* These are the "new Hitachi style" interrupts, as present on the
* Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
*/
-
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-struct intc2_data {
- unsigned char msk_offset;
- unsigned char msk_shift;
-
- int (*clear_irq) (int);
-};
-
-static struct intc2_data intc2_data[NR_INTC2_IRQS];
-
-static void enable_intc2_irq(unsigned int irq);
-static void disable_intc2_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_intc2_irq disable_intc2_irq
-
-static void mask_and_ack_intc2(unsigned int);
-static void end_intc2_irq(unsigned int irq);
-
-static unsigned int startup_intc2_irq(unsigned int irq)
-{
- enable_intc2_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type intc2_irq_type = {
- .typename = "INTC2-IRQ",
- .startup = startup_intc2_irq,
- .shutdown = shutdown_intc2_irq,
- .enable = enable_intc2_irq,
- .disable = disable_intc2_irq,
- .ack = mask_and_ack_intc2,
- .end = end_intc2_irq
-};
static void disable_intc2_irq(unsigned int irq)
{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- /* Sanity check */
- if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1 << msk_shift,
- INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
+ struct intc2_data *p = get_irq_chip_data(irq);
+ ctrl_outl(1 << p->msk_shift,
+ INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset);
}
static void enable_intc2_irq(unsigned int irq)
{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- /* Sanity check */
- if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1 << msk_shift,
- INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
+ struct intc2_data *p = get_irq_chip_data(irq);
+ ctrl_outl(1 << p->msk_shift,
+ INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset);
}
-static void mask_and_ack_intc2(unsigned int irq)
-{
- disable_intc2_irq(irq);
-}
-
-static void end_intc2_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_intc2_irq(irq);
-
- if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
-}
+static struct irq_chip intc2_irq_chip = {
+ .name = "INTC2",
+ .mask = disable_intc2_irq,
+ .unmask = enable_intc2_irq,
+ .mask_ack = disable_intc2_irq,
+};
/*
* Setup an INTC2 style interrupt.
* PIO1 which is INTPRI00[19,16] and INTMSK00[13]
* would be: ^ ^ ^ ^
* | | | |
- * make_intc2_irq(84, 0, 16, 0, 13);
+ * { 84, 0, 16, 0, 13 },
+ *
+ * in the intc2_data table.
*/
-void make_intc2_irq(unsigned int irq,
- unsigned int ipr_offset, unsigned int ipr_shift,
- unsigned int msk_offset, unsigned int msk_shift,
- unsigned int priority)
+void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- unsigned int flags;
- unsigned long ipr;
-
- if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
- return;
-
- disable_irq_nosync(irq);
-
- /* Fill the data we need */
- intc2_data[irq_offset].msk_offset = msk_offset;
- intc2_data[irq_offset].msk_shift = msk_shift;
- intc2_data[irq_offset].clear_irq = NULL;
-
- /* Set the priority level */
- local_irq_save(flags);
-
- ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
- ipr &= ~(0xf << ipr_shift);
- ipr |= priority << ipr_shift;
- ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
-
- local_irq_restore(flags);
+ int i;
- irq_desc[irq].handler = &intc2_irq_type;
+ for (i = 0; i < nr_irqs; i++) {
+ unsigned long ipr, flags;
+ struct intc2_data *p = table + i;
- disable_intc2_irq(irq);
-}
+ disable_irq_nosync(p->irq);
-static struct intc2_init {
- unsigned short irq;
- unsigned char ipr_offset, ipr_shift;
- unsigned char msk_offset, msk_shift;
- unsigned char priority;
-} intc2_init_data[] __initdata = {
-#if defined(CONFIG_CPU_SUBTYPE_ST40)
- {64, 0, 0, 0, 0, 13}, /* PCI serr */
- {65, 0, 4, 0, 1, 13}, /* PCI err */
- {66, 0, 4, 0, 2, 13}, /* PCI ad */
- {67, 0, 4, 0, 3, 13}, /* PCI pwd down */
- {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */
- {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */
- {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */
- {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */
- {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */
- {78, 0, 8, 0, 11, 13}, /* DMAC ERR */
- {80, 0, 12, 0, 12, 13}, /* PIO0 */
- {84, 0, 16, 0, 13, 13}, /* PIO1 */
- {88, 0, 20, 0, 14, 13}, /* PIO2 */
- {112, 4, 0, 4, 0, 13}, /* Mailbox */
- #ifdef CONFIG_CPU_SUBTYPE_ST40GX1
- {116, 4, 4, 4, 4, 13}, /* SSC0 */
- {120, 4, 8, 4, 8, 13}, /* IR Blaster */
- {124, 4, 12, 4, 12, 13}, /* USB host */
- {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */
- {132, 4, 20, 4, 20, 13}, /* UART0 */
- {134, 4, 20, 4, 22, 13}, /* UART2 */
- {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */
- {140, 4, 28, 4, 28, 13}, /* EMPI */
- {144, 8, 0, 8, 0, 13}, /* MAFE */
- {148, 8, 4, 8, 4, 13}, /* PWM */
- {152, 8, 8, 8, 8, 13}, /* SSC1 */
- {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */
- {160, 8, 16, 8, 16, 13}, /* USB target */
- {164, 8, 20, 8, 20, 13}, /* UART1 */
- {168, 8, 24, 8, 24, 13}, /* Teletext */
- {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */
- {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */
- {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */
-#endif
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-/*
- * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
- */
- /* INTPRIO0 | INTMSK0 */
- {48, 0, 28, 0, 31, 3}, /* IRQ 4 */
- {49, 0, 24, 0, 30, 3}, /* IRQ 3 */
- {50, 0, 20, 0, 29, 3}, /* IRQ 2 */
- {51, 0, 16, 0, 28, 3}, /* IRQ 1 */
- /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
- /* INTPRIO4 | INTMSK0 */
- {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
- {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
- {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
- {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */
- {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */
- {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
- {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
- {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
- /* INTPRIO8 | INTMSK0 */
- {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
- {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
- {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
- {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
- {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
- {65, 8, 24, 0, 16, 3}, /* LCDC */
- /* 66, 67 unused */
- {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
- {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
- {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
- /* 71 unused */
- {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
- {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
- {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
- {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */
- {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */
- {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
- {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
- {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
- /* | INTMSK4 */
- {80, 8, 4, 4, 23, 3}, /* SIM_ERI */
- {81, 8, 4, 4, 22, 3}, /* SIM_RXI */
- {82, 8, 4, 4, 21, 3}, /* SIM_TXI */
- {83, 8, 4, 4, 20, 3}, /* SIM_TEI */
- {84, 8, 0, 4, 19, 3}, /* HSPII */
- /* INTPRIOC | INTMSK4 */
- /* 85-87 unused/reserved */
- {88, 12, 20, 4, 18, 3}, /* MMCI0 */
- {89, 12, 20, 4, 17, 3}, /* MMCI1 */
- {90, 12, 20, 4, 16, 3}, /* MMCI2 */
- {91, 12, 20, 4, 15, 3}, /* MMCI3 */
- {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/
- /* 93-107 reserved/undocumented */
- {108,12, 4, 4, 1, 3}, /* ADC */
- {109,12, 0, 4, 0, 3}, /* CMTI */
- /* 110-111 reserved/unused */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
-#ifdef CONFIG_SH_RTC
- { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-#endif
- { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
- { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
- { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
- { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ /* Set the priority level */
+ local_irq_save(flags);
- { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
- { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
- { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
- { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET +
+ p->ipr_offset);
+ ipr &= ~(0xf << p->ipr_shift);
+ ipr |= p->priority << p->ipr_shift;
+ ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET +
+ p->ipr_offset);
- { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
- { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
- { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
- { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
- { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
-#endif
-};
+ local_irq_restore(flags);
-void __init init_IRQ_intc2(void)
-{
- int i;
+ set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+ handle_level_irq, "level");
+ set_irq_chip_data(p->irq, p);
- for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
- struct intc2_init *p = intc2_init_data + i;
- make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
- p-> msk_offset, p->msk_shift, p->priority);
+ enable_intc2_irq(p->irq);
}
}
-
-/* Adds a termination callback to the interrupt */
-void intc2_add_clear_irq(int irq, int (*fn)(int))
-{
- if (unlikely(irq < INTC2_FIRST_IRQ))
- return;
-
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
-}
-
Code Review / linux-2.6.git / blobdiff