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
iounmap(mem);
kfree(ioc);
pci_set_drvdata(pdev, NULL);
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
- int ii;
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
pci_enable_device(pdev);
/* enable interrupts */
- CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
- /* F/W not running */
- if(!CHIPREG_READ32(&ioc->chip->Doorbell)) {
- /* enable domain validation flags */
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV;
- }
- }
-
printk(MYIOC_s_INFO_FMT
"pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
ioc->name,
/* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
ioc->alt_ioc->active = 1;
}
if (ret == 0) {
/* Enable! (reply interrupt) */
- CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
}
/* (re)Enable alt-IOC! (reply interrupt) */
dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
ioc->alt_ioc->active = 1;
}
* (FCPortPage0_t stuff)
*/
for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) GetFcPortPage0(ioc, ii);
+ (void) mptbase_GetFcPortPage0(ioc, ii);
}
if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
if (ioc->pci_irq != -1) {
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
ioc->pci_irq = -1;
}
sz_last = ioc->alloc_total;
dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
+
kfree(ioc);
}
/* RAID FW may take a long time to enable
*/
- if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
+ (ioc->bus_type == SAS)) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 300 /*seconds*/, sleepFlag);
} else {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag);
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 30 /*seconds*/, sleepFlag);
}
return rc;
}
/* Clear the internal flash bad bit - autoincrementing register,
* so must do two writes.
*/
- if (ioc->bus_type == SCSI) {
+ if (ioc->bus_type == SPI) {
/*
* 1030 and 1035 H/W errata, workaround to access
* the ClearFlashBadSignatureBit
int cnt,cntdn;
dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
- if (ioc->bus_type == SCSI) {
+ if (ioc->bus_type == SPI) {
/* Always issue a Msg Unit Reset first. This will clear some
* SCSI bus hang conditions.
*/
dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
ioc->name, numSGE, num_sge, num_chain));
- if (ioc->bus_type == SCSI)
+ if (ioc->bus_type == SPI)
num_chain *= MPT_SCSI_CAN_QUEUE;
else
num_chain *= MPT_FC_CAN_QUEUE;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * GetFcPortPage0 - Fetch FCPort config Page0.
+ * mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: IOC Port number
*
* -EAGAIN if no msg frames currently available
* -EFAULT for non-successful reply or no reply (timeout)
*/
-static int
-GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
+int
+mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
{
ConfigPageHeader_t hdr;
CONFIGPARMS cfg;
int data_sz;
int copy_sz;
int rc;
+ int count = 400;
+
/* Get FCPort Page 0 header */
hdr.PageVersion = 0;
rc = -ENOMEM;
ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
if (ppage0_alloc) {
+
+ try_again:
memset((u8 *)ppage0_alloc, 0, data_sz);
cfg.physAddr = page0_dma;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
+ /*
+ * if still doing discovery,
+ * hang loose a while until finished
+ */
+ if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
+ if (count-- > 0) {
+ msleep_interruptible(100);
+ goto try_again;
+ }
+ printk(MYIOC_s_INFO_FMT "Firmware discovery not"
+ " complete.\n",
+ ioc->name);
+ }
}
pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
return 0;
}
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+static void
+mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
+ MpiEventDataRaid_t * pRaidEventData)
+{
+ int volume;
+ int reason;
+ int disk;
+ int status;
+ int flags;
+ int state;
+
+ volume = pRaidEventData->VolumeID;
+ reason = pRaidEventData->ReasonCode;
+ disk = pRaidEventData->PhysDiskNum;
+ status = le32_to_cpu(pRaidEventData->SettingsStatus);
+ flags = (status >> 0) & 0xff;
+ state = (status >> 8) & 0xff;
+
+ if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
+ return;
+ }
+
+ if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
+ reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
+ (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n",
+ ioc->name, disk);
+ } else {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
+ ioc->name, volume);
+ }
+
+ switch(reason) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ printk(MYIOC_s_INFO_FMT " volume has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+
+ printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
+ ioc->name,
+ state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
+ ? "optimal"
+ : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
+ ? "degraded"
+ : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
+ ? "failed"
+ : "state unknown",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
+ ? ", enabled" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
+ ? ", resync in progress" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
+ ioc->name,
+ state == MPI_PHYSDISK0_STATUS_ONLINE
+ ? "online"
+ : state == MPI_PHYSDISK0_STATUS_MISSING
+ ? "missing"
+ : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
+ ? "not compatible"
+ : state == MPI_PHYSDISK0_STATUS_FAILED
+ ? "failed"
+ : state == MPI_PHYSDISK0_STATUS_INITIALIZING
+ ? "initializing"
+ : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
+ ? "offline requested"
+ : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
+ ? "failed requested"
+ : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
+ ? "offline"
+ : "state unknown",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
+ ? ", out of sync" : "",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
+ printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_SMART_DATA:
+ printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
+ ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
+ break;
+
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
+ printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
+ ioc->name, disk);
+ break;
+ }
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
MpiDeviceInfo_t *pdevice = NULL;
+ /*
+ * Save "Set to Avoid SCSI Bus Resets" flag
+ */
+ ioc->spi_data.bus_reset =
+ (le32_to_cpu(pPP2->PortFlags) &
+ MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
+ 0 : 1 ;
+
/* Save the Port Page 2 data
* (reformat into a 32bit quantity)
*/
return rc;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mpt_toolbox - Generic function to issue toolbox message
- * @ioc - Pointer to an adapter structure
- * @cfg - Pointer to a toolbox structure. Struct contains
- * action, page address, direction, physical address
- * and pointer to a configuration page header
- * Page header is updated.
- *
- * Returns 0 for success
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
-{
- ToolboxIstwiReadWriteRequest_t *pReq;
- MPT_FRAME_HDR *mf;
- struct pci_dev *pdev;
- unsigned long flags;
- int rc;
- u32 flagsLength;
- int in_isr;
-
- /* Prevent calling wait_event() (below), if caller happens
- * to be in ISR context, because that is fatal!
- */
- in_isr = in_interrupt();
- if (in_isr) {
- dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n",
- ioc->name));
- return -EPERM;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
- pReq = (ToolboxIstwiReadWriteRequest_t *)mf;
- pReq->Tool = pCfg->action;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_TOOLBOX;
- pReq->Reserved1 = 0;
- pReq->Reserved2 = 0;
- pReq->MsgFlags = 0;
- pReq->Flags = pCfg->dir;
- pReq->BusNum = 0;
- pReq->Reserved3 = 0;
- pReq->NumAddressBytes = 0x01;
- pReq->Reserved4 = 0;
- pReq->DataLength = cpu_to_le16(0x04);
- pdev = ioc->pcidev;
- if (pdev->devfn & 1)
- pReq->DeviceAddr = 0xB2;
- else
- pReq->DeviceAddr = 0xB0;
- pReq->Addr1 = 0;
- pReq->Addr2 = 0;
- pReq->Addr3 = 0;
- pReq->Reserved5 = 0;
-
- /* Add a SGE to the config request.
- */
-
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4;
-
- mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr);
-
- dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n",
- ioc->name, pReq->Tool));
-
- /* Append pCfg pointer to end of mf
- */
- *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
-
- /* Initalize the timer
- */
- init_timer(&pCfg->timer);
- pCfg->timer.data = (unsigned long) ioc;
- pCfg->timer.function = mpt_timer_expired;
- pCfg->wait_done = 0;
-
- /* Set the timer; ensure 10 second minimum */
- if (pCfg->timeout < 10)
- pCfg->timer.expires = jiffies + HZ*10;
- else
- pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
- /* Add to end of Q, set timer and then issue this command */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_add_tail(&pCfg->linkage, &ioc->configQ);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- add_timer(&pCfg->timer);
- mpt_put_msg_frame(mpt_base_index, ioc, mf);
- wait_event(mpt_waitq, pCfg->wait_done);
-
- /* mf has been freed - do not access */
-
- rc = pCfg->status;
-
- return rc;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_timer_expired - Call back for timer process.
}
}
break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptbase_raid_process_event_data(ioc,
+ (MpiEventDataRaid_t *)pEventReply->Data);
+ break;
default:
break;
}
if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
int idx;
- idx = ioc->eventContext % ioc->eventLogSize;
+ idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
ioc->events[idx].event = event;
ioc->events[idx].eventContext = ioc->eventContext;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mpt_sp_log_info - Log information returned from SCSI Parallel IOC.
+ * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @mr: Pointer to MPT reply frame
* @log_info: U32 LogInfo word from the IOC
* Refer to lsi/sp_log.h.
*/
static void
-mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
+mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
u32 info = log_info & 0x00FF0000;
char *desc = "unknown";
EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
-EXPORT_SYMBOL(mpt_toolbox);
EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mpt_alt_ioc_wait);
+EXPORT_SYMBOL(mptbase_GetFcPortPage0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/